10 best murray lawn edgers

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This belt guard (part number 336631MA) is for edgers. Belt guard 336631MA protects the blade drive belt on the edger. Wear work gloves to protect your hands when installing this part.

• Sold on Amazon

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This half pulley (part number 305634MA) is for edgers. Half pulley 305634MA combines with an identical half pulley (same part number) to create the full drive pulley that rotates the drive belt on the edger. Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.

• Sold on Amazon

Product description

The attachment should fit attachment capable trimmers of the following brands: Ryobi, Greenworks, Toro, Troy-Bilt, Troy-Bilt XP, Craftsman, Cub Cadet, Murray, Poulan.

• 7.5 INCH DUAL STEEL BLADE: Hardened steel blade trims between sidewalks, curbs, and landscape beds to give a clean, manicured look.
• LARGE GUIDE WHEEL: Keeps you on a straight path for easier edging. Stay in firm control during yard work.
• ADJUSTABLE BLADE DEPTH: Can adjust blade depth up to 25-inches for more precise edging and cutting. Find the depth that works best for you. Battle tested and battle ready for even the toughest of lawn care tasks.
• WARRANTY: 2-year limited.
• COMPATIBILITY: Fits Attachment capable units from Troy-Bilt, Remington, Craftsman, Yard Machines, Yardman, Snapper, Bolens, Murray, Ryobi, Greenworks, Kobalt and most other major brands.Powerhead coupler accepts 1 inch diameter tube Drive shaft connector: Square shape .205” Female Attachment drive shaft: Square shape .200” across flats. Check description below for all compatible models.

User questions & answers

Question:	Would it fit ryobi cs
Answer:	This fit my husqvarna 128ld straight shaft trimmer. It has the square drive cable and works with other brands of other square drive cable trimmers.
Question:	Will it fit the weedeater brand name of trimmers
Answer:	If it has the square cable drive for the attachment it might work
Question:	Would this work with a Craftsman edger
Answer:	Hello there! Thank you for reaching out. This TrimmerPlus attachment will fit all attachment-capable Craftsman units. Best, MTD Team
Question:	Is there a difference between the 2017 and 2018 editions? The 2017 is a bit cheaper
Answer:	I can’t really tell a difference other than the packaging. I have purchased both and replacement blades which are also the same. I am very happy with mine. I hope this is helpful to you.

Product description

Replacement For OEM Parts Number(s):



For MURRAY

• 037X96

For Murray

• 037X96MA, 37X96, 37X96MA

For Oregon

• 75-964

For Stens

• 265-024

For Additional Replacement MPN(s):

• 230-6724, 7-07972, B1MU96

Fits OEM Models:



For Murray Models

• 461000x71A, 461000x8A, 461001x68A, 461004x92A, 461004x92B, 461005x68A, 461007x92A, 461007x92B, 461008x692A, 461008x92A, 461018x99A, 461018x99B, 46102x6A, 46102x6B, 46103A, 46103B, 46103x50A, 46103x50B, 46103x50C, 46103x71A, 46103x92A, 46104x14A, 46104x8A, 46104x8B, 46104x8C, 46104x8D, 46106x89A, 46106x89B, 46107x92A, 46108x89A, 461603x48A, 461604x99A, 461605x99A

Please Refer to Owners Manual Or OEM Manufacturer for Complete Compatibility Verification

• Replaces OEM Part Numbers: Murray 037X96MA, 37X96, 37X96MA
• Compatible with Models: Murray: 461000x71A, 461000x8A, 461004x92A, 461004x92B, 461007x92A, 461007x92B, 461008x692A, 461008x92A, 461018x99A, 461018x99B, 46102x6A, 46102x6B, 46103A, 46103B, 46103x71A,
• Optimize Your Mowers Cutting Power and Ability
• Width: 1/2" (0.5)
• Length: 88 1/2" (88.5)

User questions & answers

Question:	Is this belt for the mower deck or the transmission drive
Answer:	Yes, about the watch, it can read the time and date.

