12 best industrial water hoses

Product description

Double-reinforced rubber-and-vinyl construction resists kinks, abrasion and the toughest conditions.

From the Manufacturer

Gilmour's commercial rubber/vinyl hose is industrial strength for commercial use and features 6 ply construction with 500 psi burst strength.

• Double-reinforced rubber-and-vinyl construction for the ultimate in strength and durability
• 400PSI burst strength for guaranteed long life
• Heavy-duty metal coupling with O-ring for a tight durable seal
• 100 feet
• Lifetime warranty
• 3/4″ dia. with metal spring cover to prevent kinks

User questions & answers

Question:	Is this hose
Answer:	If you want to repair or replace the brass fittings, I suspect you can. If you tear it and try to repair it with that stretch, waterproof "magic" tape, I think you can. I have this hose and I love it. I have a Flexzilla in a shorter length that I use sort of as a "connector." I LOVE this hose.
Question:	Is this hose uv resistant
Answer:	I've used mine professionally for roof cleaning for the past 5 years. I'm looking for a replacement now as we finally wore that one out. Very flexible, no memory, and virtually kink-free. I say virtually because I had maybe 3 or 4 kinks in the past 5 years, and all but one popped the kink straight in about 1/4 second. By the time I realized there was a kink and an interruption in water flow, the water was flowing again. These hoses are amazing. I just don't understand why the cost more than doubles when you go from 5/8 inch inside diameter to 3/4 inch inside diameter.
Question:	Is this hose hard to coil? Can it be used on a reel without struggling to roll it out and back
Answer:	Yes, it will connect normally to both normal household water spigots and water hose attachments/sprayers. I've had a Flexzilla hose and used it for my professional exterior cleaning business the past few years and love it because constantly running back to find and fix a hose kink quickly becomes irritating. Each time a hose fails I replace it with another Flexzilla. When the host does kink (which is rare) it straightens itself out in about 1/4 second or so. The hose is sort of like a balloon and when it kinks, it loses pressure on one side of the kink and the other side builds up pressure and POP!, the kink straightens out. If you're not paying attention you'd probably not even notice it. Most garden hoses are 5/8 inside diameter so this 3/4" ID hose will give you a better volume throughput. Unless you want to spend a bit more for an Underhill nozzle, the "Orbitz Max Max Nozzle" is the best I've found and about the only place I can find it is at Lowe's. Just test the thumb rocker on several because some are pretty stiff. These have a larger diameter through the entire nozzle so you get a better volume of water flow all the way to the nozzle. The Orbitz nozzle is about $5 more, but well worth it.
Question:	Does this 3/4 inch hose require the use of a brass fitting from the spigot that screws in at 5/8 inch and which then screws into the hose at 3/4/ inch
Answer:	I've used this professionally for about 5 years and around the house and I love this hose, and just bought 3 more a month or so back. They will kink if there is no water pressure or water in the hose, but when it is under pressure, it almost absolutely never kinks. When it does kink, the water flow stops for about 1/4 second, then starts again as the kink pushes its way out. Even after 5 years my old hose still has a fairly bright color, but I didn't realize how much it had faded from constant sunlight. I do roof cleaning and house washes so the hose is constantly around bleach as well which could be part of the reason. It eventually developed a pinhole leak inside the green jacket and water filled part of the area between the inner and outer hose giving me some odd looking tumor looking ballooning until eventually it started leaking. At that point I bought 3 more of the Flexzilla hoses with the swivel handles and love these even more. The built in hose washer has never come out or been replaced and I've never had a leak at either end. Underhill makes a great ball valve I put on the ends of my hoses so I can swap out nozzles and such without running back to the spigot every time too. Drumm makes a good ball valve too, but it tends to hit the handle on my newer Flexzilla hoses where the angle of the handle on the Underhill is high enough to miss the hose grip.

Product features

Gilmour Pro Commercial Hose

• Double-reinforced rubber-and-vinyl construction for the ultimate in strength and durability
• 400PSI burst strength
• Solid brass coupling with O-ring for a tight durable seal
• Steel spring prevents kinks at spigot
• Made in the U.S.A.

Product description

Only Neverkink hoses guarantee no kinks or tangles, the patented Reflex Mesh technology ensures a hose that's easy to maneuver. Industrial strength couplings are made with lead-free aluminum and are leak proof and crush-resistant, a heavy duty steel coil prevents kinking at faucet. All Neverkink product contains MicroShield, anti-microbial protection, guards against mold and mildew that can cause hose deterioration. The series 4000 NeverKink is flexible to 45 Degree. This hose comes in 5/8th" and 3/4" diameter and is available in 50', 75' and 100' lengths. Made in the USA. Not for Hot Water Use

• Guaranteed Not to Kink or Tangle
• Heavy Gauge Power Coil
• Industrial Strength Lead-Free Aluminum Couplings Leak & Crush-proof
• Contains Microshield to Prevent Mold and Mildew
• Remains Flexible Down to 45 degrees
• This hose is not intended for drinking water use.

