14 best guitar pre amps

Product description

The Ampeg Classic Analog Bass Preamp pedal is like having a choice of Ampeg amps right on your pedal board. Dial in a wide range of authentic Ampeg tones with the 3-band tone stack and highly flexible Ultra-Hi and Ultra-Lo circuits. It’s the most affordable way into the pure analog bass tone of Ampeg.

• Delivers a wide range of authentic Ampeg tones
• Classic 3-band tone stack plus volume
• Ultra-thin and ultra-lo circuits for tonal flexibility
• True bypass, analog design with incredible signal-to-noise ratio
• Roadworthy all-metal chassis construction

Product features

Ampeg Classic Analog Preamp

The Ampeg Classic Analog Bass Preamp pedal is like having a choice of Ampeg amps right on your pedal board. Dial in a wide range of authentic Ampeg tones with the 3-band tone stack and highly flexible Ultra-Hi and Ultra-Lo circuits. It’s the most affordable way into the pure analog bass tone of Ampeg.

Ampeg Liquifier Analog Chorus

The Ampeg Liquifier Analog Chorus pedal delivers incredibly rich tones thanks to its dual chorus circuit design. Experience classic dreamy chorus or turn it all the way up to transport your tone to a new dimension. Featuring a roadworthy all-metal chassis and true bypass switching, the Liquifier Analog Chorus delivers all the lush sounds you’ve been dreaming of and more.

Ampeg Opto Comp Analog Optical Compressor

The Ampeg Opto Comp Analog Optical Compressor pedal utilizes an optical circuit to deliver smooth, vintage style compression to add headroom and sustain to your guitar or bass. Dial in a fast, subtle style to control peaks or crank up the compression to add a unique character. Featuring a roadworthy all-metal chassis and true bypass switching, the Opto Comp Optical Compressor brings your tone to new heights.

Ampeg Scrambler Bass Overdrive

The Ampeg Scrambler Bass Overdrive pedal infuses your sound with authentic Ampeg grit, grind and sag. Dial in a huge range of overdrive from subtle to screaming. Add in a touch of highs, then blend in with your dry signal to create the perfect tone. It’s pure analog Ampeg overdrive that’s super affordable.

Ampeg SCR-DI Bass DI with Scrambler Overdrive

The Ampeg SCR-DI Bass DI with Scrambler Overdrive is a true Ampeg preamp, delivering a wide range of Ampeg tone perfect for the stage. The classic Ampeg EQ offers additional tonal control including Ultra-Hi and Ultra-Lo tone shaping. Plus, you can dial in tube-like grind with the all-new Bass Scrambler overdrive. The SCR-DI has all the connections to get Ampeg tone out of any rig and send it all to front-of-house to ensure the audience hears your tone. With a built-in headphone out and aux in for practicing along with backing tracks, the SCR-DI is also a fantastic practice tool that can fit right into your gig bag.

• An analog acoustic preamp with digital effects and looper function.
• with Reverb and Chorus effects and, each effect designed to control by only one-knob.
• Versatile Preamp,you can optimize the preamp input according to your guitar pickup type, you can set Piezo or Magnetic for better signal processing.
• 3-band EQ (Bass, Middle and Treble),60 Seconds Looper
• Notch Filter ON/OFF Toggle Switch with Precision Adjustment Control,XLR DI Output

User questions & answers

Question:	Phantom power
Answer:	No.
Question:	Can this pedal mute its output? (For example, when tuning
Answer:	this pedal has no mute switch.
Question:	Does this come with power supply
Answer:	this pedal is without power supply. Any power supply for guitar effects is ok for it.
Question:	where are they manufactured
Answer:	Cherub Technology in China,

Product features

Improved Clarity,One-Knob Control High-Quality Effects

Improved Clarity

NUX Stageman Floor is an analog acoustic preamp with digital effects and looper function. Preamp featured with a highly sensitive 3-band EQ with MID scoop toggle switch, adjustable notch filter, and input gain control. And it provides a ginormous headroom which delivers the sound all natural.

One-Knob Control High-Quality Effects

It equipped with Reverb and Chorus effects and, each effect designed to control by only one-knob, when you tweak the chorus or reverb knob from 0 to 10 it adjusts multiple parameters with a perfect balance. And the chorus switch is a momentary footswitch, while you push and hold, it will activate the freeze effect until you release it.

Notch Filter

You can turn ON the notch filter and adjust the frequency to clean the notch sound caused by a guitar pick or nails.

Versatile Preamp

Also, you can optimize the preamp input according to your guitar pickup type, you can set Piezo or Magnetic for better signal processing. And it has the FX Loop input, you can use a TRS cable and connect any effect unit to Stageman Floor. When you push both footswitches, Stageman Floor turns into a looper pedal with 60 seconds recording capacity and unlimited overdubs.

