14 best behringer pa systems

Product description

BEHRINGER ULM300USB High-Performance 2.4 GHz Digital Wireless System with Handheld Microphone and Dual-Mode USB Receiver

• Package of ULM300M handheld microphone and ULM300D dual-mode USB receiver
• High-quality microphone capsule for dedicated vocal applications
• Ultra-compact USB receiver with dual mode analog/digital audio interface
• Digital 2.4 GHz wireless connectivity offers superior sound quality
• Maximum range 200 feet / 60 m

User questions & answers

Question:	What is the typical latency on the ulm300 usb? i have the ulm101 usb and its latency is over 1 second, which is quite annoying and not for pro use
Answer:	Have you installed two fresh AA batteries, then hold the power (left) button until it lights up .. adjust volume :-)
Question:	How do you get the ultra link 300 working? light on mic does not come on even when usb link is in place
Answer:	Nope
Question:	Can you get a second “dongles so the mic will go to two speakers
Answer:	I think with only Bheringer.
Question:	Will this only work with Behringer speakers, or will it work with other speakers attached to a computer
Answer:	select bluetooth with speaker remote. and go to bluetooth on your device scan and connect to the of speaker system named...... bluetooth.

Product description

Ultra-compact 500-Watt, 6-channel portable PA system

• Ultra-compact 500-Watt, 6-channel portable PA system
• Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc.
• Enormous power, incredible sonic performance, and super-light weight means no more lugging around dead weight
• Extremely powerful 8'' woofers and 1.35'' aluminum-diaphragm compression drivers for incredible sound reproduction
• Connect your iPod, iPhone, iPad* or any other MP3 player via Bluetooth*

User questions & answers

Question:	Bass sound good? Fit any speaker stands
Answer:	You could set the speakers on a shelf that would be ~14" deep and hold at least 15# each speaker. Wireless connection to the speakers is not possible. The mixer can be connected, e.g. To an iPad via Bluetooth and to wireless microphones via an included dongle.
Question:	Can I mount the speakers to the wall and connect to the sound board wirelessly
Answer:	It comes with the speaker cords, but ours did not have the microphone.
Question:	Does this come with the necessary cords and with the microphone in the picture
Answer:	Yes there are left and right audio Jack's that will serve that purpose
Question:	Can a CD player be hooked up to this and will it allow for the playing of split track cd's
Answer:	If amazon takes then back I would try that route.

Product features

BEHRINGER EUROPORT PPA500BT

• Ultra-compact 500-Watt, 6-channel portable PA system
• Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc.
• Enormous power, incredible sonic performance, and super-light weight means no more lugging around dead weight
• Extremely powerful 8'' woofers and 1.35'' aluminum-diaphragm compression drivers for incredible sound reproduction
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
• 6-channel mixer section features 2 mono and 2 stereo channels
• Effective, extremely musical 2-band EQ, switchable Pad and Clip LEDs on all mono channels
• Stereo 5-band graphic EQ allows precise frequency correction of main outputs
• Comes with a Behringer XM1800S microphone, mic clip and 20' cables
• Integrated storage compartment for microphone, cables, and accessories

EUROPORT PPA500BT

The EUROPORT PPA500BT packs amazing power and sound quality into a compact, portable suitcase style PA system – that’s fast and easy to set up. The PPA500BT’s integrated 6-channel mixer has enough inputs for 2 microphones, 2 musical instruments, your favorite MP3 player and more. Built-in Bluetooth connectivity allows you to stream music from your smart-phone, tablet or other Bluetooth-equipped device.

Small – but Mighty!

The PPA500BT might look small, and the super-light weight makes it amazingly easy to carry– but it’s really BIG on power and features. The internal 500-Watt stereo amplifier is capable of driving the detachable loudspeakers to rich-sounding and room-filling volume levels. High-powered 8" woofers provide punchy low-end and articulate midrange, and the 1.35" aluminum-diaphragm compression drivers offer crystal-clear sonic reproduction.

Big on Bluetooth Wireless Technology

We know your music lives on your phone, computer or tablet, so we’ve made it easy to access and play through the PPA500BT. With a simple swipe of your finger, you can instantly stream all of your favorite music from any device equipped by Bluetooth wireless technology, such as your iPad, iPod, iPhone or tablet. Streaming music via Bluetooth Technology opens up a tremendous amount of available content, such as a virtually limitless array of online radio-channels, multimedia providers and much more. Imagine that you have the whole PA at your fingertips; control the party from the dance floor or the background music comfortably from your chair. Simple, easy and amazing!

Own the Stage with Digital Wireless

Get wireless-ready with the built-in, dedicated connectivity of our ULTRALINK ULM Series wireless microphone system. Wireless gives you maximum freedom and mobility without the need to run cables. The high-quality sound is provided thanks to the ULM’s digital, license-free 2.4 GHz frequency spectrum.

