11 best plastic adhesives

Product description

Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.

• J-B WELD PLASTICBONDER (Tan): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces. J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more! J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!
• CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure. J-B Weld PlasticBonder set and cure color is tan
• STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI.
• SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Work on battery
Answer:	Might work on the plastic case - but I would not use in contact with battery acid
Question:	Can this be used to fix a small crack in a dashboard
Answer:	Yes! I used it to repair the vacuum
Question:	Will this work on hdpe
Answer:	I used this on a PVC job and it worked well for that, but I mixed it on a plastic lid that was HDPE (#2 recyclable) before applying it. There was some left on the lid, and after it dried, it pealed right off the lid, so I'm not too sure about using this on HDPE.
Question:	I want to bond glass to polypropylene. Does this work? If not any good epoxy that works for this
Answer:	I did not know if the plastic bonder would stick to glass, so I tried it on some empty glass jars and old prescription pill bottles which were made of Polypropylene, (type 5 plastic). I cleaned and sanded both the plastic bottles and the glass jars. I applied the JB Weld Plastic Bonder to one sample and also tried PC-11 Marine Power Epoxy Paste on another, (the jars and bottles were put together bottom to bottom). After they had cured I tried to pull them apart. Both the Plastic Bonder and the Epoxy Paste held with light pulls and twists. Both came apart with a medium/heavy pull. Both the Plastic Bonder and the Epoxy Paste stuck tenaciously to the glass jar, and came off cleanly from the plastic bottle. So it does stick to glass rather well, while holding, but not bonding to the Polypropylene bottle. I would try some on your particular application, (a sample), and see if the medium holding power to the Polypropylene will work for you. The Plastic Bonder was much easier to mix and apply than the Epoxy Paste. The Plastic Bonder cured in about two hours while it took 24 hours for the Epoxy Paste to cure. Both had about the same results as far as the holding power, but the Plastic Bonder when mixed is like a gel, while the Epoxy is a much thicker paste, which means you could use it to fill gaps and holes. It was easy to file/sand the Plastic Bonder after it had cured, the Epoxy Paste could be worked after it had cured, but it was much harder to do so.

Product features

Quick Setting Adhesive

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets to a tan color and cures to a hard, permanent bond.

Additional Benefits

All J-B Weld Syringes have a unique dispensing system allowing customers to re-seal the product, which prevents air from curing the epoxy or adhesive, so they can use it multiple times. J-B Weld also provides a mixing tray and stick in the package so you can get to work right away!

Product description

Features:

Especially applied to small units and resident families

10 times stronger than any other glue pen

Features as non-toxic, permanent, odorless and water resistant,can repair almost anything



3 easy steps, very simple to apply

1. Used advanced technology, glue is environmental safe and passed the EU 174 project non-hazardous testing

2. Quick and supper powered permanent bonding in 5-10 seconds

3. Glue:4ML Density:1.12 Viscosity:1200CPS 1pen with 320 drops

4. Light with special wave length and battery lifespan are 10 hours

How to use:

Gave a gentle squeeze on the tube, and got some of the goopy liquid out onto the seam between the two pieces shined the UV light LED onto the liquid.

1. Use Prep Pad Clean The Bonding Face

2. Apply appropriate glue to cure

3. Harden with the UV light for 5-10 seconds.

Note:



If any question, please feel free to contact our team, we will try best to help.

• Not A Normal Glue,Much Stronger Than Any Other Glue Guaranteed, Fix Other Glue Cannot and You Can Even Build Up Material with It, and That Material is Structually Strong. Magical for Small Parts that Demand Great Strength
• Repair Almost Anything: Plastic,Glass,Wood,Metal,Fabric,Stainless Steel, PVC,ABS,Acrylic,Ceramic And More. From the Precious Jewelry to Multiple Craft Projects with the Lowest Cost
• Creates a Permanent Bond In 5-10 Seconds With the Prep Pad Clean The Bonding Face And Cure&Shape Under The UV Light. The UV Curing is Very Fast and Makes Precarious Repairs Possible Without Difficult Clips and Jigs to Hold a Complex Joint While Glue Dires
• Safe,Non-hazardous Formula,Water Proof and Heat Resistant. Used Advanced Technology, It is also Environmental Safe and Passed the EU 174 Project Testing
• Kit Includes: 1 Glue Pen + 8g Refill+UV Light With Battery. Please Follow the Instruction on the Backside.

