12 best pcb replacement for haywards

Product description

This main PCB is designed to use with Hayward Goldline OnCommand automation models ONCOM, ONCOM-ACT, ONCOM-RC, ONCOM-ACT-RC. Weight 2.6 pounds.

• Main pcb replacement
• Fits hayward goldline oncommand automation models oncom, oncom-act, oncom-rc, oncom-act-rc
• Weight 2.6 pounds

User questions & answers

Question:	Is there a warrenty
Answer:	I’m not positive about a warranty. I returned this product because it was not the product pictured. It did not work in my control panel.
Question:	Is there a warrenty
Answer:	30 days with Amazon. Not sure if the manufacturer will honor the warranty because you bought it through Amazon.
Question:	Where is the Product number found on the board itself
Answer:	I have a pic of the actual board if you want I can email it to you. The product number (PN) is written on one corner of the board. I guess it's the lower left corner of the board that faces out when it's installed.
Question:	What is the warranty for this board
Answer:	1 year

Product features

About Us

Our objective is to make your pool experience worry and hassle-free. That's why our equipment is engineered to work smart at keeping your pool sparkling clean and trouble free.

For over 80-years, we've been helping pool owners enjoy the pleasures of pool ownership by manufacturing cutting edge, technologically advanced pool equipment worldwide.

Our products include a complete line of technologically advanced pumps, filters, heaters, heat pumps, automatic pool cleaners, lighting, controls and salt chlorine generators-high-quality components engineered to work together.

About Us

Our objective is to make your pool experience worry and hassle-free. That's why our equipment is engineered to work smart at keeping your pool sparkling clean and trouble free.

For over 80-years, we've been helping pool owners enjoy the pleasures of pool ownership by manufacturing cutting edge, technologically advanced pool equipment worldwide.

Our products include a complete line of technologically advanced pumps, filters, heaters, heat pumps, automatic pool cleaners, lighting, controls and salt chlorine generators-high-quality components engineered to work together.

Product description

This main PCB is designed to use with all Hayward Goldline Aqua Logic automation and chlorination models AQL-PS-4, AQL-PS-8-V, AQL-PS-8 AQL-PS-16-V, AQL-PS-16.

• Main pcb replacement
• Fits hayward goldline aqua logic automation models pl-p-4, pl-ps-4, pl-ps-8-v, pl-ps-8, pl-ps-16-v, pl-ps-16
• Genuine hayward replacement part

User questions & answers

Question:	Will this work for a board with the number pn 066008g-1 rev:g. i'm not sure where to find if it's a p-4, ps-4..etc. it's for a aqua logic
Answer:	The circuit board # GLX-PCB-PRO works on all versions P-4, PS-4, PS-8. The only difference is the local display version.
Question:	Is this glx-pcb-pro a 4.3 revision or better
Answer:	It is better I have no problem and it was not hard to install, the money was worth it, a lot better then paying over 800.00 for it
Question:	Can I use this control board to upgrade my Aqua Logic AQL-PS-8 system? I would like to install a VSP pump and have in communicate with my system
Answer:	I don't see why not. But I don't know for sure. I run a swimmig pool and completely separate hot tub system with mine. No valves to redirect.
Question:	My operation manual say model PL-P-4 will this work on it
Answer:	The instruction sheet that comes with the Pro Logic GLX-PCB-PRO says that it is compatible with all Pro Logic P-4, PS-4 PS-8 and PS-16 units. It says the microprocessor software will automatically check the type of local display that is connected and adjust the Pro Logic features and operation to match the appropriate type. Hope this helps.

Product features

About Us

Our objective is to make your pool experience worry and hassle-free. That's why our equipment is engineered to work smart at keeping your pool sparkling clean and trouble free.

For over 80-years, we've been helping pool owners enjoy the pleasures of pool ownership by manufacturing cutting edge, technologically advanced pool equipment worldwide.

Our products include a complete line of technologically advanced pumps, filters, heaters, heat pumps, automatic pool cleaners, lighting, controls and salt chlorine generators-high-quality components engineered to work together.

Product description

GLX-PCB-TROL-HP is the Main Printed Circuit Board for AquaTrol HP & AquaTrol HP TL.

