12 best in ear monitor systems

Product description

IEM1200 wireless In Ear Monitor System 2 Channel 2/4 Bodypack Monitoring



LCD display shows clear working status

Metal Bodypack Receive

Low battery remind of bodypack receivers

2 power switch control

Have a mout in the both side of the machine, easy to setup

Strong signal, UHF frequency

Digital tone key locking technology to avoid possible interference

40 preset channels separately by 4 groups, can be adjustable

Effective distance:150M

Audio Output:Mono



Specification: Transmitter

Case specification:standard 1U

Case material:metal panel

Oscillation mode:PLL synthesized

Frequency stability:±0.005%

Frequency range:550-580MHz

Frequency interval:32MHz

Preset Channel:40 channels separately set 4 groups

Operate mode:manual adjust

Max Deviation:±48KHz

Frequency response:50Hz~15KHz±3dB

Transmit output power:100mW(50Ω)

Harmonic radiation:＜4NW

AF input:XLR,φ6.35mm jack

Earphone load impedance:≥16Ω

Current consumption:DC 12V/250mA

Antenna socket:TNC socket(50Ω)



Receiver:

Oscillation mode:PLL Synthesized

Frenquency range:550-580MHz

Preset channel:40 channels separately set 4 groups

Operate mode:manual adjust

Receiving mode:single tuning

Sensitivity:deviation 25 khz,with conecting 7dBuV,S/N＞78dB

Max Deviation:±48KHz

Comprehensive T.H.D:＞94db(1KHZ-A)

Comprehensive Reaponse::50Hz~15KHz±3dB

Output power:(32Ω)2x35mw@1KHz

Earphone load impedance:≥16Ω Out socket:φ3.5mm stereo earphone socket Volume output adjusts:adjust when using Power box :batteries AAX2 Current drain:3V/120mA(Under the mediant degrees of the volume control)



Package Include(Whole system):

Transmitter × 1

Bodypack receiver(with earphone) × 2/4

Antenna × 2

Cable Line × 4

Power Adapter × 1

User Manual × 1

• UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Improved comprehensive performance, anti-frequency drop, anti-series frequency. Frequency range: 550 MHz-580 Mhz. In the 32MHz frequency band, the preset 40 frequencies can be switched at will. The dynamic expansion circuit greatly improves the signal-to-noise ratio
• USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect
• DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable
• WIRELESS RANG AND FREQUENCY RANG-IEM1200 in ear monitor and receiver system offers tabletop stage monitoring with a wireless range of up to 300 feet,THE normal can be 250FT-350F.Also improve the signal-to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again
• QUALITY AND TECHNOLOGY GUARANTEED-Using advanced circuit design,clear the receiving blind angle to make the system's receiving signal steady.The system is strong, because of the housing is made by tough metal material.It is the best choice of stage performance monitor product.We also have 30 days no reason return and 3 years warranty

User questions & answers

Question:	What kind of road case or antenna system would you use for these abs if you had 5 diffrent frequency in the road case
Answer:	Our IEM host (receiving) can be tuned, you can choose a frequency randomly, and adjust the frequency of the bodypack to the same as the host (receiving).
Question:	Can I use any type of headphones for the body pack
Answer:	Yes. Must be a mono jack though
Question:	Is there a way to front mount the antennas
Answer:	Not directly to the box. You’ll have to use cables and an antenna mounting bracket. Takes up another U in your rack somewhere.
Question:	I have some Shure in ear headphones, will it work with the body pack
Answer:	I don't see why not, as long as it has a1/8 jack you can use any headphones really , I don't like in ears so im using my tasam studio headphones which works fine

Product description

The new as-1400 is the latest addition to Galaxy audio’s highly acclaimed line of wireless personal monitors, offering high end features and performance at a very affordable price. The transmitter features stereo XLR/1/4" Inputs, headphone output with volume control, input level control, and LCD display for channel and input level. The receiver features mixed mono mode for your own personal mix, volume, and an LCD display with channel, battery level, and RF level. Galaxy audio’s new comfort Eb4 premium ear buds feature titanium drivers, extended bass response, aluminum alloy construction, and now come standard with all wpm models. The as-1400 is perfect for the working musician, house of worship or any application requiring an affordable, reliable wpm system. The mixed mono feature allows performers to adjust the balance of the left and right audio signals sent from the transmitter right on the body pack. With mixed mono: the performers can have their vocals in input 1 and the band mix in input 2 and adjust the volume of each independently to create their own personal mix, or you can send two different monitor mixes from the board so each performer can decide which mix they want to hear on their belt pack.

