13 best long tree loppers

Product description

Fiskars Pruning Stik Tree Pruner makes it easy to cut high or low with a level of control traditional pruners with exterior ropes can’t match. A long, lightweight pole lets you cut high branches without the hassles and dangers of using a ladder, make low cuts without sore knees from kneeling or back strain from bending and easily reach into dense, prickly shrubs or tight spots. For the reach you need to cut your highest branches, the pole extends all the way to 12 foot and locks securely. The rope-free design means you can use both hands to maximize your power and accuracy, and an easy-to-grip sliding handle makes the pruning action smooth and simple. An actuating ball at the end of the pole lets you reach even farther and still prune with precision, an included 15 inch saw blade makes it easy to take down thicker branches, and the cutting head rotates up to 230 degrees to let you prune and saw at tough angles. The fully hardened, precision-ground blade stays sharp, and a low-friction, rust-resistant coating makes every cut easier.

• Ideal for pruning high branches and reaching tight spaces
• Rope-free design gives you two-handed control and power
• Power-Stroke chain-driven gearing provides maximum cutting power
• Fully hardened steel pruning blade with non-stick coating stays sharp and cuts up to a 1¼" diameter smoothly
• Lifetime warranty

User questions & answers

Question:	What is the wgt of the unit
Answer:	3.8 lb. without the saw. The saw add 0.55 lb.
Question:	How does one operate the shears part of the tool? On other products I see a squeeze handle at the base of the pole. Don't see one here
Answer:	The orange handle on the shaft slides up and down to work the shears. When the pole saw is fully expanded and the orange handle is out of reach, there is real strong nylonish-type cable attached to handle t pull for easy operation of the shears. I find that this gives me more flexibility in my posture which is important when using for extended periods of time. This particular Fiskars tool is awesome = in my opinion the best "medium duty" pole pruner, by far for these reasons. (1) It's FAR LIGHTER than other pole pruners; if you are going to be using a pole saw for more than 15-30 minutes at a time, you're gonna love this model (2) Very sharp, and like all Fiskars tools, the blade is made from quality metal that maintains a nice sharp edge. (3) THIS IS AN IMPORTANT ONE - there is no big "knobby thing or pulley set up on the end; this makes it lighter to use but also allows you to get into tighter spaces for finer detailing. (4) The telescoping mechanism works efficiently and very easily (5) One can position the angle of the shears for cleaner, better quality cuts.. I'm a professional botanist, gardening columnist and gardening instructor, and I highly recommend this pole pruner.
Question:	Where can I get a replacement strap for my Fiskars 9240 telescoping pruning stick
Answer:	I sent them a request for a replacement strap for my 9240 because it frayed at the end entering the pole when fully extended. I also sent a picture. To my surprise they sent me a new one. Not just the strap but a whole new pruner. Now that’s customer service and lifetime warranty at its best. Thanks Fiaksrs
Question:	What is the largest sized branch which can be cut with the pruning shear
Answer:	The pruner blades measure about 1-1/8" apart so it should do up to 1" as stated in the specs. I've cut about 3/4" branches with no issues.

Product features

Versatile Rope-Free Pruner Makes it Easy to Reach High Branches without A Ladder

Fiskar's innovative 9240 telescoping Pruning Stik Tree Pruner makes it easy to cut high or low with a level of control traditional pruners with exterior ropes can’t match. You can cut high branches without the hassles and dangers of using a ladder. In addition, you can make low cuts without sore knees from kneeling. The Pruning Stik will help prevent back strain from bending, and it easily reaches into dense, prickly shrubs or tight spots. The rope-free design means you can use both hands to maximize your power and accuracy, and an easy-to-grip sliding handle makes the pruning action smooth and simple. An actuating ball at the end of the shaft lets you reach even farther and still prune with precision, and the cutting head rotates up to 230-degrees to let you prune at tough angles. The Fiskar's 9240 telescoping version includes a 15-inch saw blade to take down thicker branches. The 9240 tree pruner extends to a full 12-foot. The Fiskars’ 9240 Pruning Stik includes a lifetime warranty.

• CHOPS THROUGH 2” BRANCHES effortlessly. This KING OF LOPPERS will allow for fast removal of dry and woody growth and is the ideal tool for preparatory cuts and cut-to-length work. The lopper is designed and built for professional grade applications and makes cutting dramatically easy through extra leverage and compound action power!
• SHARP HARDENED CARBON STEEL BLADE will stay sharp, even after some heavy use! The low-friction non-stick coated gliding blade make every cut a joyful experience. The tools is easy to use, even for the elderly gardener or if you have arthritic wrists. There’s no cut you can’t make with this KNIGHT'S BLADE! Replacement cutting blades available.
• COMFORT GRIP AND EXTRA LEVERAGE. The rubberized grips on the 22" handles provide comfort and good grip. This longer 30” model will allow you to work with some extra strength and leverage and to efficiently navigate around higher limbs. The ergonomically handles are designed for optimal grip to ease the cutting of any branch.
• COMPOUND ACTION SYSTEM: The compound lever system with multiple pivot points and moving parts increases the force applied to the blades. The compound action blade has multiple moving parts which multiplies the force applied to the blades 3 times!
• ORDER WITH CONFIDENCE. We at TABOR TOOLS stand behind our products. Please don’t hesitate to contact us for support, questions about our products or spare parts you might need.

