10 best mulch machine chipper

Product description

This is the GreatCircle LCE01, 7 HP Heavy Duty 212cc Gas Powered Wood Chipper/Shredder for Lawn and Garden. This 3 in 1 multi-function capable Wood Chipper design comes with a top hopper for volume chipping; Side chute for small branch and limb; a shredder and access to back vacuum inlet for leaf loading w/ the purchase of a Vacuum Kit. This Wood Chipper has a 3" max Wood Diameter chipping capacity that can handle tough jobs with without a problem and 1/2" shredder capacity. It features a powerful recoil starting 7 HP/ 212cc gas engine (87+ unleaded NO ETHANOL RECOMMENDED) (ENGINE OIL NOT INCLUDED,MUST ADD OIL BEFORE USE).

• MULTI-FUNCTION CAPABILITY; This 3-in-1 Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1 when using the top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX branch/limbs, or the attachable leaf vacuum for mulching
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• EFFICIENT DESIGN; Hookup your favorite: ATV, lawn mower or small tractor, for easy transportation with a Tow Bar Kit (SOLD SEPARATELY) and use the vacuum inlet for easy leaf mulching with a Vacuum Kit (SOLD SEPARATELY)
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), pertrified wood or vines

User questions & answers

Question:	Where can I get blade replacements for this chipper
Answer:	Not tried privet hedge, did very well with fir tree clippings and branches. The branches handled were over 1.5IN and it just chipped away. Very pleased with this purchase, not the cheapest shredder but works extremely well.
Question:	What is the assembly involved for this piece of eqpmt
Answer:	This device is pretty strictly a chipper and does not do any shredding. Depending on the size of the mulch/nuggets it would definitely chip them down in to finer pieces, but you'd really need to control how many you put in at a time. Also there is an adjustment to where you can tighten it down to chip smaller pieces, but you'll just have to experiment to see what works best and gets you the smallest chips without clogging/stopping the device.
Question:	Does it come assembled
Answer:	Use a 16 gauge, 3 prong outdoors extension cord.
Question:	whats the difference between a 850 & 950 engine
Answer:	Dear customer: This shredder works on Bamboo stalks, but it depends on its size and dryness. The dry wood turns into sawdust basically, the more wet wood will create larger pieces – The combination of dry and more wet wood makes the best chipped output mixture. Also bear in mind, do NOT use fresh wood that is still green – it needs to dry out for a few days otherwise it can become gummy in the shredder and ruin the mechanism/blades. You can’t do big branches over 1.77″ – so large logs won’t go in – don’t even try, and you can’t get them into the slot anyway. You will know what you can put in based on the hole size at the top slot. If you have branches that have offshoots going in all crazy directions, clip those off so that they don’t cause issues with the chipper sucking in the branch. The main pieces should be fairly straight to go down easily. Hope this answer will help you and thanks for your question！

Product description

Turn 11 bags of leaves and debris into 1 with the 13 Amp Electric Leaf Mulcher. A whole afternoon’s worth of work can be chopped down into a manageable load, instead of dragging a dozen+ bags to the curb. This tool features a clean air motor cooling system, enabling it to run at peak efficiency and keep mulching up to 53 gallons of leaves per minute. Its 13” cutting diameter is supported by an easy to change string system, so you’ll always have sharp line. Easy to use, easy to maintain, easy to store, it’s lawn clearing made easy.

The WORX WG430 Leaf Mulcher is the all-in-one solution to an annual problem: piles and piles of leaves in the yard. It smartly disposes of heaps of leafy yard waste in a few simple steps, turning hundreds of gallons of rotting leaves into vitamin-rich, organic mulch that's a perfect fertilizer for your flowerbed or garden. The WORX Flex-a-Line bladeless mulching system uses normal, heavy-duty grass trimmer line instead of dangerous metal blades to easily and safely mulch through leaves and debris.

The WORX WG430 Leaf Mulcher At a Glance: Powerful 13 Amp motor generates 8,500 RPM Easy, tool-free assembly Mulches up to 53 gallons of leaves per minute Ultra compact for storage Disposes of leaves and debris straight into bags Ideal source of fertilizer Dust-reducing, clean-air motor cooling system

Mulcher components nest for easy storage. View larger.

Universal bag holder enables one-step mulching and disposal. Click for more features.

Reduce dust and exhaust with patented clean-air cooling system. View larger.

A Lean, Green, Mulching Machine

Shredding leaves with a traditional gas shredder/mulcher can disturb the environment with noxious air and loud noise. Thankfully, with the electric WORX Leaf Mulcher, you can put the 'green' back in 'green thumb'.

Showcasing a powerful 13 Amp motor that delivers 8,500 RPMs, the WORX Leaf Mulcher will reduce a mass of dead leaves and twigs to 1/11th of its original size. That means you won't be lugging 11 bags of whole leaves to the curb for distribution or disposal--instead, you'll only have to worry about a single bag.