Product description

Ultra-compact 2 x 100-Watt, 5-channel portable PA system in a briefcase format

• Ultra-compact 2 x 100-Watt, 5-channel portable PA system in a briefcase format
• Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc.
• System sets up in seconds—perfect for entertainment, multi-media presentations, press conferences, board meetings, etc.
• Enormous power, incredible sonic performance and super-light weight
• “Wireless ready" for high-quality BEHRINGER digital wireless microphone system (not included)

User questions & answers

Question:	would sure cordless mic work with this system
Answer:	As the others have said, it is only a PA SYSTEM. YOU WILL NEED A digital delay box/circuit. I sugguest you see a performers center like GUITAR CENTER or other professional music center...If no answer, seek out Prominate RECORDING STUDIOS IN YOUR TOWN, BROADCAST RADIO/TV STATIONS CAN HELP YOU TO FIND A LOCAL SOURCE FOR SUCH A TYPE OF EQUIPMENT DELAYING CIRCUIT...
Question:	Can this system (ppa 200 behr. europort) slow the actual song speed down? i need to slow the song down in order to learn the dance steps to it
Answer:	Yes..!! You can use it. If you see the 4th picture here then just above the power plug, it mentions ''100-240v'' So, I do not think that you need a converter. you can just plug in directly.
Question:	Will i be able to use this equipment in south africa where we use 220-240v
Answer:	I do not believe this has a plug in to add / delete preset reverb to the program. Reverb is selective PER input. I would sugguest that If you look for a unit to play/rent, that you can see the quality vs price... Now a good audio tech could wait for the warranty to expire and give you some way re-engineer a FIXED channel, like mic 1 to trigger the reverb for the assigned input... Other wise, hear it is a little hard to get ahold of Behringer to see if they have a PA that has REMOTE FOOT SWTCH Trigger and price point you can live with? Or whether they personally have modified a PA200 for a customer...I see that it could be popular to do so. I rarely used my reverb/echo since I was using it for straight PA FOR MEETINGS but not for performance...I have the PA150 At 50 watts lower, but it did kick up pretty good in smaller venues at 150watts RMS, hooked up to external wireless mike combos, and mike/line breakout boxes (Matching computer laptop signals to mic input for long lines of signal mono) thru a 75ft "snake" to feed and be fed signals to and from the PA UNIT out to the Pair of the attached speakers mounted on MIC STAND THREADS, with some 2.5-3db LOSS of signal level to speakers with 75 to 80ft of speaker level 4/8 OHM line loss, not typical of a small nucleus personal single/duo PA use designed FOR SMALL PA USE. But if you push in enough signal (S/N with NO distortion/noise, and the output side should be loud enough without creating any distortion/noise but becareful, This system is not designed to forgive....A fine balancing act to not over drive the speakers and Crack them with TOO LOUD. I LIKE IT TAKES WIRELES but I believe you limit yourself with Just Be bringing only wirless. Shire systems would be better...I used cheaper Advance wireless PAIRED receiver/tx mutter either hand mix pairs or lavaliar pairs or one and one which is great, being capable to assign channels with blue freq UGH low channels or GREEN SET frequencys....Note you may have to register your mics and frequencies with the new FCC rules to CUT interference with out nearby users Bottom line...Good starter system that worked well for me, no wireless on my older model, single mix only by the way...But if you want to expand later, then pay for your expansion dreams NOW! SO save up...by more now, it will be cheaper and cleaner. You will need, SPEAKER GRADE, 2 CONDUCTOR PHONE CONNECTOR MALE/FEMALE extension cables. Sugguest 25-35ft, with couplers to extend your wires with system, or MALE/MALE PLUGS. THESE WIRES are impotant, treat them just as well as three find Mike cords...learn how to properly wrap cords up...Tutorials on YouTube! Buy books here understanding basic PA to recording techiques... also...this low price unit has several out pur levels, including to PLAY with sub-wolfer and Line level recording stereo out puts besides speakers, or you could out put to another PA HEAD in Monoral signal mixed. Play/learn and image...You'll be surprise like others that saw my "sewing machine sized" PA. They were amazed. Other companies have same type of competing units...Look for your needs, get expert advice, and support those companies too with your purchases for that advice...You can buy cheaper here?, but other than I and a Few others...hard to get advice on command! Just saying you get what you pay for! Good Luck...
Question:	Can this system work with a footswitch to turn the reverb/effects on and off
Answer:	This system sounds amazing, we have used one for years for weddings and other venues.. The speakers will fit on most any standard speaker tripods.. You will LOVE this PA System!

Product description

Active 1, 400 Watt 15" Pa speaker System with DSP and 2-channel mixer.

• High-power 1, 400-watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• Dedicated DSP function for EQ, system control and speaker protection and built-in Bluetooth* receiver
• 2-Channel mixer with individual mic/line inputs and level controls
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight

Product features

DR115DSP

• High-Power 1,400-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• Dedicated DSP function for EQ, system control and speaker protection and Built-in Bluetooth* receiver
• 2-channel mixer with individual Mic/Line inputs and level controls

DR115DSP

DR115DSP is a versatile active 1,400-watt 12" PA speaker system with DSP and 2-Channel Mixer. This High-Powered 1,400-Watt 2-way PA sound reinforcement speaker system is great for both live and playback applications. This ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels.

