12 best adj products audio mixers

Product description

The American Audio VMS5 is one of the most comprehensive DJ Controller ever designed for performance minded DJs looking for a solid, all-in-one Midi Controller to control their software and music from their laptop (4 Deck and 2 Deck DVS!), plus have option to use the stand alone mixer as a tradition analog mixer with 4 line inputs, 2 Phono inputs and 2 Microphone inputs. In addition, some general features include 4 USB / Analog selectable Midleg (Midi & Analog) channels, gain/treble/mid/bass EQ on all MIDILOG channels.

• The lasted VMS Midi Controller from American Audio - the VMS5 is 6 channel stand alone Midi Controller with 2 Phono, 4 Line, 4 USB, 2 Microphone inputs
• Midi Controller with 4 USB / Analog selectable MIDILOG (Midi & Analog) channels Master and Booth outputs with L/R balance Balanced Master outputs 12 position stereo master output VU meter
• On/Off soft startup and turnoff Gain/treble/mid/bass EQ on all MIDILOG channels 2 phono/line selectable analog channels
• Two microphone channels with illuminated on/off switches and gain/treble/mid/bass EQs On/off cueing on each MIDILOG channel Split cueing headphones with rotary mix control
• Illuminated rubber knobs for ease of use in dark environments Full analog mixer operation if the computer crashes or with external power supply Crossfader curve control Crossfader assign and reverse
• This is an aftermarket of generic part

User questions & answers

Question:	What are the usb inputs used for
Answer:	analog is for turntables, cd player and any other inputs . USB plugs into your computer for whatever program you are using, (virtual DJ, Serato DJ, TRAKTOR Pro) This is a very good MIDI for the money,
Question:	does it work with djay pro
Answer:	I do not know, but it does work with VDJ and MegaSeg.
Question:	Can anyone suggest a replacement cross fader (innofaders are expensive). my unit arreived with a defective crossfader and adj is very unresponsive
Answer:	I fortunately innofaders are your best bet.
Question:	does it work with tracktor Pro software
Answer:	Yes

Product features

VMS5

The American Audio VMS5 is one of the most comprehensive DJ Controller ever designed for performance minded DJs looking for a solid, all-in-one Midi Controller to control their software and music from their laptop (4 Deck and 2 Deck DVS!), plus have option to use the stand alone mixer as a tradition analog mixer with 4 line inputs, 2 Phono inputs and 2 Microphone inputs. In addition, some general features include 4 USB / Analog selectable Midilog (Midi & Analog) channels, gain/treble/mid/bass EQ on all MIDILOG channels.

Pro Features include: The Inno-fader compatibility (the VMS Series was the first controls to offer this) with curve control and assign and reverse, XLR master output with Balance & Booth output. DSP D-Core inside with studio quality audio engineerinp + pro stage microphone circuitry. It has 34 assignable rotary controllers, 4 assignable rotary encoders, 50 MIDI buttons with LED illuminations, including 18 with dual blue/red LEDs.

6 Channel Stand Alone Mixer with Full Midi Capability

2 Phono, 4 Line, 4 USB, 2 Microphone Inputs

Dual 2000 Point Resolution Touch Sensitive Turntable Scratch Controls,62 Assignable Midi Buttons and Switches

Virtual DJ 8 Le Included with New Software Features

Product description

The ELS Go is a battery-powered and portable speaker system that can be taken anywhere you need extremely high-efficient sound. With built-in wheels and a pull-up handle, this durable, rugged speaker is ready to transport and store anywhere. Professionally designed, the ELS Go features a built-in Mixer with XLR Mic input, RCA Line inputs, and 5 Band Graphic Equalizer. The ELS Go is the perfect sound solution for a beach ceremony setup, performance in the park, or pop-up events where power is not readily available.

• TRANSPORTABLE SPEAKER SYSTEM: Perfect for venues where power may not be readily available, the ELS Go 15-inch speaker is easy to take and setup anywhere and is built with a high powered rechargeable battery.
• VERSATILE APPLICATIONS: With built-in USB port, Bluetooth, Mixer with XLR Mic Input and RCA Line inputs, you can transform this powerful speaker into a transportable karaoke, stage microphone, or music player.
• LIGHTWEIGHT PROFESSIONAL DESIGN: Designed with a durable, rugged exterior, the ELS Go is built to last and transport is easy with a built-in handle and wheels.
• RECHARGEABLE BATTERY INCLUDED: The ELS Go is powered by a 10 amp rechargeable battery which holds its power up to 8 hours. Easily recharge with a built-in charger port that connects to an external charger.
• PRODUCT SPECIFICATIONS: Wireless Audio connectivity, Built in Mixer with XLR Mic input, RCA Line inputs, Master Volume, Channel Volumes and 5 Band Graphic EQ, 45 lbs., 19 x 18.2 x 32 inches .

