12 best m audio audio amplifier

Product description

The M-Audio Bass Traveler is a portable headphone amplifier with a pair of 1/8-inch headphone jacks, so you can increase the quality of what you’re listening to, then share it with someone else.

The sound quality out of a mobile device’s headphone jack or coming from the standard-issue computer’s soundcard leaves a lot to be desired, even if you’ve got spectacular headphones.

Many personal digital music players have a limited output for driving high-quality headphones, but the Bass Traveler has a two-level gain switch to boost the signal level, so the sound is always crisp and clear. It is ideal for use with virtually all headphones from 16-100 ohms, so you can get full performance out of your top-notch brand or just get more bass in your earbuds.

A rotary on/off/volume control makes it easy to operate. The long-lasting built-in rechargeable lithium polymer battery provides several hours of uninterrupted listening enjoyment. There is an LED indicator for power on, low battery, and battery charge, and re-charging is done through the convenient micro-USB port.

 

Frequently Asked Questions

 

Why would I need a headphone amplifier?

Headphone amplifiers can be great for anyone looking to get the most out of their favorite pair of headphones and improve their overall listening experience.

Cell phones, tablets and other listening devices these days may sound ok for general use, but could be lacking in overall response. A good headphone amplifier can improve the frequency response, clarity and add a much needed volume boost for high impedance headphones. They can also help in loud environments where it may be necessary to turn the headphone volume up more than normal like playing drums to a backing track.

In addition, the Bass Traveler also features a second headphone output that can be used to split the signal to a second pair of headphones for a second listener.

What is impedance?

To avoid getting too technical, impedance in this case is the resistance your headphones apply to the incoming audio signal.

Picture a garden hose with water flowing through it. When you bend the hose, you are resisting the flow of water and therefore adding impedance. In order to get the same amount of water to flow out the end of the hose, you'll need to increase the water flow. The same applies to your audio signal. Impedance in an audio signal is measured in Ohms. The higher the ohms, the higher the impedance or resistance level.

Headphones come in a variety of different impedance levels to combat the large variety of ways in which we listen to music these days. Headphones with a lower impedance level are typically consumer style models like iphone earbuds (about 23 ohms). These work best with devices with weaker amplification systems like your iphone or tablet. Because of the lack of resistance, the iphone or tablet won't need to work very hard to push the signal through to your headphones.

On the other end of the spectrum, headphones with a higher impedance (over 50 ohms) are better suited for use with stronger amplifiers, most commonly found in professional audio or stereo equipment. If you use a pair of high impedance headphones with your iphone, you may find them lacking in volume level, frequency response or clarity.

This is where the Bass Traveler comes in and gives your headphones the extra boost they need to operate at their best. The Bass Traveler will support headphones with impedance from 16 ohms all the way up to 100 ohms.

How long does the battery last and how can I charge it?

The Bass Traveler should be charged initially for about 2 hours before its first use. After that, the battery should last about 6-8 hours on a full charge and will only take about an hour to charge back up again. The light on the Bass Traveler will flash to indicate a low battery charge and should be plugged in to charge again as soon as possible.

The Bass Traveler will include a USB to USB micro cable to plug the unit into a USB wall charger or free USB port on your computer for charging. Your computer will need to be turned on or providing power to its USB ports in order to charge the Bass Traveler. The light on the unit will turn purple to indicate it is charging and turn blue again once it is finished.

You can continue to use the device while it is plugged in.

Can I play audio over USB?

The Bass Traveler will not accept any audio signal via USB, only the 1/8" (3.5mm) input. This allows the device to work with virtually any modern music listening device with a headphone port. You can, however, continue to use the Bass Traveler while it is plugged into a USB port and charging.

What does the Boost switch do?

The Boost switch is a pre-set bass boost EQ that can be switched to off (flat), a slight increase (M), or a max increase (H). This can be helpful for headphones with a limited bass response or for users that just need that extra boost in the low end.

 

Further Technical Support

Whether you are a customer or dealer, if you already own an M-Audio product, or if you just have pre-sales questions, the M-Audio technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support. 

•  M-Audio Support Contact 

 

Technical Specs

• Maximum Output Power: Approximately 250 mW (16 Ω)
• Maximum Drive Ability: 16–150Ω
• Signal-to-Noise Ratio: > 90 dB (A-weighted)
• Connections:
  • 1/8” TRRS outputs;
  • 1/8” TRRS input;
  • micro-USB port
• Power: Internal lithium-polymer battery with 8-hour capacity
• Dimensions(width x depth x height): 1.84” x 1.80” x 0.60”
• Weight: 0.07 lbs. (1.12 oz.)

 

Box Contents

• Bass Traveler
• Micro-USB cable
• 1/8” TRRS connector cable
• User Guide.

• Ultra-portable headphone amplifier with two 1/8-inch headphone jacks conveniently transforms audio components with one headphone output into a two output audio source
• Compatible with high-quality, high-impedance (from 16-100 ohms) headphones courtesy of a conveniently located level gain switch to boost the signal level; a guarantee the sound is always crisp and clear.
• Long-lasting (approx. 8 hours) rechargeable Lithium polymer battery for long journeys, multimedia work or portable recording scenarios; universal Micro USB port for battery charging
• Bright LED indicator for power on, battery charge and low battery warnings.
• Universal connection to virtually all audio equipment with a 1/8-inch output connector courtesy of 1/8-inch (3.5mm) stereo input jack

User questions & answers

Question:	How many watts
Answer:	Hi, M-Audio support here! Yes, the supplied software (Pro Tools | First M-Audio Edition) will allow you to import your audio files and record your voice on a separate channel, then mix it together!
Question:	I have hearing loss, would this boost the volume louder for me to hear better
Answer:	The opening at the mouth is just under 1.5 inches wide
Question:	Does the amplifier work when charging
Answer:	The glass bottles would fit in the holders,, but they wouldn't fit snuggly.
Question:	does it work well with the audio technica ath m50x headphones
Answer:	Yes it is common for these types of hats to foam up. You can fix it by finding any kinks in the straw and try to straighten them, or let your drink go a little flat to fix it. Hope this helps!

Product features

Music’s Better Shared

Share your sound and transform your MP3 player, phone or tablet into a two-output device with M-Audio’s ultra-portable battery powered headphone amplifier, Bass Traveler.

Featuring two conveniently located 1/8-inch headphone outputs and one 1/8-inch stereo input jack, Bass Traveler seamlessly connects to virtually all personal listing devices, enhancing the source audio without the signal degradation often experienced using conventional splitters.

Built-In Battery

Whether you’re at home or on the go, Bass Traveler’s built-in, long-lasting lithium-ion battery provides up to 8 hours of uninterrupted listening enjoyment.

With the inclusion of a LED power indicator you can be certain of your current charge level, low battery warnings and charging status. Recharging the battery is a breeze courtesy of a convenient micro USB port for seamless connection to a USB power adapter or standard computer USB port.

Superior Sound

Bass Traveler guarantees you experience your music collection as it was always intended to be heard. The sound quality from the typical headphone jack on a portable device or coming from the standard-issue soundcard found in virtually every computer leaves a lot to be desired.

Bass Traveler delivers a marked upgrade in sound quality, compared to just plugging your headphones directly into your unit’s headphone jack.

Compatibility Covered

Getting the best out of your headphones couldn’t be simpler thanks to Bass Traveler’s on-board selectable 2-position boost switch.

Many personal digital music players have a limited output for driving high-quality headphones-which may have a higher impedance, a lower pass band voltage sensitivity or both-but Bass Traveler’s innovative 2-level gain switch seamlessly boosts the signal level, guaranteeing crisp and clear sound output.

