10 best troy bilt electric lawn mowers

Product description

Please review all product information to ensure that this product is compatible with your unit./p>

Before processing a product for warranty, it must be verified as the correct part by the OEM part number(s) and/or model number(s). If you have any questions or concerns, please ask.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Any specific models stated in the listing are potential matches only and not a guarantee of compatibility. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

Model and/or Sub-model

Spec and/or Type Number

Code and/or Serial Number

Year

Engine Horsepower

Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

-The ROP Shop Staff

• ELECTRIC PTO CLUTCH with High Temp Bearings, Billet Machined Pulley, Stainless Steel Rivets
• Electric PTO Clutch for Troy Bilt / Troy-Bilt 1772388 - Lawn Mower Engine Motor
• ID: 1", Pulley Diameter: 5 3/8"
• 1 Year Warranty From Manufacturer Defects (No Warranty On Installation Errors)
• NO RETURNS ACCEPTED ON INSTALLED CLUTCHES

Product description

Please review all product information to ensure that this product is compatible with your unit./p>

Before processing a product for warranty, it must be verified as the correct part by the OEM part number(s) and/or model number(s). If you have any questions or concerns, please ask.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Any specific models stated in the listing are potential matches only and not a guarantee of compatibility. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

Model and/or Sub-model

Spec and/or Type Number

Code and/or Serial Number

Year

Engine Horsepower

Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

-The ROP Shop Staff

• ELECTRIC PTO CLUTCH with High Temp Bearings, Billet Machined Pulley, Stainless Steel Rivets
• Electric PTO Clutch for MTD / Cub Cadet / Troy Bilt 917-04163A Lawn Mower Engine
• ID: 1", Pulley Diameter: 5 1/4"
• 1 Year Warranty From Manufacturer Defects (No Warranty On Installation Errors)
• NO RETURNS ACCEPTED ON INSTALLED CLUTCHES

Product description

Please review all product information to ensure that this product is compatible with your unit./p>

Before processing a product for warranty, it must be verified as the correct part by the OEM part number(s) and/or model number(s). If you have any questions or concerns, please ask.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Any specific models stated in the listing are potential matches only and not a guarantee of compatibility. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

Model and/or Sub-model

Spec and/or Type Number

Code and/or Serial Number

Year

Engine Horsepower

Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

-The ROP Shop Staff

• ELECTRIC PTO CLUTCH with High Temp Bearings, Billet Machined Pulley, Stainless Steel Rivets
• For Troy Bilt Troy-Bilt: 917-3389, 9173389
• ID: 1", Pulley Diameter: 6"
• 1 Year Warranty From Manufacturer Defects (No Warranty On Installation Errors)
• NO RETURNS ACCEPTED ON INSTALLED CLUTCHES

Product description

This is an O.E.M. authorized part. Fits in the popular models (but not limited to): 12ACC6S6709, 12A-B29V583, 12ABB22J756, 100, 12AQC6B9599, 11A-A21E515, 11B-A1S5599, 11A-B2A3515, 11A-A14E500, 11A-B29Q501, 11A-B29Q501, 11A-B29Q501, 11A-B2KB501, 11A-B0A9504, 11A-A24E500, 11A-A21B599, 11A-A21B599, 12AVB2BV766, 11A-A1BA583, 11A-B2A9504, 11A-B1BG590, 11AEB27Q563, 11A-A0KB501, 11A-A0KB501, 11A-A0KB501, 11A-A0KB501, 12AVB2M7059, 11A-B29Q590, 11A-B29Q590, 11A-B29Q590, 11A-B2A9504, 11A-54K3066, 11A-A04T565, 11A-A14R500, 12A-K2M7766, 11A-A0S5583, 11A-A0S5583, 11A-A14E516, 12A-B2M5563, 11A-A22L500, 11A-B29V583, 11A-A14E500, 11A-A24A500, 11A-A04E500, 11A-A09Q501, 11A-A22Q563, 11A-B2A9563, 11A-54K3066, 12ACC35S766, 11A-B2KB501, 11A-B0A9504, 11A-A24E500, 11A-B2A9504, 12AGA25S711, 11A-B1BG590, 11A-A14E500, 11A-B29Q501, 11A-B29Q501, 11A-B29Q501, 11A-B2A9504, 11A-A1BA583, 11AEB27Q563, 11A-A0KB501, 11A-A0KB501, 11A-A0KB501, 11A-A0KB501, 11A-B29Q590, 11A-B29Q590, 11A-B29Q590, 11B-A1S5599, 11A-A2BM711, 11A-A2BM711, 12A-A2BU711, 12A-A2BU711, 11A-A23O711, 11A-A23O711, 11A-A23O711, 12AVB2AQ711, 11A-A26M011, 11A-A26M011, 11A-A26M011, 11A-A26M011, 11A-B29Q711, 11A-B29Q711, 11A-B29Q711, 11A-B29Q711, 12AVB2A3711, 12AVB2A3711, 11A-B2RQ711, 11A-B2RQ711, 11A-B2AQ711, 12AVB26M011, 12AVB26M011, 12A-A26M011, 12A-A26M011, 12A-A26M011, 12A-A26M011, 12ABD3BZ711, 12ABD3BZ711, 12AVB2RQ719