Its also the best choice for various acoustic instruments like the violin, mandolin, banjo and many more.

Connections

Stageman Floor has all the useful input/output connections.

• 7 different preamp models that cover a wide variety of classic and modern guitar tones.
• Every preamp model has two channels with a saveable preset slot for each preamp.
• Built-in cabinet simulation allows users to connect directly to mixer/PA system.
• Footswitch can be used to switch channels or to toggle pedal ON/OFF. ONE-YEAR GUARETEEN.

User questions & answers

Question:	Can this be used a regular guitar pedal plugged into the input jack of a clean channel amp
Answer:	No, the FS06 is designed as the digital preamp pedal, recommend not to use wiht the INPUT of amplifier directly to avoid unexpected tone issues.
Question:	Can you turn the cab sim off
Answer:	Yes! Press the SAVE button and footswitch simultaneously to turn on/off the cabinet simulation. The footswitch LED will blink slowly when the cab sim is on. The LED will not blink when the cab sim is off.
Question:	Can this be used with an acoustic bass guitar
Answer:	No, it's designed to be used with electric guitar.

Product features

Editing/Save preset

Rotate the BASS, MID, TRE, LEVEL, GAIN knobs to edit the tone of the currently selected

preamp model. When any change is made from the saved preset, the LED indicator will

blink slowly indicating the change has not yet been stored. Press and hold the SAVE

button to save current settings. The LED will blink rapidly indicating save has been

successful. Pressing SAVE button once will change to the next preamp model without

saving.

Effect List

Product description

This is a pre-amp unit, perfect for mounting directly into the side of your standard acoustic guitar or cigar box guitar.

For standard acoustic guitars, this Curve pre-amp gives you an on-board equalizer and volume control and helps boost and clarify the signal before it goes to your amplifier. For cigar box guitars, using a FLAT pre-amp is guaranteed to make your CBG sound better, compared to wiring a piezo straight to a jack.

The rod-style piezo can be built to go under the saddle on standard guitars, and can be built into a bridge or placed directly under the bridge for optimal vibrational pickup on cigar box guitars.



Specifications:

Flange measurements: 4 1/16" L x 1 3/4" W

Fits a hole of size: 3 3/4" L x 1 9/16" W

Presence Control: ±12dB at 8KHz

Bass Control: ±12dB at 600Hz

Middle Control: ±12dB at 600Hz

Treble Control: ±12dB at 2.2KHz

Input Impedance: 10MΩ

Frequency Response: 20Hz - 20KHz

Power: 9V alkaline battery (not included)

Pickup dimensions: 4 x 1.9 x 2.4inches



Package List:

1 * 4 Band EQ Equalizer

1 * End Pin Jack

4 * Mounting Screws

1 * Screw Cap



If you have any question please contact us, we will solve it for you quickly.

• Included rod-style piezo transducer pickup, attaches via small jack plug so it can be removed if desired
• Mono 1/4" jack with an automatic "off" circuit that turns the pre-amp off when the cord is unplugged
• Controls for volume, bass, mid-range, treble and pres,Built-in battery holder for 9-volt battery (not included)
• Can be easily fitted into your acoustic and cigar box guitars ,it is essential to electrify and amplify their sound

User questions & answers

Question:	Will this replace a Fender Classic 4 by Fishman
Answer:	No this will not work because of where it is positioned on the guitar if look at the fender classic it is flat square as apposed to this one whitch is arched this one is positioned on a curved section of the body where as the classic fits on a flat surface section. I hope this answers your question if you have any more inquiries feel free to ask me any time if i have an answer Ill give it if I don't I can find out fairly easily for you. Take care and good luck with the guitar I'm sure you figure it out and be jammin in no time.
Question:	does this unit come with everything pictured. I ordered this and did not receive the piezo or mounting screws
Answer:	I did not get screws either
Question:	does this work on a classical/spaniard
Answer:	YES,It works on a classical/spaniard.
Question:	I'm assuming this takes a 9v battery. Does polarity matter? Its not marked anywhere
Answer:	It does take a 9v battery and yes, polarity will matter.

• Level and Drive controls add incredible range.
• Modeling achieves famous VOX AC-30 tone.
• Distortion is warm and natural, with subtlety in mind.
• 6 knobs allow complete control over pedal dynamics.
• 6 knobs allow complete control over pedal dynamics
• Quality components, bypass feature with 9V battery (Not included).

