13 best sand filters
Sand filters are commonly used in swimming pool filtration systems to remove impurities and debris from the water. These filters are a critical component of pool maintenance and help keep the water clean and safe for swimmers.Here's what you need to know about sand filters:
Filter Media: Sand filters use a special type of filter media, typically graded pool filter sand, to trap and remove particles and contaminants from the pool water. The sand is housed in a large tank.
Filtration Process: The filtration process begins when pool water is pumped into the sand filter tank. The water flows through the sand bed, and as it passes through, particles and debris are trapped in the sand grains.
Multi-Port Valve: Sand filters are equipped with a multi-port valve that allows for various functions, such as filtering, backwashing, rinsing, recirculating, and closing the system. Each function serves a specific purpose in the filtration and cleaning process.
Backwashing: Over time, the sand in the filter can become clogged with trapped debris. To clean the filter and restore its efficiency, a backwashing process is initiated. During backwashing, the flow of water is reversed, flushing out the trapped particles and debris from the filter bed and sending them to waste.
Rinsing: After backwashing, the filter is rinsed to ensure that any remaining debris is removed from the filter tank and not returned to the pool.
Water Clarity: Sand filters are effective at removing both small and large particles from pool water, helping to maintain water clarity and hygiene. They are especially good at trapping fine particles.
Maintenance: Regular maintenance is essential for sand filters. This includes monitoring the pressure gauge on the filter and initiating backwashing when the pressure rises, indicating a clogged filter. Additionally, the sand may need to be replaced periodically, typically every five to seven years, depending on usage.
Chemical Balance: Proper water chemistry is crucial in conjunction with sand filtration to maintain a clean and safe pool. Regularly testing and balancing the pool's pH, chlorine levels, and other chemical parameters is essential.
Size and Capacity: The size and capacity of a sand filter should be appropriate for the volume of water in your pool. Larger pools may require larger filters to ensure effective filtration.
Environmentally Friendly: Sand filters are considered environmentally friendly because they don't require the use of disposable filter cartridges, which can add to waste. Instead, the sand can be reused for several years before replacement is necessary.
Sand filters are a popular choice for pool owners due to their efficiency and relatively low maintenance requirements. However, it's important to follow the manufacturer's guidelines and perform regular maintenance to ensure the filter operates optimally and keeps your pool water clean and safe.
Below you can find our editor's choice of the best sand filters on the marketProduct description
Intex Krystal Clear 1200 GPH Sand Filter Pump - Model 26643EG Brand New Krystal Clear Sand Filter Pump. Intex's Sand Filter Pumps use a powerful 0. 25 horsepower motor to achieve a 1200 GPH water flow rate (1050 GPH System Flow Rate). Best suited for Intex above ground pools with a 16 ft diameter or smaller. The pool owner is able to easily operate the unit in 6 modes: Standard Filtration, Backwash, Rinse, Re-circulate, Drain and Close. Sand Filter Pumps are the lowest maintenance option, requiring sand replacement only every 5 years on average. Sand Filters represent approximately 38% of pool filtration systems, compared to 27% for Diatomaceous Earth (DE) systems. Sand & Cartridges filters are growing while DE filters are declining due to the increasing number of municipalities that are banning them. Timer Feature- Set the timer to the desired operating hours. 2, 4, 6, 8 or 12 hours. Turn the pump on by pressing the timer switch. The filter pump will filter the water and stop after the operating hours are complete. The built-in timer will operate for the number of hours selected automatically at the same time each day. Operating hours can be re-adjusted if necessary. The pump can also operate continuously by pressing the "l" on switch. Sand Filter Pumps offer genuine advantages to pool owners: Ergonomic handle for easier operation Heavy duty 10" tank 26 lb sand capacity 18 lb glass capacity Durable pump enclosure for more protection Pressure Gauge Includes 1 Intex Krystal Clear 1200 GPH Sand Filter Pump - Model 26643EG - 110-120 Volt GFCI 2 - 1 1/2" diameter hoses 1 - Instruction Manual 2 Year manufacturer's direct
- Pump flow Rate: 1200 GPH. System flow Rate: 1, 050 GPH
- 6 function control - enables pool owner to filter, backwash, rinse, recirculate, drain & close system
- 24-Hour automatic timer
- The strainer basket provides easy-cleaning, and prolongs the life of the sand.
