14 best regulator with hoses

Product description

Specifications: Product length: 3'. (91. 4 cm)product weight: 14 oz. inlet: 3/8” flare fitting male QCC (acme)outlet: 5/8” – 18 UNF pressure: low pressure 1PSI description: - Made to last with high quality materials>- simple installation with no tools required - Made to fit QCC-type-1 connections - used for a variety of propane gas appliances

• ✓ A TOP QUALITY PROPANE REGULATOR AND HOSE - maxing out at 80, 000 BTU, this 3Ft low pressure propane regulator is fiber reinforced to ensure quality performance. The hose is the perfect fit for a wide variety of grills, fire pit tables, and other propane appliances
• ✓ LONG LASTING AND DURABLE - Gas One’s 2106 Low Pressure Propane Regulator provides an air-tight connection for your propane appliances. Made with high quality rubber and brass connections, the 2106 ensures a stable connection and a leak-free experience
• ✓ MEASUREMENTS- The 2106 Propane Hose measures at 3ft long (91. 4cm) and is made to have a secure fitting with type-1 (QCC-1) propane tank connections. The hose has an inside ⅜-inch flare fitting and has an outside diameter of ⅝ inches
• ✓ READY FOR US - The low pressure hose is ready to use right out of the box and requires no additional tools to set up. Simply connect the regulator to the tank and appliance when ready to use

User questions & answers

Question:	well this work on my oklahoma joes modle
Answer:	Should be a standard size fitting.
Question:	Looking for a hose that has these specifications
Answer:	Rusty, This hose will work. The size is correct. However, I purchased this hose: Gas One 4 ft High Pressure Propane 0-20 PSI Adjustable Regulator with QCC-1 type Hose - Works With Newer U.S. Propane Tanks. I had to return two of the hoses you are asking about, because I could not control the flames. With the new hose, the grill works perfectly again. Hope this helps. Good luck!
Question:	How many inches of water column is this regulator
Answer:	Approximately 27 inches of water column
Question:	will this fit a Weber Genesis 300 gas grill
Answer:	I used it on my Weber Genesis 310 grill, and the flames were insane, had to go out and by a Weber brand regulator to get proper flames.

Product description

Camco RV Brass Water Pressure Regulator helps to protect the RV plumbing and hoses from damage caused by high pressure city water. Reduce water pressure to a safe, consistent 40–50 lbs of operational pressure. Protects equipment and prevents hose failure, to help prolong equipment life. (FGH x MGH) Patented. For outdoor use only.

• Helps protect RV plumbing and hoses from high pressure city water
• Attaches easily with 3/4" garden hose threads
• Durable brass construction that is drinking water safe
• Reduces water pressure to a safe and consistent 40 50 pounds of pressure
• CSA low lead content certified. Complies with California's AB1953 and Vermont Act 193, Maryland HB 372, and Louisiana HB 471 low lead content laws

User questions & answers

Question:	after 5 years this has started to leak between inlet and outlet. is it repairable or just throw away
Answer:	Have run a small campground for 50+ years. This type of regulator is highly susceptible to tiny sand or debris in the water lines. A fine screen filter helps but only minimally. Have flushed these in every which way trying to clean - not much luck. If any consolation, junk brass can bring up to $3.00 lb!!
Question:	What size are the fittings? 1/2" or
Answer:	Neither, they are the same size that will fit any outside faucet or garden hose. According the American National Standards Institute, garden hose thread--GHT--has an outside diameter of 1.0625 inches with 11.5 threads per inch.
Question:	I live in an apartment and the pressure is often low when they're watering the lawns. What is minimum input pressure for 40 lb regulated output
Answer:	Regulating your water won't help. You'd have to take that up with management about the sprinklers. The issue may be that they're using 1" or larger pvc pipe for the sprinklers which means there's a pressure drop because there's not enough water flow to support it. they could contact the water company to adjust the pressure regulator for the main water line which should support the demand for the sprinklers.
Question:	Can this be used on a standard yard waterhose? Can the pressure be adjusted to a low and/or off level
Answer:	Yes, standard water hose. No, pressure cannot be adjusted. You can add a shutoff valve before the pressure valve if you want to adjust the volume flow.