DSP and Mixer Functions

The product is designed to contain a dedicated DSP function for EQ, system control and speaker protection and Built-in Bluetooth* receiver. 2-channel mixer with individual Mic/Line inputs and level controls is also included.

Powerful Amplifier and Driver

DR115DSP comes with revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super lightweight design for the everyday user. Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power.

Product description

High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications

• High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
• 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
• Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection

User questions & answers

Question:	Would this speaker be ideal for home karaokee for a room size 15'x
Answer:	It has combo inputs, so you shouldn't need an adapter at all to use a 1/4" mono cable as your input.
Question:	What kind of a adapter would I need to quarter inch mono cable
Answer:	Because it is a stereo signal and a mono jack the signal gets messed up. You need a 1/8th inch (headphone jack) to DUAL mono 1/4 inch. Plug those into inputs 1 and 2 and turn the channels up equally. Then it will sound fine.
Question:	I tried plugging in my phone with a 1/4inch trs to 1/8 inch aux cord and it sounded awful as if the music i was playing was mono..how can i fix this
Answer:	No, it is not battery-powered.
Question:	Is it battery powered
Answer:	You can plug anything you'd like into re 205, but I wouldn't recommend using it for a bass amp. Could be used as a low power practice amp.

Product features

Behringer Eurolive B112D Active 2-Way 12" PA Speaker System with Wireless Option and Integrated Mixer

• High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
• Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
• Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power

Product description

Package of 2 ULM200M handheld microphones and ULM200D dual-mode USB receiver

• Package of 2 ULM200M handheld microphones and ULM200D dual-mode USB receiver
• High-quality microphone capsule for dedicated vocal applications
• Ultra-compact USB receiver with dual mode analog/digital audio interface
• Digital 2.4 GHz wireless connectivity offers superior sound quality
• Maximum range 120 m

User questions & answers

Question:	Are these mics compatible to samson bt speaker with similar features
Answer:	No, they are cardioid. The pick up from the top.
Question:	Are these mics 360 degree ones
Answer:	Unfortunately no. It seems that these microphones are only compatible with the the larger xenyx qx series mixers.
Question:	Hi, Could I use those with the mixer behringer x32 compact? THANKS
Answer:	They are suppose to work together. There is a microphone USB port in the ppa 200
Question:	Are these compatible with the behringer ppa
Answer:	This unit has an up grade from older 150watt model, adding a Wifi Freq. for one 2.4ghz wireless mix optional purchase I would sugguest you order a shire Witless mic or Sennheiser mix and receiver. Handheld cardioid or OMNI DIRECTIONAL cavalier tie tavk miniature mic secceptable to feedback howl. They are of higher quality and longer range. 200 ft or more... Ask a local Guitar Center for recommendations. I do not work for them vut they have choices and flex prices... Stay in the UHF Frequencies...not VHF.

Product description

BEHRINGER EUROLIVE B215XL: 1000-Watt 2-Way PA Speaker System with 15" Woofer and 1.75" Titanium Compression Driver. High-power 2-way PA sound reinforcement speaker system for live and playback applications (250 Watts Continuous / 1000 Watts Peak Power). Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels. Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power. State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction. Ultra-wide dispersion, large-format exponential horn. Overload-protection circuitry ensures optimal HF driver protection. Versatile trapezoidal enclosure design allows different positioning. Stand mounting with 35-mm pole socket. Tilts on its side for use as a floor monitor. Ergonomically shaped handles for easy carrying and setup. 2 professional speaker connectors plus ¼'' jack connectors. High-quality components and exceptionally rugged construction ensure long life. Conceived and designed by BEHRINGER Germany.

These loudspeakers take everything musicians love about the original B215 and upgrade them with the same bass and treble/mid transducers found in Behringer's wildly popular B215A active versions for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger.

High-power 2-way PA sound reinforcement speaker system for live and playback applications (250 Watts Continuous / 1000 Watts Peak Power). Click to enlarge.

View feature diagram. Click to enlarge.

Also available in white.

Triumphant Transducers

Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control.

Big Sound, Lightweight, Low Price

Big here, small there, lots of this, light on that--everyone's got their preferences, but the EUROLIVE B215XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 1000 Watts), they are easy to lift by their recessed handles (38.7 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties?

Stand-Mountable

The B215XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach B215XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and 1/4-inch cable. Because these loudspeakers have two parallel inputs, you can connect up to two of them to any channel on a power amp.

But they don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications.

Choose White, Black, on or off the Wall...

You asked for it, and now Behringer is proud to offer these loudspeakers in black or white. You can also purchase swiveling wall-mount brackets for the B215XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout.