User questions & answers

Question:	What is the weight of the GG12 Tabor lopper
Answer:	Weighed on a Moultrie Digital Game Scale at 3.6 pounds or 1.6 Kilograms
Question:	Are the handles steel or fiberglass
Answer:	These loppers have steel handles
Question:	Do your knuckles smash together with these pruners? Or is there enough clearance
Answer:	Absolutely NOT! These things totally rock. The mechanical advantage you get with them makes them go through thick branches like a hot knife through butter- even if you are a 5'1" 68 year old lady like me. I have their hedge shears, and they are so good, I bought these. I don't think there is a human alive that would bat their knuckles together with these. As shown, in the photo, the blades are closed. I love Tabor Tools.
Question:	Is this better than the Cindy Lauper
Answer:	While Cindy was a cutting edge artist in her day. She no longer seems as sharp. That being said, it is not fair to compare the two.

Product features

Excellent tool for both green and hard/dry wood

This tool was designed with comfort and functionality in mind, featuring ergonomically contoured grips, innovative mechanisms, and coated blades for a sharper, longer lasting cut.

Because of their design, anvil loppers can often cut thicker branches than bypass. Anvil lopper have one straight blade that cuts as it closes onto a flat edge or ‘anvil’ (think about it like a knife on a chopping board). This makes an anvil lopper an excellent tool for trimming back live wood before making a final, clean cut with bypass loppers.

• GG12A Anvil Loppers are meant for pruning both hard green and dry/woody growth
• Cuts branches up to a diameter of 2”
• Suitable for cut-to-length work
• Suitable for preparatory cuts before making a final, clean cut with bypass loppers.

GG12A - There's no cut you can't make! ​

Compound Action System

The compound lever system with multiple pivot points and moving parts increases the force applied to the blades. The compound action blade has multiple moving parts which multiplies the force applied to the blades 3 times!

A Clean, smooth cut

The anvil mechanism works like this: the upper blade is narrower and sharper. The wide anvil distributes pressure and supports the branch in order to avoid damaging or crushing the bark. A curved head or swiveling anvil provides an easier cutting action close to the joint.

• Dynamic compound action mechanism
• Makes clean cuts with less resistance
• Perfect for cutting tougher, larger and harder branches

Use the comparison chart below to determine which TABOR TOOLS loppers are best suitable to your needs:

Product description

A notch Above.



-YARTTING is a company whose sole focus is to develop the love of gardening and the environment. Plants play a vital role in our environment and YARTTING shows children how interesting and enjoyable planting and growing plants can be



Features:



√ Ergonomic soft non-slip handle.



√ Teflon Protective coating makes pruning lopper durable, not rust and easy to clean.



√ SK-5 Japanese steel blade ensures high hardness and durability.



√ A soft latex gardening gloves to protect your hands during cutting or trimming.



Specification:



Item Type: Gardening Lopper



Blade Material: SK-5 Japanese steel



Extend handle: TPE grip and durable aluminum tube



Product Length : A. Extendsion lopper from 71CM (28inch) to 104CM (41inch).



B. Pruning shears is 8 inch.



C. Latex Gardening Gloves is 9 inch.



D.Maximum cutting: up to 2 inch diameter



E.Suitable for: fruit tree pruning, potted pruning, landscaping,garden works.



The advantages of our tree pruner:



-This anvil lopper is applicable for pruning both green and dry/woody growth branches up to a diameter of 2 inch. This may vary depending on tree species.



-This lopper is designed with comfort and functionality in mind, featuring ergonomic handle that is made of steel tube and TPE grip.



-The cutting blade is made of SK-5 Japanese steel. It allows you to trim branches and saplings effortlessly.



Warm Tips:



-Please wipe the stain on the blades gently after use and brush anti-rust oil on it regularly.



-Please don't use the lopper to prune branches diameter over 2 inch.



-The sharp blade is dangerous for children! Please keep it far away from children.



Package Including:



1 x High-Pderformance Gardening Lopper



1 x Drop-Forged Hand Pruner



1 x 1 Pair Latex Gardening gloves

• 【CHOPS THROUGH 2" BRANCHES effortlessly】The pruning lopper blade made of SK5 steel are fully hardened precision-ground and stays sharp even after some heavy use,treated with TELFON surface.Never feel tired after day of gardening work, even for the elderly gardener or if you have arthritic wrists
• 【DUARBLE EXTENSIBLE ALUMINUM HANDLE】The tree trimmer is designed with a extendable rod and both handles that can be adjusted from 28 to 41 inches.It can be easily extended and retracted by 6 steps with a button.
• 【PRECISE PRUNING】This bypass forged pruner offers a large cutting capacity and well-balanced weight for optimal gardening. This high-performance pruner features a wire cutter for small wires and a sap groove to minimize the blade sticking
• 【COMPOUND ACTION SYSTEM】The compound lever system with multiple pivot points and moving parts increases the force applied to the blades. The compound action blade has multiple moving parts which multiplies the force applied to the blades 3 times!
• 【ORDER WITH CONFIDENCE】We at YARTTING BRAND stand behind our products. If you are dissatisfied with hand loppers, please drop us a message and we are certain to give you a full refund.