User questions & answers

Question:	Will the 3/4", 100-foot hose fit on a hose reel? Is it hard to coil with the hose being so stiff
Answer:	It will fit, but you will need a larger capacity reel. To give you an idea, it fills about 90% of the reel I bought, which is rated for 250 ft of hose. That rating is probably assuming 1/2" hose, so the 3/4" obviously takes up more room. It is not hard to wind on the reel (though that may vary from one reel to the other), but I would not consider this a hose that you would want to coil off of a reel. If you did, it would have to be large coils.
Question:	I have the NeverKink 3/4" x 100' and cannot find a decent reel for farm. Suggestions out there
Answer:	I got my reel from Home Depot.
Question:	Please can you tell me the weight of teknor apex neverkink, 9844-100 pro water hose, 3/4-in x 100-feet
Answer:	This weighs approximately 24 lbs.
Question:	Can you confirm that this hose is black in color
Answer:	The Apex Neverkink Commercial-Duty Garden Hose is black in color.

Product features

Only Neverkink Water Hoses are Guaranteed Not to Kink or Tangle

Teknor Apex was the first US manufacturer to launch a kink-proof hose, which featured a patented technology called NTS (Non-Torsion System). The translucent strip that runs the length of every hose reveals the Neverkink secret which solves the consumer complaint: Kinking.

This Neverkink line offers benefits guaranteed unconditionally–producing a hose that is easy to maneuver so kinks, twists and tangles don’t have a chance to get started.

Neverkink Commercial Pro Water Hose

The patented Reflex Mesh technology utilizes a mesh network of reinforcement so kinks, twists and tangles don’t have a chance to get started. All Neverkink products contain MicroShield antimicrobial protection which guards hose against mold and mildew. Made in the USA.

Patented Couplings and Power Coil

Patented industrial grade couplings are made with high strength, lead free aluminum that will not rust or corrode. Crush-proof up to 1,400 pounds. Heavy gauge flexible power coil strain relief prevents kinking at the faucet.

Made in the USA

All Neverkink hoses are proudly Made in the USA. Engineered with you in mind.

Ultra-Flexible Down to 45 Degrees

Neverkink water hoses are ultra-flexible for easy handling and maneuverability. Remains Flexible Down to 45 degrees. Product is best for tradesmen, landscape professionals, and contractor environments. Great for rigorous every day use. Frequently used with spraying attachments such as nozzles, chemical sprayers, and sprinklers.

Neverkink 9844 Series 4000 Commercial Duty Pro Garden Hose

Made in the USA. Not for Hot Water Use. Product is best for tradesmen, landscape professionals, and contractor environments. Frequently used with spraying attachments such as nozzles, chemical sprayers, and sprinklers.

Made in USA with lifetime guarantee

Available in both 5/8" and 3/4" diameter and 50', 75' and 100 Foot lengths.

Extreme performance guaranteed. The Teknor Apex NeverKink PRO contractor hose is perfect whether you’re a third generation farmer growing a strong harvest or a hands-on contractor building the future brick by brick, one thing remains the same: you need the right tools at the right time. Teknor Apex Neverkink PRO 3/4 In. diameter allows for high flow for applications that require larger volumes of water. This hose is manufactured with a patented anti-kink technology that prevents kinking. Don’t let your hose hold you back from a job well done.

Product description

This Continental 50' hot water hose is made of heavy gauge rubber for resistance to abrasion and corrosion, but maintains its flexibility in cold temperatures. It has an internal spring coil for resistance to kinking at the faucet and to maintain water pressure. The 5/8" hose is equipped with crush-proof brass fittings for strength and resistance to corrosion, and it has a temperature range of -40 to +190 degrees F. As a part of the Continental Corporation, the ContiTech division numbers among the leading suppliers of a host of technical rubber products and is a specialist for plastics technology. ContiTech develops, produces and markets high-tech products and systems for the automotive and industrial markets.

• 50' hot water hose that maintains flexibility at cold temperatures
• Heavy gauge rubber for resistance to abrasion and corrosion
• Internal spring coil for resistance to kinking
• Brass fittings for strength and resistance to corrosion
• Temperature range -40 to +190 degrees F

User questions & answers

Question:	Problem with kinking when using hot water? Thank you
Answer:	There is an option to purchase a quantity of either 1 or 6. I'm guessing you selected the "6". I did obtain 12 for a non-profit group in a national conservation park and they have held up well. I would, however, recommend a smaller version and buying a pruning saw. Trying to cut 2" with any pruner requires a lot of effort. I am 6' and weight 200 lbs and believe you are better off with the 20" or 24" (1.5" cutting capacity) bypass (better cut) and Corona's 10.5" razor folding saw. If you plan on doing a lot of sawing get a replacement blade at the same time. Blades are not able to be sharpened and ALWAYS end up being dull at the most inconvenient time. Corona has an excellent replacement policy if anything goes wrong. With over $2k in their tools I've only had to send back two items. One for a defective plastic latch and one for a hickory handle that broke. Honestly, the broken handle was more from my trying to cut something too big when I failed to have my saw with me.
Question:	Available in 100 foot
Answer:	I am sorry that replacement blades are not available for this lopper
Question:	Does this have heavy brass fittings or just regular metal ones
Answer:	I don’t know the country of origin. I is a good and sturdy tool though. Worked great for my needs. Was easy to handle and cut very well.
Question:	Is this hose stiff and unflexible or more soft
Answer:	I found that the traps are the best I have found however I also put lime on my driveway under my car rats will literally move out I put along walls in garage and around front yard I have 3 dogs and lime is harmful to domestic animals but lime and the traps helps get rid of rats and mice very quickly

