14 best roof type for solar panels
Choosing the right roof type for solar panels is crucial to maximize energy production and ensure the longevity of your solar system. Here are some considerations:
Orientation and Tilt:
- South-facing roofs typically receive the most sunlight in the Northern Hemisphere, while north-facing roofs are preferable in the Southern Hemisphere.
- The tilt angle of the solar panels should match the roof's slope for optimal energy capture.
Material:
- Solar panels can be installed on various roofing materials, including asphalt shingles, metal, tile, and flat roofs.
- The material should be durable enough to support the weight of the solar panels and withstand weather conditions.
Age and Condition:
- Ensure that your roof is in good condition before installing solar panels. If your roof needs replacement soon, it's advisable to do it before installing solar panels.
Shade:
- Avoid installing solar panels on a roof that is heavily shaded, as this can significantly reduce energy production. Trim overhanging branches if necessary.
Weight Capacity:
- Solar panels add weight to the roof. Ensure that your roof structure can support the additional load. If in doubt, consult with a structural engineer.
Roof Slope:
- Solar panels are most efficient on roofs with a slope between 15 and 40 degrees. This range allows for good sunlight exposure without compromising stability.
Flat Roofs:
- For flat roofs, solar panels can be mounted at an angle to optimize sunlight exposure. Ballast systems or mounting racks may be used to secure the panels.
Roof Color:
- Dark-colored roofs absorb more heat, which can affect the efficiency of solar panels. However, this impact is generally minimal.
Local Regulations:
- Check local building codes and regulations regarding solar panel installations on roofs. Some areas may have restrictions or guidelines.
Professional Assessment:
- Consult with a professional solar installer to assess your specific roof and determine the best installation approach.
Remember, the goal is to have an efficient and durable solar panel system that complements your existing roof structure.
Below you can find our editor's choice of the best roof type for solar panels on the marketProduct description
When you install the solar panel cable on your RV or boat? You need to make a cut in the roof of the RV. To avoid making unsightly and potentially leaky cable entries, use the Haoguo Solar Cable Entry Gland to cover the area, making it fully waterproof.
Installation steps:
1. Clean the position of the solar double cable gland that needs to be installed, and pass the cable on the solar panel from the terminal into the waterproof cover.
2. Peel the surface of the 3M waterproof tape at the bottom of the waterproof cover, then pull the cable into the inside of the RV and attach the waterproof cover to the position where it needs to be installed.
3. Finally use screws to ensure stability. (The self-tapping self-drilling screw does not need to be punched in advance, it can be fixed directly)
Specification:
Size: 4.4*3.6*1.57 inch
Material: ABS plastic
Suitable for: All Cable Types 2mm² to 6mm²
100% MONEY BACK GUARANTEE: We offer every customer with 100% money back policy. If you are not satisfied with our product, you are welcomed to contact us for refund or replacement with no question asking.
- Waterproof Cable Gland: Used for all cable types 2mm² to 6mm², widely used in solar projects during wiring to create a weatherproof seal
- Upgraded version: High quality ABS material prevents oxidation of long-term exposure to UV light. The compact, lightweight design eliminates the cable entry for ugly and leaky solar panels. The unique curved design of the surface reduces wind resistance and noise to a certain extent
- 3M waterproof tape: 3M waterproof tape of the same size as the bottom of the case, effectively avoiding the ugly sealant covering the roof. The inside and outside of the waterproof cover have a unique raised design, and the gland can form an angle to prevent water from flowing backwards. Widened edges for improved sealing and water resistance
- New upgrade without drilling: Directly fix it with the 3M waterproof tape. 3M waterproof tape is attached to the bottom of the waterproof cover, which has enough fixing capacity to firmly fix it on the roof of RV
- Widely used: Suitable for most round cables for solar panel, air conditioning, lighting etc. Which is an ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on RVs, garages, etc
Product description
ABS solar cable entry gland is an ideal solution for installing solar panels on RVs, caravans, boats, etc. It can cover the cable, make the space more tidy, and prevent the cable from entering the car or indoor damage.
Features:Two different sizes of rubber sealing rings are great for 2Awg-12Awg cables.
With special internal spacing, the fixed head will no longer slide regardless of tightening or loosening.
The PG7 solar cable entry gland box with waterproof design is also UV resistant and suitable for any environment.
The solar double cable entry gland can be installed in various ways, fixed with glue or screw. Industrial grade ABS material, excellent durability.
The cable entry housing mount adopts streamlined design to reduce wind resistance.
Low maintenance, easy to clean and long service life.
Product information:
Material: ABS
Size: 5 x 3.6 x 1.6 inch
Suitable for all Cable Types 4mm² to 12mm²
Color: Black
Weight: 1.8oz Package includes:
1 x ABS white solar cable entry box
2 x Cable glands
4 x Rubber seals
3 x Stainless steel self-tapping screws
- 【Multi-purpose】Cable entry plate is suitable for most round cables for Solar Panel,DC power, Aerial, satellite, Air conditioning, Lighting etc., and also great for routing the cables on the solar panels of RV, caravan, vehicle, ship, garage, engine room building, building, shed, etc. Ideal for cables running through the roof.
