14 best behringer mixer bands

Product description

BEHRINGER 5 IN MIXING BOARD W EQ. Mains voltage - 120 V~, 60 Hz

• Premium ultra-low noise, high headroom analog mixer
• State-of-the-art, phantom powered XENYX Mic Preamp comparable to stand-alone boutique preamps
• Neo-classic "British" 2-band EQ for warm and musical sound
• Main mix, stereo CD/tape plus separate headphone outputs
• CD/tape inputs assignable to headphone output or main mix outputs. Power consumption 13 W

User questions & answers

Question:	I didn't really understand the inputs on this mixer. So I have 3 electric guitars, and an electronic drum kit. Can all of these,with mic,be connected
Answer:	This mixer does not have sufficient mono channels for your application. Channels 2-3 and 4-5 are stereo inputs (meaning they are contolled with the same fader). Some of the larger Xenyx mixers will get you the inputs you need.... something with at least 5 distinct faders to control each instrument's mix individually.Hope this helps. :-)
Question:	Does this mixer support 48V Phantom Power
Answer:	Most microphones do not require 48 volts of phantom power. Many condenser microphones only require somewhere between 4 and 12 volts. You should check your mic. It looks like this is a 15 volt feed.
Question:	Can this mixer connect to a PC via a soundcard
Answer:	Yes, to an analog soundcard. All you need is a 1/8" stereo to dual-RCA cord. Mixer has both input and output RCA capability, so you could feed the output of the mixer to the line/mic of the soundcard or feed the output of the soundcard (line out/speaker out) to the input of the mixer. There is also a headphone jack on the mixer so that could also be patched back to the soundcard's line in/mic. For me, I am usually running the PC speaker out to the mixer RCA input -- the volume is controlled by the Main, and then I can either use headphones from the mixer or run the 1/4" output into my guitar amp. Hope this helps.
Question:	What does the 2 track input do
Answer:	The 2 track input allows you to connect an external music source to the xenxyx mixer and then into an amplifier with speakers or headphones using the outputs located near the top. The external music source can be anything that has the red and white RCA outputs such as a cassette/CD player or VCR/disc player (the red and white input/output for the 2 track are called RCA connectors). This is so you can plug in your CD player and also a microphone and an instrument that has a 1/4" output such as a guitar or electric piano and have it all mixed together. Just below the 2 track input are a couple of buttons that allow you to choose whichever output you want, either headphones or amplified speakers (main out). The 2 track outputs on the mixer will allow you to send the vocals and/or instrument mix to a recording device that has the red and white RCA inputs. I hope this helps.

Product features

Xenyx 502

Got a solo gig at the local coffee shop? Need to make a quick public announcement? Simple sound calls for the simply superb Xenyx 502, the mixer with everything you need to give an intimate setting incredible sound. The ultra-compact Xenyx 502 mixer’s 5 Inputs (1 mic, 2 stereo) allow you to effortlessly achieve premium-quality sound, thanks to the studio-grade, phantom-powered Xenyx Mic Preamp and ultra-musical 'British' channel EQ.

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our Neo-classic 'British' 2-band EQ for warm and musical soundmixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

The Ins and Outs

The 5-input, 2-bus Xenyx 502 with xenyx mic preamp can accommodate either a dynamic or condenser microphone. The 2-band British EQ is famous for its warm, musical sound. Play music between sets via the RCA CD/Tape Inputs (main mix or control room/phones assignable) and record your performance to an outboard recording device via the RCA outputs.

Small is Beautiful

Weighing in at a mere 1.2 pounds (0.55 kg), the xenyx 502 is the portable, practical way to turn a speech or scaled-down performance into a sound to behold. Schools, meeting rooms, restaurants and songsmiths the world over agree this mighty mite is a high-fidelity lifesaver.

Amazing Value

No matter what your audio mixing needs, the xenyx 502 provides the performance and features that can take your talent to the next level,Professional sound quality, our legendary Xenyx mic preamps, British-style EQs and rugged reliability make Xenyx 502 ideal for both your live gigs and recording. Try one on today – we have one available in your size!

Product description

BEHRINGER DIGITAL PRO MIXER DDM4000: Ultimate 5-Channel Digital DJ Mixer with Sampler, 4 FX Sections, Dual BPM Counters and MIDI. 32-bit digital DJ mixer with beat-synchronized sampler, 4 multi-FX sections, 2 BPM counters, digital crossfader and MIDI. 4 Phono/Line stereo channels allowing up to 8 signal sources to be connected simultaneously. 2 microphone inputs with Gain, EQ, Talk function and FX. 4 stereo channels with Gain, programmable parametric 3-band EQ with Kill function, fader curve control and flexible crossfader assignment. Fully featured MIDI controller for your DJ software. Sophisticated sampler with beat-controlled loop function, real-time pitch control, sampler FX and crossfader start option. 2 freely assignable and BPM-synchronized, high-quality FX engines (Bitcrusher, Resonator, Reverb, Flanger, etc.). Ultra-fast, and accurate BPM counters for automatic BPM synchronization of sampler, FX, crossfader and external drum machines, etc. via MIDI. Digital crossfader with flexible curve adjustment, reverse button and automatic, BPM-synchronized crossfading. Dual-mode crossfader with innovative frequency-selective crossfading. Dedicated headphones section includes PFL mix/split and bass/snare boost function. Recall your last mixer setting at the push of a button. Digital S/PDIF output for direct recording of your performance. Rack mount brackets included for ultimate flexibility. High-quality components and exceptionally rugged construction ensure long life. The DDM4000 provides top-level functionality for the experienced DJ, at a cost that will have you smiling all the way to the bank. Grab yourself a DDM4000 from your nearest authorized BEHRINGER dealer and start spinning sets that will catapult you directly to star status! Conceived and designed by BEHRINGER Germany. Please contact the Customer CARE department for any technical issues at 702-800-8290.

The DDM4000 is a state-of-the-art 32-bit digital DJ mixer, jam-packed with creative tools, yet its intuitive layout will let you feel at home in an instant. Editing, storing and recalling your settings is simply a breeze! Hook up your turntables and CD/MP3 players to its 4 stereo channels, each with fully programmable EQ and Kill switches. Put ultimate versatility at your fingertips with fully programmable beat-sync'able multi-FX modules, a pair of high-precision BPM counters and a digital crossfader with custom curve adjustment. And the super-cool BPM-sync'd sampler with real-time pitch control, loop and reverse functions will make your crowd go wild.

A state-of-the-art 32-bit digital DJ mixer jam-packed with creative tools. Click to enlarge.

Digital crossfader with flexible curve adjustment, reverse button and automatic, BPM-synchronized crossfading.

Two freely assignable and BPM-synchronized, high-quality FX engine.

Choose Your Channel

The DDM4000 struts 5 independent channels. Channels 1-4 are crossfader-assignable stereo channels, suitable for both vinyl and CD decks, and have appropriate phono/line level toggle switches at the input. All channels feature 3-band digital EQs with up to 12 dB of boost and infinite cut option, or "kill." Any channel can be monitored directly via headphones thanks to the PFL switch above the fader.

A dedicated Mic channel is provided in mono, with 2 XLR mic inputs. The vocal channel features a special "talk" feature that attenuates the volume of the other 4 channels, ensuring you will be heard over the music. The Mic channel also has its own FX section that can be applied with a single button.

