13 best seismic audio speaker stands

Product description

Tripod Speaker Stand for PA Speakers - Model # SpeakerStandLG, Brand New, Heavy Duty Tripod Speaker Stand, Stands up to 72" tall, Holds up to 200 lbs., Fits 1.5" Speakers, Comes with an adapter to fit 1 3/8" Speakers, 1.5 inch steel tube design, Large heavy duty adjusting knob and very sturdy, Pin lock with multiple holes, Brand New, One year warranty. These are heavy duty steel tripod speaker stands.  These are universal stands and will fit 1.5" as well as 1 3/8" speaker stand hole mounts on the bottom of your PA Speakers.  These are ideal for the gigging musician or DJ who is setting up and tearing down their gear on a regular basis.  These will handle the wear and tear of every day use.

• Model Number: SpeakerStandLG
• Tripod Steel Stand
• Fits 1.5" Speakers
• Adapter for 1 3/8" Speakers
• Brand New/One Year Warranty

User questions & answers

Question:	will be use adapt for fluance bipolar speakers
Answer:	Hi,These Tripod Speaker Stands come with an adapter to let you mount speakers with a 1 3/8" pole mount, or speakers with a 1.5" pole mount.Thanks,Rusty

Product description

Pair of Steel Speaker Stands Model # SA-Speaker Stand 4 (set of 2) Brand New Heavy Duty Tripod Speaker Stands Stands up to 72" tall Holds up to 200 lbs Fits 1 3/8 inch hole tight or 1.5" hole loose 1.5 inch steel tube design large heavy duty adjusting knob and very sturdy Brand New, Never used Pin lock with multiple holes These speaker stands are brand new. One year warrantyThis listing is for two of these speaker stands. You will receive a pair of speaker stands, pictured and described above.  These are heavy duty steel stands.

• Model # SA-SS (Pair)
• Heavy Duty Tripod Speaker Stands.  Stands up to 72" tall.  Pin lock with multiple holes
• Holds up to 200 lbs.  Fits 1 3/8 inch hole tight or 1.5" hole loose
• 2.5 inch tube design.  Large heavy duty adjusting knob and very sturdy
• These speaker stands are brand new.  One year warranty.

User questions & answers

Question:	what is the leg spread
Answer:	I used them last winter,the speakers i used were heavy. I will guess at least 3 feet.

Product description

Portable Powered 15 Inch PA or Karaoke PA Speaker System Model: PAIO15 | Pair of 15" Speakers (1 Active, 1 Passive), Pair of Speaker Stands, Wireless Microphone, 20' Speakon Speaker Cable, Power Cord, Bluetooth Remote Control.. Power Ratings: 500 Watts RMS; 1000 Watts Program; 2000 Watts Peak. Class A/B High Powered Amplifier | 15 Inch Woofer with a 30 oz Magnet and 2 Inch Voice Coil per Cabinet | 1" Tweeter per Cabinet. Nominal Impedance: 4 Ohms | Frequency Response: 45Hz - 18kHz | Sensitivity: 98 dB. Built In 2 Band EQ l Built In Bluetooth | Built-In USB (2.0)/SD/MMC/MP3 | FM Built in | Connector(s): XLR, 3.5mm, RCA. Wireless Remote Included to control MP3 functions. Wireless VHF Microphone Included | 260.3 mHz Range. Injection Molded Polypropylene Enclosure with side handle. 20 Foot Speakon speaker cable to connect speakers | Power Cord included. Pair of heavy duty Speaker Stands also Included in this package. Dimensions: 16" x 13.5" x 26" per Cabinet. Weight: Active Speaker: 26.2 lbs | Passive Speaker: 22.3 lbs. Warranty: One Year WarrantyThe PAIO15 is the complete portable, party, or karaoke PA System. This package has everything you need for a professional PA setup to get the party started and keep it going. In this package you get two 15" PA/DJ speakers, one active and one passive. The active speaker has a built in amplifier to power the passive. A 20' Speakon cable is included to connect the two speakers. Combined, these speakers put out an amazing 1600 watts of power. Also included in this package is a pair of Speaker Stands, a Wireless Microphone, Remote Control and Power Cable. This package is truly all-in-one and has everything you need.

