12 best guitar preamp

Product description

This time-proven outboard preamp features +/-20 db bass, mid, and treble controls plus an internal gain trimmer. The beltclip unit has been specifically designed for the frequencies of the acoustic guitar but it is also great for many other instruments. The Pure preamp features a special super wide band midrange filter, which is absolutely great in combination with the Pure pickups. It's simple and noiseless circuit provides unsurpassed clarity and power and the internal gain trimmer allows you to dial in the precise amplification factor needed for your instrument. Frequency response is 10-30000Hz. The bass control is set to roll of at 100Hz, the midrange at 1.5kHz with extra large bandwidth and the treble are set at 10kHz. Input impedance is 1 meg and the output is low ohmic. Battery life is about 180+ hours.

• Belt-clip Preamp for K&K and Other Pickups
• Includes Bass, Midrange, Treble and Volume Controls
• Works with Pure Western, Pure Classic, Pure Bass, Pure Archtop, etc.
• Also works with K&K The One, Big Twin, Big Shot, Bass Max, Violinissimo, etc.
• Add a Preamp to your K&K Pickup Without Modifying your Instrument!

User questions & answers

Question:	How is this in eliminating feedback in high volume situations? Not screaming speakers but loud ones
Answer:	No, in my experience, to get the wound e string you'd have to purchase it separately.
Question:	I have the k&k pure mini. if i purchase this preamp, do i also need a di with this? i'm sorry, i'm clueless. we have a sound board
Answer:	Yes, the ball end can be removed by slighly untwisting the string wire enough to release the all end; and then retwisting it back. this can be done using some small pliers , just use a light touch.
Question:	Will this work well with the pure mini pickup that has the condenser mic. Like with I be able to blend the mic and pickup
Answer:	Ball end
Question:	Can the preamp be used withoutmounting it to a belt. i perform live and switch repeatedfly between banjo and guitar
Answer:	Ball

Product description

This is a pre-amp unit, perfect for mounting directly into the side of your standard acoustic guitar or cigar box guitar.

For standard acoustic guitars, this Curve pre-amp gives you an on-board equalizer and volume control and helps boost and clarify the signal before it goes to your amplifier. For cigar box guitars, using a FLAT pre-amp is guaranteed to make your CBG sound better, compared to wiring a piezo straight to a jack.

The rod-style piezo can be built to go under the saddle on standard guitars, and can be built into a bridge or placed directly under the bridge for optimal vibrational pickup on cigar box guitars.



Specifications:

Flange measurements: 4 1/16" L x 1 3/4" W

Fits a hole of size: 3 3/4" L x 1 9/16" W

Presence Control: ±12dB at 8KHz

Bass Control: ±12dB at 600Hz

Middle Control: ±12dB at 600Hz

Treble Control: ±12dB at 2.2KHz

Input Impedance: 10MΩ

Frequency Response: 20Hz - 20KHz

Power: 9V alkaline battery (not included)

Pickup dimensions: 4 x 1.9 x 2.4inches



Package List:

1 * 4 Band EQ Equalizer

1 * End Pin Jack

4 * Mounting Screws

1 * Screw Cap



If you have any question please contact us, we will solve it for you quickly.

• Included rod-style piezo transducer pickup, attaches via small jack plug so it can be removed if desired
• Mono 1/4" jack with an automatic "off" circuit that turns the pre-amp off when the cord is unplugged
• Controls for volume, bass, mid-range, treble and pres,Built-in battery holder for 9-volt battery (not included)
• Can be easily fitted into your acoustic and cigar box guitars ,it is essential to electrify and amplify their sound

User questions & answers

Question:	Will this replace a Fender Classic 4 by Fishman
Answer:	No this will not work because of where it is positioned on the guitar if look at the fender classic it is flat square as apposed to this one whitch is arched this one is positioned on a curved section of the body where as the classic fits on a flat surface section. I hope this answers your question if you have any more inquiries feel free to ask me any time if i have an answer Ill give it if I don't I can find out fairly easily for you. Take care and good luck with the guitar I'm sure you figure it out and be jammin in no time.
Question:	does this unit come with everything pictured. I ordered this and did not receive the piezo or mounting screws
Answer:	I did not get screws either
Question:	does this work on a classical/spaniard
Answer:	YES,It works on a classical/spaniard.
Question:	I'm assuming this takes a 9v battery. Does polarity matter? Its not marked anywhere
Answer:	It does take a 9v battery and yes, polarity will matter.

