13 best off grid solar kit

• Output Power: 800Wh daily output depends on the sunlight availability, ideal for RV, Home, Boat, Camper, Caravan, Golf car, Electric car, Yacht, Boat, Tent or backpack etc.
• Solar Panel: Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa)
• Complete solar panel kit with 2pcs 20Ah lithium battery and 1000W solar inverter, easy setting up.
• Widely Use: with 20A LCD charge controller, can expand this kit up to 360W (12V)
• Warranty: 1 Year product warranty, any problems about the product please feel free to contact us

User questions & answers

Question:	Can i use this on a sailboat i am wanting to get more panels to make 550 watts could i do this with this setup? Thank you for your time
Answer:	Hi, you can use this solar panel kit on a sailboat. This solar panel kit come with 20A charge controller that can handle 360W solar panel when 12V. If you need 550 watts solar panel, you can buy this 600W solar panel kit, you can click this link for your reference :(https://www.amazon.com/dp/B079QH61YT). Wish it helps.If you have any problems, pls feel free to contact us through Amazon email.
Question:	Do I need to ground all negative terminals (solar panel, controller, inverter, and battery) to a standard 8ft. grounding rod driven into the Earth
Answer:	Hello, you just need to ground the inverter.
Question:	What plug type is required on the ac output of the inverter? it’s not a standard 110-120vac receptacle
Answer:	Hello, the plug of the inverter is an American universal plug, can be used for American equipment.
Question:	This is where I'm seeing about a Cable."You only need one battery cable, and this solar panel kit includes all cables except the battery cable
Answer:	The seller makes this very confusing in the description. Our order arrived with a battery cable with two ring terminals for the (+) and (-) side of the battery. It's about 10 feet long with Chinese only writing on the jacket with no indication of gauge. However, since you need to wire up the two batteries in parallel, you'll need to cut part of the cable and crimp on your own ring terminals to make the connection between the two batteries. So in a way, yes, you do need a battery cable but only between the two batteries to wire them in parallel and there is plenty of extra with the supplied cable. Hope that helps!

Product features

Package included:

• 2pcs 100W Monocrystalline Solar Panel
• 1pc 20A PWM Charge Controller with 5A USB Port
• 2pcs 20Ah LiFePO4 Lithium Iron Phosphate Battery
• 1pc 1000W 12V DC-110V AC Pure Sine Wave Inverter
• 1 pair of Y Branch Solar Panel Connector（parallel connection）
• 2 set Z Mounting Brackets
• 1 pair of 16.4ft 12AWG Solar Extension Cable
• 1 pc 6.56ft 11AWG Controller-Battery Extension Cable

ECO-WORTHY 100W Solar Panel

• Rated power: 100W
• Open-Circuit Voltage (Voc): 21.6V
• Short circuit current (Isc): 6.13A
• Working current (Iop): 5.78A
• Output Tolerance: ±3%
• Temperature range: -40℃to +80℃
• Size: 39.8*20.1*1.4 inch
• Weight:18.96 pounds

20A PWM Charge Controller with 5A USB Port

• Battery voltage :12V/24V auto
• Charge current: 20A
• Working current: 5.5A
• Usb port: 5V/2A
• Size/Weight: 138*85*30mm /150g
• Can be expanded 300W or 700W Solar System

20Ah LiFePO4 Lithium Iron Phosphate Battery

• Battery Capacity：20AH
• Battery Voltage：12V
• Continuous Charge/ Discharge Current：20A
• Peak Charge/ Discharge Current: 30A
• Maximum Charge Voltage：14.5V
• Discharge Cut-Off Voltage：10V
• perating Temperature: Discharging: -4°F to 140°F
• Battery Size：7.1*6.3*3 inch
• Battery Weight：4.85 lbs

1000W 12V Pure Sine Wave Inverter

• Output Volt: 110V AC
• Continuous Power: 1000W
• Surge Power: 2000W
• Frequency: 60Hz
• Effienvy: >90%
• USB Output:5V
• Fuse: 35A
• Over Load Shut Down: 120W over 10 second
• Over Thermal Protection:shut down the output
• Working Temperature: -10℃~+50℃

Product description

Package included:

20pcs 195W Mono solar panel

1pc 3500W 48V All in one charge inverter

1pc 6 string combiner box

6pcs solar cables

8pcs 100AH battery

1pcs tray cable

4pcs battery cable

20 set of Z style mounting brackets



b>195W Monocrystalline Solar Panel

Rated power: 195W

Open-Circuit Voltage (Voc): 21.6V

Short circuit current (Isc): 10.83A

Working current (Iop): 9.02A

Output Tolerance: ±3%

Size: 58.3x26.3x1.4inches

weight: 29.2 Lbs



12V 100AH AGM Deep Cycle Battery

Normal Voltage: 12V

Rated Capacity(20hr): 100AH

Battery Cell Type: Lead Acid

Weight:28kg(61.7lbs)

Dimensions: 330mm x 175mmx190mm(13''x6.9''x7.5'')



6 String Combiner Box

Input Circuits Breakers: 6

Circuit Breaker Rating: 10A

Protection Grade: IP65

Surge Lightning Protection: Yes

Size: 10.3*12.6*4.5 inch (260*320*115mm)

Weight: 10.8 lbs (4.9kg)



3500W 48V all in one charge inverter

AC Input MODE

Rated input voltage: 110/120Vac

Input voltage range: (90Vac~140Vac) ±2%

Frequency: 50Hz/60Hz (Auto detection)

Overload/short circuit protection: Circuit breaker

Efficiency: >95%

Conversion time (bypass and inverter): 10ms (typical)

AC reverse protection: Available

Maximum bypass overload current:40A



Invert MODE

Output voltage waveform: Pure Sine Wave

Rated output power(W): 3500

Rated output voltage(Vac): 120V AC

Peak Power: 7000VA

Bypass breaker specifications: 40A

Rated battery input voltage: 48V (Minimum starting voltage 44V)

Power saving mode: Load ≤25W

• Output Power: This premium solar panel kit daily output generate 16kwh per day under 4 hours full sunshine
• Package Includes: Solar Panels + All-in-one Solar Charger Inverter + Battery + Z Mounting Brackets + Solar Cable + Combiner Box
• All-in-one Solar Charger Inverter: Composed of 3500W 48V pure sine wave and 80A MPPT controller
• Safety Protection: Combiner box offers safety protection, with 10A fuse for each string, anti-backflow diodes and lighting protection.
• Warranty: 1 year warranty and 24/7 technical support team, call ECO-WORTHY hotline whatever any question or concern you have.

