11 best bypass loppers

Product description

Fiskars PowerGear2 Lopper uses patented technology to multiply your leverage, providing up to 3x more power on every cut. The innovative design includes modified gears and a specially engineered cam mechanism to optimize cutting power in the middle of the cut, where the branch is thickest and you need it most. Additionally, this lopper’s fully hardened, bypass-style steel blade is enhanced with a low-friction coating for smooth cutting, less gumming and rust protection, and the rounded ergonomic handles feature Softgrip for comfort and control.

• Power through branches up to 2 inch thick with a lopper featuring patented PowerGear technology that gives you up to 3X more power on every cut
• Patented design with modified gears and cam mechanism optimizes your cutting power through the middle of the branch, the toughest part of the cut
• Fully hardened bypass-style steel blade includes a low-friction coating for smooth cutting, less gumming and rust resistance
• Rounded ergonomic handles with Softgrip touchpoints enhance comfort and control
• Maximum cutting capacity - 2 inches diameter

User questions & answers

Question:	What is the Weight of this Lopper
Answer:	I think that the weight was listed in the description info. As a male, it is a comfortable weight, but could be a little heavy for a smaller female, especially if working overhead.
Question:	This says "new Model". What is the difference from previous 18" power gear model
Answer:	These are more sturdy. But this Power Gear 2 weighs about twice as much as the original Power Gear. Really disappointing that you can't find the original any more.
Question:	Are the blades replaceable
Answer:	I was able to find and purchase replacement blades for the original PowerGear. Shipping was high so I ordered 5 to save money but with propper care and light filing I have only used 2 after 1yr of heavy business use.Fiskars blades only have a 1/8in blade overlap (allows more cutting capacity) so they must be just slightly sharpened and they work fine. My dad tried to sharpen his chipped blade and took too much off and ruined it.Just don't cut roots in dirt, too dry limbs, chain link fencing, or twist the blade. I find my employees always try cutting roots without properly cleaning them (roots) and it ALWAYS dulls or chips the blades, even if you think it wouldn't. I have to threaten employees to pay for damage and then they treat them better.
Question:	Is this newer model worth $7 more than the prior model ($43 vs
Answer:	The small improvements do make it worth the extra money. This is a highly effective tool that is easy on your hands and back. I would pay more than the listed price using this on fairly large locust branches recently without any problem. This is the best lopper made.

Product features

Advanced Mechanics

Patented gear technology gives you 3X more power on every cut, and our cam mechanism focuses your power where the branch is thickest.

Advanced Blade Design

Fiskars premium steel blades are finished with a rust-resistant, low-friction coating, and improved blade geometry makes cutting in tight spaces easy.

Advanced Comfort and Control

Longer handles offer versatile use, oval-shaped grips improve comfort, and strategically placed Softgrip touchpoints help prevent blisters.

Product description

Choose Fiskars Bypass Lopper for smooth, easy cuts on tree branches, comfortable use and lasting value. A fully hardened, precision-ground blade stays sharp, and a low-friction coating helps it resist rust while making every cut even easier. Shock-absorbing bumpers eliminate the jarring conclusion at the end of cuts, and non-slip comfort grips make our lopper easier to grip, carry and maneuver when cutting at awkward angles. In addition, durable steel handles provide lasting strength through heavy use.

The Fiskars bypass lopper is an ideal choice for big cutting tasks. The unit's fully-hardened stainless steel blades are designed to provide a cleaner cut for living, green growth. The blades are also replaceable, and can cut branches up to 1-1/2-inches in diameter. Additionally, the blades' non-stick coating ensures smooth and clean cuts. Durable steel handles feature soft, cushioned grips and a shock-absorbing bumper for all-day comfort.

