12 best pool vacuum robots

• Hello, free time! Let the Nautilus CC Plus take over your pool cleaning duties for good. Ideal for swimming pools up to 50 feet, this cleaner will leave your pool sparkling clean in just 2 hours. Spend more time enjoying your pool and less time cleaning.
• The clean you need without the hassle. The Nautilus CC Plus was designed to clean your pool, effortlessly. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean.
• Ditch the pumps and hose. Unlike the energy hogs that are pressure and suction cleaners, Dolphins are independent cleaning machines and do not rely on any additional equipment to get the job done. Save energy with every pool cleaning.
• Clean your pool with the touch of a button. Schedule the Nautilus CC Plus to clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier!
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	Does it clean and clime walls and steps
Answer:	Ours cleans all but top step of granite-look composite steps, 4x8. Gets stuck for 30 sec., tops, then blasts away & backs-up. Also does vertical waterline of vinyl pool beautifully & climbs walls. Never a dirty pool; we change & wash filters each use, 2 uses if not very dirty. We usually use 2 hr. cycle daily & store it on stand, covered. Pool gets cleaner & cleaner. CRYSTAL clear water at night in light. So happy.
Question:	how many volts
Answer:	The Dolphin has a power pack with free universal voltage of 100 - 240v. It can be used worldwide. Thanks.
Question:	Is this cleaner OK to use in either salt water pools and chlorine? I'm thinking of converting my chlorine pool to salt water next year
Answer:	Yes. It’ll work in either. “Salt Water” pools are chlorine pools. You add salt and stabilizer and the chlorinater turns it into chlorine. It’s just a lot less chlorine. My pool is this type.
Question:	where does the filtered water exit? top or rear? i had a cleaner with a rear exit and it kept disturbing debris on the pool so it never got it very cl
Answer:	The water is pulled through the bottom as it vacuums. The debris and water is filtered though 4 sizable filters. The resulting filtered water is then expelled through the top of the device. This device is a bulldog and cleans dirt, dead algae and leaves from your pool in one round. If the whole bottom is covered in leaves, you need to do your best to get them up and finish off with the Dolphin. This device saves me from vacuuming by hand for half the day. Also, the dirt, dead algae and general crud doesn't go through your pool filter. It completely removes it all without the risk of it going right back in and it doesn't stir up the bottom and settle back down after you vacuum. Come back a few hours later and it's still clean.

Product features

Goodbye, Debris!

The Nautilus CC Plus has superior filtering capabilities. It traps and locks-in all sorts of dirt and debris, so your pool is left exceptionally clean.

Effortless Cleaning

Tangle-free cable allows the Nautilus CC Plus to move freely around the pool with ease.

A Clean for Every Pool

Nautilus CC Plus is perfect for all pool types. From gunite to tile, and everything in between; you name it, and Dolphin will clean it.

Nautilus CC Plus Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 60 ft. Tangle-free cable

Suction Rate: 4500 GPH

Robot Weight: 19 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

• Sit back and relax while the Nautilus CC cleans the pool for you. Ideal for small pools up to 33 feet, this compact cleaner will have your pool ready for splashing fun in just 2 hours
• Efficiency is key when it comes to pool cleaning. Unlike suction and pressure cleaners, Dolphins are 8 times more energy efficient and do not rely on your pool pump or filter to get the job done. Ditch the pumps and hose and save energy with every pool cleaning
• Dolphin does all the hard work for you. Agile and efficient, the Nautilus CC was designed to clean your pool, effortlessly. With superior scrubbing and filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean
• Clean your pool with the touch of a button. Schedule the Nautilus CC to automatically clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends

User questions & answers

Question:	Is this all set to use when you get it
Answer:	yes, plug it in and turn it on. it works great! I haven't messed with the schedule set up yet but it states you can pick days and it will auto clean
Question:	Can you use the ultra fine filters on this model? I notice it is standard on the Triton model, but it looks like the same configuration as this model
Answer:	Hello, Yes you can use the ultra fine filters with this unit, you just have to buy it since it does not come with it
Question:	How does this unit compare to the tigershark
Answer:	I had a Tigershark and the basket was a pain in the butt to clean. It also would let a lot of debri back in the pool when you pulled it out. I also had the motor go out and then the next year it stopped working. It came out when everyone else was using cloth bags to catch debri. At that time the Tiger Shark was the king but there are better designed models out there unless Hayward re-designed the unit.
Question:	will this work on a pool with 20,000 gallons capacity
Answer:	Yes. My pool holds 20,000 gallons and this machine works perfectly. A true timesaver.

Product features

Sucks Debris. Not Energy

With an average operating cost of 5 cents per hour, you don’t have to sacrifice a high energy bill for a clean pool.

Compact and Nimble

This robot climbs and cleans the walls with ease. It’s versatile and works on any pool surface type- gunite, tile, plaster, and everything in between.

Always Easy to Handle

The quick water release helps keep the Nautilus CC lightweight and easy to remove from the pool.

Nautilus CC Packaging List

Ideal Pool Length: Up to 33 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 50 ft.