User questions & answers

Question:	Can you add a generator and what do I have to do
Answer:	5 hours or more depending on usage
Question:	Can you add additional panels
Answer:	Works perfectly with all switch games. A bit smaller than pro controller so might be perfect for smaller bands.
Question:	how long are the solar cables
Answer:	yes. it isrechargeable

Product features

195W Mono Solar Panel

• Output Power: 195 Watts
• Nominal Voltage: 18 Volts
• Maximum/Peak Voltage(Vmp): 21.2V
• Maximum/Peak Current(Imp): 8.89 Amps
• Size: 58.3*26.3*1.4 inch (1480*668*35mm）
• Weight: 29.2 lbs (13.2kg)

6 String Combiner Box

• Input Circuits Breakers: 6
• Circuit Breaker Rating: 10A
• Protection Grade: IP65
• Surge Lightning Protection: Yes
• Size: 10.3*12.6*4.5 inch (260*320*115mm)
• Weight: 10.8 lbs (4.9kg)

100AH Battery

• Rated Capacity(20hr): 100AH
• Battery Cell Type: Lead Acid
• Comes with: 2 sets of cord
• Size: 13*6.9*7.5inch
• Weight: 61.7lbs (28kg)

• Handcrafted in the USA; 25-year output warranty; Best-in-class solar cells; Easiest start to solar
• No installation required; Includes everything you need; Charges most 12-volt batteries, even lithium
• Compatible with Zamp Solar Ready RV ports; Comes with both SAE plug and alligator clips to connect
• Integrated 10-amp digital charge controller protects your battery and lets you monitor your power
• Kit includes: 140-watt foldable panel, 10-amp charge controller, nylon carrying case, 15-foot cable

User questions & answers

Question:	will this work with my current 10-amp furrion solar port
Answer:	Yes. It comes with cables to connect into the solar port
Question:	Does this include the cable needed for solar ready rv’s
Answer:	I can't be sure because I don't have a solar ready RV, but they do have a plug they sell that can be mounted to RV's and wired in to the electrical system. It seems reasonable that this plug is the same in solar ready RV's, it's a common SAE connector.
Question:	Can this be used when Generator is running
Answer:	Technically speaking, the generator and solar would both be connected to the battery bank positive and negative terminals. If it is daytime, the solar charging system has a specific output voltage. It is possible that if you choose to operate a generator at the same time, the controller for the generator output voltage may be different that the solar output. When there is a difference in potential, there is additional current flow from the highest voltage to the lower voltage source. This inter-system current exchange may or may not cause additional problems between controllers. A conservative approach may be to separate the solar system when you choose to operate the generator. That is what choice I make, as I have both systems too.
Question:	Do i need anything else if i already have the zamp hookup and solar installed on my airstream. can i use this for additional charge capabilities
Answer:	This is a complete solar system. It includes the panel, charge controller and wires. The charge controller regulates the power from the solar panels to the battery. Without a good charge controller, it would be too much power and damage the battery by overcharging it. If you have a Zamp sidewall port on your Airstream, all you have to do is remove the battery alligator clips this portable comes with and reveal a 2-pin plug that will go into your solar port on your RV. You can use this to supplement power when charging form other sources or you can use this by itself. It's a powerful unit and should do the job for most typical RV'ers with RV's up to 30-feet or so.

Product features

Off-Grid Solar Panels to Last a Lifetime

Our portable solar kits are the most flexible and efficient solar option. With the largest selection of portable kits on the market, you’re sure to find a solution that works for you.

Made in the USA:

Our panels are handcrafted in Bend, Oregon using the finest materials available (locally sourced whenever possible.) They are built to last 25 years or more and every panel is signed by the person who made it and tested it.

So instead of saving a few bucks now and buying a new solar kit every couple of years, invest once and charge with confidence for the next couple of decades.

Remove From Case and Unfold.

Unzip the bag and pull out the portable panel. Open the clasp and unfold the panels (except for the 45-watt portable, which is a single panel).

Pull out Legs and Set Up the Panel.

Pull out the support legs and set the panel out in direct sunlight. The panel will sit at an angle and should face the sun as directly as possible for maximum efficiency.

Connect the Panel to Your Solar Port or Battery.

Use the included SAE port to plug the kit into a Zamp Solar Ready port, or use the included alligator clamps to connect directly to the battery.

Plug & Play with Zamp Solar Ready Ports:

Most newer RV’s come with a Zamp solar port on their wall or roof. If you have one, you can just plug the panel in with the included SAE cable and start charging!

No port? No Problem!

Use the included alligator clips to attach your portable kit to any kind of 12-volt battery or battery bank (including lithium).

Got a different solar port?

Check out our Furrion adapter.

Includes Everything

Our portable solar kits include everything you need to charge a 12-volt battery or battery bank, including the panel, charge controller, wires, and connectors.

Durable Carrying Case

Every portable comes in a rugged nylon carrying case with thick padding to protect the panel when it’s not in use.

Charge Controller on EZ-View Bracket

A weather-resistant, 5-stage digital charge controller is integrated into the panel to protect your battery and mounted on an EZ-view bracket for convenient monitoring.

