13 best morning star charge controllers
Morningstar is a well-known manufacturer of solar charge controllers, which are crucial components in off-grid solar power systems. These controllers regulate the charging and discharging of batteries in solar power setups, ensuring efficient energy management. Here are key points related to Morningstar charge controllers:
Charge Control Functionality: Morningstar charge controllers primarily serve to manage the flow of electrical energy between solar panels and batteries. They prevent overcharging by regulating the voltage and current coming from the solar panels to the batteries.
Types of Charge Controllers: Morningstar produces various types of charge controllers, including PWM (Pulse Width Modulation) and MPPT (Maximum Power Point Tracking). PWM controllers are cost-effective and suitable for smaller systems, while MPPT controllers are more efficient and suited for larger solar installations.
PWM (Pulse Width Modulation) Controllers: These controllers work by rapidly switching the solar panel voltage on and off.While PWM controllers are generally less efficient than MPPT controllers, they are reliable and cost-effective for smaller solar systems.
MPPT (Maximum Power Point Tracking) Controllers: Morningstar's MPPT controllers are designed to optimize the power output from solar panels. They adjust the electrical operating point of the modules, ensuring that the system extracts the maximum available power.
Reliability and Durability: Morningstar is recognized for producing high-quality, reliable charge controllers. Their controllers often feature robust designs to withstand various environmental conditions, making them suitable for outdoor use in solar power installations.
Battery Protection: Charge controllers play a crucial role in protecting batteries from overcharging, which can significantly extend the life of the batteries in a solar power system. Morningstar controllers typically include features such as temperature compensation and low voltage disconnect to enhance battery protection.
User-Friendly Features: Morningstar charge controllers often come with user-friendly features such as LED indicators for status monitoring, intuitive interfaces, and sometimes the ability to connect to remote monitoring systems for more advanced users.
Compatibility: Morningstar charge controllers are designed to work seamlessly with different types of batteries, including lead-acid, gel, and lithium-ion batteries. This versatility makes them suitable for a wide range of solar power applications.
In summary, Morningstar charge controllers are essential components in solar power systems, providing efficient and reliable control of the charging process to ensure the longevity and optimal performance of batteries in off-grid and grid-tied solar installations.
Below you can find our editor's choice of the best morning star charge controllers on the market
Morningstar Tristar Charge Controller | World Leading Solar Controllers & Inverters
Morningstar Corporation
Product description
Morningstar’s TriStar MPPT solar controller with TrakStar Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers.
The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely fast sweeping of the entire I-V curve. This product is the first PV controller to include on-board Ethernet for a fully web-enabled interface and includes up to 200 days of data logging.
- Maximizes Energy Harvest Our TrakStar MPPT Technology features: Better peak power point tracking than other MPPT controllers Very fast sweeping of the entire I-V curve Recognition of multiple power points during shading or mixed PV arrays Excellent performance at sunrise and low solar insolation levels
- Extremely High Reliability Robust thermal design and no cooling fans Parallel circuit design provides less stress and longer life for electronic components No mechanical relays Extensive electronic protections including PV short circuit protection Epoxy encapsulated inductors and conformally coated printed circuit boards
- Very High Efficiency Peak efficiency of 99% Proprietary tracking algorithm minimizes power losses Low self-consumption Continuous operation at full power to 45°C without need to de-rate Selected electronic devices with higher ratings to minimize losses from heating
- Extensive Networking and Communications Capabilities Enables system monitoring, data logging and adjustability. Uses open standard MODBUS protocol and Morningstar’s MS View software. Meterbus: communications between compatible Morningstar products Serial RS-232: connection to a personal computer EIA-485: communications between multiple devices on a bus Ethernet: fully web-enabled interface to a local network or internet; view from a web browser or send email/text messages
- Metering and Data Logging Optional TriStar meter and remote meter provides detailed operating data, alarms and faults Three LED’s display system status Up to 200 days of data logging via meters or communications ports
User questions & answers
| Question: | Can this be used to charge lipo battery bank . I need to set the bulk and float at 14 volts |
| Answer: | Morningstar controllers are manufactured in a fully automated world-class ISO 9001 facility in Taiwan. |
| Question: | Can this be program battery type without a meter/screen |
| Answer: | I am using a 100watt panel made by Global ICP. Is your panel 12volt output? It must be for this charger. The actual output will be higher but not over 24, which is the next stage up. My panel puts out 19.5 volts directly. If you have a muilti meter, check the output voltage if you do not know.Best to look around and get a book on solar. Plenty available. Learning first will help prevent mishaps or damage to your expensive equipment. |