Suction Rate: 4000 GPH

Robot Weight: 13.8 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to set the weekly timer

When the power supply is switched on, you can press the weekly timer button to select one of the following cleaning schedules for the week ahead: One click: The robot will automatically work every day for a full cycle. This cycle will have the robot clean seven times in a week. Two clicks: The robot will automatically work every other day for a full cycle; that is four times in a week. Three clicks: The robot will automatically work every three days; that is three times in a week. A fourth click will cancel the cleaning schedule program. After selecting one of the schedule options, the robot will start to operate at the next occurrence of the programed start time. If the robot is working in the weekly timer mode, the weekly timer button will constantly blink between cycles. At the end of the week, the power supply will automatically switch off and you will need to reschedule the robot.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to clean the filters

Cleaning the filters are simple. Just remove the filter(s) from the robot, release the latch to let the dirt and debris fall out, and then hose off any remaining debris. Do not let the filters dry out before cleaning them. Clogged filters reduce the effectiveness of the cleaning. We suggest cleaning your filters every two months. Bag filters can be washed in the washing machine at 30 degrees, using a synthetic wash cycle, and allow to air dry. Cartridge filters can be clean in the dishwasher at 30 degrees. Although the filters may look clean, small particles may dry into the filter material and clog the filters.

• 【Convenient Robotic Pool Cleaner】PAXCESS cordless automatic pool cleaner is the most innovative pool robot cleaner for Max.100㎡ inground pools/above ground pools. Put aside the restraint of the power cord, our cordless pool cleaner robot is equipped with 5000mah lithium-ion battery, which can achieve up to 60-90 minutes of work, it can operate without a cable attached to an electrical outlet, allowing greater mobility. IPX8 waterproof design for battery, please be assured to use it.
• 【Super Cleaning Performance】With deflector and powerful motor, this automatic pool cleaner with a fast-moving speed(appr.16m/min) and powerful cleaning ability, high frequency, fast speed, deep cleaning, saving time and effort. With two large suction doors, one bottom brush and superior filter, robotic pool cleaner can trap and lock in leaves, dirt, and sand, leaving your pool water sparkling clean. PAXCESS pool robot cleaner takes over your pool cleaning duties for good.
• 【How to let pool cleaner go ashore?】With advanced battery detection technology, paxcess cordless automatic pool cleaner will stop alongside the swimming pool shore when the battery drained out or completing the working cycle by itself. And you just need to pull up the floating handle to let the pool cleaners go ashore. Simply plug the robot pool cleaner into any 110v outlet to recharge for the next cleaning. Need about 4-6 hours for full charging.
• 【LIGHTWEIGHT&EASY TO CLEAN】 It’s equipped with a floating handle that can follow the movement of the robotic pool cleaner. Only 12.1lb, so it is very easy for elders or women to take the pool cleaner out of the pool. The cordless pool cleaner although can't climb the wall, but it can climb on max.15° pool slope.PAXCESS robotic pool cleaner are safe for all pool types , such as concrete , fiberglass and vinyl liner pools.
• 【Energy-Saving Pool Cleaner.】: No Installation&Hoses, No Booster Pump&Suction Lines,robotic pool cleaner requires minimal maintenance, do not rely on any additional equipment to get the job done.There are 2 wide suction doors, water flows out through the open nozzle to thrust the pool cleaner to move forward, you can adjust the nozzle by turning it to control the moving route to efficiently clean pool's floor. We provide 24-month warranty, pls contact us if you have any problems.

Product features

Economical and Convenient Cordless Pool Cleaner in the Market!

• PAXCESS Automatic Pool Cleaner Allows Greater Cleaning Mobility.

• It does a great job on all surfaces and vacuums up dirt, debris and leaves.
• Super lightweight Pool Cleaner for women and the elderly to pick it up.
• Provide healthier clean for your swimming pool by reducing the amount of chemicals needed.
• Good gift for the loved in this Summer !

Smart Navigation

• PAXCESS robotic pool cleaner pre-installed the intelligent navigation system,delivers highly optimized scanning and coverage for a new level of clean.

5000mAh-Large Capacity Battery

• The rechargeable automatic pool cleaner is powered by a 5000mAh large capacity lithium-ion battery that enables the cleaner to deliver constant performance up to 60-90 minutes cordless use to clean your pool.

IPX8 Waterproof Grade

• IPX8 waterproof design allows you to be assured of using the cordless automatic pool cleaner.

Easy Switch Knob

• Easy operation, put the cordless automatic pool cleaner into the water surface, then turn on the switch knob, the robotic pool cleaner will power on and the indicator light is steady blue. The pool cleaner will begin to work after the blue light flashes about 15s.

Superior Filtering Capabilities

• The cordless automatic pool cleaner has built-in fine reusable filter tray whose filtration precision up to 180 um, can trap dirt and fine debris while also cleaning and circulating the water- leaving your pool sparkling clean.

New Updated

• We add a charging port protector for every paxcess cordless pool robot cleaner. Charging port will not rust easily any more.
• Turn off the switch knob and check the charging port whether clean and dry before charging.

Product features

• How to Clean your Cordless Pool Cleaner?
• Easily steps to clean the filters - simply open the top cover of the robotic pool cleaner upward, take off the filter tray, then rinse them with a garden hose. PAXCESS provides pool owners with a hassle-free cleaning solution.