User questions & answers

Question:	Could I plug this into my computer and use audacity to record
Answer:	If you have a recording interface, you should be able to just plug from the quarter inch out on the Joyo to the quarter inch in on the interface.If you are using the computers 3.5 millimeter input, just make sure you do trial run or two to set the Joyo's Level control so that it doesn't distort the pc input. You may also need adapters or cables to fit the actone and pc jacks in order use them together.
Question:	Can you bypass the cabinet simulator? is there a switch for that? (in case i want to use it with a guitar amp instead of direct to pa
Answer:	Oh yeah, for bypassing the simulator you press on the switch and it turns the pedal off/on. you can use this as a preamp or a drive to get the AC flavour. The pedal itself isn't a cab simulator but more so copies the AC variety like a Drive pedal. The voice knob is the control for shaping the sound of the amp styles (inside the pedal) (I personally enjoy having the voice at 10o'clock.) I think this will do fine going into your chain and out to an amplifier. Hope this helps!
Question:	I was wondering how much signal gain/boost this pedal is capable of? Looking to get an instrument level close to line level to feed a headphone amp. TIA
Answer:	I'm not sure on a technical level how much signal boost this pedal can provide, and I've seen nothing online either, but I've used it straight into a PA without a guitar amp (it's an amp simulator so that sounds pretty good) and it had more than enough signal to work with.
Question:	hi...is this good for bass
Answer:	Ran bass through it straight into the PA. Turned effects off and it sounded really good. Used for worship. Typically play guitar and have several pedals on my board with this the last pedal on board. Bypassed all pedals for bass. Ran bass into the input and out to the PA.

Product features

JOYO AC Tone Vintage Tube Amp Sim Pedal

JF-13 AC Tone guitar effect pedal based on the AC-30 tube amplifier that with a little help from two mop-top multi-instrumentalists, revolutionized the electric guitar sound, JOYO AC Tone pedal really rocks our age.

The JOYO AC Tone pedal really captures something usually missing from most modern guitar sounds: subtle to aggressive warmth and a natural sounding overdrive. with the unique "Voice" control you can dial in never before heard tones.

Distortion is warm and natural, with subtlety in mind

JOYO AC TONE has 6 knobs! many combinations are possible. This pedal can make your clean sound sparkle by thickening the mid range and adding as much top end bite as you can take (or take away), while the distortion it offers is straight out of the USSR.

Featuring endless controls, bypass wiring and components of only the highest quality, the pedal can put in more than a hard day's work.

Level and drive controls add incredible range

Level and Drive controls add incredible range, while the 3-band EQ offers even more flexibility when it comes to getting an original sound.

JOYO JF-13 definitely holds its own in any pedal chain, especially for guitar players with the desire to blend new and old.

About JOYO

• JOYO TECHNOLOGY is a professional company specializing in R&D, manufacturing and marketing digital products for music education.
• Our main products include: Effects Pedals, Guitar Amplifiers, Tube Amplifiers, Rock House, Metronomes, Tuners, EQ systems, Drum Practice Pads, Pedal Controllers, Synthesizers, Wireless Systems, Audio Cables and Portable Power Supplies.
• Through product R&D, and with the strong support of a number of industry specialists, JOYO possesses its own acoustic core technology and has applied for several utility patents. JOYO has cooperated with many famous musical manufacturers at home and abroad, and JOYO products have been received by customers with great appreciation and affection. With a young and energetic team, we are devoted to being the forerunner of professional digital products for music education all over the world. That's what makes JOYO an excellent choice!

Product description

Natural acoustic sound everywhere you play with the AD-2 acoustic preamp, Acoustic-Electric guitarists can now experience natural, studio-quality sound while performing on any stage. Equipped with an advanced BOSS sound engine, This compact pedal packs sophisticated processing power that belies its small size and simple, intuitive interface. Acoustic resonance reproduces the complex resonance characteristics of your unplugged tone, while ambience provides pro-level reverberation perfectly optimized for acoustic guitar. The AD-2 also features essential stage tools such as a notch filter for feedback control, a balanced DI out for direct connection to a PA, and a convenient mute function for tuning and switching guitars.

• Acoustic-electric guitar preamp with advanced BOSS sound processing
• Sophisticated under-the-hood processing with multiple interlocked parameters, accessible with simple stompbox controls
• Acoustic resonance reproduces the complex resonance characteristics of an unplugged acoustic
• Ambience knob provides wide-ranging, studio-quality reverb optimized for acoustic guitar
• Notch filter for instant feedback reduction

User questions & answers

Question:	Should this be used with an amp, or does it work going direct into the PA
Answer:	It works well either way. I have had success using it through expensive and cheap p.a. systems, and various guitar amps like Fishman and Bose. It always delivers the sound I want.
Question:	Would this be suitable for boosting/controlling the signal of an acoustic guitar with contact pickups or would a boost pedal be better
Answer:	I have found that this pedal is mostly to enhance the tone of the acoustic guitar. If you need to increase the volume you will be better off with some kind of booster pedal.
Question:	Does it work with a adaptor DC 9.5v - 1A
Answer:	I would recommend sticking with the official BOSS/Roland power supply or use a 9V battery.
Question:	Does it it work well with standard/non ac/electrics mic'd
Answer:	This box has no mic input. There are others that do, like the Zoom A3. The main function of this one is to process a piezo signal, and its tone controls are pretty minimal, so unless you want it for a piezo pickup, you should probably look at other boxes.