Features

- Ultra-portable headphone amplifier with two 1/8-inch headphone jacks conveniently transforms audio components with one headphone output into a two output audio source

- Compatible with high-quality, high-impedance (from 16-100 ohms) headphones courtesy of a conveniently located level gain switch to boost the signal level; a assure the sound is always crisp and clear.

- Long-lasting (approx. 8 hours) rechargeable Lithium polymer battery for long journeys, multimedia work or portable recording scenarios; universal Micro USB port for battery charging.

- Bright LED indicator for power on, battery charge and low battery warnings.

- Conveniently located rotary multi-control for on, off and volume control.

- Universal connection to virtually all audio equipment with a 1/8-inch output connector courtesy of 1/8-inch (3.5mm) stereo input jack.

Product description

Perfect companion to any PC-based recording system / Two XLR microphone inputs / Two 1/4-inch electric guitar inputs

• 2 channel mic/instrument preamp
• XLR mic ins; 1/4" instrument ins; balanced 1/4" outs
• phantom power
• ultra compact
• Ultra-quiet 2-channel preamp Each channel offers individually adjustable gain Balanced XLR with phantom power
• Preamplifier

User questions & answers

Question:	How do you connect this audio buddy to your computer
Answer:	it would connect to your computer's audio input, with an 8th inch min plug (same size as a mini headphone cable)
Question:	Are the 2 outputs stereo or 2 mono outputs? I am looking to split between a recorder and speakers. If both are stereo, that won't be needed
Answer:	It's been a while since I've used mine, but I want to say they're both mono.
Question:	Can I use a behringer line 2 usb wire to connect to the two outputs and into my computer
Answer:	It has worked with the Edirol UA-1X USB interface, just note you choose 1 or the other, It may or may not work with both at the same time per the design

Product description

command the power of your studio with 24-bit quality! professional monitoring hear every detail in the crystal clear clarity you demand. The air hub features 24-bit/ 96kHz resolution so you can be certain you’re hearing every subtle nuance of you mix. unite your USB GEAR made to move Usb-c ready&nba; air hub truly is ready for any situation, in seamless connectivity to your Mac or PC with its high speed USB connectivity with USB and USB-C connection cables included premium software suite included .

• Hear every detail - USB monitoring Hub for Mac and PC with 24-bit/96kHz resolution for professional monitoring and hearing every subtle nuance of you mix; includes both standard USB and USB-C connection cables
• Connectivity covered - connect all your gear with stereo ¼” Outs and a ¼” headphone out with independent level control
• Unite all your USB gear - 3 USB ports for connecting any USB devices Including USB MIDI controllers, external hard drives and thumb drives
• Perfect for studio or stage - compact, ultra-portable footprint, rugged metal chassis and large central control for easy volume adjustment
• Premium software suite included - Pro Tools | first M-Audio Edition, eleven Lite, the avid effects Collection, expand! 2 from air music Tech and 2GB of touch loops content

User questions & answers

Question:	will this connect my guitar to fl studio
Answer:	M-Audio support here! Software will be included even if it's used. If you have any other questions, please feel free to call or email us using the contact information on maudio.com/support.
Question:	Will this system work as playback to studio monitors with Avid Media Composer software
Answer:	Hi, M-Audio support here! This microphone will capture audio in 16-bit with a sample rate up to 48000 Hz
Question:	Will the software work with other intersface
Answer:	No. I returned this device. Didn't like it at all. Still use Shure SMB7
Question:	Works Good if I want it to record my bass guitar
Answer:	I use the pop filter sold on Amazon by PEMOTech for $9.99. (The first part of the product title on Amazon is, "Pop Filter,PEMOTech Upgraded Three Layers Metal Mesh & Foam & Etamine Layer Microphone Windscreen Cover Handheld Mic Shield Mask"). It IS a tight fit and I struggled a bit to get it on, but with a pair of tweezers I was able to get it in place and it hasn't budged since.

Product features

Command the power of your studio with 24-bit quality!

Looking for the ideal high-quality audio interface monitoring hub? Here it is: AIR|Hub is a USB hub with two balanced ¼-inch TRS audio outputs, controlled by a large, solid-feeling metal rotary level knob. There are three USB inputs and a ¼-inch headphone jack with level control for private listening. The AIR|Hub is the ideal way to unite your VI control and audio output in one sleek, all-metal, space-saving solution.

Premium Software Suite Included

The AIR|Hub comes complete with everything to get you started including Pro Tools | First M-Audio Edition, the Avid Effects Collection, Eleven Lite, Xpand!2 from AIR Music Tech and a 2GB Touch Loops Loop package so you can add world-class-sounding instruments, samples and FX to your songs with ease.

Product description

db33, strike, hybrid 3 and boom from air music Tech. crystal preamps, & premium components; pristine ad converters versatile connectivity; flexible routing Usb-c ready&nba; premium components; hear the performance Now - not a second later unite your MIDI gear make this interface the beating core of your studio! 5-Pin MIDI in and out connections are included for connecting synths, sequencers and other external MIDI gear. Frequency Response: 20 Hz – 20 kHz (+/-0.2 dB).

• Capture every detail - premium component selection and 24-bit/192kHz resolution for professional recording and monitoring to your Mac/ PC;
• Low latency - Hi-Speed USB/ USB-C circuitry gives you the fastest connection, with a class-leading round trip latency of only 2. 59Ms*; USB and USB-C connection cables included
• Pristine studio grade capture - transparent crystal preamps and ultra-pristine ad converters for unsurpassed audio recording quality
• Connectivity - 4 XLR+¼" TRS combo inputs, 2 ¼” instrument inputs and 2 ¼” Line inputs; stereo ¼” outputs with direct mono/stereo switch; 2 ¼” assignable auxiliary Outs; 2 ¼” headphone outputs
• Unite your MIDI gear - 5-pin MIDI in/ out connections for connecting synths, sequencers and other external MIDI gear

User questions & answers

Question:	Is it ever in stock? been waiting for a month now with it ordered an i keep getting a different arrival time.. is it worth the wait
Answer:	Yes. I too received different delivery dates. It arrived as soon as it was in stock. It is worth the wait.
Question:	will it still work if it connects from a usb c to a macbook that has usb c connection?, will it work the same with a usb c/usb c cable
Answer:	It will you can even use adapters to change its connection to usb or thunderbolt
Question:	Is this compatible with the Macbook Pro M1 processor
Answer:	Yep
Question:	Hi, can i use this with fl studio
Answer:	Hi, M-Audio support here! Thanks for your question. I can confirm the AIR 192|4 interface in this package will be suitable as an audio interface for FL Studio! I hope this helps and If you have any further questions, please feel free to contact us directly - [email protected] Thanks, Krishan

Product features

Conquer Any Recording Session With Professional Studio Quality And Features!

With the AIR 192|14, you can create 24-bit/192kHz studio-quality recordings with an intuitive and easy-to-use audio interface. It features XLR+¼” TRS combo inputs, ¼” line inputs, all-new ¼” instrument inputs, a stereo pair of ¼” main outputs, and ¼” assignable outputs. The overall combination of professional audio performance, easy-to-use features, and the included AIR Series software bundle make the AIR 192|14 an amazingly versatile, high-performance audio interface!

Premium Software Suite Included

The AIR 192|14 comes complete with a software package that has everything to get you started including Pro Tools | First M-Audio Edition, Ableton Live Lite, Eleven Lite, the Avid Effect Collection, AIR’s Creative FX Collection, 2GB of sample content from Touch Loops, Xpand!2, Mini Grand, Vacuum, DB-33, Strike, Hybrid 3 and BOOM from AIR Music Tech.

Product description

M Audio’s new Hammer 88 is an affordable, fully weighted, hammer action keyboard for professional and semi pro players or students looking for a realistic grand piano feel to use with virtual instruments or sound modules. 