- 【More fit for cables】PG7 waterproof solar cable entry gland comes with two sets of different sizes of waterproof rings, dual cable entry, which are suitable for all types of cables from 4mm² to 12mm² (2Awg-12Awg), and are more suitable for cables.
- 【Fixed head upgrade】According to feedback, the internal fixed heads of many products on the market are easy to loosen. We improved the internal structure of the cable entry gland, completely solved this problem, and greatly improved your work efficiency.
- 【Unparalleled quality】The double cable entry gland box is made of UV-resistant industrial-grade ABS material, which is durable and resistant to aging. Streamlined design can reduce wind resistance. Recyclable, work fine in any environment.
- 【Easy to install]】According to different installation positions and sealing requirements, you can use glue to fix the solar cable entry box, such as Sikaflex 221, Sikaflex 252, 291, dicor sealant or similar materials (not included), or drill on the wide edge at any position, fixed with the stainless steel self-tapping screw (included).
User questions & answers
Question: | Can I install it on my boat |
Answer: | Yes, sure. The cable entry plate is waterproof and UV resistant. Its sides are very wide, you can use glue to fix it. |
Question: | Does it come with a gasket to prevent water intrusion |
Answer: | The two pieces that the wire comes out of seal down when you tighten them making them water tight. |
Question: | How did you install it |
Answer: | I marked the hole on the roof of my RV, drilled the hole, put the wire inside the waterproof box, and then went through the roof. |
Question: | I like this product very much and I want to know if it is waterproof? Did anyone leak during use |
Answer: | I didn't have any leakage problems and I used not only glue but also screws and it worked very well so far,I'm happy with it. |
Product description
Our company has an experienced professional technical team to help customers solve various solar charging problems, so that we can use pollution-free solar energy. That batteries will slowly leak after being stored for a period of time. And it will consume power for a long time, which will make the battery unchargable. Therefore, we can use our solar charger to charge and maintain the battery.
This product has the following characteristics:
1. Using high-efficiency monocrystalline solar cells, even if the panel is smaller than the traditional model, it still can achieve higher power efficiency.
2. Equipped with a charging controller, it has various protection functions that never cause any damage to the battery.
3. It is convenient to charge as long as there is sunlight to charge the battery.
4. Easy to connect. No need to pull long and complicated extension cords. At the same time it works under human body safety voltage and is very safe.
5. The surface is made of glass and easy to clean.
Reminder:
1. Before connecting the wires, separate the red and black clips to avoid collision and short circuit.
2. This product is a solar charging board which should be installed in a place where the sun is shining directly. The more sunlight, the better the charging effect.
Specification:
Solar Panel Type: Monocrystalline
Maximum Wattage: up to 100 watts
Current at max: 5.3A
Open Circuit Voltage: 22.5V
Operating Voltage: 12V
Size: 41.7*21.3*1.2 inch
Weight: 16.1 lbs
Packing list:
1x solar panel
1x alligator clip
1x waterproof controller
1xSAE cable
4 x Z-shaped solar panel aluminum alloy bracket
8 x long cap bolt with rubber washer
4 x short bolt
4 x nut
4 x spring washer
4 x flat washer
- 【Outstanding Quality】100W solar panel adopts well-built monocrystalline cells with high conversion efficiency up to 24%. Using Tempered glass, weatherproof film and plus aluminum frame for excellent extended outdoor use.
- 【Easy Installation】There are 4 mounting holes on the back. The Z bracket mounts that come with the product can easily install the solar panel on the wall and the roof without any extra maintenance.
- 【Controller】Improved Waterproof Controller, higher charging efficiency, with enhanced reverse connection protection, load overload protection, temperature control and other functions.
- 【Multifunctional】When camping or traveling with family, it can be used in RV, car, boat, camper, jet ski, caravan, water pump, shed, etc.
- 【Warranty】25-year transferable power output; 5-year material and workmanship; 7*24h technical service support.
User questions & answers
Question: | What battery can I use? A 12-volt |
Answer: | Keep the solar panel controller and Battery as close as possible then run your 40 feet to the fan motor from the battery. You can keep the solar panel up to 20 feet away from the controller with no problem |
Question: | Is the solar panel connection universal |
Answer: | No |
Question: | Is this charge controller waterproof |
Answer: | Turn the USB port on and off also set the voltage at which it will automatically turn off if it goes below a certain voltage that you said like 11 or 12 volts so you don't run the battery down |
Question: | Can i hace two 100w panels on this controller |
Answer: | The solar panel is used to charge a 12 volt deep cycle battery. The battery is then connected to an inverter power supply that converts 12 volts dc to 120 volts ac. The answer to your question is no it will not power the shed by itself. The more batteries you use the more power you can store. One battery and a 1000 watt inverter should power a light and small power tools. |
Product features
Specification
Maximum Power: 100W
Maximum Power Current: 5.3A
Maximum Power Voltage:18.9V
Operating Voltage: 12V
Open Circuit Voltage: 22.5V
Short Circuit Current: 5.7A
Weight: 16.1lb
Dimensions: 41.7*21.3*1.2 inch
Solar Panel Type: Mono-crystalline
High Efficient Cells
Topping mono-crystalline solar cells with high transmission delivered high efficiency for modules. The conversion rate can reach up to 24% under Standard Test Condition.
