12 best solar micro inverter

Product description

The versatile Enphase M250 Microinverter performs in both residential and commercial solar PV installations and is compatible with both 60-cell and 72-cell modules. With its all-AC approach and integrated grounding, the M250 delivers increased energy harvest and reduces design and installation complexity.

The Enphase M250 Microinverter integrates seamlessly with the Enphase Engage Cable, the Enphase Envoy communications gateway, and Enphase Enlighten monitoring and analysis software.

Up to 24 units per branch (3-ph) or 16 units (single-phase). Integrated Ground: no GEC needed for microinverter. NEMA 6 enclosure, 25 year warranty.

• The versatile Enphase M250 Microinverter Enphase M250-72-2LL-S22-US performs in both residential and commercial solar PV installations
• Compatible with both 60-cell and 72-cell modules
• With its all-AC approach and integrated grounding, the M250 delivers increased energy harvest and reduces design and installation complexity
• The Enphase M250 Microinverter integrates seamlessly with the Enphase Engage Cable, the Enphase Envoy communications gateway, and Enphase Enlighten monitoring and analysis software
• 25 year warranty

Product description

Description

This is a 1200W solar grid-connected inverter, inverter DC to AC 110V micro-inverter. IP65 waterproof rating, high performance MPPT function, reverse efficient power transmission technology and intelligent monitoring system, the inverter is safe, intelligent and easy to use.

Features

Waterproof - Waterproof rating IP65 to prevent rain from eroding the surface. Parallel connections minimize safety hazards and are safe enough.

MPPT Features - High performance and powerful MPPT (Maximum Power Point Tracking) algorithm to optimize solar panel power harvesting. Effectively capture and collect sunlight.

Inverter power transmission - uses reverse efficient power transmission technology. Additional power is transferred to the grid. Effective use of the electrical energy generated by the inverter.

Product Specifications

Product: Waterproof Solar Grid-Connected Inverter

Recommended input power: 1200W

Recommended PV modules: 4 * 300W / Vmp> 34V / Voc <50V

Maximum input DC voltage: 50V

Peak power tracking voltage: 25-40V

Working voltage range: 17-50V

Min/Max Startup Voltage: 22-50V

Maximum DC short-circuit current: 80A

Output power: 120V AC

Peak power output: 1200W

Rated output power: 1150W

Rated output current: 9.58A

Rated voltage range: 80-160V AC

Rated frequency range: 57-62.5 Hz

Maximum unit of each branch circuit: 3PCS (single phase) static

MPPT efficiency: 99.5%

Maximum output efficiency: 92%

Night power consumption: <50mW

Maximum package size: 47x34x12 cm (18.5x13.4x4.7 inches)

Gross weight: 3.93 kg (8.66 lbs)

Package Content

1 x 1200W grid-connected inverter

1 power converter

1 x 1.5 m power cord

1 set of mounting accessories

1 x Product Manual

• 【Waterproof】- IP65 waterproof class, effectively prevent rainwater from eroding the surface. Connected in parallel, minimizing safety hazards. High quality and safe enough.
• 【MPPT Function】- High performance powerful MPPT (maximum power point tracking) algorithm, optimize the power from the solar panels to collect. Capture and collect sunlight effectively.
• 【Reverse Power Transmission】- Adopts reverse efficient power transmission technology. Extra electricity is transmitted to the grid. Efficient use of the inverter to the power emitted.
• 【Intelligent Monitoring】- The inverter can collect real-time data with intelligent monitoring system, can be controlled start-up / shutdown / power regulation.
• 【User Serviceable】- Parallel installation, the micro inverter can be installed directly at a later stage without changing the previous configuration. It is simple whether installation or maintenance.

User questions & answers

Question:	Has anyone had problems from heat making them cut off to cool
Answer:	check output ...voltage...on the panels and stay within voltage limits on inverter...if panel is 12 volts, then times 3 is 36, which should be right input for this inverter ,,,,,but .the panel voltage always seems higher than panel posted voltage ...to my experience , because of ...no load? I have had several inverters fail ….due to maybe to close wattage limit, so probably keep wattage to half of limit on inverter...wish I had known
Question:	Do I need modem to setup or initialize the inverter
Answer:	it approved by CE FCC ROHS
Question:	Is it UL certified
Answer:	the warranty is 1 year. we design and test it according to ul1741 or ieee 1547 standard. but not apply such certificate.
Question:	Can i just use 2 300w panel and not
Answer:	to 1000W, you can connect with solar panel from 0-1200W, but the input voltage should be in the scope (20-50VDC). We recommend you to sue 4 PCS*250W(Vmp=30 or 36V） solar panel. regards, kenny

Product features

High Automation

The robust MPPT algorithm can automatically track the power points and increase the power generation by 25%. With a real-time monitoring system, it can help you monitor power generation efficiency and reduce workforce expenses.

