6 best electro harmonix looper pedal

Product description

NANO LOOPER 360 is a compact, affordable, pedal looper with 360 seconds of loop recording time and 11 storable loops!

• 360 seconds of loop recording time which can be divided into 11 different loops for maximum control and flexibility
• High quality sound and unlimited overdubbing with no degradation in fidelity
• Uncompressed audio, 24-bit A/D/A and 44.1kHz sample rate
• User-friendly layout makes recording a loop, overdubbing, undo-redo and erasing a loop quick and easy
• Features a silent momentary footswitch, rugged die-cast package, and includes 9.6DC-200 EHX power supply

User questions & answers

Question:	does it have a memory bank
Answer:	It has 11 memory slots which can store loops. these stay stored till deleted or overwritten.
Question:	Can you power this with a 9 volt battery
Answer:	I just rec'd my nano 360 and it DOES NOT have a provision to use 9 volt battery. Also says USA on outside,made in China on inside.
Question:	Will it work on singing
Answer:	It will work on any sound you put through it. Most mics don't have the 1/4 instrument cable connector, but if you had a converter, something that gave your microphone this type of connector for the output, it would work fine.
Question:	Does this come with a power supply
Answer:	yes. it does, when i bought it (i guess in 2014), comes with a power supply

Product features

Nano Looper 360 Looper

NANO LOOPER 360 is a compact, affordable, pedal looper with 360 seconds of loop recording time and 11 storable loops!

LEVEL Knob

Controls the output level of the Loop. Your dry signal remains at unity signal level from input to output. The dry signal also remains analog throughout the 360.

LOOP Knob

Selects Loop number: 1-11. When scrolling through loops, the MEM LED flashes quickly during transitions. If the loop has no recorded memory, the MEM LED remains off. If the loop has recorded memory, the MEM LED remains on and playback can begin.

RECORD / PLAY Indicator

Product description

With 720 seconds (12 minutes) of stereo recording time on 10 independent loops and unlimited overdubbing, the compact 720 Stereo Looper provides guitarists with an intuitive tool that's perfect for practice and live performance. finding the sweet spot in their wash pedal's sweep. The Cock Fight lets you achieve that cool cocked wash sound without the wash pedal. Tune in the tone you want. Add the built-in distortion for more grind and growl, or switch to the Talking Wah mode for a stuck voice-box sound. If you plug in an expression pedal, you can sweep the Cock Fight for jaw dropping wah and talking pedal effects, with or without distortion!

• 12 minutes of recording time. 10 independent loops.
• Stop, Undo-Redo, Reverse and Half-speed effects at the touch of a button. Loop fadeout (trails) mode.
• Stereo in/out for enhanced usability... record two instruments at once. Silent footswitches.
• Foot controller input lets you use popular 3 button foot controllers (optional) to change a bank up or down and gives access to instant Undo-Redo. modern sound
• Comes with an EHX 9.6DC/200 AC Adapter, also runs on 9V battery and provides extra long battery life. PSU, also works with 9V battery (not included); Kindly find the signal flow diagram on Technical Specification

User questions & answers

Question:	Does this looper have true bypass
Answer:	you could run a bass thru this, I just don't think it would be the best sound for a BASS, I WOULD GO DIRECT !
Question:	how do you delete a saved loop on this pedal
Answer:	Never tried, but I don't see why it wouldn't.
Question:	Does this come with a Power supply
Answer:	It does. Press in both buttons, at the same time to activate it. You will need to watch the video on YouTube to learn how to set up your own sound. This thing is not user friendly when it comes to that sort of thing.
Question:	Can this pedal combine a stereo signal into a mono signal? I want to combine my wet and dry guitar sounds, and not have to get a separate aby pedal
Answer:	The actual answer is: Audio output: OUTPUT/PHONES (stereo). Straight from the manual.

Product description

The Grand Canyon is EHX’s most advanced multifunction delay and looper pedal. It’s equipped with 12 effect types plus a fully featured looper capable of recording and overdubbing the Grand Canyon’s effects. The pedal provides superior sound quality, up to three seconds of delay time, tap tempo and nine tap divide settings, stereo output, 13 presets, programmable EXP pedal settings, high quality analog bypass with soft switching and more.