• Main PCB replacement
• Fits Hayward Goldline AquaTrol salt chlorine generator model aq-trol-hp & aq-trol-hp-tl
• Weight 2.3 pounds

User questions & answers

Question:	what all is included when purchasing this item
Answer:	The 30 inch length might be accurate when you buy it but it SHRINKS a lot after it is washed. I am 5’11” and normally wear a 30 length but not in this pant.
Question:	Does this work on. 9 cell
Answer:	This is beige khaki.
Question:	how to install a hayward aqua trol hp glx-pcb board
Answer:	These have a slightly elastic waistband. It is not the sliding-fit waistband.

Product features

About Us

Our objective is to make your pool experience worry and hassle-free. That's why our equipment is engineered to work smart at keeping your pool sparkling clean and trouble free.

For over 80-years, we've been helping pool owners enjoy the pleasures of pool ownership by manufacturing cutting edge, technologically advanced pool equipment worldwide.

Our products include a complete line of technologically advanced pumps, filters, heaters, heat pumps, automatic pool cleaners, lighting, controls and salt chlorine generators-high-quality components engineered to work together.

Product description

This main PCB is designed to use with Hayward Goldline Aqua Rite salt chlorine generator model AQR. Weight 25 pounds.

• Main Printed Circuit Board (PCB) replacement
• Fits Hayward Goldline AquaRite salt chlorine generators
• A licensed pool professional be contacted to assist with the selection and installation

User questions & answers

Question:	Will this replace part #066012C-1 rev C
Answer:	Should as long as they don't have the pits in them. I sliced water chestnuts and strawberries on my old one. Broke the wire on the strawberries.
Question:	Will this replace: printed on top of board, "Goldline Controls PN: G1-066604F-1" & printed on bottom: "PN: G1-066012C-1 REV: C". Thanks
Answer:	I would say No. They call it Flexicon but it is just a fancy name for plastic. I use it to slice strawberries but I think it would break if I tried to slice an onion with it
Question:	Software version: What is the software/firmware version on this
Answer:	It’s kinda small but eggs fit both ways. I had to cut off the ends for it to fit but the cut is great (for strawberries, mushrooms etc too). Easy to clean up and no wires to break. It’s sturdy too
Question:	All lights work, but S/cell not gen'ing chlor. (shows low salt) S/Cell 8 yrs old. Board is 1.33 so i cant just buy T-3 cell replacemt. Incompaitble w/ 1.33 I hear. Will this board allow me to buy T-3 replacement? Salt = 3300 when tested
Answer:	Blades are ¼ inch or 6mm apart and there are 7 of them. Tray size is approx 2inches x 2inches, or 50mm x 50mm. Inside measurements of top piece with blades is 2 ⅜inches x 2 ⅜inches or 60mm x 60mm. There is 10mm or 7/16inch in between the outside blade and the inside edge of the plastic rim. Overall length is 7 ½ inches. The blades are 3/16 inches or 5mm from top to cutting edge. It works very well- I use it on strawberries mostly. You have to push straight down as if it wiggles a little to the side, the cutting edge of the blade will hit the top of the ridges on the bottom half. This is really minor and I enjoy using the tool. A hint on cleaning, being a pipe smoker, I find that a pipe cleaner is good to clean the blade and the grooves on the bottom half with soapy water and then to also dry them as it is impossible with a towel. I think that not drying the blades eventually affects the sharpness of the blades, same as it does on a shaving razor. There is a small piece of plastic that goes around the handles to keep them in the closed position for storage and it easy to lose- I suggest putting some colored tape or red nailpolish on it to make it more visible and less likely to get misplaced. I highly recommend this kitchen tool ! This is probably more information than you wanted but that's me. Pity my peer wife ! MDT, SF, CA.

Product features

About Hayward

For over 80-years, Hayward has been helping pool owners enjoy the pleasures of pool ownership by manufacturing cutting edge, technologically advanced pool equipment worldwide. Our goal is that at the end of the day, your only concern is to turn your equipment on and off.