| Question: | Will this control work with reliable 4000w solar power inverter 12vdc to 120v ac off grid pure sine wave inverter with 5-160 watt panels (800w total |
| Answer: | Well its a 10 amp controller at 12 volts so if you use ohms law, Volts Times Amps, says about 120 Watts. I have got 2 60 watt panels connected to mine and it works fine. |
| Question: | What is the difference beween this controller and the $541 morningstar ts-mppt |
| Answer: | I'm afraid several have misunderstood the question. Without a low-voltage disconnect, the load connections on the controller are provided merely for connection convenience. It should be the same as connecting your load directly to the battery. There is no low-voltage protection either way. Unless you purchase the unit that contains the LVD |
Morningstar - ProStar 30A PWM Solar Charge Controller for 12V/24V Batteries, Lowest Fail Rate in The Industry, Built-in Diagnostics, (PS-30)
Morningstar Corporation
Product description
Morningstar, ProStar Charge Controller, 30A, 12/24VDC, PS-30
- SYSTEM COMPATIBILITY: Designed for use in mid-sized systems. Max solar/load current: up to 30A (depending on model; see model comparison chart). Low voltage disconnect included. Constant voltage PWM regulation; 4-stage charging
- UNIQUE FEATURES: Load and automatic PV-based lighting control. Charges all battery types including Lithium Ion; has Lithium “fold back” circuitry for safe charging under low temperature conditions. Ideal for use in cloud-connected, networked systems through communications protocols—“speaks” Modbus, and SNMP (with optional EMC-1)
- OVER 20 YEARS OF RELIABILITY : Proven in over two decades of use—and continuously improving with the latest Generation III version. “Own both the latest and the legend in a single controller”
- EXTENSIVE PROTECTION AND DIAGNOSTICS BUILT-IN: Built-in extensive electronic protection against surge, short-circuit, over-current, reverse polarity conditions. Advanced self-diagnostics warns against installation or user errors. Custom programmability, with or without a PC. Data logging- up to 256 days worth
- LOWEST HARDWARE FAILURE RATE IN THE INDUSTRY, BACKED BY A FIVE-YEAR WARRANTY: Most Morningstar products ever built are still in use, some for over 25 years, thanks to smarter digital design, superior internal engineering, and over-spec components. Advanced thermal engineering eliminates cooling fans which can fail, suck in dirt, shorten component life and waste precious energy. The high-impact, durable polycarbonate exterior case illustrates industrial-strength build quality.
User questions & answers
| Question: | Can I add a 12v 10amp charger to my load? Should I connect it to the solar terminal, the battery or load |
| Answer: | You can charge 12, 24, 48 volt battery banks with this charge controller. Refer to the manual for the dip switch settings. The voltage of your panels does not matter when configuring your array. What matters is either the aggregate amperage or Volts over circuit (Voc). This depends on whether you have your panels connected in series or parallel (pos to neg or pos to pos and neg to neg). For example: for an array in series you connect pos to neg and add the Voc until you have a string under the limit of the charge controller. In parallel you connect pos to pos and neg to neg and add the max rated amps per panel until you get a string under the limit. Refer to the label on your panel to calculate your Voc or amps. Use the Maximum amperage setting to add your amps together to make sure that you stay under the limit. The max amps is based on the max amount of amperage produced per panel on a perfectly sunny, cold day (Heat effects efficiency of the panel). I'm running a combination of parallel/series strings on two charge controllers in parallel (yes you can put your controllers in parallel also, this just means you have two controllers connected to your battery bank. Make sure they have the same dip switches set.). I have panels with 44 Voc and 5 amps. The most panels I can run per charge controller are 2 strings of 3 series parallel. Hope this helps. |
| Question: | Is this a photo of a different model? Your description says that the item for sale has an lcd monitor on it. Thanks for all your help, guys |
| Answer: | Yes that is fine as long as you don't put more than 150VDC into each controller. Thanks, ML SOLAR |
| Question: | Does it provide a trickle charge |
| Answer: | Maybe... An appropriately sized power supply that has an AC input (from grid or genny), with a DC output (to charge controller) could be used instead of solar panels, so long as the power supply is within the operating parameters of the charge controller (50V to 150V) DC. |
| Question: | Made in |
| Answer: | Yes that is no problem. Thanks ML SOLAR |
Morningstar - SunSaver 10A PWM Solar Charge Controller for 12V Batteries, Lowest Fail Rate in The Industry, Built-in Diagnostics, (SS-10-12V)
Morningstar Corporation
Product description
The world’s leading small solar controller for industrial and consumer markets. Proven in demanding locations, including mines and oilfields. • Ideal for oil/gas applications. Approved for use in hazardous locations: Class 1, Division 2, Groups A-D. • Longer battery life through PWM 4-stage charging and temperature compensation. Sealed or flooded battery select. • Tropicalization - hardened for field use with anodized aluminum enclosure, epoxy encapsulation, marine-rated terminals. • Additional features include full electronic protections, 3-state battery LED indicators, terminal cover, dead battery recovery, high voltage load protection for sensitive loads. • L-versions include low-voltage load disconnect.