- Hydro aeration technology is incorporated into the filter pump for improved circulation and filtration, improved water clarity and increased negative ions at the water surface
User questions & answers
Question: | Can this be used on a 12x33 inter pool |
Answer: | Would be a little small I would step up to the 12" |
Question: | Will the 10in be ok for a 18x48 summer waves pool |
Answer: | No I had a 10" for my pool that size that's why I upgraded to 16" and it is perfect! |
Question: | Why is this product being aloud to be sold for more than double the manufacturer’s sale price of |
Answer: | Price gouging |
Question: | Would there be a problem using it on a 1900 gallon pool |
Answer: | No. A little overkill but you wouldn't have to run it very long each day, It can be set to run from 1 hour to 12 hours a day or can be run constantly or manually on and off. And you would have the sand filtering which is very nice. |
Product description
Founded in 1971, Herman Schwimmer built the foundation of Swimline with happiness at the forefront, and the goal of bringing a pool to every family in America with his high quality pool liners. Almost 50 years & 3 generations later, Swimline has become a world leader in the pool industry, expanding into pool toys, pool maintenance and watersports equipment. We pride ourselves on being a family company that puts our customers needs first while delivering the highest quality products. When it comes to making memories on the water, Swimline has you covered.
- The world leader in the pool equipment industry
- Swimline was the largest manufacturer of above-ground pool liners, covers, and all related accessories
- High quality, durable, and safe products for your pool
User questions & answers
Question: | Does anyone have any reviews on this product. Works good or crap |
Answer: | Yes I have one my pool is 15 by 4 work good on it but it doesn't have bypass to just move water round when you sock it. |
Question: | How much sand does this hold |
Answer: | 42 lbs |
Question: | Is it set up to be able to backwash |
Answer: | Yes you can backwash with this filter |
Question: | What adapters do I need to get in order to use on a Bestway 15' x 42" pool |
Answer: | This pump coming with 2hoses also fitting compatibility with intel and Bestway |
Product features
Pool Inflatables, Toys & Games
Luxury pool floats, toy & games to keep you floating in style.
Pool Liners & Covers
Liners & covers to keep pools in shape for all seasons.
Pool Maintenance
Maintenance equipment to support all of your pool needs.
Solstice by Swimline
High end water sports and boating merchandise.
Product description
Keep your above ground pool water clean, fresh, and sparkling with the Intex 26679EG 16-inch Krystal Clear Saltwater System and Sand Filter Pump. The all-natural sand provides excellent water filtration as the 6 function control valve allows the pool owner to filter, backwash and rinse, recirculate, drain, and close the system. The built-in 24-hour timer adds to the hassle-free experience with maintaining a cleaner pool. The Krystal Clear Sand Filter Pump generates a pump flow rate of 2,650 gallons per hour, ideal for above ground pools. Equipped with the Ground Fault Circuit Interrupter, which is an added safety feature that shuts off the pump if electrical current is exposed to water. This effective pump requires virtually no maintenance except replacement of sand every 5 years. With the Saltwater System’s electrocatalytic oxidation process, water molecules are split into oxidants that help keep the water clean. The amount of chlorine generated by the saltwater system is reduced by approximately 60%, much less than other saltwater systems generate. Enjoy the same process used at many resorts in your own pool with the 16-inch Intex Krystal Clear Sand Filter Pump and Saltwater System.
- FILTER PUMP: The Intex Krystal Clear filter pump with Hydro Aeration Technology improves circulation and filtration, improves water clarity, and increased negative ions in the water; Runs on 110-120V and weighs 54.9 pounds
- COMPATIBLE: The Intex pump is compatible with above ground pools from 4,800 to 15,000 gallon capacity
- AMPLE PUMP AND SYSTEM FLOW RATES: Features a pump flow rate of 2,650 GPH and system flow rate of 2,150 GPH; Equipped with GFCI for added safety that shuts off the pump if electrical current is exposed to water
- BETTER THAN A STANDARD CARTRIDGE SYSTEM: Easy operation 6-way filter valve makes maintenance easy, giving options to backwash, rinse, recirculate, drain, filter, and close system; Controlled automatically with a built-in 24-hour timer
- 16-INCH SAND FILTER TANK: Heavy-duty 16-inch sand filter tank diameter (sand not included); Safe chlorine is produced and salt is added and passed through the titanium-coated electrolytic cell during filtration
- 2-year manufacturer's warranty
- Power source type: Corded Electric
User questions & answers
Question: | Does this pump have a variable speed |
Answer: | No it does not. |
Question: | How many plunger valves and hose adapters does this pump take |
Answer: | Depending on your pool model I have just two plunger valves that came with my pool and if you use the plunger valves you do not need adapters looking at my pool there are two different types of plunger valves there is one that is a “T” that the two inlet hoses connect to and one that is just an elbow that is for the outlet the hoses that comes with this pump will connect to those plungers I hope this helps out |
