14 best ground pool cleaners

Product description

Deluxe automatic pool cleaner vacuum with a set of hose included! This item is perfect for efficiently cleaning dirt, leaves, debris, bugs, pebbles and short twigs from your pool; allowing you to spend more time in your swimming pool instead of cleaning it. No wheels or gears means no jamming, breaking or otherwise interrupting the cleaning process. Thinking smarter, not harder, is the key to enjoying your backyard oasis worry-free this summer! Features: Design- Design High efficiency and low maintenance Durable Cleaner - More durable than those cleaners made of thinner PVC Simple Design - There are no wheels to jam, no gears to break Its smart design for easy maintenance Existing Filtration System - Attaches to your existing filtration system. Acts like moving drain, moving more water through the filtration system over a shorter period of time Requirement - Require at least a 3/4 hp swimming pool pump or 1600ghp to function properly Great Energy Saver - The devices navigate around the water by themselves. This means that your pool stays clean without the need to expend your time and effort dragging cleaning implements through the waters Able to Clean Gently and Thoroughly - Soft and thickened pleated seal(base plate) to clean your swimming pool gently and thoroughly, regardless of size, shape, or construction. Clean your pool from top to bottom automatically and effortlessly Effective - Clean a variety of different types of debris from the pool including leaves, twigs, algae and numerous other particles. This can prevent a build-up of debris which could cause damage to the integrity of your pool Recommend for swimming pool up to 16' x 32' No tools required / No electricity needed Package Content: Pool Cleaner Hoses Sets Regulator Valve Manual

• 10 hoses included for up to 30' pool. Ideal for cleaning bottom surface and wall; does not clean stairs
• Require at least a 3/4 hp swimming pool pump or 1600 GHP to function properly.
• No tools required and no electricity needed; Attaches to your existing filtration system
• 1 Year Warranty for Parts Replacement (For order purchased from Amazon.com Prime and Ihubdeal ONLY )
• Cleaner should be moving about the pool at a rate of 8 to 12 feet per minute. Note : Refer to PDF attached below in Technical Specification for User manual

User questions & answers

Question:	what size motor does it need? will it go around on its own
Answer:	I have a 2100 GPH rated filter and the vacuum operates fine.
Question:	Will this unit replace a clogged Kreepy Krauly wall climber
Answer:	We are using it to replace ours...
Question:	Will it work with my 12x24 oval above ground pool
Answer:	Yes. I have a 16x18 above ground pool and 4 works beautifully! Eats the dirt, bugs and algae right up. I highly recommend it. And yes my pool is vinyl, no problems!
Question:	My pool cleaner stopped working after just three months - flapper stopped moving - Suction is great, pool filter is fine, cleaned flapper - now what
Answer:	Jeez. All pool cleaners get jammed every once and a while from debris, leaves, twigs being sucked into the mechanism. If you're going to buy and use your own equipment, you need to learn how to clean out anything it sucked up. With my pine trees, I might have to clean it once a week. To the other people replying--don't blame the product if you don't know how to use it. And yes, if you can't figure out how to clean it, do take it to a pool store. They'll probably show you for free, so great advice from the vendor. Yup, you do have to change the oil in your car, clean your furnace filter, and unclog your drains every once in a while.

Product features

Connect to Pump

1 HP power pump or above are recommended to use for this pool cleaner.

Connect to Filter

For better usage, the filter is recommended to be washed every week and kept it clean.

Function of yellow seal clip

Weighted stabilizer properly use the seal clip to keep the balance when you clean the pool. Recommended each Clip is for every 3-foot of depth of your pool.

How to use eye ball diverter

Adjust or twist eye ball divert to change the flow of water and to make sure the water flowing can be inside with right direction.

Hoses need to be right length

The length of the hose is very important while using a pool cleaner. With a hose that is too long you can get it tangled while moving around and with one that is not long enough you may get some spots that are not clean. Provided with adjustable hose lengths you can add or take off the amount of hose needed for your pool for the best fit.

Clean up debris from flapper regularly

When using the pool cleaner you should always remember to clean the flapper regularly. Before and after you start using the pool clean cleaning the flapper can greatly increase the flow of the cleaning making it more efficient and fast. Check inside the flapper for debris that might be stuck or debris that is building up and may cause future problems.

Tips: Please do not put the pool cleaner into the pool during the non-pool season to avoid the debris get into the flapper, and clean up it first before you start to use it in the beginning of pool season.

No air in the hoses

To get the optimal usage out of the pool cleaner, there should be no air in the hose while it is running. To avoid this issue, please leave the cleaner inside the pool as it will extract out air with water. Once its done, follow the instruction manual to operate.

Avoid erosion

Most of the pool chemicals or bleach would erode the materials of this product. To operate correctly, please wash the product after every usage and away from water. Specifically, except pool season, store the pool cleaner be outside of the pool in order to make it avoid erosion.

Smart Design - Adjustable Cleaner

Adjustable cleaner and diverter make it climb the walls of your pool and being a new cleaning pattern, also, it can be used by different positions by opening to redirect the return line water flow to clean properly in your pool, both of above ground and in ground.

Smart Design - Removeable Flapper

Freely moveable flapper is designed for prevent debris from being lodged inside. Debris can be removed by following instructions:

1. Taking out the screw from piffle plate and pulling it out.

2. Removing the flapper from main body and removing the debris.

3. Inserting the flapper back into the main body and snapping the baffle plate back.

Smart Design - Adjustable Hose

Adjustable hose length by adding and remove extra hose sections which designed for reaching the end of the pool and better cleaning. It also can make it easy to position cleaner. (Important: The pump must be on when you check the hose length. The hose is getting shorter when the pump is operating and it will become longer when the pump is off).

Smart Design - Silicone ripple cleaner

This flat smooth surface seal can be used for concrete, tile, vinyl, and fiberglass finish pool. Easy to clean and gets rid of stains.