Junction Box
High sealing junction box. It can effectively block water droplets and water vapor from outside. Even if soaked in water, the internal components will not be any damage.
Waterproof controller
Improved Waterproof Controller, higher charging efficiency, with enhanced reverse connection protection, load overload protection, temperature control and other functions.
Waterproof Structure
Great waterproof performance. Tempered glass brings excellent waterproof protection for the panel. Anodized aluminum frame of good insulation and corrosion resistance let you leave it outdoors for decades without worries.
Product description
The Renogy corner bracket mount is a great drill-free alternative mount for your solar System. These light weight brackets can be used with virtually any aluminum framed solar panels to provide drill-free & secure mounting to flat surfaces. This well constructed mount lifts your solar panel to provide an optimum height that establishes an air gap between the panel & the surface, assuring your panel stays cool in high temperatures. With the Renogy corner bracket installation on most motorhomes, caravans, RVs, & boats are cleaner & flexible.
- Drill-free solar panel mounting. Designated for virtually any aluminum framed solar panels.
- 100% recyclable and UV resistant. Non-corrosive, long lasting, and high quality ABS plastic construction.
- Best suitable for any flat building surfaces of aluminum, wood, or GRP material.Corner Bracket Dimensions (l x w x h) 5.9 x 5.9 x 2.3 inch
- Easier and more flexible installation with no potential roof leaks.
- Strong side support for Small and large Solar panels. Compatible with all Renogy Solar modules.
User questions & answers
Question: | Can i use a different brand solar panel with these? i have a 300w csun panel for my camper van that did not come with brackets |
Answer: | I use quite a number of these mounting brackets on various panels but I have to drill new mounting holes in the panels. |
Question: | Can I use this on a flex solar panel |
Answer: | I have not, but I wouldn't try it unless you were mounting it flat against the roof. I'd be concerned about the wind getting underneath it at highway speeds. Another option might be to make the bracket removable and mount it on the side or in back of the RV while stationary. |
Question: | I called the manufacturer of sikaflex-252 and they said this product is not recommended to hold down solar panels on rv roofs, is that true |
Answer: | Yes, I think it would work fine for that. |
Question: | Does this come with nuts and bolts to fasten a solar panel to the plastic mounts |
Answer: | There was a photo on the Amazon sales page for this item and it showed the larger rack support holding a 100 watt panel. The photo did not say it was a 100 watt panel but I work with them a lot in the ham radio community so was able to easily spot it as being a 100 watt panel - you should be good to go. Most everybody has to drill at least 4 mounting holes to secure it to the support arms. Use a center punch, drill a small pilot hole then a bigger hole to match your machine screw size. My guess is #12 should be about right - I have the smaller size unit and #10s were what I used on that unit. My set up has a Genasun IP67 rated controller on the back side of the panel - makes a great neat/compact arrangement (I installed it there). The Genasuns' are pricey but they are water proof, compact and work very good - also sold on Amazon. |
Product features
Description
The Renogy Corner Bracket Mount is a great drill-free alternative mount for your solar system. These light weight brackets can be used with virtually any aluminum framed solar panels to provide drill-free and secure mounting to flat surfaces. This well constructed mount lifts your solar panel to provide an optimum height that establishes an air gap between the panel and the surface, assuring your panel stays cool in high temperatures. With the Renogy Corner Bracket installation on most motorhomes, caravans, RVS, and boats are cleaner and flexible.
- 【Cable Entry Gland Features】: Made of industrial grade ABS, UV resistant, weatherproof and aging resistant. Designing with curved surface, it can reduce wind resistance, 100% recyclable, and very durable in any environment.
- 【PG7 Waterproof Cable Gland】: Equipped with two different sizes of waterproof rings, for all types of cable from 4mm² to 12mm², widely used for solar project when wiring. It is easy to install and good waterproof.
- 【Cable Fixed Head Will No Longer Slide】: The internal part of fixed head of some products will be loose. We have solved this problem, and the nuts won’t slide whether it is tightened or loosened.
- 【Multipurpose】: Great for solar panel, DC power supply, aviation, satellite, air conditioning, lighting and other circular cables, it is also suitable for routing the cables on the solar panels of RV, caravan, vehicle, ship, garage, engine room building, building, shed, etc. Ideal solution for the cables getting through roof.
- 【Easy to Install】: Based on the position and sealing requirements, it can be fixed with glue, such as Sikaflex 221, 252, 291, Dicor sealant (not included) or stainless steel self-tapping screw (included).
User questions & answers
Question: | Will this fit 8 AWG solar wire |
Answer: | This waterproof ABS Double Cable Entry Gland is suitable for 8AWG cable. |
Product features
You can use our special solar cable entry gland box, which can not only cover the exposed cables, but also make our space look clean and tidy. It is completely waterproof and has a beautiful appearance.
