12 best commercial protein skimmers

Product description

The Macro Aqua M-50 Hang-on Protein Skimmer is for up to 60 gallon aquariums (depends on stocking). This protein skimmer will effectively eliminate organic waste. The M-50 operates easily, where there will be no need to prime (just plug-and-play). The collection cup can be removed easily to dispose waste. This beautiful skimmer will surely please your tank.

• High quality protein skimmer for up to 60 gallon tank (depends on stocking)
• Small hang-on back skimmer; Water Flow: 238gph
• Effectively eliminates organic waste. Simply remove the collection cup to dispose tank waste
• Easy to install and operate. No priming required
• Needle-to-wheel impeller - increases air to water contact

User questions & answers

Question:	About how long is the intank part that go in the tank
Answer:	I’d say it’s Approximately 7-8” deep down inside the tank total.
Question:	How can I get the overflowing bubbles from the top to stop? I think I have both nobs on the power setting but it still bubbles up and out
Answer:	Return it mine was working perfectly for about 3 months and then drained about 15 gallons out of my aquarium had to empty aquarium move it dry out all and replace carpet nightmare
Question:	Can someone give me the total width of the intake and discharge on the back? i need it to fit into an area 4.75" wide
Answer:	For a fluval edge 12g? I'm looking for the same thing. I've been looking for a year. Considering cutting off the glass top entirely.
Question:	Does this put out much of a water flow I’m planning to put seahorses in a 5 gallon nano tank and they can’t take much water flow has to be for the qui
Answer:	No it doesn't, but do not recommend for a 5 gal. Please don't place a seahorse in a 5 gallon. It should be 30 at the least

Product features

Macro Aqua M-50

The Macro Aqua M-50 is one of the best protein skimmers for saltwater aquariums.

The Macro Aqua M-50 Hang-on Protein Skimmer is for up to 60 gallon aquariums (depends on stocking). This protein skimmer will effectively eliminate organic waste. The M-50 operates easily, where there will be no need to prime (just plug-and-play). The collection cup can be removed easily to dispose waste. This beautiful skimmer will surely please your tank.

Product description

The NEW AquaMaxx HOB-1.5 is an upgraded and more-powerful version of AquaMaxx`s best-selling HOB-1. With an enlarged bubble diffusor and reaction chamber, the new HOB-1.5 is able to fully harness the power of the Shark 1.0 pump to maximize foam production and protein extraction. The custom conical bubble diffusors help minimize the turbulence inside the reaction chamber and help to direct water linearly up toward the collection cup. More waste than ever is pulled out of your aquarium and into the easy-to-remove collection cup. AquaMaxx skimmers are computer-precision engineered and utilize the latest filtration technology to deliver the performance and value you are looking for in a protein skimmer. EASE OF USE AquaMaxx HOB-1.5 protein skimmers is easy to setup and maintain. Just move the collection cup up or down to adjust the foam level to wet or dry. Maintenance is simple. A removable collection cup makes cleaning easy. Plus, every AquaMaxx protein skimmer includes a drain fitting for hobbyists who want to setup a separate reservoir for skimmate. Water quality and consistency is crucial to the success of a marine aquarium. An AquaMaxx HOB Series I protein skimmer will help to ensure that success. COMPACT DESIGN AquaMaxx protein skimmers were designed from the ground up with the hobbyist in mind. AquaMaxx HOB Series I protein skimmers have the pump placed inside the skimmer itself to save space, reduce noise and improve efficiency. Each unit is precision-cut and made of polished cell-cast acrylic. PERFORMANCE AquaMaxx HOB-1.5 Skimmers feature high-quality Italian-made Sicce pumps. Each Sicce pump motor block is then modified and fitted with proprietary AquaMaxx needle wheel impellers. With the precise modifications and upgrades, performance is boosted much beyond that of a stock pump. The upgraded AquaMaxx ‘Shark’ pump is capable of drawing in significantly more air and chops them up to the optimum bubble

• Dimensions: L 7.5 x W 3.5 x H 17 Inch
• Minimum tank height 10-7/8"
• Requires approximately 4" of clearance to remove collection cup.
• Fits aquarium rims up to 3/4" thick.

