13 best ground heaters

Product description

EH0304: The high watt density in Powerblanket Ground Thawing Blankets enables you to thaw ground in really cold weather. This line of Powerblanket flat blankets provides a higher watt density and hotter temperature than the concrete curing blankets they resemble. The higher temperatures are ideal for ground thawing applications and curing epoxy or resins too, for that matter. Powerblanket has changed the conventional method of transferring heat. The revolutionary new design provides uniform heat across the entire blanket, eliminating any hot and cold spots. Powerblanket extra hot products thaw frozen ground, keep vehicle or equipment engines warm, and effectively melt dangerous ice dams. Powerblanket provides a maintenance-free heating solution, which reduces downtime, eliminates hassle and saves money. Heats to a preset 150°F ± 10°F / 65°C ±5°C. Melt snow and ice from roofs, walkways, and construction areas. Provides higher heat control when combined with a thermostatic controller. Certified by ETL to UL & CSA safety standards.

User questions & answers

Question:	Could this be used on a mobility scooter that will be outside (under a carport) in Michigan
Answer:	This Powerblanket is not recommended for use on a mobility scooter. The item is 4' x 5x in dimension. We would recommend finding a product of much smaller size for your specific application.
Question:	What is the wattage it draws
Answer:	The model number EH0304 will draw only 3.33 amps. The wattage is 400 watts.
Question:	Can it be used on the roof of my car before and during a snowstorm
Answer:	I would not do it. Small amounts of snowmelt would run down and would freeze again in inconvenient spots like windshields/windows/doors and create more of a hassle. It's better to just brush off the snow.
Question:	What is the estimated time to take out frost per inch of frost
Answer:	On average, using our Extra Hot Ground Thawing Powerblankets will thaw between 6 to 12" per 24 hrs which depends on wind speed, ambient temperature, and soil type. Some customers have stated they have had more than 12" thawed in 24 hrs in certain conditions.

Product features

Why Choose Powerblanket Ground Thawing & Curing Blankets?

* Heats to a preset 150 degree Fahrenheit ± 10 degree Fahrenheit / 65.5 degree Celsius ±5 degree Celsius.

* Melt snow and ice from roofs, walkways, and construction areas.

* Provides higher heat control when combined with a thermostatic controller.

* High watt density thaws frozen ground .

* Quickly remove frost prior to concrete pour.

* Reduces cold weather related downtime.

* Saves time, money and labor.

Curing Epoxy Resins

Curing epoxy resins with Powerblanket is easy and efficient! Most epoxy resin and hardener combinations require heat in order to cure since ambient temperatures are not high enough. If the epoxy resins are not heated high enough and evenly enough, the chemical, mechanical and heat resistance properties become compromised. In fact, some epoxy resins require heating in steps to prevent overheating from exothermic reactions.

Here's How Powerblanket Can Make Your Epoxy Curing Process Easier:

* Powerblanket Curing Blankets keeps resins at optimal temperatures during the curing process.

* Powerblanket Curing Blankets preheat molds prior to application.

* Powerblanket Curing Blankets cure epoxy with even heat spreading technology.

* Powerblanket Curing Blankets heat critical materials safely without damaging or compromising them.

Hear What One of Our Loyal Customers Had To Say

"Powerblanket Extra Hot Curing Blankets have simplified the post-curing process for our composite parts. Quick and easy to use on a variety of different shaped parts. The Powerblanket heaters have significantly decreased our setup time and operating costs, saving us several thousand dollars on our current carbon-fiber project. The Powerblanket team was responsive, and the blankets shipped quickly. I'm very glad we came across the amazing new technology."- Richard A. Difede

High Watt Density Thaws Frozen Ground

Quickly Remove Frost Prior To Concrete Pour

Melt snow and ice from roofs, walkways, & construction sites

Our Even Heat Spreading Technology Burns Up The Competition

Product description

This patio heater is constructed from metal that makes it sturdy & durable. This electric infrared heater comes equipped with a metal cage & Carbon fiber heating element. It features an anti-tilt switch for added safety. Instead of using a propane or oil-fired patio heater to warm up your patio, This heater uses regular household electricity & is less expensive to operate than a propane patio heater. The heater generates 1500W of heat. It can be used indoors as well as outdoors. This is the perfect way to easily bring the heat where ever you go. This electric patio heater from Hiland requires some assembly before it can be used & is ETL certified.

• Ground heater
• Comes with ground cage
• Can be used indoors and outdoors
• Powered by electricity

User questions & answers

Question:	does this product come with a remote
Answer:	No. It uses the small propane canisters.

Product description

Specification:



Available area: 10-15m3



Power: 11 KW



Current: 220-240V 50A,



Voltage: AC 240V



Wire: 3x16 mm



Net Weight: 7.5 kg



Features:



1.Adopted flow temperature sensor technology.



