14 best bass compressors
A bass compressor is an audio processing device used primarily by bass guitarists to control the dynamic range of their instrument's signal. It is a type of guitar effect pedal designed to compress the audio signal, which means reducing the difference in volume between the loudest and softest parts of the bass guitar's sound. Here are some key points about bass compressors:
Dynamic Range Control: The main purpose of a bass compressor is to control the dynamic range of the bass guitar's sound. It reduces the volume of loud notes and boosts the volume of softer notes, resulting in a more consistent and even output. This can help maintain a steady and balanced sound, particularly when playing with varying playing techniques.
Sustain Enhancement: Compressors can enhance the sustain of bass notes. By compressing the signal, they allow notes to ring out longer, which can be useful for creating a smooth and sustained bass sound.
Attack and Release Controls: Most bass compressors offer controls for adjusting the attack and release times. Attack time determines how quickly the compressor responds to a loud note, while release time determines how quickly the compressor stops compressing after the signal drops in volume. These controls allow musicians to fine-tune the compression effect to their liking.
Threshold and Ratio: Compressors typically have threshold and ratio controls.The threshold sets the level at which the compressor begins to work, while the ratio determines the degree of compression applied to signals above the threshold. Higher ratios result in more intense compression.
Input and Output Level Controls: Many bass compressors feature input and output level controls, allowing users to adjust the overall signal level going into and coming out of the pedal. These controls help match the compressor to the rest of the signal chain and maintain a consistent output level.
Parallel Compression: Some bass compressors offer a parallel compression blend control. This allows musicians to mix the compressed signal with the dry (uncompressed) signal, offering a more nuanced approach to dynamic control.
Noise Reduction: Some compressors include noise reduction features to minimize unwanted background noise and hiss, which can be especially helpful in recording environments.
Use in Pedalboards: Bass compressors are often found on pedalboards alongside other effects like distortion, chorus, and delay. Their placement in the signal chain can affect the overall tone and response of the bass guitar.
Popular Brands: Several manufacturers produce bass compressors, including MXR, Boss, Electro-Harmonix, Aguilar, and more. Each brand may offer different models with unique features and sonic characteristics.
In summary, a bass compressor is an essential tool for bass guitarists, helping to smooth out their playing dynamics, enhance sustain, and maintain a consistent sound. It offers a wide range of controls and can be a valuable addition to a bassist's pedalboard for shaping their tone and dynamics.
Below you can find our editor's choice of the best bass compressors on the market
MXR M87 Bass Compressor Pedal w/ 4 Cables
MXR
Product description
MXR M87 Bass Compressor Pedal
The MXR M87 lets you have complete command on the compression function thanks to the release, attack, ratio, output, and input controls. The built-in Constant Headroom Technology (CHT) provides plenty of headroom, letting your compress the sound without compromising its clean tone. For hassle-free setting up, the MXR has 10-LED gain-reduction meter as a guide. Plus, M87 uses True Hardwire Bypass to keep the low end tight and clean. IT works well without impacting your tone negatively.
