13 best vocal pedals

Product description

Zoom V3 Vocal Process with 16 Studio Grade Effects, Up To 3-Part Harmony, Compression, Delay, Reverb , Pitch Correction, Battery Powered, For Streaming / Recording / And Live Performance.

• 16 Built-In Effects Pads + Delay, Reverb and Compression
• Harmony Function for adding 2-back-up harmonies
• Key and Chromatic Pitch Correct
• Can be used as an audio interface to record and stream
• Desk-top or mic stand mountable, operating with AC power or 4 AA batterie

User questions & answers

Question:	Does this come with mic stand mount
Answer:	No, there is no mount included.
Question:	Volume is a power amp (output) function where as Gain is a pre amp (input) function. Is the knob below phantom power switch gain, not volume control
Answer:	The knob below the phantom power switch is a volume knob that controls the mic input volume.
Question:	Can you hook this up to a goxlr, to potentially further enhance your voices
Answer:	A second method is to connect the 1/4"(L) and 1/4"(R) Output (line outs) from the Zoom V3 with an intermediary, impedance matching device, such as a Whirlwind pcDI box or similar, thus convert the two line outs from the Zoom V3 into a pair of XLR outputs, one of which can be passed on to the XLR microphone input on the GoXLR. This second method can be used to connect a Zoom V3 to a Zoom P8.
Question:	How long do the batteries usually last
Answer:	On four AA batteries the device will power for about 3.5 hours.

Product features

Zoom V3 Vocal Processor

Whether you’re streaming, recording, or collaborating online, the V3 is packed with effects, harmonizing options, pitch correction and more. Your voice will sound amazing - from home, or anywhere else.

All the Essentials

In addition to advanced effects, the V3 lets you dial-in reverb, delay and compression using dedicated control knob

Moment of Clarity

The V3 provides a professional quality pre-amp so you can sound your best. The Enhance function automatically optimizes the performance of any mic.

Add More Flavor

Press the Formant Character button and use the parameter knob to alter your vocal characteristics without changing the pitch.

• The JOYO Advantages: over 14 years of brand history, strong technical teams, many innovative patents, electroacoustic core technology, guide design of music masters, winning the love of global fans, inspiring people's music dreams.
• Features 9 effects: spring reverb, church reverb, steel plate reverb, echo reverb, ect. You can adjust various tones with the independent control knob.
• With MIX, DECAY, TONE adjustment and MOD depth control for the tone with modulation effect. The TRAIL dial switch for fade-out function.
• With stylish ambience LED light.
• What You Get:JOYO R-14 reverb pedal, detailed operating instructions and excellent customer service.

User questions & answers

Question:	When will the pedal be released
Answer:	YES.
Question:	Is it for bass guitar
Answer:	You could but you would have to also pass the speaker around as they are attached. If you were thinking of doing that, I would just get a different type microphone to plug into the speaker.
Question:	Will the atmosphere fit into the space provided by the behringer pb1000 pedalboard which is designed to fit boss & behringer pedals
Answer:	Yes you can, but you will probably experience horrible air and static. These mics are mediocre at best. Just wanted to give my honest opinion.
Question:	Hi, it looks great, is there any more details? Got a video
Answer:	Yes, we use it with YouTube and I really like the quality.

Product features

9 built-in digital reverb types in one pedal

JOYO R-14 Atmosphere

• Dimensions: 109*67*48mm
• Weight:248g
• Input Impedance:2.2M Ω
• Output Impedance:100 Ω
• Rated current consumption:140mA
• Working Voltage: DC 9V (center negative)

JOYO launches R series effect pedals in 2018. The whole new appearance and the iconic R series ambience. LED light bring out futuristic and retro styles, displaying a perfect fusion. R series will make your soul happy whether you are jamming in the bedroom, studio or on the stage.

9 in 1 Reverb pedal

With 9 reverbs to experience in one guitar effect pedal, all reverbs you need are here: Spring Reverb/Church Reverb/Plate Reverb/Eko-Verb Reverb/Shimmer Reverb/Comet Reverb/Rewind Reverb/Forest Reverb/Pulse Reverb

Trails Function Switch

TRAIL function switch is for switching on or off the Trail function. It allows the tone to fade out and sound much more natural between switching the pedal on and off. You decide a natural fade or a fast cut off.

