8 best audio mixer 2 channel

• VERSATILE & COMPACT - The perfect way to mix multiple sound sources incl. smart phones, tablets, computers, MP3 players, Amazon Echo, etc.
• Ultra-small mixer: East to carry and operate and mix multiple sound sources without limitation and boundary.
• USB or battery power mode: Powered by 5V/1A USB or 1.5V battery (AAA)
• Stereo 3 input / 2 output: It can connect 3 audio inputs at the same time Each track has an independent volume adjustment knob, which can be output by headphones and speakers.
• Function with 3 external sound input and 1 stereo output both for 3.5mm, volume control for each channel.

User questions & answers

Question:	Does the headphone jack cut off the line out when a cable is inserted? If so, how would I rig up an external female plug to be the "mute switch
Answer:	Dear Jacob M. Brown-heft , Thank you so much for inquiring. The Just Mixer S do not provide condenser mic. Because the Just Mixer S do not provide phantomor plug-in power for microphone. Regular mics that can be connected directly to the microphone jacks of PCs will work fine, but condenser mics and other mics requiring additional power source may not work. As below link for reference. Dynamic Microphone https://www.amazon.com/Mugig-Dynamic-Microphone-Suitable-Podcasting/dp/B071NP1D3V/ref=sr_1_4?ie=UTF8&qid=1512270845&sr=8-4&keywords=dynamic+mic XLR to 3.5mm https://www.amazon.com/CableCreation-3-5mm-Stereo-Female-Cable/dp/B01JY2BN64/ref=sr_1_1_sspa?s=musical-instruments&ie=UTF8&qid=1512270963&sr=1-1-spons&keywords=xlr+to+1%2F8&psc=1 So we suggest that you can use Dynamic Microphone and connect XLR to 3.5mm adapter. On the other hand, you can use AVL606 Microphone which has provided power. Besides , we have a microphone mixer of Just Mic 4 and Just Mixer M , Loop Mixer 8 for mics Mixer for reference. Please let me know if you have further questions or comments. Thank you again.Have a good day. Best Regards, Sandy Tsai
Question:	Is this trrs
Answer:	Dear Chanwoong Park, Thank you so much for inquiring. The Just Mixer S do not provide condenser mic. Because the Loop Mixer do not provide phantom or plug-in power for microphone. Regular mics that can be connected directly to the microphone jacks of PCs will work fine, but condenser mics and other mics requiring additional power source may not work. As below link for reference. Dynamic Microphone https://www.amazon.com/Mugig-Dynamic-Microphone-Suitable-Podcasting/dp/B071NP1D3V/ref=sr_1_4?ie=UTF8&qid=1512270845&sr=8-4&keywords=dynamic+mic XLR to 3.5mm https://www.amazon.com/CableCreation-3-5mm-Stereo-Female-Cable/dp/B01JY2BN64/ref=sr_1_1_sspa?s=musical-instruments&ie=UTF8&qid=1512270963&sr=1-1-spons&keywords=xlr+to+1%2F8&psc=1 So we suggest that you can use Dynamic Microphone and connect XLR to 3.5mm adapter. On the other hand, you can use AVL606 Microphone which has provided power. Besides , we have a microphone mixer of Just Mic 4 and Just Mixer M , Loop Mixer 8 for mics Mixer for reference. Please let me know if you have further questions or comments. Thank you again.Have a good day. Best Regards, Sandy Tsai
Question:	Can I use this to combine two mics into a dual mono output? I want to hear both mics on both output channels equally
Answer:	The amp does a decent job with my turntable - you'll need to play with the volume and balance a little to get it where you like it, but it works well.
Question:	Is it possible to be a microphone as one of the input sources
Answer:	You have to break them in before that. I would wait like a couple of weeks of constant listening

Product features

PANEL FUNCTION

Specifications

Gain : 25dBm

Current consumption : 70mA (max) Power supply USB 5V/1A power or 1.5V battery (AAA)

Dimensions :100 x 55 x 15 mm/ 3.9" x 3.1" x 0.6"

Weight : 70 g / 2.5oz (body)

Accessories

USB Cable x 1

3.5 to 3.5 audio cable x 1

1.5Vbattery(AAA) x 2 (Alkaline battery-Use About 15 hours)

dust bag x 1

Owner’s Manual x 1

HOW TO USE

• Connect headphone/ speaker and audio input.
• Connect USB power /1.5Vbattery(AAA).
• Turn on the power switch.
• Adjust the volume for each channel in use and master volume.

