13 best swimming pool motors

Product description

The Hayward Super Pump replacement motor is the ideal way to save money and keep your pool pump running. The Hayward replacement motor bolts right on to the existing Super Pump wet end housing, saving you a lot of time and expense from having to buy a completely new pump.The replacement motor is simple to install and wire, and there's no re-plumbing needed. You can wire the motor for 115/230 volts, and the Hayward Super Pump replacement motor comes in 3/4 to 2 horsepower sizes. Direct

• Replacement 1.65 Total Horsepower (THP) swimming pool pump motor
• Standard 56J-Frame, C-Flange motor with threaded shaft
• Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o'clock
• Designed to replace a 1.5-HP Up-Rated or 1-HP Full-Rated motor and compatible with 115/230 volts
• Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy

User questions & answers

Question:	Does this replace a Pentair model
Answer:	No it would not replace that motor. That model of pump would take a Century B2854 motor or the US motor EB854.
Question:	Would it replace a Pentair. Model
Answer:	Probably not, depends on the model. Pentair usually has a “square “ pump flange, this one is for a Hayward pump with a round pump flange. Search for Pentair pump motor and compare bolt configuration. Also, always replace the shaft seal.

• **THIS ITEM IS NOT AVAILABLE FOR SALE IN THE STATE OF CALIFORNIA! **
• If you’re looking for value, Doheny’s Pool Pro pumps offer dependable performance, outstanding results and cost less than big name brands!
• Stainless steel 1.5 HP motor shaft is constructed with a reinforced thermoplastic body for longer life and durability
• Advanced engineering provides high efficiency and minimal noise and meets or exceeds all CSA & ETL requirements
• 1.5 inch internal threading and 2.5 inch external threading and comes with standard three-prong plug connection on a 3 foot cord

User questions & answers

Question:	The fitting facing up next to the motor, can it be rotated so it can go side ways? So looking at your picture it would need to face to the back
Answer:	It's a standard pipe thread, so you can get whatever fittings you like at the nearest hardware store.
Question:	can this pump work for an in-ground pool 20 ft long X 7ft deep
Answer:	You would need the blue line in ground pump Item 50 14 . It will be the best money you ever spend on a pump . We love ours !
Question:	can this pump be left outside uncovered
Answer:	No❗ you should always drain the pump and store it in a dry place so it does not freeze.
Question:	I have a 24 foot round above ground will this work
Answer:	I have a 18 foot round pool and it works very well for me. You may have to run your pool longer to get a good result. I had a Hayward pump that did not work sa well as the Doheny's pump.

Product features

Proven Quality and Reliability

Proven quality and reliability without the name brand cost! Meets or exceeds all CSA and ETL requirements.

Extra Large Basket

Strainer housing with extra large basket for catching leaves and debris.

Easily Replace ANY Existing Pump

Suction (front) and discharge (top) ports feature 1.5 in female threads and 2.5 in external threading making it a snap to replace ANY existing brand pump.

Clear Lid Makes Routine Checks Simple

Basket covered by a clear lid that lets you see exactly when cleaning is necessary.

6 ft Power Cord

115V. 6 ft cord with standard 3-prong cord connector.

Easy To Remove Transparent Skimmer Lid

Transparent skimmer lid is easy to remove. Just twist to unlock and then twist again to lock the cap.

Product description

Harris ProForce 1.5 HP Above Ground Pool Pumps cost less than big name brands, yet still offer outstanding results and performance. These pumps are made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. The strainer includes a large, easy-to-clean filter basket. The see-through, twist and lock lid allows for quick viewing of the strainer. Meets or exceeds all CSA and ETL requirements. Pumps are not to be used with storable pools. The ProForce 1.5 HP is 115 Volts, has 1.5 inch connection sizes on both suction and discharge ports, 1.5 inch internal threading, 2.5 inch external threading, has a convenient drain plug and comes with standard three-prong plug connection on a 3 foot cord. Pump dimensions: 21 inches Length by 11 inches Height by 9 inches Width, 6.5 inches from Floor to Suction Port, and 7.75 inches from Floor to Discharge Hose.

• **THIS ITEM IS NOT AVAILABLE FOR SALE IN THE STATE OF CALIFORNIA! **
• Stainless steel 1.5 HP motor shaft is constructed with a reinforced thermoplastic body for longer life and durability
• Advanced engineering provides high efficiency and minimal noise
• Meets or exceeds all CSA and ETL requirements
• 115 volts. 1.5 inch internal threading and 2.5 inch external threading and comes with standard three-prong plug connection on a 3 foot cord.