What's in the Box

Behringer EUROLIVE B215XL, User's Manual

• High-power 2-way PA sound reinforcement speaker system for live and playback applications (250 Watts Continuous / 1000 Watts Peak Power)
• Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
• Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
• State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
• Ultra-wide dispersion, large-format exponential horn

User questions & answers

Question:	are these self amplified with XLR inputs
Answer:	no these are passive, non-powered speakers
Question:	Are these bluetooth capable
Answer:	I don't think these speakers were made to be hung, they are pretty heavy (approx. 40-45 lbs.). I only place them on the floors, very sturdy shelves or Heavy Duty Tri pod speaker stands. There's really nothing to hang up with except two built in carry handles on both sides in the back. See the back picture of the Behringer Eurolive B215D speaker. Maybe you could get your own idea on how you want to hang a 45 lb speaker. If I was to really hang this speaker, I probably use a good heavy rope and just hang up from the handles. Good luck.
Question:	What would I order to hang them from a ceiling, and do you have the hardware? I can order through Amazon? or
Answer:	It's not a powered speaker; you have to connect your iPhone to a mixer and then to an amplifier.
Question:	Why is it when i use ¼'' to 3.5mm connector to connect the speaker to my iPhone, the sound is so low even when I max volume
Answer:	Yes it does

Product description

The ULTRATONE K900FX specializes in clean, powerful sound. With this 90-Watt workhorse in your rig, your keyboards will sound their best gig after gig.

Your keyboards will sound their best, gig after gig. Click to enlarge.

Full 3-channel operation with separate Volume and FX Send per channel.

Plenty of connectivity, including a subwoofer out and RCA input.

Channel Your Sound

The K900FX gives you three channels, each with separate volume and FX SEND controls, plus Channel 1 has an additional XLR mic input for direct connection of a dynamic microphone. So, if you're the kind of keyboardist with multiple instruments at your disposal, the K900FX is ready to handle up to three independent signals. It is also ideal for use as an all-in-one solution for keys and vocal applications.

The MAIN Section gives you separate controls for FX RETURN, MASTER VOLUME, PHONES and SHAPE.

Built-In Effects

The onboard 24-bit digital FX processor, with 100 amazing presets, adds a high-tech dash of reverb, chorus, flange, delay, pitch shift and other effects to your sound.

CD Input/Headphone Out

A CD input allows you to play recorded music through the K900FX during performance breaks (or just for playing along), great for CD players, MP3 players, or anything else you want to hook up. A separate headphone output is perfect for quiet practicing.

Stand Mountable

The K900FX also features an integrated 35-mm pole socket for stand mounting and use as a PA system.

Big, Beautiful BUGERA

A 12" BUGERA woofer, made completely in-house by our own skilled artisans, works in connection with a custom-made 1.0" driver for awesome, full-range sound. The K900FX also features a subwoofer output, as well as a line output for direct connection to your mixing console.

Be EQ'd and Feedback-Free

Use the K900FX to bring out the best in your sound via its 5-band graphic EQ with our proprietary FBQ Feedback Protection System. This incredible audio solution immediately pinpoints frequencies that cause feedback, so you get perfect sound every time.

What's in the Box

Behringer K900FX, Power Cable, User's Manual

• Ultra-flexible 90-Watt 3-channel PA System / Keyboard Amplifier
• Powerful 12'' BUGERA woofer and custom-made 1'' driver for ultimate sound reproduction
• Integrated digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies
• Full 3-channel operation with separate Volume and FX Send per channel

User questions & answers

Question:	can you use sep. effects petals, i have a volcal harminizer effects petal,can that be hooked up to my mic
Answer:	Yes! It gives a clean sound, easy to carry, and loud enough for medium size places. I used these for church and they were perfect.
Question:	Can I use it on 220V
Answer:	600 watts !!! No way, try to compare this with another amp such as Roland keyboard amp.I own a Behringer K1800FX, rated at 180 watts, same look and physical size as this one and I would say it delivers about 80 watts at most. This kind of output rating gives me lot of doubts about the manufaturers of lower quality brands (such as Behringer, Pyle, etc...). ROLAND, FENDER don't do that.
Question:	Can I use this as a vocal amplifier/PA
Answer:	I know this is an old question but my answer will apply to just about any amp with a stereo link. A stereo link allows you to connect another amp. The output sends the signal to another amp and the input receives the signal from another amp. Adding another KXD12 using the stereo link would give you a total of 8 channels to work with. I can also say that this will also function as a built in effects loop because I have used it that way.
Question:	Is this amp mainly used for keyboards or acoustic guitars? What is it best suited for
Answer:	Yes, this amp sounds nice for that. However, if you are looking for a LOUD amp this one might not be enough. I recommend you use a preamp or boost your output signal to the KXD12 for best results. It also works good when connected to a PA system. On a side note, I have had intermittent issues with the built in effects unit and the eq sliders are a bit delicate. Overall, for the money I paid, I’ve been happy with the KXD12.