Product description

FLEXZILLA GARDEN HOSE 5/8 IN X 50 FT

From the Manufacturer

Flexzilla 5/8" x 50' garden hose. Flexzilla is a revolutionary hose featuring a Premium Hybrid Polymer material that redefines flexibility. Flexzilla hose characteristics offer zero memory allowing it to lay-flat exactly where you drop it and won’t work against you during operation or coiling after use. Flexzilla offers extreme all-weather flexibility, even in sub-zero conditions. Flexzilla is currently in use by oil companies located in Alaska!

• Extremely flexible – Our distinctive green hoses are built from a special polymer blend that allows for all-weather flexibility, even in subzero temperatures (-40° to 140°F), making it easy to use in the harshest conditions
• Extremely durable – Purpose built to handle any industry and environment. Abrasion resistant outer cover and crush resistant anodized aircraft aluminum fittings means this hose is always ready to work
• Won't kink under pressure – Our hoses are made from a special hybrid polymer that is memoryless, meaning it will lay flat, resist kinks, and can coil easily, making them a breeze to put away
• Leak free and drinking water safe - Each garden hose contains superior O-rings, ensuring a long lasting and leak free connection. Our hybrid polymer is lead-free, making all hoses drinking water safe
• Lightweight - Lighter than traditional garden hoses making Flexzilla easier to carry and maneuver around the yard

User questions & answers

Question:	Has the manufacturer fixed the thread issue? (3 threads vs
Answer:	sold these for many years, never hear of the issue
Question:	What is the burst/psi strength
Answer:	At http://www.flexzilla.com/water/garden-hose/ , Flexzilla states, "Max. working pressure at 70°F: 150 psi." If the pressure at your hose cock exceeds 150 psi, this is not the hose for you. Furthermore, the maximum working pressure rating will drop off quickly as the hose temperature rises.
Question:	Can you run plutonium through this hose to fill a spaceship? Asking for a friend
Answer:	Well, since plutonium is a metal with a melting point of 1,183°F, the only things left of the hose will be the steel hose connections. I love jokes too, but they should have more thought put into them.
Question:	is this item made IN USA
Answer:	One person responded that if it was made in the USA you couldn't afford it. But they forget that it costs more to constantly replace it.

Product features

Flexzilla Garden Hose

Flexzilla Garden Hose was engineered with a lightweight Flexible Hybrid Polymer to lie flat and eliminate kinking under pressure. It redefines flexibility, making it easy to maneuver around trees, bushes or other obstacles. Zero memory means your sprinkler stays put without twisting. Flexzilla Garden Hose doesn’t fight you when you coil it. Plus, with our superior O-ring, you get a long-term, leak-free connection at the spigot. The Flexible Hybrid Polymer inner tube material is drinking water safe.

Flexible Hybrid Polymer Garden Hose

Flexzilla is made from lightweight, flexible hybrid polymer material. The Flexzilla won’t kink under pressure. It is tangle free making work easier in the garden, around the house and on the job.

Extreme All Weather Flexibility

While other hoses get stiff and brittle in cold temperatures, the Flexzilla stays flexible even in extreme weather conditions.

Lightweight

The Flexzilla is lighter than traditional garden hoses making them easier to carry, lift and maneuver around the yard.

Durable

The super strong flexible hybrid polymer material is abrasion-resistant and comes with crush-resistant aluminum fittings.

Easy to Coil

Flexzilla garden hose doesn’t fight you when coiling it. And, zero memory means the sprinkler stays put without twisting.

Drinking Water Safe

The flexible hybrid polymer inner tube material is drinking water safe.

Product description

Inner diameter: 3 Inch

Length: 30 Feet

Shape: Flat hose

Color: White

Working pressure: 100 Psi

Maximum pressure: 300 Psi

Q: Traditional PVC hose is too bulky and too inconvenient to use, your hose can be a good relacement ?

A: Of course, our industrial hose is light, easy to use, and free to move, can completely replace PVC hose.

Q: Traditional PVC hoses are not durable and can crack after several times of use, and easy to break when folded, your polyester hose can be folded at will?

A: The material of our water hose is soft and wear-resistant polyester, and then coated with polymer material polyurethane to make the hose more flexible, you can fold it at will.

Q: Under what circumstances can your water hose work normally? Can I use it in Winter? How about hot water?

A: Our industrial hoses work well in temperatures from -40 °F to 120 °F. It can be used in winter and hot water because our hoses can withstand water temperatures up to 185 °F.