Product features

Water Pressure Regulator - 3 / 4" Brass

Camco Brass Water Pressure Regulator helps to protect the RV and boat plumbing and hoses from damage caused by high-pressure city water. Reduce water pressure to a safe, consistent 40–50psi of operational pressure. Protects appliances, plumbing fixtures, and prevents hose failure, to help prolong equipment life.

- Helps protect RV and boat appliances, plumbing fixtures, and hoses from high-pressure city water.

• Connects to QCC1/Type1 LP tanks and cylinders，fits to gas grills, heaters ,fire pit table and most QCC1/Type 1 low pressure gas application.Great for BBQ, camping, tailgating, heating needs or having an outdoor cookout.
• Replacement for Weber Genesis 300-series gas grills, Genesis Silver C, Genesis Gold ,Genesis Platinum , Spirit E-210/E-310 etc. and most of Char-broil gas grill with side burner,Dyna-Glo dgp350snp-d,mfa350bnp/mfa350cnp ge530bsp-d, dge486ssp-d, dge486gsp-d etc.,Uniflame GBC873W-C, GBC873W, GBC940WIR, GBC940WIR-C, GBC976W, GBC956W1-C, GBC1076WE-C, BH12-101-001-02 etc., most of Kenmore gas grill and most of Brinkmann gas grill.
• 3/8-inches flare fitting has an outside diameter of 5/8-inches in order to accommodate the flare seat,The Maximum 95, 000BTU per hour, low pressure propane regulator with 6feet/72inch Low Pressure LPG hose for propane gill and fire pit table, strong hose will last for a long time
• Easy installation - No tools required, tool-less attachment to tank. It is normal if you hear noise in the regulator, it is the resonance of the gas in the regulator.
• Provides secure, air-tight connection between grill or fire pit and tank, no gas leaks, ensures safety while using grill, no issues with regulator or gas, air flow is kept stable and at appropriate levels

User questions & answers

Question:	what is the purpose of a "low pressure" hose like this versus other basic adapter hoses
Answer:	Propane in the tank is pressurized to a much higher pressure than most appliances can use. Therefore the tank pressure needs to be reduced. A low pressure hose includes a pressure regulator that reduces the tank pressure to a pressure that the appliance can use. Some appliances use a built-in regulator and can use an unregulated or high pressure hose. If the appliance doesn't have a built-in regulator you usually must use a low pressure hose. if
Question:	Will this work with a 30000 btu blue flame mr heater(to attach it to a 20 lb propane tank)? Will I need anything else? Thanks
Answer:	It worked good on my 20,000 btu Mr heater ,but u might want to go with a two stage pressure reducer with ur 30,000 & I also did everything on the instructions with my Mr heater
Question:	can I use this for Mr Big Buddy heater
Answer:	Ini use mine for a small heater I asume yes
Question:	Can i use steak saver adapter so it work to attach 20lb tank this with small portable bbq grill (that take little 1lb green one
Answer:	i don't think so it would run out out fuel quick a 1lb would only work a few minutes time you heat up the area on high you'll be out of fuel with the big tank 20 lb you can put the unit on low and it will keep you warm it takes the chill out of the air

Product description

High Quality Material:100% solid brass can be effective corrosion protection.

Ensure Your Safety:Our propane regulator with hose has excess flow protection for your safety and will automatically shut off.

Convenient Installation: Installs quickly and easily tool-less attachment to propane tanks and cylinders.

Apply to: Gas grills ,heaters, lanterns, camp stoves, tabletop grills, fire pit table and more.

Great for: BBQ, camping, tailgating, heating needs or having an outdoor cookout.



Product Specification:

Type:Low pressure（Parallel）

Inlet Pressure:25-250 PSI

Outlet Pressure:11" W.C.

Flow Capacity: 95000 BTU/Hour

Certificate:CSA

Length:3.5 feet /42 inch (length of rubber hose only)



For your safety, please read before using the hose.

Attention:

1.FULLY TIGHTENED at both propane tank side and grill side before using on your propane appliances.

2.Check and make sure the hose is away from the OPEN FIRE before installing it to your appliances.

3.Keep the hose away from HIGH TEMPERATURE.