• Model: PAIO15 | Pair of 15" Speakers (1 Active, 1 Passive), Pair of Speaker Stands, Wireless Microphone, 20' Speakon Speaker Cable, Power Cord, Bluetooth Remote Control.
• Power Ratings: 500 Watts RMS; 1000 Watts Program; 2000 Watts Peak
• Class A/B High Powered Amplifier | 15 Inch Woofer with a 30 oz Magnet and 2 Inch Voice Coil per Cabinet | 1" Tweeter per Cabinet
• Nominal Impedance: 4 Ohms | Frequency Response: 45Hz - 18kHz | Sensitivity: 98 dB
• Built In 2 Band EQ l Built In Bluetooth | Built-In USB (2.0)/SD/MMC/MP3 | FM Built in | Connector(s): XLR, 3.5mm, RCA

User questions & answers

Question:	I need at least 2 more wireless microphones. What would you recommend to work with this system
Answer:	These work great. Got them at Amazon too. innopow Metal Dual UHF Wireless Microphone System,inp Metal Cordless Mic set, Long Distance 150-200Ft ,16 Hours Continuous Use for Family Party,Church.
Question:	Anyone have an idea how well this would work in a church of about 50 people
Answer:	Well , it depends how large the building is. But for a 50 X 80 enclosed space is far more than enough.
Question:	PA system with 2 speakers w/ stands, wireless mic, plenty of power for track meet announcing - but yet not $2500 kind pro track uses
Answer:	The PAIO15 might barely cover this distance of a football field, but to make announcements over the volume of any crowd, I don't think these will suffice. Thanks, Rusty
Question:	Can I connect a pair of rockville speakers to this? so I can have
Answer:	Yes you Can But they cant all be in line. You will need a left and right

Product description

Metal Speaker Tripod Stand Mount Metal Top Hat Mount Each bid is for one mount. 1 3/8" tripod speaker mounts. 3 5/8" deep 3 1/8" from hole to hole across 2 1/4" from hole to hole side by side Black in color Metal This mount is brand new. One year warranty This listing is for one of these metal speaker stand mounts.  You will receive 1 mount pictured and described above.

• One metal top hat internal speaker mount
• 1 3/8" tripod speaker mount
• 3 5/8" deep
• Black in color
• This mount is brand new.  One year warranty

User questions & answers

Question:	Does this fit Mackie TH-12a
Answer:	The best way I know answer you question is to remove one of the stand mounts off of your speakers and measure it to get the dimensions and then find out what the dimensions of the new stand mount. That's how I knew wether or not the mount would fit my speakers, because I had bought a set of them for my PA speakers and I love them. They are far more durable than the plastic ones and my tripods stands fit alot better now that I started using them.
Question:	Can this be mounted in a sub woofer
Answer:	Hi, Absolutely. These "top hats" or pole mounts are installed on all of the 10, 12, 15 and 18" subwoofer models we offer. We also sell a single or set of adjustable subwoofer pole mount stands, to put your mains on top of your sub, and the pair sell for $49.99. You can check these out here: https://www.amazon.com/Seismic-Audio-Subwoofer-Speaker-Stands/dp/B017C16CII/ref=sr_1_4?ie=UTF8&qid=1532466019&sr=8-4&keywords=sub-stand+seismic+audio --------------------------------- Thanks, Rusty
Question:	What is the outside diameter of pipe on this item
Answer:	Hi, The external diameter of these Top Hats is 40 mm or 1.58". Thanks, Rusty

Product description

Adjustable PA Wall Speaker Stand Mount Model: SA-SWM2, Horizontal adjustment, Multiple Vertical Adjustments, Heavy duty Metal Construction, Holds up to 150 lbs., Fits 1 3/8" holes tight and 1.5" loose, Pre-assembled, ready to install, 10" x 5" wall plate, 12" distance from wall, 5" tall speaker mount shaft, Brand New. These are ideal for permanent installations, churches, bars, restaurants, karaoke use, or just getting your speakers off the ground.  These can be angled in multiple positions, allowing you to mount these just about anywhere.

