13 best bostitch bit sets

Product description

The convenience of a set of precision screwdrivers in one small pocket tool! comes with two double-ended bits. Ideal for toy assembly, battery compartments, eye Glasses, electronics and more. Magnetic bits have non-slip textured surface so they attract and hold small screws; won't crack, slip or peel. Tip sizes: 5/32, 1/8, 1PT, 2PT. Soft, comfortable, bi-material grip.

• The convenience of a set of precision drivers in a one-pocket tool
• Ideal for Toy assembly, battery compartments, eyeglasses, electronics and Cell phones
• Magnetic bits attract and hold small screws
• Soft and comfortable bi-material grip
• Includes screwdrivers

User questions & answers

Question:	Are the bit sizes listed accurate
Answer:	No, it doesn't write.
Question:	Does it write too
Answer:	Yes. When it arrives the bits are on the package. But they do store in the handle. One on each end and a cap over each end. They are also reversible.
Question:	Are the bits stored inside
Answer:	This is a stanley brand.
Question:	Is this from the Stanley brand? Seems like another brand is being sold
Answer:	Have had this machine for 8 years and have used a 15' extention plus the 5' power cord on the machine and have never had an issue

Product description

The Bostitch BTFP3KIT 3-Tool Portable Air Compressor Combo Kit is ideal for interior and exterior finishing and trimming project for a variety of crafts like furniture, cabinets, and staircases. It features a 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered 90 PSI pump, which enables long tool run time with quick recovery. The air compressor features long-life oil-free, maintenance-free pump for convenient use. It has a Bostitch high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less]. At only 78.5 dBA operational noise level it offers you a quiet work environment. The SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8 in. to 2 in.. SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4 in. to 2-1/2 inch. The BTFP71875 heavy-duty 3/8 in. crown stapler drives 3/8 in. crown staples from 1/4 in. to 9/16 in. and 18GA brad nails from 1/2 in. to 5/8 in.. 1/4 in. x 15' PVC air hose with fittings is included. Includes: 1) 6-gallon Pancake Compressor, 1) 18GA 2 in. Brad nailer, 1) 2-1/2 in. 16GA Straight Finish Nailer, 1) Heavy Duty 3/8 in. Crown Stapler, 1) 25' Air Hose.

• CORDLESS AIR COMPRESSOR: The BTFP02012 is at 6 gallons, 150PSI, and 2.6SCFM with a high efficiency motor.
• BRAD NAILER: The SB-1850BN drives 18-gauge Brad Nails from 5/8" to 2" for a wide variety of applications
• STRAIGHT FINISH NAILER: The SB-1664FN drives 1-1/4- to 2-1/2-inch, 16-gauge finish nails.
• HEAVY DUTY CROWN STAPLER: The BTFP71875 drives heavy duty 3/8" Crown staples from 1/4" to 9/16"
• AIR HOSE: 15-foot, 1/4" x 25' PVC air hose with fittings air hose, and fittings offer plenty of length for maneuverability
• WARRANTY: This kit is covered by a 1-year limited warranty for peace of mind

User questions & answers

Question:	How long for pressure to build up on initial start up? Thanks
Answer:	If it's not holding pressure check all connections you may have a loose one.
Question:	If i buy this for my husband, do i need to buy an air hose, and if so, what do i buy? this is all stuff i know nothing about. thank you
Answer:	Air hose and some attachments come with. In the future you may want to get a kit with air gun, tire inflater and changeable fittings.
Question:	Can this be used for roofing
Answer:	It works perfectly to run one roofing gun. I’ve bought two of them and they both could handle the work load perfectly. And to comment on one of these guys replies to your question, He said the compressor would run continuously and burn up” well that’s not only untrue but impossible. You would have to be able to lay 5 square an hour all day long not just an hour or two for it to even be remotely possible to burn up that compressor. Not saying you couldn’t lay 5 square an hour but you can’t do it for several hours straight that’s for sure. I personally have put on 11 bundles per hour for the first 2 hours and the compressor did not run continuously and even if it did it wouldn’t have burnt up. Those specific compressors are designed to click off and on as many times as you can make them do so.
Question:	Can a framing nailer be used on this compressor or just finishing
Answer:	Yes, I run my Hitachi framing nailer off this. Maybe 30-40 .141 x3" nails into dimensional lumber before the compressor kicks on. Could I use a more powerful compressor for framing? Sure. But the weight and cost of this thing are very nice. Would be underpowered for roofing or sheathing applications, though.