- SYSTEM COMPATIBILITY: Designed for use in smaller systems. Max solar/load current: up to 20A (depending on model; see model comparison chart). Low voltage disconnect included (L models). Constant voltage PWM regulation; 4-stage charging
- UNIQUE FEATURES: Ideal for use in cloud-connected, networked systems through communications protocols—“speaks” Modbus, and SNMP (with optional EMC-1). Tropicalized and hardened for field use with epoxy encapsulation, marine rated terminals. Includes wire terminal cover
- RATED FOR USE IN HAZARDOUS LOCATIONS: meets UL/CSA requirements for Class 1, Division 2, Groups A-D for oil & gas and other critical environment applications. T5 temperature rating for up to 100⁰C/212⁰ F (boiling water)
- EXTENSIVE PROTECTION AND DIAGNOSTICS BUILT-IN: Built-in extensive electronic protection against surge, short-circuit, over-current, reverse polarity conditions. Advanced self-diagnostics warns against installation or user errors. Factory pre-sets mean no required installation settings
- LOWEST HARDWARE FAILURE RATE IN THE INDUSTRY, BACKED BY A FIVE-YEAR WARRANTY: Most Morningstar products ever built are still in use, some for over 25 years, thanks to smarter digital design, superior internal engineering, and over-spec components. Advanced thermal engineering eliminates cooling fans which can fail, suck in dirt, shorten component life and waste precious energy. The high-impact, durable polycarbonate exterior case illustrates industrial-strength build quality.
User questions & answers
| Question: | Made in |
| Answer: | This controller stopped working after 2 months with 40w panel. I replaced it with a $7 unit that looked very similar that I found on ebay.Does not have Delphi connectors, which I consider a useless expense. |
| Question: | I'm a novice. How would this item be used in conjunction with an ALEKO® 90W 90-Watt Monocrystalline Solar Panel? Thanks |
| Answer: | In my application I put a fuse between the BATTERY and the load, not between the panel and the controller. Solar panels are limited in their current output and will generally not be damaged by a short circuit, but a battery can output a very high current level if shorted. |
| Question: | What's the maximum size panel I can use with this controller |
| Answer: | As long as your dual batteries are wired to produce 12 volts, the controller will work. The controller is only rated to handle 4.5 amps from the solar panel, so you are limited in the size of the panel you can use. My SG-4 has worked well with a 50 watt panel for over a year maintaining the 12 volt battery in a pop-up camper used in Colorado mountains. |
| Question: | Do I need to run my load through the controller, or can it go directly to battery? What are the advantages of running through the controller |
| Answer: | Do you have a lithium cell? or a Lithium Battery?(a battery is two or more cells)the difference is important. To get 12v equivalent, you need multiple lithium cells.This could work with four (4ea) lithium CELLS, specifically lithium-iron-phosphate cells(for instance), which have a nominal voltage around 3.6v, which you would need to balance well before-hand; this is assuming you are not loading heavily or discharging to a low SOC. (4ea cells x 3.6v)=14.4v, considered fully-charged for sla. So you would connect your four cells (each beginning at |
Morningstar - Tristar 60A MPPT Solar Charge Controller for 12V/24V/48V Batteries, Lowest Fail Rate in The Industry, Built-in Diagnostics, RTS Included, (TS-MPPT-60)
Morningstar Corporation
Product description
Morningstar’s TriStar MPPT solar controller with TrakStar Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW.