• 13 Presets

User questions & answers

Question:	Would I be able to plug a microphone into the Grand Canyon to loop an acoustic upright piano
Answer:	Yes. You just need a way to change XLR to 1/4in.
Question:	Can it be used together
Answer:	Yes, looper and delay can be used together or either one separately.
Question:	Does anyone know how many independent loop slots this unit has
Answer:	It's dependent on length, so unlimited up to the max record time. BUT they all have to be the same length as well.
Question:	Is this a good live looper
Answer:	No, not at all. Very small pedal that isn’t really good for live applications at all. However, it sounds great. If you want a quality live looper stick with Boss
Question:	I've been looking for a ts9 replacement that doesn't color tone but still gives a slight mid boost. is this it
Answer:	The EHX East River is an exact replica of the TS808. It will color your sound the way your current TS does. You should try the EHX Soul Food with the gain between 9 and 12 o'clock it will be pretty transparent with a slight mid boost.
Question:	Good for Bass
Answer:	Wow man it's a cool,on a electric guitars,I love it,Sounds great on Fender & Gibson,i did not try on bass guitar,i'd like to say,i have Gibson and Fender and both this guitar has great sound,if u'd like check i'm sending the link from my concerthttps://www.youtube.com/watch?v=q107uhuw0GwThanks
Question:	Stack well with distortion pedals? Big mid hump like the ts9? Thanks
Answer:	As well as stacking with a distortion pedal, I've only tried it along with the DOD 250. The sound was OK but not a great overdrive or gain sound. It has a nice mid sound but it is not a big overdriven sound like a ts9. The reason I this is my favorite pedal is that it has a mild overdriven sound that fits well with lots of music.
Question:	Does this pedal comes with a power supply
Answer:	This unit does not come with a power supply. It uses a standard -9vdc power supply though.
Question:	Has anyone used this on a bass
Answer:	I haven't tried using it with a bass but based on how it works I would assume it will work just fine.Sidenote: this thing works wonders. Especially if you play with a lot of distortion
Question:	I get a lot of f.back while playing. Can this help me decrease the fback
Answer:	I don't know what you consider feedback. I imagine you are talking about noise!This allows you to fine tune and eliminate a great deal of the background noise you get when you are not playing (hum), as well as some while playing. Some guitar brands are noisier than others.Play with it! It's fairly priced and works for me.
Question:	Need to eliminate Feedback from a full hollowbody guitar G2420, when I add fuzz/overdrive/distortion will this do that
Answer:	This works ok with the pedals you mention. It's sensitive so it takes time to get the right adjustment and the adjust you set for overdrive may be too much for a clean setting. I would look at other noise gates as well.
Question:	How can you run the amps effects loop pedals through this gate
Answer:	yes

Product features

East River Drive Overdrive

Electro-Harmonix creates classic overdrive in a JRC4558 IC based pedal that’s as bold as New York City. Symmetrical overdrive adds edge and gain without compromising tone. Volume and Drive take it from sweet to searing while Tone lets you dial in just the right amount of bite to cut through the mix.

No matter how hard you drive it, you’re always in control. True bypass and tone that is absolutely unflinching at a musician-friendly price!

VOLUME KNOB

Sets the output volume of the EAST RIVER DRIVE.

DRIVE KNOB

Controls the amount of input gain. As you turn DRIVE clockwise, the overdrive ranges from mild edge to classic distortion.

TONE KNOB

Emphasizes a range of tones; from bass to treble as the TONE knob is turned clockwise.

