8 best diving boards

Product description

The Frontier III Residential Board is intended for moderate to heavy duty use on residential pools. It features an anti-slip tread for maximum safety and comes in 6', 8' and 10' lengths. Weight capacity is 250 lbs.

From the Manufacturer

S.R. Smith's 6-Feet Frontier III replacement board has a durable acrylic outer body, a non-slip, sanded tread and is pre-drilled with two holes for ease in installation. With hand-laid fiberglass and resin roving over a laminated wood runner acting as the board's skeletal frame, the Frontier III board will provide years of fun and safety on residential pools. It features the same non-slip, sanded tread as seen on other S.R.Smith boards. Will retrofit onto the following S.R.Smith stands - Flyte-Deck II, 606 Cantilever, 656 Supreme and the U-Frame. All S.R.Smith boards come with a how-to diving instructional video to ensure maximum safety when using your board.

• Matching tread
• SureFoot non-slip tread for maximum safety
• Will retrofit onto the following S.R.Smith stands - Flyte-Deck II, 606 Cantilever, 656 Supreme, Salt Jump Stand and the U-Frame
• Stainless Steel Hardware - resists corrosion. Weight capacity is 250 pounds
• WARNING: Make sure your pool meets or exceeds size requirements for this board - Using the wrong board/stand combination may result in death or serious injury.
• Its important that your replacement diving board is from the same brand/manufacturer as the one being replaced
• Corrosion-resistant stainless steel hardware is included

User questions & answers

Question:	I have a 20 years old SR smith cantilever base and need a new board. I cannot find a product number, but it does have the 12 bolt to bolt spread
Answer:	I bought the s r smith 66-209-596S2 Frontier 3 Replacement a year ago. It 6 feet long with 12 inch bolt hole spacing. It is radiant white. It should be suitable for your pool.
Question:	My board is only 70" long. Is that considered a 6' long board
Answer:	Yes it is. It is just shy by about 1 inch, but yes it is considered a six foot board.
Question:	I have a base with holes that are 10 inch on center can i use this board
Answer:	No you can't. The holes in the board are 12 inches on center.
Question:	I have an existing, unknown brand u frame stand and board. How can i be sure this replacement board is compatible with my existing stand
Answer:	Will retrofit onto the following S.R.Smith stands - Flyte-Deck II, 606 Cantilever, 656 Supreme, Salt Jump Stand and the U-Frame S.R. Smith 69209001 606/608 Cantilever Steel Diving Board Base with Jig White (Stand) S.R. Smith 69209026 Smith 6' (Spring Assembly) I would say if the board you have now has this type of stand and a u-bolt spring setup like the ones I have listed here. It will work fine. I wou

Product features

Jack Knife

Karate Kick

Cannonball

Freestyle

Is Your Pool Diving Board Compliant?

Safety First. Please consult the ANSI/APSP information at the top of this product page, and a pool professional prior to installing a diving board on any in-ground pool.

Product description

The Cantilever is our premium jump board, manufactured of heavy-duty metal. The Cantilever comes in two sizes so you can find the proper size for your diving pool. Available in a variety of designer and premium colors that blend into your backyard decor. From the powder coated steel to the durable scratch-resistant acrylic this jump board is built to last for years. Each diving board features a high-grade, slip-resistant sand tread for maximum safety, and comes with an instructional diving video to promote safety when diving in your pool. Available in 6' or 8' lengths. Weight capacity is 250 lbs. Boards available with white or matching tread. Sandstone board comes with Taupe base and springs.

From the Manufacturer

S.R. Smith's Cantilever jump stand with Frontier III board offers users great diving fun! This board and stand package comes with a diving board, jump stand, jig (for concrete mounting) and 2 springs. The steel stand is powder coated for long product life. The Frontier III board is intended for light to moderate use on residential swimming pools. Frontier III boards consist of one, wide laminated, wood core runner that extend along the entire length of the board. The board's durable acrylic outer surface will not scratch or fade - providing many years of recreational enjoyment. 250-Pound weight limit

• Board and stand combination
• High-strength steel is powder coated for long product life
• Board has a matching, SureFoot non-slip tread for maximum safety
• Contains the diving board, stand, and all necessary hardware required for installation.
• S.R.Smith has been the leading diving board manufacturer for over 75 years