User questions & answers

Question:	Is there a speaker tripod hole in the bottom
Answer:	Hello, Please don’t worry it influence the thermal dissipate issue, this is mature material and product. Thanks. Have a nice day Aggie Dgjrc service
Question:	How many watts
Answer:	Dear Customer, This is not fit for Surface Pro 3. Please kindly noted. Thanks. Have a nice day DG-JRC Serivce
Question:	Can you hook up more than 1 mic
Answer:	There is one set in 2 halves. This cover is only for the back side.
Question:	Can you use a wierless mick microphon with it
Answer:	Nope.

Product description

The all metal DB DISPLAY MKII decibel display from American Audio is for monitoring your sound volume. It also creates a great light show in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system. The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer.

• Designed to set in an amp rack to view your decibel level and Creates a great light show in your amp rack
• Display progresses from green through amber to red and Sensitivity adjustment on both left and right channels
• 2 separate modes: dot and bar and Includes 5V power supply
• Line Inputs: Left & Right RCA / Left & Right XLR and Line Outputs: Left & Right RCA / Left & Right XLR
• Voltage Operation: DC 5V, 500mA Power Supply included and Dimensions: (LxWxH): 19” x 1.75” x 1.75” / 44.5mm x 483mm x 44.5mm

User questions & answers

Question:	I want to use on a dedicated subwoofer amp. What is the frequency response of this unit
Answer:	Frequency response does not matter. This unit is a meter that measures signal strength/level - which is apples and oranges to frequency response. It will work fine with your subwoofer but don't hook it up to the power outputs from the amp - hook it up to the signal going into the power amp.
Question:	Can you hook xlr to rca(for the stereo receiver)? True probably go just rca ro rca but that wont be as much fun
Answer:	Yes, XLR is positive, negative and shield. Depending on signal direction. If xlr to rca shield would only connect at xlr. If rca to xlr shield would be connected to rca negative post. When shield is connected to sorce connector only it creates a shield to block interference along the cable.
Question:	So which 5v power supply is included? (usa
Answer:	Standard . 5v to 120v
Question:	Can this be used with a bass amp
Answer:	Be warned... it is NOT accurate (flat) with regard to bass frequencies. It works down to around 50 Hz, but at 30 Hz response is down and at 20 Hz it's WAY down. Something to be aware of.

Product features

DB Display MKII

The all metal DB Display MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightshow in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system.

The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer.

Product description

The American Audio, MEDIA OPERATOR BT is a fast, simple and reliable all-in-one MP3/wireless audio media player Designed for permanent installations where easy control of music is a must.

• Sd card*/ USB 2.0/wireless audio full functioning MP3 player track time display track search buttons
• Easy-to-use bright LCD display reads SD/SDHC cards up to 32GB
• Up to 1000 MP3 songs on a 1G SD card** (MP3 recorded at 128bit rate**) 4x RCA line inputs and 1x 35mm Auxiliary jack input 1x RCA, 1x l/R unbalanced 1/4" Jack, 1x l/R balanced XLR outputs
• Memory card*/ USB 2.0/ wireless audio full functioning MP3 player track time display track search buttons
• Bright LCD display reads standard or high capacity memory cards up to 32GB up to 1000 MP3 songs on a 1G memory card** (MP3 recorded at 128bit rate**)
• Master music output volume control individual EQ Treble/ EQ Bass control for music combo mic input: 1/4” jack and XLR master mic output volume control

User questions & answers

Question:	Can i connect (via rca jacks) a bluetooth speakers to this or will it "fry" the speaker? thanks
Answer:	only via an external mixer. You can buy a small mixer, lik this one: https://www.google.com/search?safe=active&tbm=isch&sa=1&ei=jW4nWvT5KYOZjwSPwaMI&q=mic+xlr+micro+mixer&oq=mic+xlr+micro+mixer&gs_l=psy-ab.3...136027.136766.0.137029.4.4.0.0.0.0.130.473.0j4.4.0....0...1c.1.64.psy-ab..0.0.0....0.Hvi5PBciLtM#imgrc=RGUQmrw97DoF-M:
Question:	Does it come with a remote controller
Answer:	You'll still need a pre-amp for a mike. I use a Shure wireless system, but I run it through a mixer.
Question:	How do you keep your Bluetooth connection secure? Online manual is rather sparse on information or instructions
Answer:	No. It comes of clean/