User questions & answers

Question:	What’s the water gallon capacity for this pump
Answer:	Not sure but my last pump was a Hayward and I wish I would’ve spent the extra money to buy a Hayward!!!This one doesn’t seem as strong.
Question:	Para un pool de 35ft por 15 ft de ancho que pompa nesecito
Answer:	my pool is 24ft x 52Inch
Question:	I have a 24 above ground need new pump i have a waterway pump now what is compatible
Answer:	Yes mine is also 24 ft and does an amazing job !
Question:	Will this pump work for an in ground pool
Answer:	This pump will NOT work for an in ground pool.....

Product description

XtremepowerUS Variable Speed Pump now offers fully variable speed pump at an affordable price. The XtremepowerUS motor delivers premium energy efficiency and program flexibility with a digital controller mounted directly onto the pump. The XtremepowerUS Variable Speed Pump can save you up to 80% in energy costs over single-speed pumps. It also has faster payback than the more expensive variable speed pumps because it is sized to match the performance of the most common medium head pumpsFeatures:Running your pump at lower speeds for longer periods of time will cost you less in operational costs than running your pump at a high speed for shorter periods of timeEasy start up fill pump with water upon first use to prevent motor from overheatingExtra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaningFully programmable, self-contained 24-hour time clock, with custom speeds and timer functions, which allows it to manage flow throughout the dayHigh Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frameThermally protected motor for greater protection and longevityIntended for use with swimming pools, hot tubs, and spas.Specifications:Material: PPGF30 + PCPower: 1.5HPVoltage: 230v# of Speed: 3Rated Power: Eco (1,500RPM), Clean (2,400RPM), Boost (3,250RPM)Timer Function: YesInlet Internal Fitting: 2" NPTHead Max: 59ftGPM: 101Waterproof Level: IPX5Certification: ETLHardware Required: YesPackage Contents:Electric Pool PumpManualWhen installing, please consult qualified professional

• The XtremepowerUS 1.5 HP self-priming pump with digital control interface is constructed to be longer lasting with high durability and corrosion proof polymeric material used as the housing.
• Built-in start functions gives more user control with ECO (default 1500 RPM), CLEAN (default 2400RPM) and BOOST (default 3250 RPM) operation; quick-start button speeds can be further adjusted between 1000 to 3450 RPM.
• The high performance motor with built-in airflow ventilation and thermal overload protection will deliver quieter noise and smoother running experience than traditional pumps of its class.
• LCD screen displays actual wattage consumption and speed settings; self-contained 24-hour time clock, with custom speeds and timer functions, which allows it to manage flow throughout the day
• This pool pump is specially designed for both in-ground and above-ground pools and spas of all types and sizes. The product is UL Certified to meet specific product standards and safety requirements. 2pc-Union Fitting Sold Separately (ASIN: B01FNEYVMU)

User questions & answers

Question:	My pump keeps throwing a 15amp dual breaker. Anyone else have this problem? Is it 2 120 lines in or a single
Answer:	The pump runs on 240 volts, you need a circuit breaker that gives you two 120 volt circuits on different phases so you get a total of 240 volts, and not just 2 - 120 volt lines.
Question:	Does this pump lock out with an error code that needs to be manually rest when there is a disruption in power
Answer:	I don't believe so. But it will require a manual start up or clock set if running in auto program.
Question:	Is this pump for an I ground pool
Answer:	Yes. We have a large 16x30 in ground and it works well.
Question:	Does this pump come with the white fittings pictured
Answer:	No fittings included. We bought some for the install.

Product features

XtremepowerUS In/ Above Ground Pool Pump

The XtremepowerUS self-priming pool pump is constructed with corrosion-proof polymeric material to be longer lasting and highly durable. Built to have a high-performance motor with airflow ventilation for quieter noise and smoother run-time experience.

