11 best amp monitors

Product description

The Rolls PM50s mixes a stereo or mono line-level Monitor signal with a mic level XLR microphone signal to a set of headphones or earphones. It has a monitor level control, mic level control, mic pass through XLR jacks, two headphone output jacks, and a stereo TRS 1/4" monitor input jack. Possible users may be drummers who need to hear a click track, choir singers who need to hear themselves, etc. The power adapter is included.

• XLR Mic In and Pass Thru
• Ground Lift on XLR Thru
• Mono or Stereo 1/4 inch Monitor Input
• 1/4 inch and 1/8 inch Phone Outputs
• Lots of output level, it's loud

User questions & answers

Question:	Does it include a power supply? Is the power supply the same as an individual guitar pedal? for example the flash back of TC
Answer:	In the measure of safety, use a P95 mask. But in my personal opinion, an open window/fan should be enough. If you mix large amounts (more than say a few cups) at a time, I would recommend a mask. I poured 3 gallons at once and the smell was a little much, but pouring 2-4 cups at a time I don't notice it much.
Question:	Can I go from a direct box with a 1/4 inch with bass? I go direct and use the bass amp as a monitor and am trying to keep stage volume down
Answer:	Yes
Question:	does this have to run through a monitor amp or can it come straight from the aux send
Answer:	It gives you 40 minutes of work time. It has to stay 50 50 or it turns out funny.
Question:	Does the 'MIC' volume pot change the pass thru signal out
Answer:	Pretty well anyplace on the net

Product description

KRK Classic 5 Powered Studio Monitors incorporate over 30 years of innovation From the world’s leading studio monitor manufacturer. Borrowing concepts from the rokit line—one of the most used studio monitor lines in the world, The Classic 5 defaults to a new flat frequency solution towards more critical listening—transpiring into more accurate mixes. With the optional +2dB KRK bass boost, the Classic 5 holds true to the sound that music creators around the world have loved for years. The Classic 5 monitors deliver a multitude of features geared to meet the demands of today's competitive producers and engineers including an innovative class A/B amplifier with a built-in automatic limiter, a 1” soft dome tweeter and 5” glass-Aramid composite woofer, a waveguide designed to ensure detailed Imaging in the listening position, a front-slotted bass port to reduce boundary coupling and allow flexible positioning in the room, and multiple input connections to ensure the Classic 5 will easily integrate into any system configuration. Taking cues from one of the most used studio monitors in the world, The KRK Classic 5 is a valuable compact solution towards accurate mixes and productions.

• High/Low-frequency controls contour your sound for environment, preference, and music style, and the custom bi-amped, class A/B amp offers large headroom and low distortion
• Soft-dome tweeter with optimized waveguide provides smooth, pristine and articulate highs up to 35kHz
• The low-resonance enclosure minimizes distortion and color, and the lightweight, glass-aramid composite woofer delivers clear midrange and tight bass
• Flat Low Frequency Adjustment adding versatility and improved accuracy for mixes that translate in different environments
• Superior low-end extension with optional setting of +2dB KRK Bass Boost acclaimed by music creators worldwide

User questions & answers

Question:	I have the ddj sb3, what cord should i use to connect them
Answer:	I’d use TRS or XLR cables. Looks like your equipment uses red and white aux cords
Question:	Does a female xlr cord go into this
Answer:	As the photo on the product page shows, you would plug the male end of an XLR cable into the monitor for balanced operation. The monitors follow the standard practice of having female XLR connectors as inputs, just as you would find on mixing boards and other studio equipment. Outputs generally have male XLR connectors. To accomodate this, standard XLR cables have a male connector on one end and a female one on the other. An unusual arrangement, should you ever encounter one, would require a non-standard cable or a gender-changing adapter.
Question:	Is this the G
Answer:	No
Question:	Is this the price for just ONE of these
Answer:	Yes. Just ONE. I thought it was for two, but no...just one.

Product features

Time-Tested

As an incredibly valuable tool for audio and music production, the KRK CLASSIC 5 powered studio monitors incorporate over 30 years of innovation from the world’s leading studio monitor manufacturer. Borrowing concepts from previous ROKIT lines—the most used studio monitors in the world, the CLASSIC 5 defaults to a new FLAT frequency solution towards more critical listening—transpiring into more accurate mixes. With the optional +2dB KRK Bass Boost, the CLASSIC 5 holds true to the sound that music creators around the world have loved for years.