Product features

AD-2 Acoustic Preamp Pedal

With the AD-2 Acoustic Preamp, acoustic-electric guitarists can now experience natural, studio-quality sound while performing on any stage. Equipped with an advanced BOSS sound engine, this compact pedal packs sophisticated processing power that belies its small size and simple, intuitive interface. Acoustic Resonance reproduces the complex resonance characteristics of your unplugged tone, while Ambience provides pro-level reverberation perfectly optimized for acoustic guitar. The AD-2 also features essential stage tools such as a notch filter for feedback control, a balanced DI out for direct connection to a PA, and a convenient mute function for tuning and switching guitars.

Bring Your Acoustic’s Natural Sound to the Stage

The tone of an acoustic guitar is created by the complex interaction of sounds from its body, top, strings, and other elements. And as you play with varying techniques, dynamics, and more, this interaction constantly evolves to create the rich, woody sound we love. Unfortunately, the standard undersaddle piezo pickups installed on most stage guitars simply can’t reproduce this resonant complexity. The AD-2’s Acoustic Resonance effect solves this issue by analyzing the input signal as you play, and then employing advanced processing to beautifully recreate your guitar’s naturally evolving tone. Twisting the one-knob control adjusts multiple parameters inside the AD-2 to achieve the perfect tonal balance for any style, from delicate fingerpicking to intense strumming.

Enhance Your Guitar with Pro-Quality Reverb

After using Acoustic Resonance to bring back your guitar’s natural, intimate tone, adding some further depth and dimension with a little reverb makes it that much better. With the AD-2’s Ambience effect, you can dial in studio-quality reverb for any performing environment. Unlike standard reverbs that can cloud an acoustic guitar’s sound, the optimized BOSS algorithms in the AD-2 produce lush, deep ambience that perfectly complements your instrument’s voice. Like the Acoustic Resonance effect, a simple one-knob control tweaks many interlocked parameters under the hood, giving you access to a wide range of detailed reverb sounds.

DI Output and Feedback Killer

The AD-2 features two independent outputs for performance flexibility. Connect the Output jack to your acoustic guitar amp or stage monitor, and use the Line Out to send a balanced signal direct to the PA mixer. It’s even possible to turn off the Ambience effect in the Line Out signal, giving the PA engineer the flexibility to add their own reverb at the board. And if you encounter any low-frequency feedback issues on stage, the AD-2’s notch filter has you covered. As soon as you hear that familiar rumble, just turn the Notch knob until it goes away. It’s that easy!

Product description

Description:

Control Range:

Bass: +/-12dB at 60Hz

Middle: +/-12dB at 500Hz

Treble: +/-12dB at 3KHz

Presence: +/-12dB at 10KHz

Power: 6F22 9V battery

Item color: Black

Pickup size: Approx. 9.8 * 5.8 * 4.0cm

Features:

With this preamp, you spend less time tweaking controls and more time playing.

Tone and volume control.

With volume, bass, middle, treble, pres control knobs.

LCD display, easy to read.

Powered by 6F22 9V battery(not Include)

Low battery check LED.

Auto and manual tuning mode.

Package include:

1 x 5 Band EQ Equalizer

1 x Piezo Pickup Line

8 x Mounting screws

1 x Microphone

1 x Battery box

• Pickup size: Approx. 9.8 * 5.8 * 4.0cm
• Power: 6F22 9V battery(not Include)
• With this preamp, you spend less time tweaking controls and more time playing.
• With volume, bass, middle, treble, pres control knobs.
• Package include: 1 x 5 Band EQ Equalizer, 1 x Piezo Pickup Line , 8 x Mounting screws, 1 x Microphone , 1 x Battery box

User questions & answers

Question:	No matter what I do, the unit stays in tuner mode. No instructions, how do I get out of tuner mode
Answer:	Get rid of it. These tuners are a piece of garbage. First one I got the volume knob stop working. The replacement just didn't work. Got my money back. Still waiting for another alternative unfortunately.
Question:	How much leeway is there in selecting the EQ position in terms of closer to or further from the neck
Answer:	If I am understanding your question, you can pretty much position the EQ, at your discretion...The EQ has a slight curve on the mounting plate, allowing you to move EQ forward or backward to match the, curvature of your guitar...the guitars curvature would be more of a factor in the placement of the EQ...
Question:	I have a fender with a fisher now that doesn't work. can i change it out with this one
Answer:	check the dimensions of the fisher against the Kmise if they are the same then I would say yes
Question:	Are there instructions regarding the installation of this product
Answer:	LOL no. If you don’t understand how to install, Look it up on YouTube, or don’t attempt yourself. Try a soundhole pickup instead which can easily be installed by a novice.