User questions & answers

Question:	what type batterydoes it use...is it replacable
Answer:	Battery is not replaceable. Buy a new one.
Question:	will this hold up on a broken false tooth
Answer:	I really don't know for sure. I know it will set up pretty fast, but really does not cure real hard for at least 24 hours. I seen video were the set up and then sand or grind to shape the material to the desired shape. It is suppose to set up fast, but I found it cured really hard after about 12 hours. It might work for you, sure can't hurt, if it does not hold, you will have to remove all the excess by sanding or grinding. Also don't know what the saliva in your mouth will do to the clue over time. Might ask a dentist, what they would use.
Question:	Will it work on bath tub (outside) to hold a plastic moulding
Answer:	It worked for me inside a refrigerator for a shelf and for a tray. I would think it would work to hold plastic molding. Just remember, it is NOT glue. Unless the light can reach it, it will not set up. It must be in an area the light can "see".
Question:	How do I "unglue" this because the item was glued crooked
Answer:	as far is my experience I would intuitively say live with it and be more careful next time

Product description

3M Scotch-Weld Plastic & Rubber Instant Adhesive PR40 is a low viscosity instant adhesive. Our PR100 instant adhesive is formulated to give exceptional performance on difficult-to-bond substrates, such as EPDM, nylon, polypropylene and polyethylene with the use of an appropriate primer. Once applied, the glue is fast handling time and care to keep jobs moving quickly.

• Bonds to a number of substrates, including plastics and rubbers
• Precise application: pinch container for a precise drop or squeeze for a steady bead
• Low viscosity adhesive is easily applied from the bottle
• Strong, durable and long lasting bond on a variety of substrates
• Fast curing to keep projects moving quickly

User questions & answers

Question:	Can this be used for the plastic hinge in a car console? Plastic on plastic
Answer:	I used this to repair the hood on my John Deer Lawn Tractor. I believe the material is ABS. After using the 3M Scotch Weld to stich the 12 individual pcs back together I used body compound on the outer surface sanded and repainted the broken hood. That was in October of 2020. The hood is holding up well. Be aware that I used Scotch weld and Baking soda. See -You tube regarding this method. The baking soda creates an instant strong bond. Wear the proper gloves.
Question:	This product was the result of a search for best ceramic glues. Is it good for antique china repairs
Answer:	Not my first choice
Question:	Would it work on gluing back rubber pads on the nose bridge of plastic frame sunglasses
Answer:	Yes, This glue will be effective in gluing pads onto sunglasses frames. If they are metal, you'd be best off scuffing the metal with sandpaper to ensure adhesion; for plastic this won't be a problem.
Question:	Can this glue be used on hdpe coupling to pvc pipe
Answer:	I wouldn't suggest it. Use PVC pipe glue. It comes in clear as well.

Product features

3M Scotch-Weld Plastic & Rubber Instant Adhesive PR40

3M Scotch-Weld Plastic & Rubber Instant Adhesive PR40 is a low viscosity instant adhesive. The PR100 instant adhesive is formulated to give exceptional performance on difficult-to-bond substrates, such as EPDM, nylon, polypropylene and polyethylene with use of an appropriate primer. Once applied, the glue has fast handling time and cure to keep jobs moving quickly.

Product description

The gorilla super glue gel is an easy-to-use, thicker and more controlled formula great for multiple surfaces and vertical applications. Developed for long-lasting repairs in an instant, the clear glue Dries in 10–45 seconds. This super glue gel is specially formulated to absorb drops, impacts and shocks. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. In addition to its high performance formula, we’ve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. It’s Gorilla tough, every time. Not recommended for use on polyethylene or polypropylene plastic. Service Temperature 65 Degrees Fahrenheit to 220 Degrees Fahrenheit.

• GEL FORMULA: No run control gel formula that is great for use on vertical surfaces
• ANTI CLOG CAP: Helps keep glue from drying out. It's Gorilla tough use after use
• IMPACT TOUGH: Specially formulated for increased impact resistance and strength.
• FAST-SETTING: Dries in 10-45 seconds. No clamping required
• VERSATILE: Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more. Not recommended for use on polyethylene or polypropylene plastic or similar materials