Smooth-Slide Support Legs

The support legs on our portable kits open and close smoothly and easily without any weird bolts or wingnuts to cut your fingers on.

Product description

Our company has an experienced professional technical team to help customers solve various solar charging problems, so that we can use pollution-free solar energy. That batteries will slowly leak after being stored for a period of time. And it will consume power for a long time, which will make the battery unchargable. Therefore, we can use our solar charger to charge and maintain the battery.



This product has the following characteristics:



1. Using high-efficiency monocrystalline solar cells, even if the panel is smaller than the traditional model, it still can achieve higher power efficiency.

2. Equipped with a charging controller, it has various protection functions that never cause any damage to the battery.

3. It is convenient to charge as long as there is sunlight to charge the battery.

4. Easy to connect. No need to pull long and complicated extension cords. At the same time it works under human body safety voltage and is very safe.

5. The surface is made of glass and easy to clean.



Reminder:



1. Before connecting the wires, separate the red and black clips to avoid collision and short circuit.

2. This product is a solar charging board which should be installed in a place where the sun is shining directly. The more sunlight, the better the charging effect.



Specification:



Solar Panel Type: Monocrystalline

Maximum Wattage: up to 100 watts

Current at max: 5.3A

Open Circuit Voltage: 22.5V

Operating Voltage: 12V

Size: 41.7*21.3*1.2 inch

Weight: 16.1 lbs



Packing list:



1x solar panel

1x alligator clip

1x waterproof controller

1xSAE cable

4 x Z-shaped solar panel aluminum alloy bracket

8 x long cap bolt with rubber washer

4 x short bolt

4 x nut

4 x spring washer

4 x flat washer

• 【Outstanding Quality】100W solar panel adopts well-built monocrystalline cells with high conversion efficiency up to 24%. Using Tempered glass, weatherproof film and plus aluminum frame for excellent extended outdoor use.
• 【Easy Installation】There are 4 mounting holes on the back. The Z bracket mounts that come with the product can easily install the solar panel on the wall and the roof without any extra maintenance.
• 【Controller】Improved Waterproof Controller, higher charging efficiency, with enhanced reverse connection protection, load overload protection, temperature control and other functions.
• 【Multifunctional】When camping or traveling with family, it can be used in RV, car, boat, camper, jet ski, caravan, water pump, shed, etc.
• 【Warranty】25-year transferable power output; 5-year material and workmanship; 7*24h technical service support.

User questions & answers

Question:	What battery can I use? A 12-volt
Answer:	Keep the solar panel controller and Battery as close as possible then run your 40 feet to the fan motor from the battery. You can keep the solar panel up to 20 feet away from the controller with no problem
Question:	Is the solar panel connection universal
Answer:	No
Question:	Is this charge controller waterproof
Answer:	Turn the USB port on and off also set the voltage at which it will automatically turn off if it goes below a certain voltage that you said like 11 or 12 volts so you don't run the battery down
Question:	Can i hace two 100w panels on this controller
Answer:	The solar panel is used to charge a 12 volt deep cycle battery. The battery is then connected to an inverter power supply that converts 12 volts dc to 120 volts ac. The answer to your question is no it will not power the shed by itself. The more batteries you use the more power you can store. One battery and a 1000 watt inverter should power a light and small power tools.

Product features

Specification

Maximum Power: 100W

Maximum Power Current: 5.3A

Maximum Power Voltage:18.9V

Operating Voltage: 12V

Open Circuit Voltage: 22.5V

Short Circuit Current: 5.7A

Weight: 16.1lb

Dimensions: 41.7*21.3*1.2 inch

Solar Panel Type: Mono-crystalline

High Efficient Cells

Topping mono-crystalline solar cells with high transmission delivered high efficiency for modules. The conversion rate can reach up to 24% under Standard Test Condition.

Junction Box

High sealing junction box. It can effectively block water droplets and water vapor from outside. Even if soaked in water, the internal components will not be any damage.

Waterproof controller

Improved Waterproof Controller, higher charging efficiency, with enhanced reverse connection protection, load overload protection, temperature control and other functions.

Waterproof Structure

Great waterproof performance. Tempered glass brings excellent waterproof protection for the panel. Anodized aluminum frame of good insulation and corrosion resistance let you leave it outdoors for decades without worries.

• The kit includes 50W Polycrystalline Solar Panel, 1 pair of z brackets, 20FT 12Awg Cable, 10A PWM Common Positive Controller
• HQST 50W 12V solar panel is perfect for 12 volt battery charging or multiple panels can be wired in series for 24/48 volt battery charging or for grid-tied applications. Includes connectors to plug into existing HQST solar system. Diodes are pre-installed in junction box and a pair of 1.2in 12AWG cables.
• Pre-drilled holes compatible with ground mounts, Z-brackets, pole mounts and tilt mounts.
• 10A Controller is optimized for a 12V/24V system; Deep Cycle Sealed (AGM), Gel and Flooded battery option ready.
• Controller: Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization). Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.

Product features

HQST Solar Panel

HQST 50W Polycrystalline Kit is designed specifically for customers new to solar. The Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins - providing many benefits, including, but not limited to, quiet power production and grid independence. This solar kit includes a HQST 50W 12V Polycrystalline Solar Panel, a 10A PWM Charge Controller, a 20ft 12AWG cable, and a set of Z-brackets. Start your solar adventure with a HQST Kit.

Waterproof

Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance, Withstand high winds (2400 Pa) and snow loads (5400 Pa). IP65 rated junction box provides complete protection against environmental particles and low pressure water jets.

Easy Installation

Off-Grid Roof top/Ground Mounted. Pre-drilled holes on the back of the panel for fast mounting and securing. RVs, trailers, motorhomes, caravans, boats. 12 volt Battery Charging.

Versatile

Use it for your RV when camping, or during beach trips with the family, either way this polycrystalline panel provides you with the most efficiency per space.