• Ideal for cutting green, living growth like tree branches
• Fully hardened, precision-ground blade stays sharp through heavy use
• Rust-resistant, low-friction coating helps the blade glide through wood and prevents it from gumming up with sap and debris
• Length: 28 inches with a cut capacity of 1-1/2 inch thick branch

User questions & answers

Question:	What type of warranty is there with these? I have a pair and the handle came apart from the blade. What suggestions do you have for me
Answer:	I dont know anything about the warranty. You might want to ask Amazon customer service. I have done a lot of tree trimming with mine and they have held up great so far.
Question:	Can I use these in a very long battle with honeysuckle? Will they hold up to years of cutting the vine at ground level? I'll be making many many cuts
Answer:	I can't say how long they'd last and I guess how well it would cut your honeysuckle at the base depends on how thick that is, but I've been very happy with the cutting power of the loppers I bought. They don't require a lot of strength to use in proportion to the size of branch they'll cut. I'm very happy with them.
Question:	Can anyone tell me how long the handles are? Thank you
Answer:	The handles are 22" long. I highly recommend this lopper! I had rotator cuff surgery in 2002 and still have to watch stress to the joint. This is a perfect cutter that requires very little effort or extension.
Question:	Where are these loppers made? I hate how amazon doesn't show that many times
Answer:	Made in China. Lifetime warranty from Fiskars home off. Madison Wi. My 8 ft. to 16 ft. Fiskars tree pruner broke. I contacted office. Fed-Xd new $95 pruner to Hawaii. No Charge!

Product features

Cut Branches up to 1-1/2 Inch

Fully hardened, precision-ground, steel blade stays sharp, even through heavy use and cuts branches up to 1-1/2 inch diameter.

Make Comfortable Cuts

Shock-absorbing bumpers help eliminate the jarring conclusion at the end of cuts for more comfortable use.

Guaranteed to Last

Full lifetime warranty.

About Fiskars

Fiskars promotes achievement and self-expression by focusing on easy to use, innovative tools to make gardening, cooking and crafting more enjoyable. The Fiskars brand is part of Fiskars Group, which was founded in Finland in 1649 and has become a leading functional and living products company with a strong brand portfolio including Fiskars, Iittala, Gerber, Wedgewood and Waterford.

Product description

Reach new heights (and lengths) with Corona Tools strength with the Dual LINK Extendable Bypass Lopper with Comfort GEL grip. Dual LINK power-compounding technology makes tree pruning effortless for gardeners and landscapers alike.  This telescoping tree trimmer uses Power SOURCE cutting action for limbs up to 1¾ inches, as well as a patent-pending blade and hook design for ultimate branch-cutting strength. Stay on top of your game season after season with Comfort GEL grip, designed for long-term comfort.  With a Shock GUARD bumper system, strong, trapezoid steel handles and extendable/collapsible handles, these Dual LINK Extendable Bypass Loppers are the ultimate tree trimming tool to get the job done right.

Founded in the early 1920s, Corona is a leader in the marketing and manufacturing of professional and consumer tools for the lawn and garden, landscape, irrigation, construction and agriculture markets. With a retail and distribution network that extends throughout the United States and Canada, Corona’s proven designs, quality manufacturing processes and unparalleled customer service make it the best choice in tools for contractors, agricultural professionals and avid gardeners alike. Limited lifetime warranty.

From the Manufacturer

Founded in the early 1920s, Corona is a leader in the marketing and manufacturing of professional and consumer tools for the lawn and garden, landscape, irrigation, construction and agriculture markets. With a retail and distribution network that extends throughout the United States and Canada, Corona’s proven designs, quality manufacturing processes and unparalleled customer service make it the best choice in tools for contractors, agricultural professionals and avid gardeners alike. Limited lifetime warranty.

• Handles are extendable: extends 27 1/2" To 37 1/2"
• Cuts limbs up to 1 3/4": power Source cutting action
• Durable: strong, Trapezoid Steel handles make for a long lasting tool
• Shock guard Bumper reduces fatigue: comfort gel+ grip for better control.
• Two-zone blade for Small and large cuts: easily cuts branches and limbs.

User questions & answers

Question:	Is the corona sl 4364 duallink a true bypass where both blades cleanly pass each other or are they some sort of hybrid as a customer suggested
Answer:	Yes, the the dual ink is a true bypass where both blades cleanly pass each other. Great cutting tool highly recommend it.
Question:	Does it have a replaceable blade
Answer:	The blade appears to be replaceable
Question:	How far open must handles be for max cuts? The Fiskars I returned required 180 degree spread of handles, not safe when on ladder
Answer:	Thanks for the great question. I checked with our engineering department and the SL 4264 handles open 135 degrees for the maximum cut. Far less than the one's you returned.
Question:	Can I get replacement blade for this
Answer:	I haven''t tried to get a replacement blade. I simply sharpened the current blade on a grinding wheel. I see they sell a small file to sharpen them by hand if you're interested in that. I have no idea if it works well, however.