• Featuring Mixed mono mode
• Multiple receivers can be used with 1 transmitter; 275 selectable channels
• Uhf phase Locked loop
• Backlit LCD (displays channel number and Freq.)
• Stereo or mono transmission; 300' Range

Product features

Galaxy Audio AS-1400-M

The new AS-1400 is the latest addition to Galaxy Audio’s highly acclaimed line of Wireless Personal Monitors, offering high end features and performance at a very affordable price. The transmitter features stereo XLR/1/4" inputs, headphone output with volume control, input level control, and LCD display. The Receiver features volume control and an LCD display. The AS-1400 is perfect for the working musician, House of Worship or any application requiring an affordable, reliable WPM system.

Mixed Mono Mode

The Receiver features Mixed Mono Mode for your own personal mix. The Mixed Mono feature allows performers to adjust the balance of the Left and Right audio signals sent from the transmitter right on the body pack. With Mixed Mono:

The performers can have their vocals in Input 1 and the band mix in Input 2 and adjust the volume of each independently to create their own personal mix, or you can send two different monitor mixes from the board so each performer can decide which mix they want to hear on their belt pack.

A Brief History of Galaxy Audio

Galaxy Audio began in 1977 with Superior Sound, operated by Brock Jabara and his partner Jim Pearce. They both had eight years of concert sound experience, and their rental products flanked the stages of concert halls and arenas all over the country, providing sound for Aretha Franklin, The Bee Gees, Janis Joplin, James Brown and countless others.

Brock and Jim soon developed the Hot Spot Personal Monitor. It was immediately a hit among musicians who used them. It was obvious that with some refinement, the new products could fill a long-standing void in the marketplace. Superior Sound began to metamorphose from speaker rental company to speaker manufacturing company. Galaxy Audio was born.

Galaxy Audio began enhancing the performance and quality of their product and expanded to include many new products and categories. We have experienced growth in areas we never expected, and our goal remains to provide great products and service for many years to come.

Product description

The AWR6305U5 is a Wireless Receiver for the Audio2000'S tm AWM6304U, AWM6305U and AWM6306U Professional UHF Wireless In-Ear Monitoring System (with 100 Adjustable Frequencies) Includes: 3. 5mm Stereo Earphone Jack 3. 5mm Line-Out Jack Built-in Audio Limiter

• ***500 MHz range***
• Audio output: line level x 2, XLR audio input: 1/4" phone jacks X2
• Headphone output: 1/4" stereo phone jack with adjustable volumeEar-buds included
• Pll Synthesized, FM stereo modulation

User questions & answers

Question:	I have had two of these die recently, less than 6 months old. Who do I call for warranty
Answer:	Good day, and thank you for your question. We can be reached at 877-736-6434, option 3. If you would like to call us while with the unit, we are glad to troubleshoot in real time. Hopefully this helps, and have a good afternoon.
Question:	Viene con su caja
Answer:	As long as the new transmitter is in the same frequency range A1
Question:	I have Shure system that uses that uses the 518-554 mhz range. Can this receiver be used for that system
Answer:	Yes you can, you set pack 1 all the way to the left and pack 2 all the way to the right.
Question:	does it come with a receiver
Answer:	I just compared the dimensions of this system with that of my Galaxy that I have. This Sennheiser unit is about double the depth of my unit (width and height are about the same). That being said, it should still fit as I have plenty of room to also keep my cables in the bag right behind the transmitter. I've been using this bag for just over a year and am just as happy with it as when I originally ordered it!

Product features

Audio2000'S AWR6305U5 In-Ear Audio Monitor Receiver

The AWR6305U5 is a Wireless Receiver for the Audio2000'S AWM6304U, AWM6305U and AWM6306U Professional UHF Wireless In-Ear Monitoring Systems (with 100 Adjustable Frequencies)

• Audio output: line level x 2, XLR audio input: 1/4" phone jacks X2.
• Headphone output: 1/4" stereo phone jack with adjustable volume.
• Built-In Audio Limiter.
• PLL Synthesized, FM stereo modulation.

