14 best heat pool pumps
Heat pool pumps, often referred to as pool heat pumps or swimming pool heat pumps, are essential components in pool heating systems. They are used to efficiently heat swimming pool water, allowing pool owners to enjoy a comfortable swimming experience even when the weather is cooler. Here's what you should know about heat pool pumps:
Function: Heat pool pumps are designed to extract heat from the surrounding air and transfer it into the pool water. This process involves a refrigeration cycle, which compresses and releases a refrigerant gas to absorb and release heat energy. This makes them an energy-efficient choice for pool heating.
Efficiency: Heat pool pumps are known for their energy efficiency. They can provide a high level of heating while consuming relatively low amounts of electricity. This makes them a cost-effective and environmentally friendly choice for maintaining comfortable pool temperatures.
Environmental Impact: Heat pumps do not rely on the combustion of fossil fuels, making them a cleaner and more environmentally friendly option for pool heating compared to gas or oil heaters.
Compatibility: Heat pool pumps are compatible with various types of pools, including in-ground and above-ground pools. They are suitable for both residential and commercial pool applications.
Temperature Range: Heat pumps are effective at maintaining pool water temperatures within a comfortable range. However, their efficiency can vary depending on the ambient air temperature. They work best in moderate to warm climates and may require a backup heating source for extremely cold conditions.
Installation: Installing a heat pool pump typically involves connecting it to the pool's filtration system and electrical supply. Professional installation is recommended to ensure proper setup and operation.
Sizing: Choosing the right-sized heat pool pump is essential for efficient heating. Factors such as pool size, climate, and desired temperature affect the sizing process. A pool professional can help determine the appropriate size for your pool.
Maintenance: Heat pumps require regular maintenance to ensure optimal performance. This includes cleaning the air coils, checking for refrigerant leaks, and cleaning or replacing air filters.Routine maintenance can extend the lifespan of the pump and maintain its efficiency.
Cost: While heat pool pumps have a higher upfront cost compared to some other heating options, their energy efficiency can lead to long-term savings on energy bills. The exact cost can vary depending on the size and brand of the heat pump.
Noise Level: Heat pumps are generally quieter than gas heaters during operation. However, they do produce some noise, so placement and noise considerations should be taken into account when installing one near living spaces or neighbors.
Warranty: Most heat pool pumps come with warranties from manufacturers. Be sure to review the warranty terms and conditions when purchasing a unit to understand what is covered and for how long.
Heat pool pumps are an effective and energy-efficient way to extend your swimming season and enjoy your pool comfortably. When considering the installation of a heat pump, it's advisable to consult with a pool professional to assess your specific needs and ensure that the chosen pump is appropriate for your pool and climate.
Below you can find our editor's choice of the best heat pool pumps on the market
FibroPool FH120 Above Ground Swimming Pool Heat Pump
Product description
Compact, lightweight 20,000 BTU/hr Heat pump for Small pools and Spas. Above Ground pools up to 18' Round. Spas-any size. 120 volts-60HZ USA voltage Heat and cool modes. Highest efficiency in the industry 4.81 COP. Union connectors and hose adapters are included for 1 1/2" pvc plumbing, and hoses. Foot print: 36" x16", weighs 100lbs
- 120 Volt, 60Hz, 10A draw
- Built in 8 foot long power cable with standard USA plug
- Suitable for pools up to 7500 gallons in coastal climates
- Plug into an GFCI protected outlet
User questions & answers
| Question: | Do you think this heater working together with a solar set up would be enough for a 21 ft above ground? I don't want to run a 220v line |
| Answer: | We have a 24 x 52 above ground pool and the 110v keeps our pool in Seattle area at a cozy 84. Adding a solar set up would make it even better, but it just may be extra work that is not necessary. We would rate this heater a 10 if we could. |
| Question: | Is this enough for 3000 galloons pool in syracuse area ( north ny) or should go with larger btu |
| Answer: | Yes it will be more than fine I live in buffalo and have a 10,000 gallon pool in 3 days went from 61 degrees to 83degrees |
| Question: | What is the best time of day to run this heat pump |
| Answer: | WE have a 18ft above ground pool. We run the filter pump and the heat pump syster 24/7. I keeps the water at about 92-94 degrees all the time. Cost to run is about $25 per month. We are located in central Ohio |
| Question: | Can this be used for salt water pools |
| Answer: | Yes, it is completely compliant with Salt water pools |
Product features
Sleek Design
Slim profile, weather-proof case is designed to accommodate a variety of placement options. Easy side access to standard fittings minimizes install time and hassle.
Clean, Efficient Electricity
The FibroPool FH120 is powered by clean electricity, reducing the harmful environmental effects of traditional, gas-powered heat pumps. Industry experts have meticulously designed the FH series heat pumps to be the most energy-efficient in their class, operating for an average of ~16 cents per hour.