• 【LOOPER GUITAR PEDAL】10 minutes of clear looping with unlimited overdubbing. Undo / Redo/Delete function. Super precisely, true bypass. 48Khz 24 bit uncompressed high quality audio.
• 【USB FOR UPLOAD AND DOWNLOAD】Easily Import/Export the music to and from PC, with USB for uploading and downloading.
• 【SOLID CONSTRUCTION】It is make of high-quality zinc alloy.Tiny size, durable and sturdy
• 【SIMPLE OPERATION】Very easy to use, one key to achieve almost all of functions.ONLY support window system

User questions & answers

Question:	Can it be used live
Answer:	I have the two-button version, but yes, totally. I have a TC Electronic Ditto Looper which has one button, and I use it live all the time.
Question:	Can this be used with an acoustic guitar
Answer:	If you have an acoustic electric then yes. The device doesn’t have a microphone so it won’t pick up outside sound. You can purchase a devise that sits inside the acoustic guitar that makes it function as an acoustic electric.
Question:	does it record the guitar or do all recording come from the computer
Answer:	it records anything you play off your guitar by clicking the pedal on to record and off to stop recording, then it loops what you played
Question:	Why can't you record in reverse
Answer:	Why? Can you play in reverse? If you can then it can also.

Product features

Specifications

Working Current: 22mA

on/off LED indicate effect or bybass

LEVEL Knob adjust the the play output volume

INPUT Jack:1/4” mono audio jack,for connecting Guitar

OUTPUT Jack1/4” mono audio jack,outputs the signal

Specifications

DC In power Jack DC 9V (negative in the center)

True Bypass

Footswitch:

Push down the footswitch to toggle between on and bypass statu

Fits for guitar,bass,ukulele,chromatic and violin.

Record/Playback stop/Overdub Delet

How to import the files to PC?

Please download the program from our offical website.

Keep the looper connect with 9V power supply.

Keep looper in SAVE MODE(Green LED on.NO Blinking status)

Connect USB with looper and PC to upload or download

NOTE: Only WAV audio file can be uploaded to the looper from the computer

NOTE:

Please note this pedal can NOT powered by batteries. Need a DC 9V power supply with negative in the center to power up.

Promise

12 months unconditionally solution.

ATTENTION

ONLY SUPPORT WIN XP, WIN 7.

DO NOT UPGRADE SOFTWARE WHEN THERE IS WARNING.

Package includes

1 x Looper Pedal

1 x USB Cable

1 x User manual

Product description

Electro-Harmonix Canyon Delay and Looper Pedal  The EHX Canyon Delay/Looper is much more than meets the eye. Onboard you'll find ten time-based effects, such as a Deluxe Memory Man-style analog delay, a reverb with plenty of control for matching your needs, a 62-second looper, and much more. And they can all be controlled with onboard tap tempo. The four control knobs are FX Level, Delay, Feedback, and the effect selector, and like many other pedals from EHX, the Canyon packs a lot of extra tweakability and tones under the hood. Powerful delay pedal At its heart, the EHX Canyon is an incredibly deep delay pedal for its diminutive size. With a twist of the selector knob, you can choose from eight different delay voicings, including modulated delay, tape-like delay, and even a Shimmer setting. The Tap/Divide button determines the rhythmic subdivisions you'll access by tapping out the tempo. And holding it down changes the function of the control knobs for deep editing parameters such as the repeated signal's modulation, tape age, and more. Onboard 62-second looper The looping effect onboard the Canyon pedal is plenty for practice, songwriting, and even live performance. Simply pull up the loop function and step on the footswitch to start, stop, overdub, and erase your loops. And you can get up to 62 seconds of loop length, which is a ton of time for such a multi-faceted effects device. Reverb and more Electro-Harmonix didn't stop with delay and a looper. They also crammed a great-sounding reverb into the unit. The reverb can be tailored to offer a great hall, room, and spring sound. And adding in a quick delay with low repeats instantly calls to mind the slap-back tones of the 1950s. The reverb on the Canyon sounds so good, it would be well worth the price of admission on its own. 

• .