TECHNICAL SPECS:
- Bypass: True Hardwire
- Gain: 31dB
- Compression Ratio: 4:1, 8:1, 12:1, 20:1
- Attack Time: 20 to 800-microsecond
- Release Time: 50-millisecond to 1.1-second
- Frequency Response: +/-1dB, 20Hz~20kHz
- Impedance: 1 MOhm Input, 600 Ohm Output
- Max Level: +14dBV Input, +8.5dBV Output
- Noise Floor: -90BV A-wtd
- THD: More than 0.5%
- Power Source: 9V Battery or AC Adapter
- Dimensions: 2.5 x 4.5 x 5.5"
- Weight: 0.84 lb
- 10 gain-reduction status LEDs
- Attack, release, ratio, input, and output controls
- CHT Constant Headroom Technology for clear, clean performanc
- Lightweight, tough aluminum housing
- Pedalboard-friendly footprint
User questions & answers
| Question: | What type of cables does this b=pedal come with? I was just curious if it comes with a quarter inch speaker cable |
| Answer: | Kelly, here are the dimensions I got when I measured. Length is 43.5". Width is 17". Depth is between 4 and 4.5". Hope this helps! |
| Question: | Es original el Pedal |
| Answer: | yes it will fit a jumbo acoustic, really nice bag, bought it for our grandson other guitar that he left with us, so we had to bring it home, did not want to just carry the guitar without storage to keep it safe. |
MXR M87 Bass Compressor Effects Pedal BUNDLE with AC/DC Adapter Power Supply for 9 Volt DC 1000mA, 2 Metal-Ended Guitar Patch Cables AND 6 Assorted Dunlop Guitar Picks
MXR
Product description
Take your favorite studio compressor to the stage with the MXR Bass Compressor. A complete array of controls-Attack, Release, Ratio, Input, and Output-makes it easy to fine-tune your sound, from subtle peak limiting to hard squashed compression effects. Its CHT Constant Headroom Technology gives you plenty of headroom and clear performance. This totally transparent compressor allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the ten, highly visible gain-reduction status LEDs. It's all packed into a durable, lightweight aluminum-housing pedal that's the size of a Phase 90.
- Bundle includes 6 assorted Dunlop picks, 2 patch cables, and 9V power supply
- 10 gain-reduction status LEDs
- Attack, release, ratio, input, and output controls
- CHT Constant Headroom Technology for clear, clean performance
- Lightweight, tough aluminum housing
Seymour Duncan Studio Bass Compressor Pedal Bass Compression Effect Pedal
Seymour Duncan
Product description
Our unique Blend knob and 3 way mini-toggle switch will allow you to select the frequency range of the original uncompressed signal as well as infinitely adjust the amount of "wet" versus "dry" signal that is routed to the output. It's often best to put a compressor at the beginning of your effects chain, but sometimes it can work more efficiently when placed after effects such as an auto wah or envelope filter. You won't do any damage by putting your effects in the so-called wrong order, so feel free to experiment and find what works best for your sound.
- The Studio Bass Compressor is a studio-grade, classic compressor in a user friendly 4 knob format
- Transparent and pairs beautifully with the 805 Overdrive for tight grind
- Designed and Assembled in Santa Barbara, CA
User questions & answers
| Question: | Does it have two variants? Coz the one i ordered doesnt have black input and output. It has chrome instead... Kinda disappointed |
| Answer: | No, it does not come with a power adapter. |
| Question: | Does it come with an ac/dc adapter |
| Answer: | Yes, we ship most any effects pedal out via USPS Priority Mail, which from Texas is 1-3 days delivery time to most all of the continental US. Brian Meader Sales Manager The Guitar Sanctuary |
| Question: | Is unit also battery powered |
| Answer: | More of a light red. I wondered about that also when I bought it, but it’s more of a red than what the stock photo shows. Otherwise it looks exactly like what you see. |
| Question: | Does it come with AC adapter |
| Answer: | This bundle includes 2 6" 1/4 inch patch cables and 2 18.6' 1/4 inch instrument cables. Thanks! |
MXR M87 Bass Compressor
MXR
Product description
MXR's M87 Bass Compressor puts studio-grade bass compression right on your pedalboard! You'll love how the M87 puts you in complete command of compression functions, thanks to attack, release, ratio, input, and output controls. The built-in Constant Headroom Technology (CHT) ensures plenty of headroom. You want your bass to retain its character, even during the most energized moments. The M87's transparency never lets the compression compromise your sound. Ten easy-to-see gain-status LEDs let you know when the compression threshold has been reached. Take studio-quality bass tones to the stage, with the M87 Bass Compressor! MXR M87 Bass Compressor Pedal Features: CHT Constant Headroom Technology for clear, clean performance True bypass 10 gain-reduction status LEDs Attack, release, ratio, input, and output controls Lightweight, tough aluminum housing Pedalboard-friendly footprint