Reliable

Advanced encapsulation material with multi-layered sheet laminations enhance cell performance and provide a long service life. Can be used for many different applications

Product description

195W 18V Solar Panel Specifications



Rated power: 195W

Voc: 21.6V

Vop: 18.0V

Short circuit current (Isc):10.83A

Working current (Iop): 9.02A

Output Tolerance: ±3%

Temperate coefficient of Isc: (0.10+/- 0.01)%/℃

Temperate coefficient of Voc: - (0.38 +/-0.01)%/℃

Temperate coefficient of power Voc: -0.47%/℃

Temperature range: -40℃~+80℃

Frame: Heavy duty aluminum

Kind of glass and its thickness: Low Iron, high transparency tempered glass of 3.2mm

SLA Battery Voltage: 12V

Size: 58.3x26.3x1.4inches

weight 29.2 Lbs

6 String Combiner Box

Input Circuits/Circuit Breakers :6

Circuit Breaker Rating :10A

Max Total DC Output Current :60A

Max Input Voltage Rating:250V

Max Output Voltage Rating:250V

Protection Grade :IP65

Operational Environment Temperature :-30~+70 centigrade

Relative Humidity :0-95%

Cooling Method :Natural Cooling

Surge Lightning Protection:Yes

Dimension:10.3"x12.6"x4.5"

Shipping Weight :11.69lbs

60A LCD Charge Controller

Maximum Charging Current:60A

Maximum Loading Current: 60A

Rated Voltage: 12V/24V

Charging Circuit Voltage: <200mv

Working Tacitly Approved: Charge Off

Temperature Compensation: -4.7mv/cell°C

Environment Temperature: -15°C to +60°C

Waterproof Class: IP22

Deep Cycle battery is main part for solar panel charge system



Specification

Normal Voltage: 12V

Rated Capacity(20hr): 100AH

Constant voltage charge 25℃

Standby use:13.6-13.8v

Cycle use:14.7-15V

Initial current:20A Max

Battery Cell Type: Lead Acid

Battery dimensions: 330mm x 175mm x 190mm (13''*6.9''*7.5'')

Weight: 28kg (61.7lbs)

• 9kwh daily output depends on the sunlight availability. This kit will meet daily basic electric needs, ideal for RV/Boat/Home use
• For charging battery and a backup power, which can provide power for household air conditioning, TV, refrigerator, computer and lighting
• Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa)
• Correct connection order: First connect the 24V battery pack to the 60A charge controller, then connect the PV (solar) array to the combiner box, then connect the combiner box to the controller, lastly connect the inverter to the battery
• Package List:12pcs 195W Solar Panel+ 6 String PV Combiner Box+ 60A Controller+ 4pcs 100Ah Battery+ 3500W 24V-110V Off Grid Inverter+ Solar Cables + Z Bracket

User questions & answers

Question:	What is your warranty
Answer:	Need wire from inverter and controller to battery.
Question:	What else is needed to install this kit , or rather what else is needed to make this kit work besides what you supply
Answer:	I bought a higher end inverter. I wouldn't feel comfortable. It would probably over heat.
Question:	Do you have a larger combiner box? I would like to connect in more panels in the future
Answer:	Hi, the package would be shipped out from the warehouse in CA /NJ.
Question:	Wiring diagram shows a 48V setup
Answer:	100 ah 50 ah if you dont want to discharge your batteries past recommended depth of discharge

Product features

195W Mono Solar Panel

• Rated power: 195W
• Nominal Voltage: 18 Volts
• Maximum/Peak Voltage(Vmp): 21.6V
• Maximum/Peak Current(Imp): 9.02A
• Size: 58.3x26.3x1.4inches
• Weight: 29.2 lbs

6 String Combiner Box

• Input Circuits Breakers: 6
• Circuit Breaker Rating: 10A
• Protection Grade: IP65
• Surge Lightning Protection: Yes
• Size: 10.3*12.6*4.5 inch (260*320*115mm)
• Weight: 10.8 lbs (4.9kg)

3500W 24V-110V Inverter

• Output voltage: 110VAC
• Continuous power: 3500W
• Frequency: 50 / 60Hz
• USB output: 1A 5VDC
• Working input: 24VDC

60A Charge Controller

• Maximum Charging Current: 60A
• Rated Voltage: 12V/24V
• Working Temperature: -35℃--75℃
• Size: 7.72”*3.23”*1.5
• Weight:1 lbs (0.45kg)

100AH Battery

• Rated Capacity(20hr): 100AH
• Battery Cell Type: Lead Acid
• Comes with: 2 sets of cord
• Size: 13*6.9*7.5inch
• Weight: 61.7lbs (28kg)

Solar Cable with Connector

• 12AWG solar cable with connector
• 16ft red cable and 16ft black cable to connect with solar panel

Z Brackets

• Material: stainless steel
• Size about 2.16*1.49*0.78inch
• Fits for solar panels installed on the RV, house, and boat

Customer Questions & Answers

1. Q:Will this kit come with multiple packages?

A: Yes, as this is a large kit, there are several packages, if you don't receive all the items please tell us by email.

2. Q: What's function of Combiner Box?

A:This solar combiner box with high-voltage fuses, over-voltage and over-current protection

3. Q: Where can I buy more Battery?

A: Here is ASIN B07BC7G2JX

4. Q: If I need larger or custom kit what can I do?

A: Please tell us with detail information such as load appliance watt, voltage and working hours by email, we will customize the most suitable kit for you.