User questions & answers

Question:	Do both handles extend? And how far
Answer:	Yes,both aluminum handles are extending, from 71CM (28INCH) to 104CM (41INCH).The bigger grip is 7.5 inch! The high-performance of drop-forged pruning is 8 inch.
Question:	Do both handles extend the same distance to 40 inches
Answer:	Yes，both durable aluminum handles extending from 28 inches to 41 inches, and the tube has 6 section telescopic button for any work. And the latex gloves is 9 inch.
Question:	Where is it made
Answer:	Yes, it is manufactured in China but the quality is superior to a comparable product made in the USA.
Question:	Does it offer free return
Answer:	Yes，Customer satisfaction is our utmost priority. If you are dissatisfied with professional loppers, please drop us a message and we are certain to give you a full refund.

Product features

Chops Through 2 Inch Branches Effortlessly

• Cuts branches up to a diameter of 2 inch
• Always get a clean and smooth cut
• Compound action system saves up to 50% of manual exertion by increasing force applied to the blade!

Easy cutting up to 3/4 inch diameter

• Fully heat-treated, forged steel alloy construction bladed designed for the professional gardener
• Anti-slip blade edge holds the branch for precise cuts every time.

Durable Extensible Handle

• Can be adjusted from 28 to 41 inches
• Easily extended and retracted by 6 steps with a button.
• Allows to cuts a higher branches than with regular non-extendable handles.

Lever Drive System

• Non-Stick Smooth Cut & Anti Rust Cutting
• 4-point lever drive technology gives 3X more power on every cut
• Dynamic compound action mechanism and more leverage force.

Drop Forged Pruner

• Offers a large cutting capacity and well-balanced weight for optimal gardening
• Buckle design, reduce the edge of other damage, easy to carry.

Lightweight Aluminum Handles

• Prevents against rust
• lightweight and effectively help you beautify your garden.

Product description

About our pruning loppers:

✦Is it hard for you to cut those branches in height position?

✦Don't worry as our hand lopper features a retractable rod design and help you cut those branches easily.

✦When pruning larger, tougher branches, a confident gardener needs a tool fit for the task. And our pruning shear would be your great garden assistant.

Product specification:

-Total Longth: 27--40inch

-Blade material:SK5 Japan Teflon Coated Blade

-Weight: 1500g

-Trimming diameter: 2''

-Knife material: alloy steel

-Handle material: rubber + plastic

-Telescopic rod material: aluminum alloy

-Suitable for: fruit tree pruning, potted pruning, landscaping,garden works.

The advantages of our tree pruner:

-These anvil loppers are meant for pruning both green and dry/woody growth branches up to a diameter of 2”.

-This pruning shear has been designed with comfort and functionality in mind, featuring ergonomically contoured grips, innovative mechanisms.

-The garden clipper is designed with a telescopic rod that can be adjusted from 27~ 40 Inch.(6 adjustable length)

-The tree limb trimmer blade made of SK-5 material, allows you to trim branches and saplings effortlessly.

-This hand lopper features a thumb release lock button that ensures safety during use.

❤Buy with confidence:

-Customer satisfaction is our utmost priority. If you are dissatisfied with hand loppers, please drop us a message and we are certain to give you a full refund.

• ★SHARP AND DURABLE BLADE★The heavy duty lopper blade made of SK-5 steel straight blade coated with Japan Teflon treatment, fully hardened precision-ground blade stays sharp even after some heavy use, low-friction, rust-resistant, non-stick coating helps ratchet shears glide through wood.
• ★EXTENSIBLE ALUMINIUM HANDLE★ The extendable pruning lopper is designed with a telescopic rod that can be adjusted from 27-40Inch,6 sections telescoping with safety release lock button, ideal for cutting through 2" tree branches effortlessly. which greatly reduces the labor intensity, never feel tired after day of gardening work, even for the elderly gardener or if you have arthritic wrists.
• ★LIGHTWEIGHT AND STURDY★The rod retractable rod is made from aluminum alloy, which prevents against rust and offers you a comfortable gripping feeling. In addition, this pruner features an anti-slip rubber handle, reducing vibration during use. "
• ★WIDE APPLICATION★This lopping shear is suitable for fruit tree pruning, potted pruning, landscaping, allowing you to tackle any heavy duty pruning jobs.
• ★RISK-FREE GUARANTEE★Customer satisfaction is our utmost priority. If you are dissatisfied with hand loppers, please drop us a message and we are certain to give you a full refund.