A.The sensor is always under the control of the single-chip microcomputer to accurately and timely monitor the temperature status of the entire heating system and the flow of water, ensuring that the user sets the water temperature while the heating element works reliably under the proper flow conditions.



B.No mechanical switching sensor - Avoids series of switch failures due to mechanical switch failures.



C.Avoids sensor failure due to accumulation of calcium (scale), magnetic substances, hair and suspended matter in water.



D.Reduce water circulation during non-heating, extending the service life of the circulation pump and be more energy-efficient.



2.Intelligent self-checking system. Comprehensively monitor the operating status of the system, and quickly make appropriate judgments and displays, thereby avoiding poor water flow, dry fuel and other failures in the absence of water, and more convenient for the user or maintenance personnel to judge and maintain the fault.



3.The heating thermostat liner material is 316# stainless steel and the electric heating tube provided by Duan Baker Company which has good corrosion resistance (chlorine corrosion).



4.Special design of the thermostat liner, good circulation, no slag, easy removal.



5.The machine is easy to maintain, easy to replace the original electrical components, fewer external lines, low installation costs.



6.The thermostat is simple to operate, convenient to observe, and overall appearance.



7.The thermostat has multiple protections, safety and reliability - over-current, ultra-high temperature, short circuit to the power supply line, and

• Note:It is 240V,only made for US.1.【Automatic Heating】This thermostat is designed specifically for the hot tub, adopted Flow Temperature Sensor TechnologyThe sensor is always under the control of the single-chip microcomputer to accurately and timely monitor the temperature status of the entire heating system and the flow.the water temperature bath maintained at 22-50 degrees Celsius, give your Jacuzzi to create a more comfortable environment
• 2.【Intelligent Self-checking System】Comprehensively monitor the operating status of the system, and quickly make appropriate judgments and displays, thereby avoiding poor water flow, dry fuel and other failures in the absence of water, and more convenient for the user or maintenance personnel to judge and maintain the fault.
• 3.【High Quanlity】The heating thermostat liner material is 316# stainless steel and the electric heating tube provided by Duan Baker Company which has good corrosion resistance (chlorine corrosion).
• 4.【Multiple Protections】The Pool Heater has multiple protections, safety and reliability - over-current, ultra-high temperature, short circuit to the power supply line, and water flow protection.
• 5.【ST Series Pool Heaters】 special used for small pool less than 7CBM,Less Than 2000 Gallon massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating.This product adopts latest constant temperature controller- -temperature sensor replaces traditional magnetic flow switch,it improves greatly of trouble free in working time, adaptability of water environment and stability.

User questions & answers

Question:	Will it work and last with salt water pools
Answer:	I bought four of those speakers and they were sold a single I really like them they sound real good I have a 3000 watt receiver that I crank up and they have a very clean sound don't really need a subwoofer they have plenty of Base but I also purchased a subwoofer
Question:	This has its own pump correct? Are the fittings (Water In and out) standard? 1", 1-1/2" male npt
Answer:	Yes of course, contact customer service for Polk Audio 410-358-3600. Keep the faith!
Question:	Can it be used for an above ground pool about 1800 gallons
Answer:	38 hz to 2400 Hz
Question:	Does it have a built in pump
Answer:	Easy connection : using banana plugs ( you have to buy separate) or use bare cables to “spring” connectors , depends what receiver you have , I always recommend good amplifier even the vintage one with good power wattage out for this quality speakers. I am using Tube pure Amplifier from MP company and is produce great sound

Product description

If you are tired of a cold swimming pool, then this solar heater is for you. our solar swimming pool heater is designed to heat pool in a green and saving energy way, Add weeks to your swimming season & swim in a warmer pool during the season. Solar energy is magnified like the green house effect through the clear lens of the heater and captured by black coiled hoses that carry pool water. The solar heated pool water is circulated back to your pool by your own pump & filter system. Do not hesitate to buy one!



Specifications

color: black

material: PP, PC and PE hose

product size: 22.5"x22.5"x8.5"(LXWXH)

product weight: 11.2lbs

length of long hose: 38.6"

length of short hose: 14.5"

package include: 1 x Solar Dome Swimming Pool Water Heater

• ☀️ Heat your pool in the environmentally friendly way, No electricity or gas connections
• ☀️ Extend your swimming season with warm water and heat your pool to a warm, comfortable temperature
• ☀️ Space saving and aesthetically pleasing when compared to solar panels
• ☀️ A protective cover is included to protect the dome when not in use
• ☀️ Solar powered swimming pool heater, Connects to 1.5 inch hoses