User questions & answers

Question:	Will it fit in the back chamber of a biocube 32 gallon
Answer:	I can't tell you that for sure but this is a bit much for that tank. They make a smaller version of this. I have this on a 75.
Question:	Anyone figure out the bubbles issues? I can't get them to stop
Answer:	As Tom Campbell said, get a 1/4 inch Barb Valve from Home Depot used for drip irrigation and zip tie it to an inch of the yellow hose you have to cut off. You can then regulate the airflow just like every other protein skimmer ever made. Horrible inexcusable design flaw. Valve costs less than 2 bucks. Also look into the output bubble filter thing they sell as an option. The first time I turned this thing on was a catastrophe.
Question:	How do u connect the collection drain pipe intoe xternal drain
Answer:	The lid for the right side of the skimmer has a air hose and silencer for the Venturi and on the lid it has a corner missing. That corner would be turned where the overflow pipe can slide in to the chamber. And it’s not a cup drain, it’s purely an overflow so if the cup isn’t changed the skimmate won’t run in the floor, it will overflow back in to the skimmer.
Question:	Will this unit fit if you have a canopy top or does it sit back far enough to clear the canopy
Answer:	What do you mean by canopy top? If you mean one with hinges that goes opens toward the back of the tank, the skimmer is at 90 degrees so it would be close. You also have to account for the plumbing going into the tank. I have a biocube 32 and it does not work with the lid. If you have more questions or this doesn’t help PM me on IG @ bhmcubereefer

Product description

Reef octopus pinwheel/needle wheel skimmers provide you with a high performance features in an easy to use package. Better foam production is provided by hailea otp pumps. New pinwheel impellers provide up to 100% improved performance. 4 inch cone-neck eases transition from bubbles into collection cup. Easy cleaning is provided by quick-release neck. Gate valve allows for easier water level adjustments. Designed for in sump use only.

• Coral vue octopus 4-inch needle wheel skimmer 100gal
• Reef octopus pinwheel/needle wheel skimmers provide you with a high performance features in an easy to use package
• New pinwheel impellers provide up to 100% improved performance

User questions & answers

Question:	Will this work hang on aquarium? I don't have a sump
Answer:	Hello ER, No this needs to be in a sump and in about 8inch of water. There are some hang on the back skimmers though, just keep looking.
Question:	Will this fit a Waterbox 35.1 sump
Answer:	not too sure
Question:	model number is INT which is installed inside sump but photo is an EXT which is installed outside. Which one is it
Answer:	No. The photo is a INT. It is a Internal sump protein Skimmer.
Question:	How deep does the water have to be in the sump
Answer:	According to the enclosed directions: 180-200 mm/7-7.9 inches for the 110-INT 200-220 mm/7.9-8.7 inches for the 150-INT & 200 INT

Product description

This package combines the Reef Octopus Classic BH-1000 Protein Skimmer and the AutoAqua Smart Skimmer Security. Use your Reef Octopus Classic BH-1000 with the reassurance that if the skimmer cup were to overflow the AutoAqua Smart Skimmer Security sensor would turn off the Reef Octopus Skimmer Pump. The Reef Octopus Classic BH-1000 Protein Skimmer is a favorite hang-on back skimmer. Capable of filtering aquariums from 78 to 130 gallons, the Classic BH-1000 features an easy to install and operate design in which the pump is mounted outside the aquarium. To install, simply place the skimmer on the back of the aquarium, mount the pump in place, adjust the intake strainer and it's ready to skim. Pump: Aquatrance 1000 Pinwheel. Footprint: 8" X 3.5", 17" tall. Installation: Hang-on. The AutoAqua Smart Skimmer Security uses the uniquely-designed contactless optical sensor to prevent the protein skimmer from overflowing. No moving parts to service or fail making this unit incredibly reliable. A magnetically coupled sensor makes it super easy to install and adjust the desired level in the collection cup.

