13 best toro tillers

Product description

We are selling a set of 36 new tiller tines for your Toro Dingo tiller attachment (model 22445). You get 18 left lines and 18 right tines These tines are OEM and brand new

• toro dingo tiller tines

Product description

Selling a drive chain for the Toro Dingo Tiller Attachment model 22445. The part number for the chain is 98-9088 This chain OEM and brand new

Product description

The toro lawn striping system provides you the ability to easily add professional-looking, ball-park quality stripes and patterns to your lawn, while you mow. Easily attaches to most walk-behind mowers and can be used with and without the bagger attached. Mow and stripe at the same time, it’s that easy.

• Assembled dimension: 13 in. w x 16.50 in. d x 24 in. h
• Use with or without bagger attachment
• Roller easily removes for storage or areas where striping is not desired
• Easy assembly with just a phillips screwdriver
• Requires 16-20 lbs. of dry sand not included

User questions & answers

Question:	Will this fit a 19" deck mower
Answer:	You put it on the ground as close to the hole as you can, do it at night do you don’t agitate the bees. Within a couple days if not sooner..no more bees in that particular nest. What happens is the bees entering the nest bring the powder with them on their legs/body..so it’ll contaminate the inner nest...works wonders.
Question:	Can this be used on a rear bag mower
Answer:	No! You should never kill Bumble Bees. They are pollinators and endangered in many parts because of over pesticide use. Without bees we will die too!
Question:	My lawn is a new installation. Will this be harmful to the young grass? Should I wait a year before stripping or can the new grass handle this
Answer:	This worked for me when I had bees burrowing near a deck. As long as you have access to where they are entering you should be able to apply. It's a powder, so you have to make sure you have good access. I suggest doing this at night, when the bees aren't active.
Question:	Can it work for 21" club cadet mower
Answer:	All you need to to is wait until dusk when most of the bees are back in the nest (so you don't get stung). Place the powder around the whole (in if you can) and leave it alone. In the next day or two the bees bring the powder back in to the whole as it clings to them and they are done for. It's just that easy.

Product description

Toro Deluxe Walk Behind Lawn Mower Cover

• Genuine OEM Toro Part
• Replaces 490-7463
• Protect Your Investment Keep dirt and debris off your mower during the winter
• Waterproof

User questions & answers

Question:	will this fit my Toro Recycler push gas mower
Answer:	I have the same mower, it fits fine
Question:	Will this fit my Black & Decker 19" Electric Lawn Hog
Answer:	It fits our 22" or 23" deck Troybilt self-propelled mower right nice with a little more room to spare. This is a very nice pushmower cover (not thin , flimsy, or plastic); would recommend this to product to someone with no problem.
Question:	Is this cover waterproof or water resistant or both
Answer:	The cover is a canvas type material and there is a water resistant coating on it. Last rainstorm that came through it held up pretty good.
Question:	What are the dimensions? From ground to top of handle, from handle to front wheel and width from wheel to wheel and handle bar
Answer:	Ground to top of handle - 40 inHandle to front wheel - 58 inWidth Wheel to wheel - 24 inWidth handle bar 18 in** there is more material than my mower's handle and should easily fit a 20 maybe 22 in handle. Also the part that covers the front wheels have an elasticity and corners like a fitted bed sheet and the rear of the bag opens for ease of installation and removal with a nice fastening strap and heavy plastic buckle. The bag covers my mowers great but there should be enough material to go up an inch or two on all these measurements.

Product description

This Scraper and Hardware kit helps ensure optimum performance on your Toro Powerlite or CCR Powerlite 16" Snow thrower. Over time, as your snow thrower scraper contacts asphalt or concrete it will wear down and require replacing in order to continue to clear snow effectively. Genuine Toro parts are designed specifically for your machine and offer quality, performance and value.

• Toro Replacement Scraper and Hardware Kit Fits 16 Inch Powerlite Single Stage Snowthrowers Part Number 38259
• For use with Toro Powerlite and CCR 16" single stage snowthrowers
• 1x 75-8780 replacement scraper
• All necessary hardware for replacement included
• Genuine Toro Parts ensure compatibility and quality

User questions & answers

Question:	Is this for a model number 38182? and does it come with Hardware
Answer:	This part does come with hardware as stated in the description. Regarding the models it works with, at the top of the Amazon page for this item is an area to enter the make and then the model number of your snowblower/snowthrower. I entered your model number (assuming the make is Toro) and it said that this part should fit on that model.
Question:	Does it come with the screws
Answer:	Yes. It comes with everything you need to install.

Product description

Genuine OEM Toro Part.