Product description

Our Rolling base flooring attachment lets you move quickly through flooring installations without lifting the tool between fastenings. It features tool-free depth adjustment for easy transition between flooring thicknesses, from 1/2 - 3/4 in. This attachment works with all BOSTITCH mallet-actuated flooring tools, including the miiifn, miiifs, BTFP12569, and BTFP12570. Built for everyday usage using long life components for durability and reliability. Non-marring wheels are designed to roll smoothly across all types of flooring materials and finishes.

• Tool-free adjustment for easy transition between flooring thicknesses (1/2 - 3/4 in.)
• Non-marring smooth gliding wheels for productivity
• Built with long-life components for durability and reliability
• Replaces the existing non-marring base plate for quick and easy installation
• Works with miiifs, miiifn, Btfp12569, and Btfp12570

User questions & answers

Question:	will this work with a husky floor nailer
Answer:	The BTFAFOOTG2 was not tested by the manufacturer with that device.
Question:	Does it fits on a numax sfl618 pneumatic
Answer:	Works with MIIIFS, MIIIFN, BTFP12569, and BTFP12570.
Question:	How does it attach to the floor nailer
Answer:	THIS ATTACHMENT WORKS WITH ALL BOSTITCH MALLET-ACTUATED FLOORING TOOLS, INCLUDING THE MIIIFN, MIIIFS, BTFP12569, AND BTFP12570.
Question:	What Models does it fit
Answer:	Yes keep in mind though that these not made to be torquing down huge screws these are good for laptop to keep in your EDC for an emergency. Best I can say is they are perfect for when you say SH$&t if I only could tighten that screw loosen that screw a little. For the price they are great for EDC or BOB bags they are great if you work in IT or similar but they are not designed for heavy duty. As for your Question yes the sizes are accurate....

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Product description

Compact, metal three-hole punch for long lasting durability and reliable performance durable all-metal design delivers superior performance while the precision steel punch heads cleanly punch through up to 12 sheets of paper. Rubber base pad provides stability and desktop protection during use. Easy clean chip tray for maintaining a clean work environment. Punches in standard 3-hole configuration with 9/32” diameter holes. Lifetime limited warranty.

• Punches up to 12 sheets of paper
• Durable, all-metal design
• Easy-to-clean chip tray
• rubber base pad for stability during use
• 3-hole configuration

User questions & answers

Question:	Why is shipping $31.99 for a hole punch
Answer:	Good question. I think the answer is a lot of other vendors overcharge for Starrett products on Amazon. The two and three pack listings are not our company's listings.
Question:	What size hole does the punch make
Answer:	One year according to the Starretthe website. These are much nicer than a HF set.
Question:	Just received this, and i can barely slide one piece of paper in. what am i doing wrong? i removed one shipping clip but do not see a second
Answer:	4 inches
Question:	If I want to punch just one sheet of paper will this device close down far enough to cleanly punch 3 holes all the way through just one pc. of paper
Answer:	It's too late in the day to call Athol. Mass today from the Central Time Zone, but I can tell you this. I am a practicing gunsmith machinist, and the older sets I have seem to have less chromium and vanadium in the alloy, 'cause they stay brighter and seem less prone to bending. This could be though, that they're tempered to a higher temperature. This set is also inscribed with fractional as well as metric sizes and are not accurate, so don't use them as plug gauges. E.G. Inscription is "1/4-6mm", miking reveals 31/128" & 6.12mm and 241.5 thouslandths. Very unlike the Starrett of yesteryear. I know for sure the Krupp foundry was unbolted from German earth and shipped to somewhere in the P.R.C. My last dial caliper had china right on the dial face. Knurling is sharp, and point tips are surface ground, heads are not. My guess is made in China. "1/4"" will stand alone on a pink granite surface plate, but a close look will reveal no lapping. No the old Starrett, but still the best around.