User questions & answers

Question:	What is the dimensions of the bolt holes on the base , I need to make sure it's the same as the bolts in my decking
Answer:	12 inches square.
Question:	i am looking for hardware for the cantilever jump stand that i just had repainted but the bolts were rusted the kit I saw was $273 for four bolts
Answer:	Look at the parts manual and go to home depot or a hardware store and spend $20 or less for the parts.
Question:	How far apart are the bolts
Answer:	Yes, they are 12" from center of hole. Length and width are the same, it is a square pattern.
Question:	What are the dimensions of the base
Answer:	The base jig is 12" square.

Product description

Inter-Fab's 6-foot Duro Beam aquaboard is our number one selling diving board. It is constructed of two extra thick Douglas fir laminated wood core runners with fiberglass and resin protective outer coating for superior strength. The outer shell is comprised of durable uv protected acrylic with a non-slip sand tread surface for added safety. The diving board comes pre-drilled with two holes and stainless steel hardware. Available in four colors: white with white top tread, blue with white top tread, tan with tan top tread, and gray with gray top tread. 250 pound weight limit. Intended for light to moderate use on residential swimming pools. The diving board comes complete with instructions or just go to inter-fab.com to view a comprehensive assembly and installation video. Made in the United States and has a three year warranty. All Inter-Fab products must be installed in strict accordance to the manufacturer's safety guidelines and installation specifications.

• 6-Foot Board Length
• Durable Non-Fading, Skid Resistant Acrylic Surface
• Fiberglass Reinforced for Superior Strength
• 250-Pound weight limit. Compatible with La Mesa 8 feet, Los Arcos 8 feet, U-Stand 12 inch and U-Stand 18 inch
• All Inter-Fab products must be installed in strict accordance to the manufacturer's safety guidelines and installation specifications

User questions & answers

Question:	Does board come with bolts
Answer:	The board comes with the board-to-base mounting hardware.
Question:	What is the difference between db8bw and ds8bw models
Answer:	i do not know, my kid's love this board, i also replaced the piece that goes under the board., on the front mount
Question:	Does this diving board come with the stand
Answer:	No it is only the board and mounting hardware
Question:	Does this diving board fit on the inter fab techni-spring base
Answer:	I’m sorry, don’t know what a inter fab techni-spring base is.

Product features

Duro-Beam Diving Board

Inter-Fab's Duro Beam aquaboard is Intended for light to moderate use on residential swimming pools. The diving board comes complete with instructions or just go to inter-fab to view a comprehensive assembly and installation video. Made in the United States. All Inter-Fab products must be installed in strict accordance to the manufacturer's safety guidelines and installation specifications.

Dive with Confidence

Constructed of two extra thick Douglas fir laminated wood core runners with fiberglass and resin protective outer coating for superior strength. The outer shell is comprised of durable uv protected acrylic with a non-slip sand tread surface for added safety. The diving board comes pre-drilled with two holes and stainless steel hardware.

White

White Top Tread.

Blue

White Top Tread.

Gray

Grey Top Tread.

Tan

Tan Top Tread.

Product description

Provides protection from weather and prevents staining and damage to the diving board during the Winter months. Our cover offers a rip-proof cover helps prevent damage to ice, snow, sun, winter and debris. Constructed of rugged vinyl. Helps extend the life of your diving board Easily installs and holds securely on the board Universal cover will fit all 8' ft length diving boards Note: Diving board sold separate Color: Black

• Provides protection from weather and prevents staining and damage to the diving board during the Winter months.
• Our cover offers a rip-proof cover helps prevent damage to ice, snow, sun, winter and debris. Constructed of rugged vinyl.
• Helps extend the life of your diving board. Easily installs and holds securely on the board
• Universal cover will fit all 8' ft length diving boards.
• Note: Diving board sold separate Color: Black