About Power Sources

We recommend that the power source not be used together with other devices in order to prevent noise. Before connecting other devices, please disconnect the power of all other devices in order to avoid causing damage to the product or its functions. Do not use a shared circuit power supply with a device that generates line noise, such as electric motors or lighting systems with dimmer functions. Do not step on or place heavy objects on the power cord to avoid damaging it. When unplugging the power supply, hold the head of the plug and do not pull the cord itself. If the device is not going to be used for a period of time, please disconnect the power.

POWER SOURCES

The Just Mixer S have 3 Segment switch USB/OFF/battery

• USB Power USB 5V/1A : display blue light
• Battery case 1.5V battery : display green light

APPLICATION

VERSATILE & COMPACT - The perfect way to mix multiple sound sources incl. smart phones, tablets, computers, MP3 players, Amazon Echo, etc. East to carry and operate and mix multiple sound sources without limitation and boundary.

Product description

Item Description:

This compact 4-channel mixer for mixing 4 line level signals quickly and easily, it features 4 channels input and 1 channel output line, with independent volume control for each input channel, ultra low noise and high sonic quality, best choice for your high sound requirement.

Features:

Ultra-compact 4-channel mixer for mixing 4 line (MONO)signal quickly and easily.

Features 4 channels input and 1 channel output line.

Independent volume control for each input channel.

Highest sonic quality even at maximum output level.

Ultra low noise for outstanding audio performance.

Comes with a 12V DC power adapter, with light for indicating power on.

Specifications:

Material: Metal

Color: Black

Power Adapter: US Plug

Voltage: 12V(Out); 110-240V(In)

Input Jack: 1/4'' TS Connector, Stereo

Output Jack: 1/4'' TS Connector, Stereo

Item Size: Approx. 10.5 * 5.7 * 4.7cm / 4.1 * 2.3 * 1.8in

Item Weight: 185g / 6.5oz

Package Size: 22.5 * 14 * 9cm / 8.9 * 5.5 * 3.5in

Package Weight: 379g / 13.4oz

Package List:

1 * Amplifier

1 * Power Adapter

1 * User Manual (English)

• Ultra compact 4 channels input and 1 channel output line MONO mixer.
• Each input channel can be adjusted volume individually.
• With highest sonic quality even at maximum output level.
• Ultra low noise 4580 operational amplifier for outstanding audio performance.
• Comes with a DC 12V power adapter.

User questions & answers

Question:	Would this work with aux out from a headphone jack on a mixer for one channel and head output On mixer and another from iPhone
Answer:	If it's a newer computer or mic...no.
Question:	Is the a rebranded behringer microamp ha400? thanks
Answer:	The microphone connection port can use Mini XLR and 3.5mm audio cable. If not, you need to purchase a conversion cable to connect.
Question:	Does this have a pre amp built in so I could input 2 microphones and output to simple amp with speakers for a simple PA system
Answer:	Haven't used any of them
Question:	Is this for Xlr mics
Answer:	We have a keyboard in the band, and the sound from all instruments is fine. We use this as a monitor, so we maybe haven't listened as critically as our main setup. It's lightweight (Yeah), has clean sound, and is plenty loud for our needs.

Product description

Attention: The Saramonic SR-AX100 is not compatible with microphones that can't be installed with battery.