User questions & answers

Question:	Would these pruning lopper work well to prune a plumeria
Answer:	I have used these on several different shrubs and a Dogwood tree, worked good for them, they cut good. Hopes this helps you.
Question:	Is the tree pruner convenient to operate
Answer:	Yes! It worked well pass my expectations.
Question:	Are the bypass loppers replaceable blades available
Answer:	Yes. Quality equipment!
Question:	Do the tree trimmer handles stay locked in place when extended
Answer:	Sure does. They have push button locks and works very well

Product description

Choose Fiskars Bypass Lopper for smooth, easy cuts on tree branches, comfortable use and lasting value. A fully hardened, precision-ground blade stays sharp, and a low-friction coating helps it resist rust while making every cut even easier. Shock-absorbing bumpers eliminate the jarring conclusion at the end of cuts, and non-slip comfort grips make our lopper easier to grip, carry and maneuver when cutting at awkward angles. In addition, durable steel handles provide lasting strength through heavy use.

The Fiskars bypass lopper is an ideal choice for big cutting tasks. The unit's fully-hardened stainless steel blades are designed to provide a cleaner cut for living, green growth. The blades are also replaceable, and can cut branches up to 1-1/2-inches in diameter. Additionally, the blades' non-stick coating ensures smooth and clean cuts. Durable steel handles feature soft, cushioned grips and a shock-absorbing bumper for all-day comfort.

• Ideal for cutting green, living growth like tree branches
• Fully hardened, precision-ground blade stays sharp through heavy use
• Rust-resistant, low-friction coating helps the blade glide through wood and prevents it from gumming up with sap and debris
• Length: 28 inches with a cut capacity of 1-1/2 inch thick branch

User questions & answers

Question:	What type of warranty is there with these? I have a pair and the handle came apart from the blade. What suggestions do you have for me
Answer:	I dont know anything about the warranty. You might want to ask Amazon customer service. I have done a lot of tree trimming with mine and they have held up great so far.
Question:	Can I use these in a very long battle with honeysuckle? Will they hold up to years of cutting the vine at ground level? I'll be making many many cuts
Answer:	I can't say how long they'd last and I guess how well it would cut your honeysuckle at the base depends on how thick that is, but I've been very happy with the cutting power of the loppers I bought. They don't require a lot of strength to use in proportion to the size of branch they'll cut. I'm very happy with them.
Question:	Can anyone tell me how long the handles are? Thank you
Answer:	The handles are 22" long. I highly recommend this lopper! I had rotator cuff surgery in 2002 and still have to watch stress to the joint. This is a perfect cutter that requires very little effort or extension.
Question:	Where are these loppers made? I hate how amazon doesn't show that many times
Answer:	Made in China. Lifetime warranty from Fiskars home off. Madison Wi. My 8 ft. to 16 ft. Fiskars tree pruner broke. I contacted office. Fed-Xd new $95 pruner to Hawaii. No Charge!

Product features

Cut Branches up to 1-1/2 Inch

Fully hardened, precision-ground, steel blade stays sharp, even through heavy use and cuts branches up to 1-1/2 inch diameter.

Make Comfortable Cuts

Shock-absorbing bumpers help eliminate the jarring conclusion at the end of cuts for more comfortable use.

Guaranteed to Last

Full lifetime warranty.

About Fiskars

Fiskars promotes achievement and self-expression by focusing on easy to use, innovative tools to make gardening, cooking and crafting more enjoyable. The Fiskars brand is part of Fiskars Group, which was founded in Finland in 1649 and has become a leading functional and living products company with a strong brand portfolio including Fiskars, Iittala, Gerber, Wedgewood and Waterford.

Product description

Trim trees and bushes with precision and ease with the Melnor 27-Inch Bypass Lopper and 8. 5-Inch Bypass Pruner Value Pack. This set includes a 27-inch bypass lopper and 8. 5-inch bypass pruner. The pruner easily cuts limbs up to one inch in diameter. The lopper has long, arched handles that put branches within easy reach and cuts up to a 1. 5-inch diameter. Both gardening tools have non-slip cushioned grips that provide a secure, comfortable grasp and help you to cut safely. Built to last, the lopper and pruner set is constructed from titanium-coated steel for rugged blades that stay sharp, cut after cut.

• Power Source Type: Manual

User questions & answers

Question:	You claim that your products are engineered in the Shenandoah Valley of Virginia, but where are the made
Answer:	Our engineering folks are in Virginia and the products are made in factories in china and Taiwan.
Question:	What country are these made in
Answer:	I bought the telescoping looper by this company only, it's made in China and it works great.

Product features

Melnor Talon Series

Whether you live to garden or garden for a living, our Talon series cutting tools can make all your cutting chores easier. Talon products provide the precision, durability and ease of use that you need for a healthy and beautiful lawn and garden, while offering comfort and safety features to make the work easier.