- SYSTEM COMPATIBILITY: Designed for use in larger systems. Parallel scalability of chargers and load controllers for large, hybrid systems. Max Battery Current: up to 60A (depending on model; see model comparison chart). Max. PV Open Circuit Voltage (Voc) 150V(without damage to unit)
- UNIQUE FEATURES: Highest peak efficiency for off-grid controllers. Ideal for use in cloud-connected, networked systems through communications protocols—“speaks” Modbus, and SNMP (with optional EMC-1). Built-in meter on TS MPPT 60M; available option on other models (order TS-M-2). Remote meter option (order TS-RM-2)
- TRAKSTAR MPPT TECHNOLOGY MAXIMIZES ENERGY HARVEST AND LOWERS OVERALL SYSTEM COST: 98% Peak Efficiency. Excellent performance at sunrise and low or variable solar insulation levels. Decreases the number of solar modules needed based on the extra energy harvest.
- EXTENSIVE PROTECTION AND DIAGNOSTICS BUILT-IN: Built-in extensive electronic protection against surge, short-circuit, over-current, reverse polarity conditions. Advanced self-diagnostics warns against installation or user errors. Custom programmability, with or without a PC. Data logging- up to 256 days worth
- LOWEST HARDWARE FAILURE RATE IN THE INDUSTRY, BACKED BY A FIVE-YEAR WARRANTY: Most Morningstar products ever built are still in use, some for over 25 years, thanks to smarter digital design, superior internal engineering, and over-spec components. Advanced thermal engineering eliminates cooling fans which can fail, suck in dirt, shorten component life and waste precious solar electricity. Industrial-strength build quality inside and out, right to the controller’s steel exterior casing
User questions & answers
| Question: | can I use a 24 volt panel to charge a 12 volt system |
| Answer: | No the display is not back lit but is very legible. |
| Question: | An I use 2 of these to charge 12 155a hr. batteries with 11 solar panels in 24v system |
| Answer: | Yes. |
| Question: | Can I use this unit to charge my four 225 Ah batteries with grid power or when thats down my 5 KW jenny, no panels for now just battery charging |
| Answer: | I thought I had seen a recommended input wattage but I didn't retrieve it. But, the idea of the controller is to limit the charge to protect the battery and keep things safe. The rated wattage, eg: mine is 30amps, has to do with the load side. I have 5 100w panels feeding the controller. They are not aimed ideally and typically I currently only see a charge voltage of between 6 and 10 amps. If I had more sun or fewer trees in the way I shouldn't need as many panels to collect the same ampere value. So, install enough batteries to cover your daily use, get a heavy enough controller to cover how much you draw at a time, and add enough panels to replace the amount you use. The controller will limit the charge to protect your battery and stop the flow when it is fully charged. I use 4 /12v deep cycle batteries and run lights (the 7w screw in bulbs in an ordinary fixture works perfectly on the ceiling) task lighting over the counters, laptop and USB, plus a 1000w inverter for the stove ignition. Oh, and a waterpump. Of course the short to your question is. However many it takes. |
| Question: | The specification on the manual says max of 3200w for a 48v system. Can I put 1000w and efficiently charge my 48v battery bank and later upgrade. Tx |
| Answer: | Yes, it would work.This solar controller supports Sealed, Gel, Flooded, LiFePO4, Li(NiCoMn)O2 battery. |
Morningstar ProStar Charge Controller | World Leading Solar Controllers & Inverters
Morningstar
Product description
Morningstar’s ProStar is the world’s leading mid-range solar controller for both professional and consumer applications. Adds new features and protections using highly advanced technology. Provides longer battery life and improved system performance.Sets new standards for reliability and self-diagnostics.
- 15A at 12/24 VDC
- Digital Meter
- Negative ground
- May be used in parallel for higher current
- 5 Year Warranty
User questions & answers
| Question: | Is this a Gen 3 controller |
| Answer: | Thank you for your question. This is a PWM charge controller. |
Morningstar Sunlight Charge Controller | World Leading Solar Controllers & Inverters
Morningstar Corporation
Product description
World’s leading solar lighting controller for street and pathway lighting, parking areas, bus stations, signage, and much more. Combines SunSaver design with a microcontroller for automatic lighting control functions. Provides 10 lighting options with accurate on-board timer. User adjustable for 2 to 10 hours ON or for ON all night. Unique ON/OFF/ON settings conserve energy and turn lights on again for 1 or 2 hours before sunrise. Timer accuracy is within 2 seconds. Easy to set-up, with test-button feature and LED indicator. To confirm correct installation, test button turns light on during the day and LED indicates selected lighting option. Rugged design with anodized aluminum enclosure, epoxy encapsulation, corrosion-resistant terminals.