Product features

All-Metal Construction

Boasting a durable, all-metal design, this three-hole punch can stand up to the toughest tasks and provide reliable performance for years to come.

Easy-Clean Chip Tray

Built to catch hundreds of paper chips, this hole punch’s oversized waste compartment is ideal for maintaining a clean work environment. Plus, it easily pops open for quick and hassle-free waste disposal.

Compact Power

Slim and lightweight, this compact hole punch tackles up to 12 sheets of paper while taking up minimal space on your desktop. Its reduced size allows for convenient storage in cabinets and drawers.

Desktop Stability

Featuring a non-slip base, this hole punch won’t slide around while you use it. Its protective rubber design protects your desk surface and won’t leave any marks.

Product description

The B8 Impulse 45 Electric Stapler is the ultimate heavy duty stapler for those who expect nothing but the best. It offers a unique blend superior performance and sophisticated design, suitable for any office. If you frequently have a high volume of stapling work and limited time, then you will absolutely love our Impulse Drive technology that delivers up to 3x faster* stapling speeds. It’s high performance drive system easily and consistently staples up to 45 sheets for a neat professional appearance. Our innovative No-Jam technology puts an end to frustrating, document damaging staple jams. The refill alert light provides a bright visual indicator when it’s time to reload, and our push-button FastLoad magazine means less time reloading and more time stapling so you can finish projects sooner. The integrated suction cup feet make for easy mounting and ultimate stability. Includes with 5000 B8 PowerCrown ¼ Premium Staples. (*Bostitch MINISUITE-BLK)

Assembled Product Dimensions (L x W x H): 8.90 x 3.10 x 6.80 Inches

• 3X FASTER STAPLING SPEED – Bostitch Impulse Drive Technology allows users to immediately remove stacks on paper after the stapler pierces the sheets. No need to wait for the machine to retract like with other electric staplers.
• This is truly a heavy-duty unit and can take on extra large stapling tasks. It uses B8 PowerCrown 1/4 inch (up to 20 sheets) & 3/8 inch (up to 45 sheets) Staples (Full Strip)
• NO JAM TECHNOLOGY eliminates staple jams. All Bostitch staplers are made using high quality processes and materials. This unique technology was developed by Bostitch Engineers specifically for our electric staplers.
• REFILL ALERT LIGHT – No more guessing when your stapler is out of staples. This unit features a light that turns on when your unit is low on staples.
• STAPLE STORAGE COMPARTMENT – If you’re buying an automatic stapler, we know you’re probably stapling quite a bit and going through a ton of staples. That’s why we developed a hidden staple storage compartment, so you don’t have to constantly visit the supply closet to refill.
• EASY PUSH-BUTTON RELOADING – We know your day is hard. Reloading your electronic stapler shouldn’t be. Simply push a button and the magazine pops out to insert a new strip of staples.
• VALUE PACK includes: 5,000 staples and a push-style staple remover stored on top of unit
• TRUSTED BOSTITCH WARRANTY – Our warranty is 7 years and back by a brand you can trust.