• Material - Outer layer of the industrial hose is made of high-quality polyester yarn , smooth appearance, anti-fracture, corrosion-resistant, wear-resistant, heat-resistant, high-pressure resistant, soft, anti-kink, environmentally friendly, non-toxic, long service life. The inner wall of the hose is coated with a high quality polyurethane, it has super toughness, smooth inner wall, arbitrary bending, mildew proof, not easy to degumming, oil resistant, anti-oxidation, ensure smooth water flow.
• Craft - White exterior makes this flat water pipe look bright, clear, eye-catching, easy to identify, UV resistant. Our hose fuses the polyester outer layer and the polyurethane coating as one when the polyurethane melts at temperatures up to 100 degrees Celsius. The hose is lightweight, movable, easy to use. When you are not using it, wash the hose first and then fold to store it. The flat fold designed makes it compact storage and saving your space. Avoid direct sunlight, to extend its life.
• Application - This Scalable Industrial Hose applies to: industrial, agriculture, construction, quarries, mines, fire-fighting equipment, ships, and other open discharge projects. It can be used for farmland irrigation, discharge of water from factories, swimming pools, quarries, oil transportation in oil fields, etc. The pool backwash hose can be easily connected to a water pump, it can also be used with fire hydrants and fire pumps (cars) to transport water.
• Packaging - Package includes an outdoor hose of 3 inch (inside diameter) x 30 feet (length). In addition, there also comes with accessories (include two 304 stainless steel wire clamps and a non-woven storage bag as gift).The stainless steel wire clamps will help you connect Cam Groove Hose Fittings Male and Female, or Short Suction Coupling Set Aluminum Hose Fitting.
• After-sales support - We are here to make sure you are 100% satisfied. If you encounter problems during use, please be sure to contact us, we will promptly respond and provide a perfect solution.

User questions & answers

Question:	Can i use this with a leaf blower? I am intending on attaching to a pole and use to blow leaves out of the gutters on the 2nd story
Answer:	Shouldn't be a problem...it's a lot more flexible than a rubber hose. I just hang mine over a vinyl-coated hook from HD attached to the side of the house.
Question:	I need to attach this to a fitting that is also 3 inch inside diameter and 3 1/4 exterior diameter will this work
Answer:	I live in Tucson and don't store any hose in direct sun.
Question:	Can this be cut to size
Answer:	the nozzle is responsible for that.

Product description

👍Solution4Patio is a major manufacturer of high quality gardening tools, with 30 years of experience. Over years of producing the best garden tools, Solution4Patio has consistently aimed to help to creat an enjoyable gardening experience for their customers.High quality! 💪 Fast shipping! 🚚 Best service! 😊





Features:

Condition: 100% Brand New

Material: High-quality PVC,corrosion-resistant, and sturdy.

Color: Red

Item Size: 5/8 in. Dia x 10 ft.

Item Weight: 0.5 pounds

Applications: Ideal for Water Softener, Dehumidifier, Vehicle Water Filter etc.





👀Why Choose Solution4Patio's Products?

- High quality product and service

- 12 Years Warranty

- 24-hour friendly email customer support





🙏Feedback:

1) You satisfactory is our only pursuit. Your feedback is extremely important to us.

2) Please kindly leave us positive feedback(5 stars) once you're satisfied with your purchase.

3) Please don't hesitate to contact us if you're unhappy with this, we'll meet all your requirements.





Package Includes:

1Pc High Quality Water Hose 5/8 in. Dia x 10 ft.





💋ADD TO CART NOW and you'll fall in love instantly with this high-quality hose! Comes with 12 years product guarantee. Reach out and we will make it right!

• 👍 NO KINK OR NO TANGLE - New upgarde 5-layers high technology PVC material prevents hose from tangling and kinking. Extremely durable hose for household or commercial.
• 👍 BRASS COUPLINGS, NO LEAKING - Industrial male and female connectors leak proof. Solid brass fittings are reinforced with high-grade industrial rubber to maintain a tight seal on your hose and provide anti-skid protection. Remember put the rubber gasket into the hose conncter that will avoid leaking water.
• 👍 BURST RESISTANCE & ANTI UV - With a burst strength of 30 Bar (450 Psi) and heavy duty nylon reinforcement for high pressure areas, this 5 layers tube reinforced with X-shape threads hose was built for heavy duty jobs around your home and garden. Extreme all weather flexibility from -20°C - 60°C.
• 👍 HIGH QUALITY HEAVY DUTY GARDEN HOSE - Designed to be used for years to come, this durable hose reel is the perfect choice for when you want to wash your car or water the plants, or even give your muddy dog a clean. This hose is ideal to suit both household or professional watering needs.
• 👍 BEST SERVICE - We offer a 12-YEARS WARRANTY and providing exceptional quality products and top notch customer service! Excellent purchase!

User questions & answers

Question:	Can this hose be used as an extension to an existing hose outdoor
Answer:	3/4" length. We do recommend getting some extra long hinge screws if you are replacing existing hinges. The ones that come with it are standard and sometimes the screws won't grab if you are replacing existing hinges.
Question:	Does the female coupling turn in your hand
Answer:	These are 304 Grade Stainless Steel.

Product features

Short Hose for Dehumidifier

Easily drain your dehumidifier with this hose from plumb craft. Customizable to your desired length, and easy to install, this will automatically drain your dehumidifier for you providing you with piece of mind.

Short Hose for Reel Cart

This short garden hose is both durable and flexible, so it's robust enough to replace the existing hose on your hose reel, as well as pliable for rolling up and tucking into tight places. This leader hose is also lightweight, so you can wind it around a hose reel with ease.