• Type-1 (QCC-1) tank connect - fits all appliances with a Type 1 connection. The hose has an inside 3/8 inch flare fitting and has an outside diameter of 5/8 inch.
• Replacement for Weber Genesis 300-series gas grills, Genesis Silver C, Genesis Gold ,Genesis Platinum , Spirit E-210/E-310 etc. and most of Char-broil gas grill with side burner,Dyna-Glo dgp350snp-d,mfa350bnp/mfa350cnp ge530bsp-d, dge486ssp-d, dge486gsp-d etc.,Uniflame GBC873W-C, GBC873W, GBC940WIR, GBC940WIR-C, GBC976W, GBC956W1-C, GBC1076WE-C, BH12-101-001-02 etc., most of Kenmore gas grill and most of Brinkmann gas grill.
• Easy installation - No tools required, tool-less attachment to tank. It is normal if you hear noise in the regulator, it is the resonance of the gas in the regulator.
• Safety & corrosion resistant - CSA certificated - Pass CSA certificate for your safety. Provides secure, air-tight connection between grill or fire pit and tank, no gas leaks, ensures safety while using grill, no issues with regulator or gas, air flow is kept stable and at appropriate levels
• Fits most gas grill, heater, fire pit, lp generator, lantern, two burner camping stove, side burner, and used for most low pressure gas propane application

User questions & answers

Question:	Will this fit a weber Q
Answer:	I can’t guaranty it, but pretty sure this will fit any Weber grill. I don’t have the same model as yours, but it fit mine.
Question:	Will this product work with a twin eagles 50,000 btu burners and 2 17,500 btu burners
Answer:	i think it would work with any propane tank
Question:	Does this work with the Weber Genesis E
Answer:	Take the regulator off your grill. Measure it. This regulator and hose are 24 inches long with a standard propane tank hook-up on one end and a 5/8" opening on the other.
Question:	I want to purchase the hose longer than 2 feet of this brand, where to buy
Answer:	They have 5 feet: https://www.amazon.com/DozyAnt-Universal-Pressure-Regulator-Replacement/dp/B01LW2YZMJ/ref=sr_1_12?m=AXO3Y8HYXC74B&s=merchant-items&ie=UTF8&qid=1493091199&sr=1-1212 feet: https://www.amazon.com/DozyAnt-Universal-Pressure-Regulator-Replacement/dp/B01MXN467A/ref=sr_1_17?m=AXO3Y8HYXC74B&s=merchant-items&ie=UTF8&qid=1493091199&sr=1-17

Product description

MEASURE YOUR PRESSURE – Use Gas One’s built-in PRESSURE GAUGE to determine and regulate your propane PSI. Measuring from 0-60 psi (as well as 1-4 100xKPA), Gas One’s Pressure Gauge lets users control their heat with a precise level of accuracy

• ✓ MEASURE YOUR PRESSURE – Use Gas One’s built-in PRESSURE GAUGE to determine and regulate your propane PSI. Measuring from 0-60 psi (as well as 1-4 100xKPA), Gas One’s Pressure Gauge lets users control their heat with a precise level of accuracy
• ✓ USER FRIENDLY - This Regulator Hose 0-30 PSI adjustable output is must have item for your propane burners, turkey fryers, heaters, smokers and all other propane appliances, Easy to use and good for secure gas flow, No gas leak, Simply connect and go, Extremely reliable
• ✓ DURABLE AND STURDY CONSTRUCTION - Our Propane hose measures 12 ft (144in) long and fits type-1 (QCC-1) tank connections, Long-lasting and reliable, Goes for a long time, Heavy-duty and good for use with high-pressure burners
• ✓ COMPLETELY SAFE- Premium Regulator/Hose for use on turkey fryers, smokers and much more, Good for use with any burners compatible with fit, Ensures safe gas flow
• ✓ STANDARD FITTING - 3/8-inch flare fitting has an outside diameter of 5/8 inches in order to accommodate for the flare seat, Trouble-free and has easy attachment *Tools are required for secure leak free connection to your propane appliance, Output of adjustable 0 to 30PSI

User questions & answers

Question:	Will this work for KitchenAid 740-0781 built in
Answer:	No do not use for in house appliances. It will put out up to 32 psi. Home appliances use 1 or 3 psi regulators.