- CHT Constant Headroom Technology for clear, clean performance
- True bypass
- 10 gain-reduction status LEDs
- Its CHT Constant Headroom Technology gives you plenty of headroom and clear performance
- The totally transparent M87 Bass Compressor allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the ten highly visible gain-reduction status LEDs
User questions & answers
| Question: | Does this pedal use only 9 volt battery , I don't see a plug for an A/C adapter |
| Answer: | Subes original |
| Question: | I'm torn between this and the keeley bassist...does this pedal produce sustain? (the keeley reportedly doesn't |
| Answer: | Hey, there is no manual for this pedal. |
| Question: | I have to turn input vol and bass guitar vol almost all the way up to light more than a couple leds. is this common? using passive p-bass |
| Answer: | I think it would work but it would probably lose the higher tones. It is designed to match the range of a bass. |
| Question: | What are the actual dimensions of the compressor? (The dimensions listed above are clearly incorrect) A Phase 90 is about 4-3/8"x |
| Answer: | Yes, It works with 9V DC center negative power adapter or a 9V battery |
Ampeg Opto Comp Bass Compressor Pedal White, Opto-Comp
Ampeg
Product description
The Ampeg Opto Comp Analog Optical Compressor pedal utilizes an optical circuit to deliver smooth, vintage style compression to add headroom and sustain to your guitar or bass. Dial in a fast, subtle style to control peaks or crank up the compression to add a unique character. Featuring a roadworthy all-metal chassis and true bypass switching, the Opto Comp Optical Compressor brings your tone to new heights.
- Delivers smooth, vintage style compression
- Dial in the perfect sound with compression and release controls
- Output control maximizes Sustain and makes up for heavy compression
- True bypass, analog design with incredible signal-to-noise ratio
Product features
Opto Comp Analog Optical Compressor
The Ampeg Opto Comp Analog Optical Compressor pedal utilizes an optical circuit to deliver smooth, vintage style compression to add headroom and sustain to your guitar or bass. Dial in a fast, subtle style to control peaks or crank up the compression to add a unique character. Bring your tone to new heights with the Opto Comp Analog Optical Compressor.
Scrambler Bass Overdrive
The pedal infuses your sound with authentic Ampeg grit, grind and sag. Dial in a huge range of overdrive from subtle to screaming. Add in a touch of highs, then blend in with your dry signal to create the perfect tone. It’s pure analog Ampeg overdrive that’s super affordable.
Opto Comp Analog Optical Compressor
The Ampeg Opto Comp Analog Optical Compressor pedal utilizes an optical circuit to deliver smooth, vintage style compression to add headroom and sustain your guitar or bass.
Liquifier Analog Chorus
The Ampeg Liquifier Analog Chorus pedal delivers incredibly rich tones thanks to its dual chorus circuit design. Experience classic dreamy chorus or turn it all the way up to transport your tone to a new dimension. Get the lush sounds you’ve been dreaming of with the Liquifier Analog Chorus
Classic Analog Bass Preamp
The Ampeg Classic Analog Bass Preamp pedal is like having a choice of Ampeg amps right on your pedal board. Dial in a wide range of authentic Ampeg tones with the 3-band tone stack and highly flexible Ultra-Hi and Ultra-Lo circuits. It’s the most affordable way into the pure analog bass tone of Ampeg.
SCR_DI
The Ampeg SCR-DI Bass DI with Scrambler™ Overdrive combines a classic Ampeg preamp, EQ pedal and overdrive stomp box in a rugged design built to deliver legendary Ampeg tone in any situation. It’s perfect for driving your rig, sending your tone to front-of-house or for solo, silent practice.
JOYO JF-10 Dynamic Compressor Pedal Effect Re-create Classic Ross Compressor Pedal for Electric Guitar Bass Sustainer Pedal
- The JOYO Advantages: over 14 years of brand history, strong technical teams, many innovative patents, electroacoustic core technology, guide design of music masters, winning the love of global fans, inspiring people's music dreams.