• This is an O.E.M. authorized part
• Fits various MTD models
• OEM Part Number 731-7131
• This is a MTD replacement part
• See product description below to determine if this unit fits your model.

User questions & answers

Question:	Does this fit Cub Cadet SC 100 with 159 cc engine
Answer:	Your OEM part number is MIU13815 and it does not cross to this particular John Deere number but it does to other John Deere gas caps.it appears to be about the same size tank but I can not guarantee it will fit.
Question:	Will this fit a troy bilt db
Answer:	If your B&S filler neck is threaded, this should fit.
Question:	Will this fit a mtd white 54 inch cut
Answer:	Should
Question:	will this fit a troy built
Answer:	I have J type carriers and my 'homemade' bar works fine. It's just a way of getting the boat up to the carrier level one end at a time. I have to put the boat into the J carriers and then flip it on its side.

Product description

Greenworks, 13 Amp, 21-Inch 3 in 1, Rear Bag, Mulch or Side Discharge, Converts Easily from Rear Bag to Mulch or Side Discharge Electric Lawn Mower, Model # 25112

• Durable 21 Inch Steel Deck
• Powerful 13 Amp Motor
• 3 In 1 (Mulching, Side Discharge, and Rear Bag)
• 7 Position Single Lever Height Adjustment
• Foldable Handles For Compact Storage
• 10 Inch Rear / 7 Inch Front Wheels
• 4 Year Tool Warranty Protects Your Investment
• Extension Cord Not Included

User questions & answers

Question:	I have a 100' cord, i believe it is stamped inside in tiny letters as being 15awg. it also seems to say 3x15awg. also, does the voltage not matter? it
Answer:	Sure. I actually bought a much smaller one, but metal is metal. You will need a hot pad or some other kind of insulation to handle the handle, however.
Question:	Is this mover corded and a mulching mower with a rear bagger. I also wanted a 13 amp power supply and corded. The handles they fold for easy storage
Answer:	It is constructed of stainless steel. I suppose so but it would become very hot. I wouldn't use it that way but I guess you could.
Question:	How much cable is supplied with the mower
Answer:	Probably not, induction heating requires ferrous metal and stainless steel typically does not have enough iron in it to create the resistive heating. SS cookware can be tested with a magnet to see if it will work. https://en.wikipedia.org/wiki/Induction_cooking
Question:	Why is this one cheaper than the smaller, lower amp model
Answer:	I use a different brand, same arrangement. Works well to froth milk to cream. I would not attempt to whip cream That's just another level. Though tall, narrow bowl is the rule for hand whipping cream as that helps force aeration. I just don't think the screen would work as well as a whisk to get the stiffer peaks you want for whipped cream.

Product description

When you need to give some definition to your lawn elements or bury wire, the Worx 12 Amp Electric 7.5” Lawn Edger/Trencher will do the job. Powerful and easy to use at only 14 lbs, so you can easily push it along. Cleaning out clogs and replacing the blade is also easy, just make sure you always unplug it first. The blade is made of heavy-duty steel with serrated edges, which makes for clean, straight lines and has a wear indicator that shows when it needs to be replaced. It’s easy to assemble once you get it, so you’ll be out making your lawn and garden beautiful and more defined in no time.