• Length: 35 ". Width: 3/8 ".
• Fits Toro models: 20001 (2004), 20003 (2005), 20003 (2006), 20005 (2005), 20005 (2006), 20007 (2004), 20012 (2002), 20012 (2002), 20012 (2003), 20012 (2004), 20012 (2005), 20012 (2006), 20013 (2002), 20013 (2003), 20013 (2004), 20013 (2005), 20013 (2006), 20014 (2002), 20014 (2003), 20016 (2002), 20016 (2003), 20016 (2004), 20016 (2005), 20016 (2006), 20017 (2002), 20017 (2003), 20017 (2004), 20017 (2005), 20017 (2006), 20018, (2002),
• 20018, (2003), 20019, (2003), 20031, (2004), 20036, (2002), 20036, (2003), 20036, (2004), 20037, (2002), 20037, (2003), 20037, (2004), 20038, (2002), 20038, (2003),20038, (2004),20039, (2002),20039, (2003),20039,(2004),20041, (2005),20042, (2001),20043, (2001),20045, (2001), 20047, (2006), 20048, (2001), 20049, (2005), 20051, (2004), 20064, (2007), 20064, (2008), 20065, (2007), 20065, (2008), 20066, (2007), 20066, (2008), 20067 (2007)
• 20067, (2008), 20068, (2008), 20069, (2007), 20070, (2006), 20071, (2007), 20072, (2007), 20073, (2007), 20074, (2007), 20075, (2007), 20076, (2007), 20079, (2006), 20086, (2008), 20087, (2008), 20089, (2008), 20094, (2007), 20096, (2007), 20098, (2007), 20110, (2008), 20110, (2009), 20111, (2008), 20111, (2009), 20112, (2008), 20112, (2009), 20113, (2008), 20113, (2009), 20432, (1993), 20434, (1993), 20434, (1994), 20655, (2007), 20655, (2008), 20655, (2009), 20655, (2004), 20655, (2005),
• 20655, (2005), 20655, (2006), 20656, (2007), 20656, (2008), 20656, (2009), 20656, (2004), 20656, (2005), 20656, (2006), 20658, (2008), 20658, (2009), 20781, (2003), 20781, (2004), 20781, (2005), 20783, (2003), 20783, (2005), 20784, (2005),

User questions & answers

Question:	will this fit a 2001 toro personal pace
Answer:	Yes, this part will fit your Toro (Model 20001)
Question:	Will this belt fit ph-xt
Answer:	Go to the manufactures website, or if you already know where your Toro Model Number & Serial Number Sticker is at, [mine is under the rear flap that rests on the rear bag when I am using it to bag clippings.
Question:	Will this fit a Model 20017 SN
Answer:	Yes this is the correct one.
Question:	Do you have a belt for a Toro S-120 Electric snow broom? If so how much? yourfurnitureman at gee male
Answer:	Daniela, The belt you are looking for is part number 37-6010. Unfortunately, we do not have this part currently available. Allison Pitera - Online RepresentativeWeingartz - Everything From Lawn To SnowYour online experts for power equipment, parts, and service

Product description

Toro Recycler with Briggs & Stratton Tune-up Kit  Protect your investment with our Original Equipment Manufacturer (OEM) Toro Recycler with Briggs & Stratton Tune-up Kit. Genuine Toro and Briggs & Stratton parts maintain consistent performance and assure easier installation. The oil is specifically formulated for Toro Recycler engines. Includes all the parts to perform a simple tune up: Air Filter (Briggs & Stratton 491588S), Spark Plug (Briggs & Stratton 796112), 18 FL. OZ SAE30 Toro Premium Lawnmower Oil (38916), 22” Blade (Toro 131-4547-03) - Replaces prior part 108-9764-03. Does NOT include Fuel Treatment included with Toro WPM Maintenance Kit (20234). Uses Briggs & Stratton spark plug not competitive or aftermarket equivalent. Customized for Toro Recycler models with serial number before 316000000. This kit fits popular Toro mower models including: 20110 20111 20112 20113 20330 20331 20332 20333 20334, 20339 (Serial # 314000001 to 316999999), 20350 20351 20352 UPC 0636947512322

• Toro Recycler with Briggs & Stratton Tune-up Kit
• 22” Blade (Toro Part 131-4547-03 (Replaces 108-9764-03))
• Air Filter (Briggs & Stratton Part 491588S)
• Spark Plug (Briggs & Stratton 796112 (Often replaced by Champion J19LM & NGK 5798 BR2LM)
• Toro Premium Lawnmower Oil 18 FL. OZ SAE30 Oil (Toro Part 38916 )

User questions & answers

Question:	Will this fit a model
Answer:	If the air filter is square and it's a 22'' deck then it should fit. Like I have mentioned a couple times, parts like traction cable & belt will last longer with a good blade on the mower.
Question:	Will this kit work on a Toro model
Answer:	Yes, I have a Toro model 20332 and this kit worked perfectly.
Question:	Does this come with the mulching blade shown in the picture
Answer:	Yes it does exactly same blade as the blade originally purchased with the mower.
Question:	what is the spark plug gap
Answer:	The spark plug gap should be set at .030".

