9 best regulator nuts

• Converts Type 1 Connection x 1/4 Inch Male Pipe Thread to QCC1/Type1
• Excess flow protection-Safety plastic cap pops off if damaged stopping flow of propane
• High quality solid brass construction makes it corrosion resistant
• Connect a 20lb-30lb propane tank to your regulator/hose assembly
• Easy to connect attachment, no tools required

User questions & answers

Question:	Can this adapter be used to go from a 20 lb tank to a grill that utilizes 1 lb cylinders
Answer:	no
Question:	How about the quality of this propane adapter
Answer:	Good quality. Well molded and machined.
Question:	Does this flow up to 200,000 BTU
Answer:	I am almost positive it does. However, if you need 200,000 btu flow for sure buy the Camco green #59923 it is rated the btu's you need and it's cheaper.
Question:	Does this part function as a high-to-low pressure adapter? Can you use low pressure appliances by attaching a low pressure fitting to it
Answer:	I use it to connect the propane tank (high pressure) to a low pressure regulator. The low pressure regulator reduces the pressure to that required by the intended application. You can connect the low pressure regulator to the low pressure appliances by means of appropriate fittings, hoses, etc.

Product features

QCC1 Propane Adapter Gas Regulator Valve Fitting

• Connect a 20 pound or 30 pound propane tank to the regulator/hose assembly
• Appliances up to 70,000 BTU
• Installation can be completed without tool twisting QCC1 end

Product description

Chrome-plated brass body with all brass high-pressure chamber. 2000 SCFH air maximum rated flow at 2000 psi. Internal reseating relief valve protects against over pressurization. Dual scale pressure gauge: psi and kPa. DISS gas specific outlets.

• Chrome-plated brass body with all brass high-pressure chamber
• 2000 SCFH air maximum rated flow water 2000 psi
• Internal reseating relief valve protects against over pressurization
• Dual scale pressure gauge: psi and kpa
• Gas specific outlets

User questions & answers

Question:	Hi, i need a high flow regulator that can obtain a 55 psi. is it possible with this one
Answer:	Directions included in the package say machine washable and air dry.

• Up to 80,000 btu capacity.
• ACME nut x 1/4" male NPT.
• Convert old p.o.l. connections to new style acme, qcc-1 fittings.
• Safety plastic cap pops off if damaged stopping flow of propane.
• No others tools required and easy to install with handheel grip for tightening.

User questions & answers

Question:	is there a special socket required to install this
Answer:	Yesl I love this product and use it for bags, placemats, tablerunners, etc. Easy to work with. Enjoy!

Product features

Joywayus QCC1 1/4 Acme Nut Propane Adapter with 1/4" NPT Male

• Please ensure the connector type of your propane tank or cylinder before you purchase our propane adapter.

• It fits for propane appliances, heater, BBQ grill, camper, cylinder. Multiple uses for hunting, fishing, camping, sports and outdoors. So grilling and frying outdoors is easier.

Features:

• 100% brand new and good quality.
• End fitting- QCC1/Type 1 Connection and 1/4'' male pipe thread.
• Connect a 20lb-40lb propane tank to your regulator / hose assembly with a 1/4" female pipe end.
• High quality 100% solid brass construction makes it corrosion resistant.
• Excess flow protection and thermal shut-off protection.
• Installs quickly and easily - No tools required.
• Material: Solid brass
• Connection: QCC1/Type 1 Connection and 1/4'' male pipe thread

Product description

Stanbroil 6-feet Propane Regulator Hose with Female Quick Connect x QCC1 End provide a quick connect propane connection to hook up a quick-connect grill valve to a 5lb or 20lb propane cylinder. Easy to Install and Use.

• Solid Brass Pre-installed Fittings on 6-feet Regulator Hose
• For use with Low-pressure Appliances, such as Olympian 5500 grill
• Hook a Quick Connect Valve to a 20lb Cylinder
• 1/4" Female Quick Connect x Acme Nut
• Easy to Install and Use

User questions & answers

Question:	Will this replace the 18" hose I currently have for my fire pit? I'm concerned that it's too long
Answer:	Look at the inside brass fitting. You will see the "flats". A standard socket will fit this inside fitting. Use thread sealant approved for propane and do not overtighten.
Question:	Will this work for a 58,000 btu fire pit
Answer:	yes up to 100 psi
Question:	Is there a way to adapt this to a small, disposable canister
Answer:	I don’t know how it would hold up to being washed. You need to make a test one to see if it holds up in washing. I use this fabulous product to stiffen my bags, purses. It is easy to work with! Great product!!
Question:	Will this work with a 10,000 btu dual fuel blue flame heater
Answer:	It is flexible, however may be too thick for a face mask. It has a thin foam between the outer layers that is what makes it suitable for purse/tote construction.