User questions & answers

Question:	whats the youngs modulus of this board
Answer:	Dude it’s a diving board !!! Really ?
Question:	Does the cover the underside of the board
Answer:	Don’t waste your money. Cover only lasted one season
Question:	I noticed two reviews stated it does not fit an 8 foot board. Does it
Answer:	This fits my 8 foot diving board
Question:	Is the interior lined
Answer:	No
Question:	does this base and bard come with a jig
Answer:	Yes. Jig is made out of rebar with bolts welded at proper locations. I didn't want jig because I was installing into existing deck so I cut off rebar and used bolts with high strength epoxy that I bought at Lowe's. (You will need to drill 1 1/4" holes at proper locations in existing deck if you already have a deck.)
Question:	Do I need a jig if I am replacing my old base
Answer:	Generally no. However it depends on the base. Coupon code is available. Thank you for your question. FamilyPoolFun 320 695 2899
Question:	Does this item include board, base and jig that is put in when concrete is being poured
Answer:	Yes, this item includes the board, stand and all necessary hardware required for installation which includes the jig that is installed in the concrete.
Question:	diving board jigs fresh concrete
Answer:	New board came with jig. Went ahead and had someone cut up the deck and poured in new. Was best option for long run. 250 was about right for mine as well although you may have a hard time finding someone to take the liability. Glad I did not do it myself. I have jumped on it. It is solid. (215 lbs.)
Question:	Where can I purchase the stand
Answer:	You can purchase any Inter-Fab products through your local pool dealers in your area, or through various on-line companies.
Question:	Does this board have a solid wood center
Answer:	No it does not
Question:	this is the part number I was given by SR Smith but my base has the bolts 12" apart will this model work with my stand
Answer:	We bought this board and the bolt holes are only 4.5 inches apart, which worked for us, but doesn't sound like it would work for you.
Question:	Board doesn’t seem to have much bounce, I bought a 8 ft board and have a rigid stand, what can I do
Answer:	The DS8WW diving system is considered an active diving system.

Product features

Jack Knife

Karate Kick

Cannonball

Freestyle

Is Your Pool Diving Board Compliant?

Safety First! Please consult the ANSI/APSP information at the top of this product page, and a pool professional prior to installing a diving board on any in-ground pool.

Product description

TrueTread diving boards feature a revolutionary board surface that provides a modern, sporty look that is easy on the feet. Made with durable, marine grade diamond shaped composite material that stands up to salt, sun and hours of fun.

• REINVENTING THE DIVING BOARD - S.R.Smith makes an old favorite new again with a revolutionary new board surface that provides a modern, sporty look to any pool
• EASY ON THE FEET - Made with durable, marine-grade diamond shaped composite, this board offers exceptional launching grip while keeping feet happy
• TRANSFORM YOUR POOL - TrueTread replacement boards are an ideal upgrade for your pool. They are compatable with multiple S.R.Smith stands and can be easily installed.

User questions & answers

Question:	does this come with mounting hardware
Answer:	Comes with bolt kit only, plastic bushings not included.
Question:	Is this diving board compatible with an inter-fab base
Answer:	I am not sure but if you call Jason at S.R Smith he will be able to tell you, also their web site shows what boards can be used with bases , S.R Smith is a great Co with great people and products most of all a company that cares about their customers.
Question:	How far apart are the insulation holes
Answer:	The holes are 12" apart.
Question:	what is the weight limit for this board
Answer:	The weight limit is 250 lbs.

Product features

Is Your Pool Diving Board Compliant?

Safety First! Please Consult The Ansi/Apsp Information At The Top Of This Product Page, And A Pool Professional Prior To Installing A Diving Board On Any In-Ground Pool.

Product description

S.R. Smith's Frontier III Diving board and Supreme jump stand combination adds supreme diving fun to your pool! This board and stand package comes with a diving board, jump stand, jig (for concrete mounting) and 2 springs. The Supreme stand is formed from durable, scratch-resistant acrylic, ensuring a long life. The Frontier III board is intended for light to moderate use on residential swimming pools and cuff one, wide laminated, wood core runner that extend along the entire length of the board. The board's durable acrylic outer surface will not scratch or fade - providing many years of recreational enjoyment. 250-Pound weight limit. Your board and stand combination also comes with an instructional diving video to ensure maximum safety when diving in your pool.