Product description

✅ QUALITY: This replacement AquaRite PCB is used by many pool professionals to get the customers salt system up and running! This circuit board is installed in your Aqua Rite control unit and communicates with your salt cell to effectively sanitize your pool water. ✅ COMPATIBILITY: This board is a replacement for the Hayward GLX-PCB Board. It is compatible with the Hayward Aquarite, Swimpure Plus, Pebble Technology Naturesoft, BioGuard’s Mineral Springs and the Goldline Salt System. ✅ DURABILITY: These main boards are tested by highly experienced engineers for Maximum PCB effectiveness. It is clear of all faults and guaranteed to work to its maximum potential. ✅ SATISFACTION GUARANTEE: 100% SATISFACTION GUARANTEE: Buy with confidence, as our premium quality heater display cover is built to last, and if you're not satisfied with it at anytime within 30 days of purchase, we'll provide a refund or replacement.

• ✅ QUALITY: This replacement AquaRite PCB is used by many pool professionals to get the customers salt system up and running! This circuit board is installed in your Aqua Rite control unit and communicates with your salt cell to effectively sanitize your pool water.
• ✅ COMPATIBILITY: This board is a replacement for the Hayward GLX-PCB Board. It is compatible with the Hayward Aquarite, Swimpure Plus, Pebble Technology Naturesoft, BioGuard’s Mineral Springs and the Goldline Salt System.
• ✅ DURABILITY: These main boards are tested by highly experienced engineers for Maximum PCB effectiveness. It is clear of all faults and guaranteed to work to its maximum potential.
• ✅ SATISFACTION GUARANTEE: 100% SATISFACTION GUARANTEE: Buy with confidence, as our premium quality heater display cover is built to last, and if you're not satisfied with it at anytime within 30 days of purchase, we'll provide a refund or replacement.

User questions & answers

Question:	Is this the same board as hayward glx-pcb-main
Answer:	No. This is for the AQR-PRO salt chlorination and chemical dispense system. GLX-PCB-MAIN is for AquaLogic control systems.
Question:	Will this work on a aql-ps-4 aqualogic autimation and chlorination system
Answer:	The Hayward GLX-PCB-AR-PRO Main PCB is the correct replacement only for Hayward AQR-PRO. The correct main board for the AQL-PS-4 is GLX-PCB-MAIN Main PCB, AquaLogic.
Question:	My hayward aqua rite pro just won't turn on. no display. the transformer is warm not hot like it use to be. is this the common part that goes bad
Answer:	Swap it out and that will let you know what is wrong - probably will fix the problem. MKe sure you get the right board as there are several versions of the almost same board. Call Hayward to make sure
Question:	Is this board a hayward original equepment replacement
Answer:	The Hayward GLX-PCB-AR-PRO Main PCB Replacement for Hayward AQR-pro Goldline Aqua Rite Pro is made by Hayward.

• Aftermarket replacement part for Hayward part number GLX-PCB-RITE Main PCB (printed circuit board).
• Fits the Hayward / Goldline Aqua Rite Saltwater Chlorinator. Also fits Naturesoft and Mineral Springs systems.
• Includes a 1 Year Full Warranty.
• Simple to install, consult owner's manual for instructions.
• Compatible only with the T-15 size salt cell.

User questions & answers

Question:	A replacement generic t-cell-15 says "for complete compatibility, a 1.5 or higher firmware version is required..." is this board compatible with v
Answer:	I know for a fact that it plugs into the wall but I’m not sure about if it can run on batteries. Hope this helped!
Question:	I have an aqua-rite, it looks like this. how can i tell this is the right part
Answer:	- General Size: 20" x 2.5" x 22"
Question:	Installed board. Program code reads 88.0 and cell rev v8.80. Where is reading for tcell. I have tcell
Answer:	Hello, in regards to your questions，please email our Customer Service Support for assistance.
Question:	I just replaced my salt cell with a hayward tcell 15. My salt reading is 1000 ppm off the actual salt level. Do i need to change the board out
Answer:	At least four, that's the most we ever played with. This item kept breaking and we're had to return. Poorly made.

Product features

OPTIMUM Compatability!

This AquaRite Main Circuit Board Replacement is designed to be completely compatible with the following Hayward/Goldline Salt Systems:

Product description

This main PCB is designed to use with Hayward Goldline Aqua Logic automation and chlorination models AQL-PS-4, AQL-PS-8-V, AQL-PS-8 AQL-PS-16-V, AQL-PS-16 and also compatible for wired remote control automation model AQL-SS-6B-BOX. Weight 48 pounds.