Time-Trusted

Versatility is the name of the game with the Classic 5 studio monitors. Whether you’re recording music at home, or geared towards a professional recording studio setup, the KRK Classic 5s offer a multitude of features geared to meet the demands of today's competitive producers and engineers. Backed by a company obsessed with studio monitor performance, KRK Classic 5s hold true to the reason why you see so many yellow coned speakers, time and time again in recording environments all over the world.

Legendary Performance

For music creation, mixing and mastering, KRK Classic 5 professional studio monitors have been built for dependable and accurate performance. They feature an innovative Class A/B amplifier with a built-in automatic limiter, a 1” soft dome tweeter and 5” glass-Aramid composite woofer, a waveguide designed to ensure detailed imaging in the listening position, a front-slotted bass port to reduce boundary coupling and allow flexible positioning in the room, and multiple input connections to ensure the CLASSIC 5 will easily integrate into any system configuration. Taking cues from previous ROKIT Pro Monitors--the most used studio monitors in the world, the KRK CLASSIC 5 is a valuable compact solution towards accurate mixes, productions.

• 【Bluetooth】You can use your phone or I pad to play background music for your workout.
• 【Two speakers】6.5-inch woofer shows the bass better, 2-inch tweeter shows the treble well.
• 【Multipurpose amplifier】It can be connected to your electronic drum, keyboard or another instrument
• 【Portable design】Small size and light weight. It can running to a family practice, lesson or any situation.
• 【Easy to use】Three Knobs are easy to control. Indicator light make simple use.

User questions & answers

Question:	what cable do i need
Answer:	There are better choices for that -- you want speakers with a built-in mic preamp, and probably higher wattage amplifiers. You may also want folding speaker tripods. I suggest you puchase speakers designed for this, with a tripod screw hole on the bottom, and XLR mic inputs. For example, Bose EONS sound amazing for music as well. You may also wish to purchase a good wireless mic. Think of it as a system. The size of the room and the audience determine the required size and power of speakers.
Question:	Does the power cord fit into the American outlet
Answer:	son dos monitores, uno principal y el otro esclavo. Saludos.
Question:	Does it come with the cable needed to connect to electronic drums
Answer:	Take a piece of t-shirt and bring it back and forth between your face and the monitors.. you will hear that even something like a tshirt of pantyhose, has a considerable effect on the sound projection. Also, having grills on the speaker looks cheap imo..
Question:	The power cord plug seems not to be the American standard on the product photo, is it true or it does have the American version
Answer:	It comes with the speaker cable to connect the two speakers, a male 3.5 mm plug to male 3.5 mm plug, and a male 3.5mm plug to right and left RCA cable. We plugged a iPhone into them and played stereo music. Very Nice!

Product features

Perfect choice for traveling musicians

The Coolmusic DM20 Amplifier is perfect choice for traveling musician. Whether you’re running to a family practice, lesson or any situation that requires portability and versatility, the Coolmusic DM20 is in a Classic Portable Size and that’s ready to travel fast. Coolmusic DM20 Bring you a wonderful musical journey.

Bluetooth /USB

You could storage more songs in USB, avoid embarrass situation that your phone is low battery. You could also use your phone or iPad to play background music for your practice.

Feature

• LOW : This knob can adjust 'low frequency' of audio input by ' INPUT '
• HIGH :This knob can adjust 'high frequency' of audio input by ' INPUT '
• VOLUME : This knob is used to adjust the volume of power amplifier output

Can be connected to electronic keyboard, electronic drum

Optimized circuit chip design for the frequency characteristics of electronic organs, electronic organs and other percussion instruments, without distortion and better highlighting the percussive sound

Feature

• LOW : This knob can adjust 'low frequency' of audio input by ' INPUT '
• HIGH :This knob can adjust 'high frequency' of audio input by ' INPUT'
• VOLUME : This knob is used to adjust the volume of power amplifier output
• Function Indicator：Turn on the amplifier, the indicator light will turn yellow; turn on Bluetooth, the indicator light will flash blue and wait for connection

Product description

NETGEAR AC750 WiFi Range Extender (EX3700-100NAS). System Requirements:2.4 and/or 5GHz, 802.11 a/b/g/n/ac wireless router or gateway, Microsoft. Internet Explorer. 8.0, Firefox. 20, Safari. 5.1, Google Chrome 25.0 browsers or higher. Troubleshooting tip- If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender. Data throughput, signal range, and wireless coverage per sq. ft. may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Operating temperature: 32°to 104°F.