Question: | Pressed power button and pressed pump button and cannot get it to go in filter pump fp mode. how do i get into first initial filter pump mode |
Answer: | Keep pressing the pump button, it will go through the number of hours, 1 through 12 and then FP follows 12 |
Question: | Can you use DE in addition to the sand for better water quality |
Answer: | From the research I did prior to buying this,yes you can. I think, from what I have read, that it would be better with 100 lbs of sand and topped off with the de. It holds up to 120lbs. I have the 100lbs of sand in mine and am happy with it for now. |
Product description
19" Sand Filter Combo for above ground pools. Fully integrated sand filter, pump pressure valve, and stand. 4,500 gallons per hour pumping capacity. 175 pounds per hour sand pumping capacity. Just add the filter media and hook up the hoses, plug it in and it starts filtering immediately
Features:
- Pump and filter are perfectly engineered to provide optimum flow rates that promotes clean water quality
- Maximize flow and reduce noise while the energy efficient motor with commercial-grade frame
- Heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation
- 5-Way multi port provides for easy use and quick to use
- Flow rate of 4,500 Gallons Per Hour swimming pool pump works swiftly and efficiently
- Pump strainer basket is the largest in its class with an easy open, quick lock, transparent pump lid which mean less work and more swimming
- Machine will protect users's safety entirely with build-in automatic thermal overload protector
- Pump components are fiberglass-reinforced for superior strength and durability
- Self-priming pump with durable construction for all-weather
Specifications:
- Type: Sand Filter System
- Pool Type: Above Ground
- Filtration Area: 18,000 Gallons
- Drum Capacity: Holds up to 175lbs
- Valve Function: Filter, Backwash, Closed, Rinse and Waste
- Pump Power: 1.5HP
- Voltage: 115V/60Hz
- Flow Max: 4,500GPH
- Filter Media Included: No
- Inlet/Outlet Fitting: 1-1/2"NPT
- Max Temperature: 122F
- Certification: UL Listed
- Overall Dimension: 28-1/2"(W) x 21-1/2"(L) x 31-1/2"(H)
Package Contents:
- Sand Filter
- Pool Pump
- System Tray
- 5 Way Valve
- Hose Adapters
These pumps are capacitor start and not for use/sale in California
- 🏊Sand Filter System - Pump and filter are perfectly engineered to provide optimum flow rates that promotes clean water quality
- 🏊Low Noise Design - This sand filter pump is designed and optimized for running with low noise, to make your work more comfortable and energy efficient
- 🏊Dependable Performance - This filter keeps the sand height level to expose water to the maximum sand surface level possible for optimum filtration, consistent performance, and efficient back-washing
- 🏊5-Way Multi-Port Filter - 5-Way multi port provides for easy use and quick back-washing; These pumps are capacitor start (These pumps are capacitor start and not for use/sale in California)
- 🏊Strainer Basket- Pump strainer basket is the largest in its class with an easy open, quick lock, transparent pump lid which mean less work and more swimming
User questions & answers
Question: | How dose the warranty work |
Answer: | Very complicated |
Question: | How many bags of sand is required |
Answer: | If I remember right it holds 148 pounds. Most of the bag are 30 to 40 pounds. I ended up getting it from ace hardware. |
Question: | Does it have a timer |
Answer: | No you have to purchase separately |
Question: | Does this come with a Warranty ? If so how long |
Answer: | yes, but read the fine print. |
Product features
Sand Filter System
Sand Filter System - Pump and filter are perfectly engineered to provide optimum flow rates that promotes clean water quality
Low Noise Design
Low Noise Design - This sand filter pump is designed and optimized for running with low noise, to make your work more comfortable and energy efficient
Dependable Performance
Dependable Performance - This filter keeps the sand height level to expose water to the maximum sand surface level possible for optimum filtration, consistent performance, and efficient back-washing
Multi-Port Filter
Multi-Port Filter - Multi port provides for easy use and quick back-washing; These pumps are capacitor start (These pumps are capacitor start and not for use/sale in California)
XtremepowerUS Sand Filter Above Ground Swimming Pool Pump Media System
Sand Filter Combo for above ground pools. Fully integrated sand filter, pump pressure valve, and stand. 4,500 gallons per hour pumping capacity. 175 pounds per hour sand pumping capacity. Just add the filter media and hook up the hoses, plug it in and it starts filtering immediately
Filter Balls Media Chart:
- THE MOST EFFECTIVE JETTED TUB CLEANER - Oh Yuk's jetted tub cleaner is specifically designed to break down and remove the Yuk from the inside of your jetted bathtub, jacuzzi, or whirlpool, for a safe, clean, and healthy bathtub!
- SCIENTIFICALLY ENGINEERED to remove dirty soap build-up, bath and body oils, and black flakes!
- 15 MINUTES PER CLEANING - Cleans your tub in just 15 minutes: just run your water, pour in our cleaner, and run your jets!
- LABORATORY AND FIELD TESTED TO PRODUCE RESULTS Our product is laboratory and field tested to produce squeaky clean and superb results!
- FOUR CLEANINGS PER BOTTLE Get up to four cleanings out of one 16 ounce bottle!