QA:

1. 1.Q:Why my cordless automatic pool cleaner wouldn’t sink to the bottom of the swimming pool quickly?

• A:Please don't worry, it is necessary to stay on the surface for 15-25 seconds until water flows out from the cleaner nozzles to the swimming pool before sinking to the bottom of the swimming pool.

1. 2. Q:Should I turn on the robotic pool cleaner before put it into the pool?

• A: Please pay more attention to this problem. Please remember that you should put the robot pool cleaner into the water before power it on, which can protect the wheels and the motors and extend their life.

1. 3.Q: Could I turn on the cordless automatic pool cleaner when charging?

• A:No, you can’t. Please turn off the pool cleaner and clean its charging ports before charging.

1. 4.Q: How to put the robotic pool cleaner into the pool?

• A:Put into or lift out from the pool with the cleaner bottom toward the wall to avoid any possible scratch to the pool wall.

User questions & answers

Question:	Is it best to leave robot in the pool when not in use
Answer:	no because it should not be in pool when people are, especially if it is on. very dangerous.
Question:	Does it clean walls
Answer:	Mine climbs the walls all the way up. It cleans the cove at the bottom as well. I love this machine. It has totally cleaned my pool of all debris. I highly recommend it for above ground pools.
Question:	I have a ladder going into my pool. Won't this cord get tangled on the ladder
Answer:	Yes. If it fits behind your ladder, it will absolutely get tangled. Has happened many times. I am thinking of attaching a cross-bar that runs from the ladder to the pool wall to stop the robot from going behind.
Question:	Will it clean a 30’ round pool
Answer:	My pool is 15 x 30 and it cleans it pretty well. It may miss a spot here and there but this product is so worth the money.

Product features

No Extra Stuff Needed

No booster pump. No extra hoses. No installation. Just plug it in, drop it in, and walk away for a clean pool.

Lets all the Water Out. Fast.

The quick water release makes it easy to remove from the pool. Don’t worry, it only lets the water out and not the stuff trapped in the basket.

Goodbye, Dirt and Debris!

The E10 traps and locks-in all sorts of debris so your pool is left exceptionally clean.

E10 Packaging List

Ideal Pool Length: Above ground pools up to 30 ft.

Cleaning Coverage: Floor only

Cleaning Cycle Time: 1.5 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off

Cable Length: 40 ft.

Suction Rate: 4000 GPH

Robot Weight: 13.8 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Product description

The Zodiac MX6 is a compact yet powerful, ultra-efficient, suction side pool cleaner that features best in class vacuum power and programmed navigation for a totally clean pool without all the hassle. With an innovative low-flow design, it consumes less energy than any cleaner in its class, making it ideal for pools with 2-speed and variable speed pumps. The MX6 also incorporates cyclonic suction for powerful vacuuming and an articulating turbine blade for aggressive wall-climbing. Swiveling hoses are quick-connect style for easy assembly and a flow regulator controls the water flow so there is nothing to adjust at the skimmer. Includes 8. 4m of hose and is backed by a 1 year .Cleaner Type : suction cleaning robot

• Innovative low-flow design makes it ideal for pools with 2-speed or variable speed pumps
• Cyclonic suction for powerful vacuuming and articulating turbine blade for aggressive wall-climbing
• Swiveling hoses are quick-connect style for easy assembly
• Includes automatic Weir Valve, 90° Twist Lock Elbow, 7 x 1.2m Twist Lock Hose Lengths, Flow Regulator Valve, Hose Float, Hose Protector, Warranty Card.

User questions & answers

Question:	Does it fit any pool
Answer:	This product works in both in-ground and above ground pools, and is suitable for all pool surfaces, including concrete/gunite, vinyl, tile & fiberglass.
Question:	I have earth on the bootom of my pool. will it pick up material as fine as Earth
Answer:	i dont know what you mean by earth? it has a fan on the bottom of this unit that creates suction. it cleans the bottom and sides of my pool. long palm frans get stuck in the unit that you will need to remove.
Question:	Does this machine still have warranty
Answer:	It comes with a one year warranty.
Question:	I have a 1/2 horse power motor, will it work with that
Answer:	Put your vacuum hose in a 5 gal bucket of water. If your pump will suck that dry in 10 seconds, then this cleaner will work fine for you. If not, then I would avoid it.

• Drop and go. Easy to use, single button plug and play in-ground robotic pool cleaner ideal for pools up to 50 feet; backed by a 3 year quality assurance.
• CleverClean delivers a smart and efficient clean using advanced algorithms for complete pool coverage. Anti-tangle patented swivel cable allows your Dolphin to move around your pool with ease.
• Powerful, dual scrubbing brushes forcefully attack tough dirt and debris leaving your swimming pool floor, walls and waterline exceptionally clean in 3 hours.
• Multiple filter options for an optimal clean pool. The Premier comes standard with three filter options: bottom-load fine cartridge filters, ultra-fine cartridge filters, and an oversized fine filter bag.
• Cleaning made convenient. Set the Premier’s weekly scheduler to automatically clean for you- every day, every other day, or every 3rd day. The full filter indicator lets you know when it’s time to clean your filter.