• Extended wireless coverage: Adds WiFi range coverage up to 1000 square feet, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more
• AC750 WIFI speed: Provides up to 750Mbps performance using dual band and patented FastLane technology
• Universal compatibility: works with any wireless router, gateway, or cable modem with wifi. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non standard or outdated
• Wired Ethernet port: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed
• Safe & secure: Supports WEP and WPA/WPA2 wireless security protocols
• Simple to setup: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location

User questions & answers

Question:	My family has two appartments next to each other, both separate electrical installations. Would this work if we wanted to split the internet bill
Answer:	Yes the EX8000 used as a wifi extender you have the option of having a guest network. You can use same SSID name as your main router or use a different SSID altogether. I did have issues with more than one extender on the same network using same SSID name as main router so I had to change one of the extenders to a different SSID.
Question:	Has anyone connected a ps4 of xbox one to the wifi from the range extender? if so, signal and game play any good
Answer:	If you mean an AT&T router signal, yes. If you mean cell tower signal, then no.
Question:	Does it create a new sid or does it exteneded your current sid, so one does not have to switch to differing networks when in range
Answer:	the input voltage is from 100 to 240 volts
Question:	I don't understand how some people give this 4-5 stars and others can't get it to work and give it 1 star
Answer:	there are 4 ports. I use multiple ones as this is the only system I can find that does not change the network name but once a year I also have one break and have to replace it or hard reset it myself.

Product features

Discrete Wall Plug Design

Plug into a wall outlet for a sleek solution that extends your router's range and stays out of sight.

Smart Connect up to 15 Devices

Intelligently selects between dual bands to minimize interference and maximize speed for your smart wireless devices.

5-Minute Setup

Connect to your existing router with one button press, connect devices to your network, and you’re done.

Connect a Wired Device, Too

One 10/100M Ethernet port lets you easily connect a nearby wired device for faster transfer and uninterrupted connection.

Universally Compatible

Works with any WiFi router for hassle-free reliability.

Product description

KRK RP5 Rokit 5 G4 Professional Bi-Amp 5" Powered Studio Monitor Pair, Black

• Professional grade 5“ (bi-amp) studio monitor designed and engineered in the USA
• 5” matching woofer and 1” tweeter made with Kevlar
• Built-in efficient Class D power amp
• Proprietary speaker drivers built in-house from the ground up
• Onboard LCD visual ds-driven EQ

User questions & answers

Question:	Are all needed cables provided
Answer:	No. IIRC, the audio cables are not included as you would need to select the specific cables needed based on what you are connecting to these fabulous monitors.
Question:	Can i use this for my focusrite scarlett solo (3rd gen and what cables do i need
Answer:	Yes, standard 1/4" to 1/4" unbalanced or balanced will work.
Question:	what is needed to run these form a PC
Answer:	An audio interface, and appropriate cables. For audio interfaces, explore Uaudio, Apogee, focusrite, etc. depending on what you buy, get the XLR/TRS cables. (2x).
Question:	Why is a pair priced higher than two single monitors
Answer:	It appears to be that the single monitor is directing towards the Amazon renewed store. So currently the single monitor is not being listed as new but is used and refurbished, hence the lower price.

Product features

KRK RP5G4 Pair

KRK's Rokit Generation 4 utilizes matching drivers made with Kevlar to ensure the same sonic integrity across all frequencies and minimizes listening fatigue. DSP-driven Room Tuning with 25 visual Graphic EQ settings helps minimize and correct problems in your acoustic environment. Works with the KRK App to set up your room for better monitoring and faster mixing. The custom-designed efficient Class D power amplifier drives the speakers evenly at reduced operating temperatures and improves audio integrity. The built-in Brick Wall Limiter automatically engages at maximum amp-level to maintain a balanced sound, protect the system, and offer better and wider dynamics. It features a low resonance enclosure for minimal distortion and colorization. A high density Iso-foam pad decouples the speaker from the surface to minimize vibration transmission for improved clarity.