User questions & answers
Question: | I ran 4 cycles with 4 oz. each time with bleach/dishwasher soap in between. There are no black specs only a green tub ring. R the jets clean yet |
Answer: | Hillary. It doesn't do any good to run bleach/dishwasher soap in between cleanings with Oh Yuk. Bleach and/or dishwasher detergent can't remove the type of soiling in the jetted tubs plumbing system. It sounds like your jets are clean since you don't see more debris or specs in the tub. On the green tub ring, I'm not sure what could cause this. Do you have an acrylic tub? You could try different cleaning methods to remove the green stain. Try 409, rubbing alcohol, Lime & Scale or CLR. DO NOT MIX THE CHEMICALS TOGETHER, try them separately. |
Question: | Should I keep using this if I am halfway through my third bottle and have used this each time consecutively? Brown-green sludge comes out each time |
Answer: | What I understand is the method to clean, is to first fill tub will hot water above jet line and drop in 2 doses of dishwasher soap and run for at least 30 min (since this is dishwasher soap, low suds). This loosens the gunk / sludge. Drain the tub and refill with hot water. I follow the bottle directions and use 1/4 of the Oh Yuk bottle and run the jets for 15-30 minutes. Drain. Then fill with cooler water and run for 15 min. This is the rinse cycle. Then it should be good. I have used Oh Yuk for some time and clean my tub every 10 uses. Since I am the only one using the tub, I know the residue is just body oils and and sludge that grows in the jets. I also run my bath exhaust fan for 1 hour after using the tub to help in drying the water in the jets. I hope this helps. |
Question: | Does it contain bleach?? Will it hurt curtains if it splatters on them |
Answer: | No the product does not contain bleach and it should not harm fabrics like curtains. |
Question: | Will it work on my air jetted jacuzzi tub |
Answer: | The bottle says jetted bathtub cleaner. There is no other equipment noted on the bottle. A website for the manufacturer is on the bottle: www.ScientificBiofilmSolutions.com. A phone number is also available from the label (651) 789-6921. This product is manufactured in the US. I hope this information is helpful. |
Question: | So would it work with an intex sand filter pump, particle sand range size |
Answer: | The smaller the particles the better it is. It will filter out more bactiria and keep.it clearer. Try and stay at the minimum range size. |
Question: | If Im use this sand for the fishtank what kind a filter I should use |
Answer: | Just use a pre-filter on your intake tube |
Question: | is one 50# bag enough for a standard 55 gallon aquarium |
Answer: | I used mine for exactly that purpose and will post a pic of it in my review. One 50# bag will fill a 55gal tank to an avg depth of about 2 inches. For most people, this is sufficient, however, I think I need more for planting and aquascaping. It is really beautiful and cheap silica sand for aquarium purposes. |
Question: | What color is the sand. I'm not using it for a pool. Im using it as aquarium substrate |
Answer: | That's a great idea. I have a refugium in the sump that grows plants and the sand actually grows a little algae making it have a natural peppered look. I'd have to take a close up of it. Through my testing, thus sand does not alter water chemistry at all so it is good. I only use half bag. Best of luck and feel free to ask more questions. |
Product description
The Hayward ProSeries 18-inch Above-Ground Pool Filter system includes an 18" polymeric tank, a 7-position filter control valve, a 1 HP PowerFlo Matrix pool pump, a one-piece deluxe base and a 1 1⁄2" hose package—and it’s performance matched with our above-ground pump series to ensure a system that maximizes its filtration ability. It utilizes a precision-engineered umbrella-fold self-cleaning lateral system to provide efficient flow and evenly distributed water for long lasting performance.
- The Hayward ProSeries 18-Inch Above-Ground Pool Filter System includes an 18" polymeric tank, a 7-position filter control valve, a 1 HP PowerFlo Matrix pool pump, a one-piece deluxe base and a 1 1⁄2" hose package
- 7-position VariFlo valve provides maximum flow at lower pressure drop
- Large pressure sand/water drain for rapid winterizing or servicing
- Pump-to-filter union connection provides simple installation and winterization
- Integral top diffuser ensures even distribution of water over the entire sand bed for maximum use of the filtration area
User questions & answers
Question: | Does it come with everthing needed (hoses and attachments) to upgrade from the filter pump that comes with the Coleman 18' round pool |
Answer: | The Hayward ProSeries Top-mount Sand Filter System model # S180T92S includes the S180T Sand Filter, SP0714T VariFlo XL Multiport Valve, PowerFlo Matrix 1 HP Above-ground Pool Pump, connector hose with adapters and clamps for pump to filter valve, two 6' lengths of 1-1/2" ID hose with adapters and clamps for connection to a pool. |
Question: | do I have to purchase sand or does it come with it |
Answer: | Yes you have to buy the sand you get it at Home Depot or lowes its about 8 dollars a bag and you need about one and a half bags 150 pounds if you get the 18 inch |
Question: | Can this be used as a vaccum system for above ground pool it only had a skimmer with cartridge filter that doesn't work all that well need to get sand |
Answer: | That is exactly what I purchased this pump for, to replace a cartridge filter. This is a great pump. I hooked it up to my skimmer and also used it to vacuum the bottom of the pool. While vacuuming the bottom you can bypass the filter & discharge the water from the pool to eliminate very fine particles. |
Question: | I just want to know what is included |
Answer: | The Hayward ProSeries Sand Filter Systems includes the sand filter, filter pump with cord, base for filter and pump, VariFlo XL Multiport Valve model # SP0714T, (2) 1-1/2" x 6' hoses with adapters and clamps for connection to the pool's suction and return ports. |
Product features
Hayward ProSeries System
Maximize Your Filtration Ability
Pro-Series filters are performance matched with our above-ground pump series to ensure a system that maximizes its filtration ability. They utilize a precision engineered umbrella-fold self-cleaning lateral system to provide efficient flow and evenly distributed water. A broad selection of filter sizes, pumps, and accessories allows you to choose the system that best suits your above-ground pool needs.
