13 best replace shovel handle

Replacing a shovel handle is a common maintenance task for shovels, spades, trowels, and other hand tools used in gardening, lawn care, and various outdoor activities. Over time, handles can become worn, cracked, or broken, necessitating replacement. Here are the basic steps to replace a shovel handle:

Tools and Materials Needed:

New Handle: You'll need a replacement handle that matches the type and size of your shovel or tool. Handles are typically made of wood or fiberglass.
Screwdriver or Wrench: You may need a screwdriver or wrench to remove any screws, bolts, or rivets holding the old handle in place.
Hammer: A hammer will be used to secure the new handle to the shovel head.

Steps:

Remove the Old Handle: Start by removing the old handle from the shovel head. Depending on the design, you may need to do the following:
- If there are screws or bolts, use a screwdriver or wrench to loosen and remove them.
- If there are rivets, carefully drill them out to free the old handle.
Clean the Shovel Head: After removing the old handle, clean the shovel head to remove any dirt, rust, or debris. A wire brush or sandpaper can be useful for this.
Prepare the New Handle: If the new handle is not pre-drilled, you may need to drill holes in the handle to match the holes on the shovel head where the handle will be attached.Ensure that the holes are aligned properly.
Attach the New Handle: Insert the new handle into the shovel head, making sure it fits snugly. If there are holes in the handle and shovel head, insert screws or bolts through them to secure the handle in place. Alternatively, you can use rivets, which can be set with a rivet gun. Tighten the screws or bolts until the handle is firmly attached.
Secure the Handle: To ensure the handle is securely attached, give it a few firm taps with a hammer. This will help set the handle in place and prevent it from loosening during use.
Finishing Touches: If desired, you can apply a protective coating, such as paint or varnish, to the new handle to help preserve it and protect it from the elements.
Test the Shovel: Before using the shovel for any heavy digging or gardening tasks, give it a few test swings to ensure the handle is secure and comfortable to hold.

Replacing a shovel handle is a relatively straightforward DIY task that can extend the life of your gardening and lawn care tools. By following these steps and using the appropriate tools and materials, you can maintain your shovel in good working condition for years to come.

Below you can find our editor's choice of the best replace shovel handle on the market

WirthCo 12121 1-1/8" Inside Diameter Polypropylene D-Grip Shovel Handle

Based on 36 reviews Check latest price

Product description

D-GRIP Replacement Handle with 1 1/8" Inside Diameter. California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Long Handled Tool Replacement Handle
Large Inside Diameter Of Handle

User questions & answers

Question:	Does it come with screws/bolts
Answer:	It comes with the pods but no seeds
Question:	is there a bolt hole to attach the handle to the shaft
Answer:	No

Product features

Product Description

Excellent quality, heavy duty replacement handle for your snow removal tools and any long or short handled tools

Why replace a perfectly good snow shovel or any other long or short handled tool when the handle breaks? Here is your low cost solution to maximize the life of any handled tool.

Unlike a lot of replacement handles this one is thick walled, rugged and fits almost any hand.

For over 30 years, WirthCo has been a prime manufacturer of practical products for making life easier and safer. All products sold by WirthCo Engineering Inc are carefully manufactured, tested, inspected, checked and packaged by experienced workers.

Shovel D-Type Grip, 1.1-inch Inner Diameter, Replaces Fiberglass D-Type Handle, Used for Digging rake Tool (Black)

Based on 10 reviews Check latest price

Product description

Specification:

Material: PVC

Inner diameter of mounting hole: 30mm / 1.18 inch

Inner diameter of screw hole: 4mm / 0.16 inch

Size: 180 x 108 x 30mm / 7.0 inch x 4.2 inch x 1.1 Inches (length*width*height)

Package content:

1 x shovel handle

Description: 1. Made of PVC material, lightweight and durable, with good mechanical properties.

2. The ergonomic shape makes the grip more comfortable, lightweight, durable and non-slip.

3. It is very suitable for snow shovel, digging rake, etc. It can well protect garden accessories.

4. Installing self-tapping screws in the screw holes on both sides will increase the firmness of the installation. (Before ordering, please make sure that the handle diameter fits the inner size).

It may be scratched during transportation, but it will not affect the use.