It features fully assignable MIDI buttons, pitch bend and modulation wheels, sustain pedal, secondary pedal and expression pedal inputs—while providing a clean aesthetic for players more concerned with compositional accuracy than editing and tweaking. 

Hammer 88 is USB powered, class compliant, and supports USB MIDI connectivity. Plus, Hammer 88 supports iOS connectivity with the Apple iPad Camera Connection Kit (sold separately), enabling you to perform and compose with audio apps on your iPad and other iOS devices. Please note that when you press a key on the keyboa rd, you will not hear any sound. This is because pressing a key causes the keyboard to send out MIDI data. MIDI data gives instructions on how a sound should play, but in order to actually hear that sound you need to configure your music software to read the MIDI data being sent from the Hammer 88 and play the sound back accordingly

 

Tech Specs:

• Dimensions: 11.88 x 5 x 55.
• Weight: 38.6 lbs

 

Included Software:

• Ableton Live Lite 9
• Sonivox Eighty Eight Ensemble
• AIR Mini Grand
• AIR Velvet
• AIR DB 33
• Skoove

 

System Requirements:

• PC: Windows 7 or later
• Mac: OS X 10.8 or later
• Available USB Port

 

Product Package Contents:

• Hammer 88
• Music Rest
• Ableton Live Lite 9
• Sonivox Eighty Eight Ensemble
• AIR Mini Grand
• AIR Velvet
• AIR DB 33
• Skoove

• 88 fully weighted, hammer action velocity sensitive keys deliver natural piano feel, faithfully replicating every subtle nuance of your performance
• Driverless class compliant and USB powered specification provides seamless USB midi connection for playing virtual instruments, controlling recording software and more
• Conveniently located pitch bend, modulation, volume and octave controls for immersive, expressive performances
• Expanded control options for inputs for sustain, expression and soft pedals included
• Includes free 3 month subscription to Skoove; The easiest way to learn piano with interactive piano lessons for beginners and advanced players
• Comprehensive performance software package for MAC and PC included; air “mini grand” acoustic grand piano, air “velvet” vintage electric piano instrument, air “db 33” tonewheel organ simulator and sonivox “eighty eight ensemble” authentic piano instrument
• Dual keyboard zones for layering, splits and 4-note chords with a single key press. Clean, professional editing with included Hammer 88 Controller Editor.

User questions & answers

Question:	Does the Hammer 88 have screw connections on the bottom to secure to a stand
Answer:	I've had my casio for over a year now and have had no problems with the keys. I like the piano very much.
Question:	Would some who studied classical piano for many years be happy with the action as practice keyboard? Most I’ve tried are too spongey weird weighting
Answer:	I connect my WK660 to my computer via usb cable, and immediately it is recognized by Windows. I use FL Studio, so I just go to MIDI settings and select Casio in the list for output/input MIDI. Thats it. THen I can use my KW660 as a MIDI controller
Question:	When the controller is placed on a desk, what is the height (precisely measured if possible) from the desk surface to the top of the white keys
Answer:	It has piano-style keys but they are not weighted.
Question:	Are the keys full sized, like a real piano keyboard, or are they smaller, like many other keyboards
Answer:	No, it does not. The only way to add voice would be to plug in to an external amp/speaker that also had a microphone. The external device would also need an output to a recording device.

Product features

This One's For The Player!

Introducing Hammer 88, a premium, no-compromize keyboard controller, ideal for professional, semi-pro players or students seeking the realistic grand piano feel to use with virtual instruments or sound modules. At the heart of Hammer 88 are 88 velocity-sensitive, fully-weighted hammer-action keys that are assured to faithfully capture every subtle nuance of your performance, while providing the unmatched response of a traditional grand piano-classic feel fused with the unrivalled sonic capabilities of virtual instruments. It's the perfect combination for performers and producers to experience their plugin collection like never before.

Expressive

Put expression center-stage with Hammer 88, thanks to a core range of controls, thoughtfully positioned to complement and enhance your performance. With a unity-locking pitch wheel and a separate modulation wheel, add portamento and glissando effects, or map the Mod-Wheel to any assignable parameter in your virtual instrument collection to reshape and evolve your sound on the fly. With the dedicated Master Volume Fader, you can instantly control the intensity of your performance or MIDI map this to any compatible parameter in your DAW or virtual instrument collection for expanded, hands-on control. Use the assignable Up and Down buttons to select different programmes, effects, MMC messages, jump between octaves and more.

Outboard Control

Don't limit yourself to your computer-based virtual instruments! Take control of your studio equipment with Hammer 88.

With its conveniently-located 5-pin MIDI Output, you can send all MIDI information to any compatible peripheral device, including hardware synthesizers, sound modules and drum machines.

With Hammer 88, it's easy to get the most out of your external sound generators. This is a controller designed from the ground up to place you firmly in the driver's seat.

Seamless Integration

An instrument shouldn't limit your creativity, it should enhance it! Hammer 88 is USB-powered, class-compliant and supports USB-MIDI connectivity for rapid, hassle-free setup that lets you focus on what's important - your performance.

Plus for iOS enthusiasts, Hammer 88 supports seamless connectivity with the Apple iPad Camera Connection Kit (sold separately), enabling you to perform and compose with audio apps on your iPad and other iOS devices.

Skoove - 3 Month Subscription included

Have you always wanted to learn how to play the piano or improve your playing? You’re in the right place! With Skoove, you learn how to play piano with hundreds of interactive, high-quality online piano lessons for beginner, intermediate, and advanced players. Skoove's unique method guides you with real-time feedback as you play, letting you improve faster and learn everything you need to become a complete piano player. All you need is a piano or keyboard, and a computer, iPad or iPhone connected to internet – no cables required!

In-Demand Sound Content From Touch Loops

Spark that initial idea or add the finishing touch to your latest masterpiece - whatever your production demands, Touch Loops' 2GB sample library doesn't disappoint! Now included with Hammer 88, this 500+ sound library provides everything from must-have one shot drum hits to sultry melodic loops and deep, driving bass - whatever your project demands, this expertly curated sample content arms you with cutting-edge content to realize it!

Software Included

ProTools | First | M-Audio Edition - Based on the same music creation and audio production tools that artists, musicians, producers, engineers, and mixers rely on every day.

Eleven Lite - The Ultimate plugin for in-demand guitar amp & cab modeling

Ableton Live Lite - Produce, Perform Create - edit your musical ideas in a seamless audio/MIDI environment.

Velvet - Combines five legendary electric pianos from the 60s and 70s into one versatile instrument.

Eighty Eight Ensemble - Add an exceptional recreation of the Steinway 9-foot CD 327 grand piano to your productions

Xpand!2 - Premium multitimbral workstation offering four active sound slots, or parts, per patch.

Mini-Grand - Virtual piano instrument with seven different acoustic piano sounds

DB-33 - A premium virtual instrument that recreates the sounds and controllability of classic tonewheel organs.