• CHOPS THROUGH 2” BRANCHES effortlessly. This KING OF LOPPERS will allow for fast removal of dry and woody growth and is the ideal tool for preparatory cuts and cut-to-length work. The lopper is designed and built for professional grade applications and makes cutting dramatically easy through extra leverage and compound action power!
• SHARP HARDENED CARBON STEEL BLADE will stay sharp, even after some heavy use! The low-friction non-stick coated gliding blade make every cut a joyful experience. The tools is easy to use, even for the elderly gardener or if you have arthritic wrists. There’s no cut you can’t make with this KNIGHT'S BLADE! Replacement cutting blades available.
• COMFORT GRIP AND EXTRA LEVERAGE. The rubberized grips on the 22" handles provide comfort and good grip. This longer 30” model will allow you to work with some extra strength and leverage and to efficiently navigate around higher limbs. The ergonomically handles are designed for optimal grip to ease the cutting of any branch.
• COMPOUND ACTION SYSTEM: The compound lever system with multiple pivot points and moving parts increases the force applied to the blades. The compound action blade has multiple moving parts which multiplies the force applied to the blades 3 times!
• ORDER WITH CONFIDENCE. We at TABOR TOOLS stand behind our products. Please don’t hesitate to contact us for support, questions about our products or spare parts you might need.

User questions & answers

Question:	What is the weight of the GG12 Tabor lopper
Answer:	Weighed on a Moultrie Digital Game Scale at 3.6 pounds or 1.6 Kilograms
Question:	Are the handles steel or fiberglass
Answer:	These loppers have steel handles
Question:	Do your knuckles smash together with these pruners? Or is there enough clearance
Answer:	Absolutely NOT! These things totally rock. The mechanical advantage you get with them makes them go through thick branches like a hot knife through butter- even if you are a 5'1" 68 year old lady like me. I have their hedge shears, and they are so good, I bought these. I don't think there is a human alive that would bat their knuckles together with these. As shown, in the photo, the blades are closed. I love Tabor Tools.
Question:	Is this better than the Cindy Lauper
Answer:	While Cindy was a cutting edge artist in her day. She no longer seems as sharp. That being said, it is not fair to compare the two.

Product features

Excellent tool for both green and hard/dry wood

This tool was designed with comfort and functionality in mind, featuring ergonomically contoured grips, innovative mechanisms, and coated blades for a sharper, longer lasting cut.

Because of their design, anvil loppers can often cut thicker branches than bypass. Anvil lopper have one straight blade that cuts as it closes onto a flat edge or ‘anvil’ (think about it like a knife on a chopping board). This makes an anvil lopper an excellent tool for trimming back live wood before making a final, clean cut with bypass loppers.

• GG12A Anvil Loppers are meant for pruning both hard green and dry/woody growth
• Cuts branches up to a diameter of 2”
• Suitable for cut-to-length work
• Suitable for preparatory cuts before making a final, clean cut with bypass loppers.

GG12A - There's no cut you can't make! ​

Compound Action System

The compound lever system with multiple pivot points and moving parts increases the force applied to the blades. The compound action blade has multiple moving parts which multiplies the force applied to the blades 3 times!

A Clean, smooth cut

The anvil mechanism works like this: the upper blade is narrower and sharper. The wide anvil distributes pressure and supports the branch in order to avoid damaging or crushing the bark. A curved head or swiveling anvil provides an easier cutting action close to the joint.