Product description

Specifications: Product Length: 4'. (48”) Product weight: 1 lb. Inlet: 3/8” flare fitting male QCC (ACME)Outlet: 5/8” – 18 Unpressured: high pressure 0 – 20 PSI (adjustable) Description: Made to last with high quality materials- simple installation with no tools required - made to fit QCC-type-1 connections - used for a variety of high-pressure propane gas appliances

• ✓ User friendly, top quality connection - this high-pressure regulator and hose is adjustable from 0-20 psi with its red knob and has a top notch output for a wide variety of propane appliances from burners and heaters to smokers and fryers
• ✓ LONG LASTING AND DURABLE - Gas One’s 2109 High-Pressure Regulator provides an air-tight connection for your propane appliances. Made with high quality rubber and brass connections, the 2109 ensures a stable connection and a leak-free experience with your heavy-duty appliance
• ✓ READY FOR USE - The high-pressure hose and regulator is ready to use right out of the box. Simply connect the regulator to the tank and appliance when ready to use (tightening with tools suggested for a secure connection)
• ✓ MEASUREMENTS - The 2109 measures at 4ft long and is made to have a secure fitting with type-1 (QCC-1) propane tank connections. The hose has an inside ⅜-inch flare fitting and has an outside diameter of ⅝ inches

User questions & answers

Question:	Will this work in my food trailer with 4 nurners and a griddle
Answer:	It should.
Question:	Why is there a rubber washer in the 3/8 flared? Does that need to be in the for this hose, or can you remove it
Answer:	Supposedly, it's there to create a tighter seal between the regulator & the propane tank. Wouldn't recommend removing it.
Question:	hi does anyone know if this will work with the powerland pd3g8500e tri fuel gas lpg ng generator 8.5kw 16hp. i just bought it. i'm a little nervous
Answer:	It will probably work, but getting the right setting may be difficult. If you try it I would recommend taping the regular nob in place when you get the flow correct. Use the tank/line as a total on and off control for the propane flow. It is is very easy to turn the red knob and change the flow. Also recommend contacting the manufacturer of your generator and asking if it has a lpg regular built in, which it should since flow rates for lpg and ng will not be the same.
Question:	I don"t see a pressure gauge how do you know how much pressure you are applying
Answer:	Hello Amazon Customer! With these type of regulators you want to base your pressure by the performance of the flame, however if your propane appliance is pressure sensitive I recommend going with our regulators that have gauge. 2120: https://www.amazon.com/dp/B07GRFTR4S 2123:https://www.amazon.com/dp/B07GR9T2H3 Thank you! -Gas One

Product description

Every system experiences pressure fluctuations resulting in unwanted flow deviations and over or under-watering. In nursery, home & commercial landscape watering systems, pressures can fluctuate when zones cycle on or off or due to elevation changes in the irrigation system. A water pressure regulator works like an automatic valve to limit higher pressure to a desired constant lower pressure. It is important to maintain the correct operating pressure for optimum droplet size and radius of throw. Despite being an essential part of any drip system, pressure regulators are often not included in drip irrigation kits. Pair with backflow preventer and keep extra handy for irrigation repair, replacement parts, or expansion.

Attributes:

100% water tested for accuracy

Can be installed above or below ground

No external metal parts for excellent corrosion resistance

Maximum flow path resists plugging

Very low hysteresis & friction loss

Preset Operating Pressure: 25 PSI (1.72 bar)

Maximum Inlet Pressure: 105 psi (7.24 bar)

Flow Range: 0.5 - 7 GPM (114 - 1590 L/hr)

Inlet Size: ¾" Female hose thread / Outlet Size: ¾" Male hose thread

Applications: Drip Line, Low Volume, Nursery, Greenhouse, Solid Set, Pivots & Linear Systems

Model #: PRLG-25 / Product #: PRLG253FH3MH

Length: 3.1 inches / Width: 1.6 inches

Note: If you measure PSI of this Pressure Regulator with a Pressure Gauge, please note "End cap" style gauges do not measure accurately because they block flow of water when screwed onto the end of the regulator. The spring inside the regulator only activates when water is actively flowing through it. For accurate results, use a gauge that allows water to flow unblocked through the regulator while measuring.

• Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation. This PRLG (Pressure Regulator Landscape Grade) maintains a constant outlet pressure of 25 PSI (1.72 bar) with a flow range between 0.5 - 7 GPM (114 - 1590 L/hr).
• 100% water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance.
• Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 3/4" outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system.
• Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance.
• Note: This irrigation pressure regulator regulates dynamic water pressure (the pressure while water is flowing). If measuring this regulator with a pressure gauge, do not screw the gauge directly onto the end of the regulator. This blocks the flow of water and measures static pressure, not dynamic pressure. To measure dynamic water pressure, attach a gauge at the end of your irrigation tubing line, or use an inline gauge that allows water to flow unblocked through the regulator.