User questions & answers

Question:	Can you provide a link to the manual so we can download it in advance of the product arrival so that we can prepare the connecting hoses
Answer:	I do not have the manuals but here is the answer to connecting the hoses. The connection is for 1 1/2 hoses. Do NOT use the hoses that come with the dome no matter what.
Question:	Can you connect to and above ground intel pool with a sand filter
Answer:	Yes
Question:	Can these be installed on a garage roof, above the water level
Answer:	The hoses that come with it aren't long enough, and your filter pump probably isn't strong enough to pump the water up to roof level. IIRC, it does recommend not putting it higher than the water level.
Question:	Will this work with a Coleman above ground pool or do I need to get adapters to make I think work
Answer:	I went to 2 pool stores and 2 home improvement stores and none of the could sell me anything that would fit.

Product description

Compact, lightweight 20,000 BTU/hr Heat pump for Small pools and Spas. Above Ground pools up to 18' Round. Spas-any size. 120 volts-60HZ USA voltage Heat and cool modes. Highest efficiency in the industry 4.81 COP. Union connectors and hose adapters are included for 1 1/2" pvc plumbing, and hoses. Foot print: 36" x16", weighs 100lbs

• 120 Volt, 60Hz, 10A draw
• Built in 8 foot long power cable with standard USA plug
• Suitable for pools up to 7500 gallons in coastal climates
• Plug into an GFCI protected outlet

User questions & answers

Question:	Do you think this heater working together with a solar set up would be enough for a 21 ft above ground? I don't want to run a 220v line
Answer:	We have a 24 x 52 above ground pool and the 110v keeps our pool in Seattle area at a cozy 84. Adding a solar set up would make it even better, but it just may be extra work that is not necessary. We would rate this heater a 10 if we could.
Question:	Is this enough for 3000 galloons pool in syracuse area ( north ny) or should go with larger btu
Answer:	Yes it will be more than fine I live in buffalo and have a 10,000 gallon pool in 3 days went from 61 degrees to 83degrees
Question:	What is the best time of day to run this heat pump
Answer:	WE have a 18ft above ground pool. We run the filter pump and the heat pump syster 24/7. I keeps the water at about 92-94 degrees all the time. Cost to run is about $25 per month. We are located in central Ohio
Question:	Can this be used for salt water pools
Answer:	Yes, it is completely compliant with Salt water pools

Product features

Sleek Design

Slim profile, weather-proof case is designed to accommodate a variety of placement options. Easy side access to standard fittings minimizes install time and hassle.

Clean, Efficient Electricity

The FibroPool FH120 is powered by clean electricity, reducing the harmful environmental effects of traditional, gas-powered heat pumps. Industry experts have meticulously designed the FH series heat pumps to be the most energy-efficient in their class, operating for an average of ~16 cents per hour.

Extend Your Swimming Season

The FH120 will ensure comfortable swimming conditions down to an outdoor temperature of 40°F, extending your swimming season by months.

Product description

SunHeater-Solar Heating System 2' X 20' S220

• Keep your pool warm with a polypropylene heat collector, solar heater features two threaded-elbow adapters
• Includes, end caps, stainless steel hose clamps, teflon tape, hoses for second collector
• Trilingual installation/operation manual (english/French/Spanish)
• Ordering Guide for Round Pools, 12 to 18 feet: One box, 21 to 24 feet: Two boxes, 27 to 28 feet: Three boxes
• Ordering guide for oval pools, 12 to 24 feet: one box, 15 to 30 or 16 to 25 feet: two boxes, 16 to 32 or 18 to 34 feet: three boxes

User questions & answers

Question:	Do these really warm the water
Answer:	It definitely works. Make sure it is in the sunlight for a minimum of 4 hours (depending on your preference in water temp). I also use a solar blanket. It is pretty awesome and I am purchasing another for my approx 5000 gallon pool (12X24X48) just because I like my water a bit warmer than others, after being spoiled while on vacation last year by a heated pool in 100 degree weather - never thought I would want that warm of water during hot weather but found I do, and I really want to extend my season. I turn my pump on around 11 and leave it on until 4 with direct sunlight at those times.
Question:	we have a 14.000 gallon above ground pool. live in Riverside CA Inland Empire. I assume high heat purchasing one set of 2X20 h20 temp comfortable
Answer:	I use two panels an find the pool quite comfortable. I live in a hot area in NorCal. I find that using a solar blanket helps quite a bit not only in preserving the heat at night but greatly increasing the heat buildup during the day. I highly recommend using both the blanket and the panel.
Question:	I could lean this up against a fence in the sun but it's about 80' away. Can I use garden hoses to send water that far and back
Answer:	it is 80' in total or 160' round trip? what brand and model of pool pump to you have? this is not intended to be used with a garden hose.
Question:	How many hours a day do you have to run it to heat up the pool at least 10 degrees? I have an indoor, in-ground pool
Answer:	Wow, that's an unanswerable question, unless you can run a computer model with all the input variables specific to your installation. The variables include your latitude, hours per day of clear sunshine, running hours, heat loss rate from your pool, size and efficiency of your solar collectors, etc...The bottom line is that you run the collectors as much as possible (dictated by your solar controller), and accept whatever it supplies. If you need a specific water temperature, you use a backup heater (natural gas or heat pump - not propane or electric resistance!).