User questions & answers

Question:	how do you load staples in B8E electric stapler
Answer:	NOTE: I was puzzled by this same question, trying to use this B8E electric stapler at my school. The stapler was jammed with STANDARD staples so that when the big top button was pushed, nothing moved. Had to unscrew and remove the overall cover to see what was happening, pull the slide out and remove the staples. Standard staples are too wide, but close enough that someone unfamiliar may not notice. Stuck a big note on the stapler to tell others "USE ONLY B8 STAPLES." This problem may mystify those who do not have jammed staplers, since the staple magazine pops out when the button is pushed - unless jammed with Standard staples.
Question:	Is this stapler loud
Answer:	It is loud, but not overly so for the amount of papers that it is stapling. The work environment I am in is not quiet either though.
Question:	Can you use standard staples or just the 1/4 B8 Power Crown Staples? If so, how because I own this stapler and it seems that they don't fit
Answer:	It uses one of these types of staplesStanley Bostitch B8® PowerCrown™ Premium Staples, 3/8"Model: STCR211538 5 - 45 PagesStanley Bostitch® B8® PowerCrown™ Premium Staples, 1/4" Model: STCRP211514 up to 20 Pages
Question:	I would like to know how it staples 1 or 2 pages. Does the staple close so it doesn't catch on other papers with staples in them
Answer:	I owned 1 of these for years. It staples neat and clean on 1 page or 40.I only used the Bostitch premium crown staples and never had any problem.After about 8 years of use the stapler started shooting out a staple every couple of hours so I don't use it anymore. I am thinking of buying another stapler so I will probably buy another one just like it. I loved it.

Product features

Get Impulsive -- Staple More at a Faster Speed

Repetitive stapling doesn't have to be difficult. Made to operate at astounding speed, Impulse Drive Technology delivers fast stapling for any desktop whether it's in a classroom, executive office, or at home. Paired with our No-Jam mechanism, experience smooth and fast electric stapling without any interruptions.

Easier Staple Reloading

When the stapler is empty, the Refill Alert Light illuminates, and with a push of the FastLoad button, quickly refill your stapler with ease.

Faster Electric Stapling

With Impulse Technology, experience faster electric stapling and make every job, from big to small, an easy one

No More Staple Jams

Smooth operation without any staple jam hiccups - enjoy continuous use and effortless performance

Quick & Easy Staple Reload

The refill light alerts you to an empty stapler, while the push-button FastLoad allows you to quickly refill with a full-strip of staples

Staple 2 to 45 Sheets of Paper

Use B8 PowerCrown 1/4-inchstaples (included) for up to 20 sheets, and use B8 PowerCrown 3/8-inch staples for up to 45 sheets

Product description

A sleek design engineered for reliable, everyday performance, the durable electric stapler can be powered by AC adapter or wire-free AA batteries for stapling of 2 to 20 sheets. Depending on setting, choose between an AC adapter for standard desktop use, or 4 AA batteries for on-the-go travel use (batteries not included). Motorized design delivers quiet operation while the extra wide paper lead-in allows for quick positioning, stapling at a 45-degree or 90-degree angle. The Fast Load push-button system makes reloading staples incredibly easy. Non-skid rubber base protects desktop surfaces and provides extra stability. For best results, use with Bostitch Premium Standard Staples (B00006IFMO).

• Can be powered by an AC adapter, or 4 AA batteries (best with Polaroid AA batteries) for wire-free use.
• Motorized design for quiet, reliable use when stapling 2 to 20 sheets
• Extra wide paper lead-in for quick staple positioning
• Fast and easy push-button staple reloading. Magazine Capacity - 105 Staples
• For best results, use with Bostitch Premium Standard Staples (B00006IFMO)

User questions & answers

Question:	ES compatible con grampas
Answer:	Mala Me llegó dañada No sirve
Question:	Does the cord come with it
Answer:	yes, a power cord does come with it. it also can be run by batteries
Question:	Does the AC adapter come with this stapler
Answer:	Not needed it has a regular AC plug which I like! No bulky adapter
Question:	Is this quiet
Answer:	It’s quiet as possible, I’ve never had a opportunity to use it in constant mode, how ever I feel it was well worth the price.