• POWER LIKE THE PROS: The 12 Amp motor spins the 7.5” blade fast and deep at 4700 revolutions per minute, giving you professional-looking lines and edges
• 3 DEPTH ADJUSTMENTS: Cut down at 1”, 1-1/4”, 1-1/2” depending on the task at hand
• CUTTING LINE INDICATOR: Stay on the straight and narrow with the cutting line guide—you’ll notice a difference when you’re done
• ADJUSTABLE SHAFT: Users of any height can find a length and comfortable position that works for them with the adjustable shaft and D-grip handle
• DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX: WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• 3-YEAR WARRANTY: We know this edger/trencher will last for years, now you do too

User questions & answers

Question:	Work in 120v or 220v
Answer:	The WG896 is operated on a 120V.
Question:	Does it need to be put together
Answer:	There is a minimal amount of assembly. It's a matter of attaching the handle however the instructions are clear.
Question:	I need a replacement blade for this, where can I get this
Answer:	The replacement blade for the Black and Decker Edger works just fine and you can always find them at Home Depot.
Question:	does this Worx WG896 come with an electric cord
Answer:	A No. 12 wire, 2- conductor with ground cord is necessary. It can be a max. of 100 ft. long. Lowe's has what is needed at the best price (around $20).

Product features

12-Amp Motor

Slice through the ground with the powerful, durable, and consistent 12-Amp motor. For comparison, some chainsaws run on a 12-Amp motor, so there’s plenty of power here.

3-Position Blade Depth

1”, 1-¼”, 1-½”, for edging, edging like you mean it, and trenching. Clearly define landscaping elements, sidewalks, deck edges and the like with the 7.5” blade. Or bury wires and invisible fencing.

Cutting Line Indicator

For clean, professional-looking results, the cutting line indicator shows exactly where the blade is digging in. Just line it up and go.

Adjustable Shaft

So tall and short users and everyone in-between can find a position that is comfortable to work in.

Lightweight, Easy to Use

This is a heavy-duty piece of machinery but at only 14 lbs you can easily maneuver it along rounded and tricky to edge stretches.

Professionally Landscaped Look

Regular edgers do the job, sure, but this 2-in-1 Edger/Trencher gets deeper, with a 7.5” serrated blade spinning at 4700 revs/min, for deeper, more defined lines along your lawn.

Product description

This sleek, 14” 40V Lawn Mower with Intellicut and Mulching Capabilities is packed with technology and doesn’t skimp on power. With two of our 20V 4.0 Ah batteries giving it 40V, you get double the runtime and double the efficiency. Intellicut is our patented torque tech that lets you dial up the power when you get into thicker grass and then dial it back down to conserve battery when the grass gets easier to manage. It’s a powerful but energy-efficient mower. And that’s just where the benefits start. Gas-powered mowers are messy, costly, and can wake up the whole block. Worx battery-powered machines are clean, both to operate and for the environment, and cost-effective because electricity costs less than gas. They’re also much quieter by comparison, and start with the touch of a button, not the repeated yank of a cord. This mower weighs in at only 29 lbs and has a 14” cutting deck that’s easy to zip around landscaped features, yet wide enough to cut down on the passes you’ll have to make on your lawn. The 6-positon cutting height ranges from 2.5”- 3.5”. The 4Ah batteries give you up to 1/8 acre cut on a single charge. It’s a better mower for today, tomorrow, and years to come.

• [6 HEIGHT ADJUSTMENTS] A single lever lets you set the height you want to cut your lawn, depending on the season, or just your preference
• [INTELLICUT] feature provides torque on demand for tougher conditions
• [SAME BATTERY, EXPANDABLE POWER] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• [MULCH OR BAG] This 2-in-1 mower lets you bag it up, or mulch your grass back into the ground, it’s up to you
• [BATTERY METER] The on-board battery charge indicator lets you know exactly how much juice you have left before you need to head back to the garage
• [FULL-BAG INDICATOR] The plastic-topped collection bag has a capacity of .85 bushels, and the full-bag indicator lets you know when it’s time to empty out
• [DUAL-PORT CHARGER] This mower runs on two batteries at a time, so we threw in a dual-port charger so you can fill them both back up faster
• [INCLUDES] 40V Mower, Two 20V 4.0Ah Batteries, 2A Dual-Charger, .85 Bushel Collection Bag, Mulch Plug