Product features

When it Comes to Solar, Size Matters

Don’t be Fooled by the Exaggerated Heating Claims Made by the Manufacturers of Mini Solar Systems. They are not true. Those Products do not work. Size and Material do Matter. SunHeater has Real Proven Systems to effectively heat any above ground or inground Pool.

SunHeater Solar Heating Systems are Made in the USA

SunHeater is made right here in the USA out of durable polypropylene. Beware of inferior offshore polyethylene systems.

Get Free Heat From the Sun

Your pool's existing pump allows the pool water to flow through the individual tubes of the SunHeater solar panel(s), where it is heated by the sun and returned to the pool.

Product description

The SunHeater Solar Pool Heater System allows you to capture free heat from the sun’s rays to raise your pool’s temperature. It’s an efficient and cost-effective method to heat your pool that can be used with or in place of your current heater to reduce your pool heating bill. This effective solar powered pool heater utilizes your existing filtration system to push the water through the panel’s many tubes, where it’s warmed by the sun and then returned to the pool. This system can raise the water temperature 6-10 degrees F and extend your pool season by weeks! SunHeater includes a system kit with flex hose adapters for easy poolside installation. It is a universal system that can be used for inground or aboveground pools that are up to 31’ round or 18’ x 36’. Made of durable polypropylene, you can trust this heater to continue working, season after season. SunHeater Solar Pool Heating System will pay for itself in just a season or two and will keep you and your family enjoying your pool for longer. Multiple SunHeater systems can be connected together to produce more heat in less time.

• SOLAR POOL HEATER – The SunHeater Solar Pool Heating System allows you to capture free heat from the sun’s rays to effectively raise your pool water temperature. It’s an efficient and cost-effective method to heat your pool.
• EXTENDS POOL SEASON – Your pool’s pump pushes the water through the panel’s many tubes where it’s warmed by the sun and then returned into the pool. This system can raise the water temperature 6-10 degrees F and extend your pool season by weeks!
• EASY TO INSTALL – This pool solar heater uses your existing filtration system and has 4 end caps, 2 elbows for flex hose connection, 6 stainless steel hose clamps, 1 roll of Teflon tape, and rubber connector hoses.
• TUBE ON WEB DESIGN – The tube-web-tube design allows the SunHeater to capture the most sun possible, maximizing square footage. It offers rigid flexibility, allowing panels to expand and contract with changing temps, giving it the strength needed to last.
• DIMENSIONS – The SunHeater Solar Pool Heater includes two 2’ x 20’ panels, made of durable polypropylene. It’s a universal system that works for pools up to 31’ round or 18’ x 36’.

User questions & answers

Question:	Can I use a submersible pump that generate 10 psi at the solar panel's inlet? 1.5 HP sounds like an overkill and involves high energy to run
Answer:	Given that our pump shows a bit more than 10 psi (four panels, connected in paralell) I can't see why 10 at the inlet won't work. I found these panels worked more efficiently (much higher flow) plumbing two intakes at one end, and one return at the other. There is more pipe involved, but i was able to use my existing Intex pool pump with about 18ft of head on the system.
Question:	I have a 14' x 40' inground pool; would everyone recommend that I buy two of these to go along the entire length of the pool, would one be okay
Answer:	Unless your pool is only 2 feet deep, you definitely need at least 2 panels. I have a 14' x 30' pool and 2 is the correct number for sufficient heating in TX. Rule of thumb, 1 panel for every 5000 gallons of pool. Also, you don't need to run them the length of the pool end to end. I have mine side by side up on top of the roof of my pergola. That way they don't take up as much room. I've also installed them side by side up on the house roof.
Question:	Is this one 4x20 piece or two seperate 2x10 pieces
Answer:	A 4x20 package is two 2x20 panels with a short section of hose to connect them together.
Question:	Are you able to curve it around a pool or must it be straight out
Answer:	The panels actually come rolled up so curving them should not be a problem.

Product description

A Sun Heater solar heating system is the , cost effective way to warm your pool. Capture free heat from the sun's rays to raise your water temperature 6-10 degrees F! Can add weeks to you pool season. Universal system is suitable for both in ground or above ground pools.