Product features

On Your Desk or On the Go

Plugs into an outlet or runs on four AA batteries for on-the-go use

FastLoad™

Quick and easy push-button staple reloading

Staples 2 to 20 Sheets

Efficient automatic stapling using standard staples

Unique Versatility

Staples at a 45 or 90 degree angle

Product description

Bostitch AB-9051114 Regulator

This part replaces obsolete part #: 9051096

This part is compatible with the following machines:

Bostitch

CAP1560 Type 0 Air Compressor

• Genuine, OEM Bostitch Replacement Part
• Bostitch replacement gauge, part number AB-9051114
• Compatible with: CAP1560 Type 0

User questions & answers

Question:	So my compressor will charge but will not te charge. Could it be this pressure regulator that is bad
Answer:	Max at 120 psi
Question:	What is the max operating PSI for this gauge
Answer:	I don’t think so. I used my old gauge
Question:	Was it suppose to come with guage also
Answer:	The flow is from left to right if you are looking at the gauge with the red knob on top.
Question:	which direction is the air flow when looking directly at the pressure guage with the control knob on top
Answer:	It would not have been tested nor recommended by the manufacturer to work with a Husky floor nailer.

Product description

The BOSTITCH BTFP12569 2-in-1 Flooring Tool drives 15.5ga staples and 16ga cleat nails from 1-1/2" to 2" length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically designed with longer handle and comfortable rubber grip and is lightweight at 10.85 lbs. Low air requirements at 3.7 SCFM. Designed for hardwood and engineered flooring installation, which helps eliminate gaps between flooring boards. For 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring, ready to use out of box. Includes Tool, Mallet, Oil, Wrenches, 1/4" (6.4 mm) air fitting.

• DRIVES: 15.5 GA flooring staples or 16 GA "L inches shaped flooring cleats from 1 1/2 inch to 2 inch length.
• Has pneumatic driving action. Used in hardwood and engineered flooring
• NON MARRING BASE PLATES: For 1/2 inch (12.7 millimeter) through 3/4 inch (19.1 millimeter) flooring.
• ERGONOMIC DESIGN: Has long handle with a comfortable rubber grip.
• INCLUDES: Nailer, Interchangeable Base Plates, Mallet, Wrenches and 1/4 inch (6.4 millimeter) Air Fitting with Dust Cover.

User questions & answers

Question:	can i purchase replacement baseplates
Answer:	the base plate are non marring for 3/4 and 1/2 inch floors. They are made of some type of vey hard and slick plastic. I uses for prefinished 3/4 inch hardwoods. Not sure of your question, but both come with the tool and you will want one of them on when ever you are laying floors depending on the thickness of your floors.
Question:	Description "non-marring base plates" are included. is that the protective foot attachment (m-4) for prefinished floors? not the same item
Answer:	We installed 3" wide by 3/4" solid hardwood maple flooring with it and it worked Awesome !
Question:	is it for solid harwood flooring
Answer:	This tool is intended for the installation of new hardwood flooring, not to repair previously installed flooring, which squeaks, due to warping, or joist sagging. Old flooring will require some other type of repair, such as the use of screws and wood plugs to covers to them, or special ring shank nails.
Question:	Will this stop creaks in an old hardwood floor
Answer:	Used it to put down a large den floor, worked great! Would buy again!

Product description

BOSTITCH BT1335B-1M 1-3/8-Inch 18-Gauge Brads, 1000 per Box

From the Manufacturer

Bostitch 18-Gauge Brad Nail.

• This product is easy to use
• This product is highly durable
• Manufactured in China
• Package Height: 0.4"

Product features

BOSTITCH 18 Gauge Brad Nails, 1-3/8-Inch, 1000 per Box (BT1335B-1M)

These 18 gauge brad nails have a coated finish with a chisel point. For interior use. Use with bostitch tools btfp12233, sb-1842bn, sb- 2in1, sb-1850bn, bt35b, bt50b, bt200k-2, gbt1850k. Fits most 18 gauge brad nailers.

Product description

Sick and tired of your unreliable office stapler?

Small as staplers and staples are, they can be highly disruptive if they don't work properly. Constant jams, uneven clinches, and stiff stapler hinges can seriously affect your work productivity and overall mood in the office.

