Product description

Designed for professional recording, the Marantz Professional Phantom Pack provides two independent channels of 48VDC phantom power with two XLR connections in and two XLR connections out.

It’s the perfect kit when you’re on the road and need to power your condenser microphones.

Technical Specifications

• Voltage Output: 48 V DC (+ 2 V)
• Current Output: 6.5 mA x 2 (maximum, short circuit)
• Signal Separation: > 98 dB
• Undulatory Voltage: < 0.15 mV
• Power
  
  
  • Connection: IEC
  • Input Voltage: 100–240 V AC, 50/60 Hz
  • Consumption: 2.5W
• Dimensions (width x depth x height): 6.3” x 5.1” x 2.2”
• Weight: 3.0 lbs

Box Contents

• Phantom Pack
• User Guide
• Power Cable
• Safety & Warranty Manual

• 2-channel 48V phantom power supply for condenser microphones
• Output with low ripple and background noise output
• Rugged metal housing to go on the road
• Portable 3.1 pounds, 6.3" x 5.1" 2.2"
• Universal AC operating voltage (100 - 250VAC, 50 - 60Hz)

Product description

Features: Rockville PSP5 Universal 48V Phantom Power Supply for Condenser Microphones. Supplies 48V of phantom power for condenser microphones. Ultra-Low Noise. High Quality Audio Performance With Full Frequency Response. DC 12V Adapter Included. 1 XLR Input and 1 XLR Output (Balanced). Easy to Connect to Microphones and Mixers. Strong Aluminum Housing. Product Dimensions: 3.9"" x 3.5"" x 1.6 inches. Product Weight: 0.88 Lbs.

• Rockville PSP5 Universal 48V Phantom Power Supply for Condenser Microphones. Supplies 48V of phantom power for condenser microphones.
• Ultra-Low Noise. High Quality Audio Performance With Full Frequency Response. DC 12V Adapter Included.
• 1 XLR Input and 1 XLR Output (Balanced). Easy to Connect to Microphones and Mixers.
• Strong Aluminum Housing. Product Dimensions: 3.9"" x 3.5"" x 1.6 inches. Product Weight: 0.88 Lbs.

User questions & answers

Question:	what is in the box. Is there a power adapter to connect it to the wall power receptacle
Answer:	Yes
Question:	Does this work with usb condenser mic? Really new to this
Answer:	I have used a mic/headphone splitter with this mic, and it works fine.

Product features

ART Phantom1 48V Phantom Power Supply For Condenser Microphones

Different condenser microphones specify different amounts of required phantom power. As a rule, these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be more is better.

ARTcessories

ARTcessories are taking the audio world by storm and quickly becoming a popular brand with musicians, DJs and studio engineers everywhere around the World. Split, combine, mix, power. .. you name it. On stage, in the studio, in your living room, they’re easy to use and are built to last. For those times when you need a little box to fix a big need or to make more out of a smaller project, ARTcessories has you covered. You’ll discover a robust line of useful tools which include a complete range of direct boxes, headphone amps, small mixers, mic cable combiner/splitters and much more. ARTcessories are designed to deliver affordable solutions for a multitude of audio needs for any size project.

Rockville PSP5 Universal 48V Phantom Power Supply Box For Condenser Microphones

Features:

• Rockville PSP5 Universal 48V Phantom Power Supply for Condenser Microphones
• Supplies 48V of phantom power for condenser microphones
• Ultra-Low Noise
• High Quality Audio Performance With Full Frequency Response
• DC 12V Adapter Included
• 1 XLR Input and 1 XLR Output (Balanced)
• Easy to Connect to Microphones and Mixers
• Strong Aluminum Housing
• Product Dimensions: 3.9" x 3.5" x 1.6 inches
• Product Weight: 0.88 Lbs.

Product description

PylePro Model : PS430

48V Phantom Power Supply

Compact 1-Channel 48V Phantom Power Supply

Features:

• DC 12-Volt Adapter Included
• Ultra Low-Noise Audio Performance
• Selectable +12 / +48 V Power Supply
• On/off Power Switch and LED Indicator
• Quality Components and Rugged Construction
• Provides 48V DC Phantom Power Supply for Any Condenser Microphone

The Pyle Pro PS430 48VPhantom Power Supply delivers reliable 48V phantom power for condenser microphones in a compact, durable, all-metal housing. Enjoy ultra low-noise audio performance from selectable +12 / +48 Volts. High-quality components and rugged construction will ensure this power supply with stand up to the test and perform on all occassions. Comes with DC 12-Volt adapter and LED power indicator.