Overview

The Saramonic SR-AX100 is a two-channel audio adapter ideal for shooting videos with any DSLR or camcorder that has a standard mounting shoe and feature a 3.5mm aux mini-jack input. This adapter provides you with a compact dual-mic mounting and audio mixing solution, which allows you to easily mount and control two microphones or wireless receivers. It requires no batteries or power source. The SR-AX100 features a passive circuit making it virtually noise free and does not require batteries. It can be used for interviewing, small talk show, broadcast, family party and micro movie. Voice from -12dB to -6dB are needed when recording via microphones into cameras or camcorders. Sometimes, the voice needs to be attenuated with the Saramonic SR-AX100 audio adapter to make the best sound. The Saramonic SR-AX100 enables you to control the voice by knobs and turns the mono into stereo.

Highlights

Inputs: One 3.5mm (1/8") stereo and two 3.5mm (1/8") mono inputs

Output:One 3.5mm (1/8") stereo output

Dual control knobs; Mono/Stereo switch

Universal camera/camcorder attachment via standard hot-shoe. Also features three integrated mounting shoes for microphones, recorders, lights, etc.

Passive circuit requires no batteires

Technical Specifications

Inputs: One 3.5mm (1/8") stereo and two 3.5mm (1/8") mono

Output: Stereo 3.5mm aux mini-jack

Input Level: -35dBu

Frequency Response: 10Hz to 100 kHz (+/- 1.5dB)

Construction: Aluminium

Dimensions (LxWxH): 7.6x5.9x5.5cm

Weight: 153g (5.4 oz)

Warranty: 1 Year

Package Included

1* Saramnic SR-AX100 audio mixer unit

1* User manual

Original Manufactory Package

• 2 CHANNELS – The Saramonic SR-AX100 is a universal audio adapter that features two types of inputs. One input is to for stereo mic connection, the other is for mono microphones.
• FLEXIBILITY – This adapter has 3 integrated mounting shoes that can be easily attached to a variety of wireless receivers and microphones. You can mount it on a DSLR, mirrorless digital camera or camcorder that accepts a 3.5mm mini-stereo input cable.
• SIGNAL ADJUSTMENT – For optimum recording levels, use the dual trim control knobs to adjust the signal of each channel in the SR-AX100 adapter.
• CONVENIENT LISTENING – The SR-AX100 lets you listen to audio recordings through any headphones. Simply plug it into the built-in headphone jack.
• One Year Warranty

User questions & answers

Question:	Can two wired lav mics be plugged in to this adapter
Answer:	You require SPKON cables or 1/4” to SPKON Adaptors (much less expensive option, if you already have 1/4” PA speaker cables. Regular 1/4” guitar cables are supposedly not rated for PA speakers, according to Guitar Center reps. http://www.guitarcenter.com/Pig-Hog/Solutions-1-4-to-SPKON-Adapter.gc
Question:	Can you connect two mics let’s say if I want to run a podcast ? Can I connect two mics that go on the table we have
Answer:	As long as it’s got a combo audio jack
Question:	Why should someone use this instead of a Y splitter cable other than the advantage of adjusting the gains
Answer:	Yes, you can use it during live streaming as well
Question:	Does this work with rode video go mic? the rode video go is powered up through the camera
Answer:	Yes, just follow the instruction book.

Product description

Would you want to mix and convert various sounds according to your needs when in home music production, webcast, K song?

YOUSHARES Professional Ultra Low-Noise 4 Channels Audio Mixer Is You Best Choice



Mix What You Want

You can use the audio mixer to blend various audio sources or instrument through four input channels down into one channel. You can mix electronic drum, mixing guitar or MP3 player what sound you want to mix.



High Sound Quality

4 channels line mixer give the nice and pleasure experiences when you are using. You will be surprised that there is no hum hissing and audible noise added into the system.The sound is pretty fluent and transparent.



Easy to Adjust

You can use the four volume knobs of audio mixer led on the front panel to adjust each channel input level.



Flexible Power Supply

1)can be directly connected to the PC's USB port power supply through the USB power supply.

2)Use the mobile power or USB AC / DC.