Product description

Pure Player Experience Enter the world of unrestricted computer-based music creation and performance with the Keystation 49 MK3 keyboard controller from M-Audio - successor to the iconic Keystation 49 II. Keystation 49 MK3 is a full-featured, powerful MIDI keyboard controller engineered for sequencing music and playing virtual instruments on Mac or PC. At the heart of Keystation 49 MK3 is an all-new premium keybed delivering a superbly natural, player-centric response and 49 full-size velocity-sensitive keys that guarantee to faithfully capture every subtle nuance of your performance. For unrestricted access to the full keyboard range, Keystation 49 MK3 includes expertly-located octave range buttons – whether its lead lines, extended chords or sub-heavy bass-lines, Keystation 49 MK3 covers it all in a format that keeps you focused on what’s important – your performance Express Yourself Keystation 49 MK3 provides all the must-have tools to capture even the most immersive, expressive performances. With conveniently located, ergonomically-designed pitch and modulation wheels, take command of your virtual instruments adding portamento, vibrato or any parameter mapped to the modulation wheel for completely customized control. Looking to add some authentic piano style sustain? Keystation 49 MK3 also includes a 1/4” (6.3mm) sustain pedal input for use with an external control pedal, such as the SP2 (sold separately), for expanded expressive capability. Immersive DAW Control With Keystation 49 MK3, take the hassle out of computer-based production. Combining USB-power, class-compliancy and support for USB-MIDI connectivity, setup is a breeze granting producers and performers immediate access to the modern-world of music production. Thanks to easily-accessible play, stop and record controls and directional buttons, experience an unprecedented, enhanced recording workflow - play, perform and record with music software without the nuisance distraction of a mouse or trackpad. Plus, Keystation 49 MK3’s support for iOS connectivity - with the Apple iPad Camera Connection Kit (sold separately) – enables full-featured performance with audio apps on iPads and other iOS devices. Portable Performance Powerhouse Keystation 49 MK3 is the ideal solution for traveling musicians who require unrestricted command of music software when performing live or in mobile-recording scenarios. Combining a slim line, lightweight and ultra-portable footprint with a robust, road-ready build, Keystation 49 MK3 packs core controller functionality in a lightweight and durable package – plus with a mobile-friendly USB-bus power specification, taking your performance and production on the road without compromising critical keyboard controller functionality has never been easier. Premium Virtual Instrument Suite Your production demands nothing but the best That why our third generation of Keystation controllers come loaded with pro-grade virtual instruments from leading developer AIR Music Tech. From the contemporary Xpand 2, loaded with an ultra-intuitive UI and thousands of premium patches, to the sultry vintage e-piano sounds of Velvet and faithful piano tones of Mini Grand, you can be sure, whatever your performance demands, the Keystation MK3 Virtual Instrument series guarantees to meet all your expectations with immediate creative potential right-out-the-box Professional DAWs Discovering the centre of your creativity shouldn’t be a chore That’s why we include two industry leading platforms for you to choose from. Discover the world of Ableton Lite, the revolutionary music production solution that lets you spontaneously compose, record, remix, improvise and edit your musical ideas in a seamless audio/MIDI environment. Alternatively experience the production powerhouse that is ProTools | First | M-Audio Edition - A complete DAW based on the same music creation and audio production tools that award-winning artists, musicians, producers, engineers, and mixers rely on every day. In-Demand Sound Spark that initial idea or add the finishing touch to your latest masterpiece - whatever your production needs, Touch Loops' 2GB sample library doesn't disappoint Based in Los Angeles and London, Touch Loops equips customers with the most cutting-edge sound elements, instruments, hardware, and software recordings, expertly curated by a team of professional music producers and sound designers. Whatever your project needs, this expertly curated, 500+ sound library features all the must-have sounds modern musicians demand, arming you with cutting-edge content to realize your creative vision Hone Your Skills M-Audio’s Keystation MK3 Series makes it simple to develop your skills no matter what level you’re at with trail subscriptions for both Melodics and Skoove. With Skoove, learn how to play piano with hundreds of interactive, high-quality online piano lessons for beginner, intermediate, and advanced players. Skoove's unique method guides you with real-time feedback as you play, letting you improve faster and learn everything you need to become a complete piano player. Melodics fuses a user-friendly, intuitive and inspiring user interface, underpinned with unique adaptive learning, motivational mechanics and customized challenges, encouraging users to learn different techniques, concepts and genres - with each session, you’re building muscle memory, improving your technique and most importantly, mastering your controller.

• Ultimate Expression | 49 full size velocity sensitive keys provide a natural feel that captures every subtle nuance of your performance
• Total Control: Volume fader, transport and directional buttons for easy control of your software, plus ergonomically designed pitch and modulation wheels, Octave up and down buttons and sustain pedal input for expressive performances
• Immediate Creativity | Easy plug and play connection to your Mac or PC no drivers or power supply required; compatible with iOS devices via the Apple to USB Camera Adapter (sold separately)
• Your Studio Centerpiece: Compact design fits any desk, studio or stage setup perfectly and advanced functionality customizes your controls for your recording software
• Premium Software suite included | ProTools First, Ableton Live Lite, Eleven Lite, Velvet, Hybrid 3, Loom, Vacuum Pro, Eighty Eight Ensemble, XPand 2

User questions & answers

Question:	does the midi software (velvet, xpand, and mini grand) work as plugins with Ableton 9? As a vst? or are they stand alone
Answer:	They should work both ways
Question:	What kind of usb connector is needed to connect to an iPad with (lightning cable
Answer:	I wanted to connect my Yamaha p125 to my ipad and was told to buy that ridiculously expensive Apple Camera Adapter. Instead, I bought an Amazon Basics regular USB to iPad Pro USB adapter for around 10 bucks. Works the same and a whole lot cheaper. Don't believe me? Go to Sweetwater's website and look at the demo video using the Yamaha keyboard with the ipad Pro. You can see the same adapter.
Question:	Will this work with Mac Mojave
Answer:	This is from the M-Audio website FAQ's: Will the Keystation Mini 32 MK3 work with my Windows or Mac computer? Yes! The Keystation Mini 32 MK3 is a class-compliant device, which means that it's plug-and-play and does not require any drivers to be installed. This also means that it will work and is supported on the latest operating systems, including Windows 10 and Mac 10.14. The important take-away, for everyone, is this: "The Keystation Mini 32 MK3 is a class-compliant device".
Question:	Is the 49 key semi weighted as well
Answer:	I owned the Keystation 88 II, which has the semi-weighted feel. So, rather than guess at the answer to your question, I just checked the M-Audio website. Their description says that the Keystation 49 MK3 has a synth action. That type of action, typically, is a lighter spring feel than the semi-weighted feel. I actually liked the feel,of the 88 II. I owned two of them. One lasted four years. The second unit only one and a half years. I take particularly good care of my equipment. And don’t pound on the keys. However, they both failed far too soon, in my opinion. I have switched to the Nektar brand. Only time will tell about their durability. Good luck with your choice.

Product features

Pure Player Experience

Enter the world of unrestricted computer-based music creation and performance with the Keystation 49 MK3 keyboard controller from M-Audio.

Keystation 49 MK3 is a full-featured, powerful MIDI keyboard controller engineered for sequencing music and playing virtual instruments on Mac or PC.

Comprehensive Software Package Included

The Keystation 49 MK3 comes with a software package that has everything to get you started including Pro Tools | First M-Audio Edition, Ableton Live Lite, 2GB of sample content from Touch Loops, Xpand!2, Velvet, Mini Grand from AIR Music Tech.

M-Audio’s Keystation MK3 Series makes it simple to develop your skills no matter what level you’re at with trial subscriptions for both Melodics and Skoove.

Product description

The M-Audio BX5 D3 is the latest addition to the M-Audio BX family and the most powerful model to date. Optimised for a smooth and natural listening experience, these speakers are perfect for professionals, beginners, and everyone in between. With BX5 D3 Experience sound quality you can trust and discover premium, accurate and defined sound reproduction. Custom Class A/B analogue amplifiers with 100W of distributed power deliver superior dynamics and tonal accuracy across the frequency spectrum—while the woven Kevlar low-frequency drivers and computer optimised waveguide-loaded silk dome tweeters provide rich, defined sound. Plus, adapt BX5 D3 to your listening environment thanks to an on-board Acoustic Space Control that tailors the sound-output accurately to your studio space for optimum results. Whether you’re seeing a pro-grade monitoring upgrade or a trusted reference monitor, with the BX5 D3, you’ll enjoy the utmost accuracy you demand coupled with a fatigue-free, engaging listening experience.