User questions & answers

Question:	Can this be used to repair a car's plastic intake manifold (nylon polymer) ? Is it compatible
Answer:	Hello this is Christopher Stafford of reflections, unfortunately I wouldn’t recommend this item for your particular application. I would recommend Loctite 404. Thanks for your message and interest.
Question:	EPO Foam safe? I have several RC models that are made from EPO and EPP Foam. Would like a quick to repair glue.... Thanks
Answer:	Hello, Gorilla Super Glue Gel is not recommended for use on foam surfaces. If we can be of further assistance, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #315176. Thank you, The Gorilla Glue Company
Question:	Will it glue leather to metal
Answer:	Hello, Gorilla Super Glue Gel will work on leather and metal surface. For smooth surfaces, we recommend roughing the surface to provide a texture for the glue to adhere to. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact and reference case #194392. Thank you, The Gorilla Glue Company
Question:	What's the difference between their super glue gel and their super glue
Answer:	Hello Ryan N.,Gorilla Super Glue Gel is a thicker consistency that is perfect for applications on vertical surfaces. Our Gorilla Super Glue and Gorilla Super Glue Gel will have the same holding power. For further assistance with your application, please contact our Consumer Affairs team at 800-966-3458 or through our website at www.gorillatough.com/contact.Thank you,The Gorilla Glue Company

Product description

Vinyl fab plastic adhesive 1.0oz.. this product is manufactured in Canada. Product belongs to arts, crafts and sewing.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Vinyl, Fabric and Plastic Flexible Adhesive is a clear liquid adhesive formulated for repairing and mending flexible plastics such as vinyl seats, cushions, tarps and outdoor gear. It dries to a transparent and waterproof bond. It will not yellow or go brittle with age or sunlight. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• This product is manufactured in canada
• Flexible adhesive for vinyl, fabric & plastic
• Repair household items such as, shoes, toys, tools and weather stripping
• Bonds paper, glass, leather, wood, fabric, rubber and some plastics. Ideal for repairing seat covers, beach balls, vinyl inflatable mattresses, vinyl upholstery, raincoats and wading pools
• Dries clear for invisible repairs
• Waterproof for interior or exterior applications
• 1-Fluid ounce tube

User questions & answers

Question:	Will this work on polypropylene (pp
Answer:	I have a distinct feel that it will in fact dissolve or melt polypropylene materials. I put some in the bottom of a solo cup so I could paint it onto a canvas patch, and it was breaking down the inside of the cup.
Question:	Will this work for re-attaching the fabric top of my Spenco insole for my jogging shoes? It has lifted off from the rubber bottom. Thanks
Answer:	I don't think it will adhere to the rubber of the sole.
Question:	Would this work to repair a rubber watch band
Answer:	I do not know. It works on the padded seat to my weight bench
Question:	Can this be used to repair a vinyl dock bumper
Answer:	I've used it to repair a torn vinyl weather stripping on a 12 X 12 foot commercial garage door by just doing multiple layers.

Product features

Loctite Vinyl, Fabric and Plastic Repair Adhesive 1-Ounce Tube

Loctite Vinyl, Fabric & Plastic Flexible Adhesive is a clear liquid adhesive formulated for repairing and mending flexible plastics such as vinyl seats, cushions, tarps and outdoor gear.

It dries to a transparent and waterproof bond. It will not yellow or go brittle with age or sunlight.

• Interior or exterior applications
• Easy to use; Invisible repairs
• Long lasting repairs
• Waterproof
• Dries clear; Eliminates unsightly tapes or patches
• Remains flexible; Will not brittle or yellow with age

Product description

Difference Between Super Glue and CA Glue: Super glue, cyanoacrylate, and CA glue are all different names that describe the same instant adhesive. Various user groups adopt different names for them. For instance, woodworkers, model-builders, serious hobbyists and skilled crafting pros use terms like cyanoacrylate adhesive or CA glue. Commercially, most know the adhesive as superglue.



Starbond KE-150 Black Medium CA glue is a flexible, rubber-toughened super glue that dries jet black in color. This black super glue is ideal for hiding imperfections, filling dark voids, and accenting specific areas in your projects. Along with impact and shock absorbing properties, the black CA glue can still be sanded down and polished to a high gloss finish. When infiltrating fractures, pores, and soft material, the adhesive is able to expand and contract with its surrounding malleable environment, preventing cracking. Starbond KE-150 Black Medium CA glue is commonly used to recone speakers, bond hobby RC car tires, woodturning inlays, bonding, and filling knots and voids.