Product description

Traditional wireless monitors use MPX technology (which utilize a single frequency to send encoded stereo content), a similar technology used in FM broadcast, thus limiting 100% separation between the right and left channel. Vocopro item-digital uses two separate Digital frequencies to send out stereo/dual mono signal to each stereo body pack receiver, Providing the user with a true stereo experience. 24 bit digital means the user receives crisp highs, thumping lows, and the best possible full range sound for the money. The item-digital is now available in 4, 12 or 50 packs ideal for performing, practicing, production, and assisted listening or translating. Get the best possible sound for the money with Vocopro item-digital!

• 24 bit digital, dual frequency (True stereo) transmitter and receiver
• Up to 9 sets are designed to work together without interference
• Operating in the 900MHz range, free of TV broadcast and Wi-Fi interference
• Rugged, rechargeable all metal body-pack receiver will work with most headphones (each receiver includes ie-9 in-ear headphones)
• Battery: built-in lithium ion 3. 7V 1380mAh (quantity 2 per body pack receiver)

User questions & answers

Question:	Can I buy the receivers separately? If so, where
Answer:	i still think they will work.
Question:	i need a 6 reciever setup can you give me a price for that
Answer:	it should fit the SG but would be a huge downgrade from stock tuners.. even an epiphone uses grovers...
Question:	Can i connect a single xlr to transmitter and have audio play on both channels on the receiver
Answer:	They are meant for the tuning holes that are smaller than average. If your guitar has Grover tuners, than they won't work. But if your Gibson or epiphone has klaus on deluxe tuners, they should fit. To let you know, I recorded tuners that were the same basic shape and look, but the color was more of a darker green. That's fine for me because I am using them on a project guitar but if you are buying them based on the looks of the cream tuner then I would search elsewhere. All in all they do work well
Question:	How can i , on mono, have two separate mixes on two different receivers? do you know? like i can connect all 4 of the receivers i have to the same cha
Answer:	No these are all one piece the heads are not removable

Product description

The PSM300 Stereo Personal Monitor System delivers detailed 24-bit digital audio and reliable wireless freedom to every corner of the stage. Patented Audio Reference Commanding ensures the clearest sound, with ultra-low noise and no artifacts. Dependable wireless coverage extends over 300 ft. (90 m) of range and eliminates dropouts. Easy to setup and operate, PSM300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use Mix Mode technology or stereo mode to create a personal mix from two channels of audio. P3TR112GR systems include SE112 Sound Isolating Earphones for great sound with deep bass and up to 37 dB of ambient noise reduction.

• Featuring SE112 Sound Isolating Earphones, P3TR112GR provides great sound and simple setup for entry-level users
• The P3TR112GR is part of the PSM300 wireless systems family
• PSM300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage; patented Audio Reference Commanding ensures the clearest sound, with ultra-low noise and no artifacts
• Easy to setup and operate, PSM300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel; adjust the volume and use Mix Mode technology or stereo mode to create a personal mix from two channels of audio
• Includes P3R, P3T, SE112, rack mount and hardware kits, 1/4 wave antenna, BNC bulkhead adapter, BNC cable, power supply, 2 AA batteries, zipper bag, and user guide

Product features

How It Works

Easy to set up and operate, the Shure PSM 300 in-ear personal monitoring system puts total freedom within reach of musicians at every level. Customizable two-channel mix and volume lets you hear every note in detailed, 24-bit digital audio from anywhere on the stage. All PSM 300 systems include the P3T transmitter, which is housed in a rugged, all-metal chassis, your choice of two bodypack receivers, and Shure Sound Isolating Earphones.

Why It's Better

Up to 15 channels and up to 24 MHz of tuning bandwidth with easy-to-use pre-programmed Groups and Channels

The Shure P3T wireless transmitter is housed in a rugged, all-metal chassis that goes wherever your music takes you. Send a stereo or mono mix wirelessly up to 300 feet away without artifacts and dropouts.

Choose between the reliable P3R bodypack receiver or move up to the P3RA bodypack receiver with its all-metal construction, LCD display, and rechargeable battery option. Also available in convenient Twinpack configurations for up to two performers.

Quality That's In The Details

• Up to 15 channels that are simple to use due to pre-programmed Groups and Channels
• Send a stereo or mono mix wirelessly to performers onstage
• Detailed, 24-bit digital wireless audio over a 90-meter range
• One-touch IR sync instantly links transmitter to bodypack receiver
• MixMode delivers L/R levels independently to create a personal mix for each bodypack
• Up to 7 hours of use from two AA batteries or take advantage of Shure rechargeable battery options (P3RA bodypack only)
• Two bodypack receivers to choose from depending on feature and budget needs

PSM 300

The PSM300 Stereo Personal Monitor System delivers detailed 24-bit digital audio and reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts. Dependable wireless coverage extends over 300 ft (90 m) of range and eliminates dropouts. Easy to setup and operate, PSM300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel.