User questions & answers

Question:	Is it best to leave robot in the pool when not in use
Answer:	no because it should not be in pool when people are, especially if it is on. very dangerous.
Question:	Does it clean walls
Answer:	Mine climbs the walls all the way up. It cleans the cove at the bottom as well. I love this machine. It has totally cleaned my pool of all debris. I highly recommend it for above ground pools.
Question:	I have a ladder going into my pool. Won't this cord get tangled on the ladder
Answer:	Yes. If it fits behind your ladder, it will absolutely get tangled. Has happened many times. I am thinking of attaching a cross-bar that runs from the ladder to the pool wall to stop the robot from going behind.
Question:	Will it clean a 30’ round pool
Answer:	My pool is 15 x 30 and it cleans it pretty well. It may miss a spot here and there but this product is so worth the money.

Product features

No Extra Stuff Needed

No booster pump. No extra hoses. No installation. Just plug it in, drop it in, and walk away for a clean pool.

Lets all the Water Out. Fast.

The quick water release makes it easy to remove from the pool. Don’t worry, it only lets the water out and not the stuff trapped in the basket.

Goodbye, Dirt and Debris!

The E10 traps and locks-in all sorts of debris so your pool is left exceptionally clean.

E10 Packaging List

Ideal Pool Length: Above ground pools up to 30 ft.

Cleaning Coverage: Floor only

Cleaning Cycle Time: 1.5 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off

Cable Length: 40 ft.

Suction Rate: 4000 GPH

Robot Weight: 13.8 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Product description

This powerful pool cleaner is designed just for Intex pool owners and will automatically clean and vacuum the entire pool floor for hassle-free pool maintenance. Vacuums come complete with a 24ft. hose and attach easily to Intex inlet connectors with 1 1/2in. or 38mm hose fittings. For Intex above ground pools with filter pumps with a flow rate of 1,600-3,500 GPH. Not suitable for in-ground pools.

• Requires a filter pump with a flow rate between 1,600 - 3,500gph
• Attaches to the inlet connector in the pool with a 24'7" hose
• For Intex above ground pools with 1-1/2" hose fittings
• Not suitable for in-ground pools
• Ensure the cleaner is set up properly and all air pockets are removed from the cleaner hose to have maximum performance. Please refer to user manual before use
• Replacement parts are available for purchase through the Amazon Online Return Center. For missing, defective, or damaged parts, please utilize the Return Center to obtain a replacement product.

User questions & answers

Question:	Anyone know where to find the replacement filter screen for this? Mine ripped a month after use
Answer:	Mine ripped also after a while. I just went to Walmart and bought some very fine netting and wrapped it around the frame. 97 cents and I was back to vacuuming my pool.
Question:	does this work with any above ground pool or does it have to be an intex, also does it come with all hose and attachments
Answer:	I have a Bestway 18'x9'x48" Rectangular Frame Above Ground Pool and it works on mine. I just had to remove the screen filter that goes to the return fitting but it works perfect. Picks up leaves, berries,small sticks and sand that occasionally comes out Sand Filter. This is my 3rd unit I've had. The first I purchased was one that was said to be new but was used and had leaky hoses, returned for refund. Second One that arrived was brand new but was damaged in shipping had to returned for refund. This last one is perfect so far and has updated single hose instead of the put together one. I Leave it running when grandkids aren't in the pool have not had to skim floor or water since. Note as others said you need a strong pump. I upgrade my pool to a Sand Filter,Saltwater Chlorine Generator, In Wall Skimmer and 1 1/2 Hp Pump.
Question:	Does this work good
Answer:	I was going to write a review about this as I just purchased it, but Amazon wouldn't let me do it saying they were not allowing reviews on it at the moment? What the heck? Anyway, I would give it a solid 4, maybe 5 if it had been assembled properly when we got it. It works now after my husband realized what was wrong. After we got it going, it does an amazingly good job of cleaning, especially for the price. Here's a trouble shooting hint if yours doesn't move when you first try it. Hope it helps. My husband wrote the following: How to troubleshoot an Intex Auto Cleaner which will not reverseWe recently bought an Intex Auto Cleaner. When we first used it, it would move across the floor of the pool, hit a wall, and then stop. It turns out that it was improperly assembled at the factory. Here are the steps to follow to fix this problem:1. Disassemble the Auto Cleaner and open the drive assembly. There is a good YouTube video on how to do this.2. After disassembly and careful removal of the cover of the drive assembly, you will notice that there is a large gear on the left side of the drive assembly. If you manually rotate this gear, you will notice that a plastic piece that resembles an upside down "U" will move to the right, stop for a bit, then reverse direction and move to the left.3. On the cover of the drive assembly, you will notice a small lever which operates a flapper valve. This flapper valve should operate freely by hand.4. CRITICAL STEP! As you reassemble the drive assembly, ensure that the small lever is placed within the upside down "U". If it is outside of the upside down"U", your Auto Cleaner will never reverse and operate as intended.Hope this help
Question:	i have an intex above ground pool with algae at the bottom that i need to remove so which vacuum do u recomend me to have
Answer:	The Intex is a fairly decent pool vac, but it will only pick up loose dirt and debris, like any pool vac will. Get your chemical balance right and use a hard pool brush (no metal!) to loosen up the algae, then use the pool vac to clean it up. I did learn that the standard 1500 GPH pump does not have enough output power to make this pool vac move. You'll need the 2500 GPH pump (which runs about $85 here on Amazon) and a clean filter to make it run good. You'll also find that the 2500 GPH pump does a lot better job at filtering your pool water.

Product description

Package Includes:

1 x Swimming Pool Cleaner

10 x Durable Hoses Sets

1 x Regulator Valve

1 x Manual

Problem: Cleaner is sluggish or has stopped operating.

Solution:

● Check if the pump is ON and / or primed.

● Check Cleaner head for blockages.

● Clean and empty pump basket and empty skimmer/weir basket.

● Ensure the filtration system is thoroughly cleaned. Clean sand/cartridge filters on your pool

pump as per manufacturers specifications.

● Inspect the regulator valve and flush away any debris build-up.

● Check the Mat for wear.

● Make sure the curved tips of the Mat are facing upwards.

● Ensure that the skimmer/weir vacuum lid is fitted correctly and check for cracks.

● Check the hose for blockage.

● Check the hose for leaks by lifting each section above water while pump is running.

● Consult a pool shop in your area.

Problem: Cleaner travels in a repetitive pattern.

Solution:

● Adjust return jets downwards.

● Verify proper hose length.

● Ensure cleaner sits flush with the pool floor. Adjust the position of hose weight if necessary.