Active Room Tuning

One of the best features of the Rokit G4 line of studio monitors is the option for DSP-driven Active Room Tuning. A first in its class, the Rokit G4 line offers an LCD graphic display for visualizing equalization settings, and Rokit G4 monitors come standard with 25 different onboard EQ settings to help minimize and correct problems in many acoustic environments.

The Rokit G4 line takes acoustic control one step further when you connect your monitor to the KRK app, available for both iOS and Android. With the app, you can accurately calibrate EQ settings to assist with proper speaker placement and level matching through use of the real-time Room Acoustic Analyzer. In just a few simple steps, you can determine the best settings for your monitor and really get the most out of your audio.

About KRK Systems

Known for accuracy and solid, innovative engineering, KRK studio monitors have been the choice of professional recording engineers and artists for over three decades. Many of the hits you hear-in a variety of musical genres-were mixed on KRK speakers. Your passion is music: Reproducing it with clarity and accuracy is ours.

Product description

Make Your Sound Your Own

You’ve worked hard to perfect your style. It’s yours and yours alone. You have your favorite sticks—just the right weight and length. You love playing those long triplet fills. No one is going to mistake your playing for someone else’s. Same thing with your sound—it has to be uniquely yours. Don’t trust your sound to an ordinary speaker. You need the Alesis Strike Amp 12 powered drumming speaker.



2000 Watts of Room-Shaking Power

With 2000 watts of explosive bi-amplified power and super high-performance transducers, this speaker will always play loud and clear, in any space, in any situation—whether you’re performing, recording or rehearsing. The heavy-duty 12-inch low frequency driver really adds the “kick” to kickdrum. And the high-frequency compression driver in its computer-optimized waveguide conveys all the brilliance and snap of your snare drum and cymbals.



Setup Simplicity

The Strike Amp 12 has all the versatility and features needed to fit in anywhere and it’s a snap to set up and use – featuring a lightweight and flexible tilt-back cabinet design that can also be pole-mounted. You can use it vertically or tilt it back horizontally like a stage monitor.



Hookup Flexibility

Dual XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator means there is virtually unlimited hookup versatility and you’ll never unknowingly overdrive the speaker into distortion. There’s even an XLR output to link another Strike Amp 12 or send your performance to another input device.



Customize Your Sound

Need to customize the sound for that “just right” tone? Use the on-board Contour EQ control. Plus, the Ground-Lift switch eliminates unwanted noise so you can be certain the sound you hear is the purest recreation of your signature tone.

• High Power | 2000 watts of peak power delivers clarity, punch and more than enough headroom for any performance or practice space
• Full Response | Specially-voiced 12-inch woofer and high frequency compression driver deliver full response across the entire frequency range without any artificial coloration
• Setup Simplicity | Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
• Hook-Up Flexibility | XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator; XLR output to link another Strike Amp 12 or send your performance to another input device (connection cables not included)
• Customise Your Sound | Contour EQ switch to control your sound; Ground-Lift switch eliminates unwanted noise

User questions & answers

Question:	Will this work with the alesis surge kit
Answer:	yes- I have a different set up just need 1/4 inch female jack from the cable harness
Question:	Can i play music from my phone via cables?? I connected an aux and it only plays the instraments and not the vocals
Answer:	Im not sure why. There may be some setting you can adjust, I just dont know.
Question:	Why is the sound so terrible when plugging my phone in to play music? I connected headphone to 1/4” and straight into the speaker and it’s terrible
Answer:	They never shipped this item to me.
Question:	Can i play a song that i am following from a mp3 player then play drums at the same time? #alesiprokit
Answer:	Yes. You will not be able to hear it properly without either a speaker or headphones.

Product features

Make Your Sound Your Own

You’ve worked hard to perfect your style. It’s yours and yours alone. You have your favorite sticks - just the right weight and length. You love playing those long triplet fills. No one is going to mistake your playing for someone else’s. Same thing with your sound - it has to be uniquely yours. Don’t trust your sound to an ordinary speaker. You need the Alesis Strike Amp 12 powered drumming speaker.