User questions & answers

Question:	Can I add a fitting to this to make it work with 1/4" drip tubing
Answer:	Actually the hose has several leaks the hose near threaded fitting we don’t use this hose any. Would be nice if you gave us a refund.
Question:	Is npf (national pipe tread) and "hoese thead" really the same thing. the spec sheet impiles that it is. others say its not. whats the scoop
Answer:	B:Bronze connector P: Plastic connector
Question:	Do I need pipe thread tape
Answer:	Yes, of course.But in the cold winter, the water will freeze.
Question:	gph minimum means i need 60 drip emitters at 1/2 gph to meet the 25psi regulation spec. what happens at lower flow rates
Answer:	Yes it works. Slightly higher drip rate than the original hose but fits the system well.

• Control The Flame - It allows you to adjust the pressure to control the flame intensity and turn your grill, turkey fryer or forge other appliance up to any temperature.
• Measure Your Pressure - The pressure gauge to determine and regulate your propane PSI. Measuring from 0-60 psias well as 1-4 100xKPA), it lets users control their heat with a precise level of accuracy
• Perfect Fit - Perfect for gas grills, forge, gas stoves, turkey fryers, fire pit, burners, smokers, cooker, heater, and hot water heater, as long as your appliance connection is 3/8” male flare connector
• Works perfectly - Stainless steel braided it will long-lasting and holds up much better and longer when exposed to the sun and weather
• Universal and Safe - Newly upgraded Standard POL connector can directly connect your appliance to 5lb-40lb LP tank and the hose has excess flow protection and will automatically shut off

User questions & answers

Question:	Where can I submit a claim for guarantee
Answer:	mine was pretty poorly made also
Question:	Can the black qqc1 piece be removed? i just need the adjustable regulator
Answer:	Not on this hose.
Question:	Is this a two stage regulator
Answer:	I am not sure what a two stage regulator is, but I use mine for an outdoor gas fireplace I built. The red dial regulates the flow of the gas so you can turn up the flame or turn it down without having to turn the knob at the tank. Not sure if this helps. Sorry.
Question:	Can i use on my converted gas dryer
Answer:	I have no idea. I personally would not use this for an indoor appliance. This was for my outdoor fireplace that I converted to propane.

Product features

GASPRO 0-30 PSI High Pressure Adjustable Propane Regulator with Gauge is your best choice!

• The propane has a Gauge that will tell you how much pressure you are turning the knot to release gas,Let you adjust your fire better,make your stove/Grill/Buner/Smoker/turkey fryerslike new.
• If the stove/Grill/Buner/Smoker and moreactually needs more or less pressure, you can adjust it with this instead of just being screwed by having the default regulator pressure.
• The propane hose body is made of stainlesssteel it will long lasting for your appliance, Prevent being bitten by smallanimals
• This propane hose with regulator has excess flow protection and will automatically shut off. Protect you from danger.

Specification

- Length: 5 feet / 60 Inch/152.5 cm

- Apply to: propane burners, stove, turkey fryers,heaters, smokers and other propane appliances. Not suitable for appliances which need low pressure regulator.

- Inlet Pressure: 25-250PSIG

- Outlet Pressure: 0-30PSIG

- Max.flow capacity:136000BTU

- End Connector: 3/8" flare swivelnut; Hose connection: 5/8"-18UNF

Warm Tips

In order to use this product more safely,please adjust the regulator to 0 PSI (Off the regulator) firstly before youuse.

• 2016 Improved Version. We have upgraded our brass regulator after examining other reviews; Our new lead-free regulator contains a more durable pressure gauge with oil to prevent friction of internal components, particularly low lead content, well under the lead free requirement, and comes with a 1 Year WARRANTY.
• Lead Free. This regulator was modified to contain lowest amount of lead of any regulator on the market. Each batch of regulators is tested to contain less than .13% lead, well under the NSF lead-free requirements of .25%. Email us for a copy of our testing certification.
• Regulator gauge contains oil to reduce friction of internal components and greatly increases the life of the product.
• Compatible with all U.S. water sources, including 3/4" garden hose threads and NH threads. Contact us for any compatibility questions by clicking on our store name, "Cartlee", and clicking on the ask a question button.
• Adjustable up to 160 PSI. Arrives with easy installation guide. Email us for an additional copy of the guide or quality control test.