MADE IN USA

• Simple DIY installation; for in ground or above ground pools
• Installs on roof, rack, ground or fence
• Patented web design for maximum exposure to sun's rays
• Uses existing pool pump
• Raises pool water temperature 6-10 degrees F
• Power Source Type: Manual
• MADE IN USA

User questions & answers

Question:	What size are the hose connections
Answer:	It can hook up to 1.25 intex or 1.5 hose. You need gaskets though.
Question:	How would this work for heating my 40 gal hot water heater
Answer:	I'm presently heating 60 gallons. Keep in mind it only heats as long as is on the unit. You will need a pump to circulate the water and dual shut off valves to isolate the water while it is heating. I heat a jacuzzi with mine and in the peak of summer I got over 120° incoming water. Good luck.
Question:	Can you connect several of them together easily
Answer:	Yes, it has a connection hose and clamps with each one to tie one, two or more together. Hint: make sure you silicone the caps and threaded fittings. I did even with the Teflon Tape to insure no leaks. Work great.
Question:	Doe it work with a sand filter
Answer:	Yes it works with a sand filter. It also works with salt water systems. I installed mine downstream from the filter on the inlet line to the pool and before the chlorine generator. I would not install it upstream from the pump and filter because you don't want any debris that gets past the skimmer to get into the heater to potentially cause blockages. It doesn't have to be before the chlorine generator either, that's just how mine worked out.
Question:	What is included
Answer:	Included are mounts for concrete (looks difficult) and mount for ladder, that was a snap. Almost returned, test button not too loud, but my wife set it off packaging it, service level is adequate for alarm. Not insane, but you can hear it inside.
Question:	do you think it is sensitive enough for a 15 pound dog? Also, do you think it would work with the pool thermal blanket on
Answer:	As to the 15 pound dog, yes if properly set and tested. The sensitivity changes according to how high or low from the water surface the sensor is. As to a thermal blanket, I have no idea.
Question:	Can this be used in an above ground pool
Answer:	Don't see why not, it attached to our ladder to our inground pool but should work for you as long as you have something similar to attach it to.
Question:	does this unit require additional hardware etc for this unit to work or is it all included? also what type of electricity is required to the unit
Answer:	It's battery powered and it comes with all hardware. It screws to the pool deck, in my case I had to have a masonry drill bit
Question:	Can this detect motion from a dog that weighs 10 pounds
Answer:	Depends on how close to the alarm set dog falls in, if it doesn’t cause a wave enough to move the floating cone then it won’t sound the alarm
Question:	How come this doesn’t work in polls below the ground
Answer:	It just doesn’t work. Don’t buy us unless you have an Indoor pool because a slight breeze will sound the alarm
Question:	Not to many details provided on amazon...is this alarm simple to turn off when maintaining/ cleaning pool? Also, any indication when battery is dead
Answer:	No
Question:	is there an alarm that hooks to ladder
Answer:	No
Question:	Does this work with an above-ground pool liner? Would the alarm go off at any movement of the liner
Answer:	Ours is in an above-ground pool. You have to place it so it’s not in line with the filter output. It works well.
Question:	Can this be used in in ground pools
Answer:	No this is designed for above ground pools only. Try the Pooleye PE23
Question:	Will this alert you to a 6 pound dog falling in
Answer:	Sadly I doubt it would- I believe it had to be like 19-25 pounds to sound the alarm. Can you install a gate? This is scary for you… I wish Good luck with your dog!!
Question:	How does it connect to the alarm in the house
Answer:	It connects through wifi to another transmitter you charge in house. It's really loud regardless. You won't miss the alarm.
Question:	does it have to be tethered ,or can it float free
Answer:	it comes with a long tether that can be easily shortened without cutting it, but you could let it float around without it. If it is free floating be sure it is alarming properly. Its alarm sensitivity is also very adjustable. Note: rain will also likely set it off.
Question:	Will it work if a small, 8-pound dog falls in
Answer:	I believe it will work. Our cats, 10# and 11# both fell in and it went off. Also, my husband forgot it was in and just dangled his feet and it went off. We have been really pleased with it.
Question:	What is included
Answer:	Included are mounts for concrete (looks difficult) and mount for ladder, that was a snap. Almost returned, test button not too loud, but my wife set it off packaging it, service level is adequate for alarm. Not insane, but you can hear it inside.
Question:	do you think it is sensitive enough for a 15 pound dog? Also, do you think it would work with the pool thermal blanket on
Answer:	As to the 15 pound dog, yes if properly set and tested. The sensitivity changes according to how high or low from the water surface the sensor is. As to a thermal blanket, I have no idea.
Question:	Can this be used in an above ground pool
Answer:	Don't see why not, it attached to our ladder to our inground pool but should work for you as long as you have something similar to attach it to.
Question:	does this unit require additional hardware etc for this unit to work or is it all included? also what type of electricity is required to the unit
Answer:	It's battery powered and it comes with all hardware. It screws to the pool deck, in my case I had to have a masonry drill bit

Product features

Sensitivity Adustment

Turning the black flotation base clockwise or counterclockwise raises or lowers the sensing ring with respect to the water. stops. Do not force it. This is the most sensitive position and the position that was used to pass ASTM testing. Moving the float from this position will no longer meet ASTM requirements The closer the sensing ring is to the water, the more sensitive the alarm. Turn the black flotation base gently clockwise until it.