Extend Your Swimming Season
The FH120 will ensure comfortable swimming conditions down to an outdoor temperature of 40°F, extending your swimming season by months.
FibroPool FH 220 Swimming Pool Heater Heat Pump
Product description
Compact, lightweight 20,000 BTU/hr Heat pump for Small pools and Spas. Above Ground pools up to 18' Round. Spas-any size. 220 volts-60HZ USA voltage Heat and cool modes. Highest efficiency in the industry 4.85 COP in its class. Union connectors and hose adapters are included for 1 1/2" pvc plumbing, 1 1/2" or 1 1/4" hoses. Foot print: 36" x16", weighs 100lbs
- 4.85 COP. Best in its class
- 20,000 Btu/Hr heating capacity
- Suitable for pools up to 7,500 gallons in coastal climates
- Suitable for ALL Hot Tubs
- 240 Volts- 60 HZ American Voltage
User questions & answers
| Question: | How difficult is this to install |
| Answer: | Very simple to get install. |
| Question: | I just unboxed mine and hooked it up (professional electrician and all). It runs fine, but isn’t producing warm/hot water after several hours. Help |
| Answer: | Hi, the heat pumps take a while for initial heating. without knowing your pool size, location etc, its difficult to estimate the performance. But please be patient. they work slow, but they work well. Yavuz |
| Question: | I have 15’ intex pool with 2800 gph intex pump with 1 1/2” connections, and heat pump heated only 1f in 24 hours. do i need a bypass valve |
| Answer: | No need for a bypass valve. please connect it after the filter, before the salt system ( skimmer- pump- filter- heat pump- salt generator- return to pool) , if you have it. Otherwise, Skimmer- pump- filter- heat pump- return to pool |
| Question: | Will this unit control the pump too? On off timer |
| Answer: | This unit will not control them. It will not run unless the pump is running. So in reality the pump controls the heater. By the way the heater is awesome. I live in Albany ny. Pool was in mid 80’s Memorial Day after open 1 week. |
Hayward W3HP21104T Pool Heat Pump, 110,000 BTU
Hayward
Product description
Hayward’s high-performance, energy-efficient HeatPro 110,000 BTU Heat Pump quietly and economically maintains ideal water temperature at all times. HeatPro features the industry's only standard Ultra Gold corrosion-resistant evaporator fin, which provides extreme durability, especially in coastal environments. Its compact design allows for easy installation and service on new or existing pools, too. Complete with a titanium counter-flow heat exchanger for maximum heat transfer and excellent salt water and chemical corrosion resistance, HeatPro is a great way to extend your swim season.
- The Hayward HeatPro 110,000 BTU Heat Pump quietly and economically maintains ideal water temperature at all times
- Ultra Gold corrosion-resistant evaporator fin offers unparalleled durability, even in harsh coastal environments.
- Titanium counter-flow heat exchanger ensures maximum heat transfer and provides excellent salt water and chemical corrosion resistance
- Profiled fan blade and heavy-duty scroll compressors ensure efficient air flow with minimal noise, making any backyard environment instantly more relaxing
- Injection-molded UV-resistant body panels are impervious to corrosion and deterioration
User questions & answers
| Question: | Thermostat reading air above it not the water temp how do I change it to read water temp |
| Answer: | Seems like ours reads the water temp only while running. |
| Question: | Winter cover needed |
| Answer: | Yes, it keeps winter debris out. |
| Question: | Can i put this unit in my 10x10 pool shed |
| Answer: | I wouldn't advise putting it inside an enclosure. It needs good air circulation to work properly. It's made to be out in the open with the exception of maybe covering it in the off season if you live where you have harsh winters. |
Product features
HeatPro Heat Pumps
Hayward HeatPro heat pumps incorporate titanium counter-flow heat exchangers for unrivaled and uncompromising performance – even under the harshest conditions.
Other premium features include:
Profiled Fan Blade
Ensures efficient air flow and quiet operation.
Acoustic Compressor Cover
Quiet technology minimizes compressor sound level.
Corrosion-Resistant Evaporator Fin
Provides extreme durability in coastal environments.
Titanium Heat Exchanger
Designed for durability, efficiency and longer product life.
Hayward W3HP21004T Pool Heat Pump, 95,000 BTU
Product description
Hayward’s high-performance, energy-efficient HeatPro 90,000 BTU Heat Pump quietly and economically maintains ideal water temperature at all times. HeatPro features the industry's only standard Ultra Gold corrosion-resistant evaporator fin, which provides extreme durability, especially in coastal environments. Its compact design allows for easy installation and service on new or existing pools, too. Complete with a titanium counter-flow heat exchanger for maximum heat transfer and excellent salt water and chemical corrosion resistance, HeatPro is a great way to extend your swim season.