Product description

Ultra-compact 8-channel PA system with dual speakers and detachable 500 Watt powered mixer

• Ultra-compact 8-channel PA system with dual speakers and detachable 500 Watt powered mixer
• Enormous power, incredible sonic performance, and super-lightweight
• Mixer can be used either while installed in the speaker or detached for easy positioning and access
• High-performance MP3 player included to play audio files via USB stick. Extremely powerful 8 inch woofers and 1 inch compression transducers for incredible sound reproduction
• Studio-grade stereo reverb adds finishing touch to your sound

User questions & answers

Question:	Do you need to purchase additional mounting brackets to mount these on speaker stands
Answer:	Yes they do come with speaker cables and a microphone and a microphone cable.
Question:	Speaker cable comes with unit
Answer:	You need powered monitors. My understanding is there is no way to send power to the MON OUT jacks on this system...active monitors only.
Question:	can i use passive monitors in MON OUT jacks
Answer:	Yes, this is the cable I used to do it and it makes the sound infinitely better with the sub: https://www.amazon.com/gp/product/B005298L46/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Question:	Can i add this behringer subwoofer to this system? http://www.amazon.com/gp/product/b00e87omnc
Answer:	Yes, you likely can, because the wireless mic uses USB, not Bluetooth as it seems to be hinted, the mic comes with a USB adapter ULM300D. I have yet to use Bluetooth, so far I used the MP3 wired input with 2 USB microphones ULM200D. Apparently, what you may not have is 3 mic then, unless there is a 3 input USB adapter available or maybe if a USB hub can accept and process ULM200D and ULM300D at the same time. I have not tried that yet either. I am very pleased with this active loudspeaker. We had it on the street last weekend and you can hear it over 5 blocks away and the quality of the sound is excellent. No noise. Just watch for the proximity of the mic when you turn the volume high, there will be some Larsen effect as it is common with unwanted feedback.

Product features

Behringer EPS500MP3 Portable PA System

Looking for the ultimate, all-in-one portable PA system? The Europort EPS500MP3 sets up in less than five minutes and delivers articulate,high fidelity performance, yet weighs only 41.3 lbs/18.8 kg. With its dual 250-Watt amplifiers and custom-designed 2-way loudspeakers, the EPS500MP3 can easily fill a medium- to large-sized room with crystal-clear, vibrant sound-and it's professional-grade features will make you the star of any event! Since Behringer is known for making some of the best-sounding audio mixers, amplifiers and loudspeakers on the planet, it should come as no surprise that the EPS500MP3 provides far superior sound quality. The two satellite loudspeakers,each with a custom-designed 8" woofer and 1" compression driver, provide the rich sonic performance you would expect from a much larger system.

Product description

• Multi-purpose, 150-Watt, active speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio, etc.
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
• 5.25” premium-quality, full-range neodymium driver
• Ultra-low noise 3-channel mixer with 3-band EQ
• 2 "Invisible" Mic Preamps with phantom power for condenser microphones and 1 instrument-ready input (no DI required)

User questions & answers

Question:	Can I use a electric Bass Guitar
Answer:	I'm still confused about this too.At the back of the speaker, below the power switch, it says this:100-240V ~ 50/60Hz 180WFUSE: T 3.15A H 250VBut on the box there is a range of voltages listed (100 V, 120 V, 220 V, 230 V, 240 V) and there's a sticker beside 120 V, and a bar code and number beside it. So maybe the manufacturer produces various versions of this speaker with different voltages? And this particular one I have is 120 V?I checked the manual and under power supply / voltage (fuses) it lists the following info:USA/Canada: 120 V~, 60 Hz (T3.15A H 250 V)UK/Australia: 240 V~, 50 Hz (T3.15A H 250 V)Europe: 230 V~, 50 Hz (T3.15A H 250 V)Japan: 100 V~, 50/60 Hz (T3.15A H 250 V)Power consumption: max. 180 WattsMains connection: Standard IEC receptableDoes that mean they sell different versions of this speaker model depending on the region? I don't know. I emailed Behringer to ask.
Question:	Can this be easily used in Australia with 240v power supply? What would I need
Answer:	You have to do that through the rear, all the connections from the front is input based, so that you can connect your line in, be it a microphone, iPod or media player but from the rear, there are two cannon connections, one is designed as a line-out and the second is for looping through a couple of them together, just incase you have a few units to be used all at the same time. So whichever device, you'll love to capture the audio output with, just make sure it has a cable interface with a basic 3pin cannon plug connector, then you connect it to the line-out (not the second connector as that is an input only for looping multiple units together) then the signal will be recorded sweetly. If you are using multiple speakers maybe like 3 or 4 units looped together, then you must connect the recorder to the last speaker box in the loop as the line-out will be free for tethering any recorder. I hope this helps!
Question:	How would I hook up a hard disc recorder for recording thru this
Answer:	Not that we could find. There were a couple of soft cases at about $80+ each that claimed to fit them. But there was nothing nothing that would suit our purpose - we needed something pretty robust because we ship our units to events with UPS Ground. We purchased four of these http://www.amazon.com/gp/product/B00CBY2EIO/ref=oh_aui_detailpage_o04_s00 and added a quick and dirty customized foam interior to protect the speaker and accommodate the wireless mike system and amp connecting cable etc. We found that we should have added reinforcing tape around the top of the cases to cover and strengthen the hinge areas. We actually use the amp within the box with the box on its side and the lid open. One of the staff picked a unit up by grabbing the lid and it caused the case to split slightly down the side of the hinge. Heavy-duty reinforced tape fixed the problem and we subsequently added the reinforcement to all the boxes. So far so good. The units have survived a return UPS trip from NH to TX and look to be in good shape and the amps etc. were all in good shape. For shipping we tape around the body so the units can't come open. Been very impressed by the speaker system itself. More than adequate for presentations in 200+ seat rooms. In a 100+ seater we have to drop the volume right down.
Question:	Is there some type of carrying case available for the unit
Answer:	No, they mount directly on standard speaker stands.