• Model Number: SA-SWM2 (Steel Wall Mount for PA/DJ Speakers)
• Horizontal and Multiple Vertical Adjustments
• Heavy Duty Steel Construction - Holds 150 lbs.
• Fits 1 3/8" holes tight and 1.5" loose
• Pre-assembled, ready to install

User questions & answers

Question:	How many wall mount are included
Answer:	Thank you for your interest in the SA-SWM2 from Seismic Audio. This listing is for one wall mount. Have a great day!
Question:	Are these sold in pairs or single
Answer:	Hello, thank you for your interest in the SA-SWM2 wall mount. This particular listing is for a single, but we also sell them by the pair.

Product description

External Tripod Speaker Stand Mount 1 3/8" tripod speaker mount. Tightening knob Black in colorThis listing is for one of these Seismic Audio tripod speaker mounts.  You will receive one mount, pictured and described above. 

• One External mount
• 1 3/8" tripod speaker mounts.
• Tightening knob
• Black in color
• These adapters are brand new.  One year warranty

User questions & answers

Question:	Es de plástico o metal
Answer:	Es de plastico. Have a great day!
Question:	Are these metal or plastic
Answer:	Plastic
Question:	Overall size of bracket
Answer:	Hello, thank you for your interest in the Adapter Mount from Seismic Audio. The longest width is 7 3/4". Have a great day!

Product description

Steel Monitor or Amp Stand - Model # SR06, Stable Platform, Non-Slip Strips on Top, Locking Pin, Adjustable from 32.25" to 44.25", Can be positioned into tight spaces, Leveling floor spikes and rubber feet are included for different surfaces, Brand New, One Year Warranty. These are ideal for getting your PA Gear off the floor such as Monitors, Amplifiers, Guitar Amps, etc. These stands take up a small foot print of floor space and come with floor spikes for carpeted areas and rubber feet for hard surfaces.

• Model # SR06
• Stable Platform
• Non-Slip Strips on Top
• Locking Pin
• Adjustable from 32.25" to 44.25"

User questions & answers

Question:	How is the product pack
Answer:	Hi, These SR06 monitors stands are packaged in cardboard. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty

Product description

Pair of External Tripod Speaker Mounts Set of two 1 3/8" tripod speaker mounts. Tightening knob External Mounts Black in colorThis listing is for a two of these Seismic Audio external tripod speaker mounts. You will receive two identical mounts, pictured and described above.

• Set of two
• 1 3/8" tripod speaker mounts.
• Tightening knob
• Black in color
• These adapters are brand new.  One year warranty

Product description

Sub Woofer Top Pole Stand - Model # SA-Subwoofer Stand, Brand New, Heavy Duty Speaker Stands , Adjustable, extends from 36" to 54" , Holds up to 200 lbs. (Steel) , Fits 1 3/8 inch hole tight or 1.5" ; , large heavy duty adjusting knob and very sturdy, Brand New, Never used , Pin lock with multiple holes . This listing is for one of these speaker stands. You will receive a one of these speaker stands, pictured and described above.

• Model # SA-Subwoofer Stand
• Heavy Duty Subwoofer Speaker Stand. Adjustable: extends from 36" to 54"
• Holds up to 200 lbs. (Steel). Fits 1 3/8 inch hole tight or 1.5" hole loose
• large heavy duty adjusting knob and very sturdy
• Brand New, Never used. Pin lock with multiple holes.