- Acoustic compressor cover and profiled fan blade ensures quiet operation and efficient performance
- Ultra-Gold corrosion resistant evaporator fin for extreme durability especially in coastal environments
- Titanium heat exchanger designed for maximum heat transfer, efficiency and reliability
- Durable injection molded UV-resistant body panels that are impervious to rust and deterioration
- 2in x 2 1/2in CPVC Union Plumbing Connections - Common union for installation or service, adapts to larger plumbing recommended for greater efficiencies
User questions & answers
| Question: | I bought the hayward hp21404t and the connector nuts for the inlet and outlet were not in the customer kit. how can i get these? i can't hook up an |
| Answer: | Pinch a penny pool and spa carries a kit. Around $70 |
| Question: | How easy is it to install this heater, I am not a handy man and wondering if I can install it myself. can you please tell |
| Answer: | This heater is fairly easy to install if you are a DIY but don't attempt this is you are not a handy man (or woman). I was replacing an older (15 years old) Jandy Heat Pump so I already had the power and plumbing changes were a bit tricky (since this unit installs plumbing from back whereas Jandy installed plumbing from front). I did have my son help me move the unit from my driveway back to the pad (about 50 feet) since it weighs nearly 300 lbs - used a hand-cart/dolly and my son for stability. I also put plywood adjacent to pad temporarily to allow for easier sliding of the unit off the pallet it comes on and onto the pad. |
| Question: | Will this unit heat my 25' x 50' pool. It's about 35 - 40,000 gallons and I'm in southern NH |
| Answer: | The 140,000 Btu unit will heat a large pool. Of course a strong wind can take away 50,000 Btu's per day easy. Cover it to retain the most heat.For home use, and because the compressor draws 27 amps, you do not want to purchase a larger heat pump. But you could connect two of them, if the pump flow is sufficient for both units. I would install one, and see how well it works. If you find that it is not warming it enough in the early spring, then a second unit might be required. Chances are that if you run it 24/7 for a week, it will take the pool from 70F to 84F, and you will be happy with one heat pump. Your home wiring might not be large enough to support a pair of these heat pumps, and the cooling system for the house all running at once.Good luck! |
| Question: | How much does this affect your electric usage/bill |
| Answer: | You need to run an analysis at Hayward's website on the cost for your specific sized pool, in your region/zip code, at the temperature you want it to run at in order to understand your monthly costs. They have a very useful app for this. You also have to decide whether to cover it or not (not covering it results in energy bills 2x as high and depending where you live the heater might not keep up all year). In central Texas with an 18000 gallon pool, running the heat pump year round, with a water temperature of 86 degrees, electricity cost of 11 cents/kWh (you might have lower cost), and covered the cost per year is $1676.15. This is inexpensive relative to alternatives - natural gas would be $5265, propane would be $6852, and standard electric would be $8551. The monthly range for my pool is a high of $334.37 in January and $0 in July. As far as hourly, at an hourly rate of 11 cents/kWh the 140k Btu heater uses 7.2kW input so hourly running cost would be 79.2 cents.The cost really depends on the area. It's very reasonable compared to alternative heating options because you have the efficiency of the heat pump. I was very happy with it. |
Product features
HeatPro Heat Pumps
Hayward HeatPro heat pumps incorporate titanium counter-flow heat exchangers for unrivaled and uncompromising performance – even under the harshest conditions.
Other premium features include:
Profiled Fan Blade
Ensures efficient air flow and quiet operation.
Acoustic Compressor Cover
Quiet technology minimizes compressor sound level.
Corrosion-Resistant Evaporator Fin
Provides extreme durability in coastal environments.
Titanium Heat Exchanger
Designed for durability, efficiency and longer product life.
Zodiac R3002900 Water Temperature Sensor Replacement for Select Zodiac Jandy Air Energy Pool and Spa Heat Pumps
Zodiac
Product description
This water temperature sensor is designed to use with Zodiac Jandy Air Energy AE-Ti and EE-Ti pool and spa heat pump models AE1000, AE1500, AE2000, AE2500, AE3000, EE1500, EE2000, EE2500, EE3000 and also compatible with Zodiac Jandy Air Energy 2, super and magnum pool and spa heat pump model XE2550, 550 SETI.