Efficient Transmission

Efficient reverse power transmission technology. Power transmission rate up to 99.9%. All digital control and intelligent soft switch technology are adopted in the charging module.

Digital Control

The digital SPWM control technology is characterized by strong anti-interference ability, fast calculation speed, high intelligent degree, high control precision, and excellent output waveform.

IP65 & Aluminum Material

Introducing IP65 waterproof appearance design and aluminum alloy material, it is safe and reliable. Multiple protection functions are provided to prolong service life.

Easy To Use

Lightweight and easy to install, many inverters can be stacked arbitrarily to form a single-phase parallel stacking system. It is simple, whether installation or maintenance.

Wide Usage

It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances.

110V Solar Grid Tie Micro Inverter

Efficiently turns sunlight into clean and green power. Our solar grid tie micro inverter employs MPPT technology, reverse power transmission, and digital control. It is designed to provide sufficient power to drive various household appliances. Moreover, it has a prolonged service life given its IP65 waterproof design and aluminum alloy structure.

• 【Waterproof】- IP65 waterproof class, effectively prevent rainwater from eroding the surface. Connected in parallel, minimizing safety hazards. High quality and safe enough
• 【MPPT Function】- High performance powerful MPPT (maximum power point tracking) algorithm, optimize the power from the solar panels to collect. Capture and collect sunlight effectively.
• 【Reverse Power Transmission】- Adopts reverse efficient power transmission technology. Extra electricity is transmitted to the grid. Efficient use of the inverter to the power emitted.
• 【Intelligent Monitoring】- The inverter can collect real-time data with intelligent monitoring system, can be controlled start-up / shutdown / power regulation
• 【User Serviceable】- Parallel installation, the micro inverter can be installed directly at a later stage without changing the previous configuration. It is simple whether installation or maintenance

User questions & answers

Question:	Does it have a warranty
Answer:	You have to look at your place of purchase. It can have 90 days, 6 months, 1 year, 25 year you have to request from place of purchase.
Question:	Can I connect to a 24v or 36v battery bank at night? Thank you
Answer:	These output only AC voltage.
Question:	can i use as stand alone unit without any communication hooked up
Answer:	Yes but you won't be able to monitor the output. I use a Kill-a-Watt to monitor mine.
Question:	Is it UL approved
Answer:	I do not believe so.

Product features

High Automation

The robust MPPT algorithm can automatically track the power points and increase the power generation by 25%. With a real-time monitoring system, it can help you monitor power generation efficiency and reduce workforce expenses.

Efficient Transmission

Efficient reverse power transmission technology. Power transmission rate up to 99.9%. All digital control and intelligent soft switch technology are adopted in the charging module.

Digital Control

The digital SPWM control technology is characterized by strong anti-interference ability, fast calculation speed, high intelligent degree, high control precision, and excellent output waveform.

IP65 & Aluminum Material

Introducing IP65 waterproof appearance design and aluminum alloy material, it is safe and reliable. Multiple protection functions are provided to prolong service life.

Easy To Use

Lightweight and easy to install, many inverters can be stacked arbitrarily to form a single-phase parallel stacking system. It is simple, whether installation or maintenance.

Wide Usage

It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances.

Solar Grid Tie Micro Inverter 110V

Efficiently turns sunlight into clean and green power. Our solar grid tie micro inverter employs MPPT technology, reverse power transmission, and digital control. It is designed to provide sufficient power to drive various household appliances. Moreover, it has a prolonged service life given its IP65 waterproof design and aluminum alloy structure.

Product description

1. Three input voltage range, suitable for different solar panels.

1). 18V or 36 cells solar panels, Vmp is 18-21V and Voc is 20-24V.

2). 24V or 60 cells solar panels, Vmp is 26-30V and Voc is 34-38V.