Product description

From ADJ the ELS-15BT Multi Function 15 inch speaker features both Wireless connectivity and also a built in mp3 player. Use the Wireless Audio from your mobile device as your DJ platform with the use of running connector cables. Separate high frequency and low frequency provide the power to the speaker as you music demands it, flyable & stand mountable, treble, bass and volume output control, microphone, and line level controls with master volume.

• 2-WAY ACTIVE: Bi-amplified lightweight speaker with built-in Wireless Audio and MP3 player that offers USB & Memory Card input slots.
• 4-WAY PROTECTION SYSTEM: American Audio’s ELS-15BT, Wireless Multi-Functional Speaker harbors short circuit protection; thermal protection; On/off mute & LF/HF limiters.
• REMOTE CONTROLLED: Comes with 21-Input remote control (p/n ADJ AUD RC). Perfect for channel change, volume control, and play/pause control.
• MULTI-FREQUENCY POWER: Separate high and low frequency provides power to the speaker as you music demands it.
• XLR INPUTS/OUTPUTS: XLR & TRS MIC inputs, XLR & RCA line inputs, and XLR & TRS line outputs.

User questions & answers

Question:	hello- is only one speaker needed? does it play the l/r (stereo) channels through one speaker
Answer:	There is no remote controller included, or even available for this unit.
Question:	I bought a ELS-15BT 2-way Speaker and hooked it up with another speaker, no sound from 2nd speaker, also from a Bluetooth laptop music was breaking up
Answer:	If you're "bluetooth-ing" from smartphone? switch to AIRPLANE MODE. If you are in an environment with a lot of electronic senders and receivers such as an airport, hotel, a home with wifi and people watch downloaded movies ; i.e. lots of electronic wireless traffic, including wireless subwoofers, and sleeping smartphones which still have to receive emails, alerts, and apps that monitor location + nearest cell tower,,,,,,!? Then you will have to put your phone in airplane mode , then turn on "bluetooth only", then keep your phone or blutooth transmitting device as close as possible to the adj media operator BT. Other than that, I would like to know the less obvious as well because all bluetooth sending and receiving devices seem a tad bit glitch you, especially when using the equalizer and other parameter effects like stereo enhancers etc. That's when mine glitches , can't wait to get the bugs worked out. But still, I rather use this than to have a 20ft cable roped all over the floor with the unfortunate possibility of the 1/8" jack or 3.5mm jack come loose and my speakers pop or fry the voice coils because of non linear movement of the cone + over excursion/ speaker blow out.
Question:	DOES THIS SYSTEM COME WITH A MICROPHONE
Answer:	YES IS THE HOLE FOR THE STAND
Question:	Whats the power rating forthis device
Answer:	100 RMS and 250 Peak

Product description

This DMX Splitter/Amplifier allows for the easy connection to lighting units and the transmission of signals to them. Lightweight and easy to mount, functions perfectly as a transmission hub for any permanent setup or mobile entertainment system.

• DMX In And Outs Are Electrically And Optically Isolated From Each Other, No Cross Talk
• Includes 2 Fastening Straps to Attach to Truss
• Easy To Install And Use

User questions & answers

Question:	Is this battery operated... or does it plug into an outlet? ...as I don't see a place for power to plug in
Answer:	This is NOT an amplifier or a receiver and as such there aren't any speaker out connections.It is strictly a player to be connected to a integrated amplifier or receiver. Your speaker connections are made to those units not this product.

Product description

Accu Cable DMX Stage and Set cables will allow you to connect Par Can, Movable Head Fixtures, Lasers, and other lighting affect essentials all to your DMX Control Board or DMX GO device. Professional and durable construction create a cord that is safe and reliable. Design a memorable, state-of-the-art lighting effect show at your next event with ADJ Products and Accu Cable. Perfect for novice or expert set designs and stage lighting applications.