2000 Watts of Room-Shaking Power

With 2000 watts of explosive bi-amplified power and super high-performance transducers, this speaker will always play loud and clear, in any space, in any situation - whether you’re performing, recording or rehearsing. The heavy-duty 12-inch low frequency driver really adds the “kick” to kickdrum. And the high-frequency compression driver in its computer-optimized waveguide conveys all the brilliance and snap of your snare drum and cymbals.

Setup Simplicity

The Strike Amp 12 has all the versatility and features needed to fit in anywhere and it’s a snap to set up and use – featuring a lightweight and flexible tilt-back cabinet design that can also be pole-mounted. You can use it vertically or tilt it back horizontally like a stage monitor.

Hookup Flexibility

Dual XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator means there is virtually unlimited hookup versatility and you’ll never unknowingly overdrive the speaker into distortion. There’s even an XLR output to link another Strike Amp 12 or send your performance to another input device.

Customize Your Sound

Need to customize the sound for that “just right” tone? Use the on-board Contour EQ control.

Plus, the Ground-Lift switch eliminates unwanted noise so you can be certain the sound you hear is the purest recreation of your signature tone.

Product description

Sonos Playbar is the mountable soundbar for TV, movies, music, and more. Enjoy crisp dialogue and impressive bass from wall to wall with Playbar. Control it with the Sonos app, your remote, and more. Enjoy crisp dialogue and impressive bass from wall to wall with Playbar. Control it with the Sonos app, your remote, and more. Whether you mount it on the wall or place it below your TV on a stand or console, Playbar automatically tunes itself for the best possible sound. Playbar was specially tuned by Oscar-winning sound engineers to emphasize the sound of the human voice so you can always follow the story. Easily connect Sonos speakers in different rooms over WiFi to create a home sound system that brings every room and everyone together.

• The mountable soundbar for TV, movies, music, and more
• Enjoy crisp dialogue and impressive bass from wall to wall with Playbar. Control it with the Sonos app, your remote, and more
• Whether you mount it on the wall or place it below your TV on a stand or console, Playbar automatically tunes itself for the best possible sound
• Playbar was specially tuned by Oscar-winning sound engineers to emphasize the sound of the human voice so you can always follow the story
• Easily connect Sonos speakers in different rooms over WiFi to create a home sound system that brings every room and everyone together

User questions & answers

Question:	I already have a nice subwoofer. Is there any way (even via wireless adapter of some type) that I can use it with the Sonos Playbar
Answer:	Paul, not directly, there are a couple options.. if the subwoofer is powered then you need to buy a Sonos connect and plug the subwoofer into that and then pair that in your settings to your playbar the other option if your subwoofer is not powered you would have to purchase a sonos connect amp and do the same thing, I have done both of these options in my home and they work very well. The sonos connect is half the price Of the sonos sub, you could look at it that way :-)
Question:	Watching movies.. do you have the problem of having to constantly adjust the volume to turn down action and turn up dialog
Answer:	30 years I’ve never had a product which both sounds amazing and deals with this problem, and it is a big problem with a lot of content. Everyone has their own special setting but the only ones that truly work also degrade the great sound. I don’t think electronics can solve this as well as having a sound-dampening room, because that’s what they are mastered for (curtained theatre) and most of us have reflective drywall.
Question:	Is there a way to connect all my inputs to a Denon 1612, connect that to the TV, and have the soundbar play sound from all sources
Answer:	Yes and no. The PlayBar has only one input: fiberoptic. The Denon AVR-1612 does not include a fiberoptic output, so you cannot directly connect the receiver to the PlayBar. But your TV should have a fiberoptic output, so if you connect all the devices to the Denon via HDMI cables, then connect an HDMI cable from receiver to TV, then fiberoptic cable from TV to PlayBar, you should get sound from all sources connected to the receiver. If you do it this way, make sure that HDMI Audio Output is set to ON in the receiver set-up menu. However, connected this way, you will *NOT* get sound from the Receiver's built-in AM/FM tuner, nor will you get sound from any older devices that are connected to the receiver using analog audio/video cables (typically red/white/yellow RCA cables). There really is no advantage to using the Denon receiver in this set-up, unless your TV only has one or two HDMI inputs and you're trying to add more. But you could do that more simply (and inexpensively) with a simple HDMI switch. For simplicity, I'd recommend connecting all devices to the TV with HDMI cables, and connect the fiberoptic output of the TV to the PlayBar. This way the TV handles all source switching and whatever source is selected on the TV will play through the PlayBar. Hope that helps.
Question:	Does anyone know how good the playbar sounds without the subwoofer
Answer:	It sounds pretty good without the subwoofer. We have a small room and have the playbar....two Play 3's and one play 5 and it sounds great. For our small house the subwoofer would be too much and that's saying something as my husband really likes to have some bass going. If you had a huge area to cover you might want the subwoofer. We used to have a bose system with a subwoofer and this sounds as good at that if not better. If you are really into your sound you probably will want something in addition to the playbar like the play 3's and/or play 5's. We went that route because we could move them into other rooms of the house easily. FYI - the playbar is not a petite piece so make sure you have room for it. I hope this helps!