User questions & answers

Question:	Does it come with a caddy and remote
Answer:	This listing is only for the unit. The Caddy and Remote are purchased separately!
Question:	Does this clean the seating ledge and steps
Answer:	the wheels need to be submersed in water as they act like a ballast. the machine sinks back down when the water drains from the wheels. This is good so the machine doesn't climb out of the pool. if your ledge & seating area are shallow, 24 inches, then no, the machine will not clean those parts. we use a pool brush to get the shallow bits before we activate the dolphin. we have pebbletech & the scrubbers do a fantastic job of cleaning
Question:	How do I choose between the bag vs the filter for my pool
Answer:	When you buy the premier both bag and filter comes with the purchase. Both of them I use. If you have a. Lot of debris and leaves use the bag, then the next day filter. Its took me a month to research all the robotics pool cleaner and i like the performance of this one. Worth the price with 3yrs warranty. Leo
Question:	Anyone know if this will get stuck on raised drains on bottom of pool
Answer:	Yes, it rarely gets stuck on our drain, maybe once every 10 cleanings. However, Maytronics provides a free outlet flow diverter attachment (I had to call to request) that gives the cleaner a little more forward push. It is definitely an improvement, although not perfect, now it gets stuck maybe once every 20 cleanings.

Product features

One Robot. Four Media Types.

Includes three media types: micro-cartridges, standard cartridges and oversized leaf/debris bag. Multi-Media is a Premier Exclusive. Disposable debris bags are available.

Scrubs Floor, Wall, & Tile/Waterline

In a radical departure from ordinary cleaners, Premier was designed to clean all pool surfaces including the tile and waterline with pinpoint precision.

Ultra-Efficient Twin DC Motors

Dual 24 volt DC motors and dual scrubbing brushes clean every square inch. Premier operates on 90% less energy than old-fashioned suction and pressure cleaners.

Complete Pool Coverage

Smart Nav software delivers highly optimized scanning and coverage for a new level of clean. Advanced algorithms clean 100% of the pool floor, wall & tile/waterline and pool floor.

Advanced Weekly Control

Some robots must be turned on manually each day. Smart control weekly timer works automatically at the desired interval. LED full indicator light alerts when it's time to empty.

No Tangle. No Hassle.

Anti-Tangle patented swivel technology provides uninterrupted hassle-free cleaning. One of the greatest engineering accomplishments in the pool robot industry.

• Delivers unmatched performance in an above-ground cleaner at an unthinkable cost.
• No messy bags! Large and in charge oversized debris cartridge holds up to 60% more debris
• Hypergrip Continuous Tracks - leaves wheels cleaners in its wake!
• Hyperbrush Dual Scrubbing Brushes scrubs away difficult to remove contaminants.
• SmartNav 2.0 Robotic Scanning. Only 14 lbs. Energy Efficient 24 Volt DC motors. One year warranty.

User questions & answers

Question:	What is the return policy if we are not satisfied
Answer:	Have taken out extra 3 year warranty, but it is one year otherwise.
Question:	Can you plug the power box into a heavy duty extension cord? My power supply is 12 ft from the pool and i have a 27ft above ground round pool
Answer:	As long as the extension cord, and the plug to the power supply are covered, and do not get wet, it will work!
Question:	Where can i purchase the fine partical filter
Answer:	Amazon is a great place to look.
Question:	Can this be used for in ground pool too
Answer:	Absolutely, this cleaner can!

Product features

The New Benchmark

Take whatever preconceived notions you may have about pool robots and throw them out. The all-new Escape is here with groundbreaking technology to ensure that your pool is cleaned to a whole new level.

Onboard DC Motors

Escape’s low voltage DC motors operate on nearly 90% less power than old fashioned cleaners. While other pool cleaners can expend a massive 1800 watts of power, the Escape robot requires just 180 watts which is just 5 cents per hour.

Active Scrubbing Brush

For most pools, vacuuming isn’t enough to remove algae and other stubborn build-ups attached to the pool’s floor. That’s why engineers equipped the Escape with the active scrubbing brush to deliver a new level of clean.

Continuous Tracks

Water between the wheels & pool surface results in slippage and lost efficiency. Escape takes a radical departure from the conventional wheel with continuous rubber tracks. No more slipping. No more wasted energy.

Massive Top-Load Filter

For a complete clean, your robot needs filtration that can handle debris of all size. Escape’s massive filter cartridge is easily accessed from the top. Messy, cumbersome debris bags used by traditional pool cleaners are a thing of the past.

Smart Navigation

Gone are the days of watching your robot aimlessly wander. Smart navigation and scanning software uses advanced algorithms to efficiently clean your pool. Escape’s ability to sense walls, ladders and drains delivers uninterrupted cleaning.

