10 best ambient weather radio alarms

Product description

Project the radio controlled time and indoor temperature on the ceiling or wall. The clear view projection clock includes a focus adjustment dial for a crystal clear projection.

• Project the radio controlled time and indoor temperature on the ceiling or wall.
• The ClearView Projection Clock includes a focus adjustment dial for a crystal clear projection.
• In addition, the projection can be reversed 180 degrees for optimal viewing throughout the room.
• The alarm clock features a bright backlit screen with time, month / date, day of week and indoor temperature, an alarm clock and snooze button.
• Equipped with an atomic clock, time and date are set automatically via radio and in synch with the U.S. atomic clock for utmost accuracy and automatically sets adjusts for daylight savings time.

User questions & answers

Question:	does this projection alarm clock have a electric cord or is it battery
Answer:	The clock itself has an indoor sensor which displays the indoor temperature. Otherwise you can buy an additional sensor if you want temperature in another inside location. You then have to change channels to view the temperature on the second indoor/outdoor sensor.
Question:	Is this clock lit with led bulbs? when they burn out, can they be replaced
Answer:	Simply moving your display console (or receiver) to a different location may easily fix the communication issue. We recommend the following best practices for trouble free wireless communication. Fresh Batteries. If applicable, make sure there are fresh batteries in both the console and remote. Remember to power up the console last when changing batteries. Do not use rechargeable batteries. They have a lower voltage and lower range than non-rechargeable batteries. Electro-Magnetic Interference (EMI). Keep the console several feet away from computers, TVs and electronic cables. Radio Frequency Interference (RFI). If you have other 433/915 MHz devices and communication is intermittent, try turning off these other devices for troubleshooting purposes. You may need to relocate the transmitters or receivers to avoid intermittent communication. Cold Weather. If the temperature is below < 10 degF, use e2 energizer batteries (Lithium), available in most stores batteries are sold (blue in color). Alkaline and NMH (nickel metal hydride) batteries do not operate below 10 degF. Sensor orientation. To insure proper communication, mount the remote sensor on a vertical surface, such as a wall. Do not lay the sensor flat if this is a small remote sensor. Line of Sight Rating. This device is rated at 300 feet line of sight (no interference, barriers or walls) but typically you will get 100 feet maximum under most real-world installations, which include passing through barriers or walls. Metal Barriers. Radio frequency will not pass through metal barriers such as aluminum siding. If you have metal siding, align the remote and console through a window to get a clear line of sight. Defective Sensor. It is possible the remote sensor is defective. If you have not done so already, to replace under one year warranty, please visit AmbientWeather.com/rma.html The following is a table of reception loss vs. the transmission medium. Each “wall” or obstruction decreases the transmission range by the factor shown below. Medium RF Signal Strength Reduction Glass (untreated) 5-15% Plastics 10-15% Wood 10-40% Brick 10-40% Concrete 40-80% Metal 90-100%
Question:	How do I reverse the projection 180 degrees
Answer:	I am sorry but they are not yet available. Sorry, the product is relatively new and we wanted to make sure there was enough interest in multiple sensors.
Question:	can you turn off the projection of the temperature and just project the time
Answer:	This is not really a car friendly product. It is meant for home use and requires an AC adapter.

Product features

Projection with backlight

Project the radio controlled time and indoor temperature on the ceiling or wall.

The ClearView Projection clock includes a focus adjustment dial for a crystal clear projection.

In addition, the projection can be reversed 180 degrees for optimal viewing throughout the room.

The alarm clock features a bright backlit screen with time, month and date, day of week, indoor temperature, an alarm clock with snooze feature.

Includes an AC adapter and an alternate battery power source.

Sharp, clear and focused projection light does not brighten the room

The projection casts a soft glow, does not brighten a dark room, and is easy to read in the middle of the night when your eyes have adjusted to the dark.

The Perfect Travel Alarm Clock

Equipped with an atomic clock, time is automatically set via a radio controlled signal, and in sync with the U.S. atomic clock for utmost accuracy.

The clock automatically adjusts for daylight savings time. The radio controlled clock includes a signal strength indicator.

The small clock size and battery power makes it a great travel companion.

Note: The radio controlled clock only supports the continental USA. otherwise, the clock can be set manually. Arizona does not observe daylight savings time (DST). Thus, users must set to the pacific time zone during DST.

About Radio Controlled Clocks

Atomic clocks, radio controlled clocks or exact set clocks are all different names for clocks that keep perfect time by automatically synchronizing to the radio signal emitted from the U.S. Atomic Clock in Colorado.

Radio controlled clocks reset daily to the split second, and adjust automatically to Daylight Savings Time, Leap Year and Time Zone changes.