Compatible with Different Brand or System you have before

The XtremepowerUS pool pump designed compatible for use with solar heating and in-floor cleaning systems and easy setup new build pool system or replace to your pool cleaning system you have before,

Product description

Swimming pool pump motor. Commonly found on inground pool pumps such as Hayward Super Pump, Maxflo, Super II and many other pumps requiring a 56J frame motor. Century motors are found on most swimming pool pumps. Standard 1081 pump duty motor. Stainless steel shaft. Sealed ball bearings. Motor has 4 threaded bolt holes on face for mounting the pump to the motor. Bolt holes are 5 7/8" on center measured across the shaft. Wiring diagram on motor name plate. 1 year warranty. Century Equivalent UST1102

• 1 HP 3450 RPM 56J, 14/7 amps, 115/230V 60hz.
• Automatic Overload Protection - Service Factor 1.0
• Non-Reversible - CCW Rotation facing the shaft
• C-Face Mount, Round Body-no base
• 56-J Frame; 5/8" diameter threaded stainless steel shaft

User questions & answers

Question:	Where is this motor made
Answer:	Not sure but it doesn't matter much, the unit is pretty low quality they only work a hand full of times before they stop pumping if you're lucky and the hose is to short.
Question:	What is your return policy
Answer:	Yes as long as your intake line is down in your container of new oil....
Question:	Is it comparable to a.o smith cat- bn25ss part 7- 186884-20, 1 hp, 115 volt, 12 amp hp 1.0 rpm 3450? i cannot find the same one anywhere
Answer:	Yes!Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment etc
Question:	I purchased this pump less than 1 year ago and it is not working now. Is it still under warranty? TY
Answer:	Do not drain gas from gas tank with this oil change pump! Use electric oil transfer pump extract gas is danger, that will sparks can set your car on fire !

Product description

Make sure your above ground pool is ready for swimmers this season with the **Dynamo Pump** by Pentair. This Dynamo pump offers 1.5 HP of power, and it's made of reinforced fiberglass for strength and durability. The Dynamo Pump has a large capacity basket with a see through lid, a unique diffuser and impeller for great flow rates and easy access drain plugs.

• Easy access discharge port converts between horizontal and vertical for fast, in field service, minimizing labor expense
• Every OptiFlo pump is performance and pressure tested prior to shipment to ensure superior quality.
• 1 Year Manufacturer Warranty

**We are an Authorized Pentair Dealer!**

• NEW PENTAIR Dynamo 1.5" HP Above Ground Pump With Cord
• 1.5 Hp Motor
• One Speed with Cord
• Self priming design ensures long life
• Reinforced fiberglass for strength and durability

User questions & answers

Question:	I got this pump with my above ground pool. Pump works great but the lip that helps lock the lid in place broke. How do I replace that part
Answer:	Local pool supply should have replacement box. Dont leave it on in the winter or this will happen every year.
Question:	I originally bought this model 8 years ago and am looking to replace it, our model outake is 2 1/2 inch this one says 1 1/2 inch. is this true
Answer:	Mine is a 1 1/2 inch so it fits with my intake and outtake pipes. I'm not an expert on all this equipment stuff and asked my pool service store where I buy my products what to use. I don't know if Pentair makes 2 1/2 or not although I would think they would. Sorry, not much help other than the pump size has to fit the pipes going in and out of it. There 'maybe' some converter applications you can buy to reduce sizes, etc., but again, don't know for sure. I would recommend talking with your pool supply sources or contact Pentair directly.
Question:	Can it be used with a salt water pump
Answer:	Yes it can. we have this pump on our 27 round above ground pool.
Question:	How many gallons is this pump recommended for
Answer:	Not 100% sure, we have this setup on our 24 foot round above ground pool. This is an exact replacement to our original one. Same brand, same horsepower.

Product description

MIGHTY MAMMOTH above ground swimming pool pump available in 1.5 HP & 2 HP STRONGER THAN THE COMPETITION to outflow and out-clean other pool pumps REPLACES ALL MAJOR BRANDS to save you money FOR ABOVE GROUND POOLS - ready to connect to your filter system CIRCULATE POOL WATER to keep your pool safe and clean Low Vibration and High Durability Comes with Strainer Basket and 2 - 1 1/2" fittings. Without proper water circulation, your swimming pool water will not be as clean or fresh as it should be. The Mighty Mammoth above ground swimming pool pump by Quality Pool Products will outflow and out-clean other competing pool pumps. This pool pump works hard to keep your above ground swimming pool clean, clear and free of debris. The motor has a heavy-duty drive shaft. It features superior construction with a corrosion proof housing for the filter portion. 1.5 HP Specifications - Voltage 110/120V, 1100W; 2HP Specifications - Voltage 110/120V, 1500W. STRONGER THAN THE REST & PRICING's the BEST.