Cross My Heart

The core functionality of any DJ mixer lays in its crossfader. The DDM4000's crossfader can be assigned to any of channels 1-4, and sports a 3-band EQ kill button on either side. The curve sensitivity of the crossfader is adjustable, and in the unlikely event that you wear it out, the crossfader itself is replaceable.

Step Up Your Sampling

The DDM4000's BPM-synced sampler is a sought-after addition. The sampler allows you to record a segment of incoming audio and loop it continuously without dropping the beat. Once your track is looping from the sampler, you can swap discs and queue up new tracks and mix them back in. The transition is seamless!

Effects

The DDM4000 features a stunning dual FX section that includes our patented BPM counting technology. This allows the mixer to read/display the BPM of 2 different inputs and to apply BPM-synchronized effects, such as an echo synced to the beat of the music. Effects such as bitcrusher, reverb, delay, pitch shift, and more are available, and can be assigned independently to multiple channels.

The DDM4000 is ideal for a club owner who has multiple working DJs performing on a recurring basis. User preferences like fader curve, FX settings, EQ, kill frequencies, etc., can all be set to various user accounts and recalled instantly. This feature can eliminate setup time between DJs altogether!

Swimming Upstream

When you combine the DDM4000's digital operation with MIDI functionality, the door to creative applications opens REALLY wide. For example, the mixer can be used as a MIDI controller for your favorite DJ software--or whatever else you like! Channel faders, EQ knobs, and button presses can all be configured to send customized MIDI data. The possibilities here are quite endless.

What's in the Box

Behringer DDM4000, Power Cable, Rack Mount Brackets, User's Manual

• 32-bit digital DJ mixer with beat-synchronized sampler, 4 multi-FX sections, 2 BPM counters, digital crossfader and MIDI
• 4 Phono/Line stereo channels allowing up to 8 signal sources to be connected simultaneously
• 2 microphone inputs with Gain, EQ, Talk function and FX
• 4 stereo channels with Gain, programmable parametric 3-band EQ with Kill function, fader curve control and flexible crossfader assignment
• Fully featured MIDI controller for your DJ software

User questions & answers

Question:	Is this compatable with self powered behringer dj speakers
Answer:	This mixer can store 2 samples (There are 2 banks for storing). The length of the sample can be between 1 and 16 beats. Or you can choose "Endless recording": in this case you will choose the length of the sample. I don't know what is the maximum length in seconds (I never tried to go to the limit), but because it says endless recording and this is a sample you want and not a full song to be recorded, it should not be an issue.
Question:	Does this mixer come with Traktor software
Answer:	Yes you can, whatever you are using As a MIDI you may need to go online and find the mapping for it, or you can map whatever the media is yourself, Google should be a great help on step by step setup
Question:	How many seconds of sample can this mixer store at a time
Answer:	It is my belief that this should work on all Chauvet Hurricanes. I use it with my 1300 and it works great! I wouldn't use any other juice with my machine!
Question:	can i use midi and analog at the same time? e.g. using channels 1 & 2 for computer and say 3 & 4 for cdjs
Answer:	Yes, it will but depends on how many watts your fog machine is rated for, mine is 900 watts and works great on a 30x40 x 14 ft walls, just buy the Chauvet 900 watts fog machine and you will not regrade

Product features

Choose Your Channel

The DDM4000 features 5 independent channels. Channels 1 - 4 are crossfader-assignable stereo channels, with Phono/Line Level toggle switches that make them suitable for your vinyl and CD/mp3 players. All channels feature 3-band digital EQs with up to 12 dB of boost and infinite cut option (Kill), and can be monitored directly via headphones thanks to the PFL switch above the fader. A dedicated Mic channel is provided in mono, with 2 XLR Mic Inputs and features a special Talk feature that attenuates the volume of the stereo channels (ducking), ensuring your announcements will be heard loud and clear over the music. The Mic channel also has its own FX section – which can be applied with a single button.

Crossfader

The core functionality of the DDM4000 can be found in its Digital Ultracurve Crossfader, which is equipped with Reverse Tap and Hold buttons, plus automatic BPMsynchronized crossfading. Smooth and ultra-responsive, this First-Class Crossfader can be assigned to any of channels 1 - 4, and sports a trio of 3-band EQ Kill buttons on either side. The curve sensitivity is adjustable, and in the unlikely event you ever wear it out, the Crossfader itself is easy to replace.

Step Up Your Sampling

DDM4000’s BPM-synced sampler is a highly sought-after feature, which allows you to record a segment of incoming audio and loop it continuously – without dropping the beat. Once your track is looping from the sampler, you can swap discs, queue up your new tracks and mix them back in – for totally seamless transitions!

Own the Night!

The DDM4000 is the ideal digital mixer for the DJ who is on the way to the top, or the club owner who has multiple DJs performing on a recurring basis. All preferences, such as fader curve, FX settings, EQ, Kill frequencies, etc., can be stored in individual user accounts and recalled instantly. This feature alone can completely eliminate the changeover time between DJs – so the party never stops! With the amazing DDM4000 in the hands of an experienced DJ, at a cost that will have you smiling all the way to the bank – you truly can own the night!

Compose. Record. Mix. Share.

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional-grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

Product description

• Premium ultra-low noise, high headroom analog mixer
• 10 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
• 8 studio-grade compressors with super-easy "one-knob" functionality and control LED for professional vocal and instrumental sound
• Neo-classic "British" 3-band EQs with semi-parametric mid band for warm and musical sound
• Studio-grade FX processor with 16 editable presets including reverb, chorus, flanger, delay, pitch shifter, multi-effects, Tap function and storable user parameter settings

User questions & answers

Question:	My USB out is only mono. The manual is very unfriendly. Help
Answer:	It does come with mounts
Question:	Do you know what kind of mixer rack case this will fit with the rack rails
Answer:	You can use up to 4 separate monitor buses, but this mixer works best if you use Aux buses 1 and/or 2 as monitors because these are "pre-fader" outputs (which means you won't risk getting feedback from the monitor if you increase the channel fader volume). Use the 1/4" phono jacks labeled "Aux Send" and run these to your POWERED MONITORS ( or to the input of a power amp for your monitors). Adjust the volume of each channel in the monitor mix by adjusting the knob labeled "Aux 1" or "Aux 2". Adjust the overall monitor volume using "Aux Send 1, 2" gain knobs on the right side of the board. If you want to run the same mix to all of your monitors, just use Aux 1, and then daisy chain it from one powered speaker to the next (if your powered monitors have a signal out jack. Otherwise, you will need to split the output using "Y" connectors.I run 4 powered monitor speakers on 2 Aux Buses (Aux 1 and Aux 2). Aux 1 is for the front line of the band, so I wire from the Aux Send 1 jack to the Front Left monitor, then daisy-chain from that speaker to the front right speaker. Aux 2 is for the rhythm section, so I wire from the Aux Send 2 jack to the Rear Left monitor, then daisy-chain from that speaker to the rear left monitor.I use a different monitor mix for front/back of the band because we sometimes use backing tracks, and I want these louder for the rhythm section, so they can stay sync'ed with the track.You could use all 4 Aux Sends so that each monitor had a different mix but 1) That gets really complicated to sound check, and 2) Aux Send 3 is used for Effects, so using it as a monitor channel would mean you can't use the mixers effects. and 3) Aux Sends 3 and 4 are Post-Fader, which means they are affected by the channel fader, which means if you adjust the fader for the mains, say to bring up a vocalist, you are also bringing them up in Aux 3 and 4, which could mess up the on stage mix, and cause all kinds of havoc.Hope that helps.
Question:	Does it come with rack mount brackets
Answer:	of course, it has a couple of xlr outputs and a xlr subwoofer output, i have a Behringer B215D Eurolive Speaker Active 550-Watt 2-Way and it works great, this mixer it's very good for the price (but don't expect an pionner nexus 900)
Question:	how do i run monitors to stage? need 4 monitors on stage, what are my options
Answer:	It used to come with one 4 years back (when I bought it) but Traktor has upgraded to much advanced level at this point. You might need to check Behringer site to find details of the Traktor software they ship with this product now.