MOD Depth Control

Except for the traditional MIX,DELAY and TONE knobs, MOD knob is added( Modulation effects depth control) dedicated for adding in some additional time and modulation effects to a few of the reverb available.

Product function introduction

Product description

Who says stompboxes are just for guitarists? The new, easy-to-use VE-20 has been designed from the ground up for singers, featuring some of the finest vocal-effects technology on the market. With the click of a footswitch, you can instantly add lush vocal layers and harmonies to your singing, add realtime pitch-correction, and you can show your creative side with special effects such as Distortion, Radio, and Strobe. You can even create loops and layers in real time with the onboard Phrase Looper. Perform anywhere with the VE-20 since it runs on AC or battery power.

• Model# VE20
• The Package Height of the Product is 4 inches
• The Package Length of the Product is 9 inches
• The Package Width of the Product is 8 inches

User questions & answers

Question:	Can you combine doubling, chorus and pitch control into one user setting please
Answer:	Whatever you hear or see,this effect DOES A LOT!,you really need to understand what to do,then,the worlds your oyster,it can take out vocals from any song,and replace it with yours,harmonies,high low everything inbetween,get a good shop assistant pay them $20,and get em to show you!!,you can Do anything vocally on these,I have six different types,this is the BEST
Question:	mine came with instructions in what appears to be japanese with a few english words in it.Is there supposed to be a whole set in english
Answer:	Your question, thank you. You can download the English manual from the manufacturer's site.http://roland.com/support/article/?q=manuals&p=VE-20&id=15192531
Question:	does the male to female effect sound good? I want to use that for my music
Answer:	YES IT DOES!,This guy/whatever is messing with you,it can make you sound like anything and anyone,It's Awesome and I've got 6 different kinds!!try it buy it
Question:	Does this come with a power adapter and necessary cabling or are those to be purchased separately
Answer:	BOSS includes AA batteries, not an adapter. However it will easily work with a standard 9v adapater (like PSA-120). You'll need to get cables as well, to connect your mic and amp/PA. - The Guitar Store

Product description

Voice tone x1 brings a modern "down and dirty" Quality to live vocals with tinny Megaphones and sharp vocal distortion effects under singers' Control.

• Creates modern-sounding megaphone and intense distortion effects
• Mic-control offers remote on/off via tc-helicon mp-75 microphone
• Connects between your mic and mixer

User questions & answers

Question:	how is the telephone effect on this beast
Answer:	I personally don't like this pedal. I don't know if it was my pedal or if the model is faulted but the gain knob didn't work so I wouldn't be able to tell you
Question:	are all the pedal for sale like this now equipped with the gate control, everyone is compelling about feedback
Answer:	The feedback issue is terrible. Worse, when you save your settings, it will randomly lose those settings. If you use this in a live setting, you'll drive your soundman crazy. Completely unusable pedal.
Question:	Does this pedal include Power supply
Answer:	Yes!

Product description

If you’re like most guitarists, you spend a lot of time choosing the right amps and pedals to craft your own personalized sound. But if you sing in your band as well, It hasn’t always been so easy to give your vocal sounds that same attention to detail—until now. The advanced VE-500 vocal performer provides everything you need to achieve impressive vocal harmonies and effects on stage, and all in streamlined stompbox that integrates seamlessly with the regular guitar effects on your pedalboard.

• Advanced vocal multi-effects stompbox for singing guitarists
• Automatic vocal harmony/pitch correction powered by newly enhanced BOSS algorithms for Natural sound with smooth tracking
• Class-leading sound quality and high-powered BOSS DSP engine for processing vocals with up to nine effects at once
• Extensive selection of effects specially tuned for vocals; enhance section for shaping core tone, plus reverb, delay, modulation, distortion, EQ, filter, and many other types For further processing
• Versatile and creative vocoder effect for generating electronic voice and talk box sounds based on Guitar input