3). 36V or 72 cells solar panels, Vmp is 35-39V and Voc is 42-46V.

2. Support for small power wind turbine using grid power.

3. Creative MPPT tech makes efficiency higher than 99%. Reaction more sensitive and MPPT locking faster.

4. Adopting high-frequency isolation transformer, high efficiency, and high security.

5. Creative circuit design and imported industrial electronic components make application efficiency higher and performance more stable.

6. Parallel modular components design (stacking use) is convenient for systems setting, flexible combination and system scalability.

• Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance.
• Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable.
• Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system.
• Adopting high-frequency isolation transformer type, high efficiency, and high security.
• Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion.

User questions & answers

Question:	My inverter is in a constant state of error??? i have 3, 100 watt panels wired in series for 36v and my voltage on the dc terminals is 51.2 vdc
Answer:	yes, you can cap the load terminals if there is no appliance connect to the load terminals.
Question:	Is this 1741 certified
Answer:	Yes the solar panel can be connected to the battery after the charge controller I don't know what tide pod eating millennial told you no but he is wrong I've been using the panels for an off-grid camp charging my battery Bank when I'm not there it's a little small but I'm not there for days at a time so but a time I come back I have a full battery Bank
Question:	What is the warranty? is is ul1741 or ieee 1547 compliant
Answer:	Not in the way the brakets I got with mine- unless I drilled more more holes in the area where the other angle adjustment holes are. Not a big deal, because if you mount it on something mobile like that, I would highly recommend to drill more holes into the mounting area of the brackets anyway.
Question:	hello friend how are you working and how many panels do you have connected thanks
Answer:	Not sure I made one that lets me lay it down

Product description

Description



SMA’s Sunny Boy micro inverter system enhances design flexibility for installers in the U.S. and across the globe. It features industry-leading 96% CEC efficiency, simple installation, an innovative communications platform and is especially applicable for residential systems and rooftops with complex, shaded situations



Features:

Mulitgate technology allows for reduced component count

Private band powerline for highly reliable communications

Overvoltage protection enhances durability

Ideal for complex roofs

Pre-assembled AC plugs and connection cables

Multiple DC connector options and daisy chain configuration

The Sunny Multigate is a reliable, distortion-free solution

Module-level, customized reporting through Sunny Portal

Remote monitoring via the Internet or iPhone and Android apps

30 year history and strong financials create stability and ensure full warranty support

German engineered, assembled in the USA for unmatched quality



Brand: SMA Solar

Part Number: SB240-US-99-10

MPN: SB240-US-10

Model: SB240-US-10

Type: Micro Inverter

Operating Temperature Range: -40° C - 65° C

Enclosure: NEMA 3R

Cooling: Convection



Input (DC):

Recommended PV Power (STC): 250 W

Max Voltage: 45 V

Peak Power Tracking Voltage: 23 V - 32 V

Min Start Voltage: 23 V

Max Current: 8.5 A



Output (AC):

Maximum Output Power: 240 W

Nominal AC Voltage: 120 V

Voltage Range: 211 V - 264 V

Frequency: 60 Hz

Max Current: 1 A



Condition: New



This item will be Shipped exactly as shown in the picture

• **Guaranteed SMA Solar Genuine**
• Part Number: SB240-US-99-10
• Model: SB240-US-10
• Type: Micro Inverter
• **Ship within 24 hours except for holidays and weekends**

User questions & answers

Question:	Can this micro inverter work standalone without an SMA multigate
Answer:	Do you use solar panels or battery connections? Please check the DC input. Please give Y & H merchants a message and we will provide you with technical support online!
Question:	Are these also know as optinizer for Solor panels
Answer:	Thank you for asking Inverter Grid Tie. Does not have a UL-1741 certification. We are only referring to this standard design.
Question:	Does this come with MC4 connectors and 240V pigtail
Answer:	Does not have UL 1741 certification.
Question:	Do you have 100 units available
Answer:	Can handle 600W. Can not be used in the rain. All our inverters cannot be used in the rain! Solar Panel Voc 37V: You need to buy the DC22-60V version, we have a reply to you on your other question! Connect in parallel!