• ♣ Basic component for off-grid applications, such as RVs, trailers, boats, sheds, and cabins. Easy to install with Z brackets and pre-drilled holes on the back of panel for fast mounting and securing.
• ♣ Advanced encapsulation material with multilayered sheet laminations to enhance cell performance and provide a long service life.
• ♣ Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa) .
• ♣ By-pass diodes are pre-installed in waterproof IP-65 rated juncton box to minimize power drop caused by shade and ensure excellent performance in low-light environments.
• ♣What included：1pcs solar panel ，1pcs 10A charge controller ，1set Extension cable，1 set Battery connection cable ，4pcs Mounting brackets

User questions & answers

Question:	What size fuse is needed between panels and charge controller if any
Answer:	Just close to the controller current in the solar panel kit.

Product features

cable with alligator clip

• Model: 1*2.5mmNu
• mber of cores: single core multiple strandsTh
• e maximum external diameter of the wire: 5.3 ± 0.2 (mm)No
• minal cross section: 2.5 (mm)Us
• es: Photovoltaic power generationCo
• re material: tinned copper wirePr
• oduct Certification: TUVVo
• ltage rating: 0.6/1KVRa
• ted voltage: 1000Vle
• ngth：3M

Extension cable with PV connector

• Model: 1*2.5mm
• Number of cores: single core multiple strands
• The maximum external diameter of the wire: 5.3 ± 0.2 (mm)
• Nominal cross section: 2.5 (mm)
• Uses: Photovoltaic power generation
• Core material: tinned copper wire
• Product Certification: TUV
• Voltage rating: 0.6/1KV
• Rated voltage: 1000V
• length：3M

Z-type Aluminum Mounting Bracket

• The z-type aluminum bracket is composed of four z-type aluminum brackets, supporting fasteners and self-tapping screws.
• Material: aluminum alloy
• Fastener: stainless steel SUS304

Product description

Weize 100 Watt 12 Volt Monocrystalline Solar Panel is perfect for any off-grid application.

Spefication:

Maximum Power: 100W (may not always 100 watt output, which depends on the sunshine)

Maximum Power Voltage (Vmp): 18.78V

Maximum Power Current (Imp): 5.32A

Maximum System Voltage: 1000V DC

Open-Circuit Voltage (Voc): 22.64V

Short-Circuit Current (Isc): 5.7A

Dimensions: 39.6 x 26.3 x 1.4 inch

Panel Weight: 15.8 lbs



Parcel included:

1 x Solar Panel

1 x 10A Charger Controller

1 Pair 20ft Extension Wires

1 Set Mounting Z Brackets



What is needed to get a solar system work? tips below may help you:

- Solar Panel(s), connecting more by series or parallel to get 12v, 24v or even bigger voltage, for your 12v, 24v, 36v... battery.

- Charger Controller, a 10A charger controller is ok for a 12V 100W Solar System; if 200W or Bigger, then 20A or 30A controller.

- Connecting Cables, you need the wires to connect the solar panel, charger controller, battery together.

- Mounting Bracket, you may need them to install the panel in the place with ful sunshine.

- Power Inverter, if you need this to power your AC devices, you still need a power converter to convert the DC to AC power.

• High Efficiency: WEIZE solar panel constructed with high-performance Monocrystalline solar cells that offer higher efficiency up to 21% than Polycrystalline in bright weather conditions, it provides a long service life and is virtually maintenance free.
• Durable: The anodized aluminum frames, tempered glass and sealed junction box make the solar panel corrosion-resistant and weatherproof for superior outdoor performance.
• Versatile: The industrial-standard solar panel features 36.4" x 26.8" x 1.2" size, 2.6ft cable with connectors, generates 5.3 amp power, charges 12 volt battery, ideal for RV's, cabins, sheds, remote locations and other small power generation needs.
• Installation Ready: Equipped with all necessary accessories that include: 1*10A charger controller(Larger Amps controller is needed when more panels are connected), 1 pair 20ft extension cables, 1 pair of 8ft battery tray cable, 1 set mount brackets and screws (Battery and inverter are NOT included).
• Warranty: The monocrystalline solar panel aims for quality followed up with quality customer service directly provided by manufacturer. A satisfied solution will be given for ANY of your problems. Our support team is on standby for YOU.

User questions & answers

Question:	I need help configuring a run of 40ft from my solar panels to my greenhouse to run air circulating fans. Do I keep the controller and battery close
Answer:	Yes,This solar charger controller compatible with sunforce solar charger and maitainer.
Question:	Do I need blocking diodes
Answer:	No, this 7A solar charge controller regulator is not waterproof. Please place the solar charge regulator at a cool and ventilated place. Avoid contact with water.
Question:	What does the set button do on the controller
Answer:	This sunway solar 7A solar charge controller regulator, the Solar Power Input is 100W Maximum,Max. input Voltage:22 VDC. If the power is lower than 100W, and the solar panel cable connecoters are the same as this one, then, the solar panel can work with this solar controller.
Question:	Will this power a small shed with light and small power tools
Answer:	Yes, this 7A solar charge controller protects 12V battery from being over charged and over discharged.

Product features

What is Needed for a Solar System:

- Solar Panel(s), connecting more by series or parallel to get 12v, 24v or 200w 300w...etc;

- Charger Controller, voltage & current regulator keeping your battery from overcharging.

- Connecting Cables, put the solar panel, charger controller, battery together;

- Mounting Brackets, you may need them to install the panel in full sunshine place.

- Power Inverter (optional), convert the DC to AC power for AC devices.

Perfect Design

MC4 cable, overall length 19 inch;

Pre-drille holes, easy for installation;

IP65 rated waterproof junction box.

Good Quality

Advanced material with multi-layered sheet;

Aluminum frame, anti corrosion;

Durable low-iron tempered glass;

High Efficiency

High module conversion efficiency 21%

39.6*26.3*1.4 inch, with Max. 100W;

About produce 300-600Wh / Day.