Product description

Recessed Wheels for Speaker Cabinets - MODEL:SAWHB30, CONTENTS: Dual Wheel Kit for PA Speaker Cabinets, CONDITION: New, DIMENSIONS: L Frame: 10" W x 3" D (each side), FEATURES: Recommended Cabinet Cutout: 1.5" W x 2" D - Ideal for making heavy PA Speakers portable - Heavy Duty Steel Frame - Recessed 2.5" Rubber Wheels, CAPACITY: 150 lbs. per set, CONSTRUCTION: Metal, COLOR: Black, WARRANTY: One Year Warranty. Why carry your speakers around, when you can roll them around?! The Seismic Audio Dual Wheel Kit was designed for use on PA Speaker Cabinets. These recessed 2.5" casters feature a heavy duty steel housing, not the cheap plastic kind that buckle under pressure! The dual wheel kit has a carrying capacity of 150 lbs. per set! Its discreet design only allows the wheels to extend a little more than 1/2" from the housing! Make your Seismic Audio Speakers easily portable with this Dual Wheel Kit! With your purchase, you will receive a Dual Wheel Kit pictured and described above. So, put it in your cart and be ready for all the road throws at you!

• MODEL:SAWHB30
• CONTENTS: Dual Wheel Kit for PA Speaker Cabinets
• CONDITION: New
• DIMENSIONS: L Frame: 10" W x 3" D (each side)
• FEATURES: Recommended Cabinet Cutout: 1.5" W x 2" D - Ideal for making heavy PA Speakers portable - Heavy Duty Steel Frame - Recessed 2.5" Rubber Wheels

User questions & answers

Question:

Does this product come wit the screws necessary to attach this to the speaker

Answer:

Hi V,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! These SAWHB30 Dual Wheel Kit for PA speakers do not come with the screws you will need to mount them to your PA cabinet. Also, this listing for the single kit does not have much in the way of photos. You can check out the listing for the pair of these kits, and there are additional photos and some photos with measurements indicated:SAWHB30 Pair on Amazon:https://www.amazon.com/Seismic-Audio-SAWHB30-2Pack-Cabinets-Speakers/dp/B017C1558Q/ref=sr_1_2?s=musical-instruments&ie=UTF8&qid=1478790784&sr=1-2&keywords=SAWHB30Let us know if you have any questions.Thanks,Rusty

Product description

Pair of PA Tripod Speaker Stands Model # SpeakerStandLG (Pair), Brand New, Heavy Duty Tripod Speaker Stand, Stands up to 72inchtall, Holds up to 200 lbs, Fits 1.5inch Speakers, Comes with an adapter to fit 1 3/8inch Speakers, 1.5 inch steel tube design, Large heavy duty adjusting knob and very sturdy, Pin lock with multiple holes, Brand New, One year warranty. These are heavy duty steel tripod speaker stands. These are universal stands and will fit 1.5inch as well as 1 3/8inch speaker stand hole mounts on the bottom of your PA Speakers. These are ideal for the gigging musician or DJ who is setting up and tearing down their gear on a regular basis. These will handle the wear and tear of every day use.

• Model Number: SpeakerStandLG (Pair)
• Tripod Steel Stand
• Fits 1.5inch Speakers
• Adapter for 1 3/8inch Speakers
• Brand New/One Year Warranty

Product description

Pair of Professional 15" Speaker MainsModel #: SA-15T (Set of 2). 15" Woofer. 350 Watts RMS; 700 Watts Peak per cabinet. Woofer has 50 ounce magnet and 2.5" kapton voice coil. 1.5" Titanium tweeter driver with 10 ounce magnet and 1" throat. Two 1/4" inputs and two Speakon inputs. Frequency Response: 45Hz to 20kHz. Crossover: 12/18db per octave 3K hz high power with dual glass bulb tweeter protection. Impedance: 8 Ohms. Sensitivity: 96 db. Dual ports. Full metal grill. Recessed Handles. Black carpeted covering with black metal corners. LxWxD: 25"x20"x16". Weight:  52 lbs per cabinet. Condition: New. One Year WarrantyThis listing is for a pair of these 15" speaker cabinets.  You will receive two identical speaker cabinets, pictured and described above.  Each speaker cabinet has the specs above.These amazing 15 inch Speaker Cabinets deliver every sound loud and clear with a 15 inch woofer, 1.5 inch titanium tweeter driver, a frequency response of 45Hz to 20,000Hz, and 350 watts RMS, 700 watts peak power per cabinet. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these speakers will deliver the sound you want! Great quality mains are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive a pair of 15" Speaker Cabinets pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