With the WORX Leaf Mulcher's 13-inch cut diameter and oversized mouth, you can mulch up to 53 gallons of leaves per minute. Acres of dried leaves can be collected and pulverized into manageable mounds of mulch in practically no time at all.

Create Mulch and Compost

It is estimated that almost 25% of the urban waste stream is made of yard waste and debris. In the fall, it can account for more than 60% of what flows into your local landfill.

The WORX Leaf Mulcher actually transforms your yard's dead leaves and debris, which would normally end up in a landfill, into vitamin-rich mulch and compost that can be recycled into your garden or flowerbeds.

Shredded leaf mass furnishes nutrients that assist in new plant growth during the growing season. Furthermore, mixing mulch into your garden and flower beds will aerate the soil and encourage new growth. Additionally, leaf mulch will increase water retention in the soil, reducing watering time and saving money.

Compact, Versatile, and Easy to Use

At less than 20 pounds, the WORX Leaf Mulcher features a compact design, in which the disassembled parts nest neatly together for convenient off-season storage on a shelf in your shed or garage. Setup takes only a few minutes, with absolutely no additional tools required!

In addition, the mulcher features a dust-reducing clean-air motor cooling system. Air and mulched leaves are separated through an external cooling air intake and exhaust to significantly reduce dust generation.

For further convenience, The WORX Leaf Mulcher's safe Flex-a-Line bladeless mulching system features tool-less cutting line replacement and a universal bag holder that accepts both paper and plastic bags. To top it off, an oversized on/off switch allows for easy, hassle-free operation.

The WORX heavy-duty Leaf Mulcher is the one machine that will end hours of misery once and for all and will make fall cleanup fast and easy!

What's in the Box

WORX WG430 Leaf Mulcher, 24 replacement lines, and one universal bag holder.

Tool-free locking system enables easy assembly and storage.

From the Manufacturer

The new Worx leaf mulcher makes collecting leaves easier, quicker and leaves your yard tidier. By simply dropping your leaves into the large feed hole they are mulched to 1/11th their size and drop right into a bag you fit under the unit. Its unique design accepts both plastic and paper bags and delivers an exceptional high mulch efficiency rate of 53 gallons/minute. This is achieved with the safe flex-a-line bladeless mulching system, offering the added benefit of tool-less cutting line replacement. Assembly is also tool-less and coupled with its compact design allows for convenient, easy off-season storage in your garage or shed. The design incorporates a dust reducing clean air motor cooling system and an oversized on/off switch for ease of use. The 13 amp motor delivers 8500 rpm and accommodates a 13-Inch cut diameter all in a package that weighs only 20 lbs. The WG430 comes with 24 replacement lines and 1 universal bag holder.

• 53 GALLONS/MIN: That’s right, the 13.0 Amp motor mulches up to 53 Gallons of leaves per minute
• RIGHT INTO THE BAG: Disposes of leaves and debris into a bag you can attach beneath (bag not included)
• 11:1 MULCH RATIO: That’s 11 bags chopped down into 1, all due to the innovative blade-less Flex-a-Line mulching system
• STURDY YET PORTABLE: At 20 pounds, this tool is substantial and stays in place during use, but isn’t so heavy that you can’t move it around the yard easily
• DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX: WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• EASY ASSEMBLY: Putting it together is a snap and requires no tools. And it’s designed that way so you can just as easily disassemble it for storage
• INCLUDES: 13 Amp Leaf Mulcher, Cutting Line, Bag Support Ring

Product features

Clean Air Motor Cooling

This patented tech significantly reduces the dust that is typically generated during the mulching process by utilizing an external air intake and exhaust system.

53 Gallons of Leaves per Minute

That’s right, this bladeless mulcher can chop up a lot of leaves! Blow or rake up all the leaves in your yard and stuff them into the mulcher.

11:1 Mulching Ratio

Turn 11 bags of leaves or debris into just 1 bag. This mulcher features the Flex-a-Line system, which uses heavy-duty string trimmer line to chop leaves instead of dangerous blades.

Tool-free Assembly

It’s easy and quick to put together, and it’s just as easy to take apart and store for the offseason. Each of the parts nest into one another, so they take up hardly any space on a shelf.

Drag Fewer Bags to the Curb

Turn 11 bags of leaves, twigs, or debris into just 1 bag. You can take acres worth of leaves and reduce them into a much more manageable task. Then you only have a couple of bags to dispose of. Or you can reuse that mulch in gardens and flower beds.

Makes Yard Work Easy

Standard plastic yard work bags or reusable paper bags slide right over the stand, the mulcher is placed on top, and the funnel locks into place. All you need to do is start feeding leaves through the top into the Flex-a-Line system that chops them up into 1/11th of their size.