Specification

◆2 channel signal input and one channel stereo input

◆ One main channel output,one AUX output and feed back

◆ Independent channel for recording output and monitor

◆ Low-noise,high-precision microphone preamplifier with perfect sound quality

◆ Balanced XLR microphone input and balanced TRS line inputs,3-band channel EQ

◆ 48V DC phantom power will responsible for connect with condenser mic,and power supply for input port

◆ Port for eqrphone monitor

◆ Precision logarithmic double 10 LED level display

◆ MP3 module,USB interface,and display

◆ Built-in switching power supoly is flexible(AC100-240V AC),low power consumption



Package Included:

1 x Sound Mixer

1 x USB Cable

1 x Power Adaptor with USB Port

1 x User Manual



Note: Please refer to the user manual before use.

• Low-Noise 4 Channel Audio Mixer - Mini sound board mixer yields the highest sonic quality at all output levels, boasting ultra low-noise operational for outstanding audio performance. No distortion and easy to set up, perfect for mixing 4 line level signals quickly and without complications.
• Multifunctionality - Professional 4-channel mixing console and monitor paths plus effects processor with two mono channels and one stereo tape channel, With input gain and high bass adjustment, built-in +48V phantom power, high-definition headset putput port, MP3 broadcast, Sound card function for the computer.
• Easy to Adjust - Each channel on the line mixer has an independent input plugs, volume adjust button, and output for an amplifier. There is a simple LED when 4 channel mixer is powered on. You can collect many sounds from different sources, such as microphones, guitars, bass and keyboards into one listening place of the music mixer to monitor.
• Compact Format - It is compact and small size to fit perfectly on top of your keyboard. It is easy to adjust and control what you want audio mix.
• Multi-scene Use - The mixer is ideal for recording and music production where several channels need to be mixed. It's perfect for your drum kits, keyboards, small-stage setups.

User questions & answers

Question:	This one has blue tooth
Answer:	I don't believe so. All three are inputs only.

Product description

BEHRINGER 5 IN MIXING BOARD W EQ. Mains voltage - 120 V~, 60 Hz

• Premium ultra-low noise, high headroom analog mixer
• State-of-the-art, phantom powered XENYX Mic Preamp comparable to stand-alone boutique preamps
• Neo-classic "British" 2-band EQ for warm and musical sound
• Main mix, stereo CD/tape plus separate headphone outputs
• CD/tape inputs assignable to headphone output or main mix outputs. Power consumption 13 W

User questions & answers

Question:	I didn't really understand the inputs on this mixer. So I have 3 electric guitars, and an electronic drum kit. Can all of these,with mic,be connected
Answer:	This mixer does not have sufficient mono channels for your application. Channels 2-3 and 4-5 are stereo inputs (meaning they are contolled with the same fader). Some of the larger Xenyx mixers will get you the inputs you need.... something with at least 5 distinct faders to control each instrument's mix individually.Hope this helps. :-)
Question:	Does this mixer support 48V Phantom Power
Answer:	Most microphones do not require 48 volts of phantom power. Many condenser microphones only require somewhere between 4 and 12 volts. You should check your mic. It looks like this is a 15 volt feed.
Question:	Can this mixer connect to a PC via a soundcard
Answer:	Yes, to an analog soundcard. All you need is a 1/8" stereo to dual-RCA cord. Mixer has both input and output RCA capability, so you could feed the output of the mixer to the line/mic of the soundcard or feed the output of the soundcard (line out/speaker out) to the input of the mixer. There is also a headphone jack on the mixer so that could also be patched back to the soundcard's line in/mic. For me, I am usually running the PC speaker out to the mixer RCA input -- the volume is controlled by the Main, and then I can either use headphones from the mixer or run the 1/4" output into my guitar amp. Hope this helps.
Question:	What does the 2 track input do
Answer:	The 2 track input allows you to connect an external music source to the xenxyx mixer and then into an amplifier with speakers or headphones using the outputs located near the top. The external music source can be anything that has the red and white RCA outputs such as a cassette/CD player or VCR/disc player (the red and white input/output for the 2 track are called RCA connectors). This is so you can plug in your CD player and also a microphone and an instrument that has a 1/4" output such as a guitar or electric piano and have it all mixed together. Just below the 2 track input are a couple of buttons that allow you to choose whichever output you want, either headphones or amplified speakers (main out). The 2 track outputs on the mixer will allow you to send the vocals and/or instrument mix to a recording device that has the red and white RCA inputs. I hope this helps.