● This should be done at the deepest part of the pool.

● Remove or add one hose section.

● Inspect the Regulator Valve and flush away any debris build-up.

● Check that the hose sections are straight; if not, lay hose in a straight line in the sun to relax

the memory.

● Twist each hose section a half-turn at each connection point.

● Ensure the wheel at the top of the Cleaner head is rotating freely.

• EASY TO SET UP & EFFICIENT CLEANNING & SUPER QUIETLY. This pool vacuum cleaner is very easy to assemble and install and allows you to clean your pool effortlessly and quietly, unlike some other automatic pool cleaners that make an annoying hammer noise. Low noise, create a quiet operate environment
• WARM TIPS: Please notice that this pool cleaner vacuum requires at least a 3/4hp swimming pool pump or Minimum Flow of 6.5m3/hour/1700gal/hr. We recommend to adjust the weights and the regulator valve to get the best results for a clean pool.
• GREAT SUCTION POWER & CAN'T STUCK: This automatic pool cleaner for in-ground pools thoroughly cleans swimming pools including the walls! This pool vacuum can efficiently remove dirt, debris. Wheel Deflector for movement around tight corners. Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces.
• SAVE YOUR TIME, MAKE YOUR LIFE EASIER: Our pool vacuum provide a quick and easy way to clean your swimming pool. No jamming or breaking interrupting the cleaning process. It keeps the pool clean, and it will cut down a lot on your time spent cleaning the pool.
• WORRY-FREE GUARANTEE : One year warranty, if any part of this item broken you can contact us for a free replacement.We go above and beyond to provide the highest quality product. If you have any questions or concerns about your order,please keep in touch with us, we’ll always provide you a timely and satisfying solution. FREE HOSES: Our swimming pool vacuum come with ten durable hoses for replacement. You can attaches this pool sweeper to your existing filtration system.

User questions & answers

Question:	Will it work in above ground pool
Answer:	Has never worked on my above ground pool. I have an Intex 18x52 round with the pump provided with that model. It should have worked. Bought it September 2019. I think I’m just missing something. Had to adapt it to even hook it up and now it just sits on the bottom. Will try again when it gets warmer.
Question:	Will this cleaner get caught on a "Safety Drain Cover
Answer:	Mine has not
Question:	Can use on the vinil pool
Answer:	yes it works well
Question:	What is diameter of suction inlet
Answer:	1 3/4 inside diameter. It's a great product and cleans much better than the Barracuda G2 that it replaced. We recommend.

Product features

Clean Area Note

In order to peotect vacuum, the cleaner can work on curved surfaces but do not clean the stair on the pool.

Cleaning Type

The pool vacuum can clean algae, dirt and dust but can not clean leaves.

Underwater Work

Just drop into the base of pool and the max deep is 9.8ft.

Product Specification

Vacuum head, blue skirt and hose size display.

Accessories Display

Comes with ten hoses, one weight, one regulating valve, diaphragm.

If the hose is too long or too short, you can increase or reduce hose.

Hose Diameter

Each hose diameter is 1.96 inch.

There a special hose which need to connect to pool vacuum, and other hose neen to connect with that.

Ten Hoses

Come with 10 hoses total 33 ft, each hose is 3.3ft.

White Little Weight Function

White little weight can keep balance when you clean the pool and seal the hose.

Blue Disc Installation

Need to install the blue disc counterclockwise.

No Air In Hoses

In order to get great usage effect, should be no air in hoses before using. Make sure the hoses in no leak and the pressure is normal.

Diaphragm

The diaphragm is silent and service life is 200 hours.

• Delivers unmatched performance in an above-ground cleaner at an unthinkable cost.
• No messy bags! Large and in charge oversized debris cartridge holds up to 60% more debris
• Hypergrip Continuous Tracks - leaves wheels cleaners in its wake!
• Hyperbrush Dual Scrubbing Brushes scrubs away difficult to remove contaminants.
• SmartNav 2.0 Robotic Scanning. Only 14 lbs. Energy Efficient 24 Volt DC motors. One year warranty.

User questions & answers

Question:	What is the return policy if we are not satisfied
Answer:	Have taken out extra 3 year warranty, but it is one year otherwise.
Question:	Can you plug the power box into a heavy duty extension cord? My power supply is 12 ft from the pool and i have a 27ft above ground round pool
Answer:	As long as the extension cord, and the plug to the power supply are covered, and do not get wet, it will work!
Question:	Where can i purchase the fine partical filter
Answer:	Amazon is a great place to look.
Question:	Can this be used for in ground pool too
Answer:	Absolutely, this cleaner can!

Product features

The New Benchmark

Take whatever preconceived notions you may have about pool robots and throw them out. The all-new Escape is here with groundbreaking technology to ensure that your pool is cleaned to a whole new level.

Onboard DC Motors

Escape’s low voltage DC motors operate on nearly 90% less power than old fashioned cleaners. While other pool cleaners can expend a massive 1800 watts of power, the Escape robot requires just 180 watts which is just 5 cents per hour.

Active Scrubbing Brush

For most pools, vacuuming isn’t enough to remove algae and other stubborn build-ups attached to the pool’s floor. That’s why engineers equipped the Escape with the active scrubbing brush to deliver a new level of clean.

Continuous Tracks

Water between the wheels & pool surface results in slippage and lost efficiency. Escape takes a radical departure from the conventional wheel with continuous rubber tracks. No more slipping. No more wasted energy.

Massive Top-Load Filter

For a complete clean, your robot needs filtration that can handle debris of all size. Escape’s massive filter cartridge is easily accessed from the top. Messy, cumbersome debris bags used by traditional pool cleaners are a thing of the past.

Smart Navigation

Gone are the days of watching your robot aimlessly wander. Smart navigation and scanning software uses advanced algorithms to efficiently clean your pool. Escape’s ability to sense walls, ladders and drains delivers uninterrupted cleaning.