Product description

This SuperHandy Ultra Heavy Duty Wood Chipper Shredder & Mulcher has a RATO 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine. Includes a top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX small branch/limbs, 3 in 1 Capable Multi-Function, 3 Years Warranty. Fuel this Wood Chipper with 87+ unleaded gasoline (NO ETHANOL recommended) with a max capacity of 0.7 gallons & fill the engine with Oil as recommended in the manual. The Universal Vacuum Kit can be used with GreatCirlceUSA, Landworks & SuperHandy Wood Chippers (with the correct adapter piece depending on the model). The Universal Tow Bar Kit can be used with various Wood Chipper brands like: GreatCircleUSA, Landworks, SuperHandy, Harbor Freight, Tazz & Earthquake Wood Chippers Shredders (WOOD CHIPPER NOT INCLUDED)

• MULTI-FUNCTION CAPABILITY; This 3-in-1 Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1 when using the top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX branch/limbs, or the attachable leaf vacuum for mulching
• UNIQUE DESIGN; The Slanted Housing design reduces jams, unlike other chippers; Hookup your: ATV, lawn mower/small tractor, for easy transportation with a Tow Bar Kit and use the vacuum inlet for easy leaf mulching with a Vacuum Kit (BOTH SOLD SEPARATELY)
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines

User questions & answers

Question:	do you gave a gas one with electric start
Answer:	I bought extra ones to have when purchased.
Question:	Does the machine come with covers for the main hopper and chipper chute to max. suction when using the vacuum attachment
Answer:	I don't think this is what you want. The feeder "hole" is only 3" and would likely clog up. Additionally, I believe this will turn the hay into to fine of pieces when all said and done.
Question:	Will this chop garden waste like tomato plants and corn stalks
Answer:	No
Question:	Where is it made at
Answer:	This wood chipper could chip all the wood it could chip if this wood chipper could chip wood! 👍😉

Product description

This Landworks Super Heavy Duty The Wood Chipper Shredder has a RATO 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine. Includes a top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX small branch/limbs, 3 in 1 Capable Multi-Function, 3 Years Warranty. Fuel this Wood Chipper with 87+ unleaded gasoline (NO ETHANOL recommended) with a max capacity of 0.7 gallons & fill the engine with Oil as recommended in the manual. The Universal Vacuum Kit can be used with GreatCirlceUSA, Landworks & SuperHandy Wood Chippers (with the correct adapter piece depending on the model). The Universal Tow Bar Kit can be used with various Wood Chipper brands like: GreatCircleUSA, Landworks, SuperHandy, Harbor Freight, Tazz & Earthquake Wood Chippers Shredders (WOOD CHIPPER NOT INCLUDED)

• MULTI-FUNCTION CAPABILITY; This 3-in-1 Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1 when using the top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX branch/limbs, or the attachable leaf vacuum for mulching
• UNIQUE DESIGN; The Slanted Housing design reduces jams, unlike other chippers; Hookup your: ATV, lawn mower/small tractor, for easy transportation with a Tow Bar Kit and use the vacuum inlet for easy leaf mulching with a Vacuum Kit (BOTH SOLD SEPARATELY)
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), pertrified wood or vines

User questions & answers

Question:	What brand is the engine? Where is it made
Answer:	It is made in China. Thanks!
Question:	Hi! whats the difference between this landworks chipper and the superhandy chipper? at 1 point, the lw had an lct motor, but seems both now have rato
Answer:	Yes, it is a self feeding unit.
Question:	Where was this unit manufactured
Answer:	Unfortunately we do not sell the motor by itself. Yes you need a compliant motor in California
Question:	how good is the extened warranty and is it worth the money
Answer:	It should not be hard, if you need any parts you can contact us directly, since this is an entirely new sku parts will take about 1-2 months to arrive. As time progresses we will have more parts made for this unit.

Product description

This Wood Chipper Shredder design comes with a EXTRA Large Hopper for MAX volume Chipping/Shredding up to 3" MAX branches/limbs to mulch all wood to a reduction ratio of 15:1 with an elongated top adjustable discharge chute. The ability to hook up your Chipper to your own personal ATV, lawn mower/small tractor, allows for easy transportation on your land to where you need it, w/ the purchase of a Tow Bar Kit (SOLD SEPARATELY).

Our Wood Chipper Shredder comes has a powerful recoil starting Rato 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handling up to 3" diameter wood without a problem. Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), Max capacity of 0.7 gallons.

The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate hand & eye protection (ENGINE OIL NOT INCLUDED). This wood chipper comes with a 3-year limited. We have a dedicated customer support team stand behind our chippers, so you can trim your trees with ease knowing that we are always here for you.

• EFFFICIENT PERFORMANCE; This Mini Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeing Chute for upto 3" MAX branches, limbs and debris
• UNIQUE DESIGN; Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), pertrified wood or vines

User questions & answers

Question:	Manual recommends sae 30 oil, but this page recommends 10w-30 - which is correct? average temp here is 50-90 degrees fahrenheit
Answer:	Hi. It can be stretched up to 6.5 feet
Question:	So oil is not included. how much oil is needed
Answer:	Please go to our store front or search for Home4 for the other color. Thanks
Question:	Self feed feature
Answer:	It would not work well on a straight wall. It is shaped like a V and you need to extend all of the points to make the basket that the stuffed animals sit in.
Question:	No ethanol what do you do if you live in california says carb compliant we have ethanol? who's engine is it where made
Answer:	Hi. It's designed in USA and made in China.