Short Hose for Pool Pump

With a burst strength of 30 Bar (450 Psi) and heavy duty nylon reinforcement for high pressure areas. Suit for booster pump pressure hose like lawn water pump electric water transfer or pool pump.

As Janitor Sink Hose

It's perfect for attaching to your service sink or sill faucet for a variety of commercial kitchen and janitorial applications. And is a great hose for your mop sink. This durable hose is a great addition to ensure that your mop bucket gets filled without the hassle of putting the bucket in the sink and avoid the splashing.

As RV Filter Gray Water Hose

Flush your waste water with this distinctively gray water hose that's instantly recognizable as a non-drinking water safe hose. This customizable size perfectly connects the sink to the gray water tank.

Short Hose for Water Softener

Washing machine hose is built to withstand high pressure. This short washing machine hose is designed to prevent kinking and crimping. This flexible supply line no corrosion and is easy to install, and with male and female end, as replacement parts for water softener.

Stand Wear and Tear

The tough 5-ply construction makes this garden hose ideal for yardwork and general household maintenance.

No Kink

This heavy duty garden hose is constructed with an internal cross-weave mesh so that the hose coils easily without kinking.

Fit for Extremely Weather

Flexible in all weather conditions from sub-freezing temperatures to running hot water up to 60°C.

Male and Female Brass Fittings

Industrial grade brass chrome-plated, tight seal fittings are long-lasting, crush-resistant and no leaking.

Reinforced Commercial

With a burst strength of 30 Bar (450 Psi) and heavy duty nylon reinforcement for high pressure areas.

Anti-Skidding

Solid brass fittings are reinforced with high-grade industrial rubber to maintain a tight seal on your hose and provide anti-skid protection.

• TESTED TOUGH---This flexible hose is constructed from 2 layers lightweight hybrid and 1 layer bursting resistant polyester mesh. Giraffe Tools flex hose has been tested rigorously to confirm burst strength, kink resistance, connection strength and abrasion resistance.
• APPLICATION---Watering hose supports 150 psi working pressure. Recommended using at residential water pressure. 5/8" internal diameter supports higher water flow rate. This hose is not intended for drinking water use.
• HANDLES EASILY---Male&Female 3/4" Nickel Plated Brass Connector with swivel grip, easy to connect faucet or hose reel. Hybrid material is 29% lighter than rubber, easy to coil and maneuver.
• ALL WEATHER FLEXIBLE---This heavy duty hose can resistant -40 Degree to 150 Degree F Ambient. Easy to move and bypass corners, trees, bushes and other obstacles.
• EXTREMELY DURABLE---Giraffe Tools flexible garden hose with purpose made microshield ensure dirty resistant and abrasion resistant. Copper Connecters are crush resistant.

User questions & answers

Question:	I want to connect a garden hose bib male to a sink faucet male? will this work
Answer:	Utility sink faucets are usually fitted with the same threads as hose bibbs. A washing machine supply line has a female connector on each end. Connect the washer hose to the utility sink faucet, connect the garden hose to the other end of the washing machine hose. I cannot guess why you want to do this, but knock yourself out!
Question:	The hose as received has an overwhelming odor of rubber. I have kept it outside for two days. How long until the odor dissipates
Answer:	I just have the very short connector hose. It stays outside for now. Mine was not overwhelming however not full length hose
Question:	can pressure be left on this hose permanently
Answer:	Absolutely NOT. I was mixing cement which meant the hose was under pressure for 30 to 40 mins at a time. The connector blew out after about 3 cycles of this.
Question:	Is this drinking water safe? seeing it advertised as 'mnpt' (pipe thread) when it certainly is not is another question. hose thread? probably
Answer:	Taylor, 'lead' in this description is meant like 'leader'. It's a lead hose, meaning it is small like a connector hose. Lead does not equal lead (led) as in pencils. But no, I do not see where it says it is drink safe. I do see that hybrid hoses appear to be and they're very flexible.

Product features

3/4 IN. MNPT BRASS FITTINGS

• Brass with nickel sleeves coating fitting Ends. Swivel Grip, Special Protector Design for ends.
• Giraffe's garden hose brass fitting is adapt the eight-legged lock up process to ensure the good sealing and against leaking. In addition, the tensile strength is quite strong, which makes the hose and brass fitting locked up，so the hose will not be pulled out.

Flexible in Extreme Weather

• Giraffe Garden Hose Temperature Rang is: -40 Degree to 150 Degree F Ambient
• While other hoses get stiff and brittle in cold temperatures, giraffe tools hose stays flexible even in extreme weather conditions.

Product description

The Element Lead-Free, Drinking Water Safe Contractor Farm Hose is a water hose ideal for farm or construction sites, designed to withstand daily wear and tear from demanding work. This farm hose features extra-large crush-proof coupling and hose armor that prevents kinking at the spigot, allowing you to rely on the hose to last through many years of use around heavy equipment and machinery without being damaged. Equipped to handle tough jobs, the farm hose has a powerful bust strength of 600 PSI for high intensity water applications; features reinforcements at key stress points to ensure many years of reliability. Hose is completely lead-free and meets the lead-free standard under the Safe Drinking Water Act, as well as California's strict standards on phthalate content; allowing you to use the hose to water vegetables, fruits, grains, and livestock safely without added chemicals.