• Woofer - 15" 2 way w/ 50oz magnet & a 2.5" kapton voice coil.  350 Watts RMS – 700 Peak
• 8 ohms 45Hz –20KHz Sensitivity: 96 db Tweeter: 1.5" Titanium driver 10z. magnet & 1" throat
• Crossover: 12/18db per octave 3000hz high power w/ dual glass bulb tweeter protection
• 5/8 plywood front panel. Black carpet with black metal corners. Recessed handles. Metal Grill
• Input terminal has two 1/4" & two Speakon inputs. 1.5" stand mount. 29" T - 19" W - 15" D

User questions & answers

Question:	do i need a amp to hook these babies up to my home stero
Answer:	Hi, This may be a Yes and No answer. Your home stereo may already have some AMPLIFIED outputs, usually seen in the form of Red and Black binding posts or push lock terminals for raw speaker wire, to power some PASSIVE speakers. Usually the speakers for home stereo or home audio surround sound receivers are much smaller "bookshelf" style speakers, which typically require less wattage to "drive" or "power" than something like these full size Seismic Audio SA-15T. Each one of these SA-15T cabinets is rated at 350W RMS at 8 Ohm. Ideally your home stereo's AMPLIFIED output would be around 1.5 times this rating, or 350W RMS * 1.5 = 525W RMS at 8 Ohm. If your home stereo is rated around this 525W RMS at 8 Ohm per channel, then you are good to go. If not, you may want to look into going with a separate power amplifier for these SA-15T, something like our MBG-4000, which you can find on Amazon here: https://www.amazon.com/Seismic-Audio-MBG-4000-Power-Amplifier/dp/B007W4VN1M/ref=sr_1_1?ie=UTF8&qid=1520266248&sr=8-1&keywords=mbg-4000 If you go this route, you will need to find some line-level output from your home stereo, something like the RCA red and white female jacks or an 1/8" headphone or "Auxiliary" output. This would need to be an OUTPUT not an input. This output would allow you to send the line-level signal from the home stereo into the MBG-4000 amp, so it can amplify this signal to speaker level, and send on to the SA-15T. If you go the route of a separate amp, you will need the line-level cable to get out of the home stereo and into the MBG-4000 amp, and the "speaker cables" to output from the amp and connect to the SA-15T speakers. You can email us directly at [email protected] if you have any questions. Thanks, Rusty
Question:	How are these speakers powered? D cord
Answer:	These are passive speakers. They can accept Speakon or 1/4" speaker cables.
Question:	My amp says use 6-16 ohm speakers. does that mean 6 speakers at 16 ohms or 6 through 16 ohm. these speakers are 8 ohm. do i have an option? sean b
Answer:	Hi Sean, This 6-16 Ohm on your amp/receiver is indicating the impedance of the speakers you may connect to each channel. You are typically more interested in the lower number, this 6 Ohm, as this is the LOWEST STABLE IMPEDANCE for these output channels of your receiver. With impedance, the lower the number, the more work is being done. This amp is telling you that it can go down to 6 Ohm, but no lower. Should you connect a lower impedance speaker, or chain of speakers, then the output channel of the amp will fry. Since these SA-15T are rated at 8 Ohm, your amp can support one per channel, at least in terms of the impedance. You must also consider the wattage output of your amp, at this impedance of 8 Ohm. These SA-15T are rated at 350W RMS at 8 Ohm. You would want to at least match this wattage rating, with the ideal wattage rating being around 1.5 times the wattage of the speakers, or 350 * 1.5 = 525W RMS at 8 Ohm. This would be the ideal power rating for the amplifier you are using to drive these SA-15T. If your amplifier is rated lower in terms of wattage than this 350W RMS at 8 Ohm, then you will be underpowering these SA-15T and this could lead to poor performance from the speaker, when it is not the fault of the speaker. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty
Question:	How to i hook up this pair of speakers to a europower PMP 4000 mixer
Answer:	Hi, You should be able to use Speakon cables to connect from the powered outputs of your Behringer PMP4000 to one of the Speakon input jacks on each speaker. You can check out our 25 foot Speakon cables, product code TW12S25 here: TW12S25Pair: https://www.amazon.com/Seismic-Audio-TW12S25Pair-25-Feet-Speakon/dp/B004HKMROQ/ref=sr_1_1?ie=UTF8&qid=1503070124&sr=8-1&keywords=tw12s25pair Thanks, Rusty