• Professional class A/B bi-amplified design with 100 watts of distributed power for studio-grade cohesive, accurate sound and ultra-wide range 52-35kHz frequency response covers full musical spectrum
• Superior transparent sound quality: 5” low-frequency drivers with Kevlar cones for rich, defined lows and 1” high-frequency drivers with natural silk domes and computer optimised waveguides for smooth, clear highs
• Versatile, conveniently located XLR balanced and 1/4” balanced/unbalanced inputs for connecting mixers, amplifiers, instruments, DJ gear and more
• Acoustic Space Control customises the sound output to the listening environment for sonically-true, reassuringly-accurate sound reproduction
• Extended low-frequency response down to 52Hz courtesy of optimized rear ports that minimize air turbulence and acoustic distortion
• Position with precision courtesy of conveniently located pin-hole LEDs - they shine at their brightest when the speaker is positioned at the ideal monitor angle

User questions & answers

Question:	M-audio bx5 d3| compact 2-way 5" active studio the same price for 1 or 2 speakers
Answer:	No problem if the battery is always sufficient
Question:	So to control the volume for these speakers you have to reach to the back of them every time
Answer:	Up to 8 hours. According to the site.
Question:	Are they magnetically shielded
Answer:	Yes. Any sound that comes from your phone can come from the speaker, but it does need to be connected to your phone with Bluetooth. It doesn’t have Spotify on its own.
Question:	Does this product come with 2 speakers
Answer:	Hello Sir or Madam, We are glad to notify you we've worked hardly to solve the technical issue of Divoom APP for IOS devices. You will be accessible to the IOS APP through two methods: 1. Scan the QR code on the package; 2. Search for “DivPix” in Apple Store. For the Android Phone users through two methods: 1. Scan the QR code on the package; 2. Search for “Divoom” in Google Play Store. Sorry for the inconvenience we brought you during the past days. If any more questions, feel free to let us know via email: [email protected] Best regards, Divoom Customer Service

Product features

Sound Matters

A studio monitor is no ordinary loudspeaker. A true monitor must be unerringly accurate, with a flat frequency response and vanishingly low distortion. It has to tell you, the music producer dependably and unquestionably exactly what is or is not in your recording. Introducing M-Audio’s BX5-D3 monitors—the return of a studio icon and the successor to the industry-renowned BX-D2 monitors. Trusted by recording/mix engineers and composers globally, M-Audio’s BX monitors guarantee absolute surgical precision and repeatable engineering excellence - with M-Audio’s BX5-D3 studio reference monitors, listen with confidence.

Studio-Grade Drivers

A monitor’s drivers are the heart and soul of its performance. Driving the low-end and midrange, BX5-D3’s 5-inch military-grade Kevlar woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted 'cone breakup.

BX5-D3’s treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters. Together, the BX drivers deliver critical detail, nuance and dynamic accuracy, so your mixes have the veracity and transparency you demand.

Its all in the Enclosure

With M-Audio’s BX5-D3, every detail has been meticulously engineered with one goal in mind - to facilitate the freedom to mix with confidence. BX5-D3 monitors have a rear-mounted bass port, precision engineered to the exact length and diameter. The result? Deep, defined bass response with maximum bass extension and resolution. BX5-D3’s tweeter is mounted in a custom waveguide for reliably accurate dispersion that eliminates unwanted high-frequency 'scatter,' whilst ensuring a wide and stable soundstage. Finally, BX5-D3’s iconic 'fastenerless' design on the front panel, ensures so there are no driver attachment screw heads to interfere with the sound coming from our drivers.

Class A/B Bi-Amplified Power

Efficient and accurate: Driving the BX5-D3 monitors are two Class A/B internal amplifiers that power the woofer and tweeter separately - each optimized for the specific frequency range it handles and engineered to complement the characteristics of its companion driver. A precision-tuned crossover guarantees each driver only handles the frequencies that it produces most efficiently for a sound that is cohesive across the entire frequency spectrum. Play louder with less audible distortion: The BX5-D3 bi-amplified design is a far more efficient and accurate way to power a loudspeaker than using a single full-range amplifier to drive multiple driver elements.

Tailor Made Sound

At M-Audio, we understand no two listening spaces are the same. Negate problematic bass frequencies and limit the impact of nuisance standing waves thanks to BX5-D3’s special acoustic space control for precise adjustment of BX5-D3’s sound output in line with your studio space.

Connectivity Covered

Whatever you needs, the BX5-D3 Studio monitors guarantee to assimilate into your existing setup with ease. Combining conveniently-located, rear-mounted XLR and 1/4-inch balanced inputs, BX5-D3 connects to virtually all studio equipment including mixers, interfaces and more.

Find The Sweet Spot

When monitoring, it is critical to source the ideal listening position (or 'sweet spot') between the two speakers for an optimized stereo image. The BX5-D3’s front-mounted positioning LED shines brightly when you’re located in the perfect listening spot, for accurate and reliable mix evaluations.

Product description

Thanks to nearly a decade of continued innovation, the new Oxygen MKIV series controllers from M-Audio offer more control and deeper hardware/software integration than any of their predecessors. Each is powered by a USB connection to your computer and comes equipped with a reliable build that enables you to make music on the go or implement these controllers into any burgeoning studio.

M-Audio's Oxygen 61 MKIV features 61 velocity-sensitive keys for playing chords, bass lines, and melodies; eight assignable knobs for tweaking effect plugins and virtual instruments; eight velocity-sensitive pads for triggering samples or finger drumming; and 9 assignable faders that is ideal for controlling the master output and mixing tracks together.

It also has dedicated transport controls and track-up and track-down buttons that allow you to initiate play, stop, and record in the Digital Audio Workstations (DAW) environment right from your keyboard controller. The Oxygen 61 MKIV offers out-of-the-box integration with popular DAWs including Ableton Live, Pro Tools, Logic, Cubase, and many more.

The controls instantly map to key parameters in your favorite DAW, enabling you to immediately tweak the mixers, editors, and transport windows without splitting your attention.

Frequently Asked Questions

What software does the Oxygen Series come with?

All keyboards in the Oxygen (MKIV) series include download codes for Ableton Live Lite 9 and SONiVOX Twist - Spectral Morphing Synthesizer.

I do not have the authorization codes for my software. What do I do?

If your authorization code is lost or misplaced, contact M-Audio Technical Support by visiting m-audio.com/support for further assistance.

What operating systems are supported? Do I need to install any drivers?

The Oxygen (MKIV) series is class compliant, which means you don’t have to download or install any drivers. Being class compliant also means that the Oxygen (MKIV) series will run on all current and future operating systems for PC and Mac.

• Compact, ultra-portable performance keyboard controller with 61 full-size, synth-action velocity-sensitive keys and on-board pitch bend and modulation wheels for expressive performances
• 8 velocity-sensitive trigger pads for beat production and clip launching; 8 assignable knobs and 9 assignable faders for manipulating virtual instruments, DAW parameters and plugins - on-board LCD screen provides instant parameter feedback
• Dedicated octave up and down buttons increase the keyboard to the full melodic range and transport buttons let you control your DAW without reaching for the mouse
• Innovative DirectLink automatically maps controls to popular DAWs including Ableton Live, Pro Tools, Logic, Cubase and more
• Class compliant, plug-and-play functionality and USB powered specification for simple user-friendly setup
• Comprehensive production software package for Mac and PC worth over $100 included; Ableton Live Lite, SONiVOX Twist and AIR Music Tech Xpand!2

Product features

Premium Synth-Action Response

Your performance demands the right tools for the job. M-Audio's Oxygen 61 features a synth-action keybed with action that is adaptable, clean and precise. The natural profile keys are both velocity- and pressure-sensitive, for maximum expressive capability, guaranteeing to replicate every subtlety and nuance of your performance. With the inclusion of conveniently-located, Octave Up and Octave Down buttons, accessing the entire note range has never been easier - whether you're playing intricate melodic lines, chords or basslines, Oxygen 61 is the ideal, ultra-portable production and performance control solution.