• Main Printed Circuit Board (PCB) replacement
• Fits Hayward Goldline AquaLogic Automation systems

User questions & answers

Question:	i have a goldline control PN G1-066008k-1. is this a replacement
Answer:	I replaced a G1-066008J-1 and it worked great.....I would think you be a direct replacement...likely just a revision code difference.
Question:	I cant get the cell to work at all no settings for it and had two multi colored wires i couldnt plug in the board , but everything said this would wo
Answer:	I just had same issue. I'm guessing 3 1/2 years later you've solved - but here's the fix: Hit the right arrow by the menu button, until it says Configuration Menu - Locked. Hold the left and right arrows beside the Menu button for about 5 seconds, until it changes to "Configuration Menu-Unlocked". Then, right arrow to the option that says your chlorinator is disabled - and enabled it. That will allow you to have salt readings and chlorinate. Review all the settings to ensure your Cell is the right type, as well, for instance (or else the cell could likely be damaged).
Question:	What is the manufacture date and version of the board
Answer:	Ours is Rev 2.90. Manufacture date is not on the box but can guarantee you that it is very recent.
Question:	We got the board and hooked it up but it says communication erro
Answer:	Call Hayward tech service at 908 355 7995 and they will give you instruction.M-F 8:00 to 5:00. Hope this will help.

Product features

About Hayward

At Hayward, we're more than just equipment. Our objective is to make your pool experience worry and hassle-free. That's why our equipment is engineered to last and work smart at keeping your pool sparkling clean and trouble free.

For over 80-years, we've been helping pool owners enjoy the pleasures of pool ownership by manufacturing cutting edge, technologically advanced pool equipment worldwide. We strive to ensure that your Totally Hayward System operates at maximum efficiency all season long. Our goal is that at the end of the day, your only concern is to turn your equipment on and off. Whether you are trying to create the perfect backyard environment, reduce operating and maintenance costs through the ease of wireless controls, Hayward is your single source solution. Our products include a complete line of technologically advanced pumps, filters, heaters, heat pumps, automatic pool cleaners, lighting, controls and salt chlorine generators—high-quality components engineered to work together to keep your pool.

• PCB Main and display board is compatible with Hayward Goldline AquaRite, SwimPure, AquaRite XL, NatureSoft, SmartPure, Mineral Springs and Blue Essence Systems. Our cell can't be compatible with Hayward automation system.
• Compatible with Hayward part number GLX-PCB-RITE Main PCB board and GLX-PCB-DSP display PCB.
• Not work with Hayward automated systems. Blue Works PCB Main Circuit Board & PCB Display Board Bundle isn't produced or sold by Hayward.
• Compatible with Hayward AquaRite T-CELL-15, T-CELL-9, T-CELL-5 and T-CELL-3
• 1 year warranty and professional customer service

User questions & answers

Question:	I have just received the unit and installed it, who do I contact for questions
Answer:	Please call us at 888 9O9 O457 if you have any questions.
Question:	Will this board work with hayward pn g1-066012f-1 rev a
Answer:	Maybe
Question:	My current board is a hayward goldline aquarite pn: 066012c-1 rev. c, will this unit replace this
Answer:	That is what we have and it worked fine but the part you purchased has a customer service number you can call also
Question:	Does anyone know the software version for this
Answer:	This is equivalent to the r.1.59.

Product description

Hayward GLX-PCB-DSP display PCB is designed to use with Hayward Goldline Aqua Rite salt chlorine generator model AQR and also compatible with Hayward Goldline Aqua Trol salt chlorine generator models AQ-TROL-RJ, AQ-TROL-RJ-TL, AQ-TROL-HP, AQ-TROL-HP-TL.

• Display pcb replacement
• Fits hayward goldline aqua rite salt chlorine generator model aqr
• Also fits hayward goldline aqua trol salt chlorine generator models aq-trol-rj, aq-trol-rj-tl, aq-trol-hp, aq-trol-hp-tl
• Weight 8 Ounce

User questions & answers

Question:	Does it work with board version
Answer:	Yes, mine have worked perfectly together.
Question:	Do the display and main boards come with any warranty
Answer:	One year warranty
Question:	where can I get those plastic standoffs that holds the display to the pcb
Answer:	I would have suggested radio shack but most are closed if you have a frys or altec ...most computer repair or electronic stores.
Question:	will this work with a t-15 cell
Answer:	Yes.That's the T-cell I have and works fine .