ProSeries Specifications:
- Filter Type: High-rate sand: No. 20 silica sand (.45 mm – .55 mm).
- Filter Tank: Molded polymeric.
- Underdrain: 360° self-cleaning slotted laterals, precision installed in ball-joint assembly.
- Control Valve: Seven-position, top-mount VariFlo valve with lever-action handle.
- Valve Fastening: Flange clamp design.
- Pump and Motor: PowerFlo LX or PowerFlo Matrix Series Pump – 115 volts.
- Mounting Base: Injection-molded thermoplastic.
Product description
This pool sand filter is ideal for most in ground and above ground pools for filtering sand and clearing the water. It is able to apply for several water feature including fish ponds, fountains, water gardens. It features flange clamp design providing 360 degree rotation of valve for simplify plumbing.Features:Sand Filter System are perfectly engineered to provide optimum flow rates that promotes clean water qualityThis filter keeps the sand height level to expose water to the maximum sand surface level possible for optimum filtration, consistent performance, and efficient back-washingCompact housing for all-weather functionality Impeller designed with brass inserts for long life and superior performance. Each tank is individually tested to ensure quality and reliability7-Way multi port provides for easy use and quick back-washing (Filter, Backwash, Winter, Re-Circulate, Closed, Rinse and Waste)8 Hydraulically balanced laterals, speed up flow velocity of filtered waterFilter is designed to handle the filtration needs of many of today's pools. It provides an efficient, easy-to-use operating system that will assist in keeping your above-ground pool water crystal clean and safe for swimmingSpecifications:Type: Sand Filter SystemPool Type: Above GroundFiltration Area: 21,000 GallonsDrum Capacity: Holds up to 110lbsValve Function: Filter, Backwash, Winter, Re-Circulate, Closed, Rinse and WasteFilter Media Included: NoInlet/Outlet Fitting: 1-1/2"NPTOverall Dimension: 16"(W) x 16"(L) x 32-1/4"(H)Package Contents:Sand Filter6-Way Multi-Port FilterStandManual
- Sand Filter System - The Filter are perfectly engineered to provide optimum flow rates that promotes clean water quality
- Dependable Performance - This filter keeps the sand height level to expose water to the maximum sand surface level possible for optimum filtration, consistent performance, and efficient back-washing
- Heavy Duty Design - Compact housing for all-weather functionality Impeller designed with brass inserts for long life and superior performance. Each tank is individually tested to ensure quality and reliability. Above ground pool owners can enjoy the same high performance, outstanding operating efficiency, and long-term reliability as inground pool owners
- 7-Way Multi-Port Filter - Multi port provides for easy use and quick back-washing (Filter, Backwash, Winter, Re-Circulate, Closed, Rinse and Waste)
- With a threaded connections, a filter base and user's manual. Includes 7-position valve, this tank holds 110lbs of media sand; Overall Dimension: 16"(W) x 16"(L) x 32-1/4"(H)
User questions & answers
Question: | Is this the complete system or do you have to buy a pump to attach to it |
Answer: | You will need to buy pump and all hoses to connect. |
Question: | What size is the tread fittings for the hoes? The hoes that came with the pool does not fit |
Answer: | 1.5" fittings |
Question: | Does the gph of the type of pump you use make any difference in performance |
Answer: | Yes. The GPS determines how quickly you circulate the total pool contents. There are several online tools to measure how many GPH your pump needs to effectively filter your pool. just Google "how many gph should my pool filter move" |
Question: | Will this work with 18x32 28,000gal pool |
Answer: | My pool is 18 ft round by 52 inches deep and holds about 8,000 gallons of water. Filter works great for this size. 28,000 gallons is probably too much for this filter to handle. |
Product features
Sand Filter System
Sand Filter System - Pump and filter are perfectly engineered to provide optimum flow rates that promotes clean water quality
Low Noise Design
Low Noise Design - This sand filter pump is designed and optimized for running with low noise, to make your work more comfortable and energy efficient
Dependable Performance
Dependable Performance - This filter keeps the sand height level to expose water to the maximum sand surface level possible for optimum filtration, consistent performance, and efficient back-washing
Multi-Port Filter
Multi-Port Filter - Multi port provides for easy use and quick back-washing; These pumps are capacitor start (These pumps are capacitor start and not for use/sale in California)
XtremepowerUS Sand Filter Above Ground Swimming Pool Pump Media System
Sand Filter Combo for above ground pools. Fully integrated sand filter, pump pressure valve, and stand. 4,500 gallons per hour pumping capacity. 175 pounds per hour sand pumping capacity. Just add the filter media and hook up the hoses, plug it in and it starts filtering immediately
Filter Balls Media Chart:
Product description
HAY S180T 18 INCH SAND FILTER
From the Manufacturer
Pro Series sand systems are designed and equipped to offer the ideal combination of energy efficiency and outstanding water clarity. A broad selection of filter sizes and accessories allows you to choose and merchandise the system(s) that best suit your above-ground pool program.