• This package combines the Reef Octopus Classic BH-1000 Protein Skimmer and the AutoAqua Smart Skimmer Security. Use your Reef Octopus Classic BH-1000 with the reassurance that if the skimmer cup were to overflow the AutoAqua Smart Skimmer Security sensor would turn off the Reef Octopus Skimmer Pump.
• The Reef Octopus Classic BH-1000 Protein Skimmer is a favorite hang-on back skimmer. Capable of filtering aquariums from 78 to 130 gallons, the Classic BH-1000 features an easy to install and operate design in which the pump is mounted outside the aquarium. To install, simply place the skimmer on the back of the aquarium, mount the pump in place, adjust the intake strainer and it's ready to skim.
• Pump: Aquatrance 1000 Pinwheel. Footprint: 8" X 3.5", 17" tall. Installation: Hang-on.
• The AutoAqua Smart Skimmer Security uses the uniquely-designed contactless optical sensor to prevent the protein skimmer from overflowing. No moving parts to service or fail making this unit incredibly reliable. A magnetically coupled sensor makes it super easy to install and adjust the desired level in the collection cup.

Product description

Seaclone's exclusive turbo-venturi injector system mixes filtered water and air in the pump impeller chamber, creating a froth of micro-bubbles for maximum skimming efficiency and improved gas exchange. Air and water swirl together in the vortex reaction chamber, creating a powerful tornado effect that rapidly draws dissolved wastes from aquarium water. The spiraling air/water mixture propels protein-laden bubbles upward, where they burst to form a frothy solution.

• PROTEIN SKIMMER Mini vortex skims and removes dissolved wastes from marine aquariums
• POWERFUL & EFFICIENT Turbo-Venturi Injector System with Maxi-Jet 1200 pump form protein-laden bubbles
• VERSATILE INSTALLATION External hang-on or in-sump installation
• CAPACITY Works with any marine aquarium up to 100 gallons

User questions & answers

Question:	Does this skimmer come with a pump
Answer:	Yes. comes with a power head and is ready to go out of the box
Question:	is this item loud its going in a bed room
Answer:	yes it will be loud in bed room you should leave it living room
Question:	Does this run on 220v
Answer:	No
Question:	this hangs on the back of a tank
Answer:	Yes. You need about four inches of clearance (the width/depth of the skimmer) behind the tank. Mine is the 150, but I think the only difference between the 100 and the 150 is the length of the tube, not the width/depth of the skimmer. I had to get a replacement because I fried the pump impeller, but both systems have worked well and have not leaked.

Product features

Instant Ocean SeaClone Protein Skimmer, External Hang-On or In-Sump

SeaClone exclusive Turbo-Venturi Injector System mixes filtered water and air in the pump impeller chamber, creating a froth of micro-bubbles for maximum skimming efficiency and improved gas exchange. Air and water swirl together in the Vortex Reaction Chamber, creating a powerful "tornado" effect that rapidly draws dissolved wastes from aquarium water.

• Protein skimmer that mixes filtered water and air in the pump impeller chamber, creating a froth of micro-bubbles for maximum skimming efficiency and improved gas exchange
• Spiraling air/water mixture propels protein-laden bubbles upward, where they burst to form a frothy solution
• Dissolved organic compounds are trapped and contained in the high-capacity collection chamber

Product description

NYOS QUANTUM 120 NYOS Quantum - Built to perform Extreme performance. Very smooth operation. Low power consumption. Easy to maintain. NYOS Quantum : The impressive outcome Four things are characteristic for the NYOS Quantum skimmer: First: Extreme performance Performance, performance and once again performance. NYOS Quantum is characterised by high skimming performance as a result of the large amount of air in combination with and optimum air-water mixture. Second: Very smooth operation Aquariums should be seen and not heard. That is NYOS Quantum is especially silent when running and therefore can hardly be heard. Third: Low power consumption NYOS Quantum is conceived to be especially energy efficient and uses a minimum of power, despite its huge performance. Fourth: Easy to maintain Consistently strong skimming and simple settings are a joy. For this reason, NYOS Quantum is especially easy to maintain and provides the same consistent level of performance over a long period of time. Reliable pump starts are a matter of course. NYOS Quantum : The innovative input These are the innovative features of the NYOS Quantum skimmer: 1. The new NYOS Hybrid Wheel 2. NYOS Clear-View Reactor 3. The NYOS Twister 4. Combination of form and function: the Sinus design 5. Precision and details 6. Optimised, variable setting options 7. Compact construction yet can be dismantled completely Technical Details Pump:Quantum 1.0 Air max.:500 l/h Power:8 W Dimensions (LxWxH):15 x 21 x 46.5 cm Tank Size:100-500 Liter

User questions & answers

Question:	Is this item returnable
Answer:	Not sure
Question:	Which nyos quantum do I need for a 125 gallon mixed reef
Answer:	I think this 120 model should be just fine for medium stocked or less. If you like to really load the tank heavy with coral and fish you might go up the 160.
Question:	How high does the water level need to be in the sump
Answer:	Manual says 22 cm
Question:	The mother broke on mine where can I get a replacement
Answer:	If you break your "Mother" you should fix the relationship and not just go willy-nilly and buy a new one...