Product description

Delivering rich, dynamic sound from a minimal footprint, the PM-100 is the ideal compact monitoring solution for Roland’s V-Drums. Equipped with 80 watts of power, the PM-100 features a custom full-range speaker system and rugged cabinet specially optimized for reproducing the famously expressive V-Drums sound and response. And with onboard mixing capabilities, you’re able to connect music players and other devices for practice and enjoyment while playing at home.

• Premium all-in-one monitor designed for use with V-Drums electronic percussion products
• Full-range audio system with 80 watts of power, custom 10-inch speaker, and tweeter
• Angled design provides ideal sound coverage for the seated player
• Integrated mixer with independent volume controls and global EQ
• Dedicated V-Drums input, plus 1/4-inch and 1/8-inch line inputs for connecting electronic percussion pads, smartphones, and music players

User questions & answers

Question:	How much noise does this amp make when powered on but with no incoming signal
Answer:	It’s a very quiet amp. In fact I was concerned about this too. No noticeable noise at a medium volume with connected cables.
Question:	do you need to use both red (right) and black (left/mono) cords on the sound module when connecting to the pm-100 80w personal drum monitor
Answer:	No
Question:	Is it better than Roland PM
Answer:	Far better!
Question:	will this 80w monitor be heard in basement practicng w full band all with ther own amps (2elecguitar+1bass
Answer:	I say yes, it is extremely loud, seems underrated in power. I never have it past 4 in my house. Go jam!!

Product features

High-resolution Sound Monitoring, Fine-tuned For Roland’s V-Drums

Delivering rich, dynamic sound from a minimal footprint, the PM-100 is the ideal compact monitoring solution for Roland’s V-Drums. Equipped with 80 watts of power, the PM-100 features a custom full-range speaker system and rugged cabinet specially optimized for reproducing the famously expressive V-Drums sound and response. And with onboard mixing capabilities, you’re able to connect music players and other devices for practice and enjoyment while playing at home.

Pro-Level Sound for Playing V-Drums

The PM-100 is the perfect complement to any V-Drums set. Its compact size is ideal for playing at home, and the powerful custom speaker system delivers rich, full-range sound with inspiring punch and presence. There's also an integrated mixer with independent volume controls and global EQ.

Versatile Onboard Mixing

With its integrated mixer, the PM-100 allows you to monitor backing music and external devices along with your kit. There’s a dedicated V-Drums input, plus 1/4-inch and 1/8-inch line inputs for connecting electronic percussion pads, smartphones, and music players. Independent volume controls are provided for the V-Drums and line input sections.

Intuitive Design

The front face of the PM-100 is angled for optimal sound monitoring while seated at the V-Drums, and a full-width bar handle on top offers a convenient way to carry the monitor and adjust its floor position.

Product description

LyxPro SPA5.5 Speaker/Monitor

LyxPro SPA5.5 is a small and light weighted powerful compact active speaker, w/ Class-D amplifier, its perfect for vocal and instrument monitoring.

The SPA5.5 includes all parts to mount it on a mic stand for portability and space saving.

Powerful PA

The SPA5.5 gives you 150w (125w RMS power) of clear sound, whenever you need a public address system.

can be daisy chained to multiple speakers for large public announcements.

Includes phantom power supply for condenser microphones.