Product description

Description

Solimeta 12 Feet Universal QCC1, 20 PSI Adjustable Propane Regulator with Hose, LP gas Regulator, 3/8" Female Flare Nut.

Replacement for most gas grill.

QCC1 type thread, 3/8" female thread.

Solid brass construction withstands weather, scratching, denting and corroding.

Length of rubber hose is 12 feet.

Easy to install.

• Replacement for most gas grill.
• QCC1 type thread, 3/8" female thread.
• Solid brass construction withstands weather, scratching, denting and corroding.
• ength of rubber hose: 12 feet.
• Easy to install.

User questions & answers

Question:	Will this work with Coleman 2 burner stove
Answer:	6 feet are 18 inchs I do not know
Question:	Does it fits to a portable napoleon for adapter for 20 pound propane
Answer:	it should.
Question:	Do they consider this a high pressure hose that would be used in a fire pit
Answer:	Yes if you get the adapter. DozyAnt Steak Saver Adapter 1 lb to 20 lb Propane Tank Adapter for Disposable Throwaway Cylinder
Question:	Is this a high pressure regulator
Answer:	No. We can recommend our another gas line with fittings can work with a 10,000 btu dual fuel blue flame heater. you can search B01LY9SZ82 in our store.

• Acme nut x 1/4" male NPT
• No other tools required and easy to install. May need a wrench or socket to replace or tighten it to the regulator.
• Converts 1/4'' Male Pipe Thread to QCC1/Type1
• Made of brass. Features long lasting durability. Won't be easily corroded.
• Great for BBQ, camping stoves, propane heater and other propane appliances.

User questions & answers

Question:	Do you attach the valve to the gas hose with ring clamp or some other clamp
Answer:	What would be the temperature? If the temperature is too high, the 5 Feet Propane Adapter Hose can not bear since it is too close.
Question:	what size socket fits this QCC1 nut
Answer:	If the fire pit is connected to propane tank, then this propane regulator with hose can be used.
Question:	Have a hose for propane cylinders and need a coupling for tank to male, does the male end open the valve on the hose
Answer:	Yes, it is 20 psi adjustable high pressure propane regulator with hose.

Product features

Acme nut x 1/4" NPT Male

Converts 1/4'' Male Pipe Thread to QCC1/Type1

Acme nut x 1/4" Hose Barb

Converts 1/4'' ID hose tubing to QCC1/Type1

Acme nut x 5/16" Hose Barb

Converts 5/16'' ID hose tubing to QCC1/Type1

Product description

STYDDI Premium 3 Feet Universal QCC1 Low Pressure LP Propane Regulator - BBQ Grill Replacement hose fits Most Gas Grills, Heaters and Fire Pit Table

1.UNIVERSAL FIT: Fits all type 1/QCC1 propane tanks and cylinders for most bbq gas grills, RV, patio heaters, stoves, fire pit tables and most QCC1/Type 1 applications.

2.FOOT LENGTH: Type 1 / QCC1 tank connections to 3ft hose and 3/8-inch flare fitting.

3.PREMIUM MATERIALS: Heavy duty hose to 100% brass fittings provide secure and safe connection from your propane tank to your appliance.

Product Instructions:

1.Insert the black plastic fitting and rotate clockwise to your QCC1/Type 1 propane tank connection place.

2.Taking the regulator hose end connect to your 3/8" male flare connector propane appliance.

3.Checking this hose both ends must be fully tightened.

Specification:

Inlet：QCC-1 Tank Connection (ACME)

Outlet: 3/8" Female Flare Nut

Flow Capacity: 80000 BTU/Hr

Propane Hose Length: 3ft/36Inch (Length of rubber/braided hose only)

Certificate: CSA

Gas Type: LP/LPG

Material: Rubber / Brass

Attention:

1.Warning!!! For your safety ALL propane appliances like gas grills, heaters and stoves are OUTDOOR Use.

2.FULLY TIGHTENED at both propane tank side and grill side before using on your propane appliances to prevent leakage.