• Solar panel kits, including 20 watts solar panel, 12V/24V solar charger regulator controller and two 6.5ft cable with Alligator Clips and O-ring Terminal for battery charging connection, easy to fix and install.
• Widely applied to off grid 12 Volt battery charging system and a variety of DC applications, including caravan, RV, car, boat, green house, marine, dry camping, garden watering, shed, cabin, gate opener, etc.
• Small in size and light to take, it is easy to carry for camping or other outdoor activities. Easy to install with pre-drilled holes on the back of panels for fast mounting and securing. 35 inches 18 awg solar cable attach to the junction box, reddis brown is the positive, blue is negative.
• Built with strong tempered glass and aluminum frame, 25 years transferable output and high quality material and workmanship for long lasting use.
• Waterproof Junction Box: Advanced water and dust proof level (complete protection against environmental particles and low pressure water jets).

User questions & answers

Question:	Ok should the controller flash when hooked up to my car battery all the time which is the - then battery both flash is that normal
Answer:	The weak point in this system is the controller. I would unhook it and put it in the round file, order a Zamp controller and install it. You will get better readings on your daily collection of amps, battery voltage, and you can use it with LA, LiPo and AGM batteries by choosing the internal settings. No it shouldn't flash, I set mine on a shelf as an emergency back up and installed a Zamp 10 Amp. More expensive, but more quality and more amps to your battery.
Question:	gauge seems small for the wiring; will it heat up under load
Answer:	It is really meant for smaller items such as cell phones or a radio Or light . Remember, the panel is giving power to the device, not the other way around. The wires are designed to handle the sun power
Question:	Is the controller water proof
Answer:	hello, the solar panel is waterproof, but the controller is not.
Question:	Is this monocrystalline or amorphous
Answer:	High efficiency monocrystalline solar cells

Product features

20W Monocrystalline Solar Panel kits

Specification

1. Maximum Power: 20W
2. Maximum System Voltage: 1000V DC
3. Optimum Operating Voltage (Vmp): 18V
4. Optimum Operating Current (Imp): 1.11A
5. Weight: 4.8lbs
6. Dimensions: 18.9 x 13.4 x 0.7 inch

20 Watt Monocrystalline Solar Panel

IP65 Rated waterproof junction box, mounting holes ready.

High efficiency monocrystalline cells

12V battery use, high quality glasses, small in size and easy to take.

Outstanding electrical performance

Has the capability of withstanding heavy snow and strong wind loads.

10A Charge Controller Features

• 10A solar charge controller only suitable for lead acid batteries. OPEN, AGM, GEL and Seal, not for nickel hydride, lithium, Liions, or other batteries.
• For protecting the lifespan of your battery, once the voltage of the battery drop below 9V, the solar controller will turn off automatically.
• Only suitable for small home solar system, easy to install and operate.
• Tips: Always connect the battery before connect the solar panel, disconnect in reverse order.

Features

• Easy operation interface
• Short-circuit protection
• Battery reverse discharge protection
• Battery reverse polarity protection
• open-circuit protection
• Overload protection

Specification

• Rated discharge Current: 10A.
• Battery Voltage: 12V/24V auto.
• Two USB output Voltage: 5V/2.5A.
• PWM charging mode.
• LCD screen display.

Max input

• Max solar input:
• 12V battery, the highest 23V.
• 24V battery when the highest 46V.
• Max input power:
• 100W /12V system. 200W/24V system.

Product description

If you're looking for a convenient and portable power solution, the Renogy 100W Monocrystaline Foldable Solar Suitcase is an ideal choice. The Renogy 100 Watt 12 Volt Monocrystalline Portable Solar Suitcase is an entire solar power system incorporated into one small package. Weighing in at about 26.60 lbs., this lightweight suitcase includes two 50 Watt Monocrystalline Solar Panels, one 20 Amp waterproof Voyager Charge Controller with an LCD Screen for power regulation, one 10ft tray cable with alligator clips for easy connection to the battery, and a protective casing for safe portability. The Renogy 100 Watt Solar Suitcase will make charging on the go as easy as 1-2-3! If you have any questions regarding this product, please call us at 1 (800) 330-8678 or email [email protected] Efficiency : 21.0%

• Adjustable, Corrosion-Resistant aluminum stand as well as a heavy duty handle and latches for longevity. Folded size: 19. 9 x 27. 2 x 2. 8 inches. Ideal output: 500 Watt hours per day (depends on sunlight availability)
• Compatible with gel, sealed, Lithium, and flooded batteries. Charge controller with LCD display for displaying operating Information and data
• 20A built-in 5-stage Solar charge controller provides overcharge protection, reducing Fire risk.Operating Temperature: -40°F to +185°F
• Negative-ground charge controller for compatibility with your RV, boat, trailer, etc.
• The low-voltage system avoids electric shock hazards