Step 1

Route audio signals from the stage to a mixer or PA System

Step 2

Create an instrument mix and a vocal mix, then route each to an input channel on the P3T transmitter

Step 3

Monitor one or both mixes through earphones connected to a P3R or P3RA bodypack receiver

Step 4

Adjust the volume and MixMode knobs to create a personal mix

P3T

Dependable wireless transmission and 24-bit digital audio deliver a superior personal monitoring mix for every performance. Send 2 channels of audio to a bodypack receiver up to 300 feet away, with patented Audio Reference Companding to ensure transparent sound quality with no artifacts or dropouts. The rugged, half rack transmitter features easy front-panel controls including one-touch sync and input level knob to enable quick setup and easy operation.

P3R or P3RA

The P3R and P3RA are wireless stereo bodypack receivers for use with the PSM300 Personal Monitor System. With 24-bit digital audio clarity and up to 300 ft of range (90 m), the P3R/P3RA offer reliable wireless freedom that covers every corner of the stage. Simply connect a set of earphones and adjust the controls to create a wireless personal mix. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.

Product description

The as-950 wireless personal monitor system offers reliable quality and exceptional value. The receiver features a 50mW x 2 output with RF and stereo indicator. The transmitter features L/R level display, channel LCD display with channel up and down select, stereo XLR/ 1/4" Inputs and a headphone output with volume control. The as-950 also offers 16 selectable UHF frequencies. Eb4 ear buds feature titanium drivers, extended bass response, aluminum, alloy construction and now come standard with all wpm models. This system comes in options of a single system, Twin pack system, and band Pack system. The as-950 is perfect as an affordable in-ear monitor solution for the entry level user while providing a high quality sound for an economical price. The twin pack and band Pack systems makes it easy for any duo or band to get personal. The Twin pack system includes two receivers and one transmitter. The band Pack system includes four receivers and one transmitter. They are designed to get the duo or whole band Wireless in one package. The as-950-2 and as-950-4 will allow a duo or band to send one Stereo mix to 2 or 4 individuals. Additional transmitters may be purchased at a later date to add mixes. An unlimited number of receivers may be added at any time.

• Perfect as an affordable in-ear monitor solution for the entry level user while providing a high quality sound for an economical price
• The receiver features a 50mW x 2 output with RF and stereo indicator
• The transmitter features L/R level display, channel LCD display with channel up and down select, stereo XLR|1/4" inputs and a headphone output with volume control
• The Galaxy Audio AS-950 Wireless Personal Monitor system also offers 16 selectable UHF frequencies
• The Galaxy Audio EB4 ear buds feature titanium drivers, extended bass response, aluminum, alloy construction and come standard with all WPM models
• Additional transmitters may be purchased at a later date to add mixes, and an unlimited number of receivers may be added at any time

Product features

Galaxy Audio AS-950-4

The AS-950 Wireless Personal Monitor system offers reliable quality and exceptional value. The receiver features a 50mW x 2 output with RF and stereo indicator. The transmitter features L/R level display, channel LCD display with channel up and down select, stereo XLR / 1/4" inputs and a headphone output with volume control. The AS-950 also offers 16 selectable UHF frequencies. EB4 ear buds feature titanium drivers, extended bass response, and aluminum alloy construction.

A Brief History of Galaxy Audio

Galaxy Audio began in 1977 with Superior Sound, operated by Brock Jabara and his partner Jim Pearce. They both had eight years of concert sound experience, and their rental products flanked the stages of concert halls and arenas all over the country, providing sound for Aretha Franklin, The Bee Gees, Janis Joplin, James Brown and countless others.

Brock and Jim soon developed the Hot Spot Personal Monitor. It was immediately a hit among musicians who used them. It was obvious that with some refinement, the new products could fill a long-standing void in the marketplace. Superior Sound began to metamorphose from speaker rental company to speaker manufacturing company. Galaxy Audio was born.

Galaxy Audio began enhancing the performance and quality of their product and expanded to include many new products and categories. We have experienced growth in areas we never expected, and our goal remains to provide great products and service for many years to come.