Product features

Behringer Xenyx X2442USB Premium 24-Input 4/2-Bus Mixer with USB/Audio Interface

• Premium ultra-low noise, high headroom analog mixer
• 10 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
• 8 studio-grade compressors with super-easy "one-knob" functionality and control LED for professional vocal and instrumental sound
• Neo-classic "British" 3-band EQs with semi-parametric mid band for warm and musical sound
• Studio-grade FX processor with 16 editable presets including reverb, chorus, flanger, delay, pitch shifter, multi-effects, Tap function and storable user parameter settings
• Channel inserts and direct outputs on each mono channel plus main mix inserts for flexible connection of outboard equipment
• 4 aux sends per channel: 2 pre/post fader switchable for monitoring/FX applications, 2 post fader (for internal FX or as external send)
• Clip LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels
• Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls

XENYX X2442USB

The feature-packed XENYX X2442USB mixer allows you to effortlessly achieve premium-quality sound thanks to 10 onboard studio-grade XENYX Mic Preamps and ultra-musical “British” channel EQs – with a semi-parametric mid band for the maximum flexibility in sound sculpting. And our easy-to-use “one-knob” compressors provide total dynamic control for the ultimate in punch and clarity, while respecting all the power and emotion you pack into every note. Add to this our 24-bit, dual-engine Multi-FX processor with 16 editable, professional-grade presets including reverb, chorus, fl anger, delay, pitch shifter and multi-effects – and the X2442USB becomes an incredibly versatile mixer for your live performances. But the X2442USB wasn’t just designed to handle your live gigs; it also provides the state-of-the-art tools you need to make stunning, professional-quality recordings.

Studio-Quality Compressor - Stairway to Heaven

Our studio-grade compressor is based on classic and famous studio equipment from the 70’s. This totally transparent and musical compressor design allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the highly visible status LED. The compressor increases sustain and gently smoothens out signal peaks, which is especially handy when you’re laying down the funk, à la slap and pop – or hammering home your most-aggressive metal lines. The resulting output level lets you unleash powerful and impact-laden bass lines, while still sitting right where you need to be in the mix!

Sublimely Musical British EQ

The British consoles of the 1960s and ’70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our XENYX mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

Built-in Digital Multi-FX Processor

Equipped with our studio-grade 24-bit Multi-FX processor, the X2442USB gives you 16 mind-blowing digital effect presets such as delay, chorus and reverb. Time-based functions can be entered manually by pressing the Tap button in tempo with the music. Apply them to any channel, as well as to the monitors and main output. Of course, if you have treasured outboard gear you’ve grown attached to, the X2442USB lets you integrate them into the mix – bypassing the built-in FX processor.

Product description

Behringer 18CH DIGITAL AIR MIXER

• iPad/Android tablet controlled 18-input digital mixer for studio and live application
• 16 award-winning MIDAS-designed, fully programmable mic preamps for audiophile sound quality
• Built-In Tri-Mode Wi-Fi router for direct operation-no need for external routers
• 18 x 18 channel, bidirectional USB interface for direct recording on iPad etc.
• Revolutionary Dugan-style Auto-Mixing automatically manages microphone gain sharing (future firmware).Outputs - Main:2 x XLR

User questions & answers

Question:	can I access this through the Internet from an off sight WiFi connection
Answer:	This unit has three ways to connect! 1. It has it's own WiFi built in make sure that the switch is all the way to the right2. You can also connect to the home WiFi by putting the switch in the middle3. You can use a Ethernet cable also!Note!! Make sure that whatever you are using that you go into setting and with the wifi connect to the XR18because if you don't the unit will not work!
Question:	Will this unit allow me to record all 16 mic pre's separately and directly to my pc daw
Answer:	Yes, you can record all 16 Mic Pres separately to you daw. Call ABR-MusicVideo (262) 632-9222 and we will give you a discount for the Behringer XR18. ABR-MusicVideo is an authorized Behringer dealer and you will receive a 3 year warranty.
Question:	Is andrews bros. recording a behringer authorized reseller? i want to be sure i'm eligible for behringer's 3-year extended warranty
Answer:	Yes, Andrews Bros. Recording is an Authorized Behringer and when you register your product in the 1st month, Behringer gives you a 3 Year Warranty. Call ABR-MusicVideo (2620 632-9222 and we will take $25 off the price. Andrews Bros. Recording/ ABR-MusicVideo
Question:	If you set this up behind stage but operate from front of house, how do you get audio from front of house to backstage (like an iPod, or computer
Answer:	I agree with Sean on this one. I usually plug in an MP3 player and just fade in the music. This may not be the best option for you if you are constantly needing to queue music. When I've had to do that, I've done it 2 different ways, both involve a stage snake: one way was I run an actual stage snake and have the Behringer with me as if it were a traditional mixer. The second way is to run a snake for only the 2 channel audio from the laptop next to me and send it up into the stage. Again, both involve a snake and sort of defeat the main purpose of this. However, you still gain remote access to the mixer which still allows you to roam around the room to adjust the audio. It's not a complete loss if you need constant access to a music source.

Product features

Behringer XR18 Digital Mixer

• iPad/Android tablet controlled 18-input digital mixer for studio and live application
• Built-In Tri-Mode Wifi router for direct operation—no need for external routers
• 18 x 18 channel, bidirectional USB interface for direct recording on iPad etc.
• Revolutionary Dugan-style Auto-Mixing automatically manages microphone gain sharing
• 100-band Real Time Analyzer (RTA) for all channel and bus EQ’s
• ULTRANET connectivity for Behringer’s P-16 Personal Monitoring System
• Rack ears and protection bumpers included for flexible rack and onstage applications
• 6 aux and main LR buses with inserts, full dynamics processing and 6-band parametric or 31-band graphic EQ
• 40-Bit floating-point DSP features “unlimited” dynamic range with no internal overload and near-zero overall latency
• Internal switch-mode power supply for noise-free audio and low power consumption

X AIR XR18

The Behringer X32 completely changed the game by rethinking what is possible from a digital mixer – and over 100,000 users are enjoying the results. Now, that same technology has been incorporated into a small, but incredibly powerful, rack-mountable mixer that will forever change both the way you record – and the way you play live music.