• Delivers powerful burst strength of 600 PSI; Backed by extra large, crush proof couplings
• Hose armor with reinforcements at key stress points
• Designed with octagonal shape to prevent kinks and slippage during use
• Meets the lead-free standard under the Federal Safe Drinking Water Act; Safe for vegetables, fruits, grains, and livestock
• Measures 75' in length and 3/4" diameter; Made in the USA

User questions & answers

Question:	Where would i find the limited lifetime warranty information for this item
Answer:	These are plated. It says in the description “polished brass steel hinges.” It is a little misleading Until you read the description carefully. No where do they state “solid brass.”
Question:	I just bought the 3/4 inch diameter hose. Can you recommend a nozzle for basic watering and car washing
Answer:	No, this is not a spring hinge. You need a self-closing spring hinge to do that.
Question:	what is it made of
Answer:	You knock out the decorate cap on the bottom of the hinge which is the side with the hole in it. Then, you can remove the hinge pin like another regular hinge by knocking the pin out.
Question:	Is this 3/4 ID
Answer:	I believe #12 hardware would be to large for these hinges to lay flush. I used #7 hardware on mine just to ensure the head was recessed enough for a good fit. i believe #8 hardware would also work but I could get only #7 in stainless steel.

Product features

Element Farm Water Hose

The Element Contractor Farm Hose was designed to withstand daily wear and tear from demanding work on a farm or construction site. This farm hose features extra-large crush-proof couplings and patented hose armor that prevents kinking at the spigot, so you can rely on this hose to last through many years of use around heavy equipment and machinery without being damaged.

Equipped to handle the toughest of jobs, this farm water hose has a powerful burst strength of 600 PSI for high-intensity water applications.

The Element rubber farm hose is also lead-free and meets the lead-free standard under the federal Safe Drinking Water Act and California’s strict guidelines on phthalate content, so you can safely use this hose to water your livestock, vegetables, and grains.

Powerful Burst Strength

With a high burst strength of 600 PSI, this farm water hose is equipped for the most demanding jobs and features reinforcement at key stress points to ensure many years of reliability.

Safe for Livestock

This farm water hose is completely lead-free and meets the lead-free standard under the safe Drinking Water Act, as well as California’s strict standards on phthalate content. Use this hose to water vegetables, fruits, grains and livestock safely without added chemicals.

Crush-Proof and Kink-Free

The extra-large couplings feature a crush-proof design for long-term durability and the patented hose armor prevents kinking at the spigot.

Product description

The Swan Commercial Use Contractor Heavy Duty Clay Water Hose is a water hose ideal for industrial applications such as construction job sites that require wide areas of coverage, by moving water in higher volumes. Designed with a special material that is covered in an abrasion-proof jacket for on the job reliability and high-performance use with a powerful burst strength of 400 PSI; includes crush-proof couplings and is kink-resistant allowing you to connect and forget, while concentrating on the job without interruptions

• Delivers powerful burst strength of 400 PSI; Backed by heavy duty, crush proof couplings
• Hose construction allows kink resistance; Concentrate on the job without interruptions
• Designed with special material covered by an abrasion-proof jacket
• Ideal for industrial applications such as contruction job sites; Moves water in high volumes
• Measures 100' in length and 3/4" diameter; Made in the USA

User questions & answers

Question:	OK with hot water
Answer:	I would think so
Question:	Have they fixed the crimp ends spraying fans of water
Answer:	I bought this for my mom and it did fit hers. I used the model number off her mixer to get this product.
Question:	Is this hose pure rubber or dose it have a pvc coating. So when it gets cold it is hard to work with
Answer:	I have, an Artisan KSM 150, and I ordered this very item a few days ago and it came in today, Oct. 21, 2015. It was the first thing I checked this morning when it arrived, was if it would fit properly. And wala...it's an absolute perfect fit. So yes, it will most absolutely fit your 150.
Question:	Is it 3/4" inner diameter or outer? I figured it's probably ID but wasn't 100% sure. Thanks
Answer:	The problem is that KitchenAid made the replacement hubs out of cast aluminum instead the original stainless steel. The wire is still stainless, but the hub is not. This is true of the ones bought through Amazon or directly from KitchenAid. When run through the dishwasher, the aluminum hub oxidizes and turns black. The black rubs off easily on your hands and food. I found a company that electroplated the hub for me. Now runs in dishwasher with no oxidation, no black junk on it.

Product features

Swan Contractor+ Water Hose

This Swan Heavy Duty Water Hose features a ¾" diameter that helps move water in higher volumes, making it ideal for industrial applications. The 50-foot length makes it perfect for use on demanding industrial or construction job sites that require wide areas of coverage.

This commercial hose is designed with a special material for on the job reliability with worry-free kink resistance and crush-proof couplings. The hose is covered in an abrasion-proof jacket for high performance use with a powerful burst strength of 400 PSI.

Abrasion-Proof Jacket

Count on years of use and on-the-job reliability with the durable abrasion-resistant jacket on this commercial hose - it's built to stand-up to the toughest industrial applications.