• Dynamic compound action mechanism
• Makes clean cuts with less resistance
• Perfect for cutting tougher, larger and harder branches

Use the comparison chart below to determine which TABOR TOOLS loppers are best suitable to your needs:

• CLEAN CUTS. This lopper powers effortlessly through 1 3/4" diameter thick branches with a quick chop. The lopper is designed for fast, precise clean cuts that will preserve the health of your plants and trees. Triples your cutting power with unique compound cutting action. This KING OF LOPPER makes pruning dramatically easy!
• SHARP HARDENED CARBON STEEL BLADE will stay sharp, even after some heavy use! The low-friction non-stick coated gliding blade make every cut a joyful experience. The tools is easy to use, even for the elderly gardener or if you have arthritic wrists. There’s no cut you can’t make with this KNIGHT'S BLADE! GG11 Replacement cutting blades available on Amazon.com!
• COMFORT GRIP AND EXTRA LEVERAGE. The rubberized grips on handles provide comfort and good grip. This longer 30” model will allow you the work with some extra strength and leverage and to efficiently navigate around higher limbs. The ergonomically handles are designed for optimal grip to ease cutting of any branch. Overall, this balanced, powerful and dependable tool which will soon become YOUR BEST FRIEND IN THE GARDEN.
• COMPOUND ACTION SYSTEM: The compound lever system with multiple pivot points and moving parts increases the force applied to the blades. The compound action blade has multiple moving parts which multiplies the force applied to the blades 3 times!
• ORDER WITH CONFIDENCE. We at TABOR TOOLS stand behind our products. Please don’t hesitate to contact us for support, questions about our products or spare parts you might need.

User questions & answers

Question:	What country is this made in
Answer:	It is manufactured in China but the quality is superior to a comparable product made in the USA.
Question:	Hello; are the handles solid (ie: fiberglass type) or hollow material
Answer:	Diamond is the hardest material. Therefore they should be plenty capable of sharpening mid grade steel of these loppers
Question:	Do these have a lifetime warranty
Answer:	I use a diamond rod to sharpen loppers, something like this:https://www.amazon.com/Smiths-DRET-Diamond-Retractable-Sharpener/dp/B001910FOAYou only need to sharpen one edge of one side (the cutting side), the other jaw just holds the branches. Look at the cutting jaw and you'll see only one part comes to a sharp edge. Don't sharpen both front and back of the cutting jaw.
Question:	Where are they made
Answer:	Even stainless steel rusts, so it's good clean and oil after each use. Spray alcohol or bleach on the blades to sterilize and prevent spreading bacteria

Product features

Compound Action Bypass Loppers

Both blade and counter blade of the GG11A Bypass Loppers are ground and penetrate into the branch simultaneously. They have a "pulling cut", which means easy, accurate cutting without leaving pressure marks on the wood.

Branches and twigs are cut very close to the trunk, which prevents cones that hinder the flow of sap. The length of the tool affects the amount of leverage you have – longer loppers give you more leverage, making it easier to cut through thicker branches.

GG11A - There's no cut you can't make! ​

Compound Action System

The compound lever system with multiple pivot points and moving parts increases the force applied to the blades.

Product description

The Corona Bypass Lopper with ComfortGEL grip is the lightweight pruning tool built for comfortable cutting. Smaller grip sizes and tactile handles deliver comfort to gardeners who seek an easier, more therapeutic experience. This lopper comfortably gets the job done.

• Comfort GEL soft, ergonomically shaped grips for maximum comfort, fit and control
• Integrated Shock-Guard bumpers reduces strain and fatigue
• Specially coated, non-stick blades helps maintain maximum sharpness
• Enhanced cutting performance with Dual Arc blade design with a 1-1/2-inch cutting capacity
• 25-inch extra strength, trapezoidal steel handles

User questions & answers

Question:	How is it extendable when only one of the grips extends? I mean wouldn’t that mean your other hand won’t reach
Answer:	Both grips extend equally. Picture only shows one extended. Notice the black and orange couple on each sleeve, the one on the left hasn't been extended.
Question:	Is corona an american company? are these loppers american made
Answer:	Yes. The company is American but moved to Mexico over 6 years ago. I don't know if they moved back but all in all it is still an American company.
Question:	Where do you order replacement bumpers
Answer:	My go to place is amazon
Question:	Made in China
Answer:	Some are made in China just like Crest toothpaste made in China, Mexico and 37 other countries. I personally don’t want to buy anything from China ever again. This tool is Assembled in corona California. About 90% of GM cars are made in China and Mexico. This needs to change.