For ease in tree pruning, look to our non-stick coated blades with their easy cleanup – even from hard to remove sap and other residue. We offer cutting tools with a wide choice of blades from forged steel for maximum strength to titanium coatings for the sharpest, longest lasting razor sharp edge.

Product description

The innovative design of our power-lever bypass lopper makes cutting living plants easier while reducing hand fatigue. It features power-lever technology that multiplies your leverage to make cutting two times easier than single-pivot loppers. A razor-sharp, precision-ground blade stays sharp, and a rust-resistant, low-friction coating makes every cut even easier. In addition, this lopper's handles are contoured to fit your hand and include gripease pads to improve grip and reduce hand fatigue. Lopper includes a 1-5/8-inch cut capacity and a lifetime warranty.

• Ideal for cutting thick branches
• Power-Lever technology multiplies leverage to give you up to two times more cutting power than traditional single-pivot loppers
• Fully hardened, precision-ground steel blade stays sharp, even through heavy use
• Maximum cutting capacity: 1-3/4 inch diameter
• Length: 28 Inches

User questions & answers

Question:	Where can I buy replacement handle grips for older models of fisker loppers
Answer:	try your local bicycle shop, take the shears with you, handlebar grips are about the right size, you may have to use a layer or two of tape to match size or search online for handlebar grips.... but then you can't try it on
Question:	does the handles slide out
Answer:	No, the handles are fixed, they are not telescopic like some which always seem to extend on their own, the Fiskars 9138 is a great pruning unit.
Question:	where can I find a replacement blades for this lopper
Answer:	The following link will get you to the replacement blade (Fiskars Lopper item no. 391381-1001) directly from Fiskars http://www2.fiskars.com/Products/Gardening-and-Yard-Care/Gardening-Replacement-Parts/Power-Lever-Lopper-Replacement-Blade2 I went to the site and found that they are currently out of stock. They charge a fixed rate for shipping so you may want to but several blades for $3.99 once they are back in stock. Hope this helps.
Question:	Where can I buy the replacement blades
Answer:	Fiskar.com

Product description

Reach new heights (and lengths) with Corona Tools strength with the Dual LINK Extendable Bypass Lopper with Comfort GEL grip. Dual LINK power-compounding technology makes tree pruning effortless for gardeners and landscapers alike.  This telescoping tree trimmer uses Power SOURCE cutting action for limbs up to 1¾ inches, as well as a patent-pending blade and hook design for ultimate branch-cutting strength. Stay on top of your game season after season with Comfort GEL grip, designed for long-term comfort.  With a Shock GUARD bumper system, strong, trapezoid steel handles and extendable/collapsible handles, these Dual LINK Extendable Bypass Loppers are the ultimate tree trimming tool to get the job done right.

Founded in the early 1920s, Corona is a leader in the marketing and manufacturing of professional and consumer tools for the lawn and garden, landscape, irrigation, construction and agriculture markets. With a retail and distribution network that extends throughout the United States and Canada, Corona’s proven designs, quality manufacturing processes and unparalleled customer service make it the best choice in tools for contractors, agricultural professionals and avid gardeners alike. Limited lifetime warranty.

From the Manufacturer

Founded in the early 1920s, Corona is a leader in the marketing and manufacturing of professional and consumer tools for the lawn and garden, landscape, irrigation, construction and agriculture markets. With a retail and distribution network that extends throughout the United States and Canada, Corona’s proven designs, quality manufacturing processes and unparalleled customer service make it the best choice in tools for contractors, agricultural professionals and avid gardeners alike. Limited lifetime warranty.

• Handles are extendable: extends 27 1/2" To 37 1/2"
• Cuts limbs up to 1 3/4": power Source cutting action
• Durable: strong, Trapezoid Steel handles make for a long lasting tool
• Shock guard Bumper reduces fatigue: comfort gel+ grip for better control.
• Two-zone blade for Small and large cuts: easily cuts branches and limbs.

User questions & answers

Question:	Is the corona sl 4364 duallink a true bypass where both blades cleanly pass each other or are they some sort of hybrid as a customer suggested
Answer:	Yes, the the dual ink is a true bypass where both blades cleanly pass each other. Great cutting tool highly recommend it.
Question:	Does it have a replaceable blade
Answer:	The blade appears to be replaceable
Question:	How far open must handles be for max cuts? The Fiskars I returned required 180 degree spread of handles, not safe when on ladder
Answer:	Thanks for the great question. I checked with our engineering department and the SL 4264 handles open 135 degrees for the maximum cut. Far less than the one's you returned.
Question:	Can I get replacement blade for this
Answer:	I haven''t tried to get a replacement blade. I simply sharpened the current blade on a grinding wheel. I see they sell a small file to sharpen them by hand if you're interested in that. I have no idea if it works well, however.

Product description

Advantage

1. All stakes and rings are made from plastic covered steel, which makes this support sturdy and long-life span.

2. And the clasps are also made from steel, which is better than those plastic clasps and you do not have to worry about the embrittlement of the plastic in the sun.

3. Clasps are movable and hoops can be removed. It is easy to install and you can adjust it easily according to your plant.