• Superior Pool Pump for In Ground Pools
• Replaces All Major Brands
• High Flow Rate - Great Performance
• 2 HP, 1500W
• 110/120V, 60HZ

User questions & answers

Question:	What is the rpm of this product
Answer:	3450
Question:	The output valve on my particular pool pump is on the side of the unit. Can this pump be modified for side output
Answer:	No it cannot sorry.
Question:	Can this pump get wet
Answer:	I have a cover protecting the pump from water splashed from pool...it has gotten wet and did just fine but I dont know how good it would be constantly.
Question:	do you have a 1.5 hp above ground pool pump with on/off switch and 6 ft cord
Answer:	They have one but the one I brought does not have one.

Product description

This high performance 1.5 hp - 115/230 volt, in-ground pool pump is quiet, efficient and self priming. Its corrosion proof polymer construction will deliver years of reliable service. It is the same quality construction as Hayward, Sta-Rite and Pentair. This pump comes ready for a hardwired 230 volt connection and is convertible to a hardwired 115 volt connection.

The suction and discharge ports are threaded for 1 1/2" fittings and provide excellent water flow to keep your pool water crystal clear. The transparent Twist-Lock lid and large comfortable handle allows for quick inspection of strainer. The strainer includes a large, easy to clean basket. The pump comes with 1.5" Union Fittings and has a convenient drain plug for easy winter maintenance.

This pump comes ready for a hardwired 230 volt connection and is convertible to 115 volt connection. It is designed and manufactured to meet all CSA and ETL requirements. The pump motor is equipped with automatic thermal overload protection, which allows the pump to automatically shut off under abnormal overheating before damage to motor occurs. The Pump will auto-restart when the motor temperature goes down.

ITEM SPECIFICATIONS:

Type: Electric Pool Filtration Pump

Material: PPGF30, PC+SS

Power: 1.5HP - Single Phase - 230V - 60 HZ - 7 A / 115V - 60 HZ - 3.5A

Power Cord: No

Number of Speeds: single

Flow: 88 GPM

Head: 65 Ft

RPM: 3450

Max Flow: 5280 GPH

Max Water Temp/Pressure.: 40 PSI @104F

Inlet/Outlet Fitting: 1.5" NPT

Waterproof Level: IPX5

Certification: CSA and ETL





PACKAGE CONTENTS:

Electric Pool Pump & Pump Frame

Pump Cover with "O" Ring

Pump Filter Basket

Owners Manual

When installing, please consult a qualified professional!



Intended for use with swimming pools, hot tubs, and spas!

**Not for sale in California.**

• GREAT VALUE: This 230/115 volt - 1.5HP Pool Pump Delivering Superior Reliability and Performance, at much Less Cost than the Big Name Brands. An efficient and affordable pool Pump that you can rely on
• SELF-PRIMING: A Powerful Self-priming Pool Pump, heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Suction Lift to 8 Above Water Level
• LONG-LASTING: Durable Rigid Construction, a Stainless Steel Motor Shaft & a Corrosion proof polymer reinforced thermoplastic body for high strength, will give you years of use
• LOW MAINTENANCE: The Clear Acrylic Twist-Lock Cover allows you to see exactly what is in the Large Basket, which reduces your pool maintenance time and increases your pool enjoyment
• ELECTRICAL: 1.5 HP - 230 V - 7 A or 115V - 15A - 88 GPM - H 65 Ft - - Requires to be Hardwired

User questions & answers

Question:	Where to get replacement o rings for cover
Answer:	You won't have to worry about replacing the O rings, pump won't last that long.
Question:	What is the GPH flow rate
Answer:	88 gpm per manufacturer.
Question:	Is this a one or two speed pump
Answer:	One speed.
Question:	What is the warranty on this pool pump
Answer:	Sorry I don’t know that but I can tell you my pool have never been this clear in 25 years!

Product description

Pool motor, 50-Degree C ambient temperature, 303 stainless steel threaded shaft.

From the Manufacturer

The A.O. Smith one horsepower square flange up-rated replacement motor for swimming pool pumps has a threaded shaft and fits most pumps that require a square flange motor. It operates on both 115 and 230-Volts. The USQ1102 is compatible with Sta-Rite Dura-Glas, Dura-Glas II, Max-E-Glas, Max-E-Glas II, Dyna-Glas, and Max-E-Pro pumps, Hayward Max-Flow II pumps, and Pentair Whisper-Flo, Challenger, and Ultra-Flow pumps.