3.To check and make sure the hose is away from the OPEN FIRE before installing to your appliances.

4.Keeping the hose away from HIGH TEMPERATURE.

Note:

Please check to see if the propane tank has the standard propane valve fitting QCC1/Type1, like a Gas Grill, Heater, Fire Pit and Generator. Then see device if the other end is a 3/8inch Male Flare Fitting.

• NO NEED TO BUY EXTRA GAS METER & SAVING YOUR MONEY. This upgraded 3 FT braided low-pressure propane hose and regulator assembly is equipped with tank gauge level indicator, allows you to monitor the fuel level without necessarily removing the tank. The color-coded dial lets you see when your propane gas level is low at a glance without spending more money on extra gas meter.
• CSA CERTIFICATED & BUILT-IN EXCESS FLOW PROTECTION FOR YOUR SAFETY. CSA certificated ensures secure, airtight connection between grill and tank. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. flow capacity too much, it will shut off the gas flow automatically.
• EASILY INSTALL WITHOUT A HITCH! Please DOUBLE CHECK your appliance connection is 3/8" MALE FLARE FITTING CONNECTOR. Insert the black plastic fitting and rotate clockwise to your QCC1/Type 1 propane tank connection place. Then connect the regulator hose end connect to your 3/8" male flare connector propane appliance. It’s compatible with your 20-50 lb propane gas tank.
• UNIVERSAL FOR MOST LOW-PRESSURE GAS PROPANE APPLIANCE. QCC1/QCC/Type 1 hose and regulator replacement for Weber Genesis 300-series, Genesis Silver C, Genesis Gold, Genesis Platinum, Spirit E-210/E-310 etc.and most of Chari-broil gas grill with side burner; Dyna-Glo dgp350snp-d, mfa350bnp/mfa350cnp ge530bsp-d,dge486ssp-d,dge486gsp-d etc. and most of Brinkmann gas gril; Uniflame GBC873W-C,GBC873W,GBC940WIR,GBC940WIR-C,GBC976W,GBC956W1-C,GBC1076WE-C etc. and most of Kenmore gas grills.
• A MUST-HAVE BBQ HEATER REPLACEMENT. No tools required and easy to install with handheld grip for tightening. Great for using gas grill, heater, smoker, camp stove, lantern, tabletop grill, Fire pit Table, Turkey fryer and more propane appliances. Helpful in various occasions such as BBQ, camping, tailgating, heating needs or having an outdoor cookout.

Product features

STYDDI Low Pressure Propane Regulator and Hose

Fits all Type 1/QCC1 propane tanks and cylinders for most bbq gas grills, RV, patio heaters, stoves, fire pit tables.

• Please Note: The outlet thread is 5/8“-18 UNF, not 3/8" thread

STYDDI Gas Grill Regulator and Hose

1. Warning!!! For your safety ALL propane appliances like gas grills, heaters and stoves are OUTDOOR Use.
2. FULLY TIGHTENED at both propane tank side and grill side before using on your propane appliances to prevent leakage.
3. To check and make sure the hose is away from the OPEN FIRE before installing to your appliances.
4. Keeping the hose away from HIGH TEMPERATURE.

Product Instructions:

1. Insert the black plastic fitting and rotate clockwise to your QCC1/Type 1 propane tank connection place.
2. Taking the regulator hose end connect to your 3/8" male flare connector propane appliance.
3. Checking this hose both ends must be fully tightened.

Kindly Reminder:

The guage only works when turn the tanks or cylinders on!!

Type-1 (QCC-1) Tank Connect

Fits all appliances with a Type 1 connection.It’s compatible with your 20-50 lb propane gas tank.

3/8" Female Flare Swivel Nut - The thread is 5/8“-18 UNF Thread

Great for using gas grill, heater, smoker, camp stove, lantern, tabletop grill, Fire pit Table, Turkey fryer and more propane appliances. Helpful in various occasions such as BBQ, camping, tailgating, heating needs or having an outdoor cookout.

(Please Note: The Thread is 5/8“-18 UNF, not 3/8" thread)

With Tank Gauge Level Indicator

Allows you to monitor the fuel level without necessarily removing the tank. It comes with a color coded dial which lets you see when your propane gas level is low at a glance.

Please Note:

Only works when turn propane on.