The revolutionary XR18 is a powerhouse 18 input/12 bus portable mixer housed in an extremely sturdy stage box design for use with iPad and Android tablets. It is ideally suited for both live and studio applications

Built-In Tri-Mode Wifi Router

Designed for the ultimate in mobility, the XR18 comes with an integrated Wifi module for direct control of your mixer’s functions – without the need to setup and configure an external router. The XR18 gives you the freedom to focus on your mix, while allowing you to move about the venue to experience what every part of the audience is hearing. Plus you can adjust live monitor wedges from the artist’s perspective – or better yet, let them mix their own IEMs and floor monitors via their own tablets

Recording Simplified

The incredibly fast and comprehensive 18 x 18 channel, bi-directional USB interface makes the XR18 an amazingly powerful digital mixing solution for recording directly to your iPad or PC. Dial in the perfect monitoring mix with effects and zero-latency, while sending up to 16 microphone signals – and the keyboard player’s MIDI notes to your DAW for recording.

Whether you’re making rock history in the studio, or you want to capture intimate live performances – it’s never been easier to record stunning tracks with exceptional clarity.

4 Onboard X32 Effects Engines

Equipped with the very same FX engines as the now legendary X32 Digital Mixing Console, the onboard virtual FX Rack provides access to four true-stereo (8 mono), multi-effects processors including delay, chorus, dynamics – plus the XR18 can run production-quality, true-stereo reverbs concurrently with 31-band EQ on the main and aux buses, all without the need for any additional hardware.

Product description

The Behringer POWERPLAY P16 system is the easy, affordable way to give your musicians and vocalists what they really want - "more me!" P16-M Personal Mixers lets each performer take control of what they hear, allowing the engineer to concentrate on providing the audience with the best possible listening experience. Fast and easy to set up, a basic system can be installed and configured in a matter of minutes - and the system can be expanded to adapt to changing needs. Tech-Free Zone. The P16-M's simple user interface makes it easy for even non-techies to dial-in the perfect monitor mix. For example, let's say the electric guitar is too loud in the lead vocalist's mix; they simply press the appropriate channel button (the one labeled E. GTR) and turn the Volume control to lower the guitar level in their mix. They can also adjust Pan (left to right mix), EQ (Bass, Mid with sweepable Freq control and Treble), and much more. All of these adjustments can be made without affecting anyone else's personal mix. Easy Installation A basic installation consists of one P16-I Input Module, which connects to the main mixing console, and up to six P16-M Personal Mixers, creating a system big enough to equip a typical recording studio, a small to medium-sized band, or a worship team. You'll also need a few standard audio and CAT5 cables. The optional P16- MB mounting bracket allows the P16-M Digital Personal Mixer to be attached to any standard microphone, music or drum stand. The system can easily be expanded via the P16-D Digital ULTRANET Distributor, six of which can be combined to drive up to forty-eight P16-M Personal Mixers. Extraordinary Value. The POWERPLAY P16 puts total control of the monitor system where it belongs - in the hands of the performers, freeing up the engineer to sculpt the perfect front-of-house mix. The POWERPLAY P16 system is the easy, affordable way to tame runaway stage volume and give your musicians and vocalists what they really want - "more me!"

• 16-channel digital stereo mixer to create your personal monitor mix
• Ultra-intuitive "analog" operation with total recall and 16 presets for custom mixes
• State-of-the-art 24-bit D/A converters for premium audio quality
• 16 Channel Select buttons with dual LEDs for perfect overview
• Level and Pan/Spread control per channel with LED meter

User questions & answers

Question:	How does this compare to aviom or other brands? i'm looking for a monitor system for 6 band members and i want really good quality for what i buy
Answer:	All mine (8) came with a cat5 cable
Question:	can't i do the same thing with a wireless tablet
Answer:	We are using this system to eliminate - as much as possible - the use of floor wedges/monitors. So, yes. Each musician needs a P16-M. They then dial in which of the inputs they need to hear more or less of in their personal ear-buds. NOTE: As "RY" noted in their response - you CAN, and we DID start out with two singers sharing a P16-M by using a splitter out the headphone jack to enable two sets of in-ear buds. But it was pretty disastrous. For one thing, no two people have the same "ears" and preferences. And each singer wanted more of themselves, etc.
Question:	Does is come with cat5 cable
Answer:	The Mixer built-in bluethooth, you can try it on iPad pro as input.
Question:	Does each muscian need one
Answer:	Yes, the mixer can be used to hook up turntables a mixer and a sb3 dj controller.

Product features

POWERPLAY P16-M

The POWERPLAY P16 system is the easy, affordable way to give live or recording musicians/vocalists what they really want – “more me!” The P16-M Personal Mixer lets each performer take control of his/her own monitor mix, whether on the stage or in the studio – and allows the engineer to concentrate on creating the best mix possible.

Fast and easy to set up, a basic system can be installed and configured in a matter of minutes – and the system can be expanded to adapt to changing needs. Read on to find out how the P16-M Digital Personal Mixer can improve your performance!

Tech-Free Zone

The P16-M’s simple user interface makes it easy for even non-techies to dial-in the perfect monitor mix. They can not only adjust the Volume for each of 16 input signals, but also set the Pan (left to right mix), EQ (Bass, Mid with sweepable Freq control and Treble) – and much more. And the best part, these adjustments can all be made without affecting anyone else’s personal mix. After you’ve dialed-in the perfect mix, it can be stored in one of 16 presets for instant recall at your next performance or session.

ULTRANET – Seamless Integration

The world-renowned engineers at KLARK TEKNIK, MIDAS, TURBOSOUND and BEHRINGER have all come together to create something truly innovative that will change live and studio workflow forever – ULTRANET. This revolutionary technology seamlessly transmits up to 16 independent channels of 24-bit digital audio and control data via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Advantages realized through ULTRANET digital networking, versus traditional analog methods: audio signals are impervious to Radio Frequency Interference (RFI); signal crosstalk is eliminated; and ease of setup translates directly into significant time saved during installation. ULTRANET effectuates a powerful digital eco-system that gives you unparalleled control over every element of your audio production environment from one convenient location.

Easy Installation

A basic installation consists of one P16-I Input Module, which connects to the main mixing console and up to six P16-M Personal Mixers, creating a system big enough to equip a typical recording studio, small to medium-sized band or worship team. You’ll also need a few standard audio and Cat 5e cables. The optional P16-MB mounting bracket allows the P16-M Digital Personal Mixer to be attached to any standard microphone, music or drum stand. As many as six P16-D Digital ULTRANET Distributors can be added to your system to accommodate up to forty-eight P16-M Personal Mixers.

Features Galore

Not only is the P16-M easy to use, but it’s also big on quality. You’ll enjoy audiophile-grade sonic performance, 16 storable presets for custom mixes, 16 Channel Select buttons complete with dual LED indicators for quick and easy visual reference, and so much more. Need to hear just one element of your mix – just hit the Solo button. Someone playing out of time – select the Mute button for that input. Additionally, the global EQ and “drummer-proof” output level control ensure you’ll hear your perfect mix, in all its pristine glory.

Extraordinary Value

The POWERPLAY P16 Personal Monitoring System puts total control of the monitor system where it belongs – in the hands of the performers, freeing up the engineer to sculpt the perfect front-of-house mix. By putting dynamic control over virtually all elements (Volume, Pan, Solo & Mute) of up to 16 input signals within each performer’s reach, the P16 Personal Monitoring System provides the easy and affordable way to give them exactly what they want – “more me!” Check the P16-M out today – and experience the ultimate in live and studio personal monitoring.

You Are Covered

We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world. As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.