• The IOAOI protein skimmer is equipped with an LED controller. The operation and the status could been seen easily. The water flow of the pump could be adjusted as required. And there are 20 gears, the power consumption of which is from 4W to 23W.
• Patented needle shaped diversion plate helps to generate much richer bubbles. Better reaction. And it could prevent the bubbles/foam from returning, and could also provide long contact time between water and air, which makes the protein skimmer obtain better performance.
• 23W pinwheel DC water pump adopts advanced frequency conversion technology, high efficiency and energy saving. Ultra quiet. Multi-gear adjustment.
• Constructed of high-quality cast acrylic to guarantee long life. For in sump use only.
• Foot Print/Height: 9*6.9/20 in. Recommended sump water depth: 7" to 9".

User questions & answers

Question:	Are there any instructions on this thing? Need to know what the buttons on controller do
Answer:	It will do fine for your 30 gallon now. But this skimmer is only rated for 65 gallons max, and probably not even that. Manufacturers almost always overrate their skimmers.
Question:	Hello i have a 90 gallon reef tank, i plan on having heavy load in future. do i need 150 or 180? thanks
Answer:	5x7.5"
Question:	Hi, i did not receive a operation instructions with my skimmer, could i get some information on how to make it work correctly
Answer:	Yes....it will do great...you got to keep it in 7" of water in the sump.
Question:	I purchased a 150 before I bought my tank was able to get a larger tank a 180 gal. will the 150 handle that load or do I need to change to the larger
Answer:	the foot print is 4.25" x 7" x 17" High

Product features

Note please

Most of the protein skimmers are equipped with alternating current "AC" pumps (the type of power that comes out of your wall outlet). The IOAOI Direct current “DC” pumps have several key advantages over traditional AC pumps. Most notably, you can adjust the rotational speed of the motor which controls the air and water flow rates into the skimmer as required. And it converts alternating current to 24V direct current, which would be safe to you and your marine organisms.

• The IOAOI protein skimmer is equipped with an LED controller. The operation and the status could been seen easily. The water flow of the pump could be adjusted as required. And there are 20 gears, the power consumption of which is from 19W to 38W.
• Patented needle shaped diversion plate helps to generate much richer bubbles. Better reaction. And it could prevent the bubbles/foam from returning, and could also provide long contact time between water and air, which makes the protein skimmer obtain better performance.
• 38W pinwheel DC water pump adopts advanced frequency conversion technology, high efficiency and energy saving. Ultra quiet. Multi-gear adjustment.
• Constructed of high-quality cast acrylic to guarantee long life. For in sump use only.
• Foot Print/Height: 11.8*8.8/21.5 in. Recommended sump water depth: 7" to 9".

User questions & answers

Question:	How is this skimmer working out? also is this skimmer dead sil is this skimmer dead silent...meaning no humming or anything
Answer:	It’s amazing, and it’s dead silent
Question:	What puump would i use to replace a broken one
Answer:	Bubble magus 600 or stronger. Hope that helps.
Question:	Why is bigger skimmer more money or is this an error
Answer:	Hi there, thank you for your interest. It's bigger so it's equipped with a larger pump for better reaction. And it needs more acrylic raw materials. It's bigger so it costs more sea freight and final delivery fee. The bigger one overall costs more so it needs more money. Thanks.
Question:	How big is the cup
Answer:	I have the BIG one and the cup is about 4 inches tall and 7 inches across

Product features

Note please

Most of the protein skimmers are equipped with alternating current "AC" pumps (the type of power that comes out of your wall outlet). The IOAOI Direct current “DC” pumps have several key advantages over traditional AC pumps. Most notably, you can adjust the rotational speed of the motor which controls the air and water flow rates into the skimmer as required. And it converts alternating current to 24V direct current, which would be safe to you and your marine organisms.