• POWER THROUGH 1.25" diameter thick branches with a quick chop and without struggle. This bypass lopper is designed for making fast and precise cuts that will preserve the health of your plants. PRUNING MADE EASY!
• COMFORT GRIP WITH SHOCK GUARD. The rubberized grips on handles provide comfort and good grip. This longer 28” model will allow you the work with some extra strength and leverage and to efficiently navigate around tough limbs. The ergonomically 22-Inch handles are designed for optimal grip to ease the cutting of any branch. In addition, the shock-absorbing bumper stop all jarring vibrations and reduce arm and shoulder fatigue.
• SHARP AND STURDY. The fully hardened carbon steel blades will stay super sharp, even after some heavy use! Low-friction coated gliding blade can be re-sharpened which will prolong item's life! Overall, this is a lightweight and balanced tool which is easy to carry, even for the elderly gardener.
• EASY STORAGE: You can simply hang the lopper up side using the hole in the handles.This lopper will soon become YOUR BEST FRIEND IN THE GARDEN.
• ORDER WITH CONFIDENCE. We at TABOR TOOLS stand behind our products. Please don’t hesitate to contact us for support, questions about our products or spare parts you might need.

User questions & answers

Question:	Can I cut a limb that is 2 inches in Dia. with these loppers
Answer:	Real
Question:	Has anyone measured the actual length of this "30 inch looper"(gl16a) ? no matter how hard i try it is still only 28 inches
Answer:	The color is indeed teal. Great hose
Question:	Where are they made
Answer:	It is not rated for drinking water. It is also fairly light duty, and mine herniated and sprung a leak within the 1st 9 months of use. Lots of better options available.
Question:	I bought the 20 inch loppers but they aren't long enough. how much more do the 30" loppers weigh? what's the difference between the gl 16 and the gg
Answer:	It’s a standard 3/4” hose connection. It’ll fit your house faucet.

Product features

Designed to make an impact

28" Handles with Comfort Grip

The handles of this pruner have a grip handle cover for increased comfort and optimum performance. Features hole for easy storage.

Great Cutting Capacity

This bypass loppers has a blade that sweeps past the lower jaw, like scissors. A bypass pruner or lopper is reserved for cuts that affect the health of the plant, allowing the tree to heal quickly.

• 28-Inch long
• Hardened, razor-sharp, precision-ground bypass blade
• Easy to carry and you can keep it in your car or with your camping outdoor gear.
• Non-stick blade coating reduces friction to make cutting easier, and holds item sharp for long lasting value.

Please see our comparison chart, to determine which lopper is best for you:

TABOR TOOLS Loppers

If you love gardening, you'll want the best possible tools for every garden task. We offer powerful, dependable and efficient tools, that will soon become your best friends in the garden.

The powerful appearance in colorful red and black make sure to leave a strong lasting impression. Our ambition is to supply our customers with lasting products outstanding for their functionality & design. Our customers can depend on quality garden and landscaping tools year after year.

In picture : TABOR TOOLS GG11A Bypass Loppers and GG12A Anvil Loppers

Product description

The innovative design of our power-lever bypass lopper makes cutting living plants easier while reducing hand fatigue. It features power-lever technology that multiplies your leverage to make cutting two times easier than single-pivot loppers. A razor-sharp, precision-ground blade stays sharp, and a rust-resistant, low-friction coating makes every cut even easier. In addition, this lopper's handles are contoured to fit your hand and include gripease pads to improve grip and reduce hand fatigue. Lopper includes a 1-5/8-inch cut capacity and a lifetime warranty.