3-channel Mixer with 3-band EQ

Switchable mic/line inputs, RCA and 3.5mm aux (1/8” auxiliary) inputs for CD, MP3, music players, keyboards, etc.

Tune and control the sound easily with the 3-band EQ (bass, mid, treble).

Features

Class-D amplifier

3-channel Mixer

3-band EQ

Phantom power supply

XLR, ¼” inputs

Mic/Line switch

Instrument direct connection switch

RCA, Aux inputs

XLR Thru connection

Echo control

Mounts on mic stand

Strong durable construction

Power on/off switch

And more

Specs

125W RMS power 150W peak

5" Speaker

Sensitivity:

Line1/Line 2 input

MIC: -30dBu ± 2dBu

Line: -10dBu ± 2dBu

Line 3 RCA input: -10dBu ± 2dBu

Main input:

MIC: 0 DbU ± 2dBu

Line: 0 DbU ± 2dBu

Frequency response (MIC input to AMP out): 20Hz – 20kHz ± 3dB

Phantom power: +48V

Compression 20 dBu

Input impedance: 20K Ω

Channel level control: ∞ ~ +30dB

Max. Input level: 20dB

EQ:

High (12kHz): 15dB ± 3dB

Mid (2.5kHz): 15dB ± 3dB

Low (80Hz): 15dB ± 3dB

Connection:

Through XLR, MIC/Line switchable

Main-in: XLR, 1/4" TRS

Max. SPL: 114dB SPL @ 1M

Frequency response: 80Hz – 14kHz (-10dB); 100Hz – 10Khz (-3dB)

Dynamic EQ: Processor controlled

Power: Input voltage: 100V – 240V AC (T 3.15 A H 250V)

Power consumption: 180W max.

Dimensions: 13.5" x 11.8" x 9"

Weight: 6.1 lbs.

• 125w RMS 150w peak speaker with class D amplifier, 3 channel mixer and 3 band equalizer
• +48V phantom power supply for condenser microphones
• XLR, ¼” RCA and 3.5mm (1/8”) inputs (stereo cd mp3)
• Instrument switch for direct connection of instruments
• Can be used as a PA speaker, monitor, guitar amp or karaoke – can be mounted on a microphone stand

User questions & answers

Question:	Can you daisy chain multiple monitors together
Answer:	This is a small speaker suitable for monitor type work. So if you are using it as a quiet practice amp for the keyboard it would work OK. If you are using it as a monitor in a band situation it might not be loud enough - though would work in a more solo or acoustic type situation. Also the speaker breaks up at low frequency at loud volumes so it is not necessarily suited for loud band situations.
Question:	Would it be suitable to use for my Kawai ES8 digital piano
Answer:	it has a input jack that is compatible with your headphone output jack on your phone . Independent 3 channel volume plus main volume . You add a mic and sing along with your iPhone . The exception being if you have an iPhone seven and there is no headphone jack. This speaker does not have Bluetooth connectivity . I 'm happy with both sound clarity and projection .
Question:	Can you connect your iphone into this for youtube karaoke
Answer:	They both sound the same quality to me but I think the Behringer has a little more bass to it.
Question:	I have been using a behringer 205d. anybody heard these side by side against one? if so, how do they compare
Answer:	The Behringers have their own power. Best to back off the speakers and drive with the Yamaha's.

Product description

The POWERPLAY P1 Personal In-Ear Monitor (IEM) Amplifier puts control where it' most useful right at the artist' fingertips. Whether on stage or in the studio, the P1 provides performers and recording artists with a dependable and affordable personal monitoring solution. Drummer-Proof Output The P1' high-power headphone output ensures that as the band gets louder, you'll still be able to hear every nuance of your performance. And the P1' simple user interface makes it easy for everyone to dial in a perfect mix every time. Using the P1 also helps protect your hearing in two ways. First, thanks to a built-in current limiter, unexpected peaks in signal level won't get to your ears. Second, the simple act of wearing headphones or earbuds helps isolate your ears from loud stage volume of instrument amps and monitor wedges. With the P1, you can clearly hear your own performance and blend in the ideal amount of the rest of the band. The Perfect Monitor Mix Dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the P1 and dial-in exactly what you want to hear as you perform. Two simple controls, Level and Balance, help you achieve the perfect mix in an instant. The P1 lets you take control of what you hear and allows the engineer to concentrate on providing the audience the best listening experience. Plus, setup is so fast and easy, letting you concentrate on putting on the best performance when you hit the stage. Power to Last One little 9 V battery lasts up to 12 hours, so the P1 will go as long as your next show or studio recording session! Or, use the optional PSU-SB DC power supply for the ultimate in dependable power. And the P1's metal chassis is built like a tank to handle even your most- demanding and energetic performance. Small enough to hang on your belt or mount on a mic or drum stand.