Product features

Xenyx 502

Got a solo gig at the local coffee shop? Need to make a quick public announcement? Simple sound calls for the simply superb Xenyx 502, the mixer with everything you need to give an intimate setting incredible sound. The ultra-compact Xenyx 502 mixer’s 5 Inputs (1 mic, 2 stereo) allow you to effortlessly achieve premium-quality sound, thanks to the studio-grade, phantom-powered Xenyx Mic Preamp and ultra-musical 'British' channel EQ.

Sublimely Musical British EQ

The British consoles of the 1960s and ‘70s changed the sound of rock and roll – without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our Neo-classic 'British' 2-band EQ for warm and musical soundmixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

The Ins and Outs

The 5-input, 2-bus Xenyx 502 with xenyx mic preamp can accommodate either a dynamic or condenser microphone. The 2-band British EQ is famous for its warm, musical sound. Play music between sets via the RCA CD/Tape Inputs (main mix or control room/phones assignable) and record your performance to an outboard recording device via the RCA outputs.

Small is Beautiful

Weighing in at a mere 1.2 pounds (0.55 kg), the xenyx 502 is the portable, practical way to turn a speech or scaled-down performance into a sound to behold. Schools, meeting rooms, restaurants and songsmiths the world over agree this mighty mite is a high-fidelity lifesaver.

Amazing Value

No matter what your audio mixing needs, the xenyx 502 provides the performance and features that can take your talent to the next level,Professional sound quality, our legendary Xenyx mic preamps, British-style EQs and rugged reliability make Xenyx 502 ideal for both your live gigs and recording. Try one on today – we have one available in your size!

Product description

The MX51S mini mix 2 is small four-channel mixer with individual volume controls, and a headphone/ line output. The unit has one XLR input along with an 1/8” input and 3 sets of stereo RCA inputs. It has enough gain and output level to connect to a power amplifier, with either RCA or 1/8” jacks. The MX51S is powered by an included rolls PS27 12 VDC adapter.

• For mixing a microphone XLR input with up to three RCA input signals
• four channels total
• line/ headphone output level
• Brand : rolls
• Model : MX51S

User questions & answers

Question:	Hey guys does this come with an a/c adapter? That one dude in the reviews said his did not
Answer:	Mine certainly did come with AC adapter. It can not function without. It’s a great device. I wish it had an on/off switch. I unplug the power cord from the rear of the unit as the AC adapter is plugged into a Monster voltage protector with the other audio gear so to me it’s just easier this way.
Question:	Can it be used to have two audio devices connected to one set of speakers? If so, will they be able to play at the same time
Answer:	Yes. That is exactly why I purchased this device. It mixes four sources to one output. If you just have passive speakers, you will need amplifier, but probably your "set of speakers" does include amplifier.
Question:	Are others having problems with hum or ground noise on channel 1 when using condenser microphones with phantom power
Answer:	I Just Bought this device and powered it up adn the Hum/Ground noise Happens even without the condenser microphone switch off or ON, with or WITHOUT the microphone plugged in.
Question:	Description: "It has 2 1/4" inputs and 3 sets of stereo RCA inputs that are mixed to MONO." Are the L and R inputs really mixed together
Answer:	apparently Amazon confused the description. There is a Rolls MX51 and a Rolls MX51s. The non-s has 1/4" inputs and mixes to mono. The "s" model had 1/8" input and XLR input and mixes stereo.