It is important to keep in mind that the colored CA glues have an extended bonding time due to the added rubber compound. Although bonding time is generally 40-60 seconds, it can take much longer to dry when larger volumes of the colored adhesive are applied. For these instances, use of Starbond Accelerator is highly recommended.



Used For:

Accenting designs on spalted wood

Bonding dissimilar materials such as wood, metal, glass and rubber

RC car tires

Speaker Repairbr> Repairing and filling cracks, inclusions, voids, and knots in wood



Compatible With:

oWood

oMetal

oRubber

oLeather

oCeramics

oGemstones

oRocks & Minerals

oCarbon Fiber

oFiberglass

oMost Plastics

• ✅ PREMIUM CYANOACRYLATE SUPER GLUE - LAB TESTED FOR OPTIMAL PERFORMANCE: High performance industrial grade adhesive. Starbond Black Medium Thick CA is used to bond parts, with focus on impact and shock absorbance qualities.
• ✅ EXTRA SUPPLIES: clog-free stopper, and micro-tips for precision. The clog-free stopper has a tiny pin to prevent clogs, and micro-tips provide the perfect extension for tiny cracks.
• ✅ STRONG "BONDING AND FILLING" ADHESIVE: Ideal for spalted wood and burl, hiding imperfections, filling knots, voids, bugholes, and accenting specific areas in your projects.
• ✅ PROPERTIES: Viscosity: 150 cPs (meaning the thickness of the liquid is similar to that of motor oil). Penetrating abilities of up to 0.006" in size.
• ✅ LONG LASTING SUPERIOR SHELF LIFE: Starbond Black CA glues have a shelf life of several years in the cold. Store the bottle under 40°F before AND after use to qualify for our 20 Month Shelf Life Warranty. If the glue does not last, we will provide a 100% refund or replacement.

User questions & answers

Question:	is the same as Stewmac black ca super glue
Answer:	It should hold, its really strong, haven't used for curtain wires though, but have hung really heavy things more than 5 lb.
Question:	Is this food safe after it dries? Can it be used on wooden spools or cutting boards? What are the properties after it dries
Answer:	I do not know what a skateboard trux is so cannot help
Question:	Is this rubbery when it dries
Answer:	They won’t stay attached to brick. I tried and the surface is too rough and porous.
Question:	Does this have good impact resistance like Loctite Black Max
Answer:	I’m doubtful it could even hold up 8 pounds for a sustained period of time, although it may briefly.

Product description

J-B Weld Plastic Weld Epoxy Putty Plastic Weld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. Plastic Weld has a 20-25 minute work life; functional cure occurs in 2-3 hours. Plastic Weld cures to an off-white color, is rated at a tensile strength of 350 PSI. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first. Use on: AutomotiveCeramicFiberglassPlastic/Composite/PVCAnd more Instructions 1. Cut: Remove required amount of putty. 2. Mix: Thoroughly knead putty with fingers to a uniform color. 3. Apply: Press putty firmly to the surface to be repaired. J-B Weld is proudly made in the USA

• J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces. J-B Weld PlasticWeld is designed for DIY plastic repairs on ABS, PVC & CPVC pipes and plastics, auto bumpers and more! PlasticWeld is certified by the NSF and is safe for contact with potable water.
• CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours. J-B Weld PlasticWeld set and cure color is off white.
• PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI. PlasticWeld can withstand continuous temperatures up to 250oF (121oC) and intermittent temperatures up to 300oF (148oC) when fully cured. PlasticWeld does not shrink and can be molded, shaped, sanded, drilled and cut.
• APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
• Bonds instantly

User questions & answers

Question:	Will this product repair broken plastic boat windshield inviisibly
Answer:	will this product repair a broken plastic door handle
Question:	Can it be used more than once, or is thrown away after one use
Answer:	Comes with a resealable cap, I opened mine at least two weeks ago and have still been able to use it (also used on multiple projects during those weeks). Just be careful to replace the cap in the same holes you removed it from or you will mix the two components and seal the lid.
Question:	Will it seal a PVC pipe that has a 1 inch slit? Must hold 75lbs of water press. Would put a rubber patch & 2 pipe clamps over it
Answer:	Yes, it is awesome! I've used it for years! It should work great!!
Question:	Is this product good for the broken plastic frame of eyeglasses? The eyeglasses is broken on the temple leg
Answer:	As an optician for over 30 years, sadly, nothing I've found short of a 2 part epoxy/resin will work...but only .temporarily. plus you'll probably get it everywhere including the lenses. I suggest visiting your local optician. I have tons of discontinued frames and can usually hand-edge the lenses if its a close fit . BTW, its the same with so-called scratch removers for eyeglass lenses:snake oil. hope this helps... John shameless plug follows: glassescontacts.com or FB.