Product description

NOTE - Tools are required for secure leak free connection to your propane appliance. A TOP QUALITY LOW-PRESSURE HOSE- Maxing out at 80, 000 BTU, this 8 ft low pressure propane regulator is fiber reinforced to ensure quality performance. The hose is the perfect fit for a wide variety of grills, fire pit tables, and other propane appliances.

• ✓ A TOP QUALITY LOW-PRESSURE HOSE- Maxing out at 80, 000 BTU, this 8 ft low pressure propane regulator is fiber reinforced to ensure quality performance. The hose is the perfect fit for a wide variety of grills, fire pit tables, and other propane appliances
• ✓ LONG LASTING AND DURABLE - - The Steel Braided Hose measures 8 ft (96in) long and fits type-1 (QCC-1) tank connections, Long lasting and reliable, Goes for a long time, Heavy-duty and good for use with high-pressure burners
• ✓ READY FOR USE- The Low Pressure Hose is ready to use right out of the box and requires no additional tools to set up. Simply connect the regulator to the tank and appliance when ready to use
• NOTE - Tools are required for secure leak free connection to your propane appliance

User questions & answers

Question:	Is it stainless steel braid
Answer:	This has a male threaded end that usually goes into the regulator . the hose will probably have a male end also. when it goes onto the tank it does open the check valve on the tank.
Question:	will it fit a charbroil grill
Answer:	I think the thread of Coleman 2 burner stove is 7/8-14VNF-LH, our 5 Feet Propane Adapter Hose is with QCC1 thread, it do not fit unless you have an adaptor.

Product description

Must Have Item!!! If You'Re Using Those Small Green Propane Cylinders





1/4" Standard Threads

Converts Type 1 Connection X 1/4 Inch Male Pipe Thread To Qcc1/Type1.



Great Tool For Campers

Great For Adapting Propane Weed Burner, Make Camping Easier.



Propane Bottle Extension

Useful To Convert Bbq And Other Propane Portable To Use The Rv'S Onboard Quick Connect Line.



Wide Application

Works Great For Refilling 1 Lb. Propane Cylinders For Your Portable Grills, Heaters, Torches, Etc.





Using Instruction

1: Put The Empty Little Tanks In The Freezer For More Than 30 Minutes.

2: Attach The Coupler To Your Propane Tank.

3: Attach Your Empty Tank (Fresh From The Freezer) To The Adapter.

4: Pick Up Your Large Tank And Turn It Upside Down And Rest It Securely On The Corner Of Your Table.

5: Open The Propane Valve And Shut It Off When The Flow Of Liquid Propane Stops.

6: Turn Everything Right Side Up And Remove The Little Cylinder.

7: Repeat As Necessary.





Gimiton Direct Are Mainly Engaged In Garden Watering Tools And Nail Tools, Our Mission Is To Provide Customers With Featured Products In Top Quality And Competitive Price.

All Gimiton Products Are Backed By A 12 Month Worry-Free Warranty. We Provides Hassle-Free Service. 100% Satisfaction Guaranteed.



Note: Not For Use In Potable Drinking Water Applications.

• 【Solid Brass Construction】 Made From Heavy Brass Material, Long Lasting Durability, Provide Safe Connections And Leakage-Free Operation.
• 【1/4" Male Pipe Thread】 1/4-Inch Male Pipe Thread, Standard Threads, The Threads Are Perfect Per Npt, The Same Size As A Refillable Propane Tank.
• 【Excess Flow Protection】 Safety Plastic Cap Pops Off If Damaged Stopping Flow Of Propane, Easy To Connect Attachment, No Tools Required.
• 【Package Includes】 1X Propane Adapter, 1X Gas Fitting Adapter, Percect For Hooking Your Small Propane Bottles Up To The Larger One.
• 【Warranty】 We Provide A 30-Day Refund Service And 12-Month Hassle-Free Warranty, If There'S Any Problem With Our Product, Please Contact Us. You Can Get A Replacement Or A Full Refund Immediately.

User questions & answers

Question:	I have a tankless water heater with a 1/2" npt male thread. will this work as an adapter to the propane hose nurled 1/4" end
Answer:	I believe it will. Majority of propane tanks have standard fittings and the line-in to the burner is also a standard fitting.
Question:	Is this adapter threaded for the old pol inside the qcc1 end
Answer:	Sure, it's hooked up to a hose barb at one end.
Question:	How can I fill my 20 gal lp tank from a 5gal tank
Answer:	It is a specialty socket. Probably available at an auto parts store. Might have to take it to a propane dealership for installation.