Sensitivity Marks

The “Sensitivity Marks” can be used as a general indicator for the sensitivity position. Should the sensitivity need to be adjusted start making adjustments by turning the float only a ¼ turn at a time. Test the alarm after each adjustment. We do not recommend turning the float out more than three full turns.

Alarm Placement for pools 20x40 ft or smaller

One pool alarm can be used for all pool types. This includes aboveground, in-ground, inflatable and soft side pools.

Alarm Placement for pools larger then 20x40 ft

It is recommended that more than one alarm should be used in pools larger than 20x40 ft.

RECEIVER

Your receiver works with the pool alarm allowing you to monitor your pool from within your house. When the floating alarm is activated it sends a signal to activate the receiver.

Transmission Modes

The receiver has two modes of operation: Serial Number mode (SN mode) and ID mode. When the receiver is in SN mode it will accept the transmission of any Pool Patrol transmitter (this is the default setting). The serial number is common to all transmitters. When the receiver is in ID mode it will accept the serial number plus the ID number of the transmission. The ID number is unique to each transmitter.

RECEIVER PLACEMENT

It is best to place the receiver next to a window or wood door adjacent to the pool with-in 200 feet from the transmitter. Do not place the receiver near steel walls, cabinets, on or alongside an electrical appliance, such as a computer, or on a metal surface as this may affect signal reception. The pool alarm will not transmit its signal through the ground.

Product description

Reduce chemical and water evaporation with our 8-mil Solar Blanket for Round Above-Ground Pools. In order to optimize heat retention, this blanket has an opaque, blue color that allows the maximum amount of sunlight to reach the water. This innovative technology can increase your pool’s temperature up to 15 degrees Fahrenheit. Thermal bubbles retain warmth even after the sun is gone, keeping pool water warm through cloudy days and cool nights. Our blankets are UV-protected and are designed to withstand years of direct sunlight. Backed by a 3-Year Warranty, our solar blankets surpass Intex pool covers in durability and performance

• RETAINS HEAT - Insulating thermal cells trap heat and retain warmth on cool cloudy days allowing you to swim in warmer water all summer long
• LONG-LASTING - Created with UV-protected polymer, our solar blankets are resistant to the deterioration caused by chemicals and UV radiation
• EXTENDS THE SEASON - This high-quality 8-mil solar blanket uses passive heating to raise your swimming pool’s temperature by up to 15 degrees Fahrenheit
• REDUCE EVAPORATION: Prevent up to 95% of pool water and chemical evaporation with the use of a solar blanket. This reduction of evaporation is not only environmentally friendly, it will save you time and money, as well
• 3-YEAR WARRANTY - Your product comes with a 3-year manufacturer warranty

User questions & answers

Question:	I have a 16 foot diameter pool. Would the 15 foot cover fit, or can the 18 foot cover be cut to size
Answer:	I have the 18 ft cover and an Intex pool, the cover touches all the sides with a couple of inches left over. I never trimmed mine, as it finds it way down naturally and lays pretty flat. I am not sure if a 15 ft cover would be as generous as this one, if it were, I would say you are probably safe. I have a lot of bunching up in areas that aren't laying flat. Ironically, that is where the water is the warmest. Just know, personally, I think trimming it would be a pain. It is a very large piece of plastic and even standing in the pool, as you cut, you might end up with those little bubble pieces.
Question:	I live in Texas. My issue is not keeping the water warm. This has to do will it help prevent sunlight breakdown of the chlorine
Answer:	This does help. If you have any other questions you can also call 800-950-2210. FamilyPoolFun
Question:	Would anyone suggest getting a bigger one than needed so it hangs over the pool as to keep the pool cleaner
Answer:	No, unless you are the sole cover operator, cover cleaner, cover puter back oner. I have a salt water system and skimmer also run a sweeper once a week. The dirt, grass and salt chips on top of the cover are minimal. I wanted maximum coverage to heat and hold in warmth. Excess air trapped under to escape, not inflate. The surface tension holds the cover firmly on the water even in high winds, you may lose that with extra cover. I think most covers are cut from straight stock and glued, mine was 6" to 12" to large and egg shaped when I received it. They work great.
Question:	i have an 18x42or 48in pool would this cover fit
Answer:	This a solar cover and therefore floats on top of the pool so the depth of the pool doesn't matter. I purchased the 18 foot solar cover for my 15 foot foot round pool so i would have bit of overlay on the edges. I then secure in place with pool sand bags. I purchased a