- JF-10 dynamic compressor features a re-creation of the classic ross compressor, with very low noise. True bypass design minimizes tone loss.
- With three adjustment knobs, sustain, attack and level. The attack adjustment is designed for bass or high-output active pickups to better suit the instruments.
- Aluminum alloy casing with stoving varnish finish, simple design and interface, quality components, sensitive knobs.
- What You Get: JOYO JF-10 compressor pedal, detailed operating instructions and excellent customer service.
User questions & answers
| Question: | can a battery fit inside the compressor pedal |
| Answer: | Yes, you need 9v 6F22 battery, thank you for the question. |
| Question: | Is this item easy to use |
| Answer: | Yes, you can find a lot of videos on Youtube, search JOYO JF-10 Dynamic compressor. |
| Question: | Is there any low end loss when used on bass |
| Answer: | Hello customer, we recommend this pedal for electric guitar but if you want to use it to the bass, the low end will loss a bit, however, you can add the volume from EQ of the amplifier. Thank you! |
| Question: | does it come with a power cord |
| Answer: | Hello customer, the gears is sold directly by JOYO and the original package is not with the cord, just as the other brands in the market, if you want the power cord, you can also purchase in our store, thank you! |
Product features
Product Details
Product Details
Product Details
Product Details
Boss CS-3 Compressor/Sustainer Pedal
BOSS
Product description
The CS-3 Compression Sustainer pedal compresses louder signals while boosting lower signals, providing smooth sustain without degrading the original sound quality. This is the perfect pedal for guitarists and bassists who want to sound their best.
- The CS-3 Compression Sustainer pedal compresses louder signals while boosting lower signals.
- Guitar Pedal
- Boss
User questions & answers
| Question: | Will this pedal reduce any unwanted noise coming out of the amp |
| Answer: | No, if anything it will add noise. There's always gonna be a little bit of noise from an amp... maybe try a noise gate or Humbucker, or noiseless pickups. Good luck |
| Question: | Will this sustain pinch harmonics so I can do a dive bomb |
| Answer: | It should - it definitely extends the sustain and harmonics on my guitars, using it through a Fender Twin Reverb or an old Peavy with a Marshall head. However, that is not really my style of playing (the dive bombs), so I can't give you a definitive answer. It will also depend on your amp setup and the guitar. What I can say is that this box does thin the sound a little, making it more sterile. |
| Question: | Will this sound plesant on an acoustic guitar |
| Answer: | Not designed or used with acoustic instruments. Certainly not pleasant. Its a rock sound like Carlos Santana sustained notes in his solos. |
| Question: | I have overdrive, distortion, & metal zone pedals in front of amp & eq, chorus, & delay pedals in the effects loop. where should i place the cs |
| Answer: | You're going to want to have the compressor going into the front of the amp. As far as where you place it in your chain depends on what you're trying to get out of you cs-3. The best thing to do is experiment around with it. Try placing it at the beginning or end of your pedal chain, or later in the chain between , before, or after your distortion pedals, The placement can really change your tone drastically. |
Product features
BOSS CS-3 Compression Sustainer Pedal
The CS-3 Compression Sustainer pedal compresses louder signals while boosting lower signals, providing smooth sustain without degrading the original sound quality. Onboard Level, Tone, Attack and Sustain controls for precise tonal shaping, and the low-noise design allows super-quiet operation. This is the perfect pedal for guitarists and bassists who want to sound their best.