Product description

Part #6303

1 Blade Set (3 Blades)

20 1/2" Length

5/8" Center Hole



GatorMulch



Replaces:



BAD BOY 038605000

DIXIE CHOPPER30227-60

DIXIE CHOPPER 30227-60V

DIXON INDUSTRIES 12421

DIXON INDUSTRIES 13956

DIXON INDUSTRIES 539119871

DIXONINDUSTRIES 539129747

DIXON INDUSTRIES 539129775

DIXONINDUSTRIES 9383

EXMARK 1-613112

EXMARK 103-0301-S

EXMARK 613112

GRAVELY 46999

GRAVELY 8979600

HUSTLER 794230

TORO 105-877

TORO 105-877-03

WHEEL HORSE 112947

OREGON 491-506

OREGON 90-724

OREGON 96-319

OREGON 96-335

OREGON 96-740

STENS 302-028

STENS 302-136

STENS 302-620

STENS 302-696

STENS302228

SUNBELT B1SB6303

WINDSOR 50-4780

WINDSOR 51-2800

WINDSOR 51-2805

User questions & answers

Question:	Blade thickness and width
Answer:	They are thinner then the ones you would buy at your local dealership and the do not hold an edge. If you happen to hit something, well let me put it this way they are as structural as today’s cars with a crumple zone lol but seriously don’t wast your time or money
Question:	Will this fit Sears craftsman 60" mower
Answer:	No, the center-bolt hole is larger than those for a craftsman.
Question:	What is the thickness of the blades
Answer:	I’m not exactly sure, but they are thick and I feel have held up better than the blades that came with my Hustler SD with 23 ho Kawasaki engine. I love these blades and can’t say enough good about them! I live on a large hill with rough terrain and I’m always hitting something I can’t see. They lasted twice as long before I had to sharpen them than my regular blades ever have
Question:	Will these blades fit a wood finish mower rd
Answer:	I have an old White tractor with a 60" deck that calls for Woods blades, and these work well on it.

Product description

Quickly turn your yard debris into nutrient-rich garden mulch and do your part to reduce, reuse and recycle with the Sun Joe Chipper Joe electric chipper/shredder. Powered by a robust 14-amp motor, the CJ601E electric wood chipper and shredder generates speeds of up to 4,300 revolutions per minute, making quick work out of the brush, leaves and branches overcrowding your lawn. Designed for light-duty jobs, this wood chipper effectively chips and shreds wooden sticks and limbs up to 1.5-inches thick, reducing your yard waste up to 1/16th its original size. The minimized wood chips resulting from Chipper Joe’s efforts are perfect for use as garden mulch around your trees and flower beds. Easy to assemble and virtually maintenance free, the Chipper Joe electric chipper and shredder is ready to go when you are. Just plug it in and instantly start chipping! Unlike gas-powered tools, the electric-powered Chipper Joe means you don’t have to deal with smoke, fumes, unpredictable starters and costly tune-ups. The CJ601E also features a safety stop that automatically engages when the hopper is opened. The Chipper Joe electric wood chipper/shredder is ETL-approved and backed by a full two-year warranty.

• POWERFUL: 14 amp motor effectively chips and shreds branches up to 1. 5-inches thick. No load speed is 4300 rpm
• MULCHING: Ideal for turning branches and twigs into nutrient-rich garden mulch, reducing your yard waste up to 1/16th its original size
• PORTABLE: 6-inch wheels for easy portability
• SAFETY HOPPER: Locking knob prevents the motor from operating when opened