4. keeps plants from falling over and helps plants grow better and throughout the growing season.

Material: durable steel with rust-resistant plastic coating.

Dimension: 17” Height; 3 hoops diameter: 7”/ 6.5” / 5.5”

Package Includes:

4 x plant cages

4 x self watering spikes

20 x plant support clips

Tips on self watering spikes installation:

Using a standard bottle with a 1.7 inch diameter opening,either drill or cut holes at bottom of the bottle and place a regulating valve that will adjust the speed of flow.This automatic irrigation device ensures your plants hydrated.

Tips on plant support clips:

These clips can be used as a vine clip to hold orchids, tomatoes, cucumbers, melons, pumpkins, flowers, peppersto prevent them from falling or breaking.

• APPLICATION: Garden Plant Support Cage for growing tomato plants and other climbing fruits, flowers and vegetables, cucumber trellis, efficiently and conveniently to keep your plants growing healthily.
• PERFECT PROTECTION OF PLANTS: Garden Plant Support Cage can well prop up plants to grow uprightly and healthily, prevent plants from falling over or sprawling out, keep them upright and elegant, add aesthetic appeal.
• DESIGNED FOR SMALL PLANTS : Support flowers and leaves growing, avoid to fall and break off, conveniently to keep your plants growing healthily. Pot and plants are not included in the item.
• EASY TO USE:The plant support cages are plastic coated steel stakes, which are very sturdy and durable.
• SIZE AND PACKAGE: Garden Plant Support Cage reaches up to 18 inches, the inner diameter is 5.5”/6.5”/7”. Package includes: 4 x plant support cages , 4 x self watering spikes, 20 x plant support clips.

User questions & answers

Question:	Can the anvil blade be replaced
Answer:	Yes, they are very strong, especially when you extend the handles. I would not try to cut steel, but soft metals it will cut like butter. And the cut limbs extremely well! they seem to be very well made and I hope to get many years of service from them.
Question:	Can these be used to cut other material besides wood like plastic or light metal
Answer:	Don't known about warranty , but as good a pair of loppers I've ever used.I have 11 plud acres they work great,I even bought extra cutting blade for them...
Question:	What is the warranty on these
Answer:	Please wait for about 3 weeks, we will add a listing, please pay attention to our store, we will also send you a notice when the product arrives at the warehouse. thank you.
Question:	Where are parts made and assembled? Thanks
Answer:	Hello dear, According to the seams on both sides of the storage basket, the two sides work together and will fold back to the received pattern. Thanks, Best regards!

• STURDY AND SHARP UPGRADED BLADE: GARTOL HA7934 anvil loppers high-carbon steel blade have been improved. The problem of easy blade breakage has been perfectly solved, can stay super sharp even after a long time. Cutting bushes, hedges and shrubs will be very fast and easily. You can now cut and prune without worrying about the blade bending, breaking or warping.
• EFFORT LESSLY: GARTOL heavy duty lopper is designed and built for professional grade applications and makes cutting up to 2 inch of green wood dramatically easy through extra leverage and compound action power.
• DURABLE PROTECTIVE COATING: Coated with Ilaflon makes pruning lopper durable, not rust, easier to clean and more beautiful.
• ERGONOMIC DESIGNED HANDLES: The pruning loppers specially designed handle is ergonomically. Triangular Iron tube is thickened made, firm, durable and soild enough to withstand powerful forces. The end of the handle has a non-slip silicone casing, which makes your hand work more comfortable and has a stronger grip.
• BALANCED DESIGN: Balanced design makes this anvil lopper a indispensable of garden tools.

User questions & answers

Question:	Is this tool hard to use
Answer:	It has a metal ring around the end of the blower. It could be used to dislodge something small. This is not commercial grade and should not be misinterpreted as same. It is powerful for 30-45 minutes per charge.
Question:	Is this tool convenient to operate
Answer:	Make a loop out of plumbers strap and fasten to wall with screws. Then put nozzle through loop.
Question:	Is it rust proof or regular maintenance
Answer:	Half hour. Should come with the 4ah battery. Has plenty of power.
Question:	can i order extra blades for this tool. if so where
Answer:	Yes.

Product features

SK-5 Blade of High Carbon Steel in Japan

The cutting edge is fine grinding, the incision is smooth and neat, so that the cutting is easy and easy to damage plant branches.

Advanced Composite Structure

A compound lever system with multiple pivot points and moving parts increases the force exerted on the blade so that you can easily prune the thick and sturdy stems, more labor-saving, to protect the shoulders and wrists.

Effective Fixed Structure

With anti slip bayonet, pruning can effectively prevent loosening, pruning is easier and less effort.It is not only simple and convenient to reinforce the screws, but also ensure the long time use.

Product description

Check out the benefits of Gonicc Professional Anvil Lopper:



Compound Action System

- The compound lever system with multiple pivot points and moving parts increases the force applied to the blades.



23" Heavy Duty Handles with Comfort Grip

- The handles of this pruner have a soft grip handle cover for increased comfort and optimum performance. More solid and durable than telescopic handle.