• 1 HP
• 3450 RPM
• 115/230 volts

User questions & answers

Question:	can this item be sold in Florida
Answer:	Check the frame size and voltage
Question:	What is the distance from the face of the flange to the back? I have 13" clearance only and I want to know if it fits
Answer:	I bought a USQ1202 for a pool pump, it is a 2 hp.
Question:	This is for my pool and I am replacing current motor with exact same. Does this come with all the o rings etc needed
Answer:	I believe all the square mounts are interchangeable.
Question:	Good reviews ... does this come prewired for 230V or 115V
Answer:	Check the bolt pattern that it matches the pump unit. If the old unit has the same HP and revolution rate you should be in good shape. Remember to replace the seal with a new one also available on Amazon. Remember the threads are reversed. I used the Century to replace an A.O. Smith k48m2pa104a3. Good Luck.

• [MAIN PARAMETER] ~ Model: SPP250E; Power: 1850W/2. 5HP; Voltage: 110V/60Hz; Max. Flow: 448L/m; IP55 INS CL. F: Max. 50 C; Amps: 16; Head: Max 69ft; Capacitor: 25F; Noise Level: <65dB.
• [CONNECTION SIZE] ~ Inlet: 1. 57 inch internal and 2 inch external; Outlet: 1. 57 inch internal and 2 inch external; Pipe Compatibility: Fit 1. 57 inch plumbing internally and 2 inch plumbing externally.
• [Large flow] swimming pool pump have advanced s-tek flow system for increased efficiency with continuous flow Rate of 448L/min.
• [Thermal overload protection] This pump have a removable strainer basket with a built-in thermal overload protection - as the water circulate and passes through the filter.
• [Application Scope] pool pump suitable for pools up to 80, 000 litters, ideal for residential and commercial swimming pools and spa's.
• Note: the swimming pump comes with metric fittings, need to use hose fitting!

User questions & answers

Question:	Can I take the filter out of this and use it with my sand filter
Answer:	You can Use this pump with a sand filter. But, you leave the strainer inside to keep trash out of the pump. You remove nothing from this pump
Question:	What is the gph on this pump
Answer:	8880gph
Question:	Does this pump have a stainless steel shaft
Answer:	It’s an inexpensive product
Question:	How many gpm will I lose if my intake hose is 1 1/2” and my outlet is the same
Answer:	None

Product features

CONNECTION SIZE

• Inlet: 1.57 inch internal and 2 inch external.
• Outlet: 1.57 inch internal and 2 inch external.
• Pipe Compatibility: Fit 1.57 inch plumbing internally and 2 inch plumbing externally.
• NOTE: The swimming pump comes with metric fittings, need to use hose fitting!

EASILY FILTER

• Large see-through strainer cover and super-size filter basket.
• As the water circulates and passes through the filter, it leaves your pool squeaky clean, free from leaves, hair strands, debris and other impurities.
• The clever design makes the filter cover easy to remove - no tools, no loose parts, no fixtures.

HIGH-QUALITY MOTOR

• The motor is mechanically sealed. During long-term operation, the sealing state is stable, which can effectively prevent the leakage of the motor.
• The pump has built-in thermal overload protection. When the pump load is overheated, the thermal overload protector will automatically power off, and the pump will stop running to prevent the motor from overheating and damage.

ULTRA-QUIET OPERATION

• The cooling fan can effectively dissipate the motor and prolong the use time, so that the pump can run at high temperatures.
• The unique design effectively reduces the noise generated when the pump works, creating a pleasant and comfortable environment.

Specification

Model: SPP250E

Power: 1850W / 2.5HP

Voltage: 110V / 60Hz

Max.Flow: 148 GPM (560 L/MIN)

Waterproof Level: IP55

INS CL.F: Max.50 C

Amps: 16 Amps

Head: Max 69ft

Capacitor: 25F

Noise Level: <65dB.

Product description

Keep your pool water Krystal Clear and refreshing this summer with the Intex 2,500 GPH Filter Cartridge Pump! Boasting a pump flow rate of 2,500 gallons per hour and a system flow rate of 1,900 gallons per hour, this pump will circulate and filter the water in your above ground pool to keep everything clean, refreshing, and fun. In addition, the maintenance for this pump is a breeze: just the occasional cartridge rinse or swap to keep this pump running strong. It uses Type B filter cartridges (Item #29005E) which should be changed every couple of weeks. This 2,500 GPH filter pump is the most powerful cartridge filter pump made by Intex, and is a must have for any above ground pool up to 24 feet in diameter, see for yourself! It can be used with any Intex above ground pools and features a built-in timer to set operating times for the ultimate in convenience.