User questions & answers

Question:	Can this one be rebuilt if needed
Answer:	U can disassemble I have no idea if parts are available.
Question:	can oil leak into water system
Answer:	No. The oil is in a closed system around the dial. I have never had any oil leakage. This is a fantastic regulator. Love it
Question:	Does this have an adjustable regulator on it
Answer:	On top of the black portion, there is a single slot for a screw driver. Also, a pair of arrows indicating the direction to turn the screw to either increase or decrease the pressure through the regulator. I have found that it works well even though it hasn't been put through a season of use. I am using it in my greenhouse to modify the water pressure in the expandable hose used there. I have a constant pressure pump on my well set at 75 psi and have burst many expandable hoses.
Question:	Hooking this up to my low pressure system in my garden. Will this last for constant use
Answer:	My wife and I bought a couple of acres in Louisiana 5 years ago and set up a Travel Trailer to live in full time. We bought this regulator early in 2017 to bring the pressure down from 86 psi to 48 psi. you wouldn't believe the difference it makes. About every 6 months I've disconnected it to hook up to a test meter to see if anything has changed. It's right where I set it over two years ago. This is one fine piece of craftmanship.

Product features

Installation Guide

Renator - About Our Brand

Outstanding Features

Lead-Free



Lead Free. This regulator was modified to contain particularly low lead levels. Each batch of regulators is tested to contain less than .13% lead, well under the NSF lead-free requirements of .25%.

Product description

It features a 0-20 PSI adjustable high pressure propane regulator with 5ft hose and can be installed quickly and easily to propane tanks and cylinders.

The red knob can be regulated the gas flow and pressure.( Adjustable pressure range: 0-20PSI )

The size of a 3/8 flare nut is 5/8 in order to accommodate for the flare seat.



Specification

- Length: 5 feet / 60 Inch/152.5 cm

- Apply to: propane burners, stove, turkey fryers, heaters, smokers and other propane appliances. Not suitable for appliances which need low pressure regulator.

- Inlet Pressure: 25-250PSIG

- Outlet Pressure: 0-20PSIG

- Max.flow capacity:136000BTU

- End Connector: 3/8" flare swivel nut; Hose connection: 5/8"-18UNF



* The DozyAnt high pressure propane regulator with hose is designed to be used with high pressure propane burners.

* There are two connections - One side works on a standard size propane tank cylinder fitting. The other side is installed on the burners

* This propane hose with regulator has excess flow protection and will automatically shut off. Protect you from danger!



Note:

1. No matter where you will use this hose, Please confirm that your propane appliance has a female 3/8 inch flare connector or find some propane adapters and fittings to match your propane appliances and this hose so that you can use it, and avoid wasting your money and time!

2. In order to use this product more safely, please adjust the regulator to 0 PSI (Off the regulator) firstly before you use.

• Fits QCC1/Type1 LP gas propane tanks and cylinders and 3/8-inch female flare connection. come with pipe fitting 3/8" flare M x 1/8" MNPT. Great for BBQ, camping, tailgate party, heating needs or having a patio/camping outdoor cookout.
• Adjustable 0-20 PSI high pressure output propane regulator with 5 feet hose is a must have item for your propane burners, stove, turkey fryers, heaters, smokers. Not suitable for appliances which need low pressure regulator.
• High quality this product itself with safety certification and excellent sealing quality is promised for your safety. This propane regulator with hose has excess flow protection for your safety and will automatically shut off.
• 100% solid brass corrosion resistant construction fitting, and provides secure, airtight connection between propane tanks cylinders and propane gas appliances.
• No tools needed, easy and quick attachment for easier installation.

User questions & answers

Question:	What would be an example of an item that requires a low pressure regulator
Answer:	I used this regulator on a smoker.

Product description

This 21-inch regulator kit with hose and regulator fits the Genesis Silver C and Genesis Gold, Genesis Platinum B, Platinum C and Summit Silver and Gold gas grills. Rubber construction.