User questions & answers

Question:	Can i also use this with my keyboard? i do play piano, not guitar. could i use this
Answer:	I've used the BOSS VE-20 Vocal Processor with an Aerophone AE10, a wind-controlled, digital synth instrument, using a simple 1/4 in. cable connection, all effects coming through with no issues. If that combo works with the (junior) VE20, then I'm assuming it would also work with this item.
Question:	What voltage(s) does this support
Answer:	It uses a 9VDC 0.5 A supply. However Boss states that you should use their Boss PSA power supply.
Question:	Can i output 1 xlr cable, or do i have to output 2 into a mixer
Answer:	You can use just one XLR cable to the mixer, just make sure that you have the effects set to mono or you'll lose part of the output signal.
Question:	In the manual on page 18 it says "view the 'parameter guide' and 'midi implementation chart' (pdf)" - where is the 'midi implementation chart' pdf
Answer:	Follow this link if your unit did not come with the Parameter Guide... https://www.boss.info/global/support/by_product/ve-500/owners_manuals/5f989991-295b-4dbc-8b60-3bf0eaa91adc/

Product description

Features:

When in Detune mode, the range is: -25/-20/-15/-10/-5/0/+5/+10/+15/+20/+25 cents.

Mode switch: Switch between up, detune and down mode.

Output jack: 1/4" mono audio jack for signal output.

Input jack: 1/4" mono audio jack for connecting guitar.

True bypass footswitch and lever designed to prevent stamping on operation knobs.

Specifications:

Model: AROMA AHAR-3

Effect: Pitch Shifter

Material: Aluminium Alloy

Input Impedance: 470K Ohms

Output Impedance: 100 Ohms

Current Draw: 68 mA

Power supply: AC Adapter 9V DC (not included)

Item Size: 9 * 3.8 * 4.8cm / 3.5 * 1.5 * 1.8in

Item Weight: 151g / 5.3oz

Package Size: 12 * 7 * 6.5cm / 4.7 * 2.7 * 2.5in

Package Weight: 245g / 8.6oz



Package List:

1 * Guitar Effect Pedal

2 * Adhesive Tape

1 * User Manual (English & Chinese)

1 * Hardcover Box

• Full metal shell;3 controlling knobs and 1 switch are accurate and high sensitive.
• Mode switch: Switch between up, detune and down mode.
• Dry knob: Adjust the volume of dry signal.
• Wet knob: Adjust the volume of wet signal.
• Range knob: Choose the pitch shift range.

User questions & answers

Question:	Can this just reduce me down to an octave or a couple steps without the original guitar tone being heard
Answer:	Yes, just turn down the dry signal and turn up the wet signal .
Question:	Does it work for vocals
Answer:	No. These pedals are for guitars. There are boxes made for vocals and guitars but not this type.
Question:	Will this synchronize well boss distortion pedals
Answer:	Yes
Question:	Is this pedal polyphonic
Answer:	yes, it is, but hard to find good polyphonic sound, I'm using BOSS Harmonizer 100% better.

Product description

VE-2 Vocal Harmonist Multi-Effects Pedal. Combining sophisticated sound with simple operation, the VE-2 Vocal Harmonist delivers a complete effects solution for all singers, particularly those that perform with guitar. This portable, battery-powered stompbox has everything you need to create polished, studio-quality sounds everywhere you sing, from concert stages and street performances to practicing and having fun at home. The VE-2 magically creates beautiful harmonized vocals that follow your singing, with pitch that automatically tracks the chords played on a connected guitar, a preset key, or a combination of the two. Using one of these three operation modes, it's easy to create perfect real-time harmonies in any key, even if you have no experience with gear or music theory. In addition to harmony, the VE-2 provides essential effects to enhance your voice, such as high-quality reverb/delay and an enhancer with real-time pitch correction. Also included is a USB audio function that allows you to connect to your computer and easily capture impressive VE-2 vocal sounds for music recordings, social media videos, and more.

• Real-time vocal harmonies and high-quality effects in an affordable, easy-to-operate pedal
• Auto Harmony function automatically detects chords played on a connected guitar and generates perfectly matching harmonies, even during mid-song key changes
• Solo singers can create harmonies by manually setting the song key with a dedicated panel knob
• Hybrid mode creates harmonies based on both guitar chord input and the manual key setting, perfect for songs where the guitar part transitions be
• Using one of these three operation modes, it's easy to create perfect real-time harmonies in any key, even if you have no experience with gear or music theory