Product description

High Quality

• Includes 1 as-950t, 1 as-950r, Eb4 ear buds, single/dual rack kit, antenna, and power supply
• 16 selectable UHF frequencies
• Stereo or mono transmission
• Multiple receivers can be used with 1 transmitter
• 200' Range

User questions & answers

Question:	What’s the MHz
Answer:	Yes
Question:	Can i use 3 or kore of these each sending different signal
Answer:	500k sounds better to me.
Question:	Can you use this twin pack to get two separate customized mixes for two people (or just one mix for both
Answer:	Yes ,unless you kinda know what you are doing and have all needed pots.
Question:	What's the difference between as950-n and as950-p
Answer:	Yes it comes with wires with plugs for both pickups .

Product features

Galaxy Audio AS-950N

The AS-950 Wireless Personal Monitor system offers reliable quality and exceptional value. The receiver features a 50mW x 2 output with RF and stereo indicator. The transmitter features L/R level display, channel LCD display with channel up and down select, stereo XLR / 1/4" inputs and a headphone output with volume control. The AS-950 also offers 16 selectable UHF frequencies. EB4 ear buds feature titanium drivers, extended bass response, and aluminum alloy construction.

A Brief History of Galaxy Audio

Galaxy Audio began in 1977 with Superior Sound, operated by Brock Jabara and his partner Jim Pearce. They both had eight years of concert sound experience, and their rental products flanked the stages of concert halls and arenas all over the country, providing sound for Aretha Franklin, The Bee Gees, Janis Joplin, James Brown and countless others.

Brock and Jim soon developed the Hot Spot Personal Monitor. It was immediately a hit among musicians who used them. It was obvious that with some refinement, the new products could fill a long-standing void in the marketplace. Superior Sound began to metamorphose from speaker rental company to speaker manufacturing company. Galaxy Audio was born.

Galaxy Audio began enhancing the performance and quality of their product and expanded to include many new products and categories. We have experienced growth in areas we never expected, and our goal remains to provide great products and service for many years to come.

Product description

The PSM300 Twin Pack Pro is the ideal monitoring solution for up to two performers that provides a convenient, durable metal construction multi-body pack system-in-a-box (optional use with SB900A rechargeable battery) with Sound Isolating earphones designed for clear, precise stereo mixes on stage.

• The ideal monitoring solution with Metal body packs for up to two performers
• The PSM300 Twin Pack Pro is the ideal monitoring solution for up to two performers that provides a convenient, durable metal construction multi-body pack system-in-a-box (optional use with SB900A rechargeable battery) with Sound Isolating earphones designed for clear, precise stereo mixes on stage.
• Perfect for musicians

Product features

How It Works

Easy to set up and operate, the Shure PSM 300 in-ear personal monitoring system puts total freedom within reach of musicians at every level. Customizable two-channel mix and volume lets you hear every note in detailed, 24-bit digital audio from anywhere on the stage. All PSM 300 systems include the P3T transmitter, which is housed in a rugged, all-metal chassis, your choice of two bodypack receivers, and Shure Sound Isolating Earphones.

Why It's Better

Up to 15 channels and up to 24 MHz of tuning bandwidth with easy-to-use pre-programmed Groups and Channels

The Shure P3T wireless transmitter is housed in a rugged, all-metal chassis that goes wherever your music takes you. Send a stereo or mono mix wirelessly up to 300 feet away without artifacts and dropouts.

Choose between the reliable P3R bodypack receiver or move up to the P3RA bodypack receiver with its all-metal construction, LCD display, and rechargeable battery option. Also available in convenient Twinpack configurations for up to two performers.

Quality That's In The Details

• Up to 15 channels that are simple to use due to pre-programmed Groups and Channels
• Send a stereo or mono mix wirelessly to performers onstage
• Detailed, 24-bit digital wireless audio over a 90-meter range
• One-touch IR sync instantly links transmitter to bodypack receiver
• MixMode delivers L/R levels independently to create a personal mix for each bodypack
• Up to 7 hours of use from two AA batteries or take advantage of Shure rechargeable battery options (P3RA bodypack only)
• Two bodypack receivers to choose from depending on feature and budget needs

PSM 300

The PSM300 Stereo Personal Monitor System delivers detailed 24-bit digital audio and reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts. Dependable wireless coverage extends over 300 ft (90 m) of range and eliminates dropouts. Easy to setup and operate, PSM300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel.