Product description

Give your Intex pool its best performance by using genuine Intex brand, easy to clean, Dacron filter material! Filter the water in your pool to keep it attractive and refreshing all season, it is recommended to change the filter every 2 weeks. - 4 Pack of Intex Filter Cartridges - Shrink wrapped with litho label - Replace filter cartridge every two weeks These 29000E/59900E filters fit the following Intex pumps: 500, 530, 800, 1000 & 1500 gal/hr filter pumps models 28603EG, 58603EG, 58604E, 28635EG, 56635EG, 56636E, 56637E, 56638E & 58623, & Intex filter pumps or "Krystal Clear" filter pumps models 02 & 12R @[video](cDZ5LLM1n6E)

• Genuine Intex Type A filter cartridges
• Includes 4 filters
• For the 500, 530, 800, 1000 & 1500 gal/hr filter pumps models 28603EG, 58603EG, 58604E, 28635EG, 56635EG, 56636E, 56637E, 56638E & 58623, & Intex filter pumps or "Krystal Clear" filter pumps models 02 & 12R
• This filter also works for Summer Escapes type C filters
• Shipping Weight: 2 LBS

User questions & answers

Question:	Are these the same as a best way type lll
Answer:	Yes they are the same as type A
Question:	Does this fit the coleman above ground pool
Answer:	Yes... that what i have!
Question:	Cuantas pulgadas el filtro
Answer:	No se cuantas pulgadas pero quedo bueno .al filtro de la piscina.
Question:	Gue medidas tiene en pulgadas
Answer:	8 pulg.

Product description

The Aquabot Pool Rover Junior is specifically designed for anyone with a flat-bottom above-ground pool. Designed to be simple to use and service, the Pool Rover Junior is built with a powerful pump motor to ensure the needed suction power that many above ground pools demand. This cleaner is also equipped with an adjustable axle pin to help maximize coverage and prevent cable tangling. Not all pool cleaners are created equal. Advances in Aquabot robotic technology have enabled us to offer many advantages to antiquated cleaning traditions that can truly make a difference in the quality of your pool experience. At Aquabot we believe in crystal clear water with fewer chemicals and a healthier clean.

Leave the hassle of heavy, tangled hoses behind, and improve the functioning of your pool's filtration system with the Aquabot Pool Rover Jr. Robotic Aboveground Pool Cleaner. The Aquabot Pool Rover Jr. is an easy, fast, and efficient way to clean any aboveground pool regardless of shape or size. Simply turn the robotic cleaner on and drop it into your pool. The Pool Rover Jr.'s 24-volt pump motor will filter water and scrub even the toughest dirt from your pool floor with vacuum suction and a patented jet-drive propulsion venture system.

By reducing the amount of time your pool's filtration system has to work, the Pool Rover Jr.'s filtering and cleaning capacity reduce the chemical, water, and energy costs associated with the maintenance of your pool.The Pool Rover Jr. is equipped with its own internal pump and filtration system with a reusable state-of-the-art filter bag to trap algae and bacteria as small as two microns, as well as dirt, leaves, and sand. The safe and efficient 24-volt motor is inexpensive to operate and cleans most pools in under one hour. The Pool Rover Jr. has extra-wide non-marring wheels that roll over any surface ripples or footprints to clean your pool completely and will not get stuck in ladders or corners. The unit has an easy-to-set guidance system that will clean aboveground pools of any shape.

Specifications:

• 40 feet of floating cable
• Built-in 2-micron fine reusable filter bag
• Power supply transformer
• 2-hour automatic shut off timer
• 24-volt pump motor
• Removes large leaves to algae as small as 2 microns
• Reduces chemical, water and energy costs
• Internal pump
• Guidance system
• Extra-wide non-marring wheels
• Made in the U.S.

Manufacturer Warranty

One-year for motor

From the Manufacturer

Leave the hassle of heavy, tangled hoses behind, and improve the functioning of your pool's filtration system with the Aquabot Pool Rover Jr. Robotic above-ground Pool Cleaner. The Aquabot Pool Rover Jr. is an easy, fast, and efficient way to clean any above-ground pool regardless of shape or size. Simply turn the robotic cleaner on and drop it into your pool. The Pool Rover Junior will filter even the toughest dirt from your pool floor with vacuum suction and a patented jet-drive propulsion system.



By reducing the amount of time your pool's filtration system has to work, the Pool Rover Jr.'s filtering and cleaning capacity reduce the chemical, water, and energy costs associated with the maintenance of your pool. The Pool Rover Jr. is equipped with its own internal pump and filtration system with a reusable state-of-the-art filter bag to trap algae and bacteria as small as two microns, as well as dirt, leaves, and sand. This pool cleaners is inexpensive to operate and cleans most above-ground pools in under one hour. The Pool Rover Jr. has extra-wide non-marring wheels that roll over any surface ripples or footprints to clean your pool completely and will not get stuck in ladders or corners. The unit has an easy-to-set guidance system that will clean above-ground pools of any shape.



Under "Specifications" please REMOVE:

• 24-volt pump motor

Manufacturer Warranty should say:

• 1- Year Full Warranty

• Pool rover Jr. comes with 40-feet of floating cable, a built-in 2-micron fine reusable filter bag and a power supply transformer
• Fully automatic robotic cleaner vacuums any round, oval, or rectangular flat-surface above-ground pool in 1 hour or less without hoses
• Powered by a 24-volt pump motor that provides vacuum suction and jet-drive propulsion and works with the touch of a button
• Extra-wide non-marring wheels roll over any surface and patented E-Z swivel device ensures a tangle-free cable
• 2-hour automatic shut off timer; reduces chemical, water, and energy costs; 1-year warranty for the motor.Surfaces: Vinyl, Gunite/Concrete Fiberglass, Tile