User questions & answers

Question:	I had a load of wood chips delivered from a tree service and those chips are kind of large. Will this chip those chips down to a smaller size
Answer:	Page 9 of the engine manual shows SAE 30 for temps from 50 to 100+F but it probably won't make any difference since 10w - 30 will be the same once warmed up. The manual actually calls for 15w - 40 for most of the temp range but again any difference will not be significant with your average temps.
Question:	Will this handle rose clippings? Thanks
Answer:	Actual amount of oil is in the manual, but it is less than a quart.
Question:	How well does it do with bamboo? I have the yellow groove variety. Some of the stalks are over 1 inch thick
Answer:	Not really.
Question:	I just bought a few acres with thousands of 1 inch diameter "weed" trees on it. Can I run this for several hours a day every day
Answer:	The owners manual for the engine says to add fuel stabilizer if an ethanol blend is used. Like everything else it's all made in China. This is only useful for the smallest branches and twigs, I used it for 2" or smaller oak and manzanita branches and the cutters dulled quickly. Pine branches with needles clogged it up quickly. There's an access panel to get to the blades to sharpen them but you still need to take it apart to get them completely off. I'm thinking about sending it back.
Question:	Manual recommends sae 30 oil, but this page recommends 10w-30 - which is correct? average temp here is 50-90 degrees fahrenheit
Answer:	What you see is what you get. The white plastic insert comes out and you plug in your extension cord. This machine is a beast. It will "devour" a pile of freshly (day old) cut shrubs in a short time. I "processed" a pile of trimmed crape myrtles 12'x12'x4' in less than 2 hours. I chip/shred into a kids plastic swimming pool and then shovel the results into a single 50 gallon bag that weighed nearly 50 lbs. The "beast" never clogged or stopped running the entire 2 hours.
Question:	So oil is not included. how much oil is needed
Answer:	Terrible. I purchased it for that reason; I wanted a sturdy, toothed shredder, not one of those glorified string trimmers. However, the feed throat is only 5"x1 1/4", large enough for about five leaves at a time. And those leaves I did feed through the machine came out the discharge chute slightly mangled, but certainly not shredded. I set it in the back of the shed, sadder but wiser, and bought a Toro 51621 UltraPlus shredder vac. Emptying the bag is a hassle, but it really sucks up the leaves, and pulverizes them. If you can handle the leaf dust, it would make quick work of your leaves using it without the bag.
Question:	Self feed feature
Answer:	I owned the CJ602E briefly. The cutting blades operate entirely differently for each machine. For the (2) they are more like guillotines. Whirring by and cutting, inch by inch as the material is pulled down by gravity. The (2), also jams much more easily, with the only remedy being...turn off the machine, unplug it, unscrew the locking bolt to the hopper, lift the hopper, find the culprit, and manually rotate the wheel that holds the blades in the opposite direction with a stick or a gloved hand until the "culprit" breaks free, pull it out, close the hopper, screw the hopper bolt back down tight, plug it in, turn it on, and proceed. You can hit the reset switch too for good measure. Now with the (3), it rarely jams due to its "squirrel wheel" design. When you look into the hopper, it is as if your are viewing the top of a "squirrel wheel." The material is pulled to the right and then crushed inbetween the wheel and a counter plate. (3) slows down as it processes the bigger pieces of material, but rarely, if ever, stops. Also, you always have the option of reversing the wheel, which spits everything back up/out. It is not perfect. Occasionally, a branch gets cut into an awkward size due to a protruding limb that gets snapped in half...and just rattles around in there. A stick and patience and time usually solves this, but every once in a blue moon, you have to turn off the machine, disconnect the power, and go fishing with a metal hanger. The chunks from (3) are much larger than (2), and often not as clean looking due to the tremendous efficiency of the guillotine like action of (2). The shear number of times that you spend unjamming (2), makes it a much less efficient use of your time. Let's face it, most of us do not love yardwork. We do it because it has to be done. We don't want it to take any longer than it has to... as we have other things to do with our time. So, spend the few extra bucks and get (3). The work will get done, it will look almost as good as (2), and you can get on with your life.
Question:	No ethanol what do you do if you live in california says carb compliant we have ethanol? who's engine is it where made
Answer:	I owned the CJ602E briefly. The cutting blades operate entirely differently for each machine. For the (2) they are more like guillotines. Whirring by and cutting, inch by inch as the material is pulled down by gravity. The (2), also jams much more easily, with the only remedy being...turn off the machine, unplug it, unscrew the locking bolt to the hopper, lift the hopper, find the culprit, and manually rotate the wheel that holds the blades in the opposite direction with a stick or a gloved hand until the "culprit" breaks free, pull it out, close the hopper, screw the hopper bolt back down tight, plug it in, turn it on, and proceed. You can hit the reset switch too for good measure. Now with the (3), it rarely jams due to its "squirrel wheel" design. When you look into the hopper, it is as if your are viewing the top of a "squirrel wheel." The material is pulled to the right and then crushed inbetween the wheel and a counter plate. (3) slows down as it processes the bigger pieces of material, but rarely, if ever, stops. Also, you always have the option of reversing the wheel, which spits everything back up/out. It is not perfect. Occasionally, a branch gets cut into an awkward size due to a protruding limb that gets snapped in half...and just rattles around in there. A stick and patience and time usually solves this, but every once in a blue moon, you have to turn off the machine, disconnect the power, and go fishing with a metal hanger. The chunks from (3) are much larger than (2), and often not as clean looking due to the tremendous efficiency of the guillotine like action of (2). The shear number of times that you spend unjamming (2), makes it a much less efficient use of your time. Let's face it, most of us do not love yardwork. We do it because it has to be done. We don't want it to take any longer than it has to... as we have other things to do with our time. So, spend the few extra bucks and get (3). The work will get done, it will look almost as good as (2), and you can get on with your life.

Product features

Chip Away!

Chipper Joe generates speeds of up to 4,300 revolutions per minute, making quick work out of the brush, leaves and branches crowding your lawn. Chipper Joe effectively chips and shreds wooden sticks and limbs up to 1.5-inches thick.