• Ideal for cutting thick branches
• Power-Lever technology multiplies leverage to give you up to two times more cutting power than traditional single-pivot loppers
• Fully hardened, precision-ground steel blade stays sharp, even through heavy use
• Maximum cutting capacity: 1-3/4 inch diameter
• Length: 28 Inches

User questions & answers

Question:	Where can I buy replacement handle grips for older models of fisker loppers
Answer:	try your local bicycle shop, take the shears with you, handlebar grips are about the right size, you may have to use a layer or two of tape to match size or search online for handlebar grips.... but then you can't try it on
Question:	does the handles slide out
Answer:	No, the handles are fixed, they are not telescopic like some which always seem to extend on their own, the Fiskars 9138 is a great pruning unit.
Question:	where can I find a replacement blades for this lopper
Answer:	The following link will get you to the replacement blade (Fiskars Lopper item no. 391381-1001) directly from Fiskars http://www2.fiskars.com/Products/Gardening-and-Yard-Care/Gardening-Replacement-Parts/Power-Lever-Lopper-Replacement-Blade2 I went to the site and found that they are currently out of stock. They charge a fixed rate for shipping so you may want to but several blades for $3.99 once they are back in stock. Hope this helps.
Question:	Where can I buy the replacement blades
Answer:	Fiskar.com

Product description

The first time you try Fiskars PowerGear Lopper, you’ll be amazed — but it’s not magic, it’s gears. Fiskars patented gear technology multiplies your leverage to give you up to three times more power on every cut. This means you can power through thick branches that you wouldn’t be able to cut with traditional loppers. It also means that our lopper can be lighter than other loppers, reducing strain on your hands, wrists and muscles when you’re reaching to cut a branch or have a lot of branches to cut. PowerGear tools — the perfect choice for anyone who appreciates tools that make work easier.

Cutting-Edge Design

When pruning, the weight of the tool and the position of the hand and fingers can cause tension and stress, resulting in muscle and joint strain. When ergonomics are given prime importance in design, the result is products that require less muscle power and reduce joint strain.

The goal of the Fiskars' design team was to increase power, reduce effort and minimize weight – in short, to make pruning easier. The solution was a totally new gear mechanism that provides maximum leverage near the middle of the cut, when resistance is the greatest. That means a more compact tool can cut with a fraction of the effort required by larger single-pivot tools.

The use of reinforced fiberglass composite materials (FiberComp) allowed for lighter handles to further reduce strain and fatigue while maintaining strength and durability.

Key Features PowerGear mechanism increases leverage to make cutting easier than single pivot loppers Sharp, precision-ground blade edge Fully hardened blade holds sharp edge longer Corrosion-resistant, non-stick blade coating reduces friction to make cutting easier Durable and lightweight aluminum handles Ergonomic handles fit comfortably in your hands Bypass blade for clean cuts of green, living growth Cutting capacity - 2 inch Lifetime warranty

• PowerGear patented gear technology multiplies leverage to give you up to three times more cutting power on every cut
• Powers through thick branches that traditional loppers and pruners can’t
• Makes cutting dramatically easier than it is with other tools
• Maximum cutting capacity: 2 inch diamater
• Lifetime warranty

User questions & answers

Question:	what is collapsed length of handles? and what is extended length of handles? Thanks
Answer:	I find it useful for when you need to be close up to someone. Its a fairly fast lens. Interviews would work well, but if you're doing anything landscape I recommend getting a 50 if since you have a cropped camera. Having both the 50 and the 24 is also convenient. (I just finished a documentary) Have fun and good luck :)
Question:	Are they heavy? I'm 71 years old and have arthritis
Answer:	Any Canon lens with the EF designation will work with the Canon 5D Mark I.
Question:	what is the country of origin on this product
Answer:	The Canon EF 24mm f/2.8 IS USM has better glass and Image Stabilization. It has 11 elements in 9 groups. Whereas, the Canon EF-S 24mm f/2.8 STM has 6 elements in 5 groups and does not have Image Stabilization. The EF-S 24mm lens does have a Stepping Motor though. This causes the lens to focus very rapidly and is especially good for video. This is my best explanation of the price difference between the two lenses.
Question:	Can anyone tell me the difference/ improvement between the powergear and powergear2 models 32 in bypass fiskers loppers.Website is frustrating/useless
Answer:	EF 24mm STM is designed for APSC dlsr. The image circle cannot cover the full-frame sensor and, also it cannot be mounted on full frame dlsr, such as 5d3, 6d. EF 24mm is usm is a full frame lens and it has image stabilization. Definitely, later is better. Which to buy depends on your budget and what camera you have.