User questions & answers

Question:	Can you set up a dual delay with the “multi” setting for a quarter note plus dotted eighth delay (like u2?) wish the modulated dmm could do that too
Answer:	Unfortunately I don' t think the Canyon will do a dual delay. It will do dotted eight or quarter not but not both. At least I didn't see it in the manual. I thought U2 was just dotted eighth... but I'm not a U2 expert... Here is the link to the manual: https://www.ehx.com/assets/instructions/canyon.pdf
Question:	I own the awesome deluxe memory man. would this be redundant with what i have, or add something new? nothing beats the dmm
Answer:	I don’t like fidgeting with my pedal board when I’m playing so I have 3 delays on it. I think this is an amazing delay but I primarily use it for the reverse function. Is having 3 delays redundant? Another plus is I can put 3 pedals in the space my old memory man takes up.
Question:	Broken out of box..what to do
Answer:	get in contact with seller. They should steer you in the right direction.
Question:	Is this a digital or analog delay? i'm getting into ambient guitar, want a second delay to go with my deluxe memory man. need a digital
Answer:	I believe this uses digital technology. It has a standard Digital Delay in addition to emulations of Analog Delays. Here is a list of all 11 modes: 1. ECHO: digital delay 2. MOD: modulated delay 3. MULTI: multi-tap delay 4. REVRS: reverse delay 5. DMM: Deluxe Memory Man 6. TAPE: tape delay 7. VERB: reverb plus delay 8. OCT: octave delay 9. SHIM: shimmer 10. S/H: sample and hold 11. LOOP: looper mode w/max loop length of 62 seconds
Question:	Can this be used with out the foot pedal
Answer:	You can use it without the foot pedal, however you will have to use some trickery to select different tracks, and without an interface you won't know which track you are on until you press play. I personally do not have the pedal and I still use this unit a lot for recording and mixing down studio music.
Question:	Does Vienna Teng use this looper on stage
Answer:	Vienna Teng used the previous model (2880) for several years. At some point, she did update to this model (45000). Both loopers function very similarly, but the 45000 has the ability to store 100 different loops to the SD card and has an additional monitor output.
Question:	So each of the 4 channels can only hold up to four loops? Do I understand that correctly
Answer:	No, you can loop forever on all channels. You can use 1 and 2 or 3 and 4 in stereo. Or one track only. You can overdub forever, once you start to layer sounds it gets a great symphonic effect going, different than if you recorded it on a computer track by track. They smush together in a lovely way. So you can record as many sounds on any track. I will start with guitar stereo in 1 and 2, drums stereo 3 and 4, bass in track 3 with drums, keyboard in tracks 1 and 2. The cool thing is, you can record a stereo guitar part, then go back and record a part on 1 and that comes out the left side, a part on 2 comes out the right side, and your first loop is in stereo in 1 and 2.
Question:	Will the sim card store loops in the order of a set list
Answer:	Each loop appears on the SD card as a numbered folder - the number corresponding to the loop number. By plugging the SD card into a PC, you can copy, rename and rearrange the loops/folders in any order you like. So the answer is "yes", if you don't mind getting your hands dirty. I copy the loops off the SD card to my PC and rename them "Lead Guitar Main" or "Lead Guitar Chorus". Later I can copy them back to the SD and call them "50" and "51". I use a spreadsheet to keep track of loop names.
Question:	does this have all of the settings to create a comb filter
Answer:	This is a digital delay pedal, not a filter.
Question:	my setup is guitar>pedalboard>a/b/y switch>1 solid state amp & 1 tube amp. can i run this pedal through both amps' effects loops
Answer:	Probably. I've never run it in stereo and none of my current amps have effects loops so I haven't done it, but I'm sure it's possible. If I'm thinking of this correctly, I think you'd run one of the stereo outs from the pedal to the Send on each amp, then the Returns from the amps could be connected to the pedal's input via a Y connector. I might have that backwards - it's been awhile since I used an effects loop. Either way, you'll likely need at least one Y connector, but it should work. Good luck!
Question:	I'm looking for a looper for ambient music. Is this a great looper, like the Ditto X
Answer:	It’ a great delay pedal, but not a great looper. Ditto X4 is a better looper.
Question:	What power supply does this pedal use? The product description says it comes with a 24DC-100 adapter, but it seems to work on 9v
Answer:	I bought this pedal a few months ago this year. It comes with a standard 9V power supply. I am sorry but I do not remember the current rating at the moment. But the one which came along with mine stopped working after a few days, maybe it was a bad piece. My bad luck probably. The pedal works great. You can use a Boss style standard 9V power supply or even better get a Visual Sound One Spot power supply combo pack. That'll solve most of your pedal power supply problems in general.