User questions & answers

Question:	My house battery is too hard to get to for alligator clips. What would I need to hard wire this system to my battery
Answer:	I got this extension cable: https://www.amazon.com/Go-Power-GP-PSK-X30-Expansion-Accessory/dp/B00FYV4DU8 And I got this accessory: https://www.amazon.com/Go-Power-Trailer-Accessory-Portable/dp/B00FYUCQXK, to which I added the appropriate quick-connector. The 30’ cable coils up inside the back of one panel when folded, I keep the 7-way hookup accessory in a little bag with other accessories. I simply set up the panel somewhere within 30’ of the front of my trailer and plug it into the 7-way coming from the trailer. Works like a dream to keep my LiFePO4 battery charged up, even on less than perfectly sunny days! No need to alligator-clip it to battery under the couch in my trailer. I did get a charge controller from Zamp Solar, because Renogy’s did not support lithium batteries at the time.
Question:	Can i add more pannesls
Answer:	I assume you are asking if the included charge controller can manage additional panels? If you are looking to add panels in parallel (maintaining the nominal 12V output while increasing amperage), my answer would be, "not recommended." This controller is rated at 10 amps. At full 100 watt output, it is operating at around 7 amps, so there's not much additional capacity. If you plan to add panels, I would suggest ordering the kit without the controller, then add a higher capacity controller such as this 30 amp model...http://www.amazon.com/RENOGY%C2%AE-ViewStar-Negative-grounded-Controller/dp/B00LG0DAQO/ref=sr_1_2?s=lawn-garden&ie=UTF8&qid=1428654662&sr=1-2&keywords=viewstar It will require some know-how and additional wiring to properly set up.
Question:	Anybody know how long you can run the batter/power cable...? I'm thinking from the top of an RV to the ground +/- 12-15'. Thank you in advance
Answer:	With 10AWG wire between your controller and battery, 30' of wire will give you 3% drop. Only 15' of wire could be used if you add a panel and have 200W of PV power. That's not the best practice though. Best would be to use an MPPT controller connected as close to the battery as possible. You would then be able to use 55' of 10 guage wire between the controller and panel, or 110' if you double your voltage by adding another 100 watt panel in series.
Question:	What is a good extension cord to buy with this for more mobility from my RV
Answer:	There is a lot of wrong and misleading info you're getting here... It primarily depends on your controller. If you have a garbage (PWM) controller, then 25' of 10AWG wire is your max. That puts you at 3% voltage drop. If you have an MPPT controller, you can go 55' with 10AWG wire. Now, here's the kicker, and the reason nobody should be buying these crappy PWM controllers; If you add another 100W panel in series to your MPPT controller, you can now use 110 feet of wire, and your voltage drop will still be 3% because you're doubling your voltage. If you add a panel to a PWM controller, you'll have to cut your wire length in half. DO NOT BUY PWM controllers!!!

Product features

Solar Suitcase

The Renogy 100 Watt 12 Volt Monocrystalline Portable Solar Suitcase is an entire solar power system incorporated into one small package. This suitcase includes two fully waterproof(IP66) 50 Watt Monocrystalline Solar Panels, one 20 Amp waterproof Voyager Charge Controller, one tray cable with alligator clips for easy connection to the battery, and a protective casing for safe portability.

The negative-ground charge controller is compatible with RV, boat, trailer, etc.

Package Includes

• Composed with two 50 Watt Monocrystalline Solar Panels. The low-voltage system avoids electrical shock hazards.

• Adjustable, corrosion-resistant aluminum stand.

• Heavy duty handle and latches for longevity protective casing.

Package Includes

• 12V/ 24V Battery compatibility with auto recognition
• Smart 4 stage PWM charge Controller: bulk, Absorption. Float, and equalization.
• 4 Battery Type compatible – sealed/AGM, gel, Flooded, and lithium batteries (with Lithium awakening feature)
• Watertight design with backlit LCD display for system information and error codes.
• Multiple Protection features for battery, controller, and Solar panels (including reverse polarity and more)

Package Includes

MC4 to Alligator Clips w/ Fuse

Used for connecting the charge controller to the battery.

The entire cable from the charge controller to the alligator clips measures 9.9 feet with an inline fuse of 10A.

• TP-solar 100W solar panel kits ideal for 12v battery charging, designed for RVs, cabins, homes, boats, caravan s, back-up and remote power use.
• This kits include 4pcs Z mounting brackets and 1 pair 16ft Red and Black Solar Cable makes it easy to set up. Easy to install with pre-drilled holes on the back of panel for fast mounting and securing.
• With the 20A charge controller with PWM funtion and LCD display , it can prevent the battery from over charge, over voltage, discharge and short circuit, reversed polarity protection, battery is fully protected. You can expand your system up to a maximum of 400W 12V system or 800W 24V system.
• Dimensions: 1160*510*35mm (45.6*20*1.37 inch). Weight: 15.84 lbs. Voltage at Pmax (Vmp):23V. Current at Pmax (Imp): 4.3A.
• Withstand high winds (2400Pa) and snow loads (5400Pa), strong tempered glass and aluminum frame for extended outdoor use, allowing the solar panel to last for decades.

User questions & answers

Question:	Does this kit come with the standard 2 pin RV plug
Answer:	This 100W solar panel kit has the cable with the MC4 connector, there is no 2 pin RV plug.
Question:	Is this kit complete, do I need to purchase anything else
Answer:	Hello, this solar panel kit comes with a solar charge controller, 16ft Red and Black Solar Cable with MC4 Connector and the Z mounting Bracket. If you want to finish the installation, you may need extra solar cable. It all depends how far is the solar panel away from your battery.
Question:	What type of wire if I want to add extra cable
Answer:	10 AWG or 12 AWG solar cable would be OK.
Question:	I am looking for something that would power a lamp, heater, or fan, will this work
Answer:	This solar panel works for charging a 12V battery, if you want to run a lamp, heater or fan, you may need a battery, you also need a off grid inverter if run 110V appliance.

Product features

100 Watt 12 Volt monocrystalline solar panel

1. 100W mono solar panel, with waterproof IP-67 rated junction box:
2. Advanced water and dust proof level (complete protection against environmental particles and low pressure water jets).

Specifications

• Nominal voltage (Vmp) 23V
• Nominal current (Imp) 4.3A
• Open-circuit voltage (Voc) 27V
• Short-circuit current (Isc) 4.5A
• Cell efficiency 19.5%

High-efficiency solar cells

• Constructed by monocrystalline solar cell.
• High module conversion efficiency.
• Excellent performance in low-light environments.

Build to last for Decades

• Withstand high winds (2400Pa) and snow loads (5400Pa).
• Strong tempered glass and aluminum frame for extended outdoor use.
• Allowing the panels to last for decades.

PWM intelligent charge controller.

• Rated discharge Current: 20A.
• Battery Voltage: 12V/24V auto.
• PWM charging mode.

Reliable

Corrosion-resistant aluminum frame allows extended outdoor use; the panels can last for decades

Durable

Mounting hole ready, make it easy to mount with brackets.