Step 1

Route audio signals from the stage to a mixer or PA System

Step 2

Create an instrument mix and a vocal mix, then route each to an input channel on the P3T transmitter

Step 3

Monitor one or both mixes through earphones connected to a P3R or P3RA bodypack receiver

Step 4

Adjust the volume and MixMode knobs to create a personal mix

P3T

Dependable wireless transmission and 24-bit digital audio deliver a superior personal monitoring mix for every performance. Send 2 channels of audio to a bodypack receiver up to 300 feet away, with patented Audio Reference Companding to ensure transparent sound quality with no artifacts or dropouts. The rugged, half rack transmitter features easy front-panel controls including one-touch sync and input level knob to enable quick setup and easy operation.

P3R or P3RA

The P3R and P3RA are wireless stereo bodypack receivers for use with the PSM300 Personal Monitor System. With 24-bit digital audio clarity and up to 300 ft of range (90 m), the P3R/P3RA offer reliable wireless freedom that covers every corner of the stage. Simply connect a set of earphones and adjust the controls to create a wireless personal mix. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.

Product description

The IE 40 PRO’s newly developed driver system ensures powerful monitoring sound at a price to suit even the beginner’s budget. The dynamic broadband transducer guarantees distortion-free precision even at extreme volumes, a homogeneous, harmonious frequency spectrum and a strong bass foundation. The compact 10mm diaphragm permits an ergonomic construction with a secure fit and high level of wearing comfort. The robust design makes the earbuds fit for stage use, even their cable duct.

• ·         Innovative, dynamic 10mm broadband transducer for warm, high-resolution sound
• ·         Reduces acoustic stress through precise, dissonance-free reproduction even at maximum sound levels
• ·         Good fit and wearing comfort, thanks to ergonomic ear mold design with flat profile
• ·         Replaceable cable, fit for stage use and with internal cable duct (patent pending), reliable connection and reinforced ear hook

User questions & answers

Question:	This is going to sound silly, do I have to plug them into anything? Are they meant to work stand-alone, or need anything
Answer:	They plug into any 1/4" headphone jack, don't need any kind of additional hardware.
Question:	is it memory foam
Answer:	It comes with four pairs of tips and one pair is made of what I think is foam.
Question:	For 100 bucks, should i pick 4 cca c10 off aliex instead these
Answer:	Not sure what 4 cca c10 are.
Question:	What is the connection type, mmcx
Answer:	1/8" plug

Product features

IE 40 PRO

Dynamic in-ear monitoring headphones with precise sound at both low and high sound pressure levels; for maximum control on loud stages. Secure fit thanks to ergonomic design and a robust construction suitable for stage use.

Secure fit and high level of wearing comfort

Innovative single driver design enables a slim and ergonomic construction. The design has been optimized; checked against hundreds of ear shapes and redesigned for a universal fit using any of the three foam adapters.

For musicians, sound engineers and DJs

The advanced driver system brings a considerably expanded sound spectrum to the ears of musicians, sound engineers and DJs. Excellent shielding thanks to the optimized earpiece and flexible silicone and foam tips.

Improves the way you perform by enhancing the way you hear

A compact design combines a secure fit with excellent wearing comfort. It’s robust construction is designed to be suitable for the rigors of stage use from the connection to the cable duct.

Resonates easily even at maximum sound levels

Innovative, dynamic 10mm broadband transducer for powerful, precise monitoring. Dynamic driver system reduces acoustic stress factors through homogenous, distortion-free reproduction.

Without monitoring sound, there is no performance.

The innovative diaphragm delivers a warm sound, yet powerful and precise, even in extremely loud environments. Even at maximum sound pressure levels, the signal remains distortion-free and precisely defined.

A superior monitoring device for musicians and DJs

A compact design combines a secure fit with excellent wearing comfort. It’s robust construction is designed to be suitable for the rigors of stage use from the connection to the cable duct.

Meets high expectations and withstands high stresses

We have even reinvented stage-compatible cabling – the internal cable duct is a unique feature (patent pending).

Small but mighty. Comfortable.

Excellent shielding thanks to optimized earpiece and flexible silicone and foam tips. There are no distortions because the special diaphragm – unlike the more rigid drive principle of the multi-way drivers – resonates easily even at maximum sound levels.