Product description

These WilFiks, Gardening Bypass Loppers are an essential tool in your tool kit for perfect results every time. Your garden will be the talk of the town with these bypass pruning loppers. They deliver sharp and smooth cuts for clean results every time. It slices quickly through branches and bushes for faster, prettier and above all healthier landscaping.

About This Product:

- ByPass Gardening Pruning Loppers

- Long Handle

- 25 Inches

- Power Gear Mechanism

- Carbon Steel

- Cut Up To 1.4" Diameter

- Comfortable Design

- Non-Slip Grip Handle

- Easy To Clean & Sharpen

- Shock Absorbing

- Strengthen Trees, Bushes & Shrubs

YOU’LL NEVER NEED ANOTHER SET OF GARDENING LOPPERS.

Strengthen your trees, bushes and shrubs with These WilFiks Gardening Loppers, which are specially designed with hardened steel and gear power mechanism that deliver smooth, sharp and precise cuts every time for clean and professional results. The hardened steel is also very easy to sharpen and since the shears are so durable they won’t become ruined during maintenance. There are very few moving parts with these sheers making them super durable.

TEND TO YOUR GARDEN COMFORTABLELY WITH THESE SPECIALLY DESIGNED LOPPERS.

The comfortable design of these gardening shears make them incredibly easy to work with. They are designed to work well with large or small hands and prevent discomfort, aches, pains and blisters. They are great for use for those who have arthritic hands. If you know someone who loves to garden or works with plants and garden maintenance, these gardening pruning loppers are a thoughtful gift that they will love.

At WilFiks We are committed to producing top quality products that we know you will love. If for any reason you aren’t completely satisfied with your purchase, please contact us so that we can be of assistance.

• ► CUT, TRIM & PRUNE: With these Bypass Loppers, cutting your branches, shrubs, bushes, plants, and trees is easy, thanks to razor sharp Hardened Carbon Steel Blades and Comfortable Grip. Keep your trees and bushes healthy. Great for small and large hands.
• ► DURABLE CONSTRUCTION: The Hardened Steel produces smooth, sharp and even cuts that slices quickly through branches & twigs for faster, prettier and healthier landscaping. The handle is constructed out of the best PP and TPR combined for best abrasion resistance and a longer life.
• ► COMFORTABLE DESIGN: The Non-Slip Grip, Shock Absorbing Ergonomic Shaped Handles are designed for maximum comfort. With Our Gear Power Mechanism cutting branches is 2x easier then other loppers, creating sharp and even cuts. These shears make gardening comfortable so you can enjoy your hobby for hours on end without blisters or calluses. Protects your hand and wrist.
• ► LONG HANDLE: Designed with a 25” Long Handle So you can reach the hard to access areas with ease. The blades and rubberized grips are super easy to clean and require virtually no maintenance. They store easily and safely.
• ► EASY TO USE: Our Bypass Lopper creates sharp even cuts with the clean scissor like cutting action. It can cut up to 1.4" diameter tree branches. The latches won’t jam, You can count on these pruners to deliver superior, long lasting performance and great, sharp results every time.

Product description

Designed for healthy cuts on green, living growth, this lightweight Softgrip Bypass Lopper features shorter handles that make it easy to maneuver when cutting at tough angles. A razor sharp, precision ground blade features a low friction coating that helps it glide through wood and resist rust better than non-treated blades. Softgrip handles help reduce hand fatigue and provide a comfortable grip, shock absorbing bumpers eliminate the jarring conclusion at the end of cuts and steel construction offers durability that lasts. Softgrip Bypass Lopper includes a 1 to 1/2-inch cut capacity and a lifetime warranty.

• Bypass blade design is ideal for pruning green, living growth like tree branches up to 1-1/2 inch
• Shorter handles and a lightweight design offer easy use and excellent maneuverability
• Razor sharp, precision-ground blade makes clean cuts and stays sharp for lasting value
• Rust resistant, low-friction coating helps the blade glide through wood and prevents it from gumming up with sap and debris
• Softgrip handles and shock-absorbing bumpers reduce hand fatigue for more comfortable use

User questions & answers

Question:	So exactly how long are they
Answer:	Exactly as the description says, from tip of blade to bottom of handle 24 inches