• In-ear monitor amplifier for personal monitor applications
• High power and "drummer proof" headphones output
• Dual XLR inputs allow for 2-channel mono or stereo operation
• Switchable stereo/mono operation with mix function
• Level and Balance/Mix controls

User questions & answers

Question:	Will this work if you run just one xlr cable to the input? will i get sound in both ears of my in ear monitors
Answer:	51.39 Libras If your question refers to the ancient Roman Libra... 1 pound = 1.40431074 libra
Question:	Could i plug the p1 into a monitor mix (using a speakon -> male xlr cable) that's already powered via an amp? or would this blow things up
Answer:	120v
Question:	For my monitor mix, would I come from the boards AUX channel? Or should I come from a power amplifier? Looking to not blow up my new toy
Answer:	The Clip lights on the front relate to the output levels and their distortion of the the sound coming out of the amp. From the manual: "Should distortion occur, reduced the input level so that the CLIP LED stops lighting up." The Clip limiter switch on the back is related to the input level being fed to the amplifier and allow the amp to "automatically recognize distortion and lower amplification until distortion is reduced to a tolerable level." (also from the manual). It states that at moderate distortion it reduces the input level moderately, and at higher levels of distortion it reduces the audio level more. It seems to be weighted more to reduce the levels on the higher frequencies to protect tweeters (which DO tend to be more fragile) as opposed to woofers. Since I'm running mine in a three way system and the Behringer is only on the low end (~160 Hz and below) I have not engaged the input limiter using the back panel switches, but your application might benefit from that which is why I think they include that as a feature.
Question:	Can i intercept some of the vocalist microphone audio and amplify for an earpiece? My vocalists needs to hear themselves but my mixer is far a way
Answer:	It's a 2 ohm stable stereo power amplifier @ 2000 watts. It can also be bridged to mono @ a 4 ohm load. So, it sounds like it can be used in your application

Product features

Powerplay P1

The Powerplay P1 Personal In-Ear Monitor (IEM) Amplifier puts control where it’s most useful – right at the artist’s fingertips. Whether on stage or in the studio, the P1 provides performers and recording artists with a dependable and affordable personal monitoring solution.

Drummer-Proof Output

The P1’s high-power headphone output ensures that as the band gets louder, you’ll still be able to hear every nuance of your performance. And the P1’s simple user interface makes it easy for everyone to dial in a perfect mix every time.

Using the P1 also helps protect your hearing in two ways. First, thanks to a built-in current limiter, unexpected peaks in signal level won't get to your ears. Second, the simple act of wearing headphones or earbuds helps isolate your ears from loud stage volume of instrument amps and monitor wedges. With the P1, you can clearly hear your own performance and blend in the ideal amount of the rest of the band.

The Perfect Monitor Mix

Dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the P1 and dial-in exactly what you want to hear as you perform. Two simple controls, Level and Balance, help you achieve the perfect mix in an instant. The P1 lets you take control of what you hear and allows the engineer to concentrate on providing the audience the best listening experience. Plus, setup is so fast and easy, letting you concentrate on putting on the best performance when you hit the stage.

Power to Last

One little 9 V battery lasts up to 12 hours, so the P1 will go as long as your next show or studio recording session! Or, use the optional PSU-SB DC power supply for the ultimate in dependable power. And the P1's metal chassis is built like a tank to handle even your most-demanding and energetic performance. Small enough to hang on your belt – or mount on a mic or drum stand, the P1 puts complete balance and volume control in your hands.

More Power to You

With rock solid monitoring, your performance naturally will be at the top of your game. Get the power to hear what you want to hear – with the Powerplay P1. The whole band will thank you!