Express Yourself

Oxygen 61 provides core in-demand tools to capture immersive, expressive performances. With conveniently located pitch-bend and Modulation wheels, take command of your virtual instruments adding portamento, vibrato or any parameter mapped to the modulation wheel for unprecedented customized control.

Plus, Oxygen 61 also includes a 1/4" (6.3mm) sustain pedal input for use with an external control pedal, such as the SP2 (sold separately), for added expressive capability and genuine piano-style sustain.

Core Production Control

Craft the perfect beat in seconds with Oxygen 61's 8 assignable backlit velocity sensitive drum pads, perfect for capturing every lifelike detail of your performance. For expanded creative possibilities, Oxygen 61's pads are fully assignable providing the ideal platform for triggering loops, clips, virtual instrument sounds and much more.

With the inclusion of eight fully-assignable knobs and 9 assignable faders, map Oxygen 61 to your workflow preference and take total-command of effect plugins, virtual instruments and mixer parameters for unprecedented tangible control of your production.

Take Command of Your DAW

Setting up a MIDI controller with your software doesn't get any easier than this. Oxygen 61 offers out-of-the-box integration with popular DAWs including Ableton Live, Pro Tools, Logic, Cubase, and many more. Using DirectLink, Oxygen 61's controls instantly map to key parameters in your favorite DAW, enabling you to immediately tweak the mixers, editors, and transport windows. Additionally, Oxygen 61 has built-in customizable mapping presets that quickly interface Oxygen 61 with your favorite effect plugins and virtual instruments. Plus, with the inclusion of conveniently located transport controls, initiate play, stop, and record functions in the DAW environment right from your keyboard controller for a workflow that focuses you on what's important - your production!

Premium Software Suite Included

ProTools | First | M-Audio Edition - Based on the same music creation and audio production tools that artists, musicians, producers, engineers, and mixers rely on every day.

Eleven Lite - The ultimate plugin for in-demand guitar amp & cab modelling.

Ableton Live Lite - Produce, perform create - edit your musical ideas in a seamless audio/MIDI environment.

Twist - Combining a dynamic interface, an advanced pattern generator, and onboard effects, Twist 2 is your toolkit for serious sound design using simple, time-saving controls.

Eighty Eight Ensemble - Add an exceptional recreation of the Steinway 9-foot CD 327 grand piano to your productions.

Xpand!2 - Premium multitimbral workstation offering four active sound slots, or parts, per patch.

Welcome to the World of VIP Music Software

Experience expanded control of your VST instrument and effect collection with Oxygen 61 MKIV and VIP3.1.

VIP3.1 provides you with unparalleled access to your virtual instrument and effect collection, seamlessly integrating the hardware / software experience and grants the unrestricted freedom to create in a user-friendly, intuitive format.

The combination of VIP and Oxygen 61 MKIV maximizes workflow and ensures a playing experience that feels natural and enhances creativity - the natural, tactile feel of hardware fused with the unrivaled processing capability of virtual Instruments.

In-Demand Sound Content From Touch Loops

Spark that initial idea or add the finishing touch to your latest masterpiece - whatever your production demands, Touch Loops' 2GB sample library doesn't disappoint!

Based in Los Angeles and London, Touch Loops equips customers with the most cutting-edge sound elements, instruments, hardware, and software recordings, expertly curated by a team of professional music producers and sound designers.

Now included with Oxygen 61, this 500+ sound library provides everything from must-have one shot drum hits to sultry melodic loops and deep, driving bass - whatever your project demands, this expertly curated sample content arms you with cutting-edge content to realize it!

Product description

Looking to add some piano style sustain to your keyboard or controller? The M Audio SP 2 is a traditionally styled, compact and sturdy sustain pedal specifically engineered with the modern musician and producer in mind. Featuring a conveniently located polarity switch, a heavy duty, natural feeling mechanism and an ultra-portable robust design aesthetic, M Audio's SP 2 universal sustain pedal is the ultimate accompaniment to your electronic keyboard, synthesiser, MIDI controller or drum machine.

• Universal sustain pedal with chrome foot pedal for a natural, realistic pedal action
• Classic design with a conveniently located polarity switch for compatibility with all electronic keyboards
• Premium build with a robust, heavy-duty mechanism for uncompromised reliability
• Lightweight, ultra-compact aesthetic provides classic piano style sustain in portable footprint
• Specially designed rubber pads located on the pedals underside grips the floor and stays put while you play

User questions & answers

Question:	Does this pedal work with all Korg keyboards
Answer:	The pedal has reversible polarity, so it will work with all keyboards.
Question:	Does this pedal have a gradient on the sensitivity for the sustain, OR is it an on/off sustain switch
Answer:	It appears this is a simple on/off switch pedal. For continuous or gradient performance the phrases to look for in sustain pedal description are "half-damper" or "half-pedaling." If there is no indication by the manufacturer of one of those descriptions, the pedal is just an on/off switch. If your digital piano or electronic keyboard supports half-damper, then a half-damper pedal varies the nature of the sustain effect based on how far down you depress the pedal. The only half-damper pedals I have found so are the Yamaha FC3A, Roland DP-10, and Korg DS1H. The half-damper effect emulates the action on an acoustic piano of lifting the felt damping pads only part way off of the strings.
Question:	Where is the cable of the pedal
Answer:	its permanently attached to the pedal.
Question:	For a while, my pedal sustained when NOT depressed, sort of a reverse functionality, which I actually appreciated...but can't replicate. Anyone else
Answer:	According to the FAQ on the manufacturer's web site (for the SP-Double and SP-Triple), ¨Are the pedals switchable? The pedals will not have a switch to change polarity and will operate as normally open. This means that the pedal will send a value of 0 when up and a value of 127 when pressed down all the way. Different manufacturers may program their keyboards to respond to the opposite (127 when up, 0 when down) and to combat this some pedals may come with a switch to change the polarity of the pedal to match that of the keyboard. Typically, though there are ways around this without the need for the switch.¨ (The article is on the manufacture's website at: http://m-audio.com/kb/article/1967 )

Product features

For Keyboard Players Who Want the Most Realistic Pedal Action

The SP-2 is a universal sustain pedal with polarity switch for compatibility with all electronic keyboards. Its classic design with rubber-coated shell and chrome foot pedal make it as attractive to the eye as it is comfortable for the foot. The M-Audio SP-2 Sustain Pedal is built around a heavy-duty mechanism that makes it long lasting and durable—perfect for the studio and the road.

Featuring the kind of soft resistance, a full-sized piano pedal gives, the SP-2 feels just like playing an acoustic piano. The give and take playback allow the musician to be confident that when they press the sustain pedal, the note lingers like it should. As soon as the musician lifts their foot, the note is gone. The SP-2 is as responsive as it needs to be.

Key Features

- Classic-style sustain pedal for use with any electronic keyboard

- Designed to work and feel just like acoustic piano’s sustain pedal

- Specially designed rubber bottom grips the floor while you play

- High-quality chrome foot pedal with expressive half-pedal capabilities

- Includes 6-foot cable with 1/4-inch jack

Product description

The Uber Mic is the perfect set-up for all your recording needs— whether it’s recording acoustic instruments and vocals, doing podcasts and broadcasting, or simply bringing your gaming experience to the next level. Uber Mic does it all. The condenser microphone ensures studio-quality recording with a choice of four polar patterns, so you can customize the recording to your exact needs. There’s a 1/8-inch headphone jack with internal headphone amplifier so you can connect the headphones of your choice and hear everything in pristine detail. The USB/direct mixing control with mic volume enables zero- latency recording and monitoring, so you’ll hear exactly what you’re recording in real time, a huge “must have” compared to lesser products.