• Triple threat cleaning action. Equipped with powerful motors, three scrubbing brushes, and superior filtering capabilities, the easy to use Dolphin Nautilus CC Supreme robotic vacuum cleaner pushes the limits of swimming pool cleaning. This next level robot masterfully cleans the floor, walls, and waterline for a stunningly clean pool.
• Interactive pool cleaning. This premium cleaner is WiFi connected so you can set advanced cleaning schedules, choose between cleaning cycles, delay start, and spot clean using the MyDolphin Plus App on your phone. Whether you’re in the backyard or at the office, make your pool perfect from anywhere, any time.
• From an impromptu pool party to the calm after a storm, the Nautilus CC Supreme has you covered. Choose between the quick clean, focusing on the floor only, the standard cleaning for floor, walls, and waterline, or the enhanced clean for extra scrubbing time.
• Plug and play for an uncompromised clean. Since this cleaner works independently from your pool’s system, you don’t have to worry about external factors such as low pressure or a damaged pump impacting the cleaning performance. With an average operating cost of 5 cents per hour, save energy with every pool cleaning.
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	What filters do i have to buy for this model? are the filters the same for the nautilus cc plus
Answer:	You receive two types of filters when you purchase. There are 4 filters in the box withe the unit as it requires 2 to run. I dont know if they are the same as the plus as it only has two brushes and the supreme has 3 so the housing may be different
Question:	Does it clean corners well (ex: use features like water jets to loosen debris
Answer:	It does for me
Question:	I have an older rectangular pool with square walls . Will it climb the 90 degree walls with no sloping transition
Answer:	Yes
Question:	What features does this cleaner have that make it a top of the line model
Answer:	Like the other person who answered stated, it has 3 brushes. It also comes with two different kinds of filters, a mesh type for general use and a finer particulate filter for sand/silt/algae, etc. Beyond that, this model has WiFi, and you use an app on your phone to control the robot and set up scheduling as well as tell it to start a clean and what kind of clean-up you want it to do (regular, fast cleaning, walls only, floor only, extra-clean). We have had 3 Dolphin robots over the years and two Nautilus: the Supreme and the standard nautilus cc. The Supreme (the one you're asking about) does water edge cleaning, and the other nautilus robots do not. Think of it like the "roomba" of the pool robot world... There are plenty of robot vacuums out there, but like a roomba this one actually has alot of "smart" features that you can't find in the lower-tier models.
Question:	How long is the warranty and what does it include
Answer:	What is E year for 2 other models?
Question:	Does this have a swivel cord to prevent tangling while cleaning
Answer:	The cord is on top of the machine and has a float to prevent tangling. I have never had the cord tangle during several dozen uses.
Question:	Hola este limpiador sirve para piscina de agua salada
Answer:	Hola, no sabría. La mía es de agua dulce y funciona bien. Saludos.
Question:	can dolphins be used in vinyl inground pool
Answer:	Yes. That's what I have. Drop it in, turn it on, come back 3 hours later to a clean pool.

Product features

Let Dolphin take over your pool cleaning duties

The Proteus DX3 is equipped with a weekly scheduler so you can set it to automatically clean each week using 3 settings-every day, every other day, or every 3rd day.

Clean your pool with the touch of a button

Ideal for swimming pools up to 33 feet, the ProteusDX3 will leave your pool clean in a quick 2 hours. Spend more time enjoying your pool and less time cleaning.

Ditch the pumps and hose

Unlike the energy hogs that are pressure and suction cleaners,Dolphins are plug-and-play and do not rely on any additional equipment to clean your pool. Not only will you see energy savings with a Dolphin, but you will also help extend the life of your pool's system.

The simple way to a clean pool

Agile and efficient, the Proteus DX3 effortlessly scrubs your pool’s floor and walls and captures and filters out unwanted debris.You can relax knowing your pool is left exceptionally clean.

Nimble on the Walls

This robot climbs and cleans the walls, effortlessly. It’s versatile and works on any pool surface type: gunite, tile, plaster, and everything in between.

Lets All the Water Out. Fast.

The quick water release makes it easy to remove from the pool. Don’t worry, it only lets the water out and not the stuff trapped in the basket.

No Extra Stuff Needed

No booster pump. No extra hoses. No installation. Just plug it in, drop it in, and walk away for a clean pool.

Scrubs Like No Other

Equipped with a center scrubbing brush, this cleaner pushes the limits for wall and waterline cleaning.

No Extra Stuff Needed

No booster pump. No extra hoses. Just plug it in, drop it in, and walk away for the ultimate convenience in pool cleaning.

Control from Anywhere, Any Time

The Nautilus CC Supreme is Wi-Fi connected so you can use the MyDolphin Plus App for interactive cleaning to make your pool perfect, no matter where you are.

Nautilus CC Supreme Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor, walls, and waterline

Cleaning Cycle Time: Quick – 1.5 hours, Standard – 2.5 hours, Enhanced – 3.5 hours

Pool Surface Type: Cleans all pool surface types

Smart Phone Connectivity: Wi-Fi connectivity with the MyDolphin Plus Mobile App

MyDolphin Plus Mobile App Features: On/Off, Weekly Scheduler, Cycle Selector, Full Filter Indicator, Delay Start, Remote Steering

Cable Length: 60 ft. Tangle-free Cable

Suction Rate: 4500 GPH

Robot Weight: 24 lbs.

How to store/roll/operate cable

When your Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to decide which filters to use?