Specification:
Material: UV resistant ABS
Size: 5 x 3.6 x 1.6 inch / (12.8x9.2x4cm)
Suitable for : All Cable Types 4mm² to 12mm²
Color: Black
Weight: 1.8oz / (50g)
Great for outdoors
- Contains UV inhibitor to protect against UV rays.
- Stronger, more durable and weatherproof.
Two sizes, special spacing
- Two different rubber ring sizes to meet different diameter wires.
- The special design makes the fixed head no longer slide.
Easy to install
- Just apply glue to the bottom and edges.
- Wide edge, reserved for punching position.
How to clean
- Wipe with a damp cloth and then dry with a dry cloth.
- Apply toothpaste to hard-to-clean stains, then wipe dry.
Product description
Item Descriptions:
-Package List: This solar panel mounting kit contains 8pcs 4 hols mounting brackets, 40pcs bolts, 40pcs washers and 8pcs nuts.
-Z Type Design: Unique design, ideal for irregular surfaces, can mount panels to motorhome, caravans, yacht, sheds roof etc.
-High Performance: Made of high quality aluminum alloy, anti-corrosion, anti-rust, wear-resistant and durable in use.
-Bracket Size: The width of the mounting screw panel is 30mm/1.18inch, and the overall length is100mm/0.39inch.
-Easy to use: Lightweight aluminum alloy construction, it is easy to carry and install, ideal for mounting a range of solar panels.
-Note: Please allow 1-3mm errors due to manual measurement.
Package:
8x 4 Hols Solar Panel Mounting Brackets
40x Bolts
40x Washers
8x Nuts
Item Specifications:
Length:100mm/0.39inch
Installation Panel Width:30mm/1.18inch
Thickness:2mm/0.07inch
Application:For Solar Panel installation
Material:Aluminum Alloy
Colour:Silver
Brand:Unbranded/Generic
MPN:[AUTO FILL EAN]
- Z Type Design: Unique design, ideal for irregular surfaces, can mount panels to motorhome, caravans, yacht, sheds roof etc.
- High Performance: Made of high quality aluminum alloy, anti-corrosion, anti-rust, wear-resistant and durable in use.
- Bracket Size: The width of the mounting screw panel is 30mm/1.18inch, and the overall length is100mm/0.39inch.
- Easy to use: Lightweight aluminum alloy construction, it is easy to carry and install, ideal for mounting a range of solar panels.
- Package List: This solar panel mounting kit contains 8pcs 4 hols mounting brackets, 40pcs bolts, 40pcs washers and 8pcs nuts.
- 【Solar Panel Mounting Brackets High Bending Strength】Using high-quality aluminum alloy materials, high strength, corrosion resistance, UV resistance, high frequency insulation performance, will not be affected by hot, cold or humid weather.
- 【Easy to Install Solar Panel Z Brackets 】There are Pre-drilled holes in the surface, and the provided bolts and washers can be used to easily install. With the use of our organic silicone water with excellent performance, the effect is better. Easy to install and remove.
- 【Safer and More Practical Unique Design 】The Solar Panel bracket is lightweight and compact, thin but very solid. The ventilated Z-shape with extra edge is exactly what you need to protect the solar panel battery.
- 【Widely Used Solar Panel Bracket】Convenient for recreational vehicles (RV), boats, RVs, cabins or other places where you need to install. Very suitable for installing 20W to 300W solar panels.
- 【What You Can Get】4 safe and delicate brackets, two different sets of mounting accessories, 1 bottle of sealant. Provide 12-month warranty and lifetime technical support.
Product features
POWOXI Aluminum solar panel mounting Z bracket is an ideal solution designed to install solar panels and be installed on other places such as RVs and ship roofs.