Product description

This is for one complete in-ear monitoring system consisting of one transmitter, one receiver and the required accessories. We also carry individual XVive transmitters and receivers so you can build a system to suit your needs. We stock other systems from other brands, including stereo models, but this is one of the most affordable and easy to use.The UVive U4 In-Ear Monitor Wireless System Set provides clear sound for stage performers just where they need it, which helps boost your overall performance quality. As a portable wireless system, you don't need to set up much. Just plug-and-play to quickly build your monitoring system. This is an affordable solution that doesn't take up much space and is quickly rechargeable via USBBatteries and chargingU4 includes a USB charging cable that connects to any USB charger adapter or other USB charging devices.Pair transmitter and receiverU4 has six channels. Use the channel switch button to switch the channel. Set the receiver channel to the same as the transmitter and you're good to go. The blue Led signal on the receiver will stay be on when the connection is successful.Single transmitter and multiple receiversIf you want to add more receivers, just set the receivers to the same channel as the transmitter. There's no hard limit to how many receivers can connect to one transmitter, but you'll all be sharing the same mono mix.Note: Ear-buds not included.

• U4 Transmitter - U4 Receiver - USB Cable - XLR Male to 1/4 " TS Male Adapter - Manual - Bag - (Ear-Buds Not Included) - XVIVE 1 Year Limited Warranty
• 2.4Ghz wireless in-ear monitor system
• Create your personal or team monitor system
• Send audio wirelessly to performers onstage
• More than 90 feet range

User questions & answers

Question:	can i add more receivers to this system? wich model could be
Answer:	Doubt anyone can answer this honestly. I use Netgear's Nighthawk R7000 for glitch-free communication between modem and router.
Question:	Is it stereo
Answer:	Power supply is listed as 12V, 2.5A, which would be a max of 30W.
Question:	is this rack mountable
Answer:	Arris SB8200 is equipped with a Broadcom BCM3390 chipset, 128 MB / 16 MB of flash memory and 3 GB of RAM. Netgear has also equipped the CM1000 with a Broadcom BCM3390 chipset, 128 MB of flash memory and 256 MB of RAM.It’s nice to see that both Arris and Netgear have gone past the Intel Puma chipset line (especially the Puma 6) and have used a Broadcom-based chipset this time (this choice has removed any possible latency issues which plagued the previous models, both Arris SB6190 and CM700). http://www.mbreviews.com/arris-sb8200-vs-netgear-cm1000/
Question:	How long do batteries last
Answer:	The 6 gbps is a theoretical top speed for Docsis 3.1. You are correct that this lan port only provides 1 gbps. This modem is currently useful for people with higher than 300 mbps internet connections via cable internet (however, it does work perfectly with slower internet connections as well). One great example is Xfinity's gigabit internet, which provides a download speed of 1 gbps, and this modem is perfect for that.

Product features

In-Ear Wireless Monitor and Receiver System

The Portable Receiver auto searches for the best channel for a reliable Performance and Distortion-Free sound and it also automatically syncs to the transmitter. Hands-free which makes it ideal for karaoke, video & voice recording, interviews, conference or stage presentation

COMPACT AND WIRELESS

Pyle in ear monitor and receiver system offers tabletop stage monitoring with a wireless range of up to 330 feet Kit includes audio system transmitter, digital belt-pack receiver, and in-ear headphones

FREEDOM OF MOVEMENT

Wireless in ear monitors allow for uncluttered stage sets and a reliably consistent sound wherever you move Ideal for use by singers and musicians, this in ear monitor system for bands features an adjustable TNC antenna to extend and increase wireless range plus a clear digital LCD front panel display for at-a-glance monitoring

IEM (In Ear Monitor) DESIGN

Upgrade the sound quality of your stage and studio productions with the best in ear monitors available Enjoy the latest in ear monitor and receiver system technology, with heightened sound performance.

BATTERY OPERATED

Battery operated In-Ear Wireless Monitor and Receiver System are designed for extended use providing excellent audio quality with its omni-directional audio capture and projection of the subject with simple & hassle-free operation.