Maximum Water Volume

With its 3/4" diameter, this industrial hose can move water in higher volumes.

Crush-Proof Couplings

With crush-proof couplings affixed to both ends, this heavy-duty contractor hose can withstand damage when working around heavy machinery, making it ideal for industrial and commercial use.

Product description

Only Neverkink hoses guarantee no kinks or tangles, the patented Reflex Mesh technology ensures a hose that's easy to maneuver. Industrial strength couplings are made with lead-free aluminum and are leak proof and crush-resistant, a heavy duty steel coil prevents kinking at faucet. All Neverkink product contains MicroShield, anti-microbial protection, guards against mold and mildew that can cause hose deterioration. The series 4000 NeverKink is flexible to 45 Degree. This hose comes in 5/8th" and 3/4" diameter and is available in 50', 75' and 100' lengths. Made in the USA. Not for Hot Water Use

• Guaranteed Not to Kink or Tangle
• Heavy Gauge Power Coil
• Industrial Strength Lead-Free Aluminum Couplings Leak & Crush-proof
• Contains Microshield to Prevent Mold and Mildew
• Remains Flexible Down to 45 degrees
• This hose is not intended for drinking water use.

User questions & answers

Question:	I bought this and it is so stiff I can't wind it around my holder. Anyone have any ideas how to straighten the hose out
Answer:	I don't know but 3 of them worked fine on a 36 inch heavy front door.
Question:	Is it 3/4" id or od
Answer:	Yes, they are for exterior doors.
Question:	What is the maximum temperature this hose can withstand? Need something that can withstand 160 degrees to frozen solid fluctuations on a daily basis
Answer:	Not really. There are two bearing type inserts visible even in the photo but they don't appear to do much. To avoid the ground up metal problem I take the hinges apart by fastening one side in a vice with a rubber glove to keep the teeth of the vice from scratching the surface then punch out the pin with another hinge pin or a large nail and lube all bearing surfaces with white lithium grease ( Home Depot auto lubricants section) forcing the grease into the hinge pin holes and then slather the pin itself with grease. Reinsert the pin into the assembled hinge, tap it down tight and install it. Amazing how smoothly it will work and prevent wear for a long time. I did all this with these exact hinges. Hint, only take one hinge off the door at a time, and have all three of them lubed in advance.
Question:	When the hose is connected to the faucet, it is troublesome to rotate. Is there a connector that does not need to be rotated
Answer:	They are made of steel with a polished chrome finish. ALL hinges rust over time including stainless steel and brass. However, stainless steel typically holds up the best. These can be used on bathroom doors and are a very popular finish right now. However, they will rust over time.

Product features

Only Neverkink Water Hoses are Guaranteed Not to Kink or Tangle

Teknor Apex was the first US manufacturer to launch a kink-proof hose, which featured a patented technology called NTS (Non-Torsion System). The translucent strip that runs the length of every hose reveals the Neverkink secret which solves the consumer complaint: Kinking.

This Neverkink line offers benefits guaranteed unconditionally–producing a hose that is easy to maneuver so kinks, twists and tangles don’t have a chance to get started.

Neverkink Commercial Pro Water Hose

The patented Reflex Mesh technology utilizes a mesh network of reinforcement so kinks, twists and tangles don’t have a chance to get started. All Neverkink products contain MicroShield antimicrobial protection which guards hose against mold and mildew. Made in the USA.

Patented Couplings and Power Coil

Patented industrial grade couplings are made with high strength, lead free aluminum that will not rust or corrode. Crush-proof up to 1,400 pounds. Heavy gauge flexible power coil strain relief prevents kinking at the faucet.

Made in the USA

All Neverkink hoses are proudly Made in the USA. Engineered with you in mind.

Ultra-Flexible Down to 45 Degrees

Neverkink water hoses are ultra-flexible for easy handling and maneuverability. Remains Flexible Down to 45 degrees. Product is best for tradesmen, landscape professionals, and contractor environments. Great for rigorous every day use. Frequently used with spraying attachments such as nozzles, chemical sprayers, and sprinklers.

Neverkink 9844 Series 4000 Commercial Duty Pro Garden Hose

Made in the USA. Not for Hot Water Use. Product is best for tradesmen, landscape professionals, and contractor environments. Frequently used with spraying attachments such as nozzles, chemical sprayers, and sprinklers.

Made in USA with lifetime guarantee

Available in both 5/8" and 3/4" diameter and 50', 75' and 100 Foot lengths.

Extreme performance guaranteed. The Teknor Apex NeverKink PRO contractor hose is perfect whether you’re a third generation farmer growing a strong harvest or a hands-on contractor building the future brick by brick, one thing remains the same: you need the right tools at the right time. Teknor Apex Neverkink PRO 3/4 In. diameter allows for high flow for applications that require larger volumes of water. This hose is manufactured with a patented anti-kink technology that prevents kinking. Don’t let your hose hold you back from a job well done.

Product description

A premium rubber hose that can take the heat up to 180 degrees. Can be used for hot and cold water applications. Sometimes the right hose is all you need to get the heavy work done. Available in multiple sizes, our Apex USA made hoses are always engineered with you in mind.

From the Manufacturer

Industrial Hot Rubber Hose. 5/8" x 50'. All rubber construction. For hot water use to 180 degrees. 500 PSI.