• Easy, intuitive operation for any application and wide-range 30–20,000Hz frequency response delivers detailed, natural sound
• 3-capsule condenser microphone element, including single-point stereo, with 4 selectable polar patterns to customize your ideal recording (Polar patterns: cardioid, figure-8, omnidirectional, and stereo)
• Conveniently located ⅛” headphone jack with internal headphone amplifier for private listening / monitoring
• USB/direct mixing control with mic volume control enables zero-latency recording and monitoring
• Microphone mute control ensures privacy and radiant LCD display shows polar pattern and currently selected control level
• Convenient desktop mounting with threaded insert for optional stand-mounting fits easily into any setup

User questions & answers

Question:	Does the used m-audio uber mic comes with the software as well
Answer:	Highly unlikely. As driver support for that version of windows has stopped completely from microsoft itself. If it is going to work i think you would have quite the task ahead of you in order for it to work.
Question:	What are the sampling rate and bits
Answer:	M-Audio support here! Since the Amplitube 4 utilizes audio sources from sound cards or audio interfaces, it will work fine with the 2X2. If you have any other questions, please feel free to email me directly at [email protected].
Question:	Is this better than vocal studio
Answer:	M-Audio support here! Although we only support Windows and Mac operating systems with this interface, it is class compliant so it may work properly on an Ubuntu system. If you have any other questions, please feel free to email me directly at [email protected].
Question:	Can I install a pop filter on the base of the microphone if I install the extra piece that comes with it
Answer:	Hi Shadow HR,M-Audio support here! We don't anticipate the M-Track 2x2 being unsupported for some time. This is our most recent audio interface in our line, and the products that no longer have driver updates are items that were designed by AVID when they owned M-Audio. I hope this helps, but if you have any other questions, I'd love to answer them. Please feel free to email me directly at [email protected].

Product features

Recording Simplified

Uber Mic is the perfect set-up for all your recording needs—whether it’s recording acoustic instruments & vocals, capturing pristine audio for podcasts & broadcasting, or simply bringing your gaming experience to the next level. Featuring a dedicated stand for ultra-convenient desktop mounting, plus a threaded insert for optional stand-mounting, Uber Mic is versatile, full-featured and sonically impressive. Whatever your recording needs, Uber Mic does it all – start recording, streaming & broadcasting .

Jack of All Trades

M-Audio’s Uber Mic features a large-diaphragm 3-capsule condenser microphone, perfect for podcasting applications or capturing high-quality audio from vocalists, instruments, percussion and more. With a choice of four polar patterns including cardioid, omnidirectional, figure-8 and single point stereo, Uber Mic is primed for virtually any recording scenario.

Studio Grade Sound

Whatever your recording requirements, Uber Mic guarantees premium studio-grade capture every time. Fusing pristine A/D converters that provide 16-bit resolution digital audio, your recordings will exhibit exceptional dynamic range that capture every nuance and subtlety of your performance. When combined with a wide range 30-20,000Hz frequency response and sample rates of up to 48kHz, you can be sure your recordings are completely clear and true to the original source.

Tactile Control

Uber Mic’s assortment of hardware controls and thoughtful connectivity options guarantee professional, hassle-free capture every time. Troublesome latency issues are a thing of the past, thanks to a conveniently-located dedicated USB/direct mixing control and a microphone volume control. A microphone mute control and 1/8-inch headphone jack with internal headphone amplifier lets you record in privacy. Take total control of your recording and make precise adjustments to your currently-selected level and polar pattern configuration with the crisp on-board LCD display.

M-Audio Uber Mic

Product description

Micro DAC is a USB digital-to-analog (DAC) converter with two outputs, one analog and one digital (optical).

It's ideal for converting the audio from your computer into a high-quality analog format without needing to carry anything larger than a flash drive.

The sound quality available from the typical headphone jack on a portable device or coming from the standard-issue soundcard found in virtually every computer leaves a lot to be desired. Micro DAC delivers a marked upgrade in sound quality, compared to just plugging your headphones directly into your unit's headphone jack. Use the 1/8-inch analog output to connect any headphones, and enjoy vibrant high-fidelity sound. There is a gain switch that boosts the signal level, so you can drive even high-impedance headphones to a robust loudness level.

And since virtually all high-quality audio equipment has an optical digital input, Micro DAC's optical digital output is perfect for driving that equipment with a pure digital signal - especially valuable since most computers to not have a digital output.

Micro DAC has a rugged aluminum housing and is USB-bus-powered.

Getting professional-quality audio from your computer couldn't be easier!

 

Frequently Asked Questions

 

Does the Micro DAC require any drivers?

The Micro DAC is class compliant with both Mac and Windows operating systems, meaning it does not require any additional drivers. Class-compliant devices are designed to use standard drivers that are built into the Mac and Windows OS. This makes the device quick and easy to setup.

 

How do I set this up on Mac/Windows?

Because the Micro DAC is class compliant, setting it up is as easy as selecting it as your playback device in your systems Sound Preferences. Here's a quick way to do that:

Windows

• Navigate to your Control Panel
• Select Sound
• Under the Playback tab, find the device labeled USB Audio DAC
• Click the Set Default button at the bottom of the window to select it as your playback device
• HitOK to exit the window
• Navigate to your System Preferences
• Select Sound
• Pick the Output tab at the top of your sound window
• Find and select USB Audio DAC from the list of available output

 Mac

Alternatively on a Mac, you can also hold down the Option key and click on the speaker icon at the top right of your screen to select your input and output devices.

 

How do I adjust the volume?

The Micro DAC will be essentially replacing the sound card in your computer, so the volume will be adjusted the same way you would adjust volume when using the headphone output or built in speakers on your computer. Some laptops and computers will have volume up or down buttons available on the keyboard, but otherwise this can normally be adjusted by clicking on the speaker icon in the top right of your screen (Mac) or bottom right of your screen (windows) and using the slider to adjust the output volume.

 

What is the impedance switch for?

The impedance switch is used to adjust the output volume to compensate for headphones with high or low impedance values.

When referring to headphones, impedance is essentially the amount of resistance being applied to the incoming audio signal. So, headphones with a higher impedance value require more power in order to provide the same amount of volume as a pair of low impedance headphones.

For example, imagine a garden hose with a nozzle on the end. When the nozzle is mostly closed, you are applying resistance to the flow of water (impedance), and less water is able to flow through the hose. But if you turn up the flow of water, you can increase the amount of water that is able to flow through that point.

It's important to understand impedance in order to properly use the device with your headphones. Using the low impedance setting with high impedance headphones will result in low volume and possible some noise or hiss. Adversely, using low impedance headphones with the high impedance setting could cause distortion, overload, and potentially damage the headphones.

Low impedance headphones are much more common and consumer grade (apple earbuds), whereas high impedance headphones are professional grade. If you are unsure of the impedance value of your headphones, check with the manufacturer. Low impedance headphones are typically categorized by anything lower than 50 ohms (Ω) and high impedance is anything above 50 ohms (Ω).

 

What do I use the digital output for?

The Micro DAC includes a TS to RCA(S/PDIF) digital cable for use with a digital input on another device. This can be an easy solution to send the audio output of your computer to a stereo receiver with a digital coaxial or S/PDIF input.

It's important to note that although this does look like a common RCA cable, a connection type popular with most home stereo units, the signal is digital and not compatible with the standard AUX input on your stereo. This will require a specific digital input which will often be colored yellow and featured on it's own on the back of your receiver, TV or other device. Check with the manufacturer of your device to find out if it has any digital inputs for this use.