Darkglass Electronics Hyper Luminal Hybrid Compressor Guitar Effects Pedal
Product description
The Hyper Luminal Compressor features the first hybrid design in a compressor pedal: an analog VCA controlled by a digital side-chain allowed us to capture and include the characters of some of the most legendary compressors in history while keeping the signal path completely analog.USBA Micro USB B connector allows you to connect the pedal to PC/Mac to set Time settings, parameters, and future firmware upgrades via the Darkglass Suite.BlendMixes the clean and effected signals. Unlike our distortions, it is placed before the Output control. So the Hyper Luminal can also be used as a transparent booster with this control at minimum.TimeSets the time constants (Attack and Release). You can use the Darkglass Suite to fine tune and custom map the time constants, you can also assign different behaviours for each Mode.Features:Hybrid Compressor DesignThree Different Modes: BUS/FET/SYMBlend/Time/Output/Compression KnobsConnects to Darkglass Suite via Micro USBRuns on 9V DC Power Supply (Not Included)Get your Darkglass Electronics Hyper Luminal Hybrid Compressor Bass Effects Pedal today at the guaranteed lowest price from Sam Ash with our 45-day return and 60-day price protection policy.
- A Micro USB B connector allows you to connect the pedal to PC/Mac to set Time settings, parameters, and future firmware upgrades via the Darkglass Suite.
- Output- Sets the overall output volume of the unit.
- Ratio- Adjusts the amount of compression.
- 1 x 1/4" Input
- 1x 1/4" Output
User questions & answers
| Question: | Does this come with a power adapter |
| Answer: | The zipper broke just in few tries-ended buying a new hard cover |
| Question: | Hello, can you send two day shipping |
| Answer: | 47" X 14" at the body |
Guitar Effect Pedal for Bass
- Two modes of normal compression and treble compression, the compressed sound is mellow and full of musicality, perfectly retaining the original guitar sound.
- Two modes of normal compression and treble compression, the compressed sound is mellow and full of musicality, perfectly retaining the original guitar sound.
- Aluminum alloy shell, mini compact appearance, slender body, uniform and simple atmosphere
- A guitar compressor that uses advanced MDP technology to maintain musical expression
- We provide very reasonable prices to match high-quality products, you will not regret it.
Product features
Classic Design
The setting of foot pedal eliminates the need to operate while playing, just concentrate on your performance.
Solid Quality & Easy Carry
This compresso pedal has a small size body, light weight, suitable for out side gigs.
Easy to control:
There are two function knobs, namely LEVEL and COMP, you only need to control the two function knobs, and then select the model you want to make your own music tone. Enjoy your own colorful life.
Easy to Connect
Using the power adapter to connect to the power terminal, and at the same time use the guitar cable to connect the guitar to the input terminal, and the output terminal can use the guitar cable to connect the guitar amplifier.
Compressor Guitar Pedal
The compression guitar pedal has a smooth and powerful compression effect, and is made of a durable metal shell. The size is very small. Just use the boost switch to switch the button, you can go from clean to powerful compression sound.
SanJune GB-CPX Optical Compressor Guitar and Bass Effects Pedal Mini Size
- This GB-CPX is a professional studio compressor in compact pedal format. It takes an instrument such as an electric guitar or bass guitar. Amplifies & compresses it and restores average volume after compression.
- Simple to use yet extremely powerful, the gb-cpx will give the gloss of a professional studio production to all your performances. It is equally at home both live and in the studio.
- The PhotoOptical compressor is what gives GB-CPX unique character. It makes an instrument sound denser and playing seem more even for “produced” results.
- Mini size, this pedal doesn’t accept a battery, it requires a standard 9V DC power supply (not included).
- Quality assurance, SanJune always stand behind our products with one-year guarantee.
Product features
Treat yourself and your ears by getting SanJune pedal!
In the life of every electric guitarist, effect pedals start to become important to your music sound, if you are looking for something affordable, versatile and portable that does the job and takes only a little space on your pedalboard, then SanJune guitar effect pedal is a must have and perfect companion for an easy playing and enjoying music life. It's meticulously crafted and housed in such a tiny metal box to sustain from normal use for a long period of time. Seriously, you cannot imagine how fantastic the sound is until you get one!