Product features

8TEN Belt 810-CBL2348T

• Includes: Drive Belt
• Compatible with the following brands: John Deere
• Compatible with the following models: E110, E120, E130, E140, E150, X110, X120, X125
• Replaces for the following OEM MPN's: GX20006

Product description

Getting a professional looking lawn without the back pain has never been easier. Use the Southland edger attachment to transform your wheeled string trimmer mower into a powerful edger. Adjust the depth on the 8 in. Straight blade to help you create clean edges for your landscaping, driveway, & sidewalks. The 4.75 in. Dual wheels provide easy rolling & precise edging. The centrifugal clutch stops the edger when the unit is idling. The Southland add-on edger for the Southland wheeled string trimmer mower (model # Swstm4317) does everything a regular edger can do, except take up space & put a dent in your wallet. This edger attachment is the perfect accessory to put the final touch & edge to create a well-manicured look for your lawn.

• The adjustable 2.5 in. Max edging depth creates a tidy and attractive edge around flowerbeds, pathways and patios.
• Adjust the depth on the 8 in. Straight blade on the Southland edger Attachment to help you create clean edges for your landscaping, driveway, and sidewalks.
• The 4.75 in. Dual wheels provide easy rolling and precise edging.
• The Replaceable Steel wear plate protects the bottom of the Southland edger Attachment from damage during use.
• The centrifugal clutch stops the edger when the unit is idling.
• The Southland add-on edger Attachment for the Southland wheeled string trimmer mower (model # Swstm4317) is the perfect accessory to put the final touch and edge to create a well-manicured look for your lawn.

User questions & answers

Question:	How do I contact seller? I have had this a little over a month and used it 5 times and the piece on top of the head that holds the string broke
Answer:	Please contact our product services for assistance. 800-737-2112.
Question:	Is there a shut of valve
Answer:	I don't think it has a fuel shutoff valve and I wouldn't expect it to.
Question:	Can you adjust the handle so that taller people don't have to hunch over to use it
Answer:	It is not adjustable, beyond the point of a 6 footer. At 6'2" I do have to hunch a little. That said I am still overall very happy with the operation of this machine.
Question:	What does it weigh
Answer:	It's not very heavy at all. I bought one of these last year and thought it was going to be great. It started once and has not run since. I should have sent it back.

Product description

Fits 30" Murray Rear Engine Rider; Models: 2466A & 24661A. Mulching Blade.



Replaces:

• MURRAY 56210
• MURRAY 56217

Dimensions:

• LENGTH: 30"
• WIDTH: 2-3/4"
• C. H. DIA: 27/32"
• THICKNESS: 0.1500"
• CUT DIRECTION: RIGHT

• Fits 30" Murray Rear Engine Rider; Models: 2466A & 24661A. Mulching Blade.
• FITS MODELS - MURRAY: 2466A, 24661A, 30576x10B, 30577x31A, 30577x31B, 30577x8A, 30577x8A
• REPLACES OEM - MURRAY: 56210, 56217
• WIDTH: 2-3/4"; CUT DIRECTION: RIGHT; LENGTH: 30"; THICKNESS: 0.1500"; C. H. DIA: 27/32"

Product description

Connect the edger attachment to any Snapper xd 82V Max string trimmer to sharpen and clean up your lawn in a breeze for seasons to come. This edger features an 8. 66 in. blade length with plastic guard for added safety and 1-inch steel shaft with Cast Aluminum joints and gear housing. Compatible with the Snapper XD String Trimmer.