Anvil Blade

- Anvil lopper have one straight blade that cuts as it closes onto a flat edge or 'anvil'



Tips for Gonicc Professional Anvil Lopper:

- Please wipe the stain on the product gently after use and smear Anti-rust oil on it regularly.

- Please don't use the lopper to prune branches diameter over than 2 inch.

- The sharp blade is dangerous for children! Please keep far away from children.



OUR SERVICE

- 100 % Satisfaction Guaranteed.



CLICK ADD TO CART AND ORDER YOURS TODAY!

• 2 Inch Diameter Cutting Capacity - Allow you to cut most of the branches and the lopper is effort-saving also ideal for cutting fresh branches within 2 inch and dried branches within 1.4 inch. Different from other lopper with bent blade only with 1.2 inch diameter.
• SK5 High Carbon Steel Blades - Quality blade made of high carbon SK-5 steel. SK5 carbon steel blades are ultra strong, sharper and stays sharper than your ordinary blade and lasts even longer! No more worrying about a pruning lopper blade that might become dull after just a few cuts.
• Durable And Ergonomic Handle - Made of stainless steel and rubber, the non-slip handle is of high quality, Ergonomic designed make it more stable and durable, giving you better hand comfort.
• Multi-use - The lopper is perfect for cutting and trimming branches, bushes, hedges,shrubs, lawns and so on, making gardening a easily activity.
• Durable and Stable - The high-quality construction ensures that the products will last you for years to come.

User questions & answers

Question:	Will this cut pine tree limbs
Answer:	Yes it will, I trimmed the lower limbs of a jack pine. The cutting blades are quite sharp and the handles are long, very sturdy and light weight.
Question:	need replacement blade for gonicc 30"anvil loper, where can I purchase one
Answer:	I would suggest that you call or email the company about the replacement blade.
Question:	Where made these made
Answer:	Don't know - item not marked other than main blade that bears name of company - Gonico.
Question:	Why does it show loppers but all the reviews are for shears? Is this some kind of review scam
Answer:	They are hand held outdoor shears.

Product description

The first time you try Fiskars PowerGear Super Pruner/Lopper, you’ll be amazed — but it’s not magic, it’s gears. Fiskars patented gear technology multiplies your leverage to give you up to three times more power on every cut. This means you can power through thick branches that you wouldn’t be able to cut with traditional pruners and loppers. It also means that Fiskars Super Pruner can be smaller and lighter than other loppers, reducing strain on your hands, wrists and muscles when you’re reaching to cut a branch or have a lot of branches to cut. Like many of Fiskars PowerGear tools, our Super Pruner has won the Ease-of-Use Commendation from the Arthritis Foundation. But it’s not just for people with arthritis — it’s for anyone who appreciates tools that make work easier

The small and lightweight Fiskars 15-inch PowerGear anvil lopper provides plenty of leverage and strength for most small shrub and tree pruning jobs around the yard. The tool has a 1-1/4-inch cutting capacity and a unique PowerGear design that maximizes leverage for easier cutting. The handles are made of strong reinforced nylon, and the blade features rust-resistant stainless steel, ensuring a long life of service. Weighing only 13-ounces, the lopper is an ideal choice for the weekend gardener who wants to conserve strength for other pursuits. The unit comes with a limited 10-year warranty.

• PowerGear patented gear technology multiplies leverage to give you up to three times more power on every cut
• Powers through thick branches that traditional loppers and pruners can’t
• Makes cutting dramatically easier than it is with other tools, earning the Ease-of-Use Commendation from the Arthritis Foundation
• Maximum cutting capacity: 1-1/4 inch diameter
• Lifetime warranty

User questions & answers

Question:	I have pair of loppers but the blade needs to be sharpened,how does one sharpen
Answer:	Can be done with a dremmel tool with a small grinding wheel. A small sharp flat file, a hand knife sharpening stone, or other similar tools
Question:	What country is this made
Answer:	Taiwan. We have our original one, it was made in Finland. Looks the same but time will tell if it is as good. Original one is more than 15 yes old. Hope this helps.
Question:	How heavy are these loppers
Answer:	Not really heavy at all
Question:	Where can one get replacement blades assuming that blades are replaceable
Answer:	I just got a brand new replacement set after going to the Fiskars website product page and clicking on Warranty Claim. Sent a picture with my claim of the broken blade about 2 weeks ago and forgot about it and was surprised to find some new loppers in my box. I think it would be cool if I could just have 2 or 3 blades on hand, but I guess you can't complain when they do no questions asked replacement. Here's the link to the page as of 10/12/15: http://www2.fiskars.com/Products/Gardening-and-Yard-Care/Loppers/PowerGear-Super-Pruner-Lopper-7972

Product features

Advanced Mechanics

Patented gear technology gives you 3X more power on every cut.

Advanced Blade Design

Premium steel blades are finished with a rust-resistant, low-friction coating. The anvil blade style is best for dry, dead branches.