The digital output could also be used in a studio setup to send audio from one computer to a S/PDIF input on an audio interface or mixer.

 

What bit/sample rates will the Micro DAC support?

The Micro DAC will support up to a 16 bit/48 kHz bit/sample rate that will be adjustable from your computer's standard Sound Preferences. When using the digital output it's important to make sure that the sample rate matches the sample rate of the device to which you are sending the signal. Here is a quick way to change the operating sample rate of the Micro DAC:

Windows

• Navigate to your Control Panel
• Select Sound
• Under the Playback tab, find the device labeled USB Audio DAC and double click on it
• Find the Advanced tab
• Use the drop-down menu to select your desired sample rate
• Hit Apply and OK to exit
• Navigate to your Applications folder and the then your Utilities folder
• Find and open the Audio Midi Setup
• If you do not see a window appear, click on Window at the top of your screen and select Show Audio Devices
• Select the USB Audio DAC from the list on the left
• Use the Format drop-down menu to select a new sample rate

 Mac

• Navigate to your Applications folder and the then your Utilities folder
• Find and open the Audio Midi Setup
• If you do not see a window appear, click on Window at the top of your screen and select Show Audio Devices
• Select the USB Audio DAC from the list on the left
• Use the Format drop-down menu to select a new sample rate

 

Further Technical Support

Whether you are a customer or dealer, if you already own an M-Audio product, or if you just have pre-sales questions, the M-Audio technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.

•  M-Audio Support Contact 

 

Technical Specs

• Analog Outputs: 1/8” headphone
• Digital Outputs: coaxial
• Power: via USB connection
• Dimensions(width x depth x height): 2.8” x 0.9” x 0.4”
• Weight: 0.06 lbs

 

Box Contents

• Micro DAC
• USB extension cable
• Coaxial digital cable
• Carrying pouch
• User guide

• Rugged aluminum housing
• 1/8" headphone output and 1/8" optical digital output
• Gain switch to easily drive any headphone
• USB-bus-powered
• Professional audio quality

User questions & answers

Question:	Does the 192 version play lower resolution files also
Answer:	Hi, M-Audio support here! Thanks for your question. Our AIR|HUB interface does not feature any audio inputs however, this is achievable with our AIR 192|4 interface. I hope this helps and If you have any further questions, please feel free to contact us directly - [email protected] Thanks, Krishan
Question:	Has anyone tried this with an iphone or ipad using the usb adapter
Answer:	I'm using it with FCPX but it operates outside FCPX as an alternative audio output for my Mac. So all apps play out through this. It gives you balanced audio so none of that hum you get with unbalanced. If you're using a Mac it's virtually plug and play. With PCs you might need a driver. Its Pro-Tools friendly so my assumption is that would be that it would work with Avid. If you email the manufacturer they'll get back to you within a few days.
Question:	Does this increase sound volume over the standard headphone jack and soundcards from most laptops
Answer:	Hi, M-Audio support here! Thanks for your question. The software supplied with the AIR|HUB will be compatible with most other hardware and DAW's! Please note to check your system requirements and software support by visiting airmusictech.com - I hope this helps and If you have any further questions, please feel free to contact us directly - [email protected] Thanks, Krishan
Question:	Does this require drivers when using on a Mac with Sierra
Answer:	Hello, If you are trying to record an instrument, you can not plug an instrument cable or mic cable directly into this box. However if you have a mixer with a usb output, you could plug the mixer inter the AIR Hub. What the AIR hub does have is multiple usb ins and great 1/4 inch stereo outputs for speaker systems. The two volume knobs serve well for using headphones and speakers. So for Bass guitar you will need more than this box. Cheers, Chris

Product features

Mini USB Digital-to-Analog (DAC)

Ideal for converting the audio from your computer into a high-quality analog format, the M-Audio Micro DAC removes the need to carry anything larger than a flash drive to achieve next-gen sound!

16-bit/48 kHz Audio Conversion

Micro DAC delivers a marked upgrade in sound quality compared to just plugging your headphones directly into your unit’s headphone jack. Micro DAC delivers pro-quality 16-bit/48 kHz audio conversion.

Smart Inputs and Outputs

Use the 1/8-inch analog output to enjoy high-fidelity sound. The gain switch boosts the signal level for high-impedance headphones. Lastly, the digital output is for achieving a pure digital signal.

Features

Aluminum housing for ruggedness while traveling.

1/8" headphone output.

1/8" coaxial digital output.

Gain switch for high-impedance headphones, to easily drive any model.

Slim, small design for portability.

Minimum System Requirements:

M-Audio Family | M-Track 2X2 C-Series | 2-in/2-out USB Audio Interface (24-bit/192 kHz)

With the M-Audio M-Track 2X2, you can create flawless 24-bit/192 kHz studio-quality recordings with an intuitive and easy-to-use audio interface.

Boasting an elegant pro-grade metal chassis with a large central volume knob, the M-Track 2X2 features all-new transparent low-noise ‘Crystal’ pre-amps and pristine A/D converters that deliver the highest audio performance in its class.

M-Audio Family | M-Track Hub | USB Monitoring Interface with Built-In 3-Port Hub (24-bit/48 kHz)

M-Audio's M-Track Hub is a 3-port USB monitoring interface that is perfect for anyone who demands a high-quality audio interface monitoring hub.

It is a USB hub and has two balanced 1/4-inch TRS audio outputs, controlled by a large, solid-feeling metal rotary level knob with black-knurled rubber ring.

M-Audio Family | HDH50 | High-Definition Professional Studio Monitor Headphones

Building upon M-Audio’s world-class reference monitor technology, the HDH50 high-definition headphones bridge the gap between studio monitor engineering and private audio.

Incorporating premium audio components into a rugged, durable design, HDH50 delivers critical sound reproduction and audio isolation for use in professional recording and monitoring environments.

M-Audio Family | AV42 | 20-Watt Compact Studio Monitor Speakers with 4-inch Woofer (Pair)

The M-Audio AV32 and AV42 have custom-tuned cabinets, optimized speaker design, and advanced crossover technology deliver to the best sound you can get in monitors this size.

Product description

Before you buy a pedal, ask yourself this: do I know the polarity of my piano? You're probably thinking something like, "Yeah, sure I do — it's filed in my brain right between my social security number and my bank PIN." But seriously, this is important. Now, you could run off in search of your manual, or you could do yourself a favor and just buy an M-Audio SP-1 Sustain Pedal in the first place and save yourself the trouble. The SP-1 Sustain Pedal has a switchable polarity, so it will work with both your Yamaha and your Roland synth — no problem.

• Compact and sturdy sustain pedal for use with any electronic keyboard
• Designed for synthesizers, tone modules, and drum machines
• Ideal for applications that require non-latching momentary switches
• Plugs into 1/4-inch keyboard input; includes 5-foot cable
• Slick black styling; 1-year warranty

User questions & answers

Question:	Can i use this pedal to map to different parameters in my daw? thank you
Answer:	I also have energy 35 and the bow fits the case fine. The case is a little heavy but it work
Question:	Does this pedal have tip connectivity or ring connectivity
Answer:	Depending on your bow and how the quiver mounts to it, it can fit but may not. I have the five arrow tightspot on a bowtech reign 6. The case will close with the quiver attached but only if I remove two of the arrows and angle the bow. I usually take the quiver off rest it on the strings to secure and close the case. I've used all last year like that and never had any issues. I have been very pleased with the case. My favorite one I've ever had.
Question:	Can i use this pedal for yamaha ypg 235 piano
Answer:	I have a Bear Anarchy HD which is taller cam to cam. My draw length is 32" so I'm thinking most compound bows should fit.
Question:	Can I use this as a MIDI toggle for the record button in Ableton
Answer:	I can get it to hold my quiver without arrows in the quiver.