• 8. 66 in. blade length with plastic guard for added safety
• 1-inch steel shaft with cast aluminum joints and gear housing
• Over 100-hours of durability (under test)
• Connect the Edger Attachment to any Snapper xd 82V max string trimmer
• Power source type: Battery Powered

User questions & answers

Question:	Is this compatible with the troy-built tb22 gas trimmer
Answer:	I don't know the weight but we had an older chi hairdryer that wasn't really too heavy and this thing feels like nothing compared to the older one. Frankly it feels like nothing compared to any hair dryer I've ever held. Super lite
Question:	Will this extender work with the snapper 82v pole saw? i'd like to know if i can add this extension to sanpper's pole saw before purchasing
Answer:	Based on my kitchen scale, the part you hold weighs 12 oz. With the long cord, it weighs 1.5 pounds. (This is without diffuser.)
Question:	Does it fit on a Echo rig
Answer:	yes Collapsible handle there are 2 heat settings on the dryer and the flat iron goes up to Heat up to 392°F for Internal & External plates
Question:	Will this work on a gas trimmer
Answer:	Not sure maybe 6” in

Product features

Snapper XD Cordless String Trimmer Attachments

The four available attachments include a: Brush Cutter, Pole Saw, Cultivator and Hedge Trimmer, allowing you to expand the String Trimmer from one product to four. In addition, a 2.13 foot extension pole gives the hedge trimmer or pole saw attachment additional length for tall hedges or limbs.

All attachments mentioned are compatible with the Snapper XD SXDST82 String Trimmer.

Brush Cutter

Remove unwanted brush and overgrown weeds

Cultivator

Prepare flower beds and gardens with ease.

Hedge Trimmer

Easily keep your hedges and bushes under control.

Pole Saw

Prune and trim tree limbs.

Product description

Murray V4L Velt

• Genuine OEM Murray Belt
• This part replaces obsolete part #: 32668
• The belt links the motor's drive shaft and the blade's quill assembly. This item allows the blade and the drive shaft to rotate in unison.
• This part is compatible with certain Murray Edger models including: 77236000NB, 77232100NC, 77233000NA, 77235000NB, 77236000NA, 536.772321, 536.77235, EV3550x4NA, 536.772342, EV3850x4B, EV3850x4C, EV3850x4NA, EV3550x92A, EV3550x92NA, EV3850x4A, 13051x81A, 13052x10A, EH3550x4A, 13052X6A
• Please Note: May not fit all specs of above models listed, please consult owner's manual for proper part number identification and proper installation

Product description

Please check the sizes carefully before purchase

• Fits STHIL HUSQVARNA ECHO HOMELITE McCulloch Poulan Sears lawn mower trimmer brush cutter edger?-.
• Diameter: 4.0mm
• Length: 10 meter
• Please check your starter rope sizes carefully before purchase

User questions & answers

Question:	Is this the correct size for my honda gc
Answer:	I can't turn just the second hand, only the hour and minute hands. The second hand operates fine but can't be adjusted.
Question:	Will this be strong enough for 400cc quad
Answer:	Hello, It's the same as the picture, not turquoise. Thanks for coming our store.
Question:	What is the Pull strength
Answer:	Hello, welcome to our store. The watch comes with a watch box. You could directly send the watch as a gift.
Question:	Will this work for walking my giraffe downtown
Answer:	Thanks for your question. It can show the date and time

Product description

Stens carries a wide variety of oem / aftermarket replacement parts for small engine outdoor power equipment. fits 40-inch cut.

• Length 20-5/16-inch
• Center hole 13/16-inch
• Width 2-1/4-inch
• Thickness .134-inch

Product features

Stens

Stens offers quality parts that keep outdoor power equipment running longer and performing better.

Stens replacement parts have become a favorite among lawn and landscape professionals thanks to exceptional performance.

Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Stens product packaging.

Working with people who keep lawns and landscapes beautiful

Stens works in partnership with professionals who make a living maintaining outdoor landscapes, so they understand the need of the industry.

Stens has been in the outdoor power equipment business since 1970, building a reputation for supplying parts that work as hard as you do.

The depth of Sten's inventory is extensive

The Stens product line represents replacement parts for more than 200 brands in the marketplace.

You'll find quality-made parts for virtually every make, model and type of outdoor power equipment.

Quality control measures on every part

Choosing a quality Stens product is a wise decision because equipment downtime is costly to you in lost revenue.