Product features

Description

Pair of Professional 15" Speaker Mains

• Model #: SA-15T (Set of 2)
• 15" Woofer in each Cabinet
• 350 Watts RMS; 700 Watts Peak per cabinet
• Frequency Response: 45Hz to 20kHz
• 3K hz high power with dual glass bulb tweeter protection
• Impedance: 8 Ohms
• Sensitivity: 96 db

Features

• Crossover: 12/18db per octave
• Woofer has 50 ounce magnet and 2.5" kapton voice coil
• 1.5" Titanium tweeter driver with 10 ounce magnet and 1" throat
• Two 1/4" inputs and two Speakon inputs
• Dual ports

Specifications

• Full metal grill
• Recessed Handles
• Black carpeted covering with black metal corners
• LxWxD: 25"x20"x16"
• Weight: 52 lbs per cabinet
• Condition: New

Product description

Pair of 20 Inch Subwoofer Mounting Poles Model # SA-SPOLE2 (Pair). Contents: Pair of 20 Inch Subwoofer Pole Mount Speaker Stands. Condition: New. Application: Mounting Mains on Subwoofers. Construction: Heavy Duty Steel. Dimensions: 20 Inches Tall. Weight: 0.60 lbs each. Features: Fits 1 3/8 inch hole tight or 1.5" hole loose - Heavy Duty Subwoofer Speaker Stand. Warranty: One Year WarrantyThe SA-SPOLE2 Subwoofer pole is designed to mount your main speaker on top of your subwoofer. This sub pole is only 20" tall and gives your tops more stability by reducing the amount of space in betweeen your main speaker and your subwoofer. The reduced height of this sub pole makes it an ideal solution when there are physical restrictions of the venue you are playing. Although a shorter sub pole, it still carries a weight capacity of 200 pounds and is made of steel construction. The SA-SPOLE2 fits all speakers that have a 1 3/8 inch mounting slot. The Seismic Audio brand was designed with the notion that every musician should have access to high quality Pro Audio gear at an affordable price! With your purchase, you will receive two 20 inch subwoofer pole pictured and described above.

• Model # SA-SPOLE2 (Pair)
• Contents: Pair of 20 Inch Subwoofer Pole Mount Speaker Stands
• Condition: New
• Application: Mounting Mains on Subwoofers
• Construction: Heavy Duty Steel

User questions & answers

Question:	The descriptions says 1 3/8 diameter poles, so will they be too loose for 1.5 inch speaker mounts
Answer:	Hello, thank you for your interest in the SA-SPOLE2. They would be looser on a 1.5" pole mount, but whether that is "too loose" is an opinion. On a 1 1/2" pole mount you would get a slight slant and the speaker would be very easy to rotate. If that is not an issue, then this will be fine. If it is, you may be able to resolve that by putting a cocktail napkin over the top of the pole.
Question:	Can you use as a drop mount for dolby atmos speakers for installing on the ceiling
Answer:	No. These are made for PA speakers / sub with pole mounts.
Question:	Can these be used to extend normal speakers stands for a regular speaker
Answer:	Hi Joyce, No, these are meant to be used on top of subwoofers, and to allow you to mount your main speakers on top of your subwoofers. Thanks, Rusty
Question:	What is the measurement from the bottom of the speaker to the top of the sub when the speakers are mounted
Answer:	Hello, thank you for your interest in the SA-SPOLE2. The SA-SPOLE2 is 20 inches tall. If you were using my metal top hat as the pole mount on each speaker, you would lose 4" of pole per side so you would get 12" of separation. Now, not all pole mounts will be the same depth, so your actual distance may vary, but most of the time this 12" number would be close to what you see.