Product features

Epoxy Putty

PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. *After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld has a 20-25 minute work life; functional cure occurs in 2-3 hours. PlasticWeld cures to an off-white color, is rated at a lap shear strength of 600 PSI. Does not adhere to polyethylene, polypropylene, or some other plastics.

Additional Attributes

• PlasticWeld NSF Certified - Safe for contact with potable water.
• PlasticWeld can resist continuous temperatures of 250°F (121°C) and intermittent temperatures of 300°F (149°C).

Product description

681925 Features: -Repairs any plastic guaranteed. -Quick, neat and easy. -No mixing required. -2 grams. Product Type: -Plastic Adhesives. Dimensions: Overall Height - Top to Bottom: -3.81 Inches. Overall Width - Side to Side: -8 Inches. Overall Depth - Front to Back: -0.88 Inches. Overall Product Weight: -0.05 Pounds.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. The Loctite Plastics Bonding System is a two-part cyanoacrylate adhesive that sets in seconds and develops tremendous strength with just one drop. The activator primes hard-to-bond surfaces such as polypropylene and polyethylene. Loctite Super Glue Plastics Bonding System dries clear and sets without clamping. It is resistant to water, most chemicals and freezing temperatures. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Repairs any plastic guaranteed
• Quick, neat and easy
• No mixing required
• 2 grams
• Carded
• Use for repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
• Bonds leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglas, polycarbonate, polystyrene and PVC

User questions & answers

Question:	Will this make a strong bond glueing polyethylene and/or polypropylene to itself
Answer:	I have used this to glue Teflon to itself, I think PE or PP shouldn't be a problem.
Question:	does this bond clear PET plastic
Answer:	Loctite's website says its designed for polyethylene plastics so I would give it a try. Other glues that seem to bond anything to anything are the various GOOP glues and E6000, which I prefer because it isn't so thick. GOOP and E6000 are basically the same type of glue (synthetic rubber based) with the latter being a little easier to work with, especially for small components. Both are made by the same company. But I would try the Loctite glue -- it makes a really strong bond. Be sure to follow the instructions EXACTLY and make sure you put a substantial amount of the activator (contained in the pen component) onto both surfaces and wait 20 seconds to dry before applying the glue component to one of the surfaces and putting the parts together. Hold the two parts together for at least 30 seconds to set/cure.
Question:	Anyone know what the activator is? Can I use the activator with other glues
Answer:	I'm still searching myself--perhaps this will help someone: IF n-Heptane works as an activator to bond plastics, you can buy a pint can of (apparently 100% pure) nHeptane on Amazon for under $14: "BESTINE Solvent and Thinner for Rubber Cement...16 Ounce Can". Amazon's link: https://www.amazon.com/BESTINE-Solvent-Thinner-Rubber-Cement/dp/B004O7HM38/ref=sr_1_1?ie=UTF8&qid=1534190132&sr=8-1&keywords=heptane&dpID=51xQHaC%252BC6L&preST=_SY300_QL70_&dpSrc=srch I would very much like to know if this would work as an activator to bond polyethylene to polypropylene using a glue (such as a super glue, and perhaps others)?
Question:	What is the real difference between loctite epoxy plastic bonder and loctite super glue plastics bonding system with activator
Answer:	The difference is in what you want to bond. Epoxy is a 2 part glue that is mixed in equal parts, it will bond plastics such as ABS, PVC, nylon, and Acrylic which are "NON" waxy plastics. The loctite super glue plastics bonding system is a Cyanoacrylates type glue and can be use on plastics such as polypropylene , HDPE, PE, etc which are a "Waxy" type of plastics.

Product features

Plastic is Hard to Glue

The key to success is our 2 part system with activator to prime the surface prior to gluing plastic together. Works on all plastics including hard-to-bond polyethylene and polypropylene.

Multipurpose Use

Bonds plastics such as Plexiglas, polycarbonate, polystyrene, PVC, polyethylene, polypropylene and polytetrafluoroethylene (PTFE)/Teflon. Plus rubber, leather, cork, paper, cardboard, wood, chipboard, fabric, metal and ceramic.

