8 best retaining block

Product description

This Stone Master Mold's Retaining Wall Block Mold creates 2 retaining wall blocks measuring approximately 11.5" long at the front, 8" long at the back, 6.75" deep, and 4" in height. You can create your own retaining wall blocks in the color of your choice and save money at the same time. Our rubber molds never require any release agent, so cleaning up is a breeze, with no additional steps or cost for release agent. They are production quality molds and can be used hundreds of times with proper care. Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix: This is one suggestion for mixing the concrete for manufactured stone. There are many other instructions available online, including videos. BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing. If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc. A plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble. Cure in the molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.

• Create your own custom color retaining wall blocks and save money
• No release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds
• Each mold creates 2 retaining wall blocks for walls, gardens, planters, etc.
• Made in the USA from plastisol rubber, including recycled plastisol
• Production quality molds can be used hundreds of times

User questions & answers

Product description

Description



Wooden Handle Longboard Sander for PSA Sandpaper.Rubber pad conforms to contours. Durable steel body



Features



- Color: as shown.

- Material: wood.

- Size: 10.5x2.2x2.2cm





Package Including

1 x Sanding holder

• Wooden Sand Paper Retaining Block Handcraft Polishing Tools for DIY Edge Sanding Polishing
• Spring-steel retainers secure your sandpaper so it wont bind, crumple or come off the sander.
• Foam-cushioned sanding pad
• The auto body hand sander has sturdy spring clips at the front and rear to make changing sandpaper fast and effortless.
• Comfortable hardwood handle

Product description

3.5" Tool Shop Guillotine Paver Splitter Concrete Block Brick Retaining Wall NEW

Great deal on a great concrete paver and block splitter in this brand new in original box and packaging

Unit is brand new in original box and packaging.



Feature:

Split blocks up to 4" thick and 9.5" deep

Removable 4-sided splitting knife

Lightweight and easy to transport from jobsite to jobsite

Affordable for any size project

This 3.5" Guillotine Paver Splitter from Tool Shop easily splits concrete pavers and small retaining walls. This lightweight splitter can split blocks up to 3.5" thick and 9.5" deep.



**Our Picture taking with our floor sample. so it has scratches and usage on it. But each unit we ship are brand new in original seal box.



Note:

Returns: 30 day returns. Buyer pays for return shipping

• Great deal on a great concrete paver and block splitter in this brand new in original box and packaging. Unit is brand new in original box and packaging.
• Split blocks up to 4" thick and 9.5" deep. Removable 4-sided splitting knife
• Lightweight and easy to transport from jobsite to jobsite. Affordable for any size project
• This 3.5" Guillotine Paver Splitter from Tool Shop easily splits concrete pavers and small retaining walls. This lightweight splitter can split blocks up to 3.5" thick and 9.5" deep.
• **Our Picture taking with our floor sample. so it has scratches and usage on it. But each unit we ship are brand new in original seal box.

User questions & answers

Product description

This Stone Master Mold's Retaining Wall Block Mold creates 2 retaining wall blocks measuring approximately 10" long at the front, 6" long at the back, 5.75" deep, and 3" in height. You can create your own retaining wall blocks in the color of your choice and save money at the same time. Our rubber molds never require any release agent, so cleaning up is a breeze, with no additional steps or cost for release agent. They are production quality molds and can be used hundreds of times with proper care. Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix: This is one suggestion for mixing the concrete for manufactured stone. There are many other instructions available online, including videos. BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing. If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc. A plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble. Cure in the molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.

• Create your own custom color retaining wall blocks and save money
• No release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds
• Each mold creates 2 retaining wall blocks for walls, gardens, planters, etc.
• Made in the USA from plastisol rubber, including recycled plastisol
• Production quality molds can be used hundreds of times

User questions & answers

Product description

Retaining wall block concrete mold measures 9 1/2 inches from the front to back (measuring in the center of mold) - 11 inches across the front and 8 inches across the back. Height is 4 inches tall. Make your own decorative blocks with this Textured face Retaining wall block concrete mold set 3003 makes some beautiful concrete blocks. Use this mold with your own concrete mix to create your own borders and walls around flowerbeds, patio areas and more.



All molds come with basic instructions for creating your pieces. Molds are ideal for business or hobby use. Our molds are made of several different blends of polyethylene plastic which allows you to use the molds over and over. Our plastic is somewhat flexible so it allows for your finished pieces to be removed from the molds easily. Our molds are a great way for you save money on that do it yourself project, create the finished look you want for pennies compared to what you would pay for these at a retail store. Or maybe your looking at making some extra money and want to start your own business, we have lots of different molds to choose from. Make your own patio pavers to decorative stepping stones as well as garden benches and downspouts we've got you covered.



You can use plaster, concrete, cement, mortar, resin and soap in all of our molds.



We ship UPS and USPS - so please include a physical address to ship to if you have a po box as some packages could be shipped out UPS due to the size, weight and location. Please note that international orders that shipping fees do not cover any additional charges that your country may declare as an import tax or fee once it enters your country. Every country has different regulations and not all have additional fees but we want all international buyers to be aware prior to making their purchases.