• 48V PHANTOM POWER: The Pyle Phantom Power Supply provides reliable 48V phantom power for any condenser microphones and transfer sound signal to sound card in a compact, durable, plastic housing
• SINGLE CHANNEL: Features a 1-channel unit w/ balanced mic inputs and outputs to connect in-line with your mic and mixer. With high-quality components and rugged construction, this power supply will stand up to the test and perform on all occasions
• INCLUDES 12V DC ADAPTER: The package includes DC 12 volt adapter for your convenience. Complete and ready to be used straight out of the box
• SELECTABLE POWER SUPPLY: The compact mini microphone amplifier lets you enjoy ultra low-noise audio performance from its selectable +12 / +48 volts power supply
• PLUG-IN OPERATION: Features on and off power switch and LED indicator for ease of operation. The simple plug-in operation provides a constant source of power to your audio equipment. Simple to use and ideal for stage and studio applications

User questions & answers

Question:	How do I connect it to a computer
Answer:	Yes. Since the amp will not provide phantom power to a microphone, you can connect the mic to this and this to the amp.
Question:	How do you connect it
Answer:	This yes I brought both at2030 and this trash phantom power supply...it lasted me 5 hours then started giving me a buzzing noise. Don’t recommend.
Question:	I have tried to hook up this contraption to my Karaoke machine, but to no avail..I have cords but nothing. Why
Answer:	Do not buy -- absolute garbage.
Question:	do this work wit lexicon alpha
Answer:	Yes, they should. I have used them with some A-T pro 45 mic's. I am not familiar with the boundary mic's, but power should be the same. They worked fine for me. I upgraded to a mixer that had phantom power and no longer needed them. Make sure you don't already have a phantom source available.

Product description

The SB-48 utilizes a non-radiating charge pump circuit to create a stable, ripple-free 48 volt supply for active direct boxes and condenser microphones. It is powered by a single 15VDC 400 mA supply (included), with XLR inputs and outputs for each channel. Simply connect your microphones or direct boxes to the XLR inputs, and feed the outputs to a set of preamps or a PA system. This allows you to use your favorite powered microphone or active DI on stage, even when the venue doesn t have a reliable phantom power source.Provide phantom power for condenser mic s48V or 12V power for specialty microphonesDual XLR inputs and outputsPowered via external 15V power supplyRadial Item No. R800 0149 00Get yours today; with the security of our many decades of experience and Sam Ash Music's efficient order processing, your satisfaction is guaranteed! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

• Provide phantom power for condenser mic’s
• 48V or 12V power for specialty microphones
• Dual XLR inputs and outputs
• Powered via external 15V power supply
• Power where you need it

User questions & answers

Question:	Can I use this to plug a condenser mic into a keyboard for vocoder
Answer:	This is just a power supply for condenser mics. You plug your mic into this thing, then plug this thing into your mix board. If you want to connect the mic to your computer, you'll need a sound card. You'll also need some sort of adapter to convert this thing's XLR output to whatever your sound card takes. This really isn't a product for connecting a mic to a computer.
Question:	Will this phantom power device power a FP-33 stereo mixer with this
Answer:	It comes with the power cable to plug it into the wall outlet. It’s not wireless.
Question:	Will this phantom power device power a microphone for at least one hour on a 9 volt battery
Answer:	You need a cable that converts the xlr output to usb input. Otherwise it works perfectly for computer input.

Product features

PRODUCT SPECS:

• Unit Size: 3.75” x 3” x 1”
• Power Cable Length: 5’6”
• Input Connector: XLR
• Output Connector: XLR
• Supply Adapter: 48V DC

Product description

The M48 48V phantom power supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48V of power for the best sound and noise performance. Powered by either a 9V battery or supplied AC adapter.