It is best to use the fine (screen mesh) filters early in the season or after a storm when your pool may have a lot of large debris. The fine filters will remove the larger rough debris such as sticks, twigs, and leaves. The ultra-fine (pleated, corrugated) filters will remove smaller dirt and debris that you can’t see. It is ideal to use these filters after your pool has had its initial cleaning for the season.

• Protect your Dolphin robotic pool cleaner when it’s not in use or during the off-season with the Dolphin universal caddy and classic caddy cover bundle. The universal caddy and classic cover are compatible with all residential Dolphin cleaners.
• Stress free storage. The universal caddy provides a proper storage solution and keeps the pressure off the scrubbing brushes, allowing them to maintain their form. It also provides a secure place to hold your power supply and keeps your cleaner’s cable organized and out of the way.
• Protect your investment. The classic caddy cover is sleek and designed to fit securely over your Dolphin’s caddy. This cover is made from a durable polyester fabric that is waterproof, dust proof, and wind and UV resistant, shielding your cleaner and power supply from the harsh elements when not in use or during the off-season.
• Universal caddy part number: 9996084-ASSY. Classic caddy cover part number: 9991794-R1
• Maytronics Certified Genuine Parts. Keep your Dolphin pool cleaner in its best condition.

User questions & answers

Question:	What is the seller's contact information? I would like to talk with them directly
Answer:	it works great with a transformer. I don't like batteries! too much trouble changing. So don't know ans to your question. sorry.
Question:	Does the Cayman model fit
Answer:	About 10 feet 180 degree wide.
Question:	Will this work for the Dolphin Nautilus basic model
Answer:	Hi, we have a limited 1 year warranty for our products. Thank you.
Question:	will this work for the dolphin triton. the one i got with mine was plastic and already broke, it was a piece of junk. is this metal
Answer:	Hi, we have a limited 1 year warranty for our products. Thank you.

Product features

Stress Free Storage

The Dolphin caddy makes it easy to transport and store your robot when not in use. It provides a secure place to hold the power supply, reduces pressure on the scrubbing brushes, allowing them to maintain their form, and keeps the cable organized.

Protect your Investment

The Classic Cover is waterproof, dust proof, and wind and UV resistant, shielding your cleaner and power supply from the harsh elements when not in use or during the off-season.

Compatible with all Dolphin Cleaners

This Premium Cover is made from a durable, heavy-duty polyester fabric. Its sleek design provides a secure fit for all residential Dolphin Caddy types.

How do I properly store my robot on the Dolphin Caddy?

After each cleaning cycle, take your robot out of the water and store it on your Dolphin Caddy, away from direct sunlight, excessive heat, or severe cold. Store the Dolphin Caddy in a covered location to prevent accelerated wear. Wrap the cable carefully so that it does not have any kinks and store on your Dolphin Caddy.

How do I set up the Power Supply Unit on my Dolphin Caddy?

When your robot is in use, make sure the Dolphin Caddy that is holding the Power Supply Unit is properly stored on the caddy at least 12 feet away from the edge of the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your robot from surges in power. Do not use an extension cord or surge protector to power your robot.

Is it safe to leave the Power Supply Unit on the Dolphin Caddy at all times? What happens if there is a thunderstorm?

The Power Supply Unit is an electrical device which must be protected from the elements. It is water resistant, but not waterproof. Mount your Power Supply Unit on the Dolphin Caddy for ease of use and to prevent accelerated wear. Always plug into a Ground Fault Interrupter (GFI) outlet. Do not allow the power supply to be submerged in the pool or standing water.

How do I properly store, roll, and operate the cable when using a Dolphin Caddy

When you robot is in use, completely remove the cable from the Dolphin Caddy. Release enough of the cable for your Dolphin to properly cover your pool and leave the excess cable loosely rolled outside of the pool. When storing your robot on the Dolphin Caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Product description

• Cyclonic Vacuum technology ensures the MX8 captures maximum debris whilst maintaining maximum cleaning power – connects directly to skimmer or dedicated 1.5” vacuum line
• X-Drive technology provides advanced dual navigation for best pool coverage with no hang ups. Thoroughly cleans floor, walls, and waterline of any size or shape pool.
• X-Trax tires provide extreme maneuverability and climbing performance, even in tight corners and on vertical walls
• Ultra-efficient power source provides maximum torque while operating at low flow, not burdening the pool system – compatible with variable-speed pumps
• Operates in all in-ground pools. Best choice for solar, 2-speed, and variable-speed pumps.Pool Surface(s)-Concrete, Tile, Vinyl and Fiberglass. The flow regulator valve is designed to consistently limit high flow of water through the cleaner. When flow is correct, the cleaner components are less susceptible to damage and the life of the cleaner can be extended. By checking for proper wheel rotation timing, you can verify the cleaner is operating at maximum efficiency