User questions & answers

Question:	Is the large black rectangle in photos a Foot Switch
Answer:	Yes. That turns the effects or off
Question:	I have a boss acoustic preamp with 2 outputs. Can I send one to this pedal and one to my mixer or does the instrument have to pass through
Answer:	Sorry for the late reply! You can definitely send the pre-amp signal to this pedal; I use a Fishman Model G (old school) pre-amp coming out of my Ibanez acoustic. I gig regularly and don't have a great voice but do backing vocals for my wife. This definitely adds a lot of color to my harmonies and it also pitch corrects. A bit of advice: go for the extra power adapter which does NOT come with the pedal. This thing will eat batteries like you wouldn't believe and if you forget to shut it off, they're toast! Get the DC adapter and never worry about it!
Question:	if you don't plug in a guitar, how do you differentiate between minor / major harmonies
Answer:	All you need is the Major keys. Use your music theory to determine the relative minor/major relationship. ie: Am is also C Maj, Em is also G Maj etc.
Question:	Unit supplies +48v to mic and output goes to mixer. mixer also supplies +48v to all mic input. will there be a conflict and damage mixer and ve
Answer:	I've never used mine with phantom power but if you intend on doing so I would suggest allowing the VE-2 to supply the power to your condensor mic and then run the XLR output of the VE-2 to a regular mic input on your PA.

Product description

In 2012, I had a crazy idea for a tone shaping device that had never been done before in the world of guitar pedals. I wanted to create an effects pedal that replicated the hard to achieve sounds of "direct-in" electric guitar recordings that I loved. Bands like the Beatles, Spoon, WIlco, and Steely Dan had used this technique for years, but it was nearly impossible to recreate live. I wanted this pedal to transform my guitar rig into the tonal equivalent of a Neve studio console, and that was no small task. After lots of trial and error, experimentation, and re-works, this concept evolved into something far beyond what we had imagined. In 2014 as we filmed the first demo videos at Abbey Road Studios in London and this idea had evolved into the most unique product we had ever made. The Colour Box was a full-fledged studio-grade preamplifier, EQ, and distortion generator with multi-instrument compatibility. It did what I had always wanted it to do, but it did so much more! On its release day, I wasn't quite sure how it would be accepted, but I knew that I loved it. As a few months went by, we saw something amazing begin to happen; this pedal was showing up in all types of environments. Producers, engineers, and artists were emailing us, tagging us on socials and showing how they had put the Colour Box to use. Studio vocals, live vocals, kick drums, acoustic guitars, bass, keys, overhead drums, stereo bus's, room mics, synths, re-amps, and some incredibly large stage setups had it on almost every instrument! This unit can be heard on dozens of recordings from U2, Wilco, Beck, Mac DeMarco, St. Vincent, The National, Spoon, Collective Soul, Muse, to War on Drugs, Foo Fighters, and Phantogram amongst others. As proud of this pedal as we were, we wanted to make it better, so we did. – Josh Scott The Colour Box V2 has all the same functionality of the V1 with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics. The most significant improvements are: Addition of an Output transformer Safely Passes 48v Phantom Power EQ Shift Knobs for precision EQ control Hi/Lo Switch for ultra clean headroom 100% available clean signal even on acoustic guitar Silent switching, aka no "switch-pop" Runs on standard 9V DC Neg power Let's take a look at the features and controls of the Colour Box V2. The Gain section in red has three controls: Master, Pre-Vol, and Step. The Master volume controls the overall volume of the unit. The Pre-Vol controls the amount of gain between the two internal gain stages. This acts as a "drive" or "gain" control, adding more grit, distortion, and even fuzz as you increase the gain. The Step control increases the gain of each preamp stage in five stages. Rotating the Step knob from left-to-right will increase the gain by the following: 1st is +18 dB, 2nd is +23 dB, 3rd is +28 dB, 4th is +33 dB, 5th is +39 dB. The Colour Box V2 has a new Hi / Lo switch to control the amount of clean headroom you have available. In the Lo mode, you will easily be able to get ultra clean sounds without breakup. Lo Mode is excellent for tone shaping when distortion is not needed. In the Hi mode, the Colour Box V2 will distort much more readily, giving you a broad spectrum of overdrive, distortion, and fuzz sounds. In addition to the Hi / Lo gain switch, there is a -20dB pad switch on the right side of the Colour Box V2. This function only works when in XLR input mode and can help tame the volume for high output microphones. The EQ section in blue has three new Shift controls correlating to its standard Treble, Middle and Bass controls. The Shift knobs adjust the range of frequencies that the Treble, Middle, and Bass knobs control. The center frequencies for the Shift knobs are Treble 10kHz, Middle 1kHz, and Bass 120Hz, while the Treble, Middle, and Bass knobs boost or cut with +/- 17dB of control. If you want to boost high-mid frequencies, turn the Mid Shift knob to 3 o'clock or above and increase the Middle knob above 12 o'clock. If you want to cut upper treble frequencies, turn the Treble Shift knob to 3 o'clock or above and set the Treble knob below 12 o'clock. The Shift knobs give you precision control over the EQ for anything you put through the Colour Box V2. The Hi-Pass section is enabled by the toggle switch below the Hi-Pass knob. Just flip it up to engage the Hi-Pass knob, which spans from 60Hz to 800Hz with a 6dB per octave slope. The Colour Box V2 has a combination XLR and 1/4" input jack to use either an instrument or microphone. Select your input with the input selector switch on the right side of the pedal labeled INST/XLR. The Colour Box runs on standard 9V DC Negative power and measures 5. 7” x 3. 75” x 1. 85"