Time and temperature projection

Project time and temperature on the ceiling or wall.

The ClearView Projection Clock includes a focus adjustment dial for a crystal clear projection. In addition, the projection can be reversed 180 degrees for optimal viewing throughout the room.

Radio controlled date and time

Equipped with an atomic clock, time is set automatically via radio and in synch with the U.S. atomic clock for utmost accuracy and automatically sets adjusts for daylight savings time.

Simply enter your time zone (Pacific, Mountain, Central and Eastern).

Indoor temperature

Temperature is measured within the display console (Fahrenheit and Celsius).

The temperature is displayed on the clock face and projected on the wall or ceiling.

Time alarm with snooze

The alarm clock features a bright back-lit screen with time, month/date, day of week and indoor temperature, a crescendo alarm clock and snooze feature.

The ClearView Projection clock is the ideal bedside companion.

Product description

Project the time, indoor temperature and outdoor temperature on the ceiling or wall. The ClearView Projection Clock includes a focus adjustment dial for a crystal clear projection. In addition, the projection can be reversed 180 degrees for optimal viewing throughout the room. The indoor and outdoor temperature scroll automatically. Equipped with an atomic clock, time is set automatically via radio, and in synch with the U.S. atomic clock for utmost accuracy. The alarm clock features a bright backlit screen with time, month / date, day of week indoor temperature, outdoor temperature, an alarm clock and snooze button. The wireless sensor can be placed anywhere (inside or outside) wherever you want to measure temperature remotely. Includes degF or degC switch. Communicates via a 433 MHz wireless signal up to 300 feet (100 feet under most conditions).

• Radio Controlled Clock Automatically Adjusts date and time to the Split Second and Daylight Savings Time
• Projection (time, indoor and outdoor temperature) on a 3" x 1.5" screen
• Indoor and wireless temperature sensor
• Choose to display temperature reading in Farenheit or Celsius
• Alarm with Snooze

User questions & answers

Question:	With multiple sensors, which temperature is displayed or does it just cycle through them
Answer:	I don't recall. I had to dig some on the La Crosse website to get the information
Question:	Where can you get instructions on how to set time etc. on model WS
Answer:	This is compatible sensor for model 308-1412S.
Question:	Do you have a clock with multiple remotes? So you can get outside temp as well as temp in greenhouse
Answer:	Compatible with the following models: 308-1414B, 308-1414w, 308-1414MB, 308-1425B, 308-1425c, S87078 and S88907
Question:	Does the main face of the clock turn off? So I just see the projection on the ceiling
Answer:	I believe so, but unless you are using it for an indoor measurement I wouldn't consider it. This unit is "weather resistant" not "weather proof." I have been through three of them in the last three years because shifting winds in a storm soaked it. I am getting rid of the unit as a result.

Product features

Projection with backlight

Features focus, adjustable arm and reverse projection

Project the time, indoor temperature and outdoor temperature on the ceiling or wall.

The ClearView Projection clock includes a focus adjustment dial for a crystal clear projection.

In addition, the projection can be reversed 180 degrees for optimal viewing throughout the room.

Frequently Asked Questions (FAQs)

1. Q: How do I resynchronize the remote sensor if the signal is lost?

A: Press and hold the Down key for five seconds. The display will show dashes (--.-). Wait several minutes for the sensor to resynchronize.

2. Q: How do I toggle between 12 Hour and 24 Hour Format?

A: Press the Down key (do not hold) to toggle between 12 hour and 24 hour format.

3. Q: How long does it take or the Radio Controlled Clock to set?

A: It generally takes a 24 hours to set but can take up to a week.

Place Anywhere Inside or Outside to Monitor Temperature

The wireless sensor can be placed anywhere (inside or outside) wherever you want to measure temperature remotely. Includes degF or degC switch. Communicates via a 433 MHz wireless signal up to 300 feet (100 feet under most conditions).

Add up to three wireless remote sensors for monitoring different rooms or locations in or around your home or business .

Scrolling Sensor Display on the Console

The remote sensors scroll on the projection display, so you can keep an eye on the babies room or wine cellar at night.

Product description

Features:

Projection (time & indoor temperature)

Radio Controlled Clock never needs updating for Daylight Savings Time

Indoor temperature

Choose to display temperature reading in Farenheit or Celsius

Time & date

Alarm with Snooze

LED Backlight

Product Dimensions:

4" L x 2"D x 4.5"H

Includes:

RC-8370 Projection Clock

AC Adapter

User Manual

Three AA batteries not included

• Project the radio controlled time and indoor temperature on the ceiling.
• The rounded alarm clock features a bright backlit screen with time, month / date, day of week and indoor temperature, an alarm clock and snooze button. The feet also light up, enhancing the back lit display.
• Equipped with an atomic clock, time is set automatically via radio and in synch with the U.S. atomic clock for utmost accuracy and automatically sets adjusts for daylight savings time.
• Does not support Alaska and Hawaii Time Zones.