- Ten field adjustable lighting control options
- Rotary digital switch to select among 10 lighting options
- Test button flashes red LED to confirm correct rotary switch selection
- Sealed/flooded battery select, temperature compensation
- Five year warranty
User questions & answers
| Question: | Does this unit offer a low voltage shut off? If it does, is it adjustable |
| Answer: | You would want to match your fuse rating to the wire you are using to make that connection. |
| Question: | Should I put a 20 amp fuse between controller and battery |
| Answer: | No. this one does not equalize |
| Question: | Does it equalize the battery |
| Answer: | I believe your panel is actually a 24-Volt panel! I believe that you MUST have the 24-Volt Morningstar model to use this voltage! I believe the panel you want is "SL-20-24v". There's a couple models of this Morningstar product, to be triply sure, contact Morningstar OR download the user manual of the sl-20-24v |
| Question: | Will the ss-20L work with a 1soltech reflection series -60 cell blk 245w 60- cell Monocrystaline modules |
| Answer: | Amazing that Lithium Batteries are not mentioned in the description (shame on the seller) but if you google the manufacturer website it does say "Lithium support provided" in regards to this product. I am assuming this is LiFePO4 support NOT classic Lithium ION support. The charging requirements are different. |
Morningstar Sunguard Charge Controller | World Leading Solar Controllers & Inverters
Morningstar Corporation
Product description
A nice small, economical controller for 12V solar panels that produce less than 4.5 amps. Uses the same high performance circuitry as the more expensive SunSaver line. Epoxy encapsuated for marine environments. Easy to connect. These charge controllers are extremely reliable and have a 5 year manufacturer's warranty.
- 12 Volt 4.5 Amps
- High Quality MorningStar Charge Controller
- great little charge controller for 12 volt solar panels
- Very dependible and reliable
- Easy to connect
User questions & answers
| Question: | Does it has the Delphi connector. Is it look like the RA-9 used for Powerfilm |
| Answer: | No, You can not add another charge controller to the load side of the Prostar. You need to connect directly to the battery. |
| Question: | Do you fuse the input side from the solar panel? 5A mini fuse |
| Answer: | The ps 30 in this photo does not have the lcd display. the one with the display cost about $60.00 more. |
| Question: | Will this controller work with dual battery setup? Any potential problems |
| Answer: | Terry;The ProStar 30 accepts voltage in from only solar panel(s); so ifyour question is "does this plug in to 115 volts to trickle charge?"then the answer is "No." However, this unit has a microprocessorbased control circuitry that senses your battery bank's status and1.) charges full-blast (using all available solar input) providing a maximum voltageUP to the point where no over-voltage damage occurs to your batteries.(It uses pulse-width-modulation to keep the voltage going to batteries underthe max).then 2.) When the batteries reach a full-charge, this solar controller cranks down toprovide a "float" voltage. This, I think, is what you probably wondering about. |
| Question: | Will this work on all batteries? I have a lithium phosphate battery |
| Answer: | I just received the ProStar-30, and it's Assembled in Taiwan. |
Morningstar SunSaver Charge Controller | World Leading Solar Controllers & Inverters
Morningstar Corporation
Product description
The SunLight has all of the features of the SunSaver controller. It also has a rotary switch that allows it to turn on the loads after dusk for 2, 4, 5, 8, or 10 hours. It also has the option to turn loads on at dusk, off during the night, and on again before dawn and Another available option is to have it on from dusk until dawn. It comes with a test button that turns on the light for five minutes. _DELETE_
- The SunLight has all of the features of the SunSaver controller
User questions & answers
| Question: | Can u use this 20 L with a 12 V systems |
| Answer: | I am using 30amp automotive fuses, a couple inches from the + battery terminals, with 10 AWG wire (though the wire that came attached to the fuse holders I got from Walmart are 12 AWG, I think.) |
Morningstar SunSaver Duo Charge Controller | World Leading Solar Controllers & Inverters
Morningstar Corporation
Product description
The perfect solar charge controller for RV's, boats, and trucks with dual battery systems, one for appliances and the "engine" battery. The SunSaver Duo is an advanced dual battery bank controller for RV's, trucks, caravans and boats. It will charge two separate and isolated batteries such as a "house" and an engine battery. When one battery is fully charged, the solar charging is switched to the other battery. Features include easy to read backlit remote meter with cable and user adjustable settings. Specifications: Model #: SSD-25RM Battery Vdc (voltage direct current): 12V Solar Amps: 25 A Weight: 3 lb. / 1.36 kg Dimensions: 6.7" x 2.2" x 1.6" / 170.2 x 55.9 x 40.6 mm Warranty info: 5 year warranty from manufacturer
- Dual battery charging for 12V battery system, select primary/secondary & priority.