Product description

• 40-input channel, 25-bus digital mixing console for Studio and Live application
• 32 MIDAS-designed, fully programmable mic preamps for audiophile sound quality
• 25 Fully automated motorized 100 mm faders allow for instant overview, powerful scene management and DAW
• 16 XLR outputs plus 6 additional line in/outputs, 2 phones connectors and a talkback section with integrated or
• Individual and dynamic LCD Scribble Strips on all channels and buses creating easy assignment and intuitive

User questions & answers

Question:	P16 integration... I have many Sennheiser IEM EW300 G3's & love them - If I switch Presonus to X32 is there compelling IEM integration switch to P
Answer:	It could possibly do that. This is a latching switch so its push on, push off, not momentary. I used to use one on my keyboard to hold notes so it will probably work for you. Try it. It wont damage your keyboard.
Question:	Can we route/split 1 input (e.g. 1 mic input) into say 3 different inputs as if 3 mics all receiving the same audio source
Answer:	That depends. This pedal does not ‘pass’ signal thru it. It only has has 1 jack so it only switches. So if you have an active subwoofer and it has a footswitch (on/off) 1/4” TS jack, then yes. Otherwise, no. Hooe this helps.
Question:	How many years have you been having this unit for? Have you experienced any repairs
Answer:	This is a foot switch for guitar amp channel control.
Question:	What is the configuration of the expansion slot that the X32 ships with? Is it USB able to connect multi-track to PC? If so, how many channels
Answer:	16 AWG

Product description

Behringer Xenyx 802 Premium 8-Input 2-Bus Mixer with Xenyx Mic Preamps and British EQs. Never use unbalanced XLR connectors (PIN 1 and 3 connected) on the MIC input connectors when using the phantom power supply



Signal-to-noise ratio: 110 dB / 112 dB A-weighted (0 dBu In @ +22 dB GAIN

• Premium ultra-low noise, high headroom analog mixer
• 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
• Neo-classic "British" 3-band EQs for warm and musical sound
• 1 post fader FX send per channel for external FX devices
• 1 stereo aux return for FX applications or as separate stereo input

User questions & answers

Question:	How many microphones can I connect to the mixers. Will it be able to have
Answer:	No cables where not included, I had to convert my 1/8" to 1/4 with an adapter, then I had to buy 1/4in male Y-cable but your needs could be different, all of the connections are 1/4inch if you look closely at the picture. As for usb mic, unless you are able to find a converter that will convert to 1/4inch you cant use it, or you will have to buy a new mic because when you get into using so many converters, in my experience, the sound isnt as good bad quality so I wouldn't recommend this. I hope this can helped you, if you have further questions/concerns, look up the brand/manufacturer they may have help/support
Question:	does this come with a/c power
Answer:	You could if you in put mic in 1 channel with balance all the way 1 direction, and then guitar in another channel with the balance all the way the other direction. You would then have 2 seperated mono recordings. Easily edited in recording software.
Question:	Does it come with the cable to plug it in to the computer, and i have an usb mic what kinda jack should i buy for it
Answer:	Here's what the manual states: The XENYX mixer line has built-in USB connectivity, allowing stereo signals to be sent to and from the mixer and a computer. The audio sent from the mixer to a computer is identical to the MAIN MIX. Audio being sent to the mixer from a computer can be routed to the main mix with the 2-TR/USB TO MAIN button. Connect the USB type B plug into the USB jack on the mixer, and the other end into a free USB port on your computer. There are no required drivers, but we recommend that PC users install the included ASIO driver. The driver can also be downloaded from behringer.com.I don't know what OS you are using, but you might want to make sure that your computer is set up for stereo input/output via your preferences. You could also check to see if you have the correct drivers installed from Behringer, and lastly, make sure you have the 2TR/USB to MAIN properly depress and you can also route it to a set of headphones via the SOURCE 2TR/USB. Also not sure if this is what you are hearing through headphones or mains (?). Are your main channels routed independently? So when you say USB Out, is that from a stereo source or from the PA?
Question:	Does "2 Bus Mixer" mean that two inputs (eg guitar and vocal) can be separated in a recording software? Thanks
Answer:	This is what I have it installed in:http://www.musiciansfriend.com/accessories/odyssey-cxp1110w-carpeted-pro-combo-case-w-wheels?skuId=site1sku804787000000000

Product features

XENYX 802

• Premium ultra-low noise, high headroom analog mixer
• 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
• Neo-classic "British" 3-band EQs for warm and musical sound
• 1 post fader FX send per channel for external FX devices
• 1 stereo aux return for FX applications or as separate stereo input

XENYX 802

Got a solo gig at the local coffee shop? Need to make a quick public announcement? Simple sound calls for the simply superb XENYX 802, the Behringer mixer with everything you need to give an intimate setting incredible sound. The ultra-compact XENYX 802 mixer’s 8 Inputs (2 mic, 2 stereo + Aux Returns) allow you to effortlessly achieve premium-quality sound, thanks to the 2 studiograde, phantom-powered XENYX Mic Preamps and ultra-musical “British” channel EQ.

Sonically Superior Mic Preamps

All XENYX mixers have one thing in common – great-sounding, high headroom XENYX mic preamps. These state-of-the-art mic pres represent a major step in the evolution of audio technology – and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps. XENYX preamps offer a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, XENYX mixers provide such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking.

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our XENYX mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

The Ins and Outs

The 8-input, 2-bus XENYX 802 has two XENYX mic preamps with +48 V phantom power, making it possible to use 2 dynamic or condenser microphones. The 3-band British EQ is lauded throughout the sound engineering world for its warm, musical sound. You can use the XENYX 802’s Effects Send and Return jacks for connecting to external effects, and the built-in RCA CD/Tape Inputs (main mix or control room/phones assignable) and Outputs let you play music between sets, and record your performance to outboard recording gear, respectively.

Small is Beautiful

Weighing in at a mere 2.2 pounds (1.0 kg), the XENYX 802 is the portable, practical way to turn a speech or scaled-down performance into a sound to behold. Schools, meeting rooms, restaurants and songsmiths the world over agree this mighty mite is a high-fidelity lifesaver.

Amazing Value

No matter what your audio mixing needs, the XENYX 802 provides the performance and features that can take your talent to the next level, at a price sure to amaze you. Professional sound quality, our legendary XENYX mic preamps, British-style EQs and rugged reliability make XENYX 802 ideal for both your live gigs and recording. Try one on today – we have one available in your size!

Product description

• Ultra-compact rack-mountable 2 x 800-Watt stereo powered mixer (1600-Watt bridged mode)
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
• Ultra-compact design at nearly half the depth and weight of conventional powered mixers means no more lugging around dead weight
• 10-channel mixer section features 6 mono and 2 stereo channels plus separate CD/Tape input/output
• 2 studio-grade, 24-bit stereo FX processors with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects

User questions & answers

Question:	Can you daisy chain a separate amplifier with this
Answer:	Yes, there is a line level output that can be used for another amplifier
Question:	Does this come ready to be rack mounted? If not, what item is needed
Answer:	The brackets come with the unit and need to be mounted on the PA.
Question:	Will phonic s712 120/180 handling watts speakers (8 ohm) be usable with this amp
Answer:	You should have no problem using this amp as it is capable of 800 W out. Note that the amp requires Speakon connectors for the output speaker cables.
Question:	can I just run the amp just from the monitor out, no mains, no speakers without blowing the amp? I want to just test the monitors at home
Answer:	You can run the amp with just the monitors but you need powered speakers for the monitor output. Or go into another amp and then to regular speakers.