unparalleled product quality
- High strength
- Anti-UV
- High frequency insulation performance
- Not affected by hot and cold
- Easy installation and long life
Super Firm
- High strength, high bending resistance
- Support tab side protection
- Can withstand extreme weather conditions
Economical and Practical
- Can balance current to prevent accidents
- Great for 20W-300W Solar panel
- Convenient for installing on RV, roof, wall and other place
Install easily and Quickly
- Multiple holes and glue to firmly fix the solar panel
- When installed on the roof, it can be used together with aluminum strip
- Wipe with a soft cloth moistened with water or neutral detergent
Specification:
Material : Aluminum alloy material
Color : Black
Weight : 10.9 oz / (310g)
Single Z brackets 1.41 oz / 40g
Dimensions :
Single Z brackets 3.9x2.6x1.4.inch /(10x6.5x3.2cm)
Product description
Features: - Includes 30A PWM Controller with LCD Screen - Portable and Easy Set-Up - Sleek Design for Aesthetic Quality - Grade A Mono Solar Cells - Higher Module Conversion Efficiency - Optimally Generate about 67Ah in 12V Battery or 800WH per Day - Anodized Aluminum Frame to Protect Solar Cells & Convenient for Installation - Foam Box for Safe Transport and Easy Storage - Dust Tight and Waterproof with IP67 Rating - Set Up in Just 5 Minutes for Solar Starters - Used for Marine, Dry Camp, RVs, and Other Off-grid Applications What's in the Box: - 100W Mono Solar Panel - Sets of Mounting Brackets - (10) Wire Fixers - 3 ft. 11 AWG Cable Set (Connected already with Solar Panel Junction Box) - 20 ft. 11 AWG Sheathed Cable Set with Aviation Connector - 8 ft. 11 AWG PV Cable Set with Ring Terminal - 15A Fuse - 30A PWM Controller Technical Specs: - Power Supply: 100W (Each) - Fuse: 15A - Short-Circuit Current (Isc):5.85A - Open-Circuit Voltage (Voc): 23.1V - Maximum Power Current (Imp): 5.32A - Battery Type: 12V Lead-acid and Lithium-ion Batteries (Battery Not Included in the System) - Cell Type: High-Efficiency Monocrystalline - Operating Temperature: Controller and Inverter: -20?-50? - Solar Panel: -40?-85? - Controller Voltage: 12V/24V - Max. Input: < 50V - USB Output: 5V/2A - Standby Current: < 12mA - Type of Connector: Aviation Connector - Wire/Cable Length: 35.4 -inch - Product Dimension: 35.4'' x 26.4'' x 1.4'' -inches
- 2 PIECE SET: Comes w/ 2 reliable 100 watt solar panel 12v/24v & features higher module conversion efficiency and can optimally generate about about 67Ah in 12V battery or 800WH per day. Has maximum power current (Imp) of 5.32A & 5V/2A USB output
- 30A PWM Controller: The 100 watt 12 volt solar panel kit comes w/ a 30A PWM controller with LCD screen so you can switch between different interface or to easily adjust the parameter setting by the simple press and hold
- IP67 WATERPROOF: SereneLife 24v/12v 100w solar panel solar kit for van/campers are IP67 marine-grade waterproof and features an anodized aluminum frame to protect solar cells & convenient for installation
- VERSATILE APPLICATION: This solar panel board is perfect for any off-grid application & suited for applications that require a smaller footprint. Used for marine, dry camp, RVs, trailer, boat, shed, cabin, golf car, electric car, camper & more
- INSTALLATION READY: Pre-drilled holes at the back of the panel for easy mounting. Comes w/ mounting brackets, 10 wire fixers, 3ft 11 AWG cable, 20ft 11 AWG sheathed cable set w/ aviation connector, 8ft 11 AWG PV cable set w/ ring terminal, & 15A fuse
User questions & answers
Question: | In regards to the 30a pwm controller, how many input watts can it take? in short, how many of the 100watt solar panels can be daisy chained |
Answer: | TP-solar 100W flexible solar panel is coated with ETFE material. |
Question: | Where is this made |
Answer: | sorry, have no the measurements like that. |
Question: | Can you add more panels to this kit |
Answer: | The 100W flexible solar panel can be curved to a maximum 30 degree arc, allowing to be mounted on an RV, boat, cabin, tent, car, trucks, trailers, yacht, motorhome, Roofs, or any other irregular surface. |
Question: | Can i expand from two panels to four in the future or do in need to upgrade something |
Answer: | one year warranty, and lifetime technical support. |
Product features
30A PWM Controller
The 100 watt 12 volt solar panel kit comes w/ a 30A PWM controller with LCD screen so you can switch between different interface or to easily adjust the parameter setting by the simple press and hold
IP67 WATERPROOF
SereneLife 24v/12v 100w solar panel solar kit for van/campers are IP67 marine-grade waterproof and features an anodized aluminum frame to protect solar cells & convenient for installation
100W POWER
This reliable 100 watt solar panel 12v/24v features higher module conversion efficiency and can optimally generate about 33.4Ah in 12V battery or 400WH per day. Has maximum power current (Imp) of 5.32A & 5V/2A USB output
Product description
Link Solar ABS Solar Cable Entry Gland is used for the passing of cables into the Motorhome ,from the Solar panel ,or for use on yachts /boats for cable entry from the mast.
It can also be used for other installations and structures such as buildings, garages, sheds and other roofs
Manufactured by Link Solar
- PG7 Waterproof cable gland used for all cable types 2mm² to 6mm² in Dia ,Widely used for solar project when routing the cables
- Suitable for most round cables for Solar Panel,DC power, Aerial, satellite, Air conditioning, Lighting etc
- Can be fixed with Glue (not included) Sikaflex 221 Sikaflex 252, 291, dicor sealant, alike or stainless steel self-tapping screws (not included) depending on position and sealing requirements etc
- The whole set is within 1 ABS white box, 2 cable glands ,2 rubber seals
- An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc
User questions & answers
Question: | What awg sizes are 2mm to 6mm? saying that in the ad would save everyone in the usa a lot of doubt |
Answer: | Tomorrow |
Question: | What size works best with 8 AWG wire which is about 6mm in diameter |
Answer: | Sure. You can put it in the windshield but not while you're driving. They are pretty big. Mine is in my camper right now but I'd say 20"x14". If you're gonna be parked like an RV then sure but I wouldn't drive with it there. These are not flexible. I stand mine up on the ground and clean it against the hitch on my popup. It kept my battery good and ran lights and 3 cell phone chargers. |
Question: | For those who drilled holes to attach cable entry gland to the rv roof, how many holes did you have to drill and what size screws did you use |
Answer: | Yes, the panel and controller can output up to 30 watts (2.5 amps at 12v). |
Question: | Can you put a 10ga cable through the hole |
Answer: | The controller I received is 5.25 in x 2.75 in x 1.25 in. you might want to get a container that is larger than the 5.25 in so you have room for wire connections. |
- HARNESS THE POWER OF THE SUN: Mount your solar panels using our set of Z Brackets. Includes four sets of brackets and all necessary hardware.