Product description

Specification:

Item Type: Solar Inverter

Product Series: SG Series

Model: SG350MS

Input Data (DC, PV)

Number of Input MC4 Connectors: 1 Set

MPPT Voltage Range: 24V-40V

Working Voltage Range: 18V-50V

Maximum Input Voltage: 50V

Starting Voltage: 18V

Maximum Input Power: 350W

Maximum Input Current: 12A

Output Data (AC)

Single-Phase Power Grid Type(optional): 120V/230V

Rated Output Power: 330W

Maximum Output Power: 350W

Nominal Output Current: at 120VAC: 2.5A / at 230VAC: 1.3A

Nominal Output Voltage: 120VAC / 230VAC

Default Output Voltage Range: at 120VAC: 80V-160V / at 230VAC: 180V-280V

Nominal Output Frequency: 50Hz / 60Hz

Default Output Frequency Range: at 50Hz: 47.5Hz-52.5Hz / at 60Hz: 57.5Hz-62.5Hz

Power Factor: > 0.99

Total Harmonic Distortion: THD <5%

Maximum Units Per Branch: at 120VAC: 8 Units / at 230VAC: 16 units

Peak Efficiency: 95%

CEC Weighted Efficiency: at 120VAC: 92.5% / at 230VAC: 93.5%

MPPT Nominal Efficiency: 99.9%

Night Power Consumption: <700mw

Working Environment Temperature Range: -40℃ ~ + 65℃

Storage Temperature Range: -40℃-+ 85℃

AC Bus Cable Maximum Current: 20A

Waterproof Rating: IP65

Communication Method: 2.4G

Output Connector (length cm, Left Male M, Right Female F): M15 + F85

Cooling Method: Natural convection, no fan



Package List:

1 x Solar Inverter

1 x Receiver

1 Bag Screw

1 x User Manual

• ▶ Provide Intuitive Data -- The LED display can provide clear and intuitive data. Package List:1 x Solar Inverter;1 x Receiver;1 Bag Screw;1 x User Manual
• ▶ 95% High Efficiency -- The waterproof rating is IP65, the product will not be easily damaged, High peak efficiency, the efficiency is 95%
• ▶ Natural Cooling Method -- The cooling method adopts natural convection and no fan to ensure that the product will not overheat during operation
• ▶ Withstand Harsh Weather -- It is designed to withstand harsh weather conditions with its weatherproof cabling and silicone potted enclosure
• ▶ Complete Accessories -- Waterproof Rating is IP65, Excellent performance and complete accessories, easy to install and remove

Product description

The Siemens Microinverter System improves energy harvest, increases reliability, and dramatically simplifies design, installation and management of solar power systems.The Siemens system includes the Microinverter, Trunk-andDrop cables, the Envoy Communications Gateway, and the Enlighten monitoring and analysis website.The all new Siemens 215 watt Microinverter with integrated ground technology features a DC circuit isolated and insulated from ground, eliminating the need for a Ground Electrode Conductor (GEC). With this new technology, the installation is greatly simplified, safety is enhanced even further, and an additional saving on labor and material costs can be harvested.

• Compatible with all Enphase M-series microinverter cables and accessories
• New, quality-made product with industry leading 25 year warranty
• Compatible with 60-cell panels up to 215-Watts
• Maximum energy production due to energy conversion for each microinverter
• Quick and simple installation with integrated ground and No GEC needed

User questions & answers

Question:	Work at 120 volt
Answer:	DC 10.8-30Vb version can be used for Voc 20V-24V. So your panel voltage is in line. But the power is too low to start the inverter. The minimum power is 200W. Up to 1100W
Question:	I need 24 siemens m215 micro-inverter m215-60-2ll-s22-ig microinverter, 7.5 x 7.5 x 3, when will you have them available
Answer:	Hi, maximum 1200W input, you can use 12PCS 100W solar panel in parallel. Recommended 18V Solar Panel, Vmp: 18-21V, Voc: 20-24V
Question:	Do you have the cable connectors for M215 Siemens microinverter
Answer:	wonderful day. Let's help you solve this problem. 1: Only 75-85% conversion of panel and inverter normally (many factors, such as panel aging) 2: You need to test 800W solar panels. The actual number of watts output. 3: Because 800W output is the effect of the laboratory. Usually in our environment. The sun can not be 90 ° above the panel. 4: Inverter output power. Requires panel input. If the panel is actually only 300W-400W input. That inverter can not output 800W.
Question:	Are these inverters actually made by Siemens or are they made by Enphase and rebadged
Answer:	This is another old question and answer presented here for more than one product making the answer inaccurate. Look at the DC output voltage on the solar panel you have. One 100 watt solar panel will be about 21.6 volt open circuit (Voc) and about 17.9 volts optimum operating voltage (Vmp). Now the grid tie inverters will show you a DC input range. One will be about DC10.8-30V and the other will be about DC20-45V. To answer the question if you buy the grid tie inverter with the input range of 10.8 to 30 volts you can use one 100 watt solar panel (VOC of 21.6 solar must be in the input range of the inverter). One 100 watt solar panel is the minimum panels. This is extra information to help you understand. Wiring two 100 watt solar panels in series doubles the VOC and VMP output. If the 100 watt solar panels are wired in series you can see that doubling the VOC (43.2 vdc) and VMP (35.8 vdc) will require the other grid tie inverter that has an input range of DC 20 to 45 volts. I hope this helps to understand it better.