User questions & answers

Question:	We have a 30' round above ground pool with "wedding cake" pool steps. Will the cleaner move around them without getting stuck
Answer:	Jennie, What happens is the Pool Rover will stop when bumps into something and reverse direction. Remember to lock the wheel axle at an angled position so it will continue in a circular pattern. This unit is excellent!! My pool is 18' round above ground and it cleans my pool when it has leaves and debris in about 15-30 minutes. It really is amazing. One tip I have learned about cleaning the bag: if possible, let it dry out a couple days then, empty it out, then rinse it clean in COLD WATER ONLY. Do not use any chemicals or detergents. Good luck. Let me know how it works out for you.
Question:	do you support 220v
Answer:	Christine, sorry but at this time only 110V
Question:	Why does it keep stopping after a few minutes even when the bag is clean
Answer:	This means a relay has gone out inside the power supply, and it will not engage for more than two so three seconds. Do not expect warranty service from Aquatic Distributors out of Mahwah, New Jersey - this is the company Pool Rover has contracted with to fix all of their defective products. I have been waiting for a call regarding my pool rover for 3 months from the fools over at Aquatic Distributors, and have since decided to deal with the Better Business Bureau. Next will be a false advertising claim levied against the manufacturer for contracting with Aquatic Distributors in order to fulfill their legal requirement of a warranty - even though they (Aquatic Distributors) do not have the prerequisite infrastructure to complete repairs. 5 People cannot service 5k machines a year. The first time I called I was on hold 50 minutes, the second time I called I was on hold an hour and 20 minutes, and the third(and final) time I called, I was on hold 2 hours and 10 minutes, just to get someone who was devoid of English - spoke in Ebonics and did not offer me any assistance. I will never purchase another pool rover, or deal with the inebriates over at Aquatic Distributors/Aquatic Degenerates ever again.
Question:	Will this cleaner get stuck on ripples of the liner of an above ground pool
Answer:	Beverly, great question, this is Steve at Aqua Products. The Pool Rover Jr. wheels are designed large to handle this very issue. So no it should not get stuck.

Product features

Aquabot Pool Rover Junior

The Aquabot Pool Rover Junior is designed to clean residential Above-Ground pools. The Pool Rover Junior will vacuum and micro-filter dirt, debris and contaminants from the pool floor. The Junior has an easy bottom access filter bag filtration system with filtration down to the smallest of particles (2 microns nominal).

In addition this cleaner also a 40-foot cable and convenient power supply with 2 or 3 hour options.

Savings

Aquabot helps you save water, chemicals, and energy. Save on water / back-washing, as all debris are self-contained in the unit. Save on your total chemical usage via better water circulation and the finest filtration in the industry. Save on your pool electric usage.

Safe and Reliable

Aquabot robotic pool cleaners under go rigorous testing for both safety and performance. Our cleaners also under go approval from a national independent organization (ETL) to ensure compliance. At Aqua Products we take safety very seriously and are proud to report of no known incidences of product related injury.

Report No.: 100206502NYM-003a

Issue Date: Sept. 23, 2016

Exclusive Hydro-Robotic Technology

This cleaner utilizes our Patented 'Hydrorobotic Technology', that propels the cleaner through the pool with the powerful force of water. This allows for fewer parts (no drive motors), fewer and cheaper repairs and Industry leading suction power.

Enjoy Your Pool

Let Aquabot's automated cleaning system do the dirty work for you. Your Aquabot is designed to handle all the work and worries so you can enjoy your pool more.

Finest Filtration

Aquabot cleaners are engineered with the finest filtration in the industry (down to 2 microns nominal). They remove more debris to keep pools physically cleaner, substantially reducing the amount of chemicals needed. It all adds up to fewer chemicals for a healthier clean.

Simple and Easy to Use

The Pool Rover Junior is equipped with an adjustable axle pin to help maximize pool cleaner coverage and prevent cable tangling.

Product description

This Polaris Vac-Sweep 65 pressure side pool cleaner works in most in-ground vinyl or fiberglass pools, even those with uneven bottoms to a depth of 5 feet. It installs in just minutes and includes a ready to connect 1.5-inch threaded return line and 24 feet of float hose (enough for pools up to 24-feet round).

This automatic above-ground pool cleaner uses the existing pool's filtration system to direct powerful jets of water against the pool floor to loosen debris in hard-to-reach places. The detachable debris bag trails behind, trapping even large debris like leaves and pebbles before they clog your filter. The cleaner works on the pressure side of your pump and distributes filtered, treated water throughout your pool as it cleans.



Polaris Vac-Sweep 65 6-130-00 Pressure Side Automatic Pool Cleaner; 24-foot float hose; filter bag; owner’s manual.



Polaris cleaners are the number one recognized brand of pool cleaners worldwide and have enjoyed 40 years as the top selling pressure pool cleaner. The new robotics pool cleaners from Polaris display the same high quality engineering, rugged construction, and reliability that pool owners have come to expect from the brand. Polaris Pool is part of the Zodiac Pool Systems, Inc. family of products for the pool and spa.

From the Manufacturer

This automatic above-ground pool vacuum cleans pools with uneven bottoms to a depth of 5 feet. It uses the existing pool's filtration system to direct powerful jets of water against the pool floor to loosen debris. The detachable debris bag trails behind and scoops up debris, leaves and twigs before they clog your filter. The cleaner works on the pressure side of your pump and distributes filtered, treated water throughout your pool as it cleans, Installs on most above-ground pools and includes 24 feet of hose, enough for pools up to 24-feet round.NOTE: if you experience any trouble with this product not moving or moving in circles, please refer to the trouble shooting section of the attached user’s manual.

• Suitable for all aboveground pools up to 5-feet deep.
• Installs easily in minutes.
• Powered by the pressure of clean water returning to your pool, leaving both the filter and skimmer free to eliminate contaminants.
• Operates with pumps and filtration systems normally found on aboveground pools and vacuums the bottom and sweeps the sides in three hours or less.
• Patented jet sweep assembly blows water against the pool wall to loosen debris in hard-to-reach places and then sweeps it into an easy-to-remove filter bag.
• Unique filter bag removes debris, including larger items like twigs and pebbles before it reaches your pump, prolonging the life of your filtration system.

User questions & answers

Question:	Does this product work effectively in a vinyl lined in ground pool
Answer:	You can adjust suction. Try to find manual and download before purchasing. hope this helps
Question:	Will this work for my small in ground fiberglass pool
Answer:	Yes. My pool is below ground level and it works fine, even around steps. Above ground pools are an issue because of the ladders.
Question:	What else is needed to connect to return
Answer:	There is no video that I know of to operate. It is pretty much self explanatory when you open the box.
Question:	I have a small, shallow, in ground pool. Will the cement tear up the pool cleaner? Or is the 165 recommended due to size only
Answer:	I ran into the same problem. But out here in the country couldn't find an adapter. Returned & bought a Barracuda. Pool was a Doughboy 41X21 above ground.