- DIVERSE USE:These brackets are ideal for mounting solar panels to recreational vehicles, boats, cabins, and more. Each set is suitable for mounting one solar panel up to 150 Watts.
- QUALITY CONSTRUCTION: Our brackets feature a quality lightweight construction composed of trusty, rust-proof aluminum. Keep your confidence in these brackets through all weather conditions!
- INCLUDED IN THE SET:Each kit includes four sets of four brackets (sixteen brackets totalt) and all necessary bolts and washers.
- INTUITIVE INSTALL: These brackets are a breeze to install – easy, fast, solid, and strong.
User questions & answers
Question: | How much weight can these support.. saying the wattage isnt realistic since there are light weight panels with higher wattages |
Answer: | The brackets are sturdy. Each one could support 6-8 lbs, so 4 could support a panel up to the 20-30 pound range. |
Product features
USE THEM HOW YOU NEED THEM
The shape of these brackets make them ideal for mounting smaller solar panels (up to 150 watts) to irregular surfaces, such as recreational vehicles, boats, cabins, and more.
INSTALL YOUR SUN CATCHER
Have you been thinking about mounting solar panels to your RV? There is no time like the present! Use our quality designed Z-brackets to effortlessly install your panels. Benefits of solar power include: saving money on fuel, reducing your carbon emissions, lower maintenance, noise reduction, and freedom from standard campsites.
- 【 Decent Warranty for Its Part 】- We always stand behind our products, if the motor of the fan doesn't work, or you find the unit miss some part, such as the screws, please feel free to contact our customer service for help, we will send you replacement parts, thanks.
- 【 Efficient in Low Light Condition 】- The solar attic fan can work automatically at low voltage, the Min Voltage to operate is 4V, so you also get great ventilation even on cloudy days.
- 【 Cost-Saving & Affordable 】- The solar fan system cools your roof and also reduces the load on your air conditioning system, it will cut your cooling costs with low electric power expense.
- 【 Well-Made Quality 】- The materials of the high volume solar attic ventilator is well built of good quality. The tolerances of the solar vent fan are pretty tight, and it runs reasonably quietly.
- 【 Easy to Install 】- It's a ready-to-use solar fan for home, shed, garage or RV, outdoor, etc. The solar roof vent fan comes with a pre-installed 8-inch solar cable with quick-connector, and the solar panel comes 16 feet solar cable, which lets you to easily install it with the quick-connect wires. It could be installed in the gable vent or anywhere in the attic.
User questions & answers
Question: | What is the warranty |
Answer: | warranty for a year for the fan,5 year for the soalar panel, totally take responsible for damage or lost in transit. Any issue will be followed by professional customers service team. |
Question: | Has anyone gauge the attic heat tempreture reduction as a result of using this |
Answer: | I did not measure the temperature difference, but it did not seem to make a difference. The fan does run quite strong so I suspect that it does pull heat out of the attic (that is, after you reverse the fan in its shroud so that it blows outward). However, I was very disappointed, after the fan motor completely died after two years. |
Question: | Can this get wet? Weatherproof |
Answer: | I mounted it in the roof gable vent and covered it with the slotted vent cover, so it doesn't get wet unless the rain is horizontal. Anyway, the motor burned out after two years. I don't recommend this product. I'm going to remove it and install a hard-wired electric attic vent fan. |
Question: | Can someone recommend a thermostat to install with this fan |
Answer: | It does not have a place to plug in for a thermostat. I purchased a thermostat and did not use it. I have installed others that have a place to just plug a thermostat in. I would search for one of those fans. |
Product features
Outdoor Activities
Small and light, easy to put the solar fan kit into your bag when you go fishing, climbing, cycling, etc. Plug and play, easy to set up it under the sun light when you feel hot, you will feel cool.
Installed in the Garage
Installed it in garage, then you can get the fresh air and cool the garage. No need to breathe the dull air when you drive into the garage.
Hanging on the Tree
When you work in the farm on a sunny day, you can hand the fan to the tree and there is a 16 feet solar cable, so you don't have to worry about the tree would cover the panel.
Installed in the Attic
Installed the fan in the attic, it will cut your cooling costs with low electric power expense. It's great to breathe the fresh air when you walk into the attic.