Product description

In early 1984 BOSS released two strange new devices under the name “The Pocket Series”. One of those devices was the FA-1 FET Preamp and it quickly found its rightful place among the legends of tone when The Edge of U2 used it on the recording of “Unforgettable Fire” as well as placing it in his following touring rigs. The Clover Preamp/Boost is our faithful interpretation of the FA-1 but with several additional features that we believe make this amazing circuit even better. You won’t want to be without your lucky tone-shaper at any gig!

• The Volume control allows you to set your volume at unity or as a boost to push your amp or dirt pedals
• 3 EQ controls to give you tons of control to cut or boost Bass, Mid and Treble
• The rotary switch has 3 settings: Full EQ, No Mid and No EQ
• Low Cut dip switch removes some of the lows if you feel your tone is too muddy and can help you cut through a mix
• In addition to the standard 1/4 inch input and output; the Clover has an XLR output for using as an acoustic or bass preamp

User questions & answers

Question:	Does anyone have experience using this with a bass guitar
Answer:	Yes, It worked fine for bass and pretty much any type of instrument you plug into it. There is only the regular 1/4" guitar in jack. But, there is a XLR our as well as a 1/4" guitar out. Please note there is no option for using only a 9-volt battery. You need to use the electrical plug.
Question:	is the buffer always on so the switch just engages the booster
Answer:	https://www.jhspedals.com/products/guitar-pedals/prestige/In the footsteps of our long-ago discontinued Mr Magic pedal, we bring you the "final act" in boost magic...The Prestige! From buffer, to boost, to tone enhancer, the Prestige will prove to be a vital and necessary piece of gear for anyone's rig. With the boost knob set to zero, you have in your hands an amazing buffer/enhancer for long cable runs as well as a tool that will simply add some life back into your rig. When the Boost knob is in the first 25% you will get different flavors of the buffer/enhancer as well as slight volume increases. When the Boost knob is set between 25% and 50% you have a powerful, dynamic solo boost that adds definition, clarity and a little magic to your solos and lead passages. When set at 50% or more, the Prestige gives you the ability to break up your tube amp in a smooth and natural way resulting in real tube overdrive from the preamp section of your tube amp. The last 25% of the volume range can completely destroy your amp in the best way possible, resulting in rich soaring sustain, breakup, and on some amps even a smooth warm fuzzy growl. When wide open, the Prestige will give you up to 27dB.
Question:	Hey, can this run on a battery, or only with the PS
Answer:	The Clover's current draw is too high for a standard 9V battery, so you need to use it with a power supply. Brian Meader Sales Manager The Guitar Sanctuary
Question:	Where is the idea location to place this unit amongst all my other pedal on the floor? (2) Should I hold off on purchasing a Buffer
Answer:	I have personally had the best luck putting the Clover after any other dirt/overdrive/distortion pedals but before delay or reverb effects. In this way, you can dial in the volume to work as a nice boost that will allow the tone/character of your other dirt pedals to shine through with the added volume to push the front end of your amp harder. Additionally, when selecting the full EQ, it provides a variety of tone shaping options. Whenever I put the Clover before other dirt/overdrive pedals, it sounded as though the clover was saturating the input of the other dirt pedal, and the overall sound was compressed in a way that I didn’t like. With the Clover last amongst my dirt pedals, I could hear my overdrive tone coming through (Wampler Euphoria), but driven harder and much more open than having the pedals ordered the other way around. Regarding the buffer, it depends on how long your cables are. Additionally, the Clover has a moderately high input impedance, so it will not present a significant load to your guitar or any other pedal around it (unless a preceding pedal has unusually high output impedance). If you dialed the Clover in for unity gain, you might not need a standalone buffer, but that’s a hard question to answer, as it’s greatly dependent on you own setup.

Product features

JHS Clover

The Clover is an end all preamp/boost circuit for any electric, acoustic, or bass player. The EQ is simple, powerful and doesn’t allow a bad sound. No matter what style of music you play or amp that you use, the Clover will prove to be an indispensable tool. While the Clover excels at being a preamp / boost for dirt pedals, the magic is in pushing your tube amplifier into natural overdrive. From country, rock, metal and even acoustic, The Clover covers every base.