• Grid Tie Inverter - DC22V-60V is suitable for 36V solar panel (Vmp30-36V; Voc38-46V) Vmp = working voltage; Voc = open circuit voltage.
• Grid Tie Solar Inverter - The starting voltage of the inverter is 30V. Therefore, the DC22V input cannot be used.
• Micro inverter - 60V is just an instant voltage. As a buffer protection, it cannot be used as a working voltage input. Otherwise it will damage the inverter.
• Solar Inverter grid-tie - High performance Maximum Power Point Tracking(MPPT),Pure sine wave output.If the DC connection is loose and causes a short circuit, then smoke may be emitted.The inverter adopts aluminum alloy casing, so there is no fire.
• On Grid Inverter - Small Size with high efficiency,Easy installation,Stackable.

User questions & answers

Question:	I can use this grid tie for battery source
Answer:	Thank you for asking Grid Tie.DC22-60V version: you can use 36V battery as DC input.
Question:	How do we return item under warranty? The unit I purchased worked a few months and stopped working today. No fuses are blown
Answer:	You should contact the merchant. The merchant will first provide you with technical support to identify the problem and avoid damage again. After identifying the specific problem, we will provide you with a warranty plan.
Question:	Bougerv 170 watts solar panel, 12 volts
Answer:	Yes, you can use it! Compatible with 12V solar panel (working voltage Vmp18-21V; Voc20-24V)
Question:	What outlet does this ship with? Can I plug my laptop charger into it
Answer:	Hi, 1: This is not an OFF Grid, AC output can not be directly connected to the load. 2: This is Grid Tie, AC must be connected to the local power grid (for example: home outlet) 3: After starting the inverter, the load will give priority to the power generated by the inverter. 4: The AC output from Smart Microinverter is synchronized and in-phase with the utility grid.

Product features

How to DIY Grid Tie Inverter Solar System?

DC22-60V version.

1: Please check the power of your solar panel, the power cannot be lower than 120W

2: Please check your solar panel voltage, open circuit voltage 34-46V (Voc)

3: Note: Please use solar panels with the same specifications

DC Input

Easy to install, DC connect your solar panel (red terminals connect "+", black terminals connect "-")

Note 1: Do not connect the positive and negative poles. The LED will not light up.

Note 2: Please tighten the DC end of the inverter. Avoid loosening and short circuits.

AC output

The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet.The switch of the home outlet must be turned on.

Note 1: The local power grid must be normal. In case of power failure, the inverter will automatically stop working (island protection)

Note 2: The household outlet switch must be turned on. Otherwise, the inverter cannot be synchronized to the grid.

Stackable Connection:

The purpose is let small power inverter become high-power inverter.

In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid tie inverter 600W of stack used is equal to 2400W, and the number of open stacks (No Quantitative Restrictions).

MPPT technology

Creative MPPT tech makes efficiency higher than 99%. Peak conversion 80%. Consider the conversion rate of solar panel is about 75-80%, and the Grid Tie Inverter is about 80-90%, for example, if you need 400W power output from the inverter, you need to connect it to a solar panel that 555W/0.8/0.9 equals about 555W, (555w*0.8*0.9=400W)

Multiple protections

Islanding; Short-circuit; converse connection; Low Voltage; Over Voltage; Over temperature Protection

Fan Cooling

Intelligence Fan-on temperature >45℃ and off < 40℃. High-speed ventilation fans to help keep the inverter running at a low temperature.