• This IOAOI protein skimmer is perfect for big aquariums filtering. The skimmer body is small and it doesn’t take up too much space in sump. But the pinwheel pump will generate enough bubble to make your tank crystal clear.
• Cone shaped diversion plate helps to generate much richer bubbles. Better reaction. And it could prevent the bubbles/foam from returning, and could also provide long contact time between water and air, which makes the protein skimmer obtain better performance.
• 15W pinwheel AC water pump adopts advanced technology, high efficiency and energy saving. Ultra quiet.
• Constructed of high-quality cast acrylic to guarantee long life. The cup can be easily removed for cleaning.
• Foot Print/Height: 6.3*5.5/18.1 in. Recommended sump water depth: 7" to 9". Make sure the pump is fully submerged. For in sump use only.

User questions & answers

Question:	Do you have to have a sump for this protein skimmer
Answer:	Unless your sump is super deep, you shouldn't need a stand, but if you do there are several premade ones from Precision Marine and Icecap that are inexpensive. Or you could build one out of acrylic, or even egg crate pretty easily.
Question:	Skimmer is showing error whrn i try and turn it up
Answer:	Yes, it’s digital with F1 to F9 as it’s power range. Good skimmer with only issue being mineral deposits jamming the pump after a year.. little vinegar and the pump is 100%
Question:	I am getting excess micro bubbles exiting the skimmer housing and ending up in my sump return line, any suggestions to remedy this
Answer:	It states up to 12 watts so that is .1 amps
Question:	I am very impressed with the amount bubbles being produced, but there seems to be a significant amount of wate in the top container, is this normal
Answer:	Product details Product Dimensions: 6.7 x 6.3 x 18.5 inches Shipping Weight: 5.8 pounds (View shipping rates and policies) ASIN: B0178HW8D4 ** If you scroll down to the description area, it says the dimensions. You'll have 1.5" to spare for your 20" height.

Product features

Cone shaped diversion plate is designed to produce denser bubbles and prevent from flowing backwards.

The IOAOI protein skimmer is equipped with a cone shaped diversion plate in the chamber, which differs from most of the skimmers. This special design can push the water from the bottom to the cone chamber faster, which could produce more bubbles than traditional ones. Much denser and longer time contact. And therefore it generates outstanding performance.

Needle impeller AC pump

The pump uses standard positive rotating wave technology, ultra quiet while working. It adopts advanced frequency conversion technology, high efficiency and energy saving. Protection function of blockage. High-voltage and low-voltage protection. Water separation protection. Overload protection.

Product description

Fed up with those greasy soup, let your body fall into obesity?

Have you been tired of using a large serving spoon to skim jams and soup broths carefully?

Want to enjoying Hot Pot but the grease and foam that floating on the top make you lose your appetite.



TEMCHY skimmer is an absolutely necessary tool for anyone who loves to cook and to eat healthy.



Made from 304 18/8 high grade durable stainless steel with ergonomic handle, Durable and no rust, no breakage, no wear after multiple uses and washing.

Fast, easy and complete separation of the floating fat from broths, soups and stews, it makes the clearest broth.

Filter mesh is fine enough to pick up the smallest fat partides, remove thousands of calories from your food in seconds.

SIZE : 9 inches length(including the handle) + 4 inches diameter mesh, the TEMCHY fat skimmer is small but perfect fit for most pots and pans.

EASY TO CLEAN: Dishwasher safe; Hand Wash: simply wash with warm water and soap to reuse.



We love our customers and are obsessed with your satisfaction!

CLICK "Add To Cart" NOW, TEMCHY fine mesh skimmer was a fantastic buy and well-worth it!

• NO MORE FOAM & SCUM: The fat skimmer is made from 304 18/8 food grade stainless steel with ergonomic handle for fast, easy and complete separation of the floating fat, grease, foam or scum from your favorite broths, soups and stews.
• INNOVATIVE DESIGN : TEMCHY fine mesh skimmer, the filter mesh and handle are firmly attached, filter mesh is fine enough to pick up the smallest fat partides. A hole in Heat-Resistant Round handle allows for easy storage.
• WORK GREAT : Skimming grease from soup, stock, and gravy; Scooping up the bits of panko breadcrumbs when deep frying; DE-greasing breakfast sausages after boiling and frying; Taking out vegetables from water without using a colander etc.
• PRACTICAL SIZE : 9 inches length(including the handle) + 4 inches diameter mesh, the Letrue skimmer is small but perfect fit for most pots and pans. EASY TO CLEAN: Dishwasher safe, simply wash with warm water and soap to reuse.
• Great Value : Excellent gift for your kitchen; Your Satisfaction is our TOP Priority! If You're not completely satisfied, please feel free to contact us and we'll make it right.