User questions & answers

Question:	How do you change the time zone
Answer:	According to instructions press the mode button, the time zones will appear. There are 4 time zones : P=Pacific, M=Mountain, C=Central and E=Eastern. Press the set button to select your time zone. I hope this helps
Question:	How do you turn on back lite
Answer:	The slide switch on the back turns on first the projection and then both projection and backlight.
Question:	how do I change the time zone
Answer:	If you reference the manual here:http://site.ambientweatherstore.com/Manuals/RC-8370.pdfSection 5.4 Setting the Time ZonePress the MODE button (do not hold) to enter the Alarm Mode. The alarm time will display.Next, press the SET button to select your time zone.Note: There are four time zones to select from: P=Pacific, M=Mountain, C=Central, E=Eastern.If you need further assistance, feel free to email me ([email protected]) or call 480-346-3398.Thanks!Ed
Question:	I have two questions: first, do the dots between the hour and minutes blink and second, how do you tell if the rcc has actually been connected
Answer:	The projected LED : does not blink nor does thw face. The "rcc" does show signal strength on the face as well as date, temp, time zone and DST. You have the option of not lighting the face and only projecting, which is how I have mine setup

Product features

Innovative and Stylish Design

Project the radio controlled time and indoor temperature on the ceiling with this innovative design. Includes a 180 degree reverse projection button that flips the projected image.

The contemporary alarm clock features a bright backlit screen with time, month / date, day of week and indoor temperature, an alarm clock and snooze button. The feet also light up, providing a remarkably bright night light.

Equipped with an atomic clock, time is set automatically via radio, and in synch with the U.S. atomic clock for utmost accuracy.

The practical clock automatically adjusts for daylight savings time.

The inventive design features an audio and visual (blinking) alarm, and the projection can be reversed 180 degrees.

In addition, the projection, backlight, and night light can be independently selected on or off.

The alarm and snooze can be easily enabled or disabled from the Snooze/Light button on the top of the clock.

Also includes an energy efficient, UL rated AC adapter (Class 5) which insures your projection and back light are always lit. Back up batteries (3 x AA) provide power for travel and outages.

Notes:

Does not support Alaska and Hawaii Time Zones.

The angle of the projection can not be adjusted. The clock will always project straight up.

The images in this section are for the silver version of the clock. Check the product page for color before ordering.

Front View

The LCD displays time, date, day of week, time zone, and indoor temperature, as well as alarm settings.

Buttons provide easy access to different modes and programming the clock.

Side View

The night lights on each side brighten the room with the soft glow of the blue back light.

Back View

Turn the projection, back light and night light on or off with controls on the back of the clock. The reverse projection and battery compartment is also on the back.

Top View

The projection light is on the top. Press the Snooze/Light to temporarily turn on the projection and back light when running on battery power. The alarm can also be silenced from the top button.

Product description

Note: The display is powered from an AC adapter, and includes back up batteries, but must be plugged into AC power to continuously view the back light.



The Clock:

Color changing backlit display

Projection (time, indoor temperature)

Indoor temperature sensor

Choose to display temperature reading in Fahrenheit or Celsius

Historical trend data

Records Minimums and Maximums

Time & date

Alarm with Snooze

High contrast reverse PMVA display

Product Dimensions:

6.42" W x 3.19"H x 2.24"D

Includes:

WS-8460 Projection Clock

AC Adapter

CR2032 Battery

User Manual

Specifications:

Indoor Temperature:

Range: 32 to 113 °F

Accuracy: ± 2 °F

Resolution: 0.1

• The colorful RC-8465 projection alarm clock featuring Ambient backlighting and projection time and indoor temperature is easy to read from any distance. The backlight color changes with the temperature.
• The high contrast reverse PMVA display changes color with the indoor temperature, and features bright, vibrant colors against a true, black background.
• The elegant display features date and time, day of week, and indoor temperature.
• The Ambient Color changing backlighting can be manually set to any of 256 colors, or automatically change colors based on the indoor temperature.
• Project the time and indoor temperature on the ceiling or wall. The ClearView Projection Clock includes a focus adjustment dial for a crystal clear projection. In addition, the projection can be reversed 180 degrees for optimal viewing throughout the room.