• SHIELDED TO PREVENT INTERFERENCE: Accu Cable DMX Cables feature state of the art construction with Duofoil and Copper Braided Shielding to protect wires and prevent signal interference between controls.
• HIGH QUALITY PROFESSIONAL CONSTRUCTION: Constructed by the leaders in stage and set features with the highest quality copper wiring, anti-pull cotton cording and lined with durable PVC for long-lasting use.
• SUITABLE FOR VARIOUS APPLICATIONS: Accu Cable DMX Cables with 5-pin male to female Connector flawlessly connects most lighting fixtures for a one-of-a-kind light show controlled in DMX or Master/Slave modes.
• CUSTOMIZABLE SPOOL: With 300 feet of powerful and professional-grade DMX cable, you can fit your cord to your lighting plan rather than the other way around. Use with 5-pin connectors to finish cut ends.
• ESSENTIAL FOR SET DESIGN: Take your club, mobile DJ service, wedding, church, concert or conference to the next level with state-of-the-art stage and set designs using Accu Cable and ADJ Products devices and connections.

User questions & answers

Question:	Is this cable rated for outdoor use
Answer:	The max I tested was about 600 whit no distortion at all, sounds nice, very good high frcuency

Product description

The VMS4 Flip Case from ADJ Products is designed to protect your highly valuable America Audio VMS4, VMS4.1 and VMS2 Models. With heavy duty construction and an aluminum profile this is the on the road case you need to have. It has a removable lid with a flip up tray for you to put your laptop on during your performance. Make sure to show up in style, and with all of your equipment contained safely with this stylish VMS4 Flip Case from ADJ.

• TOP QUALITY PROTECTION: Heavy duty construction and aluminum profile combine to create the VMS4 Flip Case designed to protect your valuable DJ DMX Controllers when traveling and packing from show to show.
• PROFESSIONALLY DESIGNED DETAILS: Created with a removable lid and clip tray so that you can easily set your laptop on top during shows. Front and back trays allow you to access knobs and cables quickly and conveniently.
• MAKE AN IMPRESSION: Show up to your show knowing your gear is always protected. Metal ball corners and heavy duty aluminum and black casing give the VMS4 a sleek, stylish design that creates a professional impression.
• SPACIOUS AND PORTABLE: Designed for ease of portability and professional setup. Store your cables, secure the butterfly lock for quick load up. Designed with a built in handle to easily carry it anywhere.
• PRODUCT SPECIFICATIONS: Outside dimensions 21.5"x18.25"x8" / 545x460x200mm, inside dimensions 19"x12.5"x2.5" / 480x315x60mm, 23 lbs. / 10.5 kg. Designed to fit ADJ VMS4, VMS4.1, and VMS2.

User questions & answers

Question:	Well it fit a ddj-sb
Answer:	This is not battery operated..the power cord is attached (not pictured). Hope it helps.
Question:	hi will this fit american audio encore
Answer:	This is only one speaker with Bluetooth capabilities. It does play stereo, if you have the proper cable (TRS) if you are planning on going wired. If you are going via Bluetooth, it will play stereo automatically.
Question:	Will fit a pioneer dj ddj-rb
Answer:	Yes the music breaks up when connected to my iphone or labtop even if next to speaker.
Question:	Will a numark mixtrack fit
Answer:	No, doesn't come with microphone. but comes with 1/4 input or 3 ways. I highly recommended buy the sampson microphones set 3 for $50 dls.

Product description

ADJ's DMX Operator controls up to 192 DMX channels; 12 fixtures each with 16 DMX channels. Fixtures with less than 16 channels can be combined on one fixture button to optimize channel space. It is MIDI controllable and has a built-in microphone to quickly control a small stage set up. It records up to 6 programmable chases with fade times and different speeds and offers 8 individual faders provide easy programmability for intelligent lighting or dimmer packs. For simple ease of lighting control, the DMX Operator is a versatile solution for traveling DJs or Small Stage Designer.

• SIMPLE EASE OF CONTROL: Operate conventional and moving lights across 192 DMX channels. The DMX Operator puts programming, playback and live manipulation of Scenes and Chases at your fingertips.
• PROGRAMMABLE SCENES AND CHASES: Easily record up to six chase pattern sequences that can each be individually adjusted during playback using the fade and step speed operations.
• CONTROL INTELLIGENT OR BASIC LIGHTING: Fixtures with less than 16 DMX channels may be combined on 1 Channel Fader Record up to 6 programmable chases with fade times and different speeds.
• OPERATES UP TO 12 FIXTURES: The Operator combines professional capabilities with simple easy to use design to offer DMX control of up to twelve individual fixtures each with 16 DMX channels.
• PRODUCT SPECIFICATIONS: MIDI controllable, DMX-512, 3 pin XLR signal, Power input: DC 9V-12V, 220 mA min. power supply included, 120V or 220V operation (not multi-voltage), Dimensions: 5.25" L x 19" W x 2.5" H - 19 in. / 3 r.m. spaces, 5 lbs.