Product description

Premium ultra-low noise, high headroom analog mixer

• Premium ultra-low noise, high headroom analog mixer
• 4 state-of-the-art Xenyx Mic Preamps comparable to stand-alone boutique preamps
• Studio-grade compressors with super-easy 'one-knob' functionality and control LED
• Neo-classic 'British' 3-band EQs for warm and musical sound

User questions & answers

Question:	does this mixer have phantom 48v
Answer:	Yes!
Question:	Is this compatible with Garage Band
Answer:	Yes, it is compatible a 100% with garageband
Question:	it will work with os sierra on a mac air
Answer:	Yes, I was able to use this to record a podcast on my Mac.
Question:	How do I connect an RCA audio source (CD player) into this while maintaining the audio from my 3 mics? The 2-track mutes the mics
Answer:	I haven't tried it, but I would think you would need to convert from your RCA to 1/4" banana plug type adapters such as the Hosa Cable GPR101 RCA To 1/4 Inch TS Adaptor - 2 Pack. (Search it on Amazon). You need to connect it as an audio source, the RCA plugs on these don't seem to do much but give you sound through the headphones coming back in so for example if you were using a metronome to keep time while laying down a bass groove, you wouldn't actually be passing that metronome click back through to your recording, just the headphones...

Product features

XENYX Q1202USB

The compact Q1202USB mixer allows you to effortlessly achieve premium- quality sound, thanks to its 4 onboard studio-grade XENYX Mic Preamps and ultra-musical 'British' channel EQs. And our easy-to-use 'one-knob' compressors provide total dynamic control for the ultimate in punch and clarity. Add to this, the sweet forgiveness of our British-style EQs and and +48 V Phantom Power for use with studio- grade condenser microphones – and the Q1202USB becomes an incredibly versatile mixer for your live performances. It also provides the state-of-the-art tools you need to make stunning, professional-quality recordings. Along with its built-in USB/audio interface, the Q1202USB mixer comes with all the recording and editing software needed to turn your computer system into your own personal high-performance home recording studio.

Product description

• Premium ultra-low noise analog mixer with optional battery operation
• 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
• Neo-classic ''British'' 3-band EQs for warm and musical sound
• Optional battery operation (with 9 V alkaline batteries) allows for mobile operation
• 4 balanced, high-headroom stereo inputs with 3 additional mic inputs

User questions & answers

Question:	how to plug into speakers
Answer:	It's not a "powered mixer" you have to plug the main output into an amp then the speakers into the amp. Or plug the main output into "powered speakers" like krk rokit 8's.
Question:	How much time does it work on batteries
Answer:	The manual that comes with it says 4 hours. Are there any owners who have real world experience with battery life?
Question:	This mixer can hold up to 4 mics, correct? I'm looking for something to use in group discussions
Answer:	This sound board has 5 XLR phantom powered inputs. Therefore, you may have up to five microphones using this type of input cable. In addition to this, you have 1/4" cable inputs, and RCA inputs for extra mic's, or sound from other devices, such as your computer or a CD player. For these reasons, this board makes a great tool for doing group discussions.
Question:	what is the difference between the 1002b and the
Answer:	Quite a bit of difference. The amount of XLR connections available, the 1002B has 5 compared to the 2 available on the 1002. There are 2 monitor/fx sends on the 1002B as to 1 on the 1002. All of the channels have EQ on the 1002B, the 1002 does not. The 1002B uses slider faders for the channels as compared to rotary faders on the 1002. The 1002B utilizes a power switch to turn the mixer on/off, the 1002 does not have a power switch. The 1002B offers the option of using batteries to power the mixer for portable use, not the 1002. I could not find anything about the 1002 shipping with rack ear adapters. The 1002B came with rack ears making installation in my gear rack a breeze. All of these observations are from me looking at the images on the Behringer website for the 1002 as I do not own one. I do own the 1002B. Hope this helps with your decision.

Product features

Behringer Xenyx 1002B Premium 10-Input 2-Bus Mixer with XENYX Preamps

• Premium ultra-low noise analog mixer with optional battery operation
• 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
• Neo-classic ''British'' 3-band EQs for warm and musical sound
• Optional battery operation (with 9 V alkaline batteries) allows for mobile operation
• 4 balanced, high-headroom stereo inputs with 3 additional mic inputs
• One FX send and one Monitor send per channel for external FX devices and monitor applications
• Clip LEDs on all channels and dedicated inserts on all mono channels
• Switchable phantom power for condenser microphones
• Long-wearing 60-mm logarithmic-taper master fader and sealed rotary controls
• External power supply for noise-free audio and superior transient response

XENYX 1002B

Got a solo gig at the local coffee shop? Need to make a quick public announcement? Simple sound calls for the simply superb XENYX 1002B, the BEHRINGER mixer with everything you need to give an intimate setting incredible sound. The ultra-compact XENYX 1002B mixer’s 10 Inputs (2 mic channels, 4 stereo channels with 3 extra mic inputs) allow you to effortlessly achieve premium-quality sound.

Sonically Superior Mic Preamps

The XENYX 1002B gets its name from our legendary, high headroom XENYX mic preamps, which have been praised by audio engineers all over the world. These state-of-the-art mic pres represent a major step in the evolution of audio technology. XENYX preamps off er a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, the XENYX 1002B provides such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking.

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our XENYX mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

Field Operation

Its compact size and flexible input scheme also make the XENYX 1002B the natural choice of sports announcers for calling play-by-play game action. Likewise, radio and TV reporters especially like the XENYX 1002B for its ease-of-use, remarkable fidelity and rugged reliability. And the 9 V battery option allows newscasters and correspondents to use the 1002B in remote locations where power is hard to come by.

Product description

• Premium ultra-low noise, high headroom analog mixer
• 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
• Neo-classic "British" 3-band EQs for warm and musical sound
• Studio-grade stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• FX send control per channel for internal FX processor and/or as external send

User questions & answers

Question:	Can this mixer produce an echo in your voice
Answer:	I've used this to go in 'both directions.' I primarily go from my mixing board ('1/4 Monos') out to my PC's Line In (1/8), but I've gone the other direction as well (PC Headphone out to Mixing Board "1/4 Monos" In).
Question:	What cables do I need to connect this to my computer to record a podcast
Answer:	3.5mm Headphone or Aux out on PC to 1/4 in on the mixer should work just fine.
Question:	Hi, is this 220-230 volts 50A
Answer:	Yes red is right channel white is left
Question:	Can i use this for passive speakers
Answer:	You can easily get a 1 foot span between the connection points of the 1/4 inch jacks. Very high quality!