Product features

Rolls MX51S Mini Mix 2 Four-Channel Stereo Line Mixer

The MX51s Mini Mix 2 is small four-channel mixer with individual volume controls, and a headphone / line output. The unit has one XLR input along with an 1/8" input and 3 sets of stereo RCA inputs. It has enough gain and output level to connect to a power amplifier, with either RCA or 1/8" jacks. The MX51s is powered by an included ROLLS PS27s 15V adapter.

Specifications:

• Power: ROLLS PS27s adapter, CH 1 Gain: 32 dB XLR jack (highest gain)
• Phantom Power: for CH 1 microphone XLR, Ch2 Gain: 26 dB 1/8" and RCA
• Ch 3 and 4 Gain: 26 dB each RCA, Output: 1/8" stereo and stereo RCA
• S/N Ratio: >90 dB, THD: <.008%, IMD(SMPTE): <.008%
• Input Impedance: 10K Ohms unbalanced each jack, Size: 3" x 5" x 1.25" (8 x 13 x 3.2 cm)
• Weight: 1 lbs. (.45 Kg), For mixing a microphone XLR input with up to three RCA input signals
• Four channels total, Line / Headphone output level
• ROLLS PS27 AC adapter included, Stereo RCA Line-Level Output

Product description

The MM1 Compact mixer from Gemini is proof that good things come in small packages. The perfectly compact design of our MM1 2-channel stereo mixer gives DJs of all types the control they demand with features to fit any kit. The beauty of the MM1 mixer is its professional and consumer-friendly design that combines efficient use and an unmatched level of quality. Perfect for both novices and experts alike, the MM1 unit will keep your rig light and looking great while remaining a dependable mixing solution for your top tracks. A smooth yet sturdy cross-fader makes transitioning from source to source effortless and clean as you craft your sound, while individual gain control lets you fine-tune your final piece. With the inputs and outputs of the pros, you'll master your mix sooner than you thought. Each channel on the MM1 unit booms with 2-band rotary EQ, giving you the ultimate power to delicately blend the highs and lows of your tracks. The MM1 mixer features two line RCA inputs, master RCA output, and 1/4″ Microphone Input with dedicated Volume Control that serve as the perfect connectors between you and your audio. The MM1 also includes a Headphone Volume Control that lets you preview your creation to ensure you sound polished and professional for your audience. At Gemini, our goal is to design products that offer value and innovation in the DJ and Pro Audio markets. Since 1974, we’ve evolved and thrived by understanding the needs of our customers and recognizing industry trends. From our humble beginnings, we understood the potential of the DJ movement, and our ability to support this movement not only helped us grow as a company, it helped DJs gain recognition and esteem, calling deserved attention to their roles as artists and performers.

• BIG MIX, LITTLE PACKAGE: The MM1 2-Channel Stereo Mixer has a Compact Design for Both Consumers and Professionals. The 2-Band Rotary EQ with Gain Control Lets You Blend the Most Detailed Tracks. Screwless Bottom Panel Makes for Unobstructed Mixing.
• SILKY SMOOTH MUSIC MIXING: The MM1 Mixer Provides A Smooth, Sturdy Cross-Fader for Effortless and Clean Transitioning. This Unit Also Features Individual Gain Control Lets You Fine-Tune Your Final Piece Into Your Magnum Opus
• TOTAL CONTROL OVER YOUR MUSIC: The MM1 Unit Features Rotary Headphone Volume Adjustment That Ensure You Can Preview Mixes for Final Touches and Make Them with the Easy-To-Use Rotary EQ Control
• THE INPUTS/OUTPUTS USED BY THE PROS: The MM1 Mixing Unit Includes Two Line RCA Inputs and A Master RCA Output 1/4″ Microphone Input with Dedicated Volume Control Connect You To Your Audio
• TRUST GEMINI, AN INDUSTRY LEADER: Since 1974, We've Provided Innovative Products For DJs, Musicians, Sound Contractors and Professional Installers Around The Globe. This Is What Drives Us As An Industry Leader Is DJ and Audio Equipment