Product features

Polaris Vac-Sweep 65 6-130-00 Pressure Side Automatic Pool Cleaner for Above Ground Vinyl Pools

Powered by the pressure of clean water returning to your pool

The Polaris 65 is our best above ground automatic pool cleaner. It installs in minutes and is suitable for all aboveground pools up to 5-feet deep. It loosens debris in hard-to-reach places and traps large debris, like leaves and pebbles, in its own filter bag. The Polaris Vac-Sweep 65 is designed for all above ground pools up to five feet deep, even those with an uneven bottom.

Features

• Installs in minutes. Operates with pumps and filtration systems normally found on aboveground pools and vacuums the bottom and sweeps the sides in three hours or less.

• Powered by the pressure of clean water returning to your pool, leaving both the filter and skimmer free to eliminate contaminants. Unique filter bag removes debris before it reaches your pump basket or filter, prolonging the life of your filtration system.

• Complete deluxe jet pool underwater vacuum with a 5 section pole (4 feet long total), scrub brushes and leaf bag.
• Attaches to a standard garden hose (garden hose not included).
• The water pressure from your hose creates a venturi effect that will draw leaves and other debris into the collection bag
• Ideal for cleaning spas, above ground pools, ponds, fountains, inflatable pools and for spot cleaning large pools.
• Buy with confidence, if you're not satisfied with this item at any time within one year of purchase, we'll provide a refund or replacement.

User questions & answers

Question:	will this pick up dirt
Answer:	I’m using it on i 7 and 2060 super it’s dope
Question:	Did it really take 2 months to deliver
Answer:	Yes. Nvidia = G-sync should not have a problem
Question:	Why did mine not come with a scrub brush
Answer:	Yes you can
Question:	Can you get replacement bag filters
Answer:	Looking at the back of the monitor, the HDMI, power, and audio connections are to the right of the mounting bracket attachment area. If the arm mounts straight back, or off to the left, no cable access issues. Otherwise you would want a 90 degree HDMI connection.

• 【Convenient Robotic Pool Cleaner】PAXCESS cordless automatic pool cleaner is the most innovative pool robot cleaner for Max.100㎡ inground pools/above ground pools. Put aside the restraint of the power cord, our cordless pool cleaner robot is equipped with 5000mah lithium-ion battery, which can achieve up to 60-90 minutes of work, it can operate without a cable attached to an electrical outlet, allowing greater mobility. IPX8 waterproof design for battery, please be assured to use it.
• 【Super Cleaning Performance】With deflector and powerful motor, this automatic pool cleaner with a fast-moving speed(appr.16m/min) and powerful cleaning ability, high frequency, fast speed, deep cleaning, saving time and effort. With two large suction doors, one bottom brush and superior filter, robotic pool cleaner can trap and lock in leaves, dirt, and sand, leaving your pool water sparkling clean. PAXCESS pool robot cleaner takes over your pool cleaning duties for good.
• 【How to let pool cleaner go ashore?】With advanced battery detection technology, paxcess cordless automatic pool cleaner will stop alongside the swimming pool shore when the battery drained out or completing the working cycle by itself. And you just need to pull up the floating handle to let the pool cleaners go ashore. Simply plug the robot pool cleaner into any 110v outlet to recharge for the next cleaning. Need about 4-6 hours for full charging.
• 【LIGHTWEIGHT&EASY TO CLEAN】 It’s equipped with a floating handle that can follow the movement of the robotic pool cleaner. Only 12.1lb, so it is very easy for elders or women to take the pool cleaner out of the pool. The cordless pool cleaner although can't climb the wall, but it can climb on max.15° pool slope.PAXCESS robotic pool cleaner are safe for all pool types , such as concrete , fiberglass and vinyl liner pools.
• 【Energy-Saving Pool Cleaner.】: No Installation&Hoses, No Booster Pump&Suction Lines,robotic pool cleaner requires minimal maintenance, do not rely on any additional equipment to get the job done.There are 2 wide suction doors, water flows out through the open nozzle to thrust the pool cleaner to move forward, you can adjust the nozzle by turning it to control the moving route to efficiently clean pool's floor. We provide 24-month warranty, pls contact us if you have any problems.

Product features

Economical and Convenient Cordless Pool Cleaner in the Market!

• PAXCESS Automatic Pool Cleaner Allows Greater Cleaning Mobility.

• It does a great job on all surfaces and vacuums up dirt, debris and leaves.
• Super lightweight Pool Cleaner for women and the elderly to pick it up.
• Provide healthier clean for your swimming pool by reducing the amount of chemicals needed.
• Good gift for the loved in this Summer !

Smart Navigation

• PAXCESS robotic pool cleaner pre-installed the intelligent navigation system,delivers highly optimized scanning and coverage for a new level of clean.

5000mAh-Large Capacity Battery

• The rechargeable automatic pool cleaner is powered by a 5000mAh large capacity lithium-ion battery that enables the cleaner to deliver constant performance up to 60-90 minutes cordless use to clean your pool.

IPX8 Waterproof Grade

• IPX8 waterproof design allows you to be assured of using the cordless automatic pool cleaner.

Easy Switch Knob

• Easy operation, put the cordless automatic pool cleaner into the water surface, then turn on the switch knob, the robotic pool cleaner will power on and the indicator light is steady blue. The pool cleaner will begin to work after the blue light flashes about 15s.

Superior Filtering Capabilities

• The cordless automatic pool cleaner has built-in fine reusable filter tray whose filtration precision up to 180 um, can trap dirt and fine debris while also cleaning and circulating the water- leaving your pool sparkling clean.

New Updated

• We add a charging port protector for every paxcess cordless pool robot cleaner. Charging port will not rust easily any more.
• Turn off the switch knob and check the charging port whether clean and dry before charging.

Product features

• How to Clean your Cordless Pool Cleaner?
• Easily steps to clean the filters - simply open the top cover of the robotic pool cleaner upward, take off the filter tray, then rinse them with a garden hose. PAXCESS provides pool owners with a hassle-free cleaning solution.

QA:

1. 1.Q:Why my cordless automatic pool cleaner wouldn’t sink to the bottom of the swimming pool quickly?

• A:Please don't worry, it is necessary to stay on the surface for 15-25 seconds until water flows out from the cleaner nozzles to the swimming pool before sinking to the bottom of the swimming pool.