From the Manufacturer

S.R. Smith's Frontier III Diving board and Supreme jump stand combination adds supreme diving fun to your pool! This board and stand package comes with a diving board, jump stand, jig (for concrete mounting) and 2 springs. The Supreme stand is formed from durable, scratch-resistant acrylic, ensuring a long life. The Frontier III board is intended for light to moderate use on residential swimming pools and cuff one, wide laminated, wood core runner that extend along the entire length of the board. The board's durable acrylic outer surface will not scratch or fade - providing many years of recreational enjoyment. 250-Pound weight limit. Your board and stand combination also comes with an instructional diving video to ensure maximum safety when diving in your pool.

• Board and stand combination
• Board has a matching, SureFoot non-slip tread for maximum safety
• Contains the diving board, stand, and all necessary hardware required for installation.
• S.R.Smith has been the leading diving board manufacturer for over 75 years

User questions & answers

Question:	Does it have the salt friendly hardware
Answer:	If you have a salt pool, you should S.R. Smith 68-211-5962 Salt Pool Jump System, 8-Feet, White.
Question:	My s.r. smith 68-209-61624 656/658 supreme jump stand with 6-foot frontier iii diving board, gray granite is on order. is there a copy of the jig
Answer:	Thank you for your question. There is a jig diagram and some measurements in the Installation Manual found in the Product Information section at the bottom of this Product page. If you need information in addition to what is presented there, please contact our Customer Care team at 800.824.4387 or via email at [email protected].
Question:	Does it come with the springs? Is this all I need to purchase for a complete installation
Answer:	Yes, it comes with everything for a complete installation including the bolt cage to place in the concrete when the base is poured
Question:	I currently do not have a diving board, do I have to saw cut the cement
Answer:	If the concrete is thick enough you could get some concrete anchors and use epoxy for concrete anchors. to use the anchors supplied with the board you would have to remove some of the existing concrete.

Product description

True Tread diving boards feature a revolutionary board surface that provides a modern, sporty look that is easy on the feet. Made with durable, marine grade diamond shaped composite material that stands up to salt, sun and hours of fun.

• REINVENTING THE DIVING BOARD - S.R.Smith makes an old favorite new again with a revolutionary new board surface that provides a modern, sporty look to any pool
• EASY ON THE FEET - made with durable, marine-grade diamond shaped composite, this board offers exceptional launching grip while keeping feet happy
• TRANSFORM YOUR DECK - Flyte Deck II stands and True Tread diving boards are an ideal upgrade for your pool.
• AVAILABLE IN DESIGNER COLORS to match your pool slide and backyard decor
• Accommodates adults and children up to 250 pounds; comes in both 6 foot and 8 foot lengths; hardware included

User questions & answers

Question:	Does the diving board and base come with new mounting kit
Answer:	Yes, the Flyte Deck II stand and TrueTread board combo come with the mounting kit. You can find detailed information on the Amazon product page under 'Technical Specifications'.
Question:	Does this include the Jig, and all hardware
Answer:	Yes. This product includes the Flyte Deck II base, 8' TrueTread diving board, jig and all the hardware necessary for an installation. Thank you for submitting your question - we are going to update information on our product page to include more details and also add installation manual. Meanwhile, please feel free to visit our website, srsmith.com, for more information.
Question:	Does it come with jig mount
Answer:	Yes it does. Board, base, jig and stainless hardware.
Question:	I bought this but it says it's for the pool before concrete is poured. My pool already has concrete can I use this or do I need a different base
Answer:	The base comes with a "jig" that would go in before the concrete is poured. With that being said this can still be installed if you purchase the epoxy anchor kit (75-209-5876-SS) and drill into the existing concrete. Hope this helps.

Product description

Olympic Diving Board Repair and Resurfacing Kit. The diving board resurface kit is for refinishing old, worn diving board surfaces. Each kit contains one quart of Convoy epoxy nonslip coating, one textured roller cover, one pint of solvent and an instruction sheet. According to the manufacturer, one kit contains sufficient material for 25 sq. ft. Color: Bikini Blue.

• Helps provide safe footing to worn out diving boards
• Contains one quart of Super Convoy, one pint of thinner, one roller cover, and complete instructions
• Can be applied to fiberglass, aluminum or wood with excellent results

User questions & answers

Question:	Will this work for a 10’ x 2’ diving board
Answer:	Yes