Product description

The electro-harmonix Nano Looper 360 lets you record 11 different loops and store them for later recall - that's a lot of looping power in a compact pedal! Guitarists and bassists love practicing with looper pedals to explore new song ideas, and the creative possibilities for live performance are vast. The Nano Looper 360 will reward you with uncolored, dynamic sound thanks to its high-quality 24-bit digital converters. And with a single footswitch for control over record, overdrub, undo-redo, and loop erase, the electro-harmonix Nano Looper 360 is an easy-to-use looper that will become incredibly addictive. While many looper pedals delete all your musical snippets when you power off the pedal, the electro-harmonix Nano Looper 360 can store up to 11 loops and a total of 360 seconds of recording time. That means you can capture song ideas at home, and recall them at band practice to turn them into a complete song. Of course you can use the Nano Looper 360 as a powerful live performance looper, but remember that it's also a valuable practice tool that can help ensure you never lose an inspiring musical idea.

• 1 x Power Supply
• 360 seconds of loop recording time which can be divided into 11 different loops for maximum control and flexibility High quality sound and unlimited overdubbing with no degradation in fidelity Uncompressed audio, 24-bit A/D/A and 44.1kHz sample rate

User questions & answers

Question:	Can it also be jsut powered by a 9 volt dc battery instead of using the ac power supply
Answer:	no
Question:	Can a solo player load backing tracks in mp3 or wav format on the sd? this is a feature of the jml2 from digitech, but not sure of the differences
Answer:	Wav files, yes. Just follow the instructions carefully in the manual. You can also use your own beats as rhythm tracks. I test drove this feature at a gig recently - worked perfectly. Be careful to match your Wav file bpm to the same quarter-note signature as the pedal.
Question:	can you switch loop tracks without the additional foot controller
Answer:	The additional foot controller is optional, so technically you don't need it. It just makes life easier because you don't have to navigate 47 layers of menus using one button and a rotator knob every time you want to switch tracks.
Question:	What kind of usb cable is best with the pedal & can i input any kind of file, wav, mp3, aiff, etc., into the pedal to be used as a loop
Answer:	the usb has a specific kind of input, a certain size, should come with it. as far as file types I would say mp3 for sure, that should be in manual online. fun looper
Question:	Would this be good for live looping complete songs? IE verse, chorus etc
Answer:	This pedal is good for live looping complete songs, but keep in mind that there are only 2 loop channels in each bank, so you would have to 1) perform intros outros and bridges live 2) make the verse and chorus one measure longer and play intros/bridges every time or 3) pre record in 2 banks and switch banks mid song (this would require a short pause).In short, this works very well live, and if you press the button for loop b in sequential mode it will switch to loop b at the end of the current measure, but if you want to select when to play more than 2 sections of a song, the 4 channel 45000 looper might be more well suited (though, with an extra $200 price tag). Good luck and have fun.

Product features

Electro-Harmonix 22500 Dual Stereo Looper

Combining a compact footprint, a comprehensive feature spec and an intuitive user interface, the 22500 delivers powerful looping capabilities in an affordable, easy to use package. It records high quality, non-compressed audio directly to a removable SDHC card (4 to 32 GB) and each card holds up to 100 individual loops. Includes an 8GB card for up to 12 hours of recording time.

Although the 22500 has a compact footprint it is loaded with powerful features:

>Dual Stereo Loops with either independent or locked loop lengths

>Sequential Looping enables verse/chorus switching

>Parallel Looping allows simultaneous playback of two loops

>Selectable Microphone input with adjustable gain and Phantom Power

>Reverse and Octave functions at the touch of a button

>Undo-Redo your last overdub

>Overdub with adjustable feedback amount

>Create loop lengths that are completely free-form, locked to each other or quantized to internal rhythms

>100 Loop Banks per SD Card, each bank containing up to 2 loops

>Rhythm Guide with 16 built-in drum loops

>Footswitch selectable for All Stop, Tap-Tempo, or Rhythm Start/Stop

>USB Port enables backup/restore to PC or MAC

>Includes high capacity SD Memory Card for up to 12 hours of loop time

>Optional external Bank-Up/Down Foot Controller (sold separately)

>9.6VDC/500mA power supply included