User questions & answers

Question:	Is the dual charger a smart charger or does it need to be monitored via an external timer
Answer:	Charger is a Smart Charger and with it I can now charge my other Worx 20Volt Batteries used on my Worx Pressure Sprayer & Worx Leaf Blower. When batteries are charging green led light flashes on each battery. When fully charged led is solid light.
Question:	can this batteries be use in the string timmer
Answer:	Yes! These batteries can be shared with all 20v Worx tools.
Question:	Does it come with a bage
Answer:	With a bag (grass catcher) ? Yes.
Question:	Does this mulch or is it only used with the bag
Answer:	This comes with the mulch attachment already installed. I have never used the bag because this mower mulches finely and unless your grass is extra long you won't see any dried grass that needs to be raked up. I mow my grass once a week and to the lowest setting which is about a little over an inch.

Product features

Set Your Cutting Height

With the easy adjustment lever, you can pick from 3 heights. So depending on the season, or just the look you want for your lawn, you have options.

INTELLICUT—Torque on Demand

Thicker grass? Just turn the knob and you’ve got more torque to power through. Then dial it back down when you’re clear to save on battery.

Charge Indicators

So you always know exactly how much battery power you have left.

20V + 20V = 40V

With 40V you get twice the run-time and gas-like performance, except you don’t have to pay at the pump anymore when you just want to cut your grass.

No More Gas

Battery-powered mowers are cost-effective, because you’re done buying gas. They smell better, are cleaner, and friendlier on your local environment.

Lightweight and Compact

Easy to maneuver and easy to store. There’s plenty of power in this mower, but Worx engineers still made it easy to handle. It’s only 29 lbs. That’s light for a mower.

Product description

Genuine replacement electric starter used on select single cylinder L-Head engines; This OEM part ensures proper fit and performance to maintain the life of your Briggs & Stratton engine.

• O. E. M. authorized part
• OEM Part Number 593934
• Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts.

User questions & answers

Question:	Will this work on a 2003 Briggs and Stratton intek 18.5 horse
Answer:	I wish! It scared my cat so much, he ran from the toy. So I had to give it away to a shelter. I could find no way to turn off the sound.
Question:	will this fit BS model no. 44Q777-1039-B
Answer:	It has a button battery in the mouse, once you pull out the plastic sheet on the back, the mouse would squeak and the eyes would flash when you wobble it.
Question:	Works on a poulan pro pp19a42 (19hp
Answer:	I don't need to
Question:	Does this fit John Deere 125 lawnmower
Answer:	It is, my cat's play with it all the time and so far so good.

Product features

Briggs & Stratton Starters

Briggs & Stratton genuine parts are specially designed to exact Original Equipment Manufacturer (OEM) standards. Not only are Briggs & Stratton genuine parts assured to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations and helps maintain valuable warranty coverage.

Problems with Starter

A faulty small engine starter can be caused by many issues including a dead battery, faulty electrical connection, corroded terminals, defective solenoid or starter switch, worn or sticking brushes as well as other reasons for a replacement.

How to Replace a Starter

Always disconnect the spark plug before working on engine. In most cases you will need to remove the air filter and engine housing to locate the starter. Then unscrew the wire attached to the starter and carefully loosen mounting bolts. With the correct new starter, mount to engine and re-attach wire.

Starting Tips

Pull start engines should start within three pulls. For 12V engine starters, use short starting cycles (five seconds maximum) and wait one minute between starting cycles.

General Lawnmower and Small Engine Maintenance

Are you changing your oil, replacing your air filter and adding fuel stabilizer to your outdoor power equipment as frequently as you should be? General engine maintenance will help your engine last longer and run better. Using genuine parts on your Briggs & Stratton engine will make sure it fits right and runs the way it’s supposed to.

Product description

This genuine 500cc Briggs & Stratton single cylinder engine offers dependable power for your equipment needs. With a power rating of 17.5 horsepower, this engine features a premium Dual Clean air filtration system, electric starter, and maintenance-free Magnetron electronic ignition. With a manufacturer limited warranty of 2 years consumer use / 1 year commercial use, Briggs & Stratton provides power that you can trust. This engine includes a Dura-Bore cast iron cylinder sleeve for extended life. This engine includes an installed muffler. This engine includes a 9 amp charging system.