Versatile

Can be used for many different applications

• Portable & Foldable :It is a ready-to-use plug and play portable solar briefcase. Pre-installed controller and Pre-wired battery clips for charging 12V battery. With handle, convenient to carry.
• Easy Operation: open up the folding solar panel, battery clips allow for simple connection to the battery. Aluminium stand quickly starts to generate more energy and you can use this solar suitcase to power up any 12V DC devices
• Wide Application: Ideal for hiking, camping, and military use, off-grid solar panel system, caravan, RV, boat, Green house solar panel system, solar pump watering system etc.
• Controller Protection: Pre-installed solar charge controller protects the system from over-charge, over-discharge, over-load, and reverse-connection
• Package includes: 1pc 120W Foldable Mono Solar Panel Kit ( 2pcs 60W Mono Solar Panel & 1pc pre-installed 20A charge controller & 1 pair pre-installed 10ft solar cables with 1 pair 30A alligator clips & 1 set adjustable aluminium stand, handle and latches)

User questions & answers

Question:	Can someone post how many different type 12v deep cycle batteries the pwm controller supports? for ex li-ion, gel type, wet cell, dry cell agm type
Answer:	Dear friend, this unit has a built-in lithium battery, which cannot be replaced by users, but the built-in lithium battery has a long life span and the charging cycle exceeds 3000 times (12 years)
Question:	Is this charge controlled considered a smart-charger like a battery tender, to prevent battery cooking
Answer:	I wouldn't know why you would want to leave it plugged into the wall all the time. I can charge mine and use it over a 3-day's.then when it gets down to one green light I set the solar panel in sun or plug it in the wall and charge it in a day. So if you leave it plugged into the wall AC and use it while it's plugged in yes I would assume the battery would die twice as fast.
Question:	Is there a protective case available for this panel
Answer:	This doesnt have an outlet on it, just a USB and the ports for the lights that come with it. You'll likely need something much stronger with an outlet on it unless you have a USB low-power heater.
Question:	Is the alligaror clips interchangable with other connections
Answer:	perfec

Product features

ECO-WORTHY 120 Watt 12 Volt Foldable Mono Solar Panel Kit

Max Power at STC: 120W

Open circuit voltage (Voc): 21.6V

Short circuit current (Isc): 6.66A

Optimum operating voltage (Vmp) : 17.8 V

Optimum operating current (Imp) : 7.32A

Output Tolerance: ±3%

Solar cell materials: Monocrystalline

Frame and leg: Heavy duty aluminum

Kind of glass and thickness: Low Iron, high transparency tempered glass of 3.2mm

Folding Dimensions: 31*20*2.8in (790*510*70mm)

Reliable

Durable

Safe

High efficiency

• Handcrafted in the USA; 25-year output warranty; Best-in-class solar cells; Easiest start to solar
• No installation required; Includes everything you need; Charges most 12-volt batteries, even lithium
• Compatible with Zamp Solar Ready RV ports; Comes with both SAE plug and alligator clips to connect
• Integrated 15-amp digital charge controller protects your battery and lets you monitor your power
• Kit includes: 180-watt foldable panel, 15-amp charge controller, nylon carrying case, 15-foot cable

User questions & answers

Question:	description says 140 watts but model USP1003 should be 180 watts - which is correct
Answer:	The product is a 180 watt solar panel. I ordered and received the 180 watt suitcase and it works as advertised. I saw the same description mistake but saw a post by another person verifying that the model number was correct and it was in fact the 180 watt suitcase.
Question:	Does the controller have a lithium setting
Answer:	Yes, it has settings for wet cell lead, AGM & lithium. Very easy to set for the appropriate battery type.
Question:	Would this work for a mobile home in a mobile home park
Answer:	If you utilize 12-volt batteries than yes.
Question:	Will this work for 2x 6 volt batteries
Answer:	Yes I’m charging two 12s It automatically adjust to 6 V when you hook it up.

Product features

Off-Grid Solar Panels to Last a Lifetime

Our portable solar kits are the most flexible and efficient solar option. With the largest selection of portable kits on the market, you’re sure to find a solution that works for you.

Made in the USA:

Our panels are handcrafted in Bend, Oregon using the finest materials available (locally sourced whenever possible.) They are built to last 25 years or more and every panel is signed by the person who made it and tested it.

So instead of saving a few bucks now and buying a new solar kit every couple of years, invest once and charge with confidence for the next couple of decades.

Remove From Case and Unfold.

Unzip the bag and pull out the portable panel. Open the clasp and unfold the panels (except for the 45-watt portable, which is a single panel).

Pull out Legs and Set Up the Panel.

Pull out the support legs and set the panel out in direct sunlight. The panel will sit at an angle and should face the sun as directly as possible for maximum efficiency.

Connect the Panel to Your Solar Port or Battery.

Use the included SAE port to plug the kit into a Zamp Solar Ready port, or use the included alligator clamps to connect directly to the battery.

Plug & Play with Zamp Solar Ready Ports:

Most newer RV’s come with a Zamp solar port on their wall or roof. If you have one, you can just plug the panel in with the included SAE cable and start charging!

No port? No Problem!

Use the included alligator clips to attach your portable kit to any kind of 12-volt battery or battery bank (including lithium).

Got a different solar port?

Check out our Furrion adapter.

Includes Everything

Our portable solar kits include everything you need to charge a 12-volt battery or battery bank, including the panel, charge controller, wires, and connectors.

Durable Carrying Case

Every portable comes in a rugged nylon carrying case with thick padding to protect the panel when it’s not in use.

Charge Controller on EZ-View Bracket

A weather-resistant, 5-stage digital charge controller is integrated into the panel to protect your battery and mounted on an EZ-view bracket for convenient monitoring.

Smooth-Slide Support Legs

The support legs on our portable kits open and close smoothly and easily without any weird bolts or wingnuts to cut your fingers on.