User questions & answers

Question:	Atomic clock will this synchronize with the time server in colorado because some people in their review had difficulties is this true? thank you
Answer:	It has both. The clock itself is powered by two AA batteries. The projection light that displays the time on the ceiling or elsewhere is powered by a low voltage transformer with a cord and plug. The clock will function by itself without external power, but to see it on the ceiling you need to have the transformer and cord plugged in with AC power.
Question:	What is the time interval between alarms when using the snooze function
Answer:	the bulb is built in & doesn't look like it could be replaced. I think it would last the life of the weather radio.
Question:	People are having issues with the time setting/adjusting automatically; why is that? For those affected, is it just this or w/ any clock of this sort
Answer:	You must press the SNOOZE/LIGHT button and then the REVERSE button.If you reference the manual here:http://site.ambientweatherstore.com/Manuals/rc8427.pdfIt is referenced in Section 5.6.2.
Question:	Does the ac adaptor accept 220v? also, is the radio controlled clock compatible with the european frequency (dcf77) or does it read only the us one
Answer:	No, it will always project both at the same time.

Product features

Ambient Weather RC-8465 Radio Controlled Projection Alarm Clock

The colorful RC-8465 projection alarm clock featuring Ambient backlighting and projection time and indoor temperature is easy to read from any distance. The backlight color changes with the temperature.

Equipped with an atomic clock, time is set automatically via radio, and in synch with the U.S. atomic clock for utmost accuracy.

The practical clock automatically adjusts for daylight savings time.

The high contrast reverse PMVA display changes color with the indoor temperature, and features bright, vibrant colors against a true, black background.

The elegant display features date and time, day of week, and indoor temperature.

The Ambient color changing backlighting can be manually set to any of 256 colors, or automatically change colors based on the indoor temperature.

Project the time and indoor temperature on the ceiling or wall. The ClearView Projection Clock includes a focus adjustment dial for a crystal clear projection. In addition, the projection can be reversed 180 degrees for optimal viewing throughout the room.

The clock features a dual alarm and snooze button.

Notes:

The display is powered from an AC adapter, and includes back up batteries, but must be plugged into AC power to continuously view the back light.

Includes:

- WS-8465 Projection Clock.

- AC Adapter.

- CR2032 Battery.

- User Manual.

Cold White

Violet

Light Blue

Light Aqua

Light Green

Yellow

Orange

Red

Product description

Project the radio controlled time and indoor temperature on the Ceiling with this innovative design. The contemporary alarm clock features a bright backlit screen with time, month/date, day of week and indoor temperature, an alarm clock and snooze button. The feet also light up, providing a remarkably bright night light. Equipped with an atomic clock, time is set automatically via radio, and in synch with the U.S. Atomic clock for utmost accuracy. The practical clock automatically adjusts for daylight savings time. The inventive design features an audio and visual (blinking) alarm, and the projection can be reversed 180 degrees. In addition, the projection, backlight, and night light can be independently selected on or off. The alarm and snooze can be easily enabled or disabled from the snooze/light button on the top of the clock. Also includes an energy efficient, UL rated AC adapter (class 5) which insures your projection and back light are always lit. Back up batteries (3 x AA) provide power for travel and outages. Note: does not support Alaska and Hawaii time zones.

• Projection (time & indoor temperature)
• Radio controlled clock never needs updating for daylight savings time
• Choose to display temperature reading in Fahrenheit or Celsius
• 180 Degree reverse projection button
• Independently control backlight, nightlight and projection

User questions & answers

Question:	How loud is the alarm
Answer:	Not very loud. And it’s just a beep. But the room temp and time on the ceiling is a nice feature
Question:	Is the projection constant or do you have to press a button to project the time
Answer:	It is either or.....which is nice. I keep mine on "constant" so in the middle of the night I can just look up to check the time. This is my second Ambient clock - Ambient JUST illuminates the time and temp on the ceiling without a backlight - the others, which I have purchased and returned, have backlighting which tends to light up the room way too much. I highly recommend this clock - my initial one lasted over 15 years and read the instructions because you can change the direction 180 degrees Good Luck!
Question:	Can someone tell me why my clock (brand new) keeps jumping ahead 3 hours at night?? Tried resetting it several times and it keeps doing it
Answer:	It appears you have the wrong time zone set. I am guessing you live in the Pacific Time Zone and you set the Eastern Time Zone by mistake. The manual helps you change the time zone back to Pacific.
Question:	Hummm. this says it's a radio controlled clock. but is it also a am fm radio also? or no
Answer:	No, it is radio controlled time but not an AM/FM clock radio. Atomic clocks, radio controlled clocks and exact set clocks are all different names for clocks that keep perfect time by automatically synchronizing to the radio signal emitted from the U.S. Atomic Clock in Colorado. Radio controlled clocks reset daily to the split second, and adjust automatically to Daylight Savings Time, Leap Year and Time Zone Changes.

Product features

Innovative and Stylish Design

Project the radio controlled time and indoor temperature on the ceiling with this innovative design. Includes a 180 degree reverse projection button that flips the projected image.