- High-performance top-mount sand filter for above-ground pools, small in-ground pools, and aquariums
- Corrosion-proof filter tank molded of color-fast material for long-lasting; 7-position vari-flo valve provides maximum flow at lower pressure drop
- Durable; large pressure sand/water drain for rapid winterizing or servicing; round base included; all-weather performance
- Flange clamp design allows 360-degree rotation for easy installation
- Integral top diffuser ensures even distribution of water over the entire sand bed for maximum use of the filtration area
User questions & answers
Question: | Does this include everything except the sand, pump, and hoses? All the gaskets & clamps for the vari-flow and are internal lateral arms included |
Answer: | it has the clamp that goes around the top of the sand filter but not the hose clamps itself and yes it does come with the laterals |
Question: | I have an Intex Salt System with Filter & Pump. Does anyone know what size Sand Tank I need to replace my cartridge filter for this 2000 GPH Pump |
Answer: | Don't know if this is what you're looking for, but this pump I got from Hayward through Amazon uses 150 lbs. of sand. On the issue of converting from cartridge to sand, iot you still have your manual for your cartridge pump, there are probably specifications listed on its capacity, GPM, etc. Then you could Google to find a sand filter of comparable capacity. I will say this for Hayward - I have owned their pumps for over 30 years, and I only had to call their customer service people 2 or 3 times...but each time they were EXTREMELY helpful. If you know your capacity, I bet they could tell you which Hayward pump is a equal. Maybe even a local pool dealer might know that?? |
Question: | Is a 1.5 hp pump too strong for a 16” Hayward sand filter |
Answer: | No that’s the size pump have with mine works great |
Question: | How much sand do i add |
Answer: | It should tell you in the instructions... but I went to a Pool Supply store and they told me how many bags to buy... I believe it was 4-5 bags... I don't remember how much each bag weighed... (sorry) |
Product description
Hayward’s ProSeries 24-Inch High-Rate Top-Mount Sand Filter utilizes a precision-engineered umbrella-fold self-cleaning lateral system to provide efficient flow and evenly distributed water for totally balanced backwashing and long-lasting performance. Engineered with corrosion-proof, polymeric materials and self-cleaning 360° slotted laterals, ProSeries ensures dependable operation for in-ground pools of all types and sizes, in-ground spas and water features. A versatile 6-position 1.5" VariFlo control valve offers both easy operation and maximum efficiency, too. For crystal clear, sparkling water without maintenance hassle, look no further than the ProSeries top-mount filter.
- The Hayward ProSeries 24-Inch Top-Mount Pool Filter features efficient, multilateral underdrain assembly with precision-engineered, self-cleaning 360° slotted laterals for totally balanced flow and backwashing
- Integral top diffuser ensures even distribution of water over the top of the sand media bed
- Unitized, corrosion-proof filter tank is molded of rugged, colorfast polymeric material for dependable, all-weather performance
- 6-position Hayward VariFlo control valve with easy-to-use lever-action handle lets you dial any of the valve/filter functions
- Large pressure sand/water drain for rapid winterizing or servicing
User questions & answers
Question: | Does it come with the 1 1/2 inch valve or the 2 inch valve |
Answer: | This filter comes with a 1.5" valve. If you have any other questions you can also call 800-950-2210. FamilyPoolFun |
Question: | is this filtera good for a 24,000 gal pool |
Answer: | I have it on a 25000 gal. in ground pool and it works great. |
Question: | does it come with the sand |
Answer: | Nope. The required pounds of sand are in the specs and on the label. It will be at least 200 lbs. |
Question: | What is difference between this and de |
Answer: | There are two basic differences between a sand filter and a DE filter. First is filtration. A DE filter can filter debris down to 5 microns in size; the sand filter can remove debris down to 40 microns in size. The second difference is required maintenance. For either filter this is usually done every six months or when the pressure gauge reads ten pounds above the pressure reading when it was cleaned. The DE filter most be disassembled and each filter element cleaned. Once cleaned, the elements are inspected for damage. If otherwise okay, the filter is reassembled, the equipment is turned on, and the filter is checked for leaks. After this, DE is introduced to the filter through the skimmer. Then you have to clean the mess the cleaning made. Total time to do: 45 minutes to and hour and a half, depending on the mess. The sand filter is cleaned by running the discharge hose to the sewer cut out, rotating the multiport valve to back flush, and turning the equipment on for a few minutes. The equipment is turned off, the multiport valve is rotated back to filter, and roll up the discharge hose. Total time to do: 10 to 20 minutes, depending on how long the discharge hose is. |
Product features
Hayward ProSeries
ProSeries top-mount and side-mount sand filters utilize a precision engineered umbrella-fold self-cleaning lateral system to provide efficient flow and evenly distributed water for totally balanced backwashing and long lasting performance.