1. 2. Q:Should I turn on the robotic pool cleaner before put it into the pool?

• A: Please pay more attention to this problem. Please remember that you should put the robot pool cleaner into the water before power it on, which can protect the wheels and the motors and extend their life.

1. 3.Q: Could I turn on the cordless automatic pool cleaner when charging?

• A:No, you can’t. Please turn off the pool cleaner and clean its charging ports before charging.

1. 4.Q: How to put the robotic pool cleaner into the pool?

• A:Put into or lift out from the pool with the cleaner bottom toward the wall to avoid any possible scratch to the pool wall.

• POWERFUL CLEANING & SUPER SILENT - This VIVOHOME pool suction cleaner is designed to devour all kinds of debris,bugs and algaes quickly and quietly, let you swim in cleaner water, enjoy a heathier and happier swimming time; And it works without annoying hammer noise, creating a silent operation environment
• OVERALL CLEANING - Our VIVOHOME automatic suction side pool cleaner is versatile enough to clean above-ground pools as well as inground pools (except soft wall pools) from top to bottom; By adjusting the water flow regulator and pipe’s length, it can climb the walls to remove all dirt and debris on them; And the wheel deflector help keeping the cleaner stable and sweeping the dirty corner through continuously moving and spinning
• STRONG ADHESION & BETTER CLEAN - The Finned style disc is adaptive to different surface, including tile, concrete, vinyl and fiberglass; And the TPU material increases its adhesion to pool surface, prevents damage to your pool and hugs the shape of your pool for the best clean
• EASY INSTALLATION - No tools required; Just follow the step by step instruction, you can assemble the vacuum sweeper within 15 minutes; The durable and scuff-resistant material ensures its better quality but requires little maintenance, saving you a lot of time
• COMPLETE KIT - Including 10 flexible PVC pipes with total length of 32.8ft, which will be suitable for every type and every shape swimming pools; 0.5 HP pump or greater is required to help the suction work normally

User questions & answers

Question:	Cual es el diametro de la manguera ? De 1.5 pulgadas o 2 pulg
Answer:	3cm
Question:	i have a 1500 GPH pump will this vacuum work with my pump
Answer:	1.2"X 0.6"
Question:	Why does the vacuum gets stuck on the stairs
Answer:	It does work but the range is not as long as they specify. I only saw about 3cm.
Question:	Encaja bien a todo tipo de desnatados o skimmer
Answer:	Depends on the resistance of the circuit. I’m totally guessing here and I have not measured this. But I would guess something like 400 ma

Product features

VIVOHOME Upgraded Swimming Pool Vacuum Cleaner Dark Blue

Scrubbing and buffing the walls and floors of your swimming pool will make it clean and shining, but it takes a lot of labor, hardwork and time; Why not try our VIVOHOME pool suction cleaner, it will help you suck up all dirt and debris quickly and quietly without great effort, saving you a lot of time as well as keeping the water clean, making the swiming pool become a sparkly highlight of your neighborhood get-together and summer barbeques.

More About The Product

Product Specifications:

Hose length in total : 10m / 32.8 feet; Pool Depth: 0.8-3m/2.5-10feet

Pump Power: ≥0.5 HP/1000gallon

Main body Material: ABS; Hose Material: PVC; Base Plate Material: TPU

Package Includes:

• 1 x Suction cleaner (Including Accessories)
• 1 x Finned style base plate
• 10 x 1m / 3.28ft hoses

Deflector Wheel

The Deflector Wheel keeps the cleaner stable in the water, helps the cleaner continuously moving and cleaning even crowed in a tight corner, enhancing its agility and cleaning ability

One Cleaner, Adapt to various surfaces

The finned style disc is not only adaptive to multiple pool surface, including tile, concret, vinyl and fiberglass, but also provide a wider cleaning path and area, which increase its practicality and efficiency

10 Flexible Hoses and 2 Weighted Stabilizers

You can adjust freely the hose length by adding or removing extra section pipes in order to let the cleaner reach everywhere it wants, which is suitable for all size of pools and beneficial to better cleaning; 2 Weighted Stabilizers keep the pipe banlance and prevent it from been tangled when you clean the pool

Product description

Set the redesigned Kreepy Krauly 'Lil Shark loose in your pool and watch it go on the prowl for dirt and debris. 'Lil Shark has a stylish new design that brings a fresh and fun look to your pool cleaning experience. And it deploys powerful cleaning action against even the toughest grime; its dual band of sturdy nylon bristles actively scrubs away stubborn debris that other cleaners leave behind. 'Lil Shark is built to last, with a rugged housing and only one moving part. It installs in minutes - no special tools or fittings are required. Just attach the hose, place it in the water and watch it do the work for you automatically.

• Dual Band Of Bristles Scrub Debris Loose While Powerful Vacuum Whisks It Away
• Programmed Cleaning Provides More Complete Coverage Without The Missed Spots Other Cleaners Often Leave Behind
• Cuts A Wide 10" Path For Quick And Thorough Cleaning
• Simple Design Features One Moving Part For Long Dependable Life
• No Assembly Required Just Hook 'Lil Shark Cleaner to The Hose And Go

User questions & answers

Question:	Can anybody tell me where the flow director piece goes? The book does not say
Answer:	Yes, it comes with a new wiring pigtail if you need to cut off and replace your current wiring pigtail. If you are replacing a KN COSM IB unit, you will not need the wiring pigtail as you will be able to plug the new unit into the existing connector you have installed.
Question:	Does the Lil Shark come with any hosing
Answer:	Yes
Question:	What size pump do you need? hp or gph?....we bought the 2,100gph sand filter pump but not sure of that hp with that unit
Answer:	Yes
Question:	I have an 18x33 pool it only comes with 30 ft of hose is there an extension we can purchase in addition
Answer:	Both of my KN-COSM-1B just shut down. It's like a bad battery chirp every 30 seconds meaning the alarms are too old when you replace the battery and it continues to chirp. The date on the back is Nov. 2012 which would be less than 8 years. If the instructions say 10 years, that is incorrect or an improvement from the 2012 model that lasted a little over 7 years.