User questions & answers

Question:	can this work with any moving head
Answer:	This case only fits the Vms4 And Vms4.1
Question:	Can I attach this to a mixer rack
Answer:	Yes!
Question:	Can this dmx controller remember settings in memory if not plugged in for 30, 60 or 90 days? Thanks
Answer:	No the numark is actually bigger than the case
Question:	Is this controller compatible, or will control, hex-color lights
Answer:	No

Product features

DMX Operator

ADJ's DMX Operator controls up to 192 DMX channels. With it, you can record up to 6 chases which you can then playback with separate fade and step speeds. The 8 individual faders provide easy controlability for any DMX 512 intelligent fixture.

Product description

The Hexcon is a 36-channel DMX controller that controls up to 6, RGBAW+UV, LED fixtures or fixture groups. It features a control panel includes 24 direct access pre-programmed color macro buttons, 6 user programmable color preset buttons, 6 multi-function channel faders which are used to control individual color intensity, Chase program “Speed”, Chase program “Fade”, Master Dimmer and Strobe speed. The HEXCON is one of the simplest and most versatile LED controllers available today.

• 6-CHANNEL DMX CONTROLLER: Control up to 6 indicidual RGBWA + UV LED fixtures or fixture groups. Designed to control the ADJ Hex Series Lights but will operate and 6-channel DMX fixture.
• EASY TO USE FUNCTIONS: With 6 user programmable preset buttons, 24 color presets, 9 preset functions, and on the fly speed and fade control you can easily design a professional level show.
• MULTI MODE OPERATIONAL: Operate in several different modes to suit your needs. Features control in Color Fade Mode, Color Chase Mode, Auto Run, Sound Active Mode via external microphone, and Strobe functions
• BUILT IN USB PORT: Keep your phone or device charging close by, the Hexcon is designed with a built-in USB port to connect and charge most devices.
• PRODUCT SPECIFICATIONS: DMX output connector: 3-pin XLR, USB phone port, 12VDC 500mA UL approved power supply, Power consumption: 3.6 Watts, 14.2” x 5.25” x 2.5” (361 x 185 x 65mm, Weight: 4lbs. (1.74kgs.)

Product description

ADJ's PinPoint GO is a portable, easy-to-use 3W white LED pinspot. It features a rechargeable battery, frost filter, RGB color filters, a magnetic bracket and X-CLIP bracket to install on metal surfaces and drop ceiling frames. It's great for spotting tables and decor lighting. Specifications • Rechargeable battery powered, bright 3W Cool White LED Pinspot with 5-degree beam angle (15-degree with Frost Filter) • Compact high-tech plastic case design • Long-life LED: 50,000 hour LED life • Power consumption: 3W & 15W (When Battery Charging) • Includes magnetic bracket for easy quick install on metal • X-CLIP Bracket for drop ceiling frame mounting • Includes Frost Filter & Color Correction Filter • Includes Red, Blue, & Green Color Filters • Rechargeable battery included in fixture • Includes Power Adapter (DC 13V 1A) • ADJ LED RC3 Remote Control • Battery Charge Time: 4.5 Hours (With Power Switch Off) • Battery Life: 7.5 Hours (Full On) 11 Hours (In Energy Saving Mode w/ Full Charge)

• Rechargeable battery powered, bright 3W Cool White LED Pinspot with 5-degree beam angle (15-degree with Frost Filter)
• Compact high-tech plastic case design
• Long-life LED: 50,000 hour LED life
• Power consumption: 3W & 15W (When Battery Charging)
• Battery Life: 7.5 Hours (Full On) 11 Hours (In Energy Saving Mode w/ Full Charge)

User questions & answers

Question:	Is there a case available for this light if I purchased multiple lights
Answer:	If it is the same size as ddj-sb then it will fit

Product description

50', 16 GAUGE, 120VAC/XLR SIGN

• The package length of the product is 10.99999998878 inches
• The package width of the product is 10.99999998878 inches
• The package height of the product is 4.9999999949 inches
• The package weight of the product is 9.84999999173988 pounds