Simple 2 part system

Priming activator with slanted felt tip prepares plastic surfaces for permanent bonding. One minute after applying activator, use super glue sparingly on one surface, press together and hold for 30 seconds; it develops tremendous strength with just one drop.

Product description

Permatex PermaPoxy 5 Minute Plastic Weld is a structural adhesive designed for general purpose bonding of a wide variety of materials. This weld forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination. A fast curing product with gelling of mixed adhesive in 5 – 6 minutes and fixturing in 9 – 10 minutes, it bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature, with a cream appearance. Gap filling to 0.125 inch, with a permanent strength up to 3500 PSI. Temperature range of -60 degrees Fahrenheit to 250 degrees Fahrenheit, with good chemical resistance and water resistance. NOTE: Will not bond most polyethylene or polypropylene plastics. Permatex offers convenient solutions for a wide range of bonding applications. Available in many packaging configurations, Permatex epoxies are versatile and easy-to-use. From general-purpose to material-specific, Permatex offers a formulation that will work for you.

• Structural adhesive designed for general purpose bonding of a wide variety of materials
• Forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination
• Requires no primers, sets in five minutes at room temperature
• Permanent strength up to 3500 PSI
• Suggested Applications: Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. Use for interior trim, fills cracks, bonds most plastic, bonds plastic to vinyl

User questions & answers

Question:	Will this bond Polyurethane to wood
Answer:	It's a 3 piece paddle so there is a piece with the blade, the blade itself is not removable from the short section of paddle shaft it's on
Question:	Will i need to use some sort of backing tape with this product? repairing atv fender that broke in half
Answer:	No foam in shaft. I have never had my shaft fill with water. Sometimes there’s a hairline crack on the edge of the paddle itself. This would cause the water filling the shaft. I normally just use electrical tape on the edge before I use the paddle for the first time...
Question:	can this plastic welder be sanded and formed for a contour patch exterior pvc trim or is it more of an adhesive
Answer:	Yes, it does float. We have done tests of putting it in the water for over 12 hours. Please make sure it is assembled and does not have any crack so no water is filled inside the paddle. Thanks.
Question:	Does this cure clear, white, or black
Answer:	I HAD TROUBLE TO THEM STICKING TO ANYTHING AND WHEN THEY DID SICK THEY DIDN'T HOLD UP.
Question:	Does this have a strong smell
Answer:	I also received them in a bag and as adhesives, these hooks aren't fakes. They are truly durable and can hold solidly on walls and dry surfaces. So much so you need to be extra careful and slowly pull down the tabs to remove the hooks situated on walls because they can peel off the paint, and I wouldn't apply them on wallpaper though. They are strong enough to hold 12 lbs of items and I'm very satisfied with this purchase. Highly recommend !!!
Question:	will this glue work for small gold pin to plastic for semipermanent use
Answer:	Hello - Thank you for taking the time to leave your review. Only one strip is needed per hook. If you have any additional question, please connect with us directly at 1-800-934-7355 M-F 8am-5pm CT.
Question:	Would this work to seal a small cut on an rain-proof coat
Answer:	1 part plain old vegetable oil + 1 part baking soda - Make a loose paste and use gently rub on sticker gum residue to remove it. Works better than any commercial bottled stuff and is natural!
Question:	Can this be used for plastic
Answer:	I have done this one. So far it’s good and is hanging in there.

Product features

For Smartphone and Tablet Repair

The MMOBIEL B-7000 Glue can be used for many industrial repairs, in which Smartphone and Tablet repair is one of the most well known markets in which the MMOBIEL B-7000 Glue is used. WIth its short drying period and the strong hardening this super strong multi purpose industrial glue is the perfect pick for your Smartphone and Tablet repair.

For Textile and Shoe Repair

Though the MMOBIEL B-7000 Glue is super strong, it also stays super flexible, which is why this adhesive is so great to use for that nasty rubber sole on your shoe that keeps flopping!

Jewelry Repair

Is your expensive golden wedding ring missing its diamond? Not a problem! Just use a small dap of MMOBIEL B-7000 Glue and place the stone back into its socket. Within no time the glue will harden and the stone will set. B-7000 is so versatile that it is the perfect choice for your jewelry repai and bedazzling jobs!

Household Repairs

Wether it's a ceramic pot, reading glasses, or anything else, MMOBIEL B-7000 Glue is the multi purpose glue to use in every household for any repair!