Guaranteed to Last

Full lifetime warranty.

About Fiskars

Fiskars promotes achievement and self-expression by focusing on easy to use, innovative tools to make gardening, cooking and crafting more enjoyable. The Fiskars brand is part of Fiskars Group, which was founded in Finland in 1649 and has become a leading functional and living products company with a strong brand portfolio including Fiskars, Iittala, Gerber, Wedgewood and Waterford.

Product description

Corona Compound Action Anvil Looper are long-handled pruning shears that require two hands to use, providing additional leverage while making larg cuts. Loppers are useful for pruning hard-to-reach or thorny growth and cutting up discarded branches for the green waste bin.

Founded in the early 1920s, Corona is a leader in the marketing and manufacturing of professional and consumer tools for the lawn and garden, landscape, irrigation, construction and agriculture markets. With a retail and distribution network that extends throughout the United States and Canada, Corona’s proven designs, quality manufacturing processes and unparalleled customer service make it the best choice in tools for contractors, agricultural professionals and avid gardeners alike. Limited lifetime warranty.

From the Manufacturer

Founded in the early 1920s, Corona is a leader in the marketing and manufacturing of professional and consumer tools for the lawn and garden, landscape, irrigation, construction and agriculture markets. With a retail and distribution network that extends throughout the United States and Canada, Corona’s proven designs, quality manufacturing processes and unparalleled customer service make it the best choice in tools for contractors, agricultural professionals and avid gardeners alike. Limited lifetime warranty.

• 1 1/2" CUT CAPACITY: 4 bar compound linkage triples your cutting power.
• 32" DURABLE FIBERGLASS HANDLES: Extra long 8" non-slip foam grips.
• PTFE NON-STICK COATED HIGH-CARBON STEEL ANVIL BLADE: Blade is resharpenable. Blade and anvil are replaceable.
• DESIGNED AND BUILT FOR PROFESSIONAL GRADE APPLICATIONS: Stands up to daily wear and tear, season after season.

User questions & answers

Question:	I have been using a lemon picker with basket although when I really have to reach a lemon and "pull" I lose several flowers. Would this work also
Answer:	I would recommend using BYPASS loppers (such as Corona's WL3351 26" wood handles or SL4150 29" aluminum handles) for a more precise cut if you are trying to avoid flower loss and need the reach of long handles. Corona also manufactures a variety of high quality hand pruners, such as the BP3130, if you want to get even closer to what you are cutting. If you are cutting many lemons off lots of trees, you may also want to consider Corona's Orchard bypass loppers.
Question:	Where manufactured
Answer:	In Answer to your question: "After moving from our 6th Street location early in 2000s, we shut down our forging processes due to increasing economic pressures and built our new manufacturing facility in Mexico. Customers still wanted good quality tools from Corona, however we saw the trend beginning to shift away from those willing to spend more on a tool made in the US in favor of lower-priced tools . We felt the shift in our business and like 90% of US manufacturing, had to look at alternative solutions to maintain our distribution partners and still be competitive in the marketplace. Mexico offered tremendous opportunities to control our product manufacturing processes and brand, while other parts of the world filled in our line for competitive market needs and completeness. The simple answer is no. During the changing economy in the early 2000s, Corona merged with our parent company, Bellota, which has been a family-owned business located in Spain, with over a century of experience in the tool business. It was an ideal partnership for us as they share the same core values as Corona. With our partnership, we are able to increase our purchasing power, buying many of the same parts for our tools, as well as utilize the seven manufacturing facilities located across the globe from our parent company. As family-oriented businesses, we source tools from suppliers throughout the world, never losing site of our commitment to quality. We have earned a reputation among overseas suppliers that are too picky on quality and we will not sacrifice the reputation of our brand which has taken a century to build. Any tool that bears the Corona brand must first exceed our expectation of quality and offer the lasting performance that we expect, season after season.It provides a balance of making quality tools, at competitive prices, within the global economy that we live in today. Corona has been supporting the USA in one way or another since we began in the 1920s. This is just another chapter in our history that has changed over time as we continue to support Americans by providing jobs for those in our plants and providing quality tools that exceeds our users expectations from our brand.
Question:	where is this manufactured
Answer:	Not quite sure, but it’s supposed to be UK product. So far it’s a very good one.
Question:	My cutting task involves cutting branches ranging from 1.5" to 1.75" medium hardness. Will this lopper do the job with ease
Answer:	This anvil lopper is designed to cut branches up to 1.5" in diameter. The anvil blade is best used on dead wood, as the blade and anvil tend to slightly crush the branch as it is cutting. The bypass style blade, or as mentioned in another response, a hand saw, is ideal for cutting larger live branches. My uncle uses this lopper for clearing trails and really likes how easily it cuts. Corona's FL 3460 is the bypass version of this lopper and the SL 4364 is an alternative,that offers a larger cutting capacity. Thanks for the question.

Product features

Replaceable blade and anvil

Blade SKU 3420-1.

Anvil SKU 3420-2.