Product description

Function knobs:

Gain: Adjusts the amount of Overdrive

Treble: Adjusts the Middle-High frequency

Bass: Adjusts the Low frequency

Volume: Adjusts the output volume of the pedal



Specifications:

Material: Zinc-aluminum alloy

Type : Preamp /Overdrive/ Boost

Control knobs: Gain, Treble, Bass, Volume

Input: 1/4" monaural Jack

Output: 1/4" monaural Jack

Item Size: 9.3 * 3.8 * 3.2cm / 3.7 * 1.5 * 1.3in

Item Weight: 155g / 5.5oz

Power Supply: DC 9V (Due to the shell material and volume, battery power cannot be installed inside. DC power supply)



Please note:

1. Due to the lighting effect, the color of the item shown in the picture may be a little different from the real one. It is just for your reference only.

2. The measurement allowed error is +/- 1cm.



Packing List:

1* Effect Pedal

• Mosky guitar effect pedal for guitar players.
• This item has three control knobs: Gain, Treble, Bass, Volume
• This item can help adjust the amount of Overdrive, the Middle-High frequency, the Low frequency and the output volume of the pedal.
• True bypass switch, 100% analog signal path, On/Off LED indicator
• Full metal shell and compact size, durable and portable.

User questions & answers

Question:	Can i plug this in my pa system and not have to use a guitar amplifier
Answer:	You can but I doubt that it would sound as good as being plugged in front of a real guitar amp.
Question:	Cual sería el adaptador que necesitaría comprar? Hay varias opciones y estoy confundido. Gracias por la ayuda
Answer:	Adapter DC9V with the current greater than or equal to 100MA is ok.
Question:	What power adapter do I need for this? Should list this in sales ad because a normal adapter will fry the pedal
Answer:	I own 5 Mosky pedals all of them work perfectly with a standard Boss-style center-negative 9V ac adapter. I have them powered with Gator brand power suppies, and I have them powered with Hiree brand supplies too. [ https://www.amazon.com/Hiree-Distributor-Isolated-PedalBoard-Instruments/dp/B07S68CXJD/ref=asc_df_B07S68CXJD/?tag=hyprod-20&linkCode=df0&hvadid=343211985571&hvpos=1o1&hvnetw=g&hvrand=1240167428061946348&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9007927&hvtargid=pla-781246477136&psc=1&tag=&ref=&adgrpid=73034475990&hvpone=&hvptwo=&hvadid=343211985571&hvpos=1o1&hvnetw=g&hvrand=1240167428061946348&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9007927&hvtargid=pla-781246477136 ] Standard 9v supplies work
Question:	Plugged this in and tried to use it. Couldn't seem to have any effect, any ideas? Knobs at max had no effect still
Answer:	I know this is a basic question, but did you have the cable running from the guitar plugged in and firmly seated in the input jack of the pedal and the cable that plugs into the output jack of the pedal (runs to your amplifier) also firmly seated in the output jack? It’s possible that if not firmly seated, you’ll still pass a signal to the amp but the signal is either not passing through the circuitry or (in the case of the input jack) the pedal circuitry is not energized because that’s the “on switch” as it were when the guitar cable is plugged all the way in; either scenario can occur in most pedals with a hard wired true bypass. I learned this the hard way 15-20 years ago.