Quickly turn your yard debris into nutrient-rich garden mulch and do your part to reduce, reuse and recycle with the Sun Joe Chipper Joe electric chipper/shredder. The minimized wood chips are perfect for use as garden mulch around your trees and flower beds.

Powerful 14 Amp Motor

Chipper Joe is powered by a 14-amp motor generating speeds of up to 4,300 RPM to make quick work of the brush, leaves and branches on your lawn.

Safety Features

Featuring a safety hopper locking knob to prevent the motor from operating when opened and a reset button in the event the chipper is overloaded.

16:1 Reduction Ratio

Quickly turn your yard debris into nutrient-rich garden mulch. Effectively chips and shreds wooden sticks and limbs up to 1.5-inches thick.

Product description

Get Shredded! The Sun Joe Shredder Joe SDJ616 13-amp electric leaf mulcher/shredder instantly turns the hefty heaps of dead leaves crowding your yard into nutrient-rich mulch that can be easily disposed of or utilized as compost. Not only will Shredder Joe reduce your yard waste up to 1/16th of its original size, but it will also create an ideal fertilizer that can be recycled and reused to rejuvenate your garden. Plus, Shredder Joe uses electric power, not gas, so you can eco-consciously shred your leaves without producing toxic emissions. Shredding leaves into mulch is easy with Shredder Joe. Simply dump handfuls of leaves into the easy-to-load 19-inch hopper, and watch its powerful 13-amp motor and bladeless mulching system make quick work of your yard waste. With its 12-inch cutting diameter and heavy-duty trimmer line, Shredder Joe safely and efficiently mulches up to 55 gallons of leaves per minute! Featuring Smart Shred technology, Shredder Joe employs an advanced motor cooling system that diverts the air from the shredded leaves to significantly reduce the amount of dust generated during use. Unique to Shredder Joe is an easy-to-read control dial with adjustable settings for wet or dry yard waste, including leaves, thatch, grass clippings and even pine needles. Weighing only 13.4 lbs, Shredder Joe is easy to transport and its space-saving design lets you remove the legs and nest the motor housing inside the hopper for compact storage. Shredder Joe assembles in minutes with no tools required! Twenty replacement cutting lines are included and are equally effortless to install. GET EQUIPPED for fall cleanup with the Sun Joe Shredder Joe — the smart, safe and efficient tool to lighten up your leaf load. Sound power level - 110 dB.

• Powerful: 13-amp motor with 8, 000 RPM
• Compatible: trash-can compatible hopper
• Control dial: easy-to-read control dial
• Dust-reducing motor: lightweight and durable dust-reducing motor cooling system
• Required extension cord rating 16 gauge. Maximum extension cord length (ft.) 50

User questions & answers

Question:	where is this manufactured
Answer:	The Sun Joe leaf mulcher/shreader is manufactured in New Jersey.
Question:	I have a very large yard. What's the maximum length and size outdoor extension cord(s) I can use with this shredder without burning out the motor
Answer:	My extension cord is 50 feet long, 2 25s connected together. The current rating is for when the device is mulching, not just spinning, which in my experience if you are doing it alone is about 75% of the time. The risk is not in burning out the motor because of the cord, the risk is overheating the cord. If you are not overloading the motor, it should last, like mine has. Before you buy a heavy (hard to use) 14 or 12 gauge wire, try the 16 Gauge and feel the wire after 30 minutes of use, if it is warm or hot then you will need to use the higher gauge wire. Note: this device has two design flaws, the legs, no matter how you tighten them tend to slide down during use; and it is difficult to keep a paper leaf bag secured under the device, I use large rubber bands (garbage can size), the elastic band on the device doesn't work for paper bags.
Question:	Can I use the Birtish 230 Volt supply for this device
Answer:	I'm assuming the questionnaire means standard British 230 Volts. I'm not sure what would result as the motor is meant for standard U.S. 115 Volts so 230 Volts may over-speed the motor. Would suggest that a transformer be used to step down to 115 Volts.
Question:	Are the lines easy to replace? About how long do they last
Answer:	The lines are very easy to replace. The interval between changes depends on the material you are shredding. We just concluded our fall shred-a-thon - 32x55 gallon garbage bags stuffed with mostly maple and some oak leaves. There are very few sticks or twigs in our leaves, so we don't ever break a line. Over time they do wear, and when they shorten an inch or so, I put in new ones. I think I changed strings 3 times, mostly when grinding the oak leaves as they are tougher than the maple. Changing takes just a couple minutes and you can do it with gloves on!

Product features

Get Shredded With This Easy To Use Leaf Mulcher!

Simply dump handfuls of leaves into the easy-to-load 19-inch hopper, and watch its powerful 13-amp motor and bladeless mulching system make quick work of your yard waste. With its 12-inch cutting diameter, the Shredder Joe electric leaf mulcher safely and efficiently mulches up to 55 gallons of leaves per minute!