The contemporary alarm clock features a bright backlit screen with time, month / date, day of week and indoor temperature, an alarm clock and snooze button. The feet also light up, providing a remarkably bright night light.

Equipped with an atomic clock, time is set automatically via radio, and in synch with the U.S. atomic clock for utmost accuracy.

The practical clock automatically adjusts for daylight savings time.

The inventive design features an audio and visual (blinking) alarm, and the projection can be reversed 180 degrees.

In addition, the projection, backlight, and night light can be independently selected on or off.

The alarm and snooze can be easily enabled or disabled from the Snooze/Light button on the top of the clock.

Also includes an energy efficient, UL rated AC adapter (Class 5) which insures your projection and back light are always lit. Back up batteries (3 x AA) provide power for travel and outages.

Notes:

Does not support Alaska and Hawaii Time Zones.

The angle of the projection can not be adjusted. The clock will always project straight up.

The images in this section are for the silver version of the clock. Check the product page for color before ordering.

Front View

The LCD displays time, date, day of week, time zone, and indoor temperature, as well as alarm settings.

Buttons provide easy access to different modes and programming the clock.

Side View

The night lights on each side brighten the room with the soft glow of the blue back light.

Back View

Turn the projection, back light and night light on or off with controls on the back of the clock. The reverse projection and battery compartment is also on the back.

Top View

The projection light is on the top. Press the Snooze/Light to temporarily turn on the projection and back light when running on battery power. The alarm can also be silenced from the top button.

Product description

The Ambient Weather RC-1200BWDN turns an ordinary wall clock into an extraordinary, accurate time piece with the radio controlled time. The clock automatically synchronizes the time several times a day based on a radio signal from Fort Collins, Co (WWVB). the radio controlled clock never needs resetting and is accurate to the second. The clock automatically adjusts for daylight savings time and your time zone. An override daylight savings time feature is available for residents in Arizona. The reception attempt for the daily automatic synchronization with the radio time is performed several times a day. One successful synchronization per day is sufficient to accurately set the clock to the second. Includes four time zone settings (Pacific, Mountain, central and Eastern). the movement is nearly silent due to the ultra-lightweight hands. The lightweight hands also extend the battery life, reducing the motor workload.

• Any
• Imported
• The Ambient Weather RC-1200BWDN turns an ordinary wall clock into an extraordinary, accurate time piece with the radio controlled time
• The clock automatically synchronizes the time several times a day based on a radio signal from fort Collins, Co (WWVB). the radio controlled clock never needs resetting and is accurate to the second
• The clock automatically adjusts for daylight savings time and your time zone. An override daylight savings time feature is available for Residents in Arizona
• The reception attempt for the daily automatic synchronization with the radio time is performed several times a day
• One successful synchronization per day is sufficient to accurately set the clock to the second

User questions & answers

Question:	Is the outer frame of the clock wood or plastic
Answer:	It us not. It is plastic but looks really nice. Might be like a plastic wood kind of.
Question:	One answer said the clock does make ticking sounds, and another answer said clock makes no noise. Which one is correct
Answer:	It is really quiet. Hardly can hear the ticking sound. I'm using the clock in the church's sanctuary and it makes no noise.
Question:	Sound of the 2nd hand.... is is quiet? loud ? medium? will i hear it in a quiet room 10 ft. away
Answer:	You can only hear it if there is no other sound in the room. I can hear my other clock in the room about 35 feet away louder than this clock. It is very quiet, but I find the sound of the ticking soothing. It reminds me of a old time clock. To me that is a positive feature of the clock.
Question:	Does it have a loud ticking noise
Answer:	I bought this clock ( Ambient Weather RC-1200WS ) and while it picks up WWV well, I find the ticking loud and annoying.

Product features

with Black / White, Inner Minute Markers

The Ambient Weather RC-1200BWDN turns an ordinary wall clock into an extraordinary, accurate time piece with the radio controlled time.

The clock automatically synchronizes the time several times a day based on a radio signal from Fort Collins, CO (WWVB). The Radio Controlled Clock never needs resetting and is accurate to the second.

The clock automatically adjusts for daylight savings time and your time zone. An override daylight savings time feature is available for residents in Arizona.

The reception attempt for the daily automatic synchronization with the radio time is performed several times a day. One successful synchronization per day is sufficient to accurately set the clock to the second.

Includes four time zone settings (Pacific, Mountain, Central and Eastern).

The movement is nearly silent due to the ultra-lightweight hands. The lightweight hands also extend the battery life, reducing the motor workload.

Frequently Asked Questions:

Q: How long does it take for the clock to set?