- Monitor performance with Remote meter included
- Ideal for RV, Boat or Remote locations.
User questions & answers
| Question: | Is this unit weatherproof |
| Answer: | You set the float charge to 14 volts but I found that the bulk voltage is set automatically with the float |
| Question: | What's in the box |
| Answer: | Yes, there are seven standard charging or load programs selected with DIP switches. In addition to the DIP switches, the TriStar provides for additional adjustments using a PC program. An RS-232 connection between the TriStar and a personal computer will enable extensive adjustments using PC software from Morningstar’s website.If you have any additional questions, please don't hesitate to contact us. |
| Question: | Is the remote display available alone?. My one doesn’t work anymore |
| Answer: | I run five 300 watt panels with mine, works great here in central america....my inverter is just 1500 watts but the controller just cares for the battery bank. It equalizes at 15.7, and has been pulled down to 11 volts..never a hickup. I had to put rf chokes on my ham radio power leads...got a bit of noise. RF chokes are cheap...buy a box and put them on your power cords if needed. |
| Question: | I'd like to see a PICTURE! The picture is of a cable that appears completely unrelated to this item |
| Answer: | This one uses a regulation technique called Pulse Width Modulation while the MPPT-60 is basically a D.C.-to-D.C. Voltage converter. The MPPT-60 supports a wider range of PV array Voltages and alllows the PV array Voltage to operate at its optimum Voltage of a slight improvement in power output. How much? Usually about 3 to 8%. However, if the PV array voltage is reasonably close to the inverter and or battery array voltage, PWM is more efficient method than D.C.-D.C. conversion. Why? Because PWM cuts through power to the output like a switch, while a D.C.-to-D.C. converter converts electricity to magnetism and then back to electricity again. I was using an MPPT charge controller on my 5,000W PV system. The MPPT charge controller at full load was consuming 550 Watts and was quite hit to the touch. The advantage I was getting by letting the PV array operate at its MPPT optimum Voltage was only an increase in output 230 Wattts. I switched to two Tristar 60 PWM charge controllers that together cost a lot less than The MPPT charge controller I was using. Both of my Tristar 60s consume less than 45 Watts at full load. The cooling fins are always at room temperature. So for me, the Tristar 60s were the most efficient and cost effective solution. My MPPT charge controller kept failing ( brand other than Morningstar). After the third time, I gave up and ended up with a solution that is better in every way including reliability. I operate my TS-60 in 48V mode. My PV array open circuit Voltage is 72 Volts. The TS-60 supports open circuit Voltages as high as 108V. |
Morningstar ProStar Charge Controller | World Leading Solar Controllers & Inverters
Morningstar Corporation
Product description
Morningstars ProStar is the worlds leading mid-range solar controller for both professional and consumer applications. This second generation ProStar adds new features and protections using highly advanced technology. These improvements provide longer battery life and improved system performance. The ProStar line of controllers set new standards for reliability and self-diagnostics. The new ProStar is available in 15 or 30 amps, 12/24 or 48 volt, and negative or positive ground. The controller may be paralleled for a solar input rating of up to 300 amps. An optional meter provides an extensive display of self-testing and system status. Qty/ Uom 1 Each Maximum Current 30 A PV Current 30 A Temperature Compensation Yes DC Input Voltage Range 9-36 V LVD Option Yes Charge Control Type PWM type with LVD DC Input Voltage 12 V, 24 V Annunciation Indicator LED and LVD and meters Adjustable Set Points Yes
- Morningstars ProStar is the worlds leading mid-range solar controller for both professional and
User questions & answers
| Question: | The photo shows the newer ps30m but after i ordered it shows an icon of the old 30m. This IS the new one pictured right??lne |
| Answer: | There is a cable that is included in this item. It is a telephone type about 30" long to run from the display to the controller. |
Morningstar SSD-25 SunSaver Duo 25 Amp Charge Controller 12V
Morning Star
Product description
This listing is for the 2 battery Charger Controller SSD-25 WITHOUT the optional remote meter display. Morningstar’s SunSaver Duo? is an advanced PWM two battery controller for RV’s, caravans, boats and cottages. Rated for 25 amps at 12 volts DC, this product will charge two separate and isolated batteries at the same time, such as a "house" and an engine battery, based on user selectable priorities. This controller also includes a backlit remote meter which may be mounted in or on a wall, and displays digital and pictorial status information about the solar power system.