• XLR input and output
• Transparent, noise-free operation
• Powered by the included AC adapter or 9V battery
• Power and low battery indication
• Built-like-a-tank construction

User questions & answers

Question:	Why are the only reviews on this product a "Vine Customer" ? Seems a bit set up
Answer:	The Algo 8186 is the SIP Paging Speaker and IP Loud Ringer that requires PoE as detailed in the product bullets and desciption. It does NOT include a PoE switch or PoE injector (midspan) so you will need that capability to support this VoIP device. Check the product description for more information and any recommendations or requirements. If you are unsure of how to connect the Algo 8186, please contact your Algo dealer.
Question:	With phantom power on, how long does it last
Answer:	25mm back-electret, brass-looking, you can see them on Amazon Prime: VOXDIDA 1PC CM012 . Normally you would have a narrow front cardioid lobe and a weaker narrow rear lobe sensitivity, but if you block the rear of a cardioid you get an OMNI out of it. This mike will block "some" of the typical rear lobe, with it's rear PCB assy. Probably pretty good for a studio, and OK for stage if your PA is not aiming right at it, but do not expect feedback miracles.
Question:	Is there an option for attaching shoe mount
Answer:	It fits the generic mic stand screw. Any stand you pick up from guitar center or your local music should fit it. (I’m pretty sure 5/8th is the standard but can’t recall)
Question:	My at2020 isn't getting enough quiet gain on my dbx 286. can i use this inbetween my dbx to get an added quiet gain boost
Answer:	A Uni can still hear off the back, however, this unit does have the PCB right behind the rear capsule-vents internally, which will force it to have a wider front pattern.

Product features

Mackie M48 Phantom Power Supply

The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance. Powered by either a 9v battery or supplied AC adapter.

Product description

Phantom Power Adapter for Evolution Wireless

• For use with ME2 and ME4

User questions & answers

Question:	hello! I have 2 mics Sennheiser e908B-ew this is the adaptador that I need to use them directly in the console
Answer:	Hi, yes it does. If this was helpful, please consider buying from us. We can help after the sale as well. - Pixel Pro Audio
Question:	Does anyone have experience attaching a Sanken CO"S-11D (3.5mm locking Sennheiser) to this device to be able to use it wired, as well as wireless
Answer:	Info from the manual on their website, Specifications: * The Phantom II provides Phantom Power for one or two condenser mics. * A three-way 12V/OFF/48V selector switch lets you choose 48V for mics rated at24 to 48V, 12V for lower-voltage mics or OFF to conserve battery life. * Power can be supplied by two 9V batteries (included) or an optional AC adapter (also included). * The power LED goes out when the unit is running on batteries and switched OFF, but remains on while an AC adapter is in use. * Low-noise operation is featured in all modes * Input Connectors: 2 x XLR female * Output connectors: 2 x XLR male * Required batteries: 2 x 9V * Optional AC adapter: 12V DC
Question:	I am trying to use a sennheiser me-2 with a zoom h4n recorder. do i need this adapter to connect or there is a cheaper option
Answer:	Yes
Question:	does this have a 1/4" out
Answer:	No this is for xlr mic
Question:	I am new to phantom power. Does this model (and most other models) have to be plugged in to a power source to work
Answer:	Yes it does, but they are of very poor quality.
Question:	Does the 9v battery go inside the back compartment
Answer:	No!! But You can adjust the BPM speed on any Sound effects on the mixer so is basically its the same thing..Not a Bad Dj Mixer For The Price!!
Question:	I need the power supply. I don't see it on this page
Answer:	No the mixer has alll the outputs for easy connection.ThanksRaifordVinylespresso

Product description

Upgrade Your 3.5mm Microphones The D-XLR can convert 12-48V Phantom Power down to 3V 'Plug in Power', which allows microphones with 3.5mm TRS connectors to run off Phantom Power. The D-XLR is specially designed for our V-Series of microphones to trigger their Smart 3.5mm TRRS outputs with bias power from a standard XLR input. Take Your On-Camera Microphone Off The Camera D-XLR enables the V-Mic D3 PRO to use on a boom pole, allowing the V-Mic D3 PRO to record clearer more professional audio like during an interview. At the same time, D-XLR has no adverse effect on microphones like the V-Mic D3 PRO in terms of signal-to-noise ratio, total harmonic distortion and sensitivity like another model on the market. D-XLR uses a 3.5mm TRS standard wired input that is gold-plated so that contacts on the plug make a better connection and does not loosen. The D-XLR was specially designed to fit in the groove in the Rycote pistol grip shock mount handle. The snug fit and rubber surface offer more than enough friction to hold it in place while swinging a boom pole

• Compatibility: Compatible Microphones:A.LavV.LavV-Mic D1 (Discontinued)V-Mic D2 (Discontinued)V-Mic D3V-Mic D3 Pro+Other 3.5 Standard TRS microphones
• Voltage: 12-48V Phantom
• Bias Voltage: 3V
• SNR: 80.9dB
• THD: 0

Product description

The PB23 is for powering Phantom powered microphones with 48VDC. Since the unit uses a 100kHz switching power supply there is no audio Noise generated. It has an output pull down resistors so it will work with any mixer.