Product features

EUROLIVE B205D

The ultra-compact B205D packs 150 Watts of amazing Class-D sound into a speaker system so light, you can mount it on a mic stand and aim it right at your ears – for the perfect personal monitor. But don’t let the small size fool you – the B205D cranks out truckloads of high-quality sound; more than enough to serve as a PA system for your more intimate gigs and meetings – and it comes packed with features that will simply blow you away.

The Secret to Amazing Sound

Thanks to our revolutionary Class-D amplifier technology and internal switch-mode power supplies, not only does the B205D sound incredible, but it weighs considerably less than most competing active loudspeakers. The state-of-the-art amplifications system pumps out 150 of the cleanest, punchiest Watts you’ve ever heard, and you can link additional active loudspeaker systems via the handy Thru socket. The built-in 3-channel mixer accepts XLR, TRS and RCA inputs, plus channel 1 features a switchable instrument-ready input – no DI required! A dedicated 3-band EQ (Low/Mid/High) provides simple, yet effective tonal control.

Put the Sound Where You Want It

Space limitations often make it impossible to place full-sized monitor wedges where they can do the most good – and passive monitors require lots of external amplifiers and processing gear to function properly. All this adds up to even more gear to move, and if you don’t know what you’re doing, you can easily damage passive monitors by applying too much, or worse, too little power to them. With the B205D we’ve taken all the guesswork out, giving each loudspeaker its own 150-Watt, Class-D amplifier specifically designed as the perfect mate for the custom-engineered 5.25" neodymium driver.

Custom-Engineered Drivers

Let’s face it; the drivers (otherwise known as speakers) are the only part of a sound system you actually hear. So when it comes to ours, we don’t cut any corners. While some of our competitors outsource theirs, we custom-design and build our speakers from scratch. We wind our own voice coils, process the paper pulp into cones and even machine our own speaker back plates and frames. This enables us to control the quality, keep production costs down and frankly, to make better components. The premium-grade, full-range 5.25" neodymium driver was designed specifically, and optimized solely for use in the B205D.

Value

The EUROLIVE B205D is the ideal PA/monitor system solution for those occasions calling for high-quality sound – with minimal gear. We dare you to compare the B205D to the competition for sound quality, for its professional features – and for its amazingly affordable price.

Product description

Passive 350-Watt 8" PA Speaker System

• High-Power 350-Watt Passive 2-way PA sound reinforcement speaker system
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• Extremely powerful 8'' long-excursion driver provides incredibly deep bass and acoustic power
• State-of-the-art 1" compression driver for exceptional high-frequency reproduction
• Ultra-wide dispersion, large-format exponential horn

Product features

PK108

• High-Power 350-Watt Passive 2-way PA sound reinforcement speaker system
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• Extremely powerful 8'' long-excursion driver provides incredibly deep bass and acoustic power
• State-of-the-art 1" compression driver for exceptional high-frequency reproduction

PK108

The PK108 is a super compact, exceptional 2-way, 350-Watt PA sound-reinforcement loudspeaker with Ultra-Wide sound dispersion and portability that is ideal for live sound, portable PA, monitor wedge and House of Worship applications. This amazingly versatile passive loudspeaker is ultra-and easy to carry and feature pole integrated in the housing and built-in screw thread for easy setup and hanging. Sound reinforcement has never been so easy!

Custom-Engineered Transducers

Our LF and HF transducers are designed specifically for each application – it’s what sets us apart from the competition. When you buy a Behringer loudspeaker, you can rest assured that the transducers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results. The PK108 cranks out Incredibly deep bass and acoustic power with articulate, detailed mids and exceptional highs.

Superb Sound Quality

The PK108 features a powerful 8” long-excursion low-frequency driver for powerful bass, a 1'' compression driver mounted on an ultra-wide dispersion, large-format exponential horn for exceptional high-frequency reproduction. These speaker components were designed specifically for excellent performance and amazing sound every time!