User questions & answers

Question:	I`m not seeing any scrubers on the bottom of this zodiac mx8 i think there is two models i need one with scrubers for gunite customer was no help
Answer:	The difference between the MX8 and the MX8 Elite suction-side pool cleaners is the scrubbing brushes and the turbines. Many customers love the scrubbing brushes offered on the latest model. Josh's response below has some validity in that you should consider your debris type before deciding which cleaner to purchase. Suction cleaners work best on pools with small to medium debris. If you have heavy leaf or twig debris, you may want to consider a pressure or robotic cleaner. For help deciding which cleaner will best meet your pool cleaning needs, you can use our Pick Your Cleaner tool here: https://www.zodiac.com/en/united-states/pick-your-cleaner For more information about Zodiac suction cleaners, you may visit: https://www.zodiacpoolsystems.com/en/products/suction Thanks for considering Zodiac and Polaris pool products. We hope you find the solutions you are looking for! Zodiac Pool Systems Manufacturer of Jandy, Polaris, and Zodiac products
Question:	My pool wall has a 4 inch standing ledge which runs the circumference of the pool. Can the MX8 traverse this ledge while climbing the wall
Answer:	Hello, As an authorized TACKLIFE seller, every TACKLIFE Suction Pool Cleaner you buy here will come with a 1 year assurance from the day of your purchase. If you need any help and further information about our product, please contact us through email: [email protected]. We will respond to you in 24 hours. Wish you all the best. :) Regards
Question:	I have an old 20k gallon kidney shaped pool with a singe speed 3600 rpm motor, i have a dedicated 1-1/4" vacume connection w/ a gate valve
Answer:	I did not fine this device user friendly at all.
Question:	It the only real difference the scrubbers on the cyclonic turbines? I've compared and that's basically what I've found to be the only difference
Answer:	Yes! That is the kind of pool I have and it works great. Just insure that your pool pump is at least 3/4 horsepower

Product features

Zodiac MX8

Combat debris with the Zodiac MX8, an ultra-efficient, low-flow pool cleaner that cleans faster and more aggressively than any cleaner in its class. No more time wasted battling a filthy pool. Eliminate your call of duty and claim victory over debris.

Dual Cyclonic Suction

Cleans better and faster than other pool cleaners with greater vacuum power, a wider cleaning path, and the largest debris inlet.

Adjustable Intake

From fine sand to fallen leaves, the MX8 features a Convertible Debris Inlet that allows for larger debris consumption.

maX-Drive Navigation

Advanced 360° directionality for the best pool coverage with no hang ups while X-Trax rugged track design enables exceptional maneuverability with extreme wall climbing capabilities to thoroughly clean your pool from the floors up to the waterline.

Twist-Lock Hose with Quick Disconnect

The 39’ Twist-Lock Hose ensures optimal performance by reducing vacuum loss and is easily attached to the cleaner with the Quick Connect.

Energy-Efficient Design

The innovative Flex Power Turbine enables ultra-efficient operation even on low flow pumps without compromising power—making the MX8 the cleaner of choice for solar, two-speed, and variable-speed pumps.

Wide Cleaning Path

Clears a large path through dirt and debris for more comprehensive pool coverage.

• Hand off your pool cleaning duties for good! With the Triton PS, your pool will be left clean and ready for splashing fun in just 2 hours. Ideal for pools up to 50 feet, sit back and relax while Dolphin does all the hard work for you.
• Built to deliver a deep clean. The Triton PS is powerfully nimble on vertical surfaces for intense wall and waterline scrubbing. With superior filtering capabilities, dirt and debris can't hide from this underwater cleaning machine.
• Sustainably designed and energy efficient. Unlike suction and pressure cleaners, Dolphins are independent cleaning machines that do not rely on your pool pump or filter to get the job done. Extend the life of your pool’s system and save energy with every pool cleaning.
• Say, “hello” to your newfound free time. Schedule the Triton PS to automatically clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	Can this be left in the pool
Answer:	I have to lift the Triton and remove the basket from the Triton to wash out the debris. I can move the Triton to the pool step to do this.
Question:	Why isn’t my basket filling up it’s not jamed
Answer:	The first time I used the robot, it ran for less than 30 minutes and stopped working. I checked the basket and it was FAR from full! I though that I had a lemon, but later realized that the vent looking thing on top of the robot was full of debris. I don't know what you call that part, but it has holes that kinda look like the shape of a honeycomb and it's right on top and water circulates through it or something. Apparently, if it's clogged w/ debris, the robot will stop working. I had to get my water hose and wash that out and it worked perfectly fine after that. My only complaint is that I have to do that quite a bit. So, although I have a big basket, mine never gets a chance to get full. That may just be my experience, but that's my greatest issue at this point. However, it cleaned the pool well, climbed the walls and even climbed onto the built in bench!
Question:	Does the cord get tangled on the new triton power stream models
Answer:	I have been using the vacuum for about 3.5 weeks since I received mine from Amazon. So far, I have had no issues with the tangling of the cord whatsoever. I must have used this vacuum literally 15x because my pool was filthy when I opened. The Unit has performed very well. I previously owned the Dolphin Dynamic where you had to alternate the handle to avoid the cord tangling. Even with that machine, I never really had issues. This machine is much lighter and easier to clean than my past unit. So far, I am extremely happy with it.
Question:	New unit is underwhelming. its missing a lot of dirt and leaves. now on 4th cycle. am i doing something wrong? expected better cleaning than this
Answer:	To pick up big stuff remove the bag from the chute. That allows it to pick it up without getting clogged. Do put the bag bag for regular cleaning so it will get all the smaller particles. This is the 2nd Dolphin I've had and they both work wonderfully!