Product description

NOTE :AC Adapter must be 9V DC, 100mA minimum, 2.2 mm plug with negative tip and positive sleeve. Acoustic Amp Modeler / Direct Recording Preamp/DI box

• Analog modeling acoustic guitar preamp/stompbox with DI recording output
• This BEHRINGER product has been designed to compete head to head with leading products on the market
• Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
• Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
• Super-high impedance to retain maximum signal integrity and dynamics

User questions & answers

Question:	Is the case metal, or plastic
Answer:	Metal Best sounding acoustic preamp for the money you can find I own 4 of them.
Question:	My unit isn't working with 9v batteries like it's supposed to. do i have to use a 9v power input or return the unit
Answer:	It should work with 9V batteries. They just don't last long. I recommend the wall wart for it. If it doesn't work at all with a 9V battery I would assume it's defective. I only use this power adapter: http://www.amazon.com/Behringer-PSU-SB-BEHRINGER-POWER-SUPPLY/dp/B000T9L7W2/ref=pd_bxgy_267_img_y
Question:	Would this pedal help eliminate feedback that occurs at higher volumes with Piezo pickups
Answer:	no, the pedal had the worst tone of any acoustic pedal i tried, save your money and step up to a Fishman Aura16 Acoustic Imaging Pedal, will sound better and help control feedback!!!
Question:	This thing only adds distortion to my acoustic guitar, no matter how I have it set. is it defective
Answer:	The one we bought has been working fine. We haven't experienced any distortion issues with our unit. Couple of things to try: make sure the battery is fresh or you are using a 9V power source; start with low gain settings and work up with tone controls centered; Try connecting the output of the ADI21 to the line-level input on your amp, you may be overdriving the microphone-level input on your amp; your guitar may be overdriving the input to the ADI21. If none of that helps nor the other six answers help, then I'd say it could be defective. --regards

Product features

ADI21

• Analog modeling acoustic guitar preamp/stompbox with DI recording output
• This Behringer product has been designed to compete head to head with leading products on the market
• Authentic tube/microphone modeling circuitry provides the natural warmth and presence, as if your acoustic guitar was miked through a tube pre-amp
• Ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezos
• Dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode

V-TONE ACOUSTIC DRIVER DI ADI21

For an unplugged sound that’s rich, loud and electrifying, step on the V-TONE ACOUSTIC DRIVER DI ADI21. This amazing little box is essential for piezo-equipped guitars and will make your acoustic guitar sound come to life! The ADI21 combines the features of an active DI (direct injection) box with our proprietary tube/mic emulation circuitry. Enjoy a full 3-band EQ with sweepable mids and a Blend control that allows you to mix the amount of amp and mic emulation you want with your direct signal. And if you prefer the “old-school” approach, just step on the switch and the ADI21 functions as a rather superb active DI box.

Great Sound, Naturally

By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. The BLEND control allows you to mix the amount of modeled tone with your instrument’s normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being mic’ed in the great outdoors.

EQ and More…

Armed with an onboard 3-band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1⁄4" TS or balanced gold-plated XLR connectors, which can be used to send a low-impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9 V battery or our PSU-SB DC power supply (not included).

Sound Value

Putting some acoustic glory into your recordings or live performances has never been this easy—or sounded this incredible. The ADI21 gives you a full DI, amp/microphone simulation and a 3-band EQ with sweepable mids – a lot of value in one little box! Try the V-TONE ACOUSTIC ADI21 at your local Behringer dealer and find out just how affordable great acoustic sound can be.

Product description

Features:

- These great little powered pre-amp units include all of the parts you need to add a pickup to your acoustic or cigar box guitar.

- The rod piezo offers great tone and pickup range, and is made to be mounted beneath the saddle of a standard acoustic guitar.

- It can be easily built into a cigar box guitar bridge as well, or mounted inside the instrument.

- These can be mounted into a guitar with no soldering necessary (though of course some cutting, drilling and other alterations would be needed).

- Please note that the plastic face is curved, so as to fit the curved side of a standard acoustic guitar.



Specifications:

Material: Plastic, Metal

Color: Black

Presence Control: ±12dB at 8KHz

Middle Control:±12dB at 600Hz

Treble Control:±12dB at 2.2KHz

Bass Control: ±12dB at 600Hz

Size: 10.2 x 4.5 x 6cm/ 4" x 1.8" x 2.4" (L*W*T)

Cable Length: 56cm/ 22"

2.5mm Plug Cable Length: 35cm/ 13.8"

Weight:132g



Package Content:

1 x Preamp Plus Pickup

1 x Connecting Wire with 2.5mm Plug Low battery indicator.