A: Wait at least 24-48 hours. Solar interference during the day can prevent the clock from receiving the radio controlled signal from Fort Collins, CO.

Q: How do I operate this clock?

A: It's easy.

1. Set Time Zone and Daylight Savings Time switch.

2. Insert the battery.

3. Hang the clock on the wall.

4. Wait 24-48 hours for the correct time to set.

Q: Can I use this outside of the Continental USA?

A: No, sorry. the clock is not for use outside of the continental USA (the time zones are not supported and the radio signal is weak).

Product description

The WS-3000-X8 monitors and graphs eight wireless remote sensors at the same time. The comprehensive data Logger includes a TFT full color display with graphing and monitoring of temperature, humidity, dew point, and heat index. You can view channel 1 temperature, dew point or heat index from user friendly display. You are also able to monitor up to 8 channels at the same time, using imperial or metric measures. Includes minimum and maximum temperature and humidity display with easy reset option.



The outdoor remote sensors includes dip switches for channel selection and units of measure (degF vs degC). High and low alarms can be set for any of the measured parameters; audible and visual alarm will sound when a value is out of range. The sensor search mode allows you to re-sync sensors without removing and re-inserting batteries. Optional temperature and humidity calibration is provided for the utmost accuracy, although the measurement can be adjusted from the console to calibrate to a known source.



The clock includes 24 time zones throughout the world and automatically synchronizes several times a day based on a radio signal from Fort Collins, Co (Wave). It automatically adjusts for daylight savings time and your time zone. An override daylight savings time feature is available for residents in Arizona. The radio controlled clock never needs resetting and is accurate to the second.



Specifications:

Outdoor temperature range (lithium batteries): -40°F to 140°F

Outdoor temperature range (non-lithium batteries): -4°F to 140°F

Indoor/Outdoor Humidity range: 10% to 99%

Transmission range: up to 300 feet line of sight (100 feet under most conditions)

Frequency: 915 MHz

Update Rate: 60 seconds

• Graphs eight wireless remote sensors at the same time (included)
• Includes PC software for advanced data analysis, console programming and easy data extraction from the optional micro-SD card
• Sensor Dimensions: 4.75 x 1.5 x 0.6 in
• Console Dimensions: 3.25 x 4.5 x 0.375 in (base 1.5")
• AC Adapter included for main unit; sensors each require 2 x AA batteries (not included)

User questions & answers

Question:	I can't find the option to turn off the graph and just show the sensors. I also can't find the way to show sensors 6, 7 and 8 when the graph is on
Answer:	Yes it will. You can use up to 8 of the temp/humidity sensors
Question:	Is there an option in the pc software to export the sensor data to some type of text file so it can be used in other applications (like excel)? thx
Answer:	Yes.
Question:	what battery size
Answer:	My farthest ones are about 50 feet away and the signal must go through 2 exterior walls and they work great. I use 5 sensors in total and 3 of them are 50 feet away.
Question:	Does the one with 8 sensors really not offer graphing
Answer:	As I see it on the Ambient page, I see temperature, humidity, and wind trending data that spans more than a week. The rain data is displayed as daily, weekly, monthly, and annually.

Product description

Simple to read, simple to use, and affordable, the WS-10-X4 (ws-10) includes an indoor thermo-hygrometer inside the console, and four remote thermometer-hygrometer sensors (f007th), which are all displayed at the same time. The display console can remotely read and update up to eight remote thermo-hygrometer sensors. The console includes audible and visual alarms when temperature and humidity exceed your pre-set minimum and maximum alarm settings. The WS-10-X4 includes four remote thermometer-hygrometers, and four additional sensors can be added (f007th, f007tp, f007t, f007pf) for comprehensive monitoring. The console displays temperature and humidity, minimum and maximum temperature and humidity, which can be manually reset. The scroll mode allows you to view the indoor thermometer-hygrometer and channels 4 through 8 without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals. Each remote sensor includes Dip switches for channel selection and units of measure (degf Vs degc). the sensor search mode allows you to re-sync sensors without removing and re-inserting batteries.

• The WS-10-X4 (ws-10) includes an indoor thermo-hygrometer inside the console, and four remote thermometer-hygrometer sensors (f007th), which are all Displayed at the same time
• The display console can remotely read and update up to eight remote thermo-hygrometer sensors
• The console includes Audible and visual alarms when temperature and humidity exceed your pre-set minimum and maximum alarm settings
• Four additional sensors can be added (f007th, f007tp, f007t, f007pf) for comprehensive monitoring
• The console displays temperature and humidity, minimum and maximum temperature and humidity, which can be manually reset

Product features

The WS-10-X4 with Four Remote Sensors

Simple to read, simple to use, and affordable, the WS-10-X4 includes an indoor thermo-hygrometer inside the console, and four remote thermometer-hygrometer sensors (F007TH), which are all displayed at the same time. The console includes audible and visual alarms when temperature and humidity exceed your pre-set minimum and maximum alarm settings.