- DUO SSD
- DUO SSD-25
- Solar Panel RV Boat Battery Charge Controller
User questions & answers
| Question: | I see this is for dual battery banks - but can you hook up more than one battery in each battery bank? i.e. 2 batteries in each bank (4 total |
| Answer: | Yes, the current primary image shown on the product listing is of the Morningstar PS-30M Gen3 which is the latest model. Our stock includes only the newer Gen3 model. If you have any additional questions, please don't hesitate to contact us. |
| Question: | I was wondering if you could parallel the duo with the prostar 30 amp charge controller? i'm currently running two p 30 morningstar charge controllers |
| Answer: | No, this unit should be protected from moisture. |
| Question: | will an inline fuse be needed between the battery and the regulator..? What size fuse |
| Answer: | I'm going by memory here, but if I remember correctly:1 ea controller (the rectangular box)1 ea remote meter (sq. lcd display panel)1 ea plastic (sq.) mounting box for remote meter in case you don't mount it to a panel.Misc bag of mounting hardware (screws) to mount the remote meter1 ea heavy duty communication (same type as telephone) cable. I think it's 25'(?) ... more than I needed.And, of course, a manual.I think I got everything. Its still working great in 90+ deg weather. |
| Question: | What kind of charge controller is this mppt or pwm |
| Answer: | Yes, the Morningstar RM-1 Remote Meter is available separately using the link below. If you have any additional questions, please don't hesitate to contact us. https://www.amazon.com/Morning-Star-RM-1-Morningstar-Remote/dp/B00A6XL9QA/ref=sr_1_3?dchild=1&keywords=RM-1&m=A23ANDP8TQ5WFL&qid=1600117848&s=merchant-items&sr=1-3 |
Morningstar SK-12 SunKeeper 12 Amp PWM Charge Controller 12 Volt
morningstar sunkeeper
Product description
Manufacturer Part Number: SK-12 Morningstar’s SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller. The SunKeeper is available in a 6 amp or 12 amp version (both at 12 volts DC). To withstand the high temperatures at the solar module, the controller has been designed using extremely efficient power electronics and is rated to 70°C. The SunKeeper is also certified for use in Class 1, Division 2 hazardous locations, making it an ideal controller for solar powered oil/gas applications.
- Morningstar SK-12
- SunKeeper Charge Controller
User questions & answers
| Question: | Will this controller work with lifepo4 batteries |
| Answer: | I believe it is 12 gauge |
| Question: | What is the wire gauge of this charger |
| Answer: | Hello JohnYes this unit does have a LVD low voltage Disconnect however it is not adjustable Hope this info helps you JoeGlobal solar supply |
Morningstar SunKeeper Charge Controller | World Leading Solar Controllers & Inverters
Morningstar
Product description
The Sunkeeper 6 can be mounted in any 1/2" knockout, such as in the junction box on the back of the solar panel, or in a standard breaker or disconnect electrical box. It may also be mounted to any surface with the included bracket and two screws. The LED light indicates that the unit is charging the battery. Simple lug connections or they may be cut and stripped for connection with wire nuts or barrel connectors. Instructions included. 5 year manufacturer warranty.
- Small solar charge controller in a weather-resistant package.
Latest Reviews
View all
Minnie Mouse Water Bottles
- Updated: 10.05.2023
- Read reviews
Sounding Soprano Ukulele
- Updated: 19.05.2023
- Read reviews
Koi Pumps
- Updated: 24.07.2023
- Read reviews
Amazonbasics Pliers
- Updated: 04.05.2023
- Read reviews
Pokemon Magic Card In The Worlds
- Updated: 03.03.2023
- Read reviews