So, you’re on the lookout for a heavy duty stapler that can keep up with your demanding workload. What you need is an all-round stapler that’s high capacity and easy to handle.

Experience stress-free, high-volume stapling with the Bostitch Office Stapler and Staples Value Pack Set.

Say goodbye to annoying staple jams with our heavy duty office stapler. You can use it to staple up to 40 sheets of paper easily. It makes a fantastic choice for your home office, school, clinic, or workshop.

This Bostitch stapler is compact yet highly versatile. It easily fits in the palm of your hand, so you can use it on a wide range of projects, such as tacking and crafting. You can store it standing or lying on its base, whichever orientation helps reduce the most clutter.

Staple shortages can grind work to a halt. To ensure you have a steady supply, we’re giving you 5000 reliable and sturdy staples. The whole package comes in a sturdy box for easy storage and to help keep it secure during transportation and shipping.

Need more reasons to get this high capacity office stapler? Check out these awesome benefits:

• Can stay in excellent condition even with regular use
• Proudly brought to you by a renowned American company
• Expertly constructed with hard-wearing parts to last for longer
• Great gift idea for students, teachers, office workers, and writers

Work smarter and faster. Add the Bostitch Office Stapler and Staples Value Pack Set to your cart TODAY!

• HIGH CAPACITY STAPLER - Streamline your organization with the black Bostich heavy duty stapler with staples, holds a large full strip of 105 staples, A no jam technology lets you staple bulk, up to 40 pages with ease! That’s 2x more than regular staplers.
• ALL-ROUND STAPLER - Our manual desk stapler opens 180°, which allows effortless crafting or tacking onto walls or bulletin boards. This hand stapler can also stand vertical or horizontal for easy storage.
• STAY TIDY & ORGANIZED - Sort files with less effort with our compact stapler set. It has a flat clinch design to ensure neater and flatter document and paper stacks.
• ERGONOMIC STAPLER DESIGN - With its comfortable grip, this portable handheld Bostitch stapler is a breeze to use. A rubber base adds desktop protection. includes 5000 metal staples.
• 100% SATISFACTION GUARANTEE - Creating office supplies since 1896, Bostitch’s office stapler with staples comes from a long line of premium and strong fastening tools. Get more work done.

User questions & answers

Question:	Where is it made
Answer:	The box says it is made in Taiwan.
Question:	What size of staples does it come with
Answer:	This uses what is referred to as "S" or standard staples. Most staplers found on any desk (unless it is a mini-stapler) uses standard staples.
Question:	I'm trying to figure out why it says it's a value pack. Does it comes with stapes? If it does, how many staples come with it
Answer:	It comes with a whole box of staples but they don't seem to work well in the stapler. I have been using an old box of Bostitch staples we had for years. When we ran out, I tried the staples we got with the stapler and you either can't get it to staple or it suddenly works but that is after pressing hard and sort of shaking the stapler. Frustrating. I hope I can get some new staples that work better from this company.

Product description

Legendary Bostitch B8 PowerCrown staples are crafted for ultimate drive performance. Taking the physical dynamics of staple driving into consideration led our engineers to develop the unique PowerCrown feature. As this crowned (peaked) staple top is flattened during the staple drive, it forces the staple legs outward so they are more fully supported by the stapler magazine throughout the drive. This delivers more stapling force and reduced buckling for maximum penetration. Each full strip contains 210 staples and is constructed from superior quality high carbon wire to reduce buckling and jamming. The finely honed chisel points deliver maximum penetration for maximum sheet capacity. ¼" leg length. 5,000 staple quantity per box.