Product features

Blue Wave 8-mil Solar Blanket for 18-ft Round Above-Ground Pools

Reduce chemical and water evaporation with our 8-mil Solar Blanket for Round Above-Ground Pools. In order to optimize heat retention, this blanket has an opaque, blue color that allows the maximum amount of sunlight to reach the water. This innovative technology can increase your pool’s temperature up to 15 degrees Fahrenheit. Thermal bubbles retain warmth even after the sun is gone, keeping pool water warm through cloudy days and cool nights. Our blankets are UV-protected and are designed to withstand years of direct sunlight.

RETAINS HEAT

Insulating thermal cells trap heat and retain warmth on cool cloudy days allowing you to swim in warmer water all summer long.

LONG-LASTING

Created with UV-protected polymer, our solar blankets are resistant to the deterioration caused by chemicals and UV radiation.

EXTENDS THE SEASON

This high-quality 8-mil solar blanket uses passive heating to raise your swimming pool’s temperature by up to 15 degrees Fahrenheit.

REDUCE EVAPORATION

Prevent up to 95% of pool water and chemical evaporation with the use of a solar blanket. This reduction of evaporation will save you time and money.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with 40 amp double pole breakers connected to sets of #8 awg wire. Plumbing connections are 3/4" NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• The product is highly durable
• The product is easy to use
• Manufactured in China
• Copper and stainless components
• Lifetime warranty for residential use
• Save up to 60% on your water heating costs with the most advanced, self modulating technology available
• Never run out of hot water with an ECOSMART tankless water heater.

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	I noted someone below stating they got the largest one and they can only run one water source at a time. My guess is they installed it wrong by not getting the electric hooked up right, or maybe the unit was just defective, or they live in Alaska. I went under size with an Eco 27 a few years ago because that’s all my electric panel could handle. We have zero issues in the summer. During winter months we can only run one shower at a time and have to slowly fill a tub (maybe 3/4 fill speed). To save as much money as I am on electric bill and have unlimited shower lengths (only 1 person at a time mid-Dec to mid-March) is totally worth it. On here today because I’m thinking of upping my panel size so was thinking of going with a larger one now. Regardless, CCRC’s experience with the largest unit not working is nothing like the experience I’ve had, and again I intentionally undersized mine for the house. The website has a clear chart to explain size you need based on number of water fixtures in your home and ground water temperature.
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	In the lower states it can, but in the northern states, multiple simultaneous users, it will be overloaded. If you can afford a 3,700 square foot home, then you can place a unit in each appropriate demand zone and be very glad you did. I love mine, live in KY, get great supply when the water is above 60 degrees, and then it slows the flow as the temperature drops. I have dishwasher, washing machine, garden tube, 2 showers, 3 sinks and 4 people. It is better than great in the summer, okay spring and fall, and we are conservative in the winter.
Question:	What is the power consumption of this tank-less heater
Answer:	The instantaneous power consumption while the hot water is running is quite high (up to 18kW or 27kW depending on which model you’re looking at on this page). However, when no hot water is being used, the power consumption is 0 (or a minuscule amount to run an LED light or something). The total power consumption over the course of several days or longer should be much lower than a tank heater but the short term power usage while the heater is making hot water will be much higher than a tank heater. It’s just that the unit sits idle most of the time while a tank heater will use power fairly frequently even when no hot water is needed as the water in the tank cools off over time and needs to be re-heater fairly constantly
Question:	remote
Answer:	This unit does not have the ability to have a remote temperature control.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Specification:

Color: Black

Material: Metal

Input voltage:110V

Power:2KW

Frequency: 50/60Hz

Model:H20-Rs1

Features:

Made of metal, durable

Specifically designed for the bathtub &spa tub

The adjustable maximum temperature is 45 ° C, when the temperature exceeds 45 ° C, the thermostat stops working

Simple and practical design

the heater come with 2m power cable.The heater 1.5" outlet , min 0.035MPA pressure. we suggest at least 0.25HP / 170W pump, then can insure it work correctly.