• Retaining Block Concrete Mold Set 3003
• Polyethylene Plastic Mold
• Each order comes with easy to use basic instructions
• Finished piece 9 1/2 inches by 11 inches across 4 inches Tall
• Mold to make your own decorative stones

Product description

Make your own decorative blocks with this Textured face Retaining wall block concrete mold set 3001 makes some beautiful concrete blocks. Use this mold with your own concrete mix to create your own borders and walls around flowerbeds, patio areas and more. Retaining wall block concrete mold measures 7 1/4 inches and 11 inches across, height is 3 3/4 inches



All molds come with basic instructions for creating your pieces. Molds are ideal for business or hobby use. Our molds are made of several different blends of polyethylene plastic which allows you to use the molds over and over. Our plastic is somewhat flexible so it allows for your finished pieces to be removed from the molds easily. Our molds are a great way for you save money on that do it yourself project, create the finished look you want for pennies compared to what you would pay for these at a retail store. Or maybe your looking at making some extra money and want to start your own business, we have lots of different molds to choose from. Make your own patio pavers to decorative stepping stones as well as garden benches and downspouts we've got you covered.



You can use plaster, concrete, cement, mortar, resin and soap in all of our molds.



We ship UPS and USPS - so please include a physical address to ship to if you have a po box as some packages could be shipped out UPS due to the size, weight and location. Please note that international orders that shipping fees do not cover any additional charges that your country may declare as an import tax or fee once it enters your country. Every country has different regulations and not all have additional fees but we want all international buyers to be aware prior to making their purchases.

• Retaining Block Concrete Mold Set 3001
• Polyethylene Plastic Mold
• Each order comes with easy to use basic instructions
• Finished piece 7 1/4 inches by 11 inches across 3 3/4 inches Tall
• Mold to make your own decorative stones

User questions & answers

Product description

- Outdoor hardscaping culvert retaining wall

- Includes 6' L piece

- Unique fiberglass construction

- Textured to resemble genuine block wall

-

- Installs faster than traditional block walls

- 6' L x 3" D x 24" H; 20 lbs



Transform the culvert at the end of your driveway into a beautiful landscape feature with the FiberBloxx Culvert End Cap. Primarily designed for residential driveways, this Culvert End Cap is made of durable fiberglass and made to withstand all weather conditions from extreme heat to frost. In addition to the 1-piece convenience, this panel is also designed to be easy to install. After preparing the ground for installation, lay down pea gravel (must be purchased separately), and tamp it down to create a level base that allows for drainage. Then, set the panel on top of the prepared pea gravel and loop the ends of the steel cables in the back of the panel through steel posts. Pound the posts into the ground with a mallet to help keep them in place and provide tension with the cables. Once the posts are pounded into the ground with the cables attached, fill in the hollow space in the back of the panel with pea gravel and backfill sand. This helps ensure proper drainage and will also help keep the patent-pending panels firmly in place. Each of these innovative panels are proudly made in the USA in Wisconsin.

• Pre-made 6-foot culvert section: 6 feet long x 2 feet tall x 3 inches deep; 11.25" diameter culvert opening; 20 pounds
• 1-piece design made in the usa: FiberBloxx walls are constructed using a unique 8mm thick fiberglass technique that results in the look and feel of actual stone but only requires approximately half the labor to install; also includes 2 steel cables to put the stakes through
• Outlasts standard stone block walls: Retaining wall section is 1 piece which means it does not risk shifting or breaking apart like typical landscape block walls
• Installation takes less time than block walls: Because the blocks don't need to be laid out installation doesn't take nearly as long as traditional retaining walls; To install a level, drill, rubber mallet, hammer, shovel, and pea gravel are needed (not included)
• Worry-free purchasing: FiberBloxx backs its products with a 10-year manufacturer's warranty for worry-free purchasing

Product description

Anjon Manufacturing Extreme Weed Block

Extreme Weed Block is a needle punched nonwoven polypropylene geotextile fabric with a random, three-dimensional pore structure and a uniform, felt-like consistency. Extreme Weed Block combines strength, flexibility and superior permeability in a UV resistant weed block, planting fabric and landscape barrier. It allows the free flow of water, air and nutrients through soil to plant roots while blocking sunlight and weeds.

Extreme Weed Block is UV resistant, chemically inert and environmentally friendly. Nonwoven geotextile fabric is commonly used in landscape & garden planting beds to prevent weed growth, under patio or paver stones to allow water to drain and not pool or puddle, and to separate soils and stone in many ground-level and subsurface drainage applications.

• Allows the free flow of water, air and nutrients through soil to plant roots while blocking sunlight and weeds. Encourages plant root growth by keeping soil cool and moist.
• Combines strength, flexibility and superior permeability in a UV resistant weed block, planting fabric, landscape barrier and ground cover. Virtually indestructible and is unaffected by moisture, mildew and hydrocarbons
• Needle punched nonwoven polypropylene geotextile fabric with a random, three-dimensional pore structure and a uniform, felt-like consistency. Superior drainage characteristics versus woven geotextile fabric
• Made in the USA! Made from UV and chemical resistant 100% virgin polypropylene & 100% recyclable.

• Allows the free flow of water, air and nutrients through soil to plant roots while blocking sunlight and weeds. Encourages plant root growth by keeping soil cool and moist
• Extreme Weed Block combines strength, flexibility and superior permeability in a UV resistant weed block, planting fabric, landscape barrier and ground cover. Virtually indestructible and is unaffected by moisture, mildew and hydrocarbons
• Needle punched nonwoven polypropylene geotextile fabric with a random, three-dimensional pore structure and a uniform, felt-like consistency. Superior drainage characteristics versus woven geotextile fabric
• Made in the USA! Made from UV and chemical resistant 100% virgin polypropylene & 100% recyclable.
• Backed by a 20-Year Limited Manufacturer’s Warranty! Extreme Weed Block is manufactured in 5’, 10’ 15’ widths and will ship to you in one or more pieces equal to the total square footage of the size selected. Simply lay the pieces next to each other to install.

User questions & answers