High Efficient Poly 30W Solar Panel
- Max Power at STC: 30W
- Max power voltage (Vpm): 16V
- Short circuit current (Isc): 1.83A
- Max power current (Ipm): 1.67A
- Open size: 27.8*13.8*0.7in (707x350x18mm)
- Folding size: 13.8*13.8*1.5in (350x350x38mm)
- 【FOLDABLE AND LIGHTWEIGHT EASY TO CARRY】-- This solar panel photovoltaic packs 220W of power yet is only 0.9inch (2.4cm) thick and weighs only 9lb (4.1kg), making it easier to mount,transport, hang, and remove.Dimension:21.2*28.7*0.9(inch)
- 【PERFECT CHOICE FOR OUTDOOR AND EMERGENCY LIFE】-- The panel is well protected in a thick fabric pocket sewn. A practical carrying handle is available easy to carry and use and with,118inch (3M) cable length from panel to controller, Ideal to use for RV, caravans, camping,motor,homes,cars,roofing,motorcycles,boats,snowmobiles,tractorscamping, climbing, hiking, picnic, charging your car battery, or in emergencies,shine a light on your shed
- 【HIGH CONVERSION EFFICIENCY】: With high efficiency monocrystalline solar cell, you will get greater power efficiency even though the panel is smaller than a traditional model.
- 【FREE SOLAR CONTROLLER for you (save 30 dollars)】Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.Integrated 5V 2A USB ports to charge USB devices.
- 【AMAZON LOCAL WAREHOUSE DELIVERY+ INTIMATE AFTER-SALES SERVICE】-- Amazon FBA delivery, Receive goods in time,any questions you can contact us at any time, we will do our best to provide you with a satisfactory solution to ensure that you will not suffer any loss.If the accessories are lost in transit, please contact us as soon as possible and we will reissue it to you
User questions & answers
Question: | Can this be configured for 36V output optimum rather than 18 Volt |
Answer: | The Paxcess 60W portable solar panel is 6.17lb (2.8kg) |
Question: | you have another choice for shipping more fastest |
Answer: | You don't need a portable power station. There is 1 usb outlet. There are a few other adapters. Read the description, depending on your laptop you might need an adapter. I personally would do a laptop on the 120 if going with solar for computer. I prefer my 12v car inverter for my laptop. 2nd choice, my power station. But my laptop takes a couple hours for full charge, longer for solar. |
Question: | What is being done about the delamination issues I have been reading about? I thought I saw somewhere that a beefier model is on the market for more |
Answer: | Yes |
Question: | What type of plug connection does it have |
Answer: | It's designed to charge portable power stations like jackery or rock pal not gas generators... maybe I'm not comprehending what you're asking correctly 🥰?... |
Product features
About DOKIO
The company DOKIO Energy Technology Co., Ltd. is specialized in the production and processing of solar panels. Founded in January 2007,By January 2020, DOKIO solar panels have reached the top 10 among the global online brands. through IS09001 international certification, German Rhine certification, some products also have practical patents. the company now has dozens of overseas warehouses in the United States, Canada, Japan, Brazil, Italy, Spain, Germany, Britain, Russia, Poland, etc
Questions & Answers
Question: Are this units waterproof?Can these solar panels be permanently instaled outside or would they deteriate over time ?
Answer: Yes,It is waterproof ,BUT meant for temporary or emergency use only. Not designed for permanent installation or prolong weather exposure.DON'T leave them out at night or in bad weather.
NOT day-in day-out exposure. Sun damage to fabric case is most likely
Question:Why the solar can not produce 220W power when charging to power station?
Answer:As you know , the solar panels are affected by many factors: such as the light intensity and the panel's angle put on the ground. 220w is tested in an ideal laboratory. However, the intensity of the light constantly changes. In addition, the angel of the light illuminating the solar panel also changes with the rotation of the sun.
Folds Flat and Easy To Store
Weighs:only 11lb (5.3kg),
Foldable Dimension:28*20*0.9inch
(70*50*2.4 cm)
Solar Charger with Usb Outputs
Equipped with 2* USB output port , charging multiple small devices at the same time, including smartphones
What you GET!
1*DOKIO 220W solar panel
1*DOKIO Waterproof Bag
1*DOKIO 20A controller
3*Cable
5*DC plugs
Product description
The tilt mount will support off-grid systems, and will support Renogy solar panels up to 150W. However, please note that angle adjustability will decrease as the panel size increases. The tilt mount is designed to allow adjustment of the panel for optimum performance. The tilt mount can be used on any flat surface, provided that the correct fastening techniques are applied. This owner’s manual will cover how to assemble the tilt mount and how to fasten it to a panel. Because there are many fastening techniques available, this manual will discuss only one of the many basic approaches to mounting on a flat surface.