Featuring Smart Shred technology, Sun Joe employs an advanced motor cooling system that diverts the air from the shredded leaves to significantly reduce the amount of dust generated.

Leaf Bag Attachable

Conveniently attaches to leaf-bag-lined trash container for easy disposal.

13-Amp Motor

Powerful 13-amp motor with 8,000 rpm mulches up to 55 gallons (208 l) of leaves per minute and reduces yard waste up to 1/16th its original size.

Control Dial

Unique to Sun Joe is an easy-to-read control dial with adjustable settings for wet or dry yard waste, including leaves, thatch, grass clippings and even pine needles.

Product description

Switch from blow to vac and mulch with just the turn of a dial. “Rake the leaves” with just this one tool in half the time it used to take you. And with the 16:1 mulch ratio, you’ll have far fewer bags to drag to the curb when you’re done. The 600 CFM – 12A Electric TRIVAC is here to make yard work so much easier. First off, all that tech is less than 10 lbs, so almost anyone can operate it with just one hand. The 2-speed control lets you blow on low for tight corners, and then crank it up to 70 mph for the open yard. 600 CFM (Cubic Feet per Minute) is an awful lot of air and creates a nice wide stream to get even more done in less time. And the powerful 12A electric motor frees you from the expense and hassle of gas-powered blowers to give you a cleaner and quieter experience. Let’s talk some more about that mulching function. The patented articulating design lets you flip it into vacuum and mulch mode with just one turn. You don’t need to switch out the tube, and you certainly don’t need any tools to do it. It sucks up leaves into the metal impeller and shredder blades, which chops them up into 1/16th their regular size. So you can stuff 16x more leaves and yard debris into the 1.4 bushels collection bag than you could with a regular yard vacuum or a blower or a rake. Welcome to the TRIVAC, it’s the better way to go “rake the leaves.”

• LEAF BLOWER, MULCHER & VACUUM: The proprietary design changes from a blower to a vacuum with a mulcher with just the turn of a dial. Blow, vacuum, and mulch all day long if you want. But you won’t have to. The Worx Trivac makes quick work of yard work
• A WIDE, STRONG STREAM OF AIR: 600 CFM (Cubic Feet per Minute) come streaming out of the wide-mouth tube. That’s high-capacity air volume so you clear your property with less passes back and forth
• METAL MULCHER: The metal impeller with its shredder blade cuts in two stages, chopping leaves down to a 16:1 mulch ratio – that’s 16 bags of leaves mulched into one
• QUICK, DETACHABLE BAG: When it’s time for composting or collection, the bag has an easy release. No muss, no fuss. Turn a dirty job into a quick one
• DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX: WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• 2 SPEEDS FOR DIFFERENT JOBS: Go slow for pavement or tight corners. On the open lawn, switch to speed 2 – up to 70mph – and see what it can do
• ONE-HANDED OPERATION: The Worx Trivac is designed to be controlled with just one hand. It’s only 9 lbs. and the ergonomic design funnels the wind so it’s easy to handle

Product features

3-in-1: Blow, Vacuum, Mulch

The perfect yard clearing tool. Say goodbye to your rake, and you’re going to be using a lot fewer garbage bags.

One-Handed Operation

All this power and functionality only weighs 8.6 lbs, so you can operate it and haul it around the yard with just one hand.

Metal Mulcher

The metal impeller with its shredder blade cuts in two stages, chopping leaves down to a 16:1 mulch ratio (that’s 16 bags of leaves mulched into 1).

Easy Bag Removal

A durable leaf collection bag is included with the TRIVAC, and it detaches quickly for emptying and cleaning.

One-Touch Conversion From Blower to Vacuum

Just turn the knob. The patented articulating mower switches from Blower mode to Vacuum mode as quick as that.

A Wide, Strong Stream of Air

600 Cubic Feet per Minute, blowing out at 75 MPH, from a motor spinning at 16,500 revs/min is more than enough air volume and force to clear the largest lawns with the biggest trees.

Metal Mulcher

The durable, high-efficiency metal impeller boasts a 16:1 mulch ratio. That means 16 bags worth of leaves get chopped up into 1 bag. No more lining the curb with dozens of bags of leaves.