User questions & answers

Question:	Is it possible to flip/reverse the crossfade
Answer:	The power amplifier output to this mixer can be input or output to the computer through USB. What input do you have for your mixer?
Question:	I got a plug in for europe, how do I get one for US
Answer:	Dear, the product package contains instructions. If you need it now, you can email me. Thanks
Question:	My nephew only has one speaker, can he use this mixer with it . . . he's only 15 and doesn't have alot of equipment
Answer:	Yes, it can be used as an external sound card.
Question:	Are the dimensions actually 8 x 5 x 12 inches or is that Amazon's measurement of the box
Answer:	You just can use the PC or bluetooth. You can use them together. Press the mode button to change it.

Product features

Perfectly portable, full-featured DJ mixer

Just the right size for use as a session mixer or sub-mixer.

Pro Quality Connections

Headphone output and Microphone input.

Center Of Your Setup

Connect 2 decks, a mic, headphones, and even a full-blown PA.

Clear Inputs And Outputs

RCA Master and Record outputs, and 2 Line inputs.

Two Channel Mixer

Each channel has gain and 2-band EQ.

Tough Enough

An all-metal enclosure lets the MM-1 take tons of abuse.

45Mm Crossfader

Mix between channels using industry-standard controls.

Product description

This compact mixer brings the same standard of quality to your performances as other top-of-the-line models. Our dual channel mixer is the perfect mixer for quick, easy setups with little hassle. Designed for beginner to pro, our mixer to preamplifier provides outstanding audio quality for your projects.

Compact with clarity for your audio needs. An ideal item for streamers and pod casters looking for quality in their audio performance. But your not limited with the flexibility of our Dual microphone ports with individual volume control, separate your audio traffic or mix them with the flip of a switch. Simple enough for the beginner with enough power and performance for the seasoned pro, our 2-Microphone mixer to AUX preamplifier can fit any audio build. With points available to anchor the body to a stable surface. Filling in the audio gap in your audio ventures, our mixer to preamplifier can take on a wide variety of projects. From DIY to DJ events our device can meet your needs and exceed phonic aspect.

Specification:

• Input Microphone Type: 6.35mm Dynamic Microphone
• Input Impedance: 600 Ohms
• Mic Pre-Amplifier Gain: 50dB
• Signal to noise ratio: 80dB
• Power source: 12VDC
• W: 4in D: 2.5in H: 1.25in

Package Content:

• 1x Microphone mixer pre-amp main unit
• 1x AC adapter
• 1x Securing screws set

• Independently and smoothly control 2 microphones volumes separately for balanced phonic quality
• Precisely and selectively adjust your audio quality a simple knob
• A supplied adapter powers directly in to your mixer for consistent audio
• 2 3/4 microphone ports allow for a wide variety of different microphone types
• RCA ports compatible with a whole host of audio equipment will ensure you always have something to hook into

User questions & answers

Question:	Can i connect the rca jacks to my stereo aux inputs and use this as a pa system
Answer:	Arcane Scroll is mostly correct. Instead of each device that is connected to your television requiring Ethernet, there is a 100Mb connection inside the HDMI cable. This is on all 1.4 and newer HDMI cords. You would be surprised as to how many new devices are capable of using this technology. As Arcane Scroll stated, the rest of the individuals have NO idea what they are talking about and should be ignored.
Question:	I need to add two mics to my current mixer through a line in channel, will this work
Answer:	I know you have to send from A and B to a power source. An amp. I have A going to a Jcm 900 and B going to an ampeg amp. Need power for both
Question:	Can i input a corded mic directly in to the mixer and then output directly to two yamaha dbr10 speakers
Answer:	Yes, Bass amp 1 goes to A channel and Bass amp 2 to B channel. Press the A and B switch. your bass goes in the input.
Question:	Can this be used with line-level inputs
Answer:	All three of the 1/4" inputs are mono. This is basically a switchable "Y" adapter. But it works both ways: 2 inputs out to one amp, or one input to 2 amps.