Product description

Blue Works PCB Display Board Compatible with Hayward AquaRite Display PCB (GLX-PCB-DSP). This board can work with Hayward Goldline T-Cell-15, T-Cell-9 , T-Cell-3.

• Display board compatible with Hayward Goldline AquaRite System.
• Compatible with Hayward part number GLX-PCB-RITE and GLX-PCB-DSP display PCB.
• Not work with Hayward automated systems. Blue Works PCB Display Board isn't produced or sold by Hayward.
• Compatible with Hayward Goldline AquaRite T-CELL-15, T-CELL-9, T-CELL-5 and T-CELL-3
• 1 year warranty and professional customer service.

Product description

Blue Works main replacement board will compatible with Hayward Goldline AquaRite, SwimPure, AquaRite XL, NatureSoft, SmartPure, Mineral Springs and Blue Essence Systems. This PCB main board is not designed to work with Hayward automation systems. It is compatible with 110V/220V. If you have a Hayward automated system, this board will not work with your control. The device is easy to install, so you don’t need to worry about the installing. If any question while you found it didn't work, don't hesitate to message us.

• Compatible with Hayward Goldline AquaRite, SwimPure, AquaRite XL, NatureSoft, SmartPure, Mineral Springs and Blue Essence Systems.
• Compatible with Hayward part number GLX-PCB-RITE Main PCB board
• Compatible with Hayward AquaRite T-CELL-15, T-CELL-9, T-CELL-5 and T-CELL-3
• Not work with Hayward automated systems. Blue Works PCB Main Circuit Board isn't produced or sold by Hayward.
• 1 year warranty and live customer support.

User questions & answers

Question:	My digital disolay is shoeimg r14 version affer i replaced with thos main pcb board. Will itbstill work? Seems to be off on actual salt levels
Answer:	That happens sometimes with a PCB board swap-out you can actually program your salt content to match with the actual pool salt content using the display board. Just Google Adjusting the salt display on your aqua rite or whatever brand you're using
Question:	Anyone have any trouble recalibrating the salt level with this pcb? it won't "countdown" the salt level for me to set using the superchlor switch
Answer:	Did you set it for the right salt generator? The manual tells you how to do it. Then It worked great for me.
Question:	is this compatible with the Hayward Aquatrol and T 5 cell
Answer:	The device did not work with my t-5. I returned the device.
Question:	I am getting error e000 , --ee and my display is fading. my display board works just fine (moved it back to old board to test. anyone have this issue
Answer:	Dear Valued Customer, thank you for your question. Please refer to the SALT Calibration 1. Take the main switch from Auto to Off . 2. Push Diagnostic button until salt calibration appear “E000”. 3. Adjust the chlorine output to 100%. Turn the knob back to the 50% position. When the “E” letter starts to flash, you can continue to adjust the salinity. 4. The machine can be adjusted to +-800PPM. "-E100" means minus 100PPM, "E100" means plus 100PPM. 5. After adjusting the salinity, push Diagnostic button, when see “--AA”, the salt calibration is set.

Product description

This control unit is designed to use with Hayward Goldline Aqua Rite salt chlorine generator model AQR.

• Control unit replacement
• Fits hayward goldline aqua rite salt chlorine generator model aqr
• Genuine hayward replacement part

User questions & answers

Question:	Is this something that is "plug and play" ? Does it require expertise to install
Answer:	No son muy grande, yo por lo general soy talla M no me gustan muy ajustada, pero esta talla L me quedaron perfectas y son cómodas y frescas...
Question:	I cannot tell if i currently i have a aqr or aqrxl. how can i found out, or will your model work for both
Answer:	When I purchased it said bikini but I received briefs so definitely high cut briefs
Question:	Will this work with hayward turbo cell glx-cell-9-w
Answer:	They stay in place on the rear (no picking) and does the tummy roll slightly, not enough to notice or be annoyed
Question:	Will this work will T Cell
Answer:	The coverage is reasonable, at least for me. Should you want more coverage, perhaps a boy-short or regular fit brief (no high cut).