The console displays temperature and humidity, minimum and maximum temperature and humidity, which can be manually reset. The scroll mode allows you to view the indoor thermometer-hygrometer and channels 4 through 8 without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals. The console also includes an optional temperature and humidity calibration feature for the utmost accuracy.

Abundant Applications

Applications include measuring multiple temperature and humidity locations at the same time (both inside and outside), including different rooms of a house or building, drying rooms, humidors, and wine cellars.

Note:

Channel 4 takes the place of the indoor sensor on the display and can be programmed to scroll between indoor and Channel 4.

Supports up to 8 Wireless Sensors

The display console can remotely read and update up to eight remote thermo-hygrometer sensors. The WS-10-X4 includes four remote thermometer-hygrometers, and five additional sensors can be added (FT012TH, F007TH, F007TP, F007T, F007PF, F008PFN) for comprehensive monitoring.

Special Notes and Caveats

The high and low alarm feature is only available for indoor, channel 1, 2 and 3 sensor locations. The wireless signal will not penetrate solid metal or earth.

The Remote Sensor Includes LCD Display and Channel Designation

Each remote sensor includes dip switches for channel selection and units of measure (degF vs degC).

Product description

The WS-3000-X5 monitors and graphs five wireless remote sensors at the same time. The comprehensive data Logger includes a tft full color display with graphing and monitoring of temperature, humidity, dew point and heat index, and allows you to monitor up to 8 channels at the same time. The clock automatically synchronizes the time several times a day based on a radio signal from Fort Collins, Co (Wave). the radio controlled clock never needs resetting and is accurate to the second. The clock automatically adjusts for daylight savings time and your time zone. An override daylight savings time feature is available for residents in Arizona.

• Graphs eight wireless remote sensors at the same time (5 included)
• Includes PC software for advanced data analysis, console programming and easy data extraction from the optional micro-SD card
• Sensor Dimensions: 4.75 x 1.5 x 0.6 in
• Console Dimensions: 3.25 x 4.5 x 0.375 in (base 1.5")
• AC Adapter included for main unit; sensors each require 2 x AA batteries (not included)

User questions & answers

Question:	How can i operate two consoles with their own remotes? i currently have one, i want to add one more. total 10 sensors (5 per unit
Answer:	I have had 8 remotes for 7 months with standard alkaline batteries, had to change only one set since. If placing in hard to get to locations you may want to consider lithium ion batteries.
Question:	What is the range & accuracy of the humidity sensors
Answer:	I don't think so. The list of compatible devices doesn't seem to list the WS-50. You might check with Ambient Weather for a definitive answer.
Question:	Is it possible to write my own software to pull temperature and humidity data from the console via USB
Answer:	Yes it will work
Question:	what memory size sd cards are supported
Answer:	Over a period of time, high humidity and condensation may have an effect on the electronics of the remote sensor. It is not weatherproof. I would place the unit in a sheltered location or in an enclosure that would limit exposure to direct moisture. Replacement remote sensors are relatively inexpensive at about $14. I have extensive experience with electronics.

Product description

Ambient Weather professional weather station allows you to monitor your home and backyard weather conditions with the brilliant, easy-to-read LCD color display. The enhanced Wi-Fi connectable option that enables your station to transmit its data wirelessly to the world's largest personal weather station network, weather underground. Experience the convenience of having your personal weather information with you on the go using your computer, tablet, or mobile device. In addition to underground, the weather station supports uploads to weather bug and weather cloud. The weather station measures wind speed, wind direction, rainfall, outdoor temperature and humidity, solar Radiation and UV. Also included inside the console is temperature, humidity and barometric pressure. The weather station also calculates dew point, wind Chill and heat index. The Osprey streams weather data real time (approximately 16 second updates) to the weather underground website, the best website for collecting and storing real-time personal weather station data. Send real time data to weather bug website. Weather bug backyard tracking Stations empower weather enthusiasts to get their name on the map and have their tracking Stations' data seen by millions of users via the weather bug application. Send real time data to weather cloud website. Weather cloud makes managing your device not only easy, but fun. Access the app from your computer, tablet or smartphone and enjoy the same user experience across all devices.