• A full-fledged studio-grade preamplifier, EQ, and distortion generator with multi-instrument and microphone compatibility
• The Gain section controls the overall volume of the unit, the amount of gain between the two internal gain stages, and the gain of each preamp stage in five stages
• Using the new Hi/Lo switch, get ultra clean sounds without breakup when distortion is not needed or achieve a broad spectrum of overdrive, distortion, and fuzz sounds
• A -20dB pad switch on the right side of the unit tame the volume for high output microphones when in XLR input mode
• The new Shift knobs in the EQ section adjust the range of frequencies that the Treble, Middle, and Bass knobs control to give you precision control over the EQ
• The Hi-Pass section spans from 60Hz to 800Hz with a 6dB per octave slope
• Offers 100% clean signal even on acoustic guitar, silent switching to eliminate "switch-pop", and passing phantom power to condenser mics

User questions & answers

Question:	Can this be used as a true preamp? sound good if i go guitar -> colour box -> effects loop return
Answer:	Hello, ths is a set for a 12 string and what that means is there are 6 strings and 6 much thinner strings to be played together. The 6 string guitar needs the standard 6 string set for it. I hope this helps you. - PM
Question:	Hi! i i am just about to pay for jhs color box v2 pedal but there is a note "usually ships within 1 to 2 months." what does it mean
Answer:	I just pulled mine off the listing to avoid confusion as well. It appears a seller used the UPC code of a single pack to create a 2 pack listing, and then Amazon merged the two listings because of the same UPC code. Most likely if you order, the sellers at this low price point like myself are offering only a single pack. It's unfortunate when this happens, I will contact Amazon and see if there is any way to fix the listing.

Product features

JHS Pedals Colour Box V2

In 2012, we had a crazy idea for a tone shaping device that had never been done before in the world of guitar pedals. We wanted to create an effects pedal that replicated the hard to achieve sounds of "direct-in" electric guitar recordings that we loved. Bands like the Beatles, Spoon, WIlco, and Steely Dan had used this technique for years, but it was nearly impossible to recreate live.

We wanted this pedal to transform our guitar rigs into the tonal equivalent of a Neve studio console, and that was no small task. After lots of trial and error, this concept evolved into something far beyond what we had imagined. However, as proud of this pedal as we were, we wanted to make it better, so we did.

The Colour Box V2 has all the same functionality of the V1 with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics.

Additional Specifications

The Colour Box V2 has a combination XLR and 1/4" input jack to use either an instrument or microphone. Select your input with the input selector switch on the right side of the pedal labeled INST/XLR.

The Colour Box runs on standard 9V DC Negative power and measures 5.7” x 3.75” x 1.85"

Gain Section

The Gain section in red has three controls: Master, Pre-Vol, and Step. The Master volume controls the overall volume of the unit. The Pre-Vol controls the amount of gain between the two internal gain stages. This acts as a "drive" or "gain" control, adding more grit, distortion, and even fuzz as you increase the gain.