- Water Temperature Sensor Replacement
- Fits Zodiac Jandy Air Energy Ae-Ti And Ee-Ti Pool And Spa Heat Pump Models Ae1000, Ae1500, Ae2000, Ae2500, Ae3000, Ee1500, Ee2000, Ee2500, Ee3000
- Also Fits Zodiac Jandy Air Energy 2, Super And Magnum Pool And Spa Heat Pump Model Xe2550, 550 Seti
- Country Of Origin: United States
User questions & answers
| Question: | Is there an O-ring for this sold separately |
| Answer: | Hi Terry,Thanks for reaching out. The o-ring is included in this kit. We hope this response was helpful. Please let us know if you have any other questions.Best Regards,Zodiac Pool SystemsManufacturer of Jandy, Polaris, and Zodiac products |
| Question: | Is the air temperature sensor the same as the water temperature sensor |
| Answer: | No it is not. The water temperature sensor is a probe in the the water flow The air temperature sensor is a different part |
Hayward W3SP3206VSP TriStar VS Variable-Speed Pool Pump, 1.85 HP
Hayward
Product description
Hayward’s TriStar VS 1.85 HP Variable-Speed Pool Pump belongs to the TriStar family—the most energy-efficient pumps among leading brands, according to EPA ENERGY STAR third-party testing. It offers energy savings of up to 90%, or $1500 per year, with a super-efficient, ultra-quiet permanent magnet totally enclosed fan-cooled motor and integrated electronic drive. In addition, its all-in-one controller compatibility makes it easy to integrate with any new or existing automation system. From installation to operation, it’s one of the industry’s easiest, most efficient pump upgrades.
- The Hayward TriStar VS Variable-Speed 1.85 HP Pool Pump provides the ultimate in energy efficiency, saving up to 90%, or $1500 per year, on energy costs—and may be eligible for local utility rebates, too
- Designed to replace most full-rate high-performance pumps up to 1.5 full-rate or 2.0 max-rate HP
- Permanent magnet, totally enclosed fan-cooled motor offers more efficient operation and long-lasting reliability
- No-rib, extra-large basket design ensures easy leaf and debris removal and extends time between cleanings
- Integrated, programmable digital interface with 24-hour programmable clock provides simple, intuitive operation
User questions & answers
| Question: | Should I be looking at other variable pumps if I have an existing 1-1/2" pvc system? If so what do you recommend |
| Answer: | My pump is hooked into an 1 1/2" system so you should be fine. |
| Question: | Will the sp3206vsp work with blue haven/goldline pl-p-4-x288 smart control |
| Answer: | It only requires power (in my case 220v). It has its own speed and timer controls so the goldline unit only has to run the other items. |
| Question: | Is it okay to connect this to a 1-1/2" pvc system via adapters, or should i look at a pump that is native |
| Answer: | The Hayward SP3202VSP TriStar VS Variable-Speed Pool Pump includes a union connection kit which fits to either 2" or 2-1/2" PVC. This can be adapted to 1-1/2" PVC, but would restrict the pump's output to the capacity of 1-1/2" PVC. |
| Question: | what is the difference between these two pumps the hayward sp3200vsp tristar vsp and the hayward sp3202 tristar vsp |
| Answer: | sp3200vsp is stand alone ONLY mode of operation (a 1 trick pony). The SP3202VSP can be used in ALL modes (stand alone, with Hayward automation like Omni- and Pro-Logic, or with 3rd party automation via relays. So, it more versatile and ideal if you think you may add automation later (you won't need a new pump) |
Product features
TriStar VS
The TriStar VS will pay for itself faster than larger, more expensive variable-speed models. It is the variable-speed pump that’s specifically designed to replace most high performance pumps such as Pentair WhisperFlo, Sta-Rite Max-E-Glas & Dura-Glas, as well as Hayward TriStar.
Unparalleled Energy Efficiency
With industry-leading energy-efficient hydraulics, an integrated variable-speed control and permanent magnet motor, the TriStar VS creates the right flow at the right time. This advanced technology can save owners up to 90% a year on pool related energy costs when compared with ordinary single-speed pump installation. Plus, its ENERGY STAR rating means owners may be eligible for rebates from their local power companies. TriStar VS is the perfect fit for owners’ pools—and wallets.
ZZP 240V 3KW Electric Water Heater Thermostat SPA Bath Heater Pump,Premium Quality Water Heater Thermostat Swimming Pool Thermostat Portable Pool Heater
Product description
Swimming Pool fit for Thermostat 240V Pool fit for Thermostat Heater 3KW Pool SPA Bath Hot Tub Electric Water Heater fit for Thermostat
Introduction:
Fit for Thermostat is designed specifically for the needs of the Jacuzzi, the fit for thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the fit for thermostat automatically heating insulation, the bath water temperature maintained at 30-40℃ adjustable, it can give your massage bathtub to create a comfortable environment.
Normal Operation:
The operation of the fit for thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the fit for thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the fit for thermostat, and the heating-up indicator turns off. There is no separate heat controller for user.