Product description

Replacement For OEM Parts Number(s):



For Ariens Gravely

• 00878100

For Ariens Gravely

• GDU10230, Bad Boy

For Briggs and Stratton

• 591648

For Bunton

• PC1255

For Bunton

• PC2005

For Bunton

• PL4055

For Bunton

• PL4855

For BUNTON-GOODALL

• PL4205

Fits OEM Models:



For Ariens Models

• 988812 PWKA1648S 000101 48inch, 992607 000101 GC KW2561S, 992609 000101 GCH KW1948S, 994401 000101 EFZKA1934S, 994604 000101 GSRKA1934S

For Gravely Models

• 988141 000101 000400 HR1948FX 19hp Kawa. 48" Fx. Deck, 988141 000401 Pro-Walk Hydro HR1948FX 19 hp Kawasaki 48", 988142 000101 000400 HR1952FX 19hp Kawa. 52" Fx. Deck, 988142 000401 Pro-Walk Hydro HR1952FX 19 hp Kawasaki 52", 988143 000101 000400 GR1332FX 13hp Kawa. 32" Fx. Deck, 988143 000401 Pro-Walk Gear GR1332FX 13 hp Kawasaki 32" Deck, 988145 000101 000400 GR1548FX 15hp Kawa. 48" Fx. Deck, 988145 000401 Pro-Walk Gear GR1548FX 15 hp Kawasaki 48" Deck, 988148 000101 000400 HE1952FL Pro Walk Hydro 52" Float, 988148 000401 HR1952FL Kawasaki 52" Float Electric, 988150 00101 32GR, 988152 000101 48GR, 988158 000101 52HE Pro-Steer, 988170 40000 Pro-Walk 48 LP, 988180 00101 Pro-Walk 48HE, 988181 000101 Pro-Walk 48 LP, 988325 000101 52HE Pistol Grip, 988403 000101-000200 EHWKA1948S, 988403 000201 EHWKA1948S, 988410 00101 000400 EGWKA1332S, 988410 00401 EGWKA1332S, 988412 000101 000400 EGWKA1548S, 988412 000401 EGWKA1548S, 988641 000101 GHWKA1536S, 992409 000101 EverRide Fury ZT, 992609 000101 GCH KW1948S, 994102 000207 2352FX 23hp Kawasaki 52" Fixed Deck, 994103 000101 000500 2352FL 23hp Kaw. 52" Floating Deck, 994103 000501 2352FL 23hp 52" Floating Deck, 994104 000101 000297 1934FX 19hp Kawasaki 34" Deck,
  • Replaces OEM Part Numbers: Bad Boy 038-5350-00, 038-5350-0050; Bunton PC1255, PC2005, PL4055, PL4205, PL4855; Great Dane D18086, GDU10230; Hustler 795757
  • Replaces OEM Part Numbers: John Deere AM104489; Lesco 021871, 050111, 21871, 5011, PL4205; Scag 481706, 482461, 482877, 483316, A48110, A48184; Snapper 1-7043, 7075771, 7075771BZ, 7075771BZYP, PL4205;
  • Compatible with: 48" Decks Scag Freedom Z
  • Compatible with: 48" Decks Great Dane Scamper Surfer & Chariot; 48" Decks EverRide Wasp HP & Fury ZT
  • Compatible with: Gravely Pro-Walk 48G 1548G 1948 Pro-Stance 1948FX 1948FL 2048FX 2048FL

User questions & answers

Question:	will this fit a toro mx4880 48" deck
Answer:	Hello and thanks for checking. To confirm fitment, we would need your machine's full model and serial number. Send that along in a message and we can certainly look into this for you!
Question:	Ariens zoom xl 54. Do you have this size
Answer:	Gravely 48 cut
Question:	Will these fit a 48” hustler raptor SD
Answer:	We would need the full model and serial number to be able to confirm fitment.
Question:	will this fit a toro mx4880 48" deck
Answer:	Hello and thanks for checking. To confirm fitment, we would need your machine's full model and serial number. Send that along in a message and we can certainly look into this for you!

Product features

LawnRazor Hi-Lift Toothed Blade Set 810-CBL2237D

• Includes: LawnRazor Hi-Lift Toothed Blades
• Compatible with the following brands: Bad Boy, Bunton, Great Dane, Hustler, John Deere, Lesco, Scag, Snapper, Toro, Wright Mfg., Exmark
• Compatible with the Following Models: Z-Master Pro-Stance Pro-Walk
• Replaces for the Following OEM MPN's: 482877, 038-5350-00, 038-5350-0050, PC1255, PL4855, D18086, GDU10230, 795757, AM104489, 021871, 050111, 5011, 481706, 482461, 483316, A48110, A48184, 1878444, 7075771, 107-3192, 107-3192-03, 110-0414, 110-0416, 71440002

Mulching Blades

• Great for the toughest jobs, heavy duty mulching for tall grass and weeds.
• Toothed mulching blades are the best option for clearing thick mowing conditions
• Not great in overly wet conditions as the small particles this blade creates can become pulp like.

High-Lift Blades

• Best option for bagging or throwing grass clippings a long distance.
• Performs well in thick grass but requires more horsepower for optimal performance.
• Not optimal in Sandy or loose soil conditions.

Medium-Lift Blades

• Best option to be used as an all-in-one solution.
• This blade is typically very close in lift profile to the original blade that came with the mower.
• Bag, mulch, discharge, this blade will do it all.

Low-Lift Blades

• Lowest lift and suction available. Primarily used for side discharge only.
• Performs well and has the longest expected life span in sandy conditions.
• This blade will produce the lowest amount of dust and noise.