Product description

Rewind Recoil Starter compatible with Briggs & stratton 497680.

Rewind Recoil Starter fits for Oregon 31-068.

Rewind Recoil Starter fits for Rotary 12368.

497680 Rewind Recoil Starter fits 12 CID vertical shaft L-Head engines.

497680 Rewind Recoil Starter easy to use with the pull rope for starting the grass cutter.

497680 Recoil Starter Assembly ideal replacement for the broken recoil starter of grass cutter. 497680 Rewind Recoil Starter compatible with Toro Walk Behind Lawn Mower models:

16401, 20010, 20011, 20020, 20021, 20022, 20023, 20023c, 20025, 20027,20028, 20029,20030, 20035, 20042,20043,

497680 Rewind Recoil Starter compatible with Lawnboy lawn mower models:

10316, 10317, 10318, 10319, 10329, 10418, 10517, 10519, 10522, 10524, 10640, 10640C

497680 Rewind Recoil Starter compatible with MTD walk behind lawn mower :214IP, 216IP .

497680 Rewind Recoil Starter compatible with Craftsman lawn mower: 917376271 917376430 .

Rewind Recoil Starter compatible with Briggs & Stratton small Engine:

099772, 099777, 110600, 111600, 120600, 121600, 122600, 123600, 124600, 125600

126600, 127600, 127700, 127800, 128800, 129500, 129700, 129800, 204400, 205400

120H00, 120K00, 121H00, 121K00, 122H00, 122K00, 122T00, 123H00, 123J00, 123K00

12A600, 12B600, 12C600, 12D600, 12E600, 12F600, 12G600, 12H600, 12J600, 12K600

12A800, 12B800, 12C800, 12D800, 12E800, 12F800, 12G800, 12H800, 12X800, 12Y800

Rewind Recoil Starter Material:metal,plastic,nylon.

Rewind Recoil Starter Mount Hole Diameter: 5mm(0.2in)

Rewind Recoil Starter Mount Hole Distance: 115mm (4.53in)

Rewind Recoil Starter Core Dia.: 50mm (1.97in)

Rewind Recoil Starter Main Color: Black

And the rewind recoil starter comes with 4 sets of screws.

• Rewind Recoil Starter Compatible with Briggs & stratton 497680; for Oregon 31-068; for Rotary 12368.
• 497680 Rewind Recoil Starter works with briggs and stratton 12 CID vertical shaft L-head and Quantum engines.497680 Starter rewind assembly for briggs and stratton, gasoline generator starter pull plate. Easy to use with the pull rope for starting the grass cutter.
• 497680 Recoil Pull Starter also works with Toro Lawnboy MTD Lawnmower.497680 Recoil Starter also know as lawn mower recoil starter,lawn mower recoil starter assembly.
• Good quality and excellent price.
• Note:Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Feel free to contact us by emails if you have any problems.

Product description

Gas Cap

Product description

Toro's powerful 4-amp corded hedge trimmer is designed to get the job done faster and easier. Ergonomic designs with durability features help get the results you are looking for with reduced hand and arm fatigue.

• Corded hedge trimmer with a powerful 4 amp motor
• 22-inch-long cutting bar; hardened steel blades
• Easily cuts through branches up to 9/16-inch thick
• Dual-action cutting system reduces vibration; cord-lock system
• Measures 8 by 8 by 36 inches; 2-year warranty

User questions & answers

Question:	I purchased this item almost two years ago. Today I started to use it for the time. It ran for about 10 seconds and then quit. Unable to start it
Answer:	I bought this item in 2013 and had the same problem today. I disassembled the lower part of the unit (had to take out about 10 small bolts) and found the inside was full of small pieces of brush. It looked like a rat's nest; the brush had probably blocked some of the brushes/contacts on the motor. I blew out the debris with a leaf blower set on its lowest setting. I reassembled the unit and now it works fine.
Question:	motor size
Answer:	4 amp is all they give you so 4amp times 120 volts equals 480 watts divided by about 750 watts per HP, maybe .64 but a lot of loss so between 1/3 and 1/2, cuts thru stuff like a manic, sliced thru honeysuckle up to 1/2" vines then ran over it with a strong mower n bag to pick up the junk
Question:	How much does it weigh
Answer:	It weighs about 6 pound. It's well balanced and easy to use. I've used it quite a bit, including yesterday for about 30 minutes. It's a nice piece of equipment, solidly built and does a good job. I have hesitancy in recommending it.
Question:	Is the auto feed any good. Had a weed eater and the auto feed never worked right
Answer:	The automatic feed doesn't work because it really doesn't have one. Instead, each time you your release the trigger switch and wait about 2 seconds you will hear a click and the two lines will each feed out about 1/4". It takes some getting used to but it works.. You can read about it in the manual under (Operation > Advancing theLline. p5 - manual # 374-0279 Rev. A))

Product description

Toro/Exmark fuel cap.