The Step control increases the gain of each preamp stage in five stages. Rotating the Step knob from left-to-right will increase the gain by the following: 1st is +18 dB, 2nd is +23 dB, 3rd is +28 dB, 4th is +33 dB, 5th is +39 dB.

EQ Section

The EQ section in blue has three new Shift controls correlating to its standard Treble, Middle and Bass controls. The Shift knobs adjust the range of frequencies that the Treble, Middle, and Bass knobs control. The center frequencies for the Shift knobs are Treble 10kHz, Middle 1kHz, and Bass 120Hz, while the Treble, Middle, and Bass knobs boost or cut with +/- 17dB of control. If you want to boost high-mid frequencies, turn the Mid Shift knob to 3 o'clock or above and increase the Middle knob above 12 o'clock. If you want to cut upper treble frequencies, turn the Treble Shift knob to 3 o'clock or above and set the Treble knob below 12 o'clock. The Shift knobs give you precision control over the EQ for anything you put through the Colour Box V2.

Hi-Pass Section

The Hi-Pass section is enabled by the toggle switch below the Hi-Pass knob. Just flip it up to engage the Hi-Pass knob, which spans from 60Hz to 800Hz with a 6dB per octave slope.

Hi-Lo Switch

The Colour Box V2 has a new Hi / Lo switch to control the amount of clean headroom you have available. In the Lo mode, you will easily be able to get ultra clean sounds without breakup. Lo Mode is excellent for tone shaping when distortion is not needed. In the Hi mode, the Colour Box V2 will distort much more readily, giving you a broad spectrum of overdrive, distortion, and fuzz sounds.

In addition to the Hi / Lo gain switch, there is a -20dB pad switch on the right side of the Colour Box V2. This function only works when in XLR input mode and can help tame the volume for high output microphones.

Product description

The VO-1 vocoder is a unique and innovative stompbox that puts the massive expressive range of the human voice in the hands of every guitarist and bassist. By vocalizing into a connected mic as you play, it’s easy to transform your tone with electronic voices, classic talk box sounds, and tons of all-new colors that are perfect for modern music styles. It’s even possible to create impressive ensemble vocal sounds without the need to connect an external mic. When you plug into the VO-1, you can literally talk, sing, and Cry with your axe, taking your playing to places you never dreamed of before.

• Works with guitar, bass, or any instrument with a 1/4-inch output
• Use your voice to dramatically extend the expressive range of your instrument in countless ways
• Vintage mode for classic electronic synth-voice sounds and Advanced mode for all-new vocoder tones with enhanced clarity
• Talk Box mode enables “talking lead guitar” tones without the hassles of a traditional talk box setup
• Effect loop for sound enhancement and easy integration with existing pedals

User questions & answers

Question:	Can this work with only a mic input
Answer:	Yes
Question:	What mic input does it take? I can't tell from the picture
Answer:	No. It is meant for a guitarist to rest one foot to be able to hold a guitar easier while seated. It is about the size of the gas pedal in a car.
Question:	does it come with a specific cord for the input
Answer:	The footrest weighs 1 lb 6 oz.
Question:	Can the mic be used regularly (pedal bypassed) ran through the pedal until you want to use the vocoder effects
Answer:	Well, I wasn’t buying the kid in the photo, so I wasn’t really paying attention to that! This footrest is for either foot, though. Pretty sturdy, too!

• 58 types of effect, up to 8 types can be used simultaneously.
• 13 classic amp models with True Simulation of Analog Circuit(TSAC) Cherub's TS/AC technology.
• Vintage 3-band passive EQ modeling for every amp model.
• 6-band graphic EQ designed specifically for electric guitar(120Hz,250Hz,750Hz,1.6kHz,3.2kHz,6.4kHz).
• 11 cabinet models.

User questions & answers

Question:	is ac adapter included
Answer:	yes, it is with ac adapter.
Question:	Can I connect it directly to a mixer to use PA speakers
Answer:	Absolutely. My acoustic sounds great direct. For electric plan on a little deep diving into the q.
Question:	Can it be used with a violin
Answer:	Electric violin would translate to the mode sets
Question:	How do the drum tracks sound
Answer:	please search the videos in youtube. thanks

Product features

MG-100 Multi-Effects Processor

NUX MG-100 offers all guitar effects, including a variety of distortion, compression, modulation, delay, reverb, amplifier and cabinet models. And it comes with a user-friendly interface which you can reach the main controls easily by using Gain, Level and Master knobs on the front. High-Resolution TFT LCD screen allows you to control and adjust everything clear and precise.