Product features

Pentair Kreepy Krauly Lil Shark Above Ground Pool Cleaner

The ‘Lil Shark cleaner features high-performance, two-way cleaning to vacuum even the toughest grime. Dual-band bristles scrub debris loose, while the powerful vacuum action whisks it away.

• 【Large Battery Capacity】A Large 5000mAh powerful lithium battery offers up to 60-90 minutes of non-stop cleaning after charging 4-6 hours. This innovative robotic pool cleaner is designed for in-ground and above ground swimming pool with flat-floor up to 861sq/ft and water depth of 6.56ft. You can take back your free time and enjoy a cleaner pool without the rigorous labor of cleaning manually.
• 【Cordless&Lightweight】: No clutter cord, this hassle-free cordless pool cleaner quickly cleans your 100㎡pool in less than one hour without supervision, no worrying about cord entanglement, cord damage, make the cleaning process smoother than other cord pool cleaner. AIPER SMART Cordless automatic pool cleaner will take care of everything, a revolution in pool cleaning.
• 【Agile & Efficient】: Clean fast, this cordless automatic pool cleaner built-in 2 strong suction doors and 1 brush in the middle of the bottom, easily travels the floor of your pool, attack all kinds of garbage like leafs, buds, tough dirt, debris,and cleaning hard to reach spaces. Features in touch & reverse technology helps touch wall then reverse running direction.
• 【Intelligent Auto-landing Technology】With excellent battery and state-of-the-art scanning technology, this system allows the machine to stop alongside the swimming pool shore when the battery drained out or completing a working cycle, which means you just need to grab the floating handle and get it out of the pool.
• 【Fits All Shape Pools】Adjust the nozzles base on different pool situation to control its running path. Ideal for residential flat bottom pools of all shapes. Weights only 13LB, you don’t need to spend manual labor, just drop it in and let it go. IPX8 waterproof system makes it’s safe and reliable to clean in the pool.Backed by a 2-year quality assurance, get a worry free clean.

User questions & answers

Question:	How big a swimming pool can this robot clean and what's the maximum depth
Answer:	We have owned this Robot Cleaner for about one year. Does a great job. We have a 21 Foot Round above ground pool 54 inches deep. Takes about 45 minutes to cover all areas of the pool and we are very happy with it.
Question:	I have a oval bestway 18×9 above ground pool what angle should i put it on for cleaning
Answer:	We have an oval pool, 15 X 25. I put it on 1 click off center. Does a great job.
Question:	Is this for a soft lined pool
Answer:	Its in or above ground and awesome
Question:	Is there a warranty
Answer:	Yes 2 year on motor and electrical not broken pieces but can order through company. We loved it for our first season so far, my granddaughter calls it her baby shark.

Product features

Always ready to clean

Built-in 5000mAh lithium battery to run for up to 90 minutes before recharging. Red charging indicator light indicates the battery is charging. Green charging indicator light indicates charging is finished.

Always Easy to Handle

This automatic pool cleaner is compact and lightweight, you can easily remove from the pool. Also easy to care for it, just lift it to get it clean. Tips: Install the swing plate provided and floating handle before use.

IPX8 Waterproof System

Built-in IPX8 waterproof technology, the cordless automatic pool vacuum is super safe and reliable to clean your pool.

No hoses or booster pump required, save energy with every pool cleaning.

Enjoy your pool time with families

Low maintenance, low cost. Save your time and labor. You can now take back your free time and enjoy a cleaner pool without the rigorous labor of cleaning manually.

Easy to take it out from the pool

The package comes with a floating handle, you can easily take the pool cleaner out of the water.

Easy to clean the filter tray

The filter is big enough for normal cleaning, it traps and locks-in all sorts of dirt an debris. Also very easy to pop out and clean. Take off the filter tray and use a water pipe to clean it. Definitely save your time.

Selectively adjust nozzle angle base on different pool situation to control its running path. Fit for all shape pools

• 【Cordless Design&Long Running Time】: Leaving aside the shackles of the power cord, the KUPPET cordless automatic pool cleaner is equipped with a 7800mah lithium-ion battery, which can complete up to 120 minutes of work. It can work without connecting a cable to the power socket, thereby improving mobility. IPX8 battery waterproof design, please rest assured to use.
• 【Battery Detrction Technology】: Kuppet cordless automatic pool cleaner will stop alongside the swimming pool shore when the battery drained out or completing the working cycle by itself. And you just need to pull up the floating handle to let the pool cleaner go ashore. Simply plug it into any 110v outlet to recharge for the next cleaning. Need about 4-5 hours for full charging.
• 【4* PVC Brushes-More Efficient Cleaning】: Comparing to a similar automatic pool cleaner, KUPPET robotic pool cleaner possesses 4pcs PVA sponge roller brushes to provide twice the cleaning power, have stronger adsorption capacity and grip. Not only is the bottom of the pool, it can also clean your pool walls in all aspects and more efficiently.
• 【Auto Clean Setting】: KUPPET automatic swimming pool cleaner is controlled by the advanced intelligent computer program so after you set it up, you can free your hands. Schedule your Kuppet robotic pool cleaner to automatically clean using 3 settings- 1 hour, 2 hours and 3 hours which can thoroughly clean the bottom and four walls of the pool without supervision and continuously and carefully filter the pool water.
• 【2*Large-volume filter baskets】: Built-in large and easy access top loading filter basket traps, locks in dirts and debris leaving your swimming pool extremely clean, also the filter cleaning is very simple. Just need to pour out the garbage and clean it with water.

User questions & answers

Question:	Is this pool cleaner safe for vinyl liner pools
Answer:	You have to get the nylon sacs, and I put it under the debris bag it cane with, and it will pick up the dirt
Question:	What are the two foam cushions for
Answer:	I got mine prime in 2 days
Question:	Does this model have a beach entry sensor? That will reverse direction when the cleaner is climbing out of the pool via beach entry
Answer:	You have to buy the brush separate.
Question:	Can this be used on round vinyl above ground pool
Answer:	You can, but I just clean out the bag after every cleaning.

Product features

Kuppet Automatic Robotic Pool Cleaner

The robotic pool cleaner is a new type of highly efficient and energy-saving swimming pool cleaning robot. Through its advanced computer-controlled program, it can clean the pool walls and bottom automatically. At the same time, it filters the pool water and gets rid of suspended particles without replacing the pool water.