• ★ One Glue To Rule Them All – Glue Masters offers premium quality industrial strength Cyanoacrylate Resin with the strongest bond on the market for your money. With a fast cure and extended shelf life, you can’t go wrong with us!
• ★ A True Quick Fix – Settles in just under 45 seconds, this glue is the epitome of easy. Gently apply a small amount of our Instant Glue, and watch the magic happen. Our well balanced medium (100cps) viscosity offers more control to the user while still giving you a nice even flow to get the job done right without the mess or hassle.
• ★ A Hobbyist's Best Friend – Helping bring your models, puzzles, and more to completion is our goal! Our glue is the model builder’s first pick for a quality clear hold and a flow you can trust with those delicate planes, trains, and boats. Don’t take our word for it, just take a look at our customer reviews and see for yourself!
• ★ Versatility – From building scale models to repairing shoe sole, fabric, wood, and more, we’re THE glue for general household repairs, carpentry and whatever else you need fixed! It’s truly a must have for anyone’s toolbox. Our 2oz container offers you enough fixing power for any job, large or small.
• ★ Warning – Not to use on fabrics or clothing and always ware eye protection, working in a well ventilated area.

User questions & answers

Question:	will this bond fabric to glass
Answer:	The glue comes in three thicknesses....activator in separate spray bottle. Great stuff! Glue on one wood piece...activator sprayed on other....put em together...hold ten seconds...done!
Question:	Could I use this for turquoise inlay in wood
Answer:	Tight bond three,is best,This has very little tensile strength and no flexibility.
Question:	what does cps stand for
Answer:	Best thing is to use gloves, but I've gotten it off with acetone (like for nail polish), and then a good lotion/hand cleaner. Hope this helps!
Question:	Hi! how can the applicator tip be kept clear? and what is the shelf-life - how long before he whole bottle soldifies...? thank you
Answer:	I would think a thinner product will be better. Be careful, though. If the veneer is very dry, it may not still and you may need to use an accelerent. .

Product description

SuperWeld is a specially formulated cyanoacrylate Super Glue that provides a strong, instant bond in just seconds. It works on multiple and hard to bond surfaces. The brush applicator allows for even and pin point surface application.

• SUPERWELD: Is a specially formulated cyanoacrylate Super Glue that provides a strong, instant bond in just seconds. It works on multiple and hard to bond surfaces
• WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project
• EASY TO USE: The brush applicator allows for even and pin point surface application. Bonds in seconds even to the smallest surfaces for all your projects
• FOR ALL YOUR HOUSEHOLD SUPERGLUE NEEDS: Clear Super Weld Glue is ideal for china and glass items, auto accessories, rubber, plastic, vinyl, cloth, metal, rear view mirrors, and much more
• DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond

User questions & answers

Question:	Does this work on ABS plastics
Answer:	Hello Matthew D Scavezze, this SÄKEE paddle board can be transition between the double sided kayak and the T grip。 If there is any problem, just feel free to contact us through Amazon Messages, and we will be always here for you. Have a nice day
Question:	Does it work when gluing plastic to fabric
Answer:	Hello Logan Abbott, thanks for your question. There are four D rings on the middle of the paddle board, and also there are four buckles on the seat which you just attach to the D rings. If there is still problem, just feel free to contact us and we will be always here for you.
Question:	What is this glues bond strength temperature range? there is nothing listed on the companies website or mds, important info to know about it
Answer:	Hello JLHD, the PSI we suggested is 13, if there is any question, please let us know and we will be here for you.
Question:	Is it waterproof
Answer:	With all carbon fiber construction, this paddle works well for hard pulls. I weigh over 200 and paddle for several hours per week and I haven't had any problems. It is carbon fiber so you have to be careful not to scratch or chip the surface because it can be damaged. But it is very sturdy for being very lightweight.

Product features

J-B Weld SuperWeld Adhesive

SuperWeld is a specially formulated cyanoacrylate Super Glue that provides a strong, instant bond in just seconds. It works on multiple and hard-to-bond surfaces. The brush applicator (6g size) allows for even surface application. The precision tip applicator on the 20g size allows for pinpoint surface application.

Additional Attributes:

• Set Time: Instant
• Cure Time: 24 Hours
• PSI: 3000 PSI
• Surface Applications: Metal, Plastic, Wood, Ceramics, Glass, Rubber Leather, and more!
• Use On: Household, Automotive, Crafts, Outdoor Equipment, Toys, Furniture, and more!