Product description

Pyle Model : PDWMN49.5In-Ear Monitor & Receiver Stage SystemPro Audio In-Ear Monitor & Receiver - Stage IEM Mic System with Selectable Frequency Features:Compact Stage Monitoring SystemIEM (In Ear Monitor) DesignHassle-Free Operation & Simple ControlsUHF Ultra-Wide Audio Signal TransmissionReliable, Distortion-Free Performance (100) Pre-Set Selectable FrequenciesFront Panel Digital LCD Display Combo XLR + 1/4’’ Audio Input Jacks1/4’’ (6.3mm) Headphone JackRotary Volume ControlAF, RF, Channel & Frequency DisplayAdjustable TNC Antenna for Extended Range PLL Synthesized CircuitPerfect for On-Stage or In-Studio UseWhat’s in the Box:IEM Beltpack TransmitterAudio Receiver BaseHeadphonesPower Adapter x ‘AA’ BatteriesDetachable Antenna1/4’’ (6.35mm) Audio CableTechnical Specs:IEM Wireless Range: Up to 330’+ ft.Transmission Methods: FM, MonoRF Output Power: 5mW, 10mW, 30mW, 100mWS/N Ratio: >105dB, Dynamic Range: >100dBBattery Powered Beltpack, Requires x ‘AA’, IncludedPower: 110/220V (DC12-18V Power Adapter)System Transmitter Dimensions (L x W x H): 8.3’’ x 6.7’’ x 1.7’’ -inchesBeltpack Receiver Dimensions (L x W x H): 4.3’’ x 2.5’’ x 0.8’’ -inchesThe Pyle In-Ear Monitor & Receiver System - Stage Performance IEM Mic System with Selectable Audio Frequency - Compact Tabletop Stage Monitoring System - Hassle-Free Operation & Simple Controls - UHF Ultra-Wide Audio Signal Transmission - Reliable, Distortion-Free Performance - (100) Pre-Set Selectable Frequencies - Front Panel Digital LCD Display - Combo XLR + 1/4’’ Audio Input Jacks - 1/4’’ (6.3mm) Headphone Jack - Rotary Volume Control - AF, RF, Channel & Frequency Display - Adjustable TNC Antenna for Extended Range - PLL Synthesized Circuit - Perfect for On-Stage or In-Studio Use - Wireless Range: Up to 330’+ ft. - What’s in the Box: - Audio System Transmitter - Digital Beltpack Receiver - Headphones - x ‘AA’ Batteries - Detachable Antenna - 1/4’’ (6.35mm) Audio Cable.

• COMPACT AND WIRELESS - Pyle in-ear monitor and receiver system offers tabletop stage monitoring with a wireless range of up to 330 feet. This kit includes an audio system transmitter, digital belt-pack receiver, and in-ear headphones perfect for you
• STAGE OR STUDIO USE - Featuring UHF wide audio signal transmission w/ a Professional quality item system operates perfectly in both a studio and stage environment. Provides good sounds performance free from distortion
• NO COMPLEX CONTROLS - Pyle's in-ear monitor system has simple controls for hassle-free operation, plus selectable audio frequency to optimize your sound. In-ear monitor allows for the volume to be set at a safe level, also block out excess stage noise
• FREEDOM OF MOVEMENT - Wireless in-ear monitor allows for uncluttered stage sets & a reliably consistent sound wherever you move. Ideal for use by singers and musicians, this in-ear monitor system for bands & singers features an adjustable TNC antenna
• THE EXPERT TECHNOLOGY GUARANTEED - This also upgrades the sounds quality of your stage and studio productions with the best in-ear monitors available. Enjoy the latest in-ear monitor and receiver system technology, with heightened sound performance

User questions & answers

Question:

Who do we contact for any warrenty on this product pyle pdwmn

Answer:

I've used it to tune my kalimba (african thumb piano) that instrument is like a small wooden box with a hole in it and I can barely manage to pinch it onto the soundhole. It works on anything you can clip it to for reading the vibration (unplugged electric guitars, etc.) Only issue I've had on my big acoustic is it doesn't always read the low E string so I hit the octave by touching fret 12 lightly

Product description

The P3TRA215CL is part of the PSM 300 wireless systems family. PSMÂ300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts. Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode technology or stereo mode to create a personal mix from two channels of audio. Includes P3RA, P3T, SE215, rackmount and hardware kits, ¼ wave antenna, BNC bulkhead adapter, BNC cable, power supply, battery adapter kit, 2 AA batteries, zipper bag, and user guide.

• 24-Bit digital audio provides clear, detailed sound
• Up to 90 dB signal-to-noise ratio
• Exceptionally wide stereo separation
• Solid analog RF connection over a 300 ft (90 m) range
• Half-rack, single-channel transmitter includes rackmount kit