From the Manufacturer

B8 PowerCrown staples are crafted for ultimate drive performance and designed for use in Bostitch B8E, B8E-Value, B8HC, B8HDP, B8R, B8P (02245), B8RC-FC, B8RC-2G, B8RC, and B8RCB. As this crowned (peaked) staple top is flattened during the staple drive, it forces the staple legs outward so they are more fully supported by the stapler magazine throughout the drive. This delivers more stapling force and reduced buckling for maximum penetration. Staples are constructed from superior quality, high carbon wire to reduce buckling and jamming. The finely honed chisel points deliver maximum penetration for maximum sheet capacity with a 1/4" leg length.

• This delivers more stapling force and reduced buckling for maximum penetration
• B8 PowerCrown staples are crafted for ultimate drive performance and designed for use in Bostitch B8E, B8E-Value, B8HC, B8HDP, B8R, B8P (02245), B8RC-FC, B8RC-2G, B8RC, and B8RCB
• This delivers more stapling force and reduced buckling for maximum penetration

User questions & answers

Question:	Im assuming these would rust? Are there staples that wont rust that fit the plier stapler that these fit
Answer:	I can't tell you. You can try them.
Question:	I need staples stcrp21151/4. in this description says stcr21151/4 without the letter p. will these work
Answer:	I'm not 100% sure, but I don't think so. The B8 stables are for a small desk stapler. I think what you need is for a staple gun. I found these on Amazon: https://www.amazon.com/Stanley-Bostitch-STCR5019-3-8-1M-1000-Pack/dp/B000COXP56
Question:	I have an old Bostitch T5 that has stcr5019 06174 imprinted. I ran out of the Ace power crown staples. Are the b8 powercrown staples compatible
Answer:	Brad - we have two different staples from them - the one your asking about is made in China; the other says made in USA from foreign or domestic steel. Hope this helps .
Question:	Are these made in USA
Answer:	The regulator only regulates the pressure coming out of the tank.

Product description

Stapling up to 40 sheets of paper has never been this much fun! with erosion by Bostitch Office, you can have a great stapler that's small and efficient. With unique flat Clinch technology, you can staple up to 40 sheets with just a normal standard stapler and this small, unique stapler! Glossy half-strip staples up to 40 sheets of paper: 2x more than standard staplers. No-Jam technology eliminates staple jams. Flat clinch design creates flatter and neater stapled paper stacks. Opens 180-degrees for bulletin board tacking or crafting. Stands vertically or horizontally. Non-skid rubber base provides stability and desktop protection. Uses standard staples.

• No-Jam technology eliminates frustrating staple jams
• Opens 180 degrees for tacking or crafting use
• Flat clinch design for flatter and neater paper stacks
• Stands vertically or horizontally for ultimate convenience
• Non-skid rubber base for stability and desktop protection
• Easily staples up to 40 sheets – 2x more than standard staplers

User questions & answers

Question:	Does it use regular staples
Answer:	It takes regular sized staples.
Question:	Does it come with any staples
Answer:	It will certainly do a great job on Boston terriers, but actually, this IS the Bread-Tree model. If you use Italian bread with tough crust and let it dry enough to keep from gumming up your stapler, this beauty will open up and do the job with the greatest of ease. Bread throughout the forest. Staple through the crust to trees with smooth bark. Your children and other wild bread-eaters will love you.
Question:	What size staple does it use
Answer:	Yes. You can initialize the countdown timer to 23 hours, 59 minutes, and 59 seconds. Great for long flights to answer the question, "How much longer do we hafta sit in these cramped seats?"
Question:	How easy is it to staple bread to trees with this stapler
Answer:	I have this same G Shock, and battery died on me after 8 years. I’d say it’s worth it. I recommend 10/10.

Product features

40 Sheet Capacity

Stapling up to 40 sheets of paper has never come in such a small yet powerful punch before!

Opens For Tacking

This heavy-duty stapler also opens flat at 180-degrees for bulletin board tacking or crafting for those arts and crafts fans.

Compact Size

This compact stapler is small yet efficient and is perfect for the office workspace or home office desk.

Sleek Design

This stapler also stand both vertically or horizontally to fit perfectly on any desktop and features a non-skid rubber base that provides stability and desktop protection.