P.S:Please refer to the instruction manual for specific installation procedures,thank you !!
Note:
Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less.
The fit for thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents.
Fit for Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be install.
Package Content
1 x Water Heating Thermostat
2 x Interface
1 x Manual
- Note:It is 240V 3KW,only made for US.1.【Automatic Heating】This thermostat is designed specifically for the hot tub, adopted Flow Temperature Sensor TechnologyThe sensor is always under the control of the single-chip microcomputer to accurately and timely monitor the temperature status of the entire heating system and the flow.the water temperature bath maintained at 22-50 degrees Celsius, give your Jacuzzi to create a more comfortable environment
- 2.【Intelligent Self-checking System】Comprehensively monitor the operating status of the system, and quickly make appropriate judgments and displays, thereby avoiding poor water flow, dry fuel and other failures in the absence of water, and more convenient for the user or maintenance personnel to judge and maintain the fault.
- 3.【High Quanlity】The heating thermostat liner material is 316# stainless steel and the electric heating tube provided by Duan Baker Company which has good corrosion resistance (chlorine corrosion).
- 4.【Multiple Protections】The Pool Heater has multiple protections, safety and reliability - over-current, ultra-high temperature, short circuit to the power supply line, and water flow protection.
- 5.【ST Series Pool Heaters】 special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating.This product adopts latest constant temperature controller- -temperature sensor replaces traditional magnetic flow switch,it improves greatly of trouble free in working time, adaptability of water environment and stability.
User questions & answers
| Question: | Cómo funciona en una red de 110v |
| Answer: | The little ones don’t but are great |
| Question: | For what size pool and how many gallons of water will it heat |
| Answer: | I don't think it's a problem with newer TVs they don't have an actual picture tube.I have it under my 58 inch Samsung and it touch the bottom with no problem. |
| Question: | Does this also act as a pump |
| Answer: | Get one with large amp or get a separate amp at least 200 wpc. I'd go for the biggest amp you can afford if you want the best sound. AVR recievers have a hard time powering these. They do ok on my Onkyo txrz820 130wpc 2 channels driven, but they do way better with my 400wpc amp |
| Question: | Will a 1000GPH intex pump provide enough flow for this heater |
| Answer: | ( SL-28`s ) Each one is H-33.9'' W-9.8'' D-12.2'' , Buy 2 for stereo quaulity for your system .Me , im buyin a pair bout a week 1/2 . I really like the Cerwin Vega brand . |
WEATHER-OUT Pool Heat Pump Cover
Product description
Weather-Out Heat Pump Cover protects your pool heat pump from the elements such as rain/snow/ice and even sun!
- Heat pump cover made of high quality PVC with nonwoven lining to absorb moisture
- Universal design to fit ALL manufactures of heater pumps: ONE SIZE FITS ALL!
- Works with existing pluming and installs in minutes!
- Dimensions: 34" Length X 34" Width X 43" Height
- Weather-Out pool heat pump covers adjust to size using adjustable straps and cinch drawstrings
User questions & answers
| Question: | can I use this to protect my hot tub pump while it’s running all winter |
| Answer: | I would not use this when the heat pump is running. It is meant for covering the unit when it is not running to keep debris out. |
| Question: | will this fit a Pentair Pool Heat Pump that measures 31x37x |
| Answer: | It should fit that model. On the 37" measurement are you including the pipe plumbing because our cover has velcro adhesive that goes around the plumbing not covering the plumbing. Therefore it covers the heat pump not al the plumbing. The Weather-Out heat pump dimensions are 34" X 34" X 43" |
Raypak H000029 Digital Control Board for RHP 5350, 6350 and 8350 Heat Pumps
Product description
Control board
- Replacement part for Raypak 2350, 5350, 6350, and 8350 heat pumps
- Includes: one control board and installation instructions
Puri Tech Quiet Heat 50,000 BTU Digital Heat Pump up to 16,000 Gallons with Savings Optimizer and QZ Quiet Technology for Quiet Operation Simple and Easy
- Ideal for Pools up to 16,000 Gallons
- Durable weatherproof cabinet made for long-lasting use.
- Savings Optimizer saves up to $2,000 a year, extends the life of the pump, and reduces the noise of the system.
- QZ Quiet Technology for quiet operation.
- Simple and easy to use control panels include lockout security and an automation friendly system.
Product features
Puri Tech Quiet Heat 50,000 BTU Digital Heat Pump
The Puri Tech Quiet Heat is a high quality titanium and long lasting pool heater. The Quiet Heat controls the temperature in your pool, while also saving energy and maintaining quiet operation. We ensure the Quiet Heat is the best way to heat your pool or spa, no matter what temperature it is outside!
An Inside Compressor and Optimizer that Saves you Money!