Compressor Guitar Pedal, Mini Effect Processor Fully Analog Circuit Universal for Guitar and Bass, Exclude Power Adapter - KOKKO (FCP2)
KOKKO
Product description
Specifications:
- Brand: KOKKO
- Model: FCP2 COMPRESSOR(Mini)
- Main Material: Aluminum Alloy
- Input Impedance: 1M Ohms
- Output Impedance: 10K Ohms
- Power Supply: External AC adapter delivering 9V DC regulated minimum 300mA
- Item Size: 9.4cm * 5.1cm * 5.3cm
- Item Weight: 180g
- Package Size: 11cm * 7.1cm * 6.7cm
- Package Weight: 214g / 7.5oz
Package List:
- 1 * Guitar Effect Pedal
- 1 * User Manual(English)
Note:
- Please do not use the pedal in high temperature, high humidity or subzero environments.
- Please do not use the pedal in the direct sunlight.
- Please do not dissemble the pedal by yourself.
- Please keep the manual for future reference.
- EFFECTS - Fully analog circuit. True bypass.A broader adjustable range.
- LED INDICATOR - LED indicator shows the status of effect. No battery, Powered by AC adapter(not included).
- ANTI SKID - Rubber pads on the backside is anti-skid, which enhances the stability and avoids friction.
- RELIABLE QUALITY - High quality by aluminum alloy which is durable and have a classic mini size brings you a musical feast.
- RESONABLE PRICE ? Provided the very reasonable price to match the high quality product, you will not regret it.
User questions & answers
| Question: | Is this optical, vca, or fet compression |
| Answer: | It's said to be a Dynacomp clone which would be a CA3080, which would be a pretty generic op amp circuit, probably jfets on a chip. |
| Question: | What exactly does a compressor pedal do |
| Answer: | It makes soft sounds louder to get to the same volume as louder ones, evening out your playing. Consider how you can hit a low note on a bass that can rattle your teeth but hitting a note on a higher string seems to have little impact. Turn the compressor on and it all is very even. It will also make your tone have more of an expressive attack. |
| Question: | Works great on bass |
| Answer: | I purchased this for my bass-and it totally rocks-super tone and quality for the price-have other pedals that have cost three times the price, and this little boss is worth it!💯👌 |
| Question: | Whats the difference between compressor and distortion |
| Answer: | They are totally different effects. Compression evens out your signal. It raises any weak part of your guitars output and squashes the top end to give you a more even balanced sound. This can also give you a bit more sustain. You may not even notice it's on but it does give you nice control of your overall signal to the amp. Distortion gives you a raged raw grunge sound that blurs your notes in chords and adds a hard attack to singular notes. There are also Overdrive pedals that allow you to get the sound of an amp cranked way up but at a lower volume. All are different. Use YouTube to search examples of all three types of pedals. |
SanJune GB-CP Optical Compressor Guitar and Bass Effects Pedal, Red
- This GB-CP is a professional studio compressor in compact pedal format. It takes an instrument such as an electric guitar or bass guitar. Amplifies or compresses it and restores average volume after compression.
- Simple to use yet extremely powerful, the gb-cp will give the gloss of a professional studio production to all your performances. It is equally at home both live and in the studio.
- The PhotoOptical compressor is what gives GB-CP unique character. It makes an instrument sound denser and playing seem more even for “produced” results.
- Due to Its Mini Enclosure, This Pedal Does not Accept a Battery, It Requires a Standard 9V Power Supply Which is Not Included
- Quality assurance, SanJune always stand behind our products with one-year guarantee.
User questions & answers
| Question: | Can I use it as insert on my mixer for vocals |
| Answer: | No it doesn’t. But good idea. I should sew one in mine. |
Product features
Treat yourself and your ears by getting SanJune pedal!
In the life of every electric guitarist, effect pedals start to become important to your music sound, if you are looking for something affordable, versatile and portable that does the job and takes only a little space on your pedalboard, then SanJune guitar effect pedal is a must have and perfect companion for an easy playing and enjoying music life. It's meticulously crafted and housed in such a tiny metal box to sustain from normal use for a long period of time. Seriously, you cannot imagine how fantastic the sound is until you get one!