Controls

The Clover has four standard controls and one rotary switch on the top. The Volume control allows you to set your volume at unity or as a boost to push your amp or dirt pedals. There are three EQ controls to give you tons of control to cut or boost Bass, Mids, and Treble. The rotary switch has three settings: Full EQ, No Mid, and No EQ. When set to Full EQ all three EQ controls are in operation, giving you full control over the full range of EQ available. The No Mid setting is an exact replica of the original FA-1, removing the ability to control the Mids and leaving them in a fixed setting. When in the No EQ mode all the EQ settings are removed and the Clover becomes a straight FET boost, perfect for pushing an amp. On the right side of the pedal there is a Low Cut dip switch. This removes some of the lows if you feel your tone is too muddy and can help you cut through a mix.

About JHS Pedals

JHS Pedals is the result of Josh Scott’s desire to build quality effects pedals that stand out in an over-saturated market. Started in early 2007 by way of a DIY repair to a Boss Blues Driver, JHS Pedals has evolved into an effects pedal company recognized world-wide. Josh’s years of touring and session work along with eventual electronics tinkering bring the experience and knowledge of what musicians need and want in their rigs, and that is one of the core values that JHS was built upon.

With a complete electric guitar, bass guitar, utility, and Mod Shop, JHS Pedals offers one of the broadest lines of effects on the market today. We value and commit to designing, populating, and assembling pedals that sound excellent, are easy to use, and work correctly.

• Guitar Pickup:The F-5T pickup is great for tuning on the move or on-stage. It features a note function for manual string tuning as well as an auto mode which will detect the string you are tuning automatically.As well as giving your guitar a modern look, the backlight LCD ensures visibility in all lighting conditions.
• With Tuner Function For Tuning Easily:The built-in tuner will be preferable over a clip-on tuner in noisy conditions. The indicators will ensure your guitar will always be perfectly in tune and within 10 cents accuracy.
• Easy To Read:LCD display, easy to read. Professional guitar and bass tuner Auto and manual tuning mode.The three LED lights will show if the string is flat, sharp or in-tune.
• Great Tone And Oickup Range:The Complete Kit offers great tone and pickup range, and is made to be installed in the body of any standard acoustic Guitar.Great accessory for electric acoustic and classic guitars.
• After-sales Guarantee:If you have any questions about the product,or you encounter problems with your use, you can contact our customer service. He will provide you with a solution in good time.No need worry about after-sale services.

User questions & answers

Question:	Do these fit in the factory holes of the ibanez aes10eam1202 acoustic? to replace the ibanez 5aeq43f that failed
Answer:	no it didn't fit.
Question:	Does come with a pickup
Answer:	Yes
Question:	I need something for flat surface. Is this flat and not curved
Answer:	A little curved
Question:	will this allow me to hook up my non-electric acoustic guitar to an amplifier
Answer:	Yes, once you have installed it correctly, your non electric acoustic will become electric-acoustic. Just be sure to install the piezo pickup under the bridge correctly.

Product description

The Practical Alternative

If you prefer the good old fashion tube amps, you hang on to that. We totally get the picture of years and years of carrying the amp anywhere you play and bonding with it. But if you've felt that carrying a tube amp is of a lot of trouble, and wanted something that is light and compact, but most importantly, sounds AUTHENTIC, take a look at this Coral Amp. This amp modeler is the real deal! The 16 models have covered from Fender Twin style crystal clean to the edge of break-up bite of Tweed, to the classic British roaring crunch, to modern monstrous hi-gain.

16 of Them

The 16 hand-picked amp models can cover basically all your tonal needs like California clean, British crunch, modern hi-gain. We simply get inspiration from those prestigious amp models through out the history of rock n' roll. And we spent days and nights trying to tune those algorithms, making them remain the maximum of authenticity.

Intuitive to Use

The layout of controls is as simple as it can get. LOW, MID, HIGH, VOL., GAIN are as what they are on those real amps. The knobs are made of LED, which can well show the working state of the pedal. And they are very responsive. Meanwhile, this thing is built like a tank. The Aluminum-alloy die-cast casing withstands wear and tear.

Bonus Features

Coral Amp has a Cab Sim function with a LED light. If the Cab Sim LED night flashes, it means that's the Cab Sim is on. If it stays still, then it's off. The 16 amp models would be divided into 2 channels. You can use the footswitch to choose between channels. And if you hold the footswitch button, you can turn the pedal off. And it's buffer bypass.