Puri Tech Quiet Heat Heater have an inside compressor system that includes a ATT titanium tube with advanced turbulation and a EAF (Enhanced Aluminum Fins) evaporator coil. These two specs as well as the Savings Optimizer will allow you to save as much energy as possible, which in turn, saves you money. A common myth in the pool heater world is that slowing down the water flow will make your pool warmer. This heater busts this myth and proves that a medium water flow will not only make your pool warmer, but also save you dollars.
Lasting from Season to Season
Puri Tech Quiet Heat Heaters are made of high grade cooper as well as a long-lasting, durable weatherproof cabinet to last from season to season.
Cutting Edge Electrical Technology
These heaters have titanium heat exchange construction, digital temperature control, 2 & 3-Wire Remote Capability, and Titanium burst & Nitrogen leak testing to over 450 PSI. We do a 64-point inspection process for quality control. These allow for a quiet operation and lots of savings!
Climate Shield OSCS-HPC Heat Pump Covers
Climate Shield
Product description
Climate Shield Covers are Universal. "One Size Fits All" by designing "Hook and Loop" seams, adjustable straps and cinch drawstrings into each cover; you can adjust the cover to custom fit any make or model of Pool Heater or Heat Pump. High Quality, Durable Polyvinyl. Made to Last for Years. Keeps your Pool Heater or Heat Pump away from the corrosive environment that destroys your asset. The cover is made of heavy, high quality polyvinyl and lined with a non-woven cloth material to absorb moisture and prevent the polyvinyl from sticking to equipment (even in the hot sun). Vented panels on each side of the cover allows air flow to prevent condensation. Patent Pending. Easy to Install. Takes only a few minutes to protect all winter long. Works with existing plumbing. No need to disconnect existing plumbing or heater parts.
- Polyvinyl exterior to shed environmental elements
- Mesh inserts on each side for ventilation
- Non woven lining to absorb moisture and prevent polyvinyl from sticking
- Hook and loop to adjust around existing plumbing
User questions & answers
| Question: | What is the warranty on this cover |
| Answer: | We have this over our pool lp gas heater, which it is more than big enough for. The dimensions of the pool heater are 32" across, 30" deep and 27" high. Plus there are pipes coming out of it. Like I said there is cover to spare. It is not a perfect fit but it sure does protect it from our many rainstorms (rust)here in Florida. Hope this helps. |
| Question: | what color is it |
| Answer: | 1.5CBM,about 400 Gallons maximun. Thank you and hope for your order! |
| Question: | How does it fit over pipes that come out of the side |
| Answer: | The pool heater special used for small pool less than 12CBM,3200 Gallon massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating.This product adopts latest constant temperature controller- -temperature sensor replaces traditional magnetic flow switch,it improves greatly of trouble free in working time, adaptability of water environment and stability. |
| Question: | What are its dimensions |
| Answer: | 75A. Thank you and hope for your order! |
Patiolife Pool Heat Exchanger 135 KBtu/h Tube Shell Heat Exchanger Same Side Ports 1 1/2" & 1" FPT Pool Heat Exchanger Stainless Steel Swimming Pool Heat Exchanger for Marine Swimming Pool Solar Spa
Product description
Stainless Steel Pool Heat Exchanger Stainless Steel Material
Constant Temperature
High Efficient Heat Exchanger
Superior Safety
key Features
304 Stainless Steel Material
This salt pool heat exchanger is made from stainless steel to ensure that the pump is highly resistant to corrosion.
Continuous Constant Temperature
The stainless steel heat exchanger features continuous constant temperature and can transfer heat indirectly between any hot water circuit, steam circuit, and any pool or spa application.
Hot Immediately
The heat exchanger has an innovative spiral-twisted that can maximize to increasing the overall thermal efficiency of the system. Hot immediately and no need to wait.
135 kBtu Heat Exchanger
Pool heating capacity up to 135 kBtu/hr fresh pool based on 60°C (140°F) temperature difference between incoming heating and heated water.
Safety Protection
The hot and cold fluids can be exchanged through the exchanger wall to complete the heat exchange, which is safe and away from hidden dangers such as electricity leakage and fire.
Wide Application
Widely used for swimming pools, spas, hot tubs, solar, hydronic heating, oil cooling, heat recovery, snow melting, etc.
Specification
Material: 304 Stainless Steel
Output: 135 kBtu/hr
Heat Transfer Area: 3.2 ft²
Hot Water Flow Volume: 25 L/min
Cold Water Flow Volume: 200 L/min
Hot Water Tube Side: 1" FPT
Same Side Ports: 1 1/2" FPT
Weight: 15lbs (7kg)
Package & Content
1 x Stainless Steel Heat Exchanger
2 x Holding Brackets
- 【STAINLESS STEEL MATERIAL】- Made of high-grade anti-corrosion stainless steel, the pool heat exchanger is rust- and saltwater resistant, and thus highly durable and perfect for chlorine or saltwater pools and spas. 1 1/2" FPT same side for pool water and 1" FPT for hot water.