[Inner diameter of mounting hole] 3cm / 1.18 inches.
[Total size]-18 x 10.8 x 3cm / 7.0 inches x 4.2 inches x 1.18 inches (L*W*H)
Good mechanical properties, comfortable feel, dual antibodies hot and cold, easy to clean.
The offset handle design allows you to stand higher and reduce the back bend by 30%. Reduce physical burden. Plastic hardware tools shake hands to increase productivity and muscle efficiency; help you work more efficiently and reduce the pressure on your lower back by as much as 15%.
By placing the tool higher on the shaft and standing more straight, muscle strength can be increased. Switch the handle from left to right to get more balance.

User questions & answers

Question:	Is it magnetic
Answer:	No it doesn’t come with a cardboard box.
Question:	where the blade goes into the handle, does it have a metal insert or is it plastic
Answer:	normally you can unlock the small cash box with the key. If you lost the keys, please take a picture for us to show the lock number, then we'll remake a new key for you. Is my answer helpful?
Question:	What's the dimensions and length
Answer:	nope got mine for a 5yr old little boy

uxcell Shovel D Grip Handle, 32mm Inner Dia PVC for Digging Raking Tools Blue

Based on 12 reviews Check latest price

Product description

Specifications:

Material: PVC

Mounting Hole Inner Diameter: 32mm / 1.26-inch

Screw Hole Diameter: 4mm / 0.16-inch

Total Size: 185 x 117 x 38mm / 7.28-inch x 4.6-inch x 1.5-inch(L*W*H)

Package Contents:

1 x Shovel Handle

Descriptions:

1.Made of PVC material which is light and durable, has good mechanical properties.

2.The ergonomic shape makes the grip more comfortable, lightweight and durable and non-slip.

3.Ideal for snow shovel, digging raking tools,etc, good hand protect garden accessories.

4.Installing self-tapping screws on the screw holes on the two sides will increase the firmness of the installation.(Make sure the handle diameter fits the inner size before ordering)

[Mounting Hole Inner Diameter] - 32mm / 1.26-inch
[Total Size] - 185 x 117 x 38mm / 7.28-inch x 4.6-inch x 1.5-inch(L*W*H)
[PVC] - Polyvinyl chloride material shovel handle in black, good mechanical properties
[Easy to Use] - Make sure the end of the shovel fits the mounting hole size, comfortable to use, good replacement for your broken one
[Package Content] - 1 x Fork Shovel Handle

Bruner-Ivory 823-21 48" Long Single Bent Shovel Handle

Bruner Ivory

Based on 47 reviews Check latest price

Product description

Bruner-Ivory 823-21 48" Long Single Bent Shovel Handle

From the Manufacturer

Bent Razor-back style, Eye slotted, 9-1/2'' eye chuck. Fits Razor-back, Razor-lite shovels, as well as most makes of open back shovels (Hollowback Patterns).

This item is Link Shovel Handle 48 " Ash Handle For Bent Razorback Style Hollowback Shovels And Spades Bulk
Used for Handtools & Tool Organizers, Hammers
The product is manufactured in United States
Limit 1 per order
Returns will not be honored on this closeout item

User questions & answers

Question:	Does it fit rice field shovel
Answer:	this is a main battery disconnect. while it would work in my opinion it would be way overkill.
Question:	Does this handle, in fact, come with rivets
Answer:	0.7 pounds
Question:	Is this handle actually bent at the shovel end to conform to the slight sweep in the shovel mounting pocket
Answer:	yes
Question:	how to replace a shovel handle
Answer:	Hi, friend, please contact us(email address: [email protected]) to get the keys.

Supkiir 2 Pack D Shaped Grip Shovel Handle Replacement, 1.26'' / 32mm Inner Diameter Digging Raking Tool Replacement Spades Forks Garden Snow Removal

Supkiir

Based on 6 reviews Check latest price

Product description

Great for replacing the plastic handle that broke on the spade and make the spade easier to handle!

Package:

2*D Shaped Grip Shovel Handle

Specifications:

Material: Polyvinyl Chloride & Plastic

Size: 4.13x7.67 inches/10.5x19.5 cm

Installing Hole Diameter: 1.26inch/32mm

IMPORTANT:

1. Please check the package if it is in a good condition.

2. Our all items are come with 180 days free after-sale service, if you do have any questions please feel free to contact us!