Big Sound, Lightweight and Affordable

Big here, small there, lots of this, just a touch of that – we all have our own personal preferences, but the PK108 puts it all in a convenient, easy to carry package – and really packs a massive punch with power handling up to 350 Watts. Lightweight of PK108 make it easy to lift and transport – and the great-sound is supremely affordable.

Sound Value

The PK108 PA loudspeaker stands head and shoulders above the rest of the pack and delivers exceptional performance, even when pushed to the limit. Lightweight and powerful, with custom designed transducers, massive power handling and extreme portability, the PK108 loudspeaker is ideal for any music application.

Product description

BEHRINGER EUROPORT PPA2000BT

• Ultra-compact 2000-Watt, 8-channel portable PA system | Four Mic Preamps with 48 volts
• Product dimensions – 34.8” D x 13.9” W x 25.9” H | Weight – 68.3 lbs. | Voltage – 120V ~50/60 Hz | Max Output power – 2 x 1000W* | Inputs – Channels from 1 to 8 / Stereo aux in
• Connect your iPod, iPhone, iPad* or any other MP3 player via Bluetooth*
• Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc
• Extremely powerful 10'' woofers and 1.35'' aluminum-diaphragm compression drivers for incredible sound reproduction | Enormous power, incredible sonic performance, and super-light weight means no more lugging around dead weight

User questions & answers

Question:	Estoy interesado en el behringer ppa 2000 bt. dos pregunats. incluiye micrófonos? 2. si lo recojo en orlando cuál sería el valor final con taxes
Answer:	1. Uno microfonos 2. No se
Question:	Is it loud enough to DJ a high school school dance
Answer:	Get a set of passive speakers and go from them to the Behringer speakers. You can use it that way to play a school dance
Question:	Is this item returnable if not satisfied
Answer:	Depending on the vendor policy
Question:	How can i set up/hook in a monitor speaker to my behringer ppa2000bt system
Answer:	THere is rca stereo out to record but with a 1/4 or XLR adapter I think you. Could connect monitor speakers. or what I do,I use the sub woofer out and daisy chain to additional powered speakers like the the BerhingerbB115ds

Product description

EUROLIVE B115D and B112D active loudspeakers are exactly what you've come to expect from Behringer - more power, more features and absolutely more affordable! Our engineers have really outdone themselves, creating two self-contained PA solutions that merge state-of-the-art, 1,000-Watt Class-D power amp technology, built-in wireless microphone capability and exceptional portability. These professional active loudspeakers are destined to become legends in its own right, alongside the other EUROLIVE models that have made Behringer the world leader in active loudspeakers. Cut the Fat; Keep the Beef. We drew from our considerable experience to build these performance-grade loudspeakers and made them lighter (B115D: 38 lbs./17.2 kg; B112D: 32 lbs./14.5 kg) and more powerful. We started with custom-engineered Class-D power amps for the ultimate in low-distortion power and efficiency. Backed by SMPS (Switch Mode Power Supply) technology, the high-tech alternative to heavy transformers and massive heat sinks, these loudspeakers can run cool all day and all night without even breaking a sweat! Wireless Wonderland. Until now, adding wireless microphones to a PA system meant either a mess of wires and dangling receivers or worse, a built-in receiver with dodgy performance and a hefty price tag. Those days are officially over thanks to Behringer ULTRALINK Series wireless mics that feature our exclusive, ultra-compact 2-channel receiver. Just plug the receiver into the dedicated wireless port on the rear panel and you have full access to two channels of supremely stable, natural-sounding wireless connectivity. Sold separately and available in hand-held or headset models, Behringer ULTRALINK Series wireless mics will immediately (and inexpensively) expand your B115D/B112D to handle virtually any live sound application. Item is Hazmat Non Returnable.





    High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications

    Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels

    "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)

    2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs

    Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection

    Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight

    Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power



    State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction

    Ultra-wide dispersion, large-format exponential horn

    Additional Line output allows linking of additional speaker systems

    Versatile trapezoidal enclosure design allows different positioning:

    - Stand mounting with 35-mm pole socket

    - Tilts on its side for use as a floor monitor

    Ergonomically shaped handles for easy carrying and setup

    Conceived and designed by BEHRINGER Germany

• High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
• 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
• Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection

User questions & answers

Question:	hi can i use bluetooth and microphone in this
Answer:	The Behringer B115D delivers clear powerful sound. I'm quite pleased and I haven't had to turn the volume beyond the 50% as yet. I personally use it for DJing at parties and wedding receptions, however I've seen this system used by live bands. This would be a great fit for live sound events
Question:	Would this be a good fit for live sound like in a worship house
Answer:	You can daisy chain them to your hearts content!! they have 2 inputs and and 1 mixed output of them both together. The levels/gain and EQ settings are not passed through. Got a pair of them and daisy chain them when I do a simple iPod/MP3/Laptop hook up to them but also use them isolated for djing. GREAT SET OF SPEAKERS!!!!! Treat them right and they will work great for you!
Question:	Can 2 of these be daisy chained
Answer:	I think one speaker will do it... we use it in our high school gym-- and it get loud... i dont know about the passive speaker... its great!
Question:	Need good sound for a monthly party (ipod only) , should I get 2 of these, or one of these and it will power a passive speaker as well
Answer:	Sorry I am really not for sure!