- 【CONSTANT TEMPERATURE】- The salt swimming pool heat exchanger features an innovative spiral-twisted to ensure continuous constant temperature and can transfer heat indirectly between any hot water circuit, steam circuit and any pool or spa application.
- 【HIGH EFFICIENT HEAT EXCHANGER】- The shell and tube heat exchanger is capable of 135 kBtu/hr fresh pool based on 60°C (140°F) temperature difference between incoming heating and heated water. Hot immediately and no need to wait.
- 【SUPERIOR SAFETY】- This heat exchanger is a very safe, reliable, efficient and cost-effective way to heat a swimming pool or spa from any hydronic system.
- 【VARIOUS APPLICATIONS】- The heat recovery pool heater is perfect for swimming pools, spas, hot tubs, solar, hydronic heating, oil cooling, heat recovery, snow melting, etc
User questions & answers
| Question: | how does this suppose to work? What is the heat source |
| Answer: | I'm guessing you are supposed to hook it up to its own heat source but again, there is no cord or outlet or way of attaching it to anything. Everyone I showed had no idea how to hook this up so it was a huge waste of money! My mom passed away so I missed the window to return it. Do NOT buy this item! Very misleading. Sorry I can't help more. |
| Question: | What else would I need to heat my 9x12 above ground pool |
| Answer: | I’m sure there are multiple was to install these. I tapped into a hot water line using a circulation pump and is controlled by a mechanical ball. |
Product features
304 Stainless Steel Material
This salt pool heat exchanger is made from stainless steel to ensure that the pump is highly resistant to corrosion.
Continuous Constant Temperature
The stainless steel heat exchanger features continuous constant temperature and can transfer heat indirectly between any hot water circuit, steam circuit, and any pool or spa application.
Hot Immediately
The heat exchanger has an innovative spiral-twisted that can maximize to increasing the overall thermal efficiency of the system. Hot immediately and no need to wait.
135 kBtu Heat Exchanger
Pool heating capacity up to 135 kBtu/hr fresh pool based on 60°C (140°F) temperature difference between incoming heating and heated water.
Safety Protection
The hot and cold fluids can be exchanged through the exchanger wall to complete the heat exchange, which is safe and away from hidden dangers such as electricity leakage and fire.
Wide Application
Widely used for swimming pools, spas, hot tubs, solar, hydronic heating, oil cooling, heat recovery, snow melting, etc.
Stainless Steel Pool Heat Exchanger
The swimming pool heat exchanger of the same side ports is fully composed of high-grade anti-corrosion stainless steel. It features an innovative spiral-twisted to ensure continuous constant temperature and can transfer heat indirectly between any hot water circuit, steam circuit, and any pool or spa application. This heat exchanger is a very reliable, efficient and cost-effective way to heat a swimming pool or spa from any hydronic system.
IIS 3KW 220V 240V Electric Water Heater Thermostat SPA Bath Heater Pump,Premium Quality Water Heater Thermostat Swimming Pool Thermostat Portable Pool Heater
Product description
Swimming Pool fit for Thermostat 240V Pool fit for Thermostat Heater 3KW Pool SPA Bath Hot Tub Electric Water Heater fit for Thermostat
Introduction:
Fit for Thermostat is designed specifically for the needs of the Jacuzzi, the fit for thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the fit for thermostat automatically heating insulation, the bath water temperature maintained at 30-40℃ adjustable, it can give your massage bathtub to create a comfortable environment.
Normal Operation:
The operation of the fit for thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the fit for thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the fit for thermostat, and the heating-up indicator turns off. There is no separate heat controller for user.
P.S:Please refer to the instruction manual for specific installation procedures,thank you !!
Note:
Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less.
The fit for thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents.
Fit for Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be install.
Package Content
1 x Water Heating Thermostat
2 x Interface
1 x Manual
- Note:It is 240V 3KW,only made for US.1.【Automatic Heating】This thermostat is designed specifically for the hot tub, adopted Flow Temperature Sensor TechnologyThe sensor is always under the control of the single-chip microcomputer to accurately and timely monitor the temperature status of the entire heating system and the flow.the water temperature bath maintained at 22-50 degrees Celsius, give your Swimming Pool to create a more comfortable environment
- 2.【Intelligent Self-checking System】Comprehensively monitor the operating status of the system, and quickly make appropriate judgments and displays, thereby avoiding poor water flow, dry fuel and other failures in the absence of water, and more convenient for the user or maintenance personnel to judge and maintain the fault.