• Easy to use - simply replace the old cartridge with a new one every two weeks
• Double insulated pump
• Air release valve for air trapped inside filter chamber
• Sediment flush falve at bottom of filter chamber. Minimum pool size (water capacity)- 4,000 gal (15.1m3). Maximum pool size (water capacity)- 15,200 gal (57.5m3)
• Works with 15-feet Easy Set, 15-feet Metal Frame, or 18-feet by 10-feet Oval Frame pools

User questions & answers

Question:	will this fit a summer escape pool that has the filter /skimmer built on side of pool if i remove the skimmer it will leave a approx 6 inch hole
Answer:	DO NOT REMOVE FILTER FROM THE SIDE OR CUT HOLES IN POOL!!!! This Pump is compatible with both Summer Escapes and Summer Waves Pools that has the filter on the side and everything you need is sold right here on amazon.com This is what you need to convert this pump to Summer Escapes Pools https://www.amazon.com/gp/aw/d/B01HU9K5O4/ref=gwm_tlc_pi?pf_rd_p=62af779f-88df-4dd0-be50-91c6a4b9661a&pf_rd_s=grid-6&pf_rd_t=Gateway&pf_rd_i=mobile&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=WVZ8AYKA513KSR3XMW5F&pf_rd_r=WVZ8AYKA513KSR3XMW5F&pf_rd_p=62af779f-88df-4dd0-be50-91c6a4b9661a AND ALSO https://www.amazon.com/gp/aw/d/B0149KIXRI/ref=gwm_tlc_pi?pf_rd_p=62af779f-88df-4dd0-be50-91c6a4b9661a&pf_rd_s=grid-6&pf_rd_t=Gateway&pf_rd_i=mobile&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=WVZ8AYKA513KSR3XMW5F&pf_rd_r=WVZ8AYKA513KSR3XMW5F&pf_rd_p=62af779f-88df-4dd0-be50-91c6a4b9661a THIS IS WHAT YOU NEED TO CONVERT PUMP TO SUMMER WAVES POOLS. https://www.amazon.com/gp/aw/d/B0149KIXRI/ref=gwm_tlc_pi?pf_rd_p=62af779f-88df-4dd0-be50-91c6a4b9661a&pf_rd_s=grid-6&pf_rd_t=Gateway&pf_rd_i=mobile&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=WVZ8AYKA513KSR3XMW5F&pf_rd_r=WVZ8AYKA513KSR3XMW5F&pf_rd_p=62af779f-88df-4dd0-be50-91c6a4b9661a
Question:	I have a 12'x30" pool just hooked it up had great flow for about 30 minutes now it runs much slower! What do I need to do
Answer:	Sorry, I just noticed that you said you just hooked it up and ran it for 30 minutes, so there probably isn't debris build-up yet. Sounds like air in the pump.
Question:	Just got my pump yesterday. The pump is on and running, but will not take water in or push water out. Any ideas. I've tried everything
Answer:	We are having the same issue -worked great for one day now won’t pull water through even though water completely fills the pump Have tried everything -even changed the filter- Help!!
Question:	Did this come with the hoses and plunger valves or are those separate
Answer:	Just arrived. Includes pump, two hoses and directional inlet. NO outlet fittings and NO plunger valves. In addition, for anyone making a "hillbilly pool" with a stock tank, this cannot pull water over the top. The best I can see, holes will need to be cut in the side so water can flow down into the pump.
Question:	I'm having problem getting the lid off and suggestion? I would greatly appreciated
Answer:	Yes, the lid can be hard to get off of the pump. What I use to make it easier is "O-Ring Lube", available at pool supply stores. Apply a thin coating to all mating surfaces and the O-ring seal. One other item I use is a strainer basket in the pool surface strainer, it catches most the leaves, so cleaning the basket on the pump doesn't have to be that often. Hope it helps you.
Question:	How can I get an extended warranty beyond 1 year for this item? My last one didn't even last 2 years! Thanks
Answer:	I don’t think you can. It’s a factory warranty and if you install it I have read that the factory warranty isn’t honored when I read other customers responses. If it’s installed by a pool company it’s honored.
Question:	Does this work well with a sand filter
Answer:	It works great with a sand filter
Question:	How can I change it from 230 volts to
Answer:	inside the rear cover there is a diagrahm of how to hook up to 115 volt and another diagrahm on how to connect to 230 volt....