• Designed to Take the Heat
• All rubber construction for hot (180°) or cold water use
• Rigid sleeve prevents kinking at the faucet
• Leak proof and crush resistant couplings
• Reinforced construction for durability

User questions & answers

Question:	Apex brags about hot water usage, how about 40 degrees or less, will it stiffen and break like all other hoses
Answer:	I believe they are 1/16". They are small enough that it really increases the pressure coming out and cleans really well. I drive offroad quite a bit and get a lot of seed heads, grass fibers and other organic material in my radiators and this is the best solution I have found for getting all of that out of the radiators and keep my truck and other equipment running cool.
Question:	does this kink
Answer:	check out the Radiator Genie. I think that is what you are looking for. It is listed in Amazon
Question:	Is this hose safe to hook to a camper for drinking water
Answer:	No. I wouldn't do that. The cleaner is a liquid solution that is meant to clean and air-dry inside a car's vents. Used in your computer it would likely do some real damage.
Question:	made in china
Answer:	Thank you for submitting your question. InterDynamics A/C Pro Vent&Duct Cleaner will remover the odor caused by the rats, but it will not remove the source. A/C Pro Consumer Care.

Product features

Premium rubber hose

Teknor Apex has been developing new technologies and innovations that change the marketplace since 1924. Our consumer lines of garden and industrial hoses have been so groundbreaking because, at our core, we are a diversified material science company.

All rubber construction for hot (180°) or cold water use

For hot (180°) or cold water use.

Rigid sleeve prevents kinking at faucet.

Leak-proof, SealFast couplings.

Engineered with you in mind

Reinforced construction for durability.

Made in the USA

Proudly Made in the USA. Engineered with you in mind.

Apex 8695 industrial Duty All Rubber Hot Water Hose

This hose is 5/8 inch Diameter and available in 25 and 50 Foot lengths.

A premium rubber hose that can take the heat up to 180 degrees. Can be used for hot and cold water applications. Sometimes the right hose is all you need to get the heavy work done. Available in multiple sizes.

Product description

Made in the U.S.A. the ColorStorm Premium Rubber Hose is molded from quality EPDM rubber, which will not crack, check or separate. Available in bright yellow for visibility. This premium rubber hose resists kinking, coils easily and is flexible to -25 Degree F. It also withstands hot water up to 160 Degree F and has a working pressure of 125 PSI. Crush proof nickel-plated brass couplings complete this quality hose.

• Made in the U.S.A. the ColorStorm Premium Rubber Hose is molded from quality EPDM rubber, which will not crack, check or separate.
• Available in bright yellow for visibility. This premium rubber hose resists kinking, coils easily and is flexible to -25 Degree F.
• This premium rubber hose resists kinking, coils easily and is flexible to -25 Degree F.
• Crush proof nickel-plated brass couplings complete this quality hose.
• Sure-Grip Technology increases comfort

User questions & answers

Question:	Why can I get other colors in 100’ length? Yellow is too bright
Answer:	I can’t see why not.
Question:	Is this is an real 3/4" 'full port' hose, or are the coupling openings smaller than 3/4", like most? Can you stick your pinky finger all the way in
Answer:	Generally I find some hoses Leach things in the interior, lots of brass will leach lead. So its best to call up companies. I am looking to replace my water safe drinking hose which I think is only water safe if you live in an area that doesn't have warm temperatures because when I first turn on my hose it's foamy. I live in Florida so now I'm going to try poses that are also rated as hot water hoses. Hear tap water starts near 70° most of the year, including most of the winter.
Question:	How to get it to coil
Answer:	I use mine for hot water in cleaning deep fryer. It is like a garden hose. I would guess that your could use it for drinking water if that's all you will use it for. Hope this helps Henry
Question:	Will this hose work with hot water
Answer:	Don't know, but they're junk. The threads on the one I purchased were either defective or not standard compatible. It's a shame because it looked like a decent hose, but the connectors are very poor quality. Definitely not brass, some kind of a cheap alloy.

Product features

Dramm Watering Tools - The Professional's Choice

For over 75 years Dramm watering tools have been designed and manufactured to professional grade standards. Greenhouse and nursery growers worldwide use these same tools on a daily basis to produce the crops they take to market. Manufactured with high grade materials to exacting standards and guaranteed for life, now you too can own the professional quality of Dramm.

Nickle Plated Crush Proof Fittings

The machined brass, nickel plated fittings on Dramm ColorStorm Premium hose have walls so thick, they will withstand being run over with a vehicle.

Heavy Duty Rubber construction with Sure Grip technology

Dramm ColorStorm premium hose Is thicker than any other rubber hose on the market. The shape and built in Sure Grip technology make the hose easy to handle and use.

Machined Brass fittings with hydraulic hose style crimp

The machined brass, nickel plate fittings are attached to Dramm ColorStorm premium hose in the same manner that high pressure hydraulic hoses are constructed. this yields a joint that is very strong and durable.

Heavy Duty industrial grade hose

With an over 500 PSI burst rating and a working pressure of 120 PSI, The hot water rated Dramm ColorStorm hose can handle any lawn and garden or industrial duty use.