• PB23 Phantom power adapter
• Powers A Single Microphone
• Utilizes A Switching Regulator For Stable Voltage Performance
• Item Package Weight: 1.0 Pounds

User questions & answers

Question:	Is an ac-dc adaptor included with the phantom power adaptor
Answer:	With the ME-2. I think this is your only option.If this was helpful, please consider purchasing from us. We can help with support after the sale as well. We have it in stock and ready to ship. - Pixel Pro Audio
Question:	Do you know if this works like a "cloud lift" where it gives extra db of clean signal to offset noisy preamps, or does this unit simply provide 48V
Answer:	No, XLR ins and outs only, you’ll need separate adapters if you want to go to 1/4”.
Question:	What is the dc power supply wattage/current rating. 12 v and ___ a
Answer:	It can be powered by an external power supply or by a 9-volt battery inserted in a compartment in the unit ... your choice. Both ways work fine.

User questions & answers

Question:	Hello, will this work for using a modmic 4 on a mixing console
Answer:	Yes, the Antlion Audio XLR Power Converter is the most efficient way to use a ModMic with a mixer, audio interface, or XLR device that outputs 48v phantom power. The converter decreases the operating voltage to a safe level for all 5V (3.5mm) microphones.
Question:	What is the configuration for the 3.5mm input? I don't see anywhere if it's trs or ts. This is an important detail
Answer:	One end of the Antlion Audio XLR Power Converter is a 3.5mm TRS jack.
Question:	Is this adapter good for most Electret mics
Answer:	The Antlion Audio XLR Power Converter works on other plugin-power 5v mics only.
Question:	Will this work with a 3.5mm trs stereo mic like the sony ecm-cs3, or will it just get no sound
Answer:	The Antlion Audio XLR Power Converter works only on ModMics and other plugin-power 5v mics. You'll still need to connect your Sony mic + Antlion Audio XLR Power Converter to a 48V, 3-Pin, XLR power source like a mixer or audio interface.

Product features

Antlion Audio XLR Power Converter

The Antlion XLR Power Converter is the most efficient way to use a 3.5mm microphone with a mixer, audio interface, or other 48V, 3-pin, XLR power source. The converter decreases the operating voltage to a safe level for all 5V, 3.5mm microphones. Our built-in proximity compensator recognizes the way voices change as a microphone nears the source and adjusts the signal accordingly, delivering the most natural sounding voice regardless of proximity. An ideal choice for streaming and casting.

Reduces Input Power

Converts phantom power to plug-in power, decreasing the voltage from 12-48V phantom power to 3-5V plug-in power. Great addition between your unbalanced mic and your balanced interfaces.

Built-In Proximity Compensator

A built-in proximity compensator reduces any extra bass that occurs when your mic is too close to your mouth. Bass-reduction also minimizes the loud sound of ‘p’s and ‘b’s (‘plosives). Overall sound is delivered with more natural vocals when using boom microphones.

Hi-Fi Audio

Antlion XLR Power Converter shields audio signals from interference and enhances the sound by minimizing the power and bass output. Clear XLR quality, high-fidelity audio.

Universal Compatibility

The XLR Power Converter works with all 48 volt 3-pin XLR interfaces. Connect to field recorders, XLR cameras, mixers, audio consoles, amps, preamps, and more.

Product description

Power module for AT892 microset. Also suitable for use with any Audio-Technica wireless essentials microphone terminated with 4-pin locking connector. The AT8539 allows you to convert your wireless microphone into a wired model. Comes equipped with a Snap-On belt clip.

• Power module for AT892 microset. Also suitable for use with any Audio-Technica wireless essentials microphone terminated with 4-pin locking connector. The AT8539 allows you to convert your wireless microphone into a wired model. Comes equipped with a Snap-On belt clip

User questions & answers

Question:	Is there an alternative adapter that does not supply power and is cheaper? my interface supplies the power so i need an at 4pin to xlr adapter
Answer:	Yes, as long as you can send phantom power from your console.
Question:	Do you have the power module of a atm
Answer:	We mainly use this for attaching the Sanken COS-11D 3.5mm locking Sennheiser and it works great.