Note: Battery not included here.

• 🎸This EQ 7545R pick-up equalizer system with 4 bands can be easily fitted into your acoustic guitar and it is essential to electrify and amplify their sound.
• 🎸4 bands plus volume control, supplied with a battery box, connecting wire with 2.5mm plug included,Under the saddle pickup for acoustic guitar.
• 🎸Pre-wired for easy assembly, spend less time tweaking controls and more time playing,Great Tone And Pickup Range.
• 🎸The Complete Kit offers great tone and pickup range, and is made to be installed in the body of any standard acoustic Guitar.
• 🎸Pushing the bass/middle/treble/pres knob for voice frequency adjustment, with volume control, professional guitar and bass tuner Auto and manual tuning mode.

User questions & answers

Question:	Will this product work on a ukulele u-bass
Answer:	No these cheap ones, they come from china. if you want instructions you'll have to google it or buy fisherman. I had no problem finding install video on youtube for mine. good luck

Product description

Natural acoustic sound everywhere you play with the AD-2 acoustic preamp, Acoustic-Electric guitarists can now experience natural, studio-quality sound while performing on any stage. Equipped with an advanced BOSS sound engine, This compact pedal packs sophisticated processing power that belies its small size and simple, intuitive interface. Acoustic resonance reproduces the complex resonance characteristics of your unplugged tone, while ambience provides pro-level reverberation perfectly optimized for acoustic guitar. The AD-2 also features essential stage tools such as a notch filter for feedback control, a balanced DI out for direct connection to a PA, and a convenient mute function for tuning and switching guitars.

• Acoustic-electric guitar preamp with advanced BOSS sound processing
• Sophisticated under-the-hood processing with multiple interlocked parameters, accessible with simple stompbox controls
• Acoustic resonance reproduces the complex resonance characteristics of an unplugged acoustic
• Ambience knob provides wide-ranging, studio-quality reverb optimized for acoustic guitar
• Notch filter for instant feedback reduction

User questions & answers

Question:	Should this be used with an amp, or does it work going direct into the PA
Answer:	It works well either way. I have had success using it through expensive and cheap p.a. systems, and various guitar amps like Fishman and Bose. It always delivers the sound I want.
Question:	Would this be suitable for boosting/controlling the signal of an acoustic guitar with contact pickups or would a boost pedal be better
Answer:	I have found that this pedal is mostly to enhance the tone of the acoustic guitar. If you need to increase the volume you will be better off with some kind of booster pedal.
Question:	Does it work with a adaptor DC 9.5v - 1A
Answer:	I would recommend sticking with the official BOSS/Roland power supply or use a 9V battery.
Question:	Does it it work well with standard/non ac/electrics mic'd
Answer:	This box has no mic input. There are others that do, like the Zoom A3. The main function of this one is to process a piezo signal, and its tone controls are pretty minimal, so unless you want it for a piezo pickup, you should probably look at other boxes.

Product features

AD-2 Acoustic Preamp Pedal

With the AD-2 Acoustic Preamp, acoustic-electric guitarists can now experience natural, studio-quality sound while performing on any stage. Equipped with an advanced BOSS sound engine, this compact pedal packs sophisticated processing power that belies its small size and simple, intuitive interface. Acoustic Resonance reproduces the complex resonance characteristics of your unplugged tone, while Ambience provides pro-level reverberation perfectly optimized for acoustic guitar. The AD-2 also features essential stage tools such as a notch filter for feedback control, a balanced DI out for direct connection to a PA, and a convenient mute function for tuning and switching guitars.

Bring Your Acoustic’s Natural Sound to the Stage

The tone of an acoustic guitar is created by the complex interaction of sounds from its body, top, strings, and other elements. And as you play with varying techniques, dynamics, and more, this interaction constantly evolves to create the rich, woody sound we love. Unfortunately, the standard undersaddle piezo pickups installed on most stage guitars simply can’t reproduce this resonant complexity. The AD-2’s Acoustic Resonance effect solves this issue by analyzing the input signal as you play, and then employing advanced processing to beautifully recreate your guitar’s naturally evolving tone. Twisting the one-knob control adjusts multiple parameters inside the AD-2 to achieve the perfect tonal balance for any style, from delicate fingerpicking to intense strumming.