Specifications:

Power：9V DC center negative(not included)

Current Consumption：200mA

Dimensions：93.5mm(D)×42mm(W)×52mm (H);

Weight：150g

• 16 Carefully Selected Modeling Amplifiers from Clean to High Gain
• Convenient A/B Channel Switching for Awesome Live Experience
• Switchable, Dedicated CAB SIMs for Recording or Direct-to-PA
• Special Design Buffer Bypass Circuit Keeps the Sound Pristine
• Working with 9V Center Negative Regular Pedal Power Supply

User questions & answers

Question:	Can this be connected straight to a recording interface to record
Answer:	Yea, it is like any other pedal with in/out quarter inch guitar cables. As long as you ‘recording interface’ takes typical guitar cable input.
Question:	Can this be used with bass
Answer:	Was designed with guitar in mind, but can be used with Bass. You just need to find the right amp for your style of music.
Question:	Since it has cab sim can you plug headphones in
Answer:	It wasn't designed with that in mind. We suggest you to check our Rushead Pocket AMP if you want to use headphones.

Product description

Features:

- These great little powered pre-amp units include all of the parts you need to add a pickup to your acoustic or cigar box guitar.

- The rod piezo offers great tone and pickup range, and is made to be mounted beneath the saddle of a standard acoustic guitar.

- It can be easily built into a cigar box guitar bridge as well, or mounted inside the instrument.

- These can be mounted into a guitar with no soldering necessary (though of course some cutting, drilling and other alterations would be needed).

- Please note that the plastic face is curved, so as to fit the curved side of a standard acoustic guitar.



Specifications:

Material: Plastic, Metal

Color: Black

Presence Control: ±12dB at 8KHz

Middle Control:±12dB at 600Hz

Treble Control:±12dB at 2.2KHz

Bass Control: ±12dB at 600Hz

Size: 10.2 x 4.5 x 6cm/ 4" x 1.8" x 2.4" (L*W*T)

Cable Length: 56cm/ 22"

2.5mm Plug Cable Length: 35cm/ 13.8"

Weight:132g



Package Content:

1 x Preamp Plus Pickup

1 x Connecting Wire with 2.5mm Plug Low battery indicator.



Note: Battery not included here.

• 🎸This EQ 7545R pick-up equalizer system with 4 bands can be easily fitted into your acoustic guitar and it is essential to electrify and amplify their sound.
• 🎸4 bands plus volume control, supplied with a battery box, connecting wire with 2.5mm plug included,Under the saddle pickup for acoustic guitar.
• 🎸Pre-wired for easy assembly, spend less time tweaking controls and more time playing,Great Tone And Pickup Range.
• 🎸The Complete Kit offers great tone and pickup range, and is made to be installed in the body of any standard acoustic Guitar.
• 🎸Pushing the bass/middle/treble/pres knob for voice frequency adjustment, with volume control, professional guitar and bass tuner Auto and manual tuning mode.

User questions & answers

Question:	Will this product work on a ukulele u-bass
Answer:	No these cheap ones, they come from china. if you want instructions you'll have to google it or buy fisherman. I had no problem finding install video on youtube for mine. good luck

Product description

Function knobs:

Gain: Adjusts the amount of Overdrive

Treble: Adjusts the Middle-High frequency

Bass: Adjusts the Low frequency

Volume: Adjusts the output volume of the pedal



Specifications:

Material: Zinc-aluminum alloy

Type : Preamp /Overdrive/ Boost

Control knobs: Gain, Treble, Bass, Volume

Input: 1/4" monaural Jack

Output: 1/4" monaural Jack

Item Size: 9.3 * 3.8 * 3.2cm / 3.7 * 1.5 * 1.3in

Item Weight: 155g / 5.5oz

Power Supply: DC 9V (Due to the shell material and volume, battery power cannot be installed inside. DC power supply)



Please note:

1. Due to the lighting effect, the color of the item shown in the picture may be a little different from the real one. It is just for your reference only.

2. The measurement allowed error is +/- 1cm.



Packing List:

1* Effect Pedal

• Mosky guitar effect pedal for guitar players.
• This item has three control knobs: Gain, Treble, Bass, Volume
• This item can help adjust the amount of Overdrive, the Middle-High frequency, the Low frequency and the output volume of the pedal.
• True bypass switch, 100% analog signal path, On/Off LED indicator
• Full metal shell and compact size, durable and portable.