ProSeries Sand Filters
Hayward's line-up of ProSeries sand filters sets the bar for performance and dependability. ProSeries filters are molded of durable, corrosion-proof material for long-lasting performance. Advanced, self-cleaning laterals provide smooth and efficient flow with totally balanced backwashing. For crystal clear water with minimal care, pool professionals choose ProSeries.
(Top-Mount pictured right)
Product description
The Blue Devil Sand Filter is a high-performance, corrosion proof filter that provides superior flow characteristics and features, but is easy to use. The flange clamp design allows for a 360-degree rotation for easy installation. The top diffuser ensures even distribution of water over the top of the sand media bed while the filter can be drained quickly for rapid winterizing or servicing. The tank is molded of durable polymeric material, making it durable for years of use. This Blue Devil Sand Filter uses 175 lbs. of #20 silica sand. Design Flow Rate: 40 gpm Maximum Working Pressure: 50 psi Vertical Clearance: 47 inches Horizontal Clearance: 19 inches
- SAND SWIMMING POOL FILTER: 2.1 feet filter area is optimal for above-ground pools
- INTEGRATED WATER DIFFUSER: Top diffuser ensures even distribution of water over the top of the sand media bed to ensure proper filtering
- EASY INSTALLATION: Flange clamp design allows 360° rotation so you can easily hook up your filter
- DURABLE: Polymeric material construction is corrosion-resistant and lasts for years of quality use
- REQUIRES SAND: Filter uses 175 lbs of #20 silica sand
User questions & answers
Question: | What size hoses are needed? I have new 1.5 currently |
Answer: | The ports on the valve are 1-1/2 inch female thread. An 1-1/2” male thread x 1-1/2” hose fitting can be added to the valve, and then 1-1/2” hoses can be used. |
Question: | What size pool is this designed to used on? (gallons |
Answer: | My pool is 15,000 gallons. Works great! |
Question: | is this for inground or above ground pool |
Answer: | I use it for an above ground pool |
Question: | Does this work on a salt water pool |
Answer: | Yes, the Blue Devil Sand Filter works with a salt water pool. |
Product description
The CMP 25357-273-564 Manual Air Release Valve and Gauge is used for the Pentair 273564 sand filter.
- Pressure gauge includes built-in range indicator
- Replacement for OEM air relief valve
- For the Pentair 273564 Sand Filter
User questions & answers
Question: | Hello, Does it come with the nut and the O ring |
Answer: | It does. This comes CMP's replacement parts for Pentair's Air Bleeder pn 273512 and Air Bleeder Screw O'ring pn 273513 , Air Relief Valve Body pn 273564, O'Ring 3/16th in x 2 5/8 in i.d. pn 274495 , Female thrd Hex Black Lock Nut 2 in internal pn 154412 and Pressure Gauge pn 190059. Thank You. La Donna @ South Walton Pools |
Product description
Feature:
1. Equipped with a pump and the filter is equipped with a multi‑port valve for filtration, backwashing, rinsing and hibernation.2. It is a sand filter system that filters and purifies your swimming pool water using quartz sand.