Enhance Your Guitar with Pro-Quality Reverb

After using Acoustic Resonance to bring back your guitar’s natural, intimate tone, adding some further depth and dimension with a little reverb makes it that much better. With the AD-2’s Ambience effect, you can dial in studio-quality reverb for any performing environment. Unlike standard reverbs that can cloud an acoustic guitar’s sound, the optimized BOSS algorithms in the AD-2 produce lush, deep ambience that perfectly complements your instrument’s voice. Like the Acoustic Resonance effect, a simple one-knob control tweaks many interlocked parameters under the hood, giving you access to a wide range of detailed reverb sounds.

DI Output and Feedback Killer

The AD-2 features two independent outputs for performance flexibility. Connect the Output jack to your acoustic guitar amp or stage monitor, and use the Line Out to send a balanced signal direct to the PA mixer. It’s even possible to turn off the Ambience effect in the Line Out signal, giving the PA engineer the flexibility to add their own reverb at the board. And if you encounter any low-frequency feedback issues on stage, the AD-2’s notch filter has you covered. As soon as you hear that familiar rumble, just turn the Notch knob until it goes away. It’s that easy!

• Guitar Pickup:The F-5T pickup is great for tuning on the move or on-stage. It features a note function for manual string tuning as well as an auto mode which will detect the string you are tuning automatically.As well as giving your guitar a modern look, the backlight LCD ensures visibility in all lighting conditions.
• With Tuner Function For Tuning Easily:The built-in tuner will be preferable over a clip-on tuner in noisy conditions. The indicators will ensure your guitar will always be perfectly in tune and within 10 cents accuracy.
• Easy To Read:LCD display, easy to read. Professional guitar and bass tuner Auto and manual tuning mode.The three LED lights will show if the string is flat, sharp or in-tune.
• Great Tone And Oickup Range:The Complete Kit offers great tone and pickup range, and is made to be installed in the body of any standard acoustic Guitar.Great accessory for electric acoustic and classic guitars.
• After-sales Guarantee:If you have any questions about the product,or you encounter problems with your use, you can contact our customer service. He will provide you with a solution in good time.No need worry about after-sale services.

User questions & answers

Question:	Do these fit in the factory holes of the ibanez aes10eam1202 acoustic? to replace the ibanez 5aeq43f that failed
Answer:	no it didn't fit.
Question:	Does come with a pickup
Answer:	Yes
Question:	I need something for flat surface. Is this flat and not curved
Answer:	A little curved
Question:	will this allow me to hook up my non-electric acoustic guitar to an amplifier
Answer:	Yes, once you have installed it correctly, your non electric acoustic will become electric-acoustic. Just be sure to install the piezo pickup under the bridge correctly.

Product description

Specifications:

Input: 1/4" monaural Jack

Output: 1/4" monaural Jack

Power Supply: DC 9V AC adapter (center minus plug)(not included)

Item Size: 9.3 * 3.8 * 3.2cm / 3.7 * 1.5 * 1.3in

Item Weight: 155g / 5.5oz



Note:

Power Adapter is not included.

Please use the power adapter whose polarity is positive pole outside and negative pole inside. Otherwise, the product may not work properly.



Package List:

1 * Effect Pedal

• Electric guitar preamp overdrive effect pedal for guitar players.
• 4 functional knobs(Gain/Volume/Bass/Treble) for adjust the performance of the overdrive effect.
• True bypass footswitch for switching between chorus effect and bypass status.
• LED light for indicating effects or bypass status.
• Full metal shell and compact size, durable and portable.

User questions & answers

Question:	What ma is it cant find any output power usage. What ma is it
Answer:	Ball End. Truman Price, author of "Canora--Notes from an Old Time Fiddler."