Product description

Mars Rock 1400w Grid Tie Micro Solar Inverter, 20-50v Dc To 90-140v Ac MPPT Pure Sine Wave Converter For 1400w To 2000w 36v Solar Power System Island Distinguished Gold Color Design (GTI1400W36V120G)  

Smart grid tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and office equipment and connecting to utility grid. The AC output from Smart micro inverter is synchronized and in-phase with the utility grid. It is a key device of power generation systems such as PV power generation system, wind turbine power generation system.

Advantages

 Allowance 1400W to 2000W big DC power input Specially designed for the current mainstream high-power solar panel.

 Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance.

 Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable.

 Modular design, flexible combination and strong system expand- ability.

 Adopting high-frequency isolation transformer type, high efficiency, and high security.

 Perfect electrical protection function.

Parmeter

Max AC output :1400W

Solar panels: ≥1700W

DC MAX input :2000W

Matched solar panel Vmp@36V(72 Cells)

DC input range:20-50V

MPPT Voltage: 24-45VDC

Match AC Grid voltage:120VAC(90-140VAC)

Frequency range50Hz/60Hz

Power Factor>97.5%

Protection: Is-landing; Short-circuit; converse connection; Low Voltage; Over Voltage; Over temperature Protection

Showing: Luminous diode(LED) AC blue lamp, 1 Red and 1 Green Power Transmission; Reverse transfer, load priority

 

• Wide DC input suitable for large power solar panels.72 cells per solar panel, Vmp is 35-39V and Voc is 42-46V.
• Support for small power wind turbine and solar on grid power
• Creative MPPT tech makes efficiency higher than 99%. Reaction more sensitive and MPPT locking faster
• Adopting high-frequency isolation transformer, high efficiency, and high security
• Creative circuit design and imported industrial electronic components make application efficiency higher and performance more stable.6. Parallel modular components design (stacking use) is convenient for systems setting, flexible combination and system stability.

User questions & answers

Question:	should I connect 4 or 6 in series 72cell/270w/24v solar panels per inverter or wyt is best? Thanks, Kenny
Answer:	Should be used with SMA Multigate
Question:	does it have island protection
Answer:	SMA microinverters are individual inverters that convert DC to 240 VAC. These micoinverters can be easily daisy chained together. In order to monitor the microinverters, a SMA Multigate is needed to configure and monitor the status of each device.
Question:	can you connect more than 1 solar panel
Answer:	No, comes without cables
Question:	is it UL Listed
Answer:	Some Sellers may have a higher quantity available than you see on the Buy screen, but you would have to send a message to each Seller to ask. You can also try going to the Other Sellers screen, adding the item to cart and adjusting the quantity once in the cart.

Product description

1.WVC1200W using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Electricity transmission rate of up to 99%.

2.Communication using APP. 

3.We can supply one year warraty.if you have any problem,you can contact us at any time.

Parameter：

Model Number:WVC1200

Maximum input power:1200 Watt

Recommended using solar panels: Power 4*300W,open circuit voltage 36-50VOC

Solar panel open circuit voltage range:36-50VOC

Min/Max start voltage:22-50V

Maximum DC short current:80A

Maximum Input Current:54.4A

Rated output current:9.58A

Rated frequency range: Auto 47-52.5Hz/57-62.5Hz

Maximum units per branch circuit:3PCS (Single-phase)

Output Efficiency:110VAC

Static MPPT efficiency:99.5%

Maximum output efficiency:95%

Night time power consumption:<1W

THD:<5%

Operating temperature range:-40℃ to + 60℃

Waterproof level:IP65

Cooling: Self-cooling

Communication Mode: Wireless APP

Power transmission mode: Reverse transfer, load priority

Monitoring System: Lifetime free

Certificate: CE National patent technology

The package including:

1. one solar inverter

2. one wifi modem

3. some accessories + solar cable

4. One instruction manual

• 1.(-High performance-) Maximum power point tracking (MPPT inverter), electricity transmission rate of up to 99%. Output 110V Pure Sine Wave AC Current. Automatic recognition of 50Hz/60Hz frequencies.
• 2.（-Intelligent manage-)APP monitoring management. User can remotely control the inverter on and off, view the operation and power generation data from inverter. The App software used is compatible with a variety of smart phone or pad.
• 3.(-Power feature-) Micro solar inverter with super maximum power capture algorithm (weak light algorithm); Reverse power transmission; High precision phase detection.
• 4.(-Safety-) The power inverter has IP65 waterproof struct; Anti-thunder, rust-proof property design; Input /output is fully isolated to protect the electrical safety; Over and under voltage protection; Over and under frequency protection; Islanding protection.
• 5.(-Good Heat Dissipation & Easy Install-) Solar Converter Body fully be made of aluminum alloy which can make it has a good heat dissipation performance. And micro converter also makes it easy to install and maintenance in usually.

User questions & answers

Question:	how many panels can I hook up to the inverter
Answer:	The one end (female) is used to add 2nd inverter for expanding the system. Or, it can be capped with amazon item(ASIN#): B07CSMH25P The other end of the inverter plugs into amazon item (ASIN#): B07CSLTHCZ (Power Cable to Connect NEP MicroInverter. 50ft Cord with Plug and Inverter Connector)
Question:	Is it compliant with UL
Answer:	Sure, you can use two 24V panels
Question:	Can i use 100w panels
Answer:	It works ok with 260 watt pvs
Question:	If I install three of the microinverter I just need one with the wifi and the rest just standard
Answer:	They have both 50 and 60 hz capability.

Product features

1200W Micro Solar Inverter

Maximum input power:1200 Watt

Peak power tracking voltage 22-50V

Min/ max starting voltage 22-55V

Waterproof rating IP65

Maximum DC short-circuit:60A

Maximum input operating current 54.5A

Rated output current :10A

Rated voltage range 80-160VAC

Rated frequency range 48-51/58-61Hz

Recommended using solar panels: Power 4*300W,open circuit voltage 36-50VOC

APP Monitoring Function

1.User can download APP Smart Life to monitor and operate Grid Tie Solar Inverter via WIFI in home.

2.The App software is compatible with smart phone or pad, including Android and IOS.

High performance

1. Maximum power point tracking (MPPT inverter) ，Electricity transmission rate of up to 99%.

2. Pure Sine Wave AC Current Output 110V

3. Max 4 pcs 300W 36V Solar Panels can be connected, total 1200W power.

Good Waterproof Performance

The fully waterproof protection which grade reach into IP65 which can prevent rainwater effectively. So Micro solar inverter can work steadily even in humid environment.

Good Heat Dissipation & Easy Installation

1. Solar Converter Body fully be made of aluminum alloy which can make it has a good heat dissipation performance.

2. Micro converter also makes it easy to install and maintenance in usually due to small size.

Power Inverter Feature

1. Maximum power capture algorithm (weak light algorithm);

2. Reverse power transmission;

3. High precision phase detection.

Protection

Intelligent solar inverter has full protection inside to protect inverter and load. Such as Anti-thunder;Over and under voltage protection; Over and under frequency protection; Islanding protection; rust-proof property design.

Connection Diagram

Notes:

*Please connect the inverter following the operation instruction show above. If have any question,please contact with us.

*Non-professionals do not disassemble. Only qualified personnel may repair this product.

*Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials.

*When using this product, avoid children touching playing. Please avoid electric shock.

Product description

1000W Grid tie inverter , Pure Sine Wave Inverter

DC20V-45V to AC90-140V Output.

24V, 30V Solar Panels, Vmp is 26-30V and Voc is 34-38V

36V Solar Panels,Vmp is 35-39V and Voc is 42-46V



Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads.



Grid Tied inverter is a compact unit,which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid.The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid.



Output Power:1000W/110V

Solar Panels:60/72 cells ; 30V/36V

AC Output Voltage: 90V-140V

Frequency Range: 48Hz ~ 62Hz Auto

DC Input: 20V-45V

MPPT range: 26V - 36V.

Certification:CE RoHS



It will perfect compatible with panels at 30V or 36V (Vmp)

It cannot be used with 12v battery.