• Incoloy800 steel Thermostat element very safty and long life.very easty to install and replace, no need do inter adjustment.
• Suitable bathtub &spa tub /hot tub 2KW /110V-120V,
• Easy to set your desired termperature within 45 ° C, when temperature up to your setting temperature it will stop automatically. when temperature is dropped down, it will heat up water until your set temperature.
• suitable for bathtub or hot tub with thermo cover, we suggest water capacity not more than 400 US gallon
• with 1.5" outlet , min 0.35MPA pressure,suggest work with at least 0.25HP

User questions & answers

Question:	It's worth for this product a water pum 220 watts
Answer:	Yes it's very loud.
Question:	Has anybody bought this thing? Is it worth it
Answer:	It will connect to anything that has Bluetooth capability
Question:	Mine leaked electricity into the water dont buy they are dangerous
Answer:	If you mean shuffle yes as long as your player csn
Question:	I want to use this on my outdoor spa tub. details and description do not say indoor only, instructions say for indoor use only. can it be used
Answer:	On one charge, I've been able to keep it running for at least 5-6 days

Product features

Enough Water Flow(Check your Pump)

for this heater the important thing need to make sure enough water flow,suggest the pump not less than 200 wat (3600 L/ h), enough flow to turn on

flow switch "TRIPS" and when the flow decreases to NOT enough it shuts the heater down. That way if for some reason the flow is too slow it will not over heat the unit and it will not even work at all till the flows correct.

Correct Installation Direction

Make sure the mount direction is correct, there is a arrow direction shows the water inlet and outlet marked on the heater, wrong direction will not make the heater work.

1.5" Standard Pipe

Standard pipe size 1.5 inch， smaller pipe can not make sure enough flow volume.

Warm Tips 1

Put Hot Water in your Hot Tub,Not Put Cold Water.when temperature up to your setting temperature it will stop automatically. when temperature is dropped down, it will heat up water until your set temperature.

Warm Tip 3

Need Insulation cover to keep whats already been heated,or it will take long time even will not be able to catch up.

Product description

Compact, lightweight 20,000 BTU/hr Heat pump for Small pools and Spas. Above Ground pools up to 18' Round. Spas-any size. 220 volts-60HZ USA voltage Heat and cool modes. Highest efficiency in the industry 4.85 COP in its class. Union connectors and hose adapters are included for 1 1/2" pvc plumbing, 1 1/2" or 1 1/4" hoses. Foot print: 36" x16", weighs 100lbs

• 4.85 COP. Best in its class
• 20,000 Btu/Hr heating capacity
• Suitable for pools up to 7,500 gallons in coastal climates
• Suitable for ALL Hot Tubs
• 240 Volts- 60 HZ American Voltage

User questions & answers

Question:	How difficult is this to install
Answer:	Very simple to get install.
Question:	I just unboxed mine and hooked it up (professional electrician and all). It runs fine, but isn’t producing warm/hot water after several hours. Help
Answer:	Hi, the heat pumps take a while for initial heating. without knowing your pool size, location etc, its difficult to estimate the performance. But please be patient. they work slow, but they work well. Yavuz
Question:	I have 15’ intex pool with 2800 gph intex pump with 1 1/2” connections, and heat pump heated only 1f in 24 hours. do i need a bypass valve
Answer:	No need for a bypass valve. please connect it after the filter, before the salt system ( skimmer- pump- filter- heat pump- salt generator- return to pool) , if you have it. Otherwise, Skimmer- pump- filter- heat pump- return to pool
Question:	Will this unit control the pump too? On off timer
Answer:	This unit will not control them. It will not run unless the pump is running. So in reality the pump controls the heater. By the way the heater is awesome. I live in Albany ny. Pool was in mid 80’s Memorial Day after open 1 week.

Product description

Extend your swimming season by effectively using the sun's energy. Poolmaster's Slim Line Above-Ground Solar Heater can heat your above-ground swimming pool up to 5 degrees warmer in optimal weather and placement conditions. The Solar Heater features adjustable legs for optimal placement and clear plastic cover that aids in retaining the sun's heat. The solar unit itself is sleek and slim in design. Includes easy step-by-step instructions for out-of-the-box use. Set includes solar unit, hose, adjustable telescopic legs, and connection components. Place in an area that gets maximum sun exposure to ensure the fastest rise in temperature. Recommended to be used with a solar cover to help sustain the heated temperature overnight. NOTE: The Slim Line Above-Ground Solar Heater is recommended for use with UP TO a 1hp filter pump. A bypass diverter is recommended for use on filter pumps over 1hp - sold separately.

• Power Source Type: Solar Powered
• Country Of Origin: China
• Model Number: 59026
• Item Package Dimension: 5.01" L x 2.63" W x 2.63" H

User questions & answers

Question:	Is it mountable? Such as on a roof
Answer:	The instructions say "Never place the Solar Heater on a roof or other standing structure"
Question:	What hp pump can i use with this
Answer:	Any size pump should work. May need to acquire hose adapter depending on size oh pump outlet.