Product description

Specifications:

Material: Plastic

Control Range: Bass --±12dB at 80Hz

                       Middle-L --±12dB at 500Hz

                       Middle-H -- ±12dB at 1KHz-2KHz

                       Treble -- ±12dB at 10KHz

                       Pres -- ±12dB at 3KHz

A4 frequency: 440HZ

Tuning Range: A0(27.5Hz) - C8 (4186.01Hz)

Power Supply: 1 * 9V Battery (not included)

Item Size: 8.5 * 5.5 * 4.5cm / 3.3 * 2.2 * 1.8in

Item Weight: 90g / 3.2oz

Package Size: 10.5 * 7 * 7cm / 4.1 * 2.8 * 2.8in

Package Weight: 115g / 4.1oz



Note:

Battery is not included.



Package List:

1 * Guitar Pick-up System

• Pickup, tuner and equalizer system for acoustic guitars.
• 5-band EQ (BASS, MID-L, MID-H, TREB, PRES).
• With LCD display, easy to read the tuning information.
• With volume control knob and low battery check LED.
• Ideal for acoustic guitar players to improve the guitar sound.

User questions & answers

Question:	Does this come with a template
Answer:	Our Sauvie will be good to wear in mild cold temperatures. We would not recommend for colder/extreme winter weather.
Question:	Does this come with a pick up rod
Answer:	These are women's sizes. In reading reviews of many rain boots that don't come in 1/2 sizes, it seems that people usually have to go up a full size and hope for the best. I have tried this with other boots and not been happy with either fit. Unfortunately it is trial and error. I went through many boots before finding these.
Question:	What is the measurement between screws
Answer:	I haven’t been on ice yet but I wouldn’t expect them to be as good as nonslip as boots made specially for ice. The tread just isn’t that deep. I love these boots though.
Question:	My guitar does not have this normally but I want to install one for recording purposes, will this work
Answer:	Yes. Very comfortable and flex easily.

• An analog acoustic preamp with digital effects and looper function.
• with Reverb and Chorus effects and, each effect designed to control by only one-knob.
• Versatile Preamp,you can optimize the preamp input according to your guitar pickup type, you can set Piezo or Magnetic for better signal processing.
• 3-band EQ (Bass, Middle and Treble),60 Seconds Looper
• Notch Filter ON/OFF Toggle Switch with Precision Adjustment Control,XLR DI Output

User questions & answers

Question:	Phantom power
Answer:	No.
Question:	Can this pedal mute its output? (For example, when tuning
Answer:	this pedal has no mute switch.
Question:	Does this come with power supply
Answer:	this pedal is without power supply. Any power supply for guitar effects is ok for it.
Question:	where are they manufactured
Answer:	Cherub Technology in China,

Product features

Improved Clarity,One-Knob Control High-Quality Effects

Improved Clarity

NUX Stageman Floor is an analog acoustic preamp with digital effects and looper function. Preamp featured with a highly sensitive 3-band EQ with MID scoop toggle switch, adjustable notch filter, and input gain control. And it provides a ginormous headroom which delivers the sound all natural.

One-Knob Control High-Quality Effects

It equipped with Reverb and Chorus effects and, each effect designed to control by only one-knob, when you tweak the chorus or reverb knob from 0 to 10 it adjusts multiple parameters with a perfect balance. And the chorus switch is a momentary footswitch, while you push and hold, it will activate the freeze effect until you release it.

Notch Filter

You can turn ON the notch filter and adjust the frequency to clean the notch sound caused by a guitar pick or nails.

Versatile Preamp

Also, you can optimize the preamp input according to your guitar pickup type, you can set Piezo or Magnetic for better signal processing. And it has the FX Loop input, you can use a TRS cable and connect any effect unit to Stageman Floor. When you push both footswitches, Stageman Floor turns into a looper pedal with 60 seconds recording capacity and unlimited overdubs.

Its also the best choice for various acoustic instruments like the violin, mandolin, banjo and many more.

Connections

Stageman Floor has all the useful input/output connections.