Link for Y&H Grid Tie Inverter:

https://www.youtube.com/embed/G966CkTR5Ak

• Grid Tie Inverter MPPT range: 26V - 36V【DO NOT use solar controller load ports to connect to the inverter】
• Solar Grid Tie Inverter-Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency
• Grid Tie Solar Inverter-Creative MPPT technology,efficiency more than 99%【Please do not use other voltage input, for example: (20V) or(45V) Please use 200W-1000W solar panel (Voc36-46V)】
• MPPT Micro Inverter-Max Power Point Tracking and Stackable,Island Protection.If the DC connection is loose and causes a short circuit, then smoke may be emitted.The inverter adopts aluminum alloy casing, so there is no fire.
• Grid Tie Micro Inverter-Adopting high-frequency isolation transformer type, high efficiency 【Each time you move the inverter, tighten the DC connection terminals. Avoid short circuit of DC terminal due to loose connection】

User questions & answers

Question:	Can i use this with 2 solar panels (Pmax 20 each)? And will it gove power to the power grid with only 2 panels 20watts each
Answer:	hi dear we recommend to connect 1.2 times solar panel power than inverter' rated power. the input power should be controlled 20-45v Vmp. Voc of solar <50v. so you can take 6pcs of 270w/72cells solar panel connect in parallet. in fact to solar panel only required the voltage should be controlled under safety scope. buyer can decide how many pcs is solar panel according to budget. for to inverter is workable from 0~1400w. regards kenny
Question:	How many 100 W solar panel's do I need to run this system at maximum
Answer:	of course it has such function. this is base protection function. regards kenny
Question:	I have hooked up this inverter to 8 100watt panels. using 8 gage wiring. and at best all im getting out of this inverter is 300 watts. why
Answer:	we recommend 1400*1.2=1700w solar power input. but the DC voltage should be controlled under Vmp<42v. Voc<50v. regards kenny
Question:	I am using 12 voilt 100 watt panels. What is the minimum amount of panels I need to run this unit
Answer:	it meets UP safety testing requirement. regards kenny

Product features

How to DIY Grid Tie Inverter Solar System?

DC20-45V version.

1: Please check the power of your solar panel, the power cannot be lower than 200W

2: Please check your solar panel voltage, open circuit voltage 38-46V (Voc)

3: Note: Please use solar panels with the same specifications

DC Input

Easy to install, DC connect your solar panel (red terminals connect "+", black terminals connect "-")

Note 1: Do not connect the positive and negative poles. The LED will not light up.

Note 2: Please tighten the DC end of the inverter. Avoid loosening and short circuits.

AC output

The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet.The switch of the home outlet must be turned on.

Note 1: The local power grid must be normal. In case of power failure, the inverter will automatically stop working (island protection)

Note 2: The household outlet switch must be turned on. Otherwise, the inverter cannot be synchronized to the grid.

Stackable Connection

The purpose is let small power inverter become high-power inverter.

In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid tie inverter 1000W of stack used is equal to 4000W, and the number of open stacks (No Quantitative Restrictions).

MPPT technology

Creative MPPT tech makes efficiency higher than 99%. Peak conversion 80%. Consider the conversion rate of solar panel is about 80%, for example, if you need 500W power output from the inverter, you need to connect it to a solar panel that 500 / 0.8 / 0.8 equals about 780W, (780w * 0.8 * 0.8 = 500w)

Multiple protections

Islanding; Short-circuit; converse connection; Low Voltage; Over Voltage; Over temperature Protection

Fan Cooling

Intelligence Fan-on temperature >45℃ and off < 40℃. High-speed ventilation fans to help keep the inverter running at a low temperature.

Product description

The high-powered smart grid-ready Enphase IQ7A-72-2-US Micro dramatically simplifies the installation process while achieving the highest system efficiency for systems with 60-cell and 72-cell modules. Part of the Enphase IQ System, the IQ7A-72-2-US Micro integrates with the Enphase IQ Envoy, Enphase IQ Battery, and the Enphase Enlighten monitoring and analysis software. The IQ Series Microinverters extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty of up to 25 years.

User questions & answers

Question:	Is this the best emphasis inverter to get for a 405 watt panel
Answer:	According to the Enphase web site you could also use the IQ 7+. The spec show maximum input of 440 Watts per panel.
Question:	does this include the MC4 connector as shown in the photo
Answer:	yes
Question:	What the difference between this iq7a and the iq
Answer:	less clipping on higher wattage modules with the 7A. If you are using a module above 340 or 350, the 7A is probably a better fit.