- 3.【High Quanlity】The heating thermostat liner material is 316# stainless steel and the electric heating tube provided by Duan Baker Company which has good corrosion resistance (chlorine corrosion).
- 4.【Multiple Protections】The Pool Heater has multiple protections, safety and reliability - over-current, ultra-high temperature, short circuit to the power supply line, and water flow protection.
- 5.【ST Series Pool Heaters】 special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating.This product adopts latest constant temperature controller- -temperature sensor replaces traditional magnetic flow switch,it improves greatly of trouble free in working time, adaptability of water environment and stability.
User questions & answers
| Question: | How do I troubleshoot this heater? Received it as a gift. Worked perfect for 4 days. Now the heat light stays on always but no heat |
| Answer: | 1. Please check the following if the machine is not working (1) Will the heating indicator light be on? (£ yes → check (5) £ no → check (2)) (2) Check whether the machine power supply has 220V (L, N) single-phase power or 240V (L1, L2) dual-phase power (£ yes → check (3) £ no → please check whether the power switch and wiring are connected correctly) (3) Check whether the water pressure is within the range (>20 gallons/min<120 gallons/min) (£ 120 gallons/min → electric heating tube will make a sound) (4) Check if there are too many bends in the installation pipeline, the distance between the pipeline and the swimming pool is too long, and the power of the circulating water pump is too small (0.75HP and above) (5) Check whether the manual reset switch pops up (£ yes → please reset and check the following conditions ①②③ £ no → check (6)) ①Whether it is installed according to the correct installation method in the manual, and whether the thermostat is below the lowest water level ②Whether the valve installed at the water outlet is not open ③Whether the original temperature of swimming pool water exceeds 60℃ (6) Check whether the electric heating tube is damaged Detection method: 1. Check whether the voltage at both ends of the electric heating tube is 220V-240V (the voltage is damaged) 2. The multimeter detects that the resistance value is lower than 20M for leakage |
| Question: | Will this work for a 10,000 gallon above ground pool |
| Answer: | No,it can't Pls buy it from this link: https://www.amazon.com/gp/product/B08PYWWGK9 Thank you and hope for your kindness! |
| Question: | Can this work for a 26" above ground pool...our pool is sooooo |
| Answer: | Yes，it can. Thank you and hope for your kindness |
Zodiac R3001300 Control Panel Assembly Replacement for Select Zodiac Jandy Air Energy Pool and Spa Heat Pumps
Zodiac
Product description
This control panel assembly is designed to use with Zodiac Jandy Air Energy AE-Ti and EE-Ti pool and spa heat pump models AE2000, AE2500, AE3000, EE2000, EE2500, EE3000 and also compatible with Zodiac Jandy Air Energy super pool and spa heat pump model 550 SETI.
- Control panel assembly replacement
- Fits Zodiac Jandy Air Energy AE-Ti pool and spa heat pump models AE2000, AE2500, AE3000
- Also fits Zodiac Jandy Air Energy super pool and spa heat pump model 550 SETI
User questions & answers
| Question: | How difficult is this to install |
| Answer: | Not difficult at all. What I did was unscrew the old panel and before disconnecting i took a picture with my phone just so i made sure everything was connected correctly. Took like 5-10 min this way. Very easy. |
| Question: | Will it work with a XE |
| Answer: | Not sure. We used it for a Jandy heat pump AE-Ti. Found the replacement part number in the manual for it. Good luck. |
| Question: | Will this control board work on model E2000T |
| Answer: | Hi, Amazon Customer, Thank you for your question. Unfortunately, we do not manufacture an E2000T Heat pump. We do manufacture an AE2000 heat pump. The R3001300 is the correct replacement for the controller on the AE2000 Heat pump. We hope this response was helpful. Please let us know if you have any other questions. Best Regards, Zodiac Pool Systems Manufacturer of Jandy, Polaris, and Zodiac products |
| Question: | the lcd screen is attached to the controller correct, also I have an AE 3000T is this compatible |
| Answer: | Hi, Amazon Customer, Thank you for your question. That is the incorrect part number. You want R3008800 for the AE heat pump. We hope this response was helpful. Please let us know if you have any other questions. Best Regards, Zodiac Pool Systems Manufacturer of Jandy, Polaris, and Zodiac products |
Latest Reviews
View all
Elf Orange Lipsticks
- Updated: 22.05.2023
- Read reviews
Test Strips
- Updated: 30.01.2023
- Read reviews
Desk Lights
- Updated: 19.05.2023
- Read reviews
Stephen King Audible Books
- Updated: 01.04.2023
- Read reviews
Gatorade Energy Powders
- Updated: 27.07.2023
- Read reviews