• Hose and regulator replacement kit for Weber propane grills
• Provides secure, airtight connection between grill and tank
• Fits Weber models Genesis Silver C, Genesis Gold, Genesis Platinum B and C, and Summit Silver and Gold
• Includes 21-inch QCC1 hose, regulator, and instruction sheet
• Genuine Weber replacement part

User questions & answers

Question:	Will this fit the genesis E 310 series
Answer:	Hello, no, this hose/regulator is not appropriate for a Genesis E-310. You'll want hose/regulator # 7627, which can be found at the url below. Thanks. https://www.amazon.com/Weber-30-Hose-Regulator-Kit/dp/B00FLRBXEO?keywords=weber+7627&qid=1540830979&sr=8-1&ref=sr_1_1
Question:	Is this for a Genesis 2 grill
Answer:	Hello, no, this hose/regulator is not designed for Genesis 2 (made between 1985 and 1992) or Genesis II (made between 2017 and the present). If you have a Genesis 2, you'll want hose/regulator # 65570, and if you have a Genesis II, you'll want hose/regulator # 67069. Thanks!
Question:	Will this fit a Q3200 Weber grill
Answer:	Hello, no, this hose/regulator is not considered appropriate for the Q 3200. The hose/regulator for the Q 3200 only comes as a pre-assembled component of the full manifold (valve) assembly, and can only be ordered though our call center at 1-800-446-1071. Thanks!
Question:	What is the pressure supplied to the burners
Answer:	Hello! This hose/regulator is rated for 11" of water column pressure. Thanks!

Product features

Hose and Regulator Kit

Built for Summit Silver/Gold/Platinum and Genesis Silver C, Gold B/C, and Platinum B/C.

Fits: Genesis Silver C, Genesis Gold B/C, Genesis Platinum B/C and Summit Silver/Gold/Platinum.

Product description

You can control the temperature of your appliance exactly what you want

✅The propane has a Gauge that will tell youhow much pressure you are turning the knot to release gas, Let you adjust yourfire better.

✅If the stove/Grill/Buner/Smoker and moreactually needs more or less pressure, you can adjust it with this instead ofjust being screwed by having the default regulator pressure.

✅Equipped with Excess Flow Protection. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. It will shutoff the gas flow automatically. The regulator can still work when those problems improved.

Specification

- Length: 12feet / 144 Inch/366 cm

style="margin-left: 5.25pt;"

- Apply to: propane burners, stove, gas grill, turkey fryers, heaters, forge, smokers and other propane appliances. Not suitable for applianceswhich need low pressure regulator.

- Inlet Pressure: 25-250PSIG

- Outlet Pressure: 0-30PSIG

- Max.flow capacity:136000BTU

- End Connector: 3/8" flare swivelnut; Hose connection: 5/8"-18UNF

Warm Tips   

1.FULLY TIGHTENED at both propane tank side and grill side before using on your propane appliances to prevent leakage.

2.In order to use this product more safely, please adjust the regulator to 0 PSI (Off the regulator) firstly before youuse.

3.Keeping the hose away from HIGH TEMPERATURE, OPEN FIRE. ALL propane appliances are OUTDOOR Use.

After sale guarantee

You are not satisfied, don't be too quick to leave a negative comment, you can request a replacement or a full refund. Contact us! We will show you a satisfactory solution.

• 【Measure Your Pressure】Use the pressure gauge to determine and regulate your propane PSI. Measuring from 0-60 psi (as well as 1-4 100xKPA), the Pressure Gauge lets users control their heat with a precise level of accuracy.
• 【End Fitting to Appliance】12Foot 0-30 PSI High pressure stainless steel hose, 3/8” female flare fitting,fit for gas grills, gas stoves, turkey fryers, burners, smokers, cooker, fire pit and heater, hot water heater, as long as your appliance connection is 3/8’’ male flare connector.
• 【New upgrade】Black part fitting is POL connector, you can directly connect your 40 Pound propane tank to 100 Pound, Don't need to move your atmospheric bottle. Gas Pressure Gauge allow you control of the heat output with a precise level, to keep your outdoor cooker in optimal operating condition.
• 【Durable Material Design】The propane hose body is made of stainless steel it can effectively reduce damage caused by friction and animal bites. Defeat ordinary rubber that ages in the sun, provides secure, airtight connection between grill and turkey fryer or burner and tank.
• 【SAFETY】Pass CSA certificate for your safety, excellent sealing quality is promised for your safety. propane regulator and hose has excess flow protection and will automatically shut off, easy to install your propane bottle and propane appliance.