User questions & answers

Question:	Is this strainer rust free
Answer:	I don’t own a fry daddy, but my daughter does. This fits nicely. Am happy I purchased this strainer.
Question:	Where is this made? Is there a bigger size
Answer:	Overall length is 15 1/2". The handle alone is 10". Hope this helps.
Question:	Does this work for deep fryers
Answer:	I am not sure if it NSF certified, but most likely not. It is 100% Solid Stainless Steel and works very well. I keep mine in the garage and it has never shown any signs of rust or descoloring. If you have to have one that is NSF certified you may want to go to a restaurant supply store and pay ten times as much.
Question:	How many microns is the mesh
Answer:	Love that answer” not marked” yes it’s not marked but its plastic bag says in big letters “ made in China,” had I known this would not have ordered however its well made beyond it’s made in China signature!

Product description

Hayward automatic skimmers have been an industry standard for more than 30 years. The Dyna-Skim skimmers have been redesigned to match the needs of today’s above ground pools, while remaining applicable for use on existing pool models.

• Large debris collection basket
• Heavy duty UV resident ABS construction
• Top and front basket access
• Snap-in and removable weir
• Compatible with wide top seat pools

User questions & answers

Question:	Do i need a wide mouth are what
Answer:	Not sure, but it doesn't look like it.... looks more like some kind of cut lava rock or something..... Probably man made...
Question:	I measured our skimmer and inside opening is 12 by 5 1/2, outside it is 13 3/4 by 71/2, 18 screws. Would this fit
Answer:	about 5/8"...I've given up on all AirStones...they clog up, so I just put the ends of my hoses where i want them & get better, more continuous bubbles.
Question:	I think my current skimmer is an Aqua Leader ALS-500_525. The housing has cracked so I need to replace it. Will this one fit
Answer:	The stones I recieved were a dark blue. Darker than the typical stones or bubble wands I've seen.
Question:	What size is the opening on the inside? Just need to replace the part that holds basket if I can get away with it
Answer:	No sorry, i would guess pore size would be like 100 grit sandpaper. 1mm bubble size.

Product features

About Us

Our objective is to make your pool experience worry and hassle-free. That's why our equipment is engineered to work smart at keeping your pool sparkling clean and trouble free.

For over 80-years, we've been helping pool owners enjoy the pleasures of pool ownership by manufacturing cutting edge, technologically advanced pool equipment worldwide.

Our products include a complete line of technologically advanced pumps, filters, heaters, heat pumps, automatic pool cleaners, lighting, controls and salt chlorine generators-high-quality components engineered to work together.

Product description

Keep your pool clear of leaves & debris all summer long with the Index deluxe wall Mount surface Skimmer routes surface water through the strainer basket on its way to the filter pump, automatically catching leaves & other debris before they sink to the bottom of the pool!

• Intex Deluxe Wall Mount Surface Skimmer
• Help catch leaves and debris before they sink to the bottom of the pool with the Intex Deluxe Wall Mount Surface Skimmer.
• The skimmer easily mounts to Easy Set or metal frame pool sidewalls with an adjustable bracket and attaches to the filter pump for automatic skimming.
• The Durable polypropylene plastic is not affected by pool chemicals and the strainer basket pulls out for easy cleaning.
• Requires an Intex filter pump with a minimum flow rate of 800 gph (3,028 L/hr).

User questions & answers

Question:	difference between the 2-pack and 4-pack
Answer:	You 2 or 4
Question:	What is the diameter of the end that screws to the wall of the pool
Answer:	3/4 to 21/4
Question:	Any more suggestions on how to make the flow better from skimmer? It keeps shutting down pump or very little water in pump
Answer:	Lower it
Question:	what drain fitting will this screw on to
Answer:	It doesn’t screw into anything it slides into and you clamp it hook it to the intake from pump mine works great