- Can be used on any flat surface
- Ideal for positioning solar panels at an angle on a rooftop
- Maximum tilt angles depend on the size of the panel
- Light weight aluminum alloy material
- Ideal for easy transportation and safe mounting
User questions & answers
Question: | Is the Mount adjustable...that is can you adjust it so that 21" X 46" Solar panel can be mounted vertically |
Answer: | Mount is designed to accomodate panel in horizontal position only. Max panel width (or height in the case of vertical mount) is around 26.5 inches. There is no adjustment in the other direction. |
Question: | How easy is it to adjust the tilt? Does it require tools |
Answer: | it has Allen screws that tighten and loosen it. Simply pull up or push down. Very easy install. |
Question: | Can they be folded down flat for transport |
Answer: | You can probably fold them flat but they are for permanent installation so it is just as easy to remove them if you need to move the panel. |
Question: | What sizes of pipe or pole will this work with |
Answer: | Every thing I read says a 4" pole. I was able to mount mine on a 4 x 4(Wood) without any problems with the included equipment. I am sure the metal 4" pole is recommended, but a 4 x 4 will work depending on your application, at least it did for me |
Product features
Renogy Tilt Mount Brackets
The tilt mount will support off-grid systems, and will support Renogy solar panels up to 150W. However, please note that angle adjustability will decrease as the panel size increases. The tilt mount is designed to allow adjustment of the panel for optimum performance. The tilt mount can be used on any flat surface, provided that the correct fastening techniques are applied. This owner’s manual will cover how to assemble the tilt mount and how to fasten it to a panel. Because there are many fastening techniques available, this manual will discuss only one of the many basic approaches to mounting on a flat surface.
- Perfect for 12 volt battery charging, multiple panels can be wired in series for 24 48 volt batteries charging. It is better to use with a controller to protect the battery, The attached cable compatible with Connector, the solar panel can be connect to the solar controller/regulator easily.
- Good bendability: The solar panel can be curved to a maximum 30 degree arc, allowing to be mounted on an RV, boat, cabin, tent, car, trucks, trailers, yacht, motorhome, Roofs, or any other irregular surface.
- High conversion efficiency: High efficient monocrystalline solar cell, adopt unique back contact technology and remove electrodes on the solar cell surface that block the sunshine to increase the solar panel conversion efficiency up to 50% more efficiency than ordinary.
- Durability and high waterproof grade: High temperature resistance,easier to clean. The solar panel made of advanced water resistant material. It is far more durable than traditional glass and aluminum models.
- Lightweight and easy installation: Only 0.1 inch thick and weighs only 3.72 LBS, this solar panel is easy to transport, hang, and remove, 6 stainless eyelets at the edges for easy installation. Fast and inexpensive mounting, easy to transport and mount. It can be affixed by adhesives, silicon glues, double sticky tapes, zip ties or Velcro, perfect for non-permanent installations.
User questions & answers
Question: | Are these coated with upgraded efte plastic |
Answer: | The main cable is about 8 ft from memory. The other cables attach to the main cable and are about 12” long. |
Question: | Hello, do you have a flexible panel similar that had measurements close to 35"x 9" thank you Troy |
Answer: | yes, the solar charger comes with 2.4m cable and 3 pcs 1/2m connection cables including battery clamp, cigarette lighter socket and bare wire cable. |
Question: | You described the surface as "Pressed by concave and convex structure". How irregular is the surface? It sounds mirror flat with a reflection problem |
Answer: | Yes. This until doedn't need a brain, won't drain, and is set up to not over charge. Plug and play |
Question: | What is the warranty on these panels |
Answer: | The charge current is small in a day, so you have no need to worry about the overcharge, it is a trickle charger. If you put it there to charge battery continuously weeks, we would suggest you go with a charge controller. Visually LED indicator helps better undertand the working statue and full additioanl protections fully protect your battery, totally free maintenance. For more detail about the charge controller, check the page: https://www.amazon.com/dp/B07GPM98Q3 |
Product features
Topsolar 100 Watts 12 Volts Flexible Solar Panel
- Maximum Power at STC*: 100 Watt
- Optimum Operating Voltage (Vmp): 22.3V
- Optimum Operating Current (Imp): 4.4A
- Open-Circuit Voltage (Voc): 25.9V
- Short-Circuit Current (Isc): 4.6A
- Maximum System Voltage: 1000 VDC
- Dimension: 20.47 x 42.12 x 0.15inch (520 x 1070 x 4MM)
- Weight: 3.97 lbs
Waterproof and Durable
High temperature resistant, easy to clean. Solar panels made of advanced waterproof materials. It is more durable than traditional glass and aluminum model solar panels
Ultar-Thin & Ultra-Light Design
It's designed to be only 0.1 inches tall and weigh 3.97 pounds, so it can be used in most scenes where traditional solar panels can't be used, such as trailers, boats, cabins, tents, cars, trucks, trailers, yachts, trailers, roofs, or any other irregular surface.
High Conversion Efficiency
ETFE materials also have dirt resistance and self-cleaning capabilities to ensure optimal performance day after day. Topsolar flexible solar panels also use high-efficiency single crystal solar cells to improve the conversion efficiency of solar panels by 50%, which is 50% higher than that of ordinary solar cells.
Latest Reviews
View all
Personal Coolers
- Updated: 05.06.2023
- Read reviews

Ps4 Headset
- Updated: 22.01.2023
- Read reviews

Trumpet Mouthpieces
- Updated: 14.04.2023
- Read reviews

Gsp Pc Games
- Updated: 17.03.2023
- Read reviews

Star Wars Kid S Bikes
- Updated: 29.03.2023
- Read reviews