User questions & answers

Question:	Can i plug this in my pa system and not have to use a guitar amplifier
Answer:	You can but I doubt that it would sound as good as being plugged in front of a real guitar amp.
Question:	Cual sería el adaptador que necesitaría comprar? Hay varias opciones y estoy confundido. Gracias por la ayuda
Answer:	Adapter DC9V with the current greater than or equal to 100MA is ok.
Question:	What power adapter do I need for this? Should list this in sales ad because a normal adapter will fry the pedal
Answer:	I own 5 Mosky pedals all of them work perfectly with a standard Boss-style center-negative 9V ac adapter. I have them powered with Gator brand power suppies, and I have them powered with Hiree brand supplies too. [ https://www.amazon.com/Hiree-Distributor-Isolated-PedalBoard-Instruments/dp/B07S68CXJD/ref=asc_df_B07S68CXJD/?tag=hyprod-20&linkCode=df0&hvadid=343211985571&hvpos=1o1&hvnetw=g&hvrand=1240167428061946348&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9007927&hvtargid=pla-781246477136&psc=1&tag=&ref=&adgrpid=73034475990&hvpone=&hvptwo=&hvadid=343211985571&hvpos=1o1&hvnetw=g&hvrand=1240167428061946348&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9007927&hvtargid=pla-781246477136 ] Standard 9v supplies work
Question:	Plugged this in and tried to use it. Couldn't seem to have any effect, any ideas? Knobs at max had no effect still
Answer:	I know this is a basic question, but did you have the cable running from the guitar plugged in and firmly seated in the input jack of the pedal and the cable that plugs into the output jack of the pedal (runs to your amplifier) also firmly seated in the output jack? It’s possible that if not firmly seated, you’ll still pass a signal to the amp but the signal is either not passing through the circuitry or (in the case of the input jack) the pedal circuitry is not energized because that’s the “on switch” as it were when the guitar cable is plugged all the way in; either scenario can occur in most pedals with a hard wired true bypass. I learned this the hard way 15-20 years ago.

Product description

Designed to meet the needs of acoustic guitars. The onboard preamp system features a soundhole mounted preamp with rotary controls for volume and tone. The pickup comes standard providing a quick, solder-free installation.Suitable for all steel-string guitars and nylon-string guitars.



Soundhole-mounted rotary controls for Volume & Tone Completely redesigned active, onboard preamp. The pickup comes standard providing a quick, solder-free installation. You can expect about 100hours of continuous use between battery changes Can make 12" or 14" small size guitar produce a perfect bass.



Material: Metal

Application: For Acoustic Guitar

Product Dimensions(L x W x H): 40 x 60 x 25mm

Product Weight: 55g

Package Dimensions(L x W x H): 3.9 x 2 x 0.3 inches

Package Weight: 12OZ

After Sales Service: 1 Year Warranty



Package List

1 x Preamp

1 x Piezo Pickup

1 x Battery Clip

1 x Endpin Output Jack

1 x User Manual

• The pickup comes standard providing a quick, solder-free installation.
• Volume, Bass, Midrange and Treble, Briliance, Notch Filter, Phase Switch
• Completely redesigned active, onboard preamp.
• You can expect about 90 hours of continuous use between battery changes
• Easy Access Battery Compartment

User questions & answers

Question:	Will this work for a 12-string acoustic guitar
Answer:	I installed it on a 6 string guitar. The pickup goes under the bridge. It is long enough to be used on a 12 string. The equalizer works great.
Question:	Does it have power on off
Answer:	Right. It does not have an external on/off switch. Instead it shuts off automatically when a plug is not pushed into the output jack. So unplug and its off.
Question:	Is this fishman? other presys preamps read fishman on them
Answer:	No, it's the same size but it's not Fishman, it's TaoQi Brand which was registered in US. Good Quality.
Question:	What size batteries does it use
Answer:	9V battery

Product description

The latest addition to Orange's compact Terror amplifier series, the Orange Terror StAmp is a compact hybrid amp that easily fits on your pedalboard. You heard that right, Orange has crammed the punch and power of the Micro Terror into a stompbox you can keep on your pedalboard. The secret to the space-saving design is the 12AX7/ECC83-based tube preamp that's married to a 20W Class AB solid-state power amp. You'll get the compact amp you want without sacrificing the ear-splitting growl you love. Complete with a shaping control, buffered effects loop, and speaker output, the Orange Terror StAmp 20-watt Hybrid Amp Head proves that big things can come in small packages.

• 20W Hybrid Guitar Amplifier Head with Shape Control
• Cab Sim Headphone Output
• Speaker Output
• Effects Loop

User questions & answers

Question:	Does it run on a 18v power supply
Answer:	I have no idea where it is made. Maybe the seller could answer your question.
Question:	What's the adapter rating? Can it take 240V at 50Hz for use internationally
Answer:	This 4 pack costs $6 at Costco.
Question:	I have this and a ppc108 cab. the cab has two identical jacks on the back. would this allow me to daisy chain another ppc108 or ppc108 blk
Answer:	Very soft! Definitely non-abrasive!
Question:	Why can’t I use this pedal to boost the power of my amplifier by using both amplifiers sort of daisy chained
Answer:	Return them. They will clog and stop working all together. I had the same white sediment in the bottom of all my bottles. Had to send them back.