User questions & answers

Question:	The pressure gauge doesn't seem to work. I've been sent a replacment but the gauge doesn't register when used. Any suggestions
Answer:	You can provide your full address to me, and I will re-ship a brand new set for you
Question:	Is the 3/8” female fitting npt or sae
Answer:	Not sure - it fits into a standard 20 gallon propane tank if that helps. One note, the gauge on the one I got didn't work. The seller replaced it but that gauge didn't work either. I like the hose, I just can't regulate the pressure as much as I'd like.
Question:	What pressure is hose rated for? Is it marked anywhere
Answer:	Not sure on that. No markings that I've seen. I haven't needed more that 30psi, so I know that's ok.
Question:	Will this work for a 100# propane tank to a mr heater 50000 btu heater
Answer:	Yes if you use the regulator to keep the pressure down

Product description

GASPRO 6ft Low Pressure Propane Regulator with Stainless Steel Braided Hose provides great and stable gas flow for grill, stove etc. Sturdy and easy to install, the propane line makes your cooking safer and easier. A great partner for outdoor kitchen.

 

Product Features：

--Fit for any propane appliances with 3/8” male flare fittings. Great for BBQ, camping and outdoor gathering.

--Easy to use and install. Simply screw the black plastic end to your propane tank and the brass fitting to the gas devices.

--CSA Certification is provided for your safety.

 

• Fitting Type: QCC1/Type1 & 3/8” Female Flare
• Material: Stainless Steel
• Length: 6 feet/72 inch
• Outlet Pressure:11” W.C.
• Flow Capacity: 80000 BTU/Hr

• 【Works Perfectly】The propane tank regulator works well in providing great and stable air flow for your propane appliances. A must-have accessory for a chef!
• 【Well-built】Stainless steel braided LP gas line effectively withstands weather, scratches and corrosion. Animals cannot chew through it anymore
• 【Suitable Length】6 feet in total, the propane hose with regulator is more flexible, provides extra distance for cooking and makes propane placement easier
• 【Excellent Fit】Standard 3/8" female flare fittings on the end, perfect for gas grill/stove,fire pit, Camp Chef Explorer Burner Stove, 36" Blackstone Griddle, propane smoker, lp generator, hot water heater, gas heater and so on
• 【Safety Certified】The propane regulator with hose is CSA certified to ensure higher safety. No leaks, no issues

Product description

GASPRO  5ft Propane Regulator Hose with Gauge 

This long-lasting braid hose and solid brass can provide an airtight connection between grills. Come with the propane tank gauge, you don't have to buy an extra gas meter, saving your cost. 

 Specification:

-Outlet Pressure: 11" W.C.

-Flow Capacity: 80000 BTU/Hour

-Certificate: CSA

-Hose Length: 5feet/60 inches

Features:

1.LP propane hose with regulator, it connects an appliance to 5-40lb LP tank

2.No tools are required and easily install with a handheld grip for tightening. 

3.Great for BBQ, camping, tailgating, heating needs, or having an outdoor cookout.

Notice:

- Before order, please check whether the propane tank has the standard propane valve fitting QCC1/Type1, like a Propane Smoker, Gas Grill, Heater, Fire Pit, and Generator. And the check the device if the other end is a 3/8inch Male Flare Fitting.

• Upgraded Hose- Durable stainless steel braided is added around the hose to effectively reduce friction and damage caused by animals. It is a perfect upgrade from an ordinary rubber hose
• Saving Cost- The propane hose is equipped with a tank gauge level indicator that can detect leaks and allow you to read fuel level at glance. Without buying an additional gas meter, saving your money
• Versatility-Come with 3/8 " female flare fitting, perfect fit for the gas grill, stove, fire pit, Camp Chef Explorer Burner Stove, Griddle, LP generator, hot water heater, gas heater, and more
• Universal- With standard QCC-1 tank connection and 3/8" female flare connector, it is compatible with 5-40lb LP gas tank
• Safety- CSA certified, our propane hose with the regulator has excess flow protection and will automatically shut off. Ensure your safety