• 7 different preamp models that cover a wide variety of classic and modern guitar tones.
• Every preamp model has two channels with a saveable preset slot for each preamp.
• Built-in cabinet simulation allows users to connect directly to mixer/PA system.
• Footswitch can be used to switch channels or to toggle pedal ON/OFF. ONE-YEAR GUARETEEN.

User questions & answers

Question:	Can this be used a regular guitar pedal plugged into the input jack of a clean channel amp
Answer:	No, the FS06 is designed as the digital preamp pedal, recommend not to use wiht the INPUT of amplifier directly to avoid unexpected tone issues.
Question:	Can you turn the cab sim off
Answer:	Yes! Press the SAVE button and footswitch simultaneously to turn on/off the cabinet simulation. The footswitch LED will blink slowly when the cab sim is on. The LED will not blink when the cab sim is off.
Question:	Can this be used with an acoustic bass guitar
Answer:	No, it's designed to be used with electric guitar.

Product features

Editing/Save preset

Rotate the BASS, MID, TRE, LEVEL, GAIN knobs to edit the tone of the currently selected

preamp model. When any change is made from the saved preset, the LED indicator will

blink slowly indicating the change has not yet been stored. Press and hold the SAVE

button to save current settings. The LED will blink rapidly indicating save has been

successful. Pressing SAVE button once will change to the next preamp model without

saving.

Effect List

Product description

Fishman Onboard Preamp Musical Instrument Accessory Folk Guitar Wooden Guitar Pickup Pick Holder For Acoustic Guitar Features: Small footprint fits many guitars. Volume control. Bass, Middle and Treble control knobs. Built-in tuner with LED display. Phase switch. Low battery indicator. Unique pivot design for instant 9-Volt battery access. Pre-wired Fishman Sonicore pickup for easy, solder-free installation Low profile control knobs. Onboard anti-feedback control (Notch). Brilliance control for additional tone shaping. Includes Sonicore Undersaddle Pickup. Volume, Bass, Midrange and Treble controls. Brilliance Control, Notch Filter, Phase Switch. Built-in Chromatic Tuner. Easy Access Battery Compartment. Solder-free Installation. Description: The Presys+ Onboard Preamp System is designed and built to offer maximum control, performance and quality in a small, unobtrusive format. The compact, sophisticated Presys+ system features Volume, Bass, Mid and Treble controls, Brilliance control, Notch Filter control, Phase switch for controlling feedback, and a built-in tuner with LED display. The Presys+ also includes a pre-wired Fishman Sonicore pickup for solder-free, plug and play installation, a low battery indicator, low profile control knobs, and a unique pivot design for easy access to the battery compartment. Specifications: Brand name: FISHMAN Model: PRO-PSY-201 Color: black Size: 84.2*55.8*41.3mm Package Included: 1 x Fishman Onboard Preamp 1 x End pin Jack 4 x screw 1 x Manual 1 x tag 2 x Mounting bracket(Battery is not included) Notes: 1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. 2. Due to different personal measuring techniques, there might be 1-3cm error of the physical. Thank you!

• ★Built-in tuner with LED display. Phase switch.
• ★Low battery indicator. Unique pivot design for instant 9-Volt battery access.
• ★Pre-wired Fishman Sonicore pickup for easy, solder-free installation
• ★Small footprint fits many guitars. Volume control. Bass, Middle and Treble control knobs.
• ★Low profile control knobs. Onboard anti-feedback control (Notch). Brilliance control for additional tone shaping.

User questions & answers

Question:	Does it have a curve to it
Answer:	these are ball end
Question:	Does this preamp have a microphone pickup as well as a piezo or does it have only the piezo pickup
Answer:	I believe they do but save your old one you can put it on the new string if you need it
Question:	Is this genuine fishman
Answer:	Helicore uses a twisted wire core which produces a sound comparable to synthetic core strings. Zyex uses a solid core which produces a generally brighter sound.
Question:	does this include the pickup as well. I am putting in a cigar box guitar and wanted to know how pickup is mounted in guitar
Answer:	If you mean the tiny bit of plastic about 3 mm long for where the string sets on the bridge, yes. No other tube - Truman Price, author of "Canora, Notes from an Old Time Fiddler"