Product description

BEHRINGER 16 CH DIGITAL MIXER

• iPad*/Android* tablet controlled 16-input digital mixer for studio and live application
• 8 award-winning MIDAS-designed, fully programmable mic preamps for audiophile sound quality
• Built-In Tri-Mode Wifi router for direct operation—no need for external routers
• Revolutionary Dugan*-style Auto-Mixing automatically manages microphone gain sharing
• USB connector for uncompressed stereo WAV recording and playback

User questions & answers

Question:	Does it have an on-board graphic EQ option or just parametric
Answer:	Yes, although you will not be able to make adjustments (like if a channel is feeding back or a mic is too loud). The Xair has its own wifi, and I have never lost the connection, but on one occasion I shut off my IPad by accident and we played the whole set without it being connected.
Question:	Can I run passive speakers with this
Answer:	There are 4 aux out along with the main and headphone all of these are outputs. I hope that's what you mean.
Question:	If you loose wifi connection does the unit keep operating at its last setting? will the performance still go on
Answer:	No, you can only use 2. The XLR and Line inputs on channels 1 and 2 cannot be used simultaneously. If you need to plug in 4 mics, consider a mixer with 4 preamp channels.
Question:	how do send 4 different mixes to the headphone amp? i see no other outs than mains
Answer:	Yes, it has an ac adapter. The attachment to the unit is like a miniature shielded mike jack. I have not seen a power plug of this design before. It is not a standard jack or usb input. It has a round shield and three pins. The shield is dimpled so that it only fits one way. The transformer has wires coming in and out so the plug in doesn't take up space on the wall or on your power strip. It has 120 VAC input and two outputs: 18.5 VAC 250 mA and 3.0 VAC 100 mA. There is no on/off switch on the board, so when it is plugged in, there is a bright blue light that shines showing that it is on. The only way to de-energize the board is to unplug it at the board or at the power source.

Product features

BEHRINGER (XR16)

• iPad/Android tablet controlled 16-input digital mixer for studio and live application
• Built-In Tri-Mode Wifi router for direct operation—no need for external routers
• Revolutionary Dugan-style Auto-Mixing automatically manages microphone gain sharing
• USB connector for uncompressed stereo WAV recording and playback
• 100-band Real Time Analyzer (RTA) for all channel and bus EQ's
• Rack ears and protection bumpers included for flexible rack and onstage applications
• 6 aux buses and main LR with inserts, full dynamics processing and 6-band parametric or 31-band graphic EQ
• 4 XLR aux outputs and 2 XLR main outputs plus phones connector
• MIDI In/Out allows controlling the mixer via MIDI equipment (incl. Mackie Control protocol)
• Internal switch-mode power supply for noise-free audio and low power consumption

X AIR XR16

The BEHRINGER X32 completely changed the game by rethinking what is possible from a digital mixer – and over 100,000 users are enjoying the results. Now, that same incredible technology has been incorporated into a small, but incredibly powerful, rack-mountable mixer that will forever change both the way you record – and the way you play live music.

Built-In Tri-Mode Wifi Router

Designed for the ultimate in mobility, the XR16 comes with an integrated Wifi module for direct control of your mixer’s functions – without the need to setup and configure an external router. The XR16 gives you the freedom to focus on your mix, while allowing you to move about the venue to experience what every part of the audience is hearing. Plus you can adjust live monitor wedges from the artist’s perspective – or better yet, let them mix their own IEMs and floor monitors via their own tablets.

USB Connectivity and Stereo Recording

The front panel USB type-A connector makes the XR16 not only an amazingly powerful digital mixing solution, but also allows recording your live stereo tracks directly to attached USB flash media or harddrives. Dial in the perfect live mix with effects and zero-latency, while sending a dedicated stereo mix to your thumb drive for recording, or play background music in a break.

Whether you’re making rock history in the studio, or you want to capture intimate live performances – it’s never been easier to record stunning tracks with exceptional clarity.

Product description

• Premium ultra-low noise, high headroom analog mixer
• 4 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
• 4 studio-grade compressors with super-easy "one-knob" functionality and control LED for professional vocal and instrumental sound
• Neo-classic "British" 3-band EQs for warm and musical sound
• New studio-grade FX processor with 16 editable presets including reverb, chorus, flanger, delay, pitch shifter, multi-effects, Tap function and storable user parameter settings.Phantom Power : +48 V Phantom

User questions & answers

Question:	Has anybody in the last few months had a problem with the FX board? I had an older behringer that had problems with the capacitors
Answer:	I haven't taken it apart to check, but it basically just splits the same signal into two outputs so I would expect its wired in parallel.
Question:	how many tracks
Answer:	This not for sending 1 thing to 2 outputs, this is to put 2 things in and send to 1 output. Like a mic and a guitar to 1 amp.
Question:	Can you record multiple tracks to a computer simultaneously and edit those independant tracks later? Or does it just record 1 stereo audio
Answer:	Yes
Question:	Got mine this week - and have discovered that the only way you can hear music from your PC at the same time you're playing is with headphones
Answer:	Yes, this will work with any 1/4" TS cable, which is cool because you can choose any color/ length/ right angle/ straight cord you want. It is a passive switch - just plug in and play (or switch channels). HTH

Product features

XENYX X1222USB

Premium 16-Input 2/2-Bus Mixer with XENYX Mic Preamps & Compressors, British EQs, 24-Bit Multi-FX Processor and USB/Audio Interface.

The compact XENYX X1222USB mixer allows you to effortlessly achieve premium-quality sound. Channels 1 - 4 feature our XENYX Mic Preamps, renowned for their pristine performance, plus 2 of the 4 stereo channels accept XLR inputs, as well as Line-Level sources. All mono channels get our ultra-musical 'British' 3-band EQs and easy-to-use 'one-knob' compressors for the ultimate in punch and clarity. Add to this our 24-bit, dual engine Multi-FX processor with 16 editable, professional-grade presets that include reverb, chorus, flanger, delay, pitch shifter and multi-effects – and the X1222USB becomes an incredibly versatile mixer for your live performances.

But the XENYX X1222USB wasn’t just designed to handle your live gigs; it also provides the state-of-the-art tools you need to make stunning, professional-quality recordings. Along with their built-in USB/audio interfaces, the XENYX X1222USB comes with all the recording and editing software needed to turn your computer system into a complete, high- performance home recording studio.

Sonically Superior Mic Preamps

All XENYX mixers have one thing in common – great-sounding, high headroom XENYX mic preamps. These state-of-the-art mic pres represent a major step in the evolution of audio technology – and they can easily hold their own. XENYX preamps offer a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, XENYX mixers provide such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking.

Studio-Quality Compressor - Stairway to Heaven

Our studio-grade compressor is based on classic and famous studio equipment from the 70’s. This totally transparent and musical compressor design allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the highly visible status LED. The compressor increases sustain and gently smoothens out signal peaks, which is especially handy when you’re laying down the funk, à la slap and pop – or hammering home your most-aggressive metal lines. The resulting output level lets you unleash powerful and impact-laden bass lines, while still sitting right where you need to be in the mix!

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our XENYX mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

Built-in Digital Multi-FX Processor

Equipped with our studio-grade 24-bit Multi-FX processor, the X1222USB gives you 16 mind- blowing digital effect presets such as delay, chorus and reverb. Time-based functions can be entered manually by pressing the Tap button in tempo with the music. Apply them to any channel, as well as to the monitors and main output. Of course, if you have treasured outboard gear you’ve grown attached to, the X1222USB lets you integrate them into the mix – bypassing the built-in FX processor.

FBQ - Totally Feedback-Free

For more than 20 years, Behringer has designed and manufactured some of the most successful FBQ Feedback Elimination processors. Now you can own and enjoy the benefits of this technology, as we have integrated our revolutionary FBQ Feedback Detection System into this product, so your sound system is completely feedback-free, allowing you to focus on your performance. Utilizing an ultra-fast feedback detection system, this ingenious circuitry helps you recognize and tame feedback frequencies immediately. When feedback is sensed in a specific frequency range, the LED on the associated EQ fader illuminates, showing you at a glance which fader to lower to overcome the feedback. That simple!