• Fuel Cap

Product description

Toro Gasket And Seal Kit Part # 119-1955

• Toro Gasket And Seal Kit Part # 119-1955

Product description

799728 Carburetor Fits But Not Limited To The Following Models:

28A702-0102-01 Engine

28A707-0101-01 Engine

28A707-0112-01 Engine

28A707-0113-01 Engine

28A707-0116-01 Engine

28A707-0117-01 Engine

28A707-0118-01 Engine

28A707-0119-99 Engine

28A707-0120-99 Engine

28A707-0121-01 Engine

28A707-0122-01 Engine

28A707-0122-02 Engine

28A707-0135-01 Engine

28A707-0136-01 Engine

28A707-0138-99 Engine

28A707-0526-99 Engine

28A707-0604-A1 Engine

28A707-0616-99 Engine

28A707-0625-A1 Engine

28B702-0001-01 Engine

28B702-0001-02 Engine

28B702-0102-01 Engine

28B702-0124-01 Engine

28B702-0134-01 Engine

28B702-0610-A1 Engine

28B702-0633-A1 Engine

28B702-1001-E1 Engine

28B702-1001-E3 Engine

28B702-1015-E1 Engine

28B702-1016-E1 Engine

28B702-1019-E1 Engine

28B702-1020-E1 Engine

28B702-1031-E1 Engine

28B702-1041-E1 Engine

28B702-1113-E1 Engine

28B702-1118-E1 Engine

28B702-1124-E1 Engine

28B702-1133-E1 Engine

28B702-1134-E1 Engine

28B702-1138-E1 Engine

28B702-1143-E1 Engine

28B702-1147-E1 Engine

28B702-1148-E1 Engine

28B702-1154-E1 Engine

28B702-1161-E1 Engine

28B702-1163-E1 Engine

28B702-1173-E1 Engine

28B702-1193-E1 Engine

28B702-1194-E1 Engine

28B702-1194-E2 Engine

28B705-0129-01 Engine

28B705-0629-A1 Engine

28B705-1129-E1 Engine

28B706-1030-99 Engine

28B707-0008-01 Engine

28B707-0009-01 Engine

28B707-0101-01 Engine

28B707-0111-01 Engine

28B707-0112-01 Engine

28B707-0113-01 Engine

28B707-0115-01 Engine

28B707-0116-01 Engine

• 799728 Carburetor compatible with Briggs & Stratton 498027 495706 494502 494392 498134 499161 498231 496592 lawn mower.Works with Briggs and Stratton 28R707 28V707 28B707 28T707 Engine.
• 799728 Carburetor AKA 498027 Carburetor,28B707 Carburetor,28V707 Carburetor,28R707 Carburetor,28T707 Carburetor.
• 799728 Carburetor also works with Toro 71301 56176 56177 56185 70080 70081 70082 70084 70089 70100 70120 70131 70141 70142 70171 70183 71140 71180 71181 71182 71184 71185 71188 71189 71190 71191 71200 71201 71202 71203 71205 71208 71209 71213 71199 71200 S2-12B502 R3-10B404 R3-12B602 Lawn Tractor.
• Air filter replaces # 496894S 496894 493909,AKA 496894S Air Filter,496894 Air Filter,493909 Air Filter.799728 carburetor comes with 1 Air filter,1 Fuel line,1 Fuel line shut off valve,1 Fuel filter,1 Spark plug,1 Gasket,4 Clamps.Easy replacement,Good value for money.
• Package include: 1 carburetor, 1 air filter, 1 spark plug, 1 fuel filter, 1 gasket, 1 fuel line and 4 clamps, 1 fuel shut-off valve.

User questions & answers

Question:	Where is the mounting hole on the air filter
Answer:	It’s the same as the mounting bolts for the carburetor
Question:	Would it work for a model 28R707, type 1120-E
Answer:	MOST ALL MODELS OF AIR FILTERS OF THAT TYPE WORK THE SAME WAY. TAKE COVER OFF AND LONG BOLT JUST GOES THREW THE MIDDLE OF FILTER.