It's all about sound. Add in 13 great sounding guitar amps modeling, 58 effects with the ability to use up to 8 of them simultaneously and 11 cabinet models. Plus 56 built-in rhythm accompaniment patterns and an onboard chromatic tuner and loop station, and take your guitar playing to a next level.

Expression Pedal

Built-in expression pedal can be used as a volume pedal or assigned to control any selected parameter in real time.

56 Drum Rhythms, 40 Seconds Looper

Realistic-sounded drums playing the patterns in a variety of different music genres, everything from rock to metal, and from pop to blues.

The rhythm function can also be used with the 40 seconds Looper function allowing you to jam with unlimited overdub layers and countless of hours.

Jacks: Input, Output, Aux In, DC IN

The INPUT Jack also acts as a power switch the plug will be connected/disconnected when the INPUT jack turn on/off.

Connect the input of the guitar amp to the OUTPUT Jack,or inputs of 2 guitar amps to the OUTPUT jack with Y cable.​​

You can also connected stereo headphones to this jack.For proper frequency response,make sure that the MIXER function is enabled when using headphones.

AUX IN can mixture the effect with the MP3/CD document.

Product description

Single-button stompbox gives you a range of stage-ready vocal echo effects in vintage to modern flavors

• Adds a wide range of echo effects for more depth in your vocals
• Mic-Control offers remote on/off via TC-Helicon MP-75 microphone
• Connects between your mic and mixer
• Country of Origin: Thailand

User questions & answers

Question:	Does it take batteries? Or do you have to plug it in
Answer:	â- VoiceTone E1 - main features"Slap" "tap" "FX", etc. equipped with 13 types of echoBy tapping the foot switch according to the rhythm, you can adjust the echo to the tempo of the songAnalog button: You can get a soft echo just like tape eraEasy connection to standard microphone and mixerUSB terminal for computer connection is installed. You can obtain or view firmware updates, product information etc from VoiceSupport applicationMic Control function installed. By connecting the optional TC - Helicon MP - 75 microphone, you can switch the effect on / off directly from the microphone
Question:	This pedal have Phantom Power
Answer:	Connectors, balanced: Mic.: XLR Mic Input Level @ 0 dBFS: -42dBu to +1dBu EIN @ Max Mic Gain Rg = 150 Ohm: -126 dBu Mic input SNR: >104 dB Phantom Power: 24V (always on)
Question:	does the voicetone E1 have a gain feature
Answer:	Yes it does. There is a small dial on the left side. This dial is the gain control.
Question:	Can I tune in an octave harmony on the high side and turn off my low singing
Answer:	VoiceTone E1 gives depth to live vocals with a variety of echo effects.Vocal · echo and slapback are the classic effects for vocals in recording and live performance, giving space to sound. VoiceTone E1 is a handy reachable price range, and these effects were tailored as an effect pedal for simple operation.● VoiceTone E1 - main features"Slap" "tap" "FX", etc. equipped with 13 types of echoBy tapping the foot switch according to the rhythm, you can adjust the echo to the tempo of the songAnalog button: You can get a soft echo just like tape eraEasy connection to standard microphone and mixerUSB terminal for computer connection is installed. You can obtain or view firmware updates, product information etc from VoiceSupport applicationMic Control function installed. By connecting the optional TC - Helicon MP - 75 microphone, you can switch the effect on / off directly from the microphone

Product description

Product Introduction

REVECHO is a compact twin pedal which combines carefully selected delay and reverb effects in one. Additional Tap Tempo control is very convenient for playing with bands. It is characterized by its portable size, user friendly form factor and stunning tone.

Specifications

1.Bypass: Buffer bypass

2.Input: 1/4″Monaural Jack.

3.Output: 1/4″Monaural Jack.

4.Power Supply: DC 9V (Negative in the center, NOT included).

5.Working Current: 100mA.

6.Dimensions: 132(D)*64(W)*45(H)mm.

7.Material: Aluminum alloy

8.Weight: 400g(With box)

Precautions

·Environment:

1.Do not use the pedal in high temperature, high humidity, or subzero environments.