Special Features

The X1222USB comes equipped with channel Inserts for inputs 1 – 4 for use with outboard FX, a stereo 7-band graphic EQ, which can be assigned to the main or monitor buses and our proprietary FBQ Feedback Detection System. Other features include full-sized faders for Monitor and FX Sends, our XPQ 3D stereo surround effect (creates a broader, enhanced stereo image), and a handy Voice Canceller function for removing vocals from pre-recorded media for 'instant-karaoke' applications.

Recording Bliss

There was a time when the recording process called for lots and lots of expensive gear, which meant the average musician had to buy time at a recording studio – and that time was pricey indeed. But modern technology has put personal recording well within the reach of virtually anyone with access to a computer. How do you get all that music flying around your brain into your computer? That’s where XENYX X1222USB comes in. Thanks to the built-in, bi-directional stereo USB audio interface, you can connect your X1222USB directly to your PC or Mac computer via a single USB cable. Now any signal source you connect to the mixer can be recorded directly to your hard drive. Which brings us to software...

Product description

Premium ultra-low noise, high headroom analog mixer

• Premium ultra-low noise, high headroom analog mixer
• Neo-classic "British" 3-band EQs for warm and musical sound. Maximum input level+12 dBu @ +10 dB gain Maximum input level 30 dBu
• Faders: 9 x 60mm Throw

User questions & answers

Question:	want to hook up three microphones (two wired rode procaster black mics) and one rode podcaster usb mic (white mic) would mixer work? what need extra
Answer:	Physical inputs can be routed to multiple channels. Routing is done after the pre-amp, so if you have it on 3 channel strips they all share the one pre-amp but all other channel settings are separate. I use this for my pastor, one channel for singing and the other speaking, allows me to have different EQ settings and compression.
Question:	So we are hosting a talk radio show, looking to upgrade board, the usb out will capture all sound from 4 mics to a single recording
Answer:	I bought a full X32 when it was first released in 2012. I bought an X32 rack in 2013. Other than the learning curve at the beginning when I first used it, its been smooth sailing. Both the desks have held up well in my rental inventory. I own a small sound rental/hire business and I have been using both units quite a lot at concerts, corporate events, weddings and festivals for the past 3 to 4 years. Nothing has broken on either of my units, but I generally work alone or with a well skilled partner so I baby my equipment YMMV.
Question:	What cord do I need to hook this up to my Mac
Answer:	X32 Consoles that are over about 12 months old (about July 2013) have an XUF card that has both a USB 2.0 and a Firewire 800 port. My console has that card, but I have since purchased two X32 Racks and their expansion card is the XUSB card and it only has a USB 2.0 port (something about Apple not supporting the Firewire chip set anymore). I have done a lot of recording with both the console and the racks and have not had any problems with either. The XUSB card will connect to your PC or Mac and do a full 32 IN and 32 OUT to your DAW such that the DAW can control the console with remote control. Basically you just need to make sure that the Head Amps for each track are sending a hot signal, but NOT CLIPPING. That will screw up a tracks recording faster than anything. You can use compressors in the DAW to recover from too weak a signal, but you can't do anything about a clipped signal. For DAW's, I have used Presonus Studio One, Tracktion64, Pro Tools, and Apple Logic Pro X. I usually capture the tracks from a live recording using Studio One, but always do my mix down and mastering with Apple Logic Pro X. I have recorded 32 tracks without any problem.
Question:	does the usb work both ways? meaning can i hook up to my computer to play music through the mixboard from my virtual dj program
Answer:	I am not familiar with the Xenyx 802 but any 1/4-inch INPUT receiving jack for a single channel on the mixer should allow you to send the signal to the phone to any other recording device connected on the output side of the mixing board. Just remember that the signal being sent to record will be mono,

Product features

XENYX 1204USB

Premium 12-Input 2/2-Bus Mixer with

XENYX Mic Preamps & Compressors,

British EQs and USB/Audio Interface

The compact XENYX 1204USB mixer allows you to effortlessly achieve premium-quality sound, thanks to its 4 onboard studio-grade XENYX Mic Preamps and ultra-musical “British” channel EQs. Add to this our easy-to use “one-knob” compressors, which provide total dynamic control for the ultimate in punch and clarity, while respecting all the power and emotion you pack into every note – and the 1204USB becomes an incredibly versatile mixer for your live performances. But the XENYX 1204USB isn’t just designed to handle your live gigs; it also provides the state-of-the-art tools you need to make stunning, professional-quality recordings. Along with the built-in USB/audio interface, the 1204USB comes with all the recording and editing software needed to turn your computer system into a complete, high-performance home recording studio.

Sonically Superior Mic Preamps

The XENYX 1204USB gets its name from our legendary, high headroom XENYX mic preamps, which have been praised by audio engineers all over the world. These state-of-the-art mic pres represent a major step in the evolution of audio technology – and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps. XENYX preamps offer a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, the XENYX 1204USB provides such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking.

One-Knob Compression

Ask professional sound engineers what their favorite piece of external processing gear is and the majority response will be virtually unanimous – dynamic compression. What is compression? We’re glad you asked. Compression essentially limits the dynamic range of a signal, lowering the level of loud sounds and turning up softer sounds, to achieve sonic balance. But applying compression is a delicate art that many novice, and even intermediate, sound techs find challenging. Our “one-knob” compression is available on all mono channels and is easy to operate, even for entry-level users. With this one knob, you can easily dial in the perfect amount of compression for instruments and vocals, creating powerful mixes with punch and clarity. This is indeed a rare feature for products in this class – but standard on the XENYX 1204USB mixer.

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our XENYX mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

Recording Bliss

There was a time when the recording process called for lots and lots of expensive gear, which meant the average musician had to buy time at a recording studio – and that time was pricey indeed. But modern technology has put personal recording well within the reach of virtually anyone with access to a computer. How do you get all that music flying around your brain into your computer? That’s where the XENYX 1204USB mixer comes in. Thanks to the included bidirectional stereo USB audio interface, you can connect directly to your PC or Mac computer via a single USB cable. Now any signal source you connect to the mixer can be recorded directly to your hard drive. Which brings us to software…

Free Software Would Be Nice!

Because you’ll want to take full advantage of your XENYX 1204USB’s recording and podcasting potential, we’ve included all the software you’ll need for audio recording, editing and even podcasting – all free of charge and downloadable from behringer.com. You’ll be ready to go live on your PC or Mac right out of the box! We’ve also provided a free download of more than 150 virtual instruments and FX plug-ins – turning your computer into a powerful home-based or mobile recording studio from input to output.

Compose. Record. Mix. Share.

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional-grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources. As our way of saying “Thank You” when you register your XENYX X1204USB at behringer.com, we’ll reward you with a complimentary download code for the full version of Tracktion. Recording and editing couldn’t be easier. To learn more, visit tracktion.com/support/videos. Share the Love. Visit tracktion.com for more.

Amazing Value

No matter what your audio mixing needs, the XENYX 1204USB provides the performance and features that can take your talent to the next level, at a price sure to amaze you. Professional sound quality, our legendary XENYX mic preamps, British EQs, our easy-to-use “one-knob” compressors and built-in USB connectivity make the XENYX 1204USB ideal for both your live gigs and recording. Try one on today – we have one available in your size!