Product features

Dirt & Debris Doesn’t Stand a Chance

The Triton PS has superior filtering capabilities. It traps and locks-in all sorts of dirt and debris so you pool is left exceptionally clean

Get a Really Clean Pool

This Dolphin intensely scrubs the pool’s floor, walls and waterline for you. Gone are the days of manual brushing.

Always Easy to Handle

The quick water release makes it easy to remove from the pool. Don’t worry, it only lets the water out and not the stuff trapped in the basket.

Triton PS Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor, walls, and waterline

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 60 ft. Tangle-free cable

Suction Rate: 4000 GPH

Robot Weight: 16.5 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to store/roll/operate cable

When your Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

• Cost-effective - Powerful dual motor with 4 scrubbing brushes provide you an exceptional, heavy duty, cleaning performance. It can automatically remove tough dirt and debris, making the task of maintaining a clean pool an easy job.
• Plastic Slips, Sponge Gripse - Features 4 Non-slip sponge scrubbing brushes, giving the cleaner strong grips for side walls, floor& waterline cleaning.
• Goodbye! Debris!e - Through its advanced computer-controlled cleaning technology , the QT Robot knows how to navigate your pool while sucking up leaves, algae and debris, ensuring you have a crystal clear pool for summer.
• Effortless Filter Cleaninge - To clean the filters - simply press the button in the front to open the top covers, remove the filter baskets, and rinse them with a garden hose.
• Enjoy Your Hot Summere - IPX8 waterproof design allows you to leave the wall-climbing robotic pool cleaner underwater. Enjoy more quality time with your love ones by freeing yourself from the chore of pool cleaning!

User questions & answers

Question:	How can I get replacement parts (sponge brushes, drive belt, etc
Answer:	It does NOT fit into a standard box hole but needs an adaptation. If you are handy you can figure it out, otherwise it's a pain.
Question:	The robot seems to be staying in the same area at the deep end of my pool. Is this common
Answer:	If your floodlight is 120 v. ac it will work.
Question:	My cleaner is not moving. it bubbles, but does not move. it had been working fine for about a month since i bought it. what is the problem
Answer:	No... it is Feb '19 now.
Question:	Just took it out of the box.....why does the handle feel so sloppy and loose
Answer:	Yep... unfortunately though there is not a settable delay. So using it say for an internal car alarm etc... does not work.

Product features

Qomotop: Keep Clean and Keep Safe!

Having fun in the water is only the tip of the iceberg of having a pool. The rest of the iceberg relies on pool maintenance. It is a constant struggle to balance the time it takes cleaning the entire pool versus the actual leisure time of enjoying it. Imagine scrubbing a large pool to clean it free from the dirts, sand, leaves from nearby trees, and grass from the yard.

Now imagine enjoying the pool with your friends and family while this automatic cleaner takes that chore on for you giving you the freedom to enjoy your pool instead of slave over it.

Notes Please - The robot has roller brushes which are made of sponge material, they 've been dampened in the factory but after long time transport may become dry again and with buoyancy, so the robot will be hard to sink for the first use.

We suggest soak the pool robot into the water for 2 hours before the first using, ensure sponge brushes all softening. Then it will be easy to sink into the water. It Can't Climb Steps.

Your smart investment for hot summer ;)

• Multipurpose. This cleaner can be used on all pool types – concrete, fiberglass and vinyl liner pools. It does a great job on all surfaces; vacuums up dirt, debris and even twigs.
• En vironmental-friendly. Provides healthier clean by reducing the amount of chemicals needed.

• Versatile. 4 powerful scrubbing brushes Offering you a thorough cleaning of Waterline, Side walls & Floor.
• Quick set-up. Just plug in the power supply, place the cleaner in the pool and press a button.
• Low maintenance. Simply remove the filter and rinse it with water. Also can be stored underwater.

Advanced Design

• Sponge brushes not only have better grip but also give a smooth finish while cleaning your pool.
• The pump motor draws debris into the unit's filter, and the drive motor moves the unit to navigate the pool.

Intelligent Navigation

Through its advanced computer-controlled cleaning technology , the QT Robot knows how to navigate your pool while eating up leaves, sand and debris.

Excellent Climb ability

High quality tracks are the reason why the QT Robot is better at climbing walls and negotiating sharp corners.

Please notice it can't climb steps.

Cleaning Modes

• Less is more. You decide the cleaning cycle that you want by simply pressing the button "Cycle". No apps needed.
• 1 hour, 2 hours or 3 hours setting for you choose, the Qomotop robot will automatically and thoroughly clean the bottom, walls and the waterline without supervision.

2 Large Filter Baskets

• Two large filter baskets trap and lock leaves and debris leaving your pool crystal clear.
• Easy to clean. Simply rinse the filters with a garden hose
• Fine filter capacity 180 µm. not suitable for purify ultra fine dust in water. Great for leaves, dirts and sand.

Lightweight & Handy

• Weights 22 lbs.With the help of the user-friendly designed handle, you can lift it out of the water without a caddy cart. There is no need to spend extra money on unneeded accessories.