✅ WHAT YOU GET: The package comes with 2 piece D shaped grip shovel handle. Size 4.13x7.67 inches(10.5x19.5 cm). Installing Hole Diameter 1.26inch(32mm).
✅ DURABLE MATERIAL: Made of quality polyvinyl chloride and plastic. Sturdy, not easily break and can last for a long time.
✅ UNIQUE DESIGN: Smooth surface and ergonomic design with non-slip handle that help you save your efforts and time.
✅ IDEAL REPLACEMENT: Fit for most rakes, forks, shovels inner diameter 32mm to replace. Easy to install and reusable.
✅ QUALITY SERVICE: We provide 180 days free replacement, if you have any question about our item please feel free to contact us.

Nupla - 72072 SP2D-E #2 SQ PT Shovel W/D Handle Hollow Back

Nupla Corporation

Based on 42 reviews Check latest price

Product description

Square point shovel for digging in hard-packed soil or environments that require strong force to penetrate
Heavy 16-gauge steel blade for strength and durability with a hollow back and a forward-turned step for secure foot placement
Solid molded D-grip for leverage and control when digging, pushing, or lifting
27" handle with a fiberglass and polystyrene core surrounded by a polypropylene sleeve for strength, durability, and chemical and weather resistance
Blade measures 9-7/8" by 11-1/2"

User questions & answers

Question:	Is the flat one with 27 inch handle a good size to keep in trunk if I get stuck in snow
Answer:	You need a caliper to measure your ball they are very specific it’s universal to any 10mm ball stud
Question:	What is the overall length top to bottom
Answer:	Yes it does. I had kept mine just in case when I ordered this but was happy when it came with the required hardware.
Question:	I have a very large area filled with 1-2" rocks and cat poop. Each scoop will be pretty heavy. Will this shovel be sufficient to handle this job
Answer:	So far as I know, this switch has no memory, it's just an open/close kill switch.

Ames True Temper Green Thumb Long Handle Aluminum Scoop, 48-Inch

Ames True Temper

Based on 25 reviews Check latest price

Product description

Ames True Temper Green Thumb 48-Inch Long Handle Aluminum Scoop. 13-3/4-Inch by 11-1/2-Inch Blade and 48-Inch Handle.

48-Inch Long Handle
13-3/4-Inch by 11-1/2-Inch Blade
Aluminum Scoop

User questions & answers

Question:	How wide is the blade
Answer:	Not sure, I used them for gas charged lifts on a garden storage locker and toy box I made.
Question:	Is the handle wooden
Answer:	The threaded end is a little bigger then 1/4 " so I did not even mess around so I drilled a 5/16 hole!!!

MroMax 2Pcs Shovel D Grip Handle, 32mm/1.26" Inner Diameter PVC Spade Snow Shovel Handle for Garden Digging Raking Tool Red-Black

Based on 29 reviews Check latest price

Product description

MroMax 2Pcs Shovel D Grip Handle Perfect for Small Shovel with Handle

Descriptions:

1.Made of PVC material which is light and durable, has good mechanical properties.

2.The ergonomic shape makes the grip more comfortable, lightweight and durable and non-slip.

3.Ideal for snow shovel, digging raking tools,etc, good hand protect garden accessories.

4.Installing self-tapping screws on the screw holes on the two sides will increase the firmness of the installation.(Make sure the handle diameter fits the inner size before ordering)

Feature:

1. Made from tough, UV stabilized resin

2. Installs in minutes;

3. Switch hands tool seasonally; dig, rake, shovel snow more comfortably

4. Universal fit professional grade for the homeowner or professional.

Technical Parameters:

Brand: MroMax

Material: Polyvinyl chloride

Color: Black(Red)

Total size: 30 x 193mm / 1.18 x 7.6-inch (D*H);

Thickness: 105mm / 4.13-inch/4-1/8"

Mounting Hole Inner Diameter: 32mm / 1.26-inch/1-1/4"

Package included:

2 * Shovel D Grip Handle

【Dimensions】- 1-1/4" Shovel D Grip Handle total size 30 x 193mm / 1.18 x 7.6-inch (D*H);Thickness: 105mm / 4.13-inch; Mounting Hole Inner Diameter 32mm / 1.26-inch
【Material】- Polyvinyl chloride material Shovel D Grip Handle in Black(red), good mechanical properties,The material is really solid.
【Excellent design】- Make sure the end of the shovel fits the mounting hole size, good replacement for your broken one, easy to use and labor saving. dig, rake, shovel snow more comfortably
【Application】- Universal design handle is perfect for rakes, shovels to replace the plastic handle on spade.
【Package Content】- 2 x Fork Shovel Handles

MroMax Shovel D Grip Handle, 32mm / 1.26" Inner Diameter PVC Spade Snow Shovel Handle for Garden Digging Raking Tool Blue 1pcs

Based on 14 reviews Check latest price

Product description

MroMax 1Pcs Shovel D Grip Handle Perfect for Small Shovel with Handle

Descriptions

1.Made of PVC material which is light and durable, has good mechanical properties.

2.The ergonomic shape makes the grip more comfortable, lightweight and durable and non-slip.

3.Ideal for snow shovel, digging raking tools,etc, good hand protect garden accessories.

4.Installing self-tapping screws on the screw holes on the two sides will increase the firmness of the installation.(Make sure the handle diameter fits the inner size before ordering)

Feature

1. Made from tough, UV stabilized resin

2. Installs in minutes

3. Switch hands tool seasonally; dig, rake, shovel snow more comfortably

4. Universal fit professional grade for the homeowner or professional.

Technical Parameters

Product Name: Shovel D Grip Handle

Brand: MroMax

Material: Polyvinyl chloride

Color: Blue

Total size: 32 x 185mm / 1.26 x 7.28-inch (D*H)

Thickness: 115mm / 4.53-inch

Mounting Hole Inner Diameter: 32mm / 1.26-inch

Package included

1 * Shovel D Grip Handle

【Dimensions】- 32 x 185mm / 1.26 x 7.28-inch (D*H); Thickness: 115mm / 4.53-inch; Mounting Hole Inner Diameter 32mm / 1.26-inch
【Material】- Polyvinyl chloride material shovel handle in blue, good mechanical properties,The material is really solid.
【Excellent design】- Make sure the end of the shovel fits the mounting hole size, good replacement for your broken one, easy to use and labor saving. dig, rake, shovel snow more comfortably
【Application】- Universal design handle is perfect for rakes, shovels to replace the plastic handle on spade.
【Package Content】- 1 x Fork Shovel Handles

JCBIZ 32mm Inner Diameter Plastic Spade Handle Shovel D Grip Handle Good Hand Protect Garden Accessories for Snow Shovel Digging Raking Tools

Based on 22 reviews Check latest price

Product description

Specification:

Type: Shovel D Grip Handle

Length: 193mm

Handle width: 105mm

Mounting hole out diameter: 38mm

Mounting hole inner diameter: 32mm

Screw hole diameter: 4mm

Material: PVC

Package includes: 1 x Shovel D Grip Handle

Make sure that the end of the shovel is suitable for the size of the mounting hole, which is comfortable to use and can replace the damaged shovel
Excellent design, easy to use and labor saving
Fine workmanship, no burr on the surface, high quality plastic material, durable
Easy installation, it can be used repeatedly, suitable for: shovel, fork, replacement handle
PVC material, light and durable, with good mechanical properties

Truper MG-PY Replacement Handles for Long D-Handle Shovels 28" (71cm)

Truper

Based on 147 reviews Check latest price

Product description

Replacement shovel handle Classic 'Y', 27-1 / 2 '

QWORK 1-1/8" Inside Diameter Polypropylene Shovel D Grip Handle for Digging Raking Tools

Based on 19 reviews Check latest price

Product description

Feature:

It can fit for the shovel which diameter is1-1/8”

Just insert this handle on the shovel of right diameter. Then your shovel can work well as before.

Package:

1 x Handle

High Quality - Made of high quality polypropylene, this handle is durable and stable.
Specification - It can fit for the shovel which diameter is 1-1/8”
Installation - Just insert this handle on the shovel of right diameter. Then your shovel can work well as before.
Package - Our package incl. one piece of D grip handle.
100% Satisfied Service - Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!