3. For secure mounting, this pool sand filter pump set includes a base that can be fixed on the floor.
4. The sand filter system is used in private swimming pool and landscape water treatment, practical.
5. Provide home users with excellent filtration performance and simple installation and use program.
Specification:
Condition: 100% Brand New
Item Type: Sand Filter System
Material: Plastic, Stainless Steel
Filter: P350
Water Pump: SS020
Connecting Pipe Size: 1.5in/50mm
Sand Volume: 20KG
Sand Loading Height: 16cm / 6.3in
Cylinder Volume: 0.06m³
Cylinder Head Volume: 0.02m³
Maximum Flow: 72lpm 4.32m³/h
Maximum Working Pressure: 28psi/2bar
Maximum Operating Temperature: 40℃
Suggested Filter Size: 0.5-0.8mm
Product Size: Approx. 51 x 62 x 65 cm / 20.1 x 24.4 x 25.6 in
Weight: Approx. 16100g / 567.9oz
Package List:
1 x Sand Filter Water Pump Combination1 x Multi-Way Valve1 x Pressure Gauge2 x Connector1 x Connecting Pipe1 x Multi-Way Valve Rubber Ring2 x Water Pump Connector Rubber Ring1 Set x Water Pump Inlet Connector1 x English User ManualNote:
1. Please allow 0‑2 cm error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.- 【Easy to Install】For secure mounting, this pool sand filter pump set includes a base that can be fixed on the floor.
- 【Superior Filtration】This versatile filter can hold up to 44 lbs of sand, providing an all-natural alternative to wasteful cartridge or DE systems.
- 【High Efficiency】Our pools cleaner has been engineered for optimal cleaning efficiency, equipped with a pump and the filter is equipped with a multi-port valve for filtration, backwashing, rinsing and hibernation.
- 【Powerful Function】It is a sand filter system that filters and purifies your swimming pool water using quartz sand. The sand filter system is used in private swimming pool and landscape water treatment, practical.
- 【Great Pool Accessory】Provide home users with excellent filtration performance and simple installation and use program.
Product description
This filter is designed to handle the filtration needs of many of today's pools. It provides an efficient, easy to use, simple to install and operate system that will keep pool water clean and sparkling. The core of these systems is the one-piece blow-molded tank that sits atop a universal base that accepts most pumps. It has set the industry standard for effectiveness, efficiency, long runs between service, and providing years of dependable, low maintenance operation.
- CLEAN AND SAFE WATER - This filter is designed to handle the filtration needs of many of today's pools. It provides an efficient, easy-to-use operating system that will assist in keeping your above-ground pool water crystal clean and safe for swimming.
- WILL IT FIT MY INGROUND POOL? - The Rx Clear Radiant 24-inch sand filter is designed for inground pools measuring up to 33,000 gallons. It is compatible with the following swimming pool sizes: 12’ round, 15’ Round, 18' Round, 21' Round, 24' Round, 27' Round, 30' Round, 33' Round, 12’ x 24’ Oval, 15' x 24' Oval, 18' x 33' Oval and 18' x 36' Rectangular
- EASY TO INSTALL - Labeled ports on the 6-way top mount filter valve are clearly visible for the pump and return. Comes with 1.5 inch threaded connections, a filter base and user’s manual.
- FILTER MEDIA OPTIONS AVAILABLE - For optimal performance, this 24” unit requires the following media amounts: 6 Boxes RX Clear Luster Filter Media, 150 lbs.of Zeo-Clear Filter Media or 300 lbs of traditional Grade 20 Silica Sand
- DURABLE - The core of these systems is the one-piece blow-molded tank. The interior consists of the stand pipe and laterals. This filter tank comes with a 3-Year limited warranty against manufacturer’s defects. Filter media and hoses are sold separately.
User questions & answers
Question: | Can you purchase drain plug for bottom of the sand filter |
Answer: | Not sure |
Question: | does this come with the pump or just the filter |
Answer: | Just the tub and valve. No pump and no sand. |
Question: | Where can I find a replacement drainage cap |
Answer: | Sorry, I can't answer that. I do know the one I bought is a piece of junk. Just had it for a couple of weeks. Been more trouble than I have had with any of the pool fixtures. The handle on top will not turn to anything except filter. So I can't backwash or waste. I notified Amazon and get I no answer. |
Question: | s a 1.5 HP pump too big for this filter |
Answer: | I have 1.5 HP pump. I did have to replace a hose, but it has worked just fine and the filter has done a good job. Hopefully this helps. |
Product features
Rx Clear Radiant Sand Filter
This filter is designed to handle the filtration needs of many of today's pools. It provides an efficient, easy to use, simple to install and operate system that will keep pool water clean and sparkling. The core of these systems is the one-piece blow-molded tank that sits atop a universal base that accepts most pumps. It has set the industry standard for effectiveness, efficiency, long runs between service, and providing years of dependable, low maintenance operation.
Rx Clear Luster Filter Media
Unlike sand, Luster Balls won’t clog your filter and will require less backwashing for maintenance purposes. Perfect replacement for sand filter sand, filter glass and other glass media.
Benefits:
Latest Reviews
View all
Pals Garden Sculptures
- Updated: 14.04.2023
- Read reviews

Canon Inkjet Printers
- Updated: 04.02.2023
- Read reviews

Ping Golf Clubs
- Updated: 23.03.2023
- Read reviews

Clothing Dye
- Updated: 16.02.2023
- Read reviews

Poulan Pro 24 Snow Thrower
- Updated: 22.02.2023
- Read reviews