Dunlop Crybaby GCB-95 Classic Wah Pedal Bundle with 2 Patch Cables and 6 Assorted Dunlop Picks
MXR
Product description
You've seen it. You've heard it. But do you have one? This is the original Dunlop Cry Baby wah pedal. It's the one that's joined legions of legendary guitarists onstage since the dawn of rock... from Hendrix to Clapton and far, far beyond. Mount this one on your pedalboard and you'll never regret the decision: this is the one and only wah you need to conjure up classic tones or dive in a new direction of your own. Featuring a heavy-duty die-cast construction for years of stomping, rocking, and tear-shedding (and sometimes shredding) the Dunlop Cry Baby wah pedal is a pedalboard classic.
The Cry Baby Wah is the most iconic guitar effect in music history. When it hit the scene in 1966, it added a whole new layer of expression to the electric guitar-players such as Jimi Hendrix and Eric Clapton used the Cry Baby Wah to create some of the most timeless sounds in rock.
The GCB95 is a modern interpretation of that sound, featuring the lush, expressive character of the legendary red Fasel inductor with a more focused high end and a more aggressive and accentuated wah sound. With a heavy-duty die-cast housing and a sturdy pot, the Cry Baby Wah will withstand years of playing.
- The original Dunlop Cry Baby Wah effects pedal
- Used by greats — from Hendrix to Clapton to Gilmour and beyond
- Heavy-duty diecast construction for years of reliability
- 100K ohm Hot Potz potentiometer that allows for that quick, abrupt wah sound
- Bundle includes 2 6-inch right angle patch cables and 6 assorted Dunlop picks from the PVP101 pick pack.
User questions & answers
| Question: | Does it come with the electrical adapter |
| Answer: | No you will need to use an optional 9v power supply |
| Question: | will this work with a steel guitar |
| Answer: | Yes. I have never seen it done or heard it though. 🥴 |
| Question: | Shipping to Australia, what adapter would work |
| Answer: | PW-CT-9V DC Planet Waves adapter center negative. |
| Question: | What is the power supply for this pedal |
| Answer: | The Dunlop GCB-95 Crybaby can be powered by one 9 volt battery (accessed via the bottom of the pedal), a Dunlop ECB003 AC Adapter (ECB003E in Europe), or a Dunlop DCB10 DC Brick power supply. |
MXR Dyna Comp Bass Compressor Effect Pedal (M282)
MXR
Product description
The dyna Comp bass compressor delivers the most iconic compression sound in music history, tweaked and tuned just for bass players. Built around the classic CA3080 “metal can” integrated circuit for its quiet operation, superior transparency, and increased dynamic range, this pedal comes with all the controls you need to shape that sweet dyna Comp swish in no time at all. The standard dyna Comp compressors tend to SQUASH the dynamics of a bass signal, depriving bass players of the transparency required to let the low end fundamental stand out. The MXR team equipped this pedal to overcome both challenges with a clean control that adds in your unaffected signal to maintain low end integrity and a tone control that adjusts the upper midrange to retain tonal dynamics. Familiar output and sensitivity controls set volume level and the length of sustain, while the attack switch toggles between a slow vintage style attack time and a fast modern style attack time that instantly adds punch and clarity. And you know what? It all comes in an MXR Mini housing, so making room for it on your pedalboard will be a cinch.
- The classic Dyna Comp compressor sound re-tuned to retain the low end, dynamics, and transparency that bass players require familiar output and sensitivity controls set volume level and the length of sustain includes Dunlop ECB003 9-volt AC adapter
- The Package heigt of the product is 2.5 inches
- The Package Length of the product is 5.5 inches
- The Package Width of the product is 4.5 inches
Latest Reviews
View all
Microphone Stands
- Updated: 26.02.2023
- Read reviews
Alfie Grooming Scissors
- Updated: 23.02.2023
- Read reviews
House Water Filter System
- Updated: 22.07.2023
- Read reviews
Iron Rich Cereals
- Updated: 31.03.2023
- Read reviews
Budget Knife Sharpener
- Updated: 03.02.2023
- Read reviews