Product description

Behringer MPA200BT all-in-one portable 200-watt speaker with wireless microphone, remote control via smart phone, Bluetooth audio streaming and battery operation

• All-in-one portable PA system with full Bluetooth* connectivity
• Incredibly simple to set-up and use - no technical background required. DSP presets for application type
• 200 Watts of powerful, high-quality sound for audiences of up to 500 people
• Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc.
• High-Performance BEHRINGER ULM digital wireless microphone system included

User questions & answers

Question:	can you have the wireless mic and the blue tooth work at the same time
Answer:	I am not sure you can add an additional Behringer wireless mic.
Question:	Do I need a special adapter to add a second behringer microphone? Which microphone do I purchase for this
Answer:	I use the microphone that came with the unit, however you can use any headset microphone you wish, there are two inputs and a Bluetooth input for a total of 3. You would be subbing out the included wireless mic for your own headset. I have no real recommendations for a headset microphone as it is very dependent upon your price point. I have 3 different headsets, the Shure ($300) is the most reliable, but also the most expensive of what I own. I also own a Rockport UHF dual headset, which is the most bang for the buck ($74) and a Nady VHF headset ($49) which is dropout prone. Stay away from VHF is my biggest recommendation. This unit is phenomenal, you could perform anywhere in the world with it due to its extreme portability. A wireless headset WILL tether you to needing a power source.
Question:	Can I use a headset mic in place of handheld? If so, any recommendation on a wireless beltpack that's compatible
Answer:	Yes it can . Covered in manual . Pair one device to your Bluetooth source and it becomes the master . Link second speaker to first speaker within speakers Bluetooth interface (linking takes couple of minutes - wait ) . The second speaker becomes slave. Master process stereo left ; slave processes stereo right
Question:	Can this be paired with 2nd identical unit
Answer:	Not bluetooth, but does do wireless with Behringer's "wireless stick" and their mics. works great and handles two mics per speaker.

Product features

EUROPORT MPA200BT

All-in-One Portable 200-Watt Speaker with Wireless Microphone, Remote Control via Smart Phone, Bluetooth Audio Streaming and Battery Operation

Use the extremely portable, yet powerful EUROPORT MPA200BT PA system to stream songs from your Bluetooth-enabled smart phone at the next company picnic, or to get your message across on the playing field. With its 200-Watt amplifier and premium 2-way speaker system, the MPA200BT provides superb sound for up to 500 people – and the rechargeable battery lasts up to 20 hours. We’ve even included one of our high-performance ULM300USB digital wireless microphones for a supremely easy-to-use wireless, go-anywhere PA system right out of the box!

Bluetooth Ready

The days of tape decks and CD players are long gone. Now your music lives on your smartphone or computer tablet, so you can stop searching for those outdated cables and fancy adapters. Now with a simple wave of your hand, you can stream music from any Bluetooth-equipped device such as your smart phone, tablet, laptop, etc. Now, isn’t that easy?

Own the Stage with Digital Wireless

You are ready to go wireless right out of the box, thanks to the included ULTRALINK ULM300USB wireless microphone system. Wireless gives you maximum freedom and mobility without the need to run cables. The highest-quality sound is provided thanks to the ULM’s digital, license-free 2.4 GHz frequency spectrum. The ULM wireless system combines professional-quality sound with simple setup and an intuitive interface for legendary audio performance. Just plug in the ULM receiver 'dongle', and instantly you have an exceptional wireless mic system. Freeing you from cables is the simply easy way to own the stage.

Comprehensive Remote Control via Smart Devices

MPA200BT PA speakers can be controlled via dedicated apps for both Android and Apple iOS Bluetooth-enabled devices – and it's extremely easy. Just pair your MPA200BT with your smart device, and the control app automatically detects your setup and adapts for mono or stereo mode. Once successfully paired, you can adjust the speaker settings with a simple swipe of the screen or by pressing the settings icon. All MPA200BT speaker settings can be accessed from the control app.

Ultra-Portability

The great-sounding MPA200BT is truly portable (26.6 lbs/12.1 kg) thanks to its highly efficient Class-D amplifier, and the onboard battery pack keeps the party going for up to 20 hours – without a power outlet in sight!

Built-in Mixer

Loaded with features, the MPA200BT comes equipped with an onboard 4-channel mixer with connectivity for streaming audio directly from your Bluetooth-enabled device, the same ultra-low noise, high-headroom mic preamps that have made our mixers legendary – and an Aux input for that aforementioned CD player.

Sound Value

Whether you set your MPA200BT speakers on a table, or mount them on optional speaker stands, you’ll enjoy music streaming through this rich-sounding, easy-to-setup system in mere moments.