2.Do not use the pedal in the direct sunlight.

·Please do not dissemble the pedal by yourself.

·Please keep the manual for future reference.

Package included:

1 x Donner Revecho Guitar Effect Pedal

1 x User’s Manual

• 1.Convenient compact size.
• 2.LED indicator shows the working state.
• 3.Twin pedal combining delay and reverb effects in one.
• 4.Tap Tempo function for instant delay time control.
• 5.Suitable for any music style.

User questions & answers

Question:	What 9v power adapter do you recommend
Answer:	ISpot is a good basic 9v... If you're using multiple pedals you can usually Daisy chain 2-3 w/o line hum. If running many pedals you may need a true isolated power supply to avoid line noise/him. I will say it's a pretty good little pedal for the price (and easy to squeeze into a tight pedal board)
Question:	Would anyone know and confirm if this is analog or digital delay. how long is the delay time in ms? what about the reverb, is it spring or hall
Answer:	delay is advertised as digital, but there is a degrading echo. to me, it sounds more analog. a digital echo will repeat just like the original sound. this pedal doesn't do that. reverb can be set short like a room, or long like a hall. it doesn't have a spring reverb sound. the way the pedal is setup, the delay is fed into the reverb when both are on. it sounds very good for a $60 pedal.
Question:	Will this add reverb to voice for beater sounding karaoke
Answer:	Most, if not all, pedals for guitar can be used with a 1/4 " jack microphone. The question left is: Is the microphone powered?, does it need a preamp?, or does it create a strong enough signal? Donner has a less expensive reverb that I will reccomend for karaoke. Just find one decent setting and keep it hidden from the singers.
Question:	Can you use the reverb and delay at the same time
Answer:	Yes... Nice little pedal for the price. It also has a separate footswitch for each function - Rev and Delay. I have it on a pedal board alongside Boss and other pedals and it is also nice with a smaller footprint. Only thing is you have to have a 9v power supply for it since it has no internal battery capabilities. I have a couple other Dinner mini pedals too (compressor and a noise gate) and they are pretty good, especially for the price

Product description

Finally a simple Looper pedal for vocals and mic instruments. Ditto mic is for beat boxers, singers with layering and chorale ideas and experimenters who'll loop anything that makes a noise. It's hard to go wrong with only a loop button and stop button so we added a large volume control so your live voice or instrument is always in the foreground. You can even Overdub then undo layers to bring the vibe up and down and your loops are automatically stored even when the unit is off.

• Automatic mic gain control
• Incredibly easy to use mic looper
• 5 minutes loop length with unlimited overdub
• Stop button for noiseless loop clear

User questions & answers

Question:	Doest it saves the last loop when you turn it off and back on again
Answer:	No, a vocoder works by combining a carrier signal and a modulating signal, so with a mic only you will be applying modulation to nothing. It can however work with an input and no mic.
Question:	could I use this with my electric cello
Answer:	There are two inputs. 1/4", or as i call it, a guitar cable, and a three prong microphone cable
Question:	What usb cable do i need to connect to a mac
Answer:	The Boss VO-1 Vocoder Effects Pedal does not come with any cords. The user must supply the 1/4-inch guitar cord, the XLR mic cord, and the 1/4-ich line-out cord. The user may also want to provide 9V power converter and two 1/4-inch shielded cords for an external effects loop. Playing the guitar produces the note and singing or talking into the mic produces the articulation or envelope. The sound produced at the output is not the sound of the guitar; it is a more synthetic somewhat distorted sound which can be adjusted in Blend, Tone, and Color. The loop out can be used to bypass the vocoder effect and output the pure sound of the guitar. Check out https://video.search.yahoo.com/search/video?fr=mcafee&p=Boss+VO-1+Vocoder+Effects+Pedal#id=3&vid=c4e7c3f973092886572c123e9292bd16&action=click
Question:	What microphones are compatible with this looper? My behringer microphone does not work with this device
Answer:	Unfortunately if using the VO-1 Vocoder you'll need to use a separate mic for normal vocals going to front of house. So two mics in front of the performer would be necessary, one for normal vocals and the other for the VO-1 Vocoder. Vocoder sound would emit only from the guitar/bass amp that the VO-1 is connected.