• Allows you to monitor your home and backyard weather conditions with brilliant, easy-to-read LCD color display
• Wireless all-in-one integrated sensor array measures wind speed/direction, temperature, humidity, rainfall, UV and solar radiation.
• Supports both imperial and metric units of measure with calibration available
• Enhanced Wi-Fi connectability option that enables your station to transmit its data wirelessly to the world's largest personal weather station network
• Pole Mount and 3 x AAA batteries not included

User questions & answers

Question:	Can i use 2 separate display consoles with the ambient weather ws-2902? i'd like to see readings in 2 different areas of the house
Answer:	I have two display consoles and it works great. One upstairs and one on ground floor. I can see both on-line and on phone via app. I set alerts in case HVAC issues, which is great benefit as well. I ordered WS-2902A-CONSOLE-KIT which is what you need.
Question:	Can it only be line of sight
Answer:	Wireless devices transmit a radio frequency (RF) signal, generally in the 400 – 900 MHz range. The manufacturer will rate the maximum transmission distance as line of sight. However, the signal will transmit through walls and other obstructions. The following is a table of reception loss vs. the transmission medium. Each “wall” or obstruction decreases the transmission range by the factor shown below. Medium RF Signal Strength Reduction Glass (untreated) 5-15% Plastics 10-15% Wood 10-40% Brick 10-40% Concrete 40-80% Metal 90-100% RF will not transmit through metal barriers. If you have aluminum siding or a metal roof, it is unlikely the RF signal will transmit through this barrier. RF will not transmit through earth. For example, if the receiver is placed in the basement, and the earth or ground is obstructing the line of sight transmission, it will not receive the signal. Interference can be an issue. In general, wireless internet, phones, security systems and other low power devices have little interference effect. Ham Radio and other high power applications may lose data when transmitting. Helpful Hint: Wireless phones transmit at similar frequencies and power levels as wireless weather devices. If you have a wireless phone (not a cell phone), place the receiver where you would place the weather station receiver and attempt to use the phone where you would place the transmitter. If you can not use the wireless phone, it is unlikely the weather station will work either.
Question:	Is the outdoor sensor "hi quality"? I have had 2 Acurite outdoor sensors electronics fail in a 1 Yr. I am a full time Rv'r / camp in any weather
Answer:	My Accuwrong failed in the 13th month and support from Accurite was horrible at best. I had an Amibeint for over 10 years but the ws 2902 is not working, they sent me 3 replacement units all with the same issue, NOT TRANSMITTING.
Question:	What differentiates this from higher priced options like the ws-1002-wifi? Software connectivity doesn't matter to me. Are the sensors lower quality
Answer:	No, they are of equal quality. The console on the WS-1002-WiFi is much nicer with multiple screens and TFT display. This is LCD with color film. The WS-2902 is a very capable unit.

Product features

AmbientWeather.net

With our weather stations, sensors, and cloud service, Ambient Weather has developed a suite of tools that seamlessly stream real-time weather conditions to the internet, enabling a community of weather professionals and enthusiasts who, together, create a rich network of weather data spanning the globe.

Quickly view detailed information with our animated expandable modules. Features dials, gauges, graphs and text reports for every parameter. Monitor indoor and outdoor conditions, including wind speed, wind direction, rainfall, UV, solar radiation, indoor temperature, indoor humidity, barometric pressure, dew point, heat index, wind chill and more.

AmbientWeather.net

Our mobile friendly and responsive design allows you to customize your dashboard, analyze graphs, generate reports, and send email or text alerts to protect your possessions in and around your home or business.

AmbientWeather.net works with IFTTT, Amazon Alexa, SmartThings, Home Assistant, Weather Underground and PWSWeather, to name a few. The Ambient Weather Dashboard app is also available at Google Play and the Apple App Store.

AmbientWeather.net

Easily accessible to anyone with an internet connection, this community offers robust, meaningful weather information—right from the backyard of a trusted neighbor, friend, or colleague.

Our mapping platform combines our large weather station network with live radar, temperature and wind overlays, and accurate pinpoint forecasting for any location on earth.

AmbientWeather.net

Visualize your data with daily, monthly and yearly graphs, or customize your graphing interval. The expandable tiles and handy charts and graphs allow your to analyze your data. To further analyze the data, download csv files.

If you just need a quick update, set up email or text alerts for high and low conditions for every parameter. You can send multiple alerts for the same parameter, and view all past alerts in a handy timeline.

Virtual Assistants

The Ambient Weather skill for Alexa and Google Assistant provides Ambient Weather personal weather station owners with the ability to get real-time, and past weather information generated by the devices they have been linked to.

IFTTT Applets

The AmbientWeather server features a handy timeline for tracking IFTTT triggered web services, applets, and devices like blinds, rain gauges, and lights.

API & Third Party Apps

Developers, retrieve your own real-time and historical personal weather station JSON formatted data, or build 3rd party apps and get data from multiple devices.

Weather Networks

Connect to the world's largest personal weather station network, Weather Underground, in addition to WeatherCloud and WeatherBug.