Product features

Efficient, Quiet, Rugged And Versatile

The SuperFlo pump is a product of more than 40 years of innovative hydraulic engineering. The result is an ability to move more water, more efficiently, for lower operating cost and super-quiet operation. Plus, by performing with less effort, there’s simply less wear and tear—and that means longer life for a higher return on your pump investment.

The Strong Silent Type

The SuperFlo pump meets all the criteria for a superior pool, spa or water feature pump. It’s super energy efficient, super quiet and super easy to maintain. Plus, it’s designed with innovative materials that will stand up to the most demanding installations and conditions. Whether you’re choosing your first pump or replacing older technology, the SuperFlo pump is definitely a super choice.

The SuperFlo High Performance Pumps are specifically designed to be the best choice for a variety of inground pools. SuperFlo features thick walled body parts, a heavy-duty motor and highly engineered hydraulics. SuperFlo's silent running capability and small footprint allow it to easily drop into a compact equipment pad.

*Hayward and Super Pump are registered trademarks of Hayward Industries, Inc.

Intex Filter Cartridge Pump

Keep your pool water Krystal Clear and refreshing this summer with the Intex 2,500 GPH Filter Cartridge Pump.

Product description

Common applications are: pool and spa pumps, -Inch1081-Inch low service factor.

• B2854 replaces old Century stock, B854
• 1-1/2 HP
• 230/115 volts
• 3450 RPM
• 1-1/2 HP
• 3450 RPM
• 230/115 volts

User questions & answers

Question:	will the A. O. Smith B2854 1 1/2 HP replace the Emerson
Answer:	Brand new with 1 yr warranty the last one, same brand model etc lasted for 6 years running 8hrs a day for 5 years and the last 8 months 16 hrs a day maybe 24 in summer cuz of pool issues
Question:	where are the A O SMITH motors made
Answer:	It is itself a smart switch. No need for smart bulbs. But i would guess it would still work.
Question:	Will this replace centurian pak fab part: 8-168453-24, pr: y56y, type: cx, form: kjm, hp: 1.5 3450rpm
Answer:	I can't. if you find out please let me know. Only draw back to this plug
Question:	Is this a rebuilt motor, or brand new? How much warranty does the seller and/or the manufacturer provide
Answer:	This model is made for dry locations. We do not recommend using outdoors.

• EFFICIENT: Combines the functions of a skimmer and filter pump and keeps pool water clear and clean in one unit
• MAINTENANCE & SAFETY: Attaches to sidewalls of pool for easy maintenance and to prevent tripping. Also features GFCI safety feature
• EASY TO CLEAN: Sifts out dirt and debris with your pump and is easy to clean for multiple uses
• FITMENT: Circle fitting and does not include square retrofit kit. Fits most above ground pools
• SPECIFICATIONS: 1,500 gallon per hour | 180 Watts | 3.1 Amps

User questions & answers

Question:	Nesesito un filtro para este tipo de pompa de 600 galones
Answer:	Hi, We are the manufacturer of Clorox Pool&Spa products. Being 99% Dichlor, the Small Pool Chlorinating Sanitizer is a formulation that is commonly used in spas, including salt water systems. If you have any other questions or concerns, please give us a call at 1-800-SOS-POOL.
Question:	Is there a power switch
Answer:	Hi, We are the manufacturer of Clorox Pool&Spa products. That pool comes out to about 4,000 gallons. Each 1inch tablet treats about 1,000 gallons, so you'll need 4-5 in a floater. If you have any other questions or concerns, please give us a call at 1-800-SOS-POOL.
Question:	I have a 10 foot round pool. The 330 gallon does not do enough to clean pool. Will this work in it's place
Answer:	Hi Dominic, We are the manufacturer of Clorox Pool and Spa products. The active ingredient is trichlor. If you have any other questions or concerns, please give us a call at 1-800-SOS-POOL.
Question:	What is the hp of this product
Answer:	Hi, We are the manufacturer of Clorox Pool and Spa products. Broadcasting the shock around the pool is the best way to apply the product. If you have any other questions or concerns, please give us a call at 1-800-SOS-POOL.