• Cast iron cylinder sleeve and dual element air filter for extended engine life
• Float carburetor for consistent, easy starting
• Patented linear balancing system provides smoother performance
• 9 amp/electric start only
• CARB Compliant

User questions & answers

Question:	Will fit a craftman model
Answer:	Very easy......just plug it in a 110v outlet, then push the start button. The snow blower starts right up.
Question:	Will this work in a craftsman lt1000 mower body
Answer:	Yep.
Question:	Will this replace a Model # 31C707-0230-E1 in a Craftsman Tractor without any modifications
Answer:	Not sure who uploaded the pic's but no they don't Bestway is not to go by pictures use your model and type numbers off your engine and get the correct part number that will insure the exact correct fit
Question:	will this replace model 31f707 o112E
Answer:	The fuel cap for tank part# 799863 is a CIC cap part# 799719 w/tether

Product features

Repowering your equipment with Briggs & Stratton

Briggs & Stratton engines are the perfect small engines to power the equipment you use to maintain your home and yard, like a garden tiller, log splitter, pressure washer, water pump or portable generator. Count on our versatile and durable utility engines to perform consistently and start easily, no matter how tough the job.

Engine Selection

Match the engine’s performance and cost to your specific application to get the optimum performance at an affordable price. That means better value for you.

• Vanguard OHV (overhead valve) engines are maximum performance, cast iron sleeved engines. Select for continuous heavy duty applications.
• Professional Series, Commercial Series (Industrial/Commercial) engines are cast iron sleeved. Select for medium duty commercial, industrial and rental use.
• Intek and Powerbuilt engines are aluminum cylinder bore OHV engines. Select for general consumer use.
• Standard engines are aluminum cylinder bore, side valve engines. Select for general consumer use.

Engine Installation

It is important to maintain the original engine’s size, starter type and position, fuel tank location, fuel line routing, muffler location, exhaust direction and muffler accessories (i.e., deflector, spark arrester, etc.). Reinstall all guards, shields and safety devices. Replace missing, worn or damaged parts.

Vertical Crankshaft Engines

Compare the overall engine size to avoid possible mounting interference.

• Match the crankshaft

1. A - Diameter
2. B - Height (distance from base to crankshaft center line)
3. C - Length (distance from oil seal/cover’s mounting face to end of crankshaft)

• Match the crankshaft type, i.e., keyway, tapered or threaded
• Match the crankcase cover’s tapped holes for mounting accessories (if applicable)
• Match the base mounting dimensions and bolt hole spacing

Engine Maintenance

Regular lawn mower maintenance helps prevent problems, plus lengthens the life of your lawn equipment. But even with plenty of TLC, normal wear and tear from hours of mowing the lawn increases the chances of hitting a glitch from time to time. We recommend using our maintenance kits to ensure your engine is running smoothly all season long.

Engine Replacement Assistance

If you are unsure which replacement engine can be used for your equipment, or would like to know if you can upgrade your existing engine, please feel free to ask questions by contacting Briggs & Stratton for assistants. Information Needed for Engine Replacement Assistance:In order to assist you with locating a replacement engine and short block, include as many engine specifications as you can:

• If replacing a Briggs & Stratton manufactured engine, provide the engine's complete, Stamped Engine Model, Type, and Code numbers.
• If not a Briggs & Stratton manufactured engine, provide the engine brand, power rating, and model number. (ex. Tecumseh 10 HP Model HMSK 22-22222d).
• Equipment information including brand name, type and model numbers (ex. John Deere Model 316 lawn tractor).

Product description

This is an O.E.M. authorized part. Fits various MTD models. OEM Part Number 747-1161A-0637. The product is manufactured in US.

• This is an O.E.M. authorized part
• Fits various MTD models
• OEM Part Number 747-1161A-0637
• This is a MTD replacement part

User questions & answers

Question:	How long is the bar? I'm looking for a 16in bar. Will this work
Answer:	This bar measures about 17 1/2”. This will work if your measuring 16 “ between the two handle bars on the mower.
Question:	Will this fit a Troy bilt mower
Answer:	Yes, BUT qualified... I made IT fit by carefully spreading the ends a little wider (about a half inch each). Why??? Well, the part as made will fall thru the handle so... it just needs to be manually adjusted. I was in no mood to screw around ordering the perfect fit part. I figure non-company part parts are like hand-grenades, I.e., close enough is good enough. The part is working fine NOW!