12 best heat tape reptile

• 🐢【 Safe & Thermostatic 】 - Closed circuit, anti-leakage, balanced temperature distribution, ensure pet safety, add warmth to your pet without scalding.
• 🐢【 Waterproof & Damp-proof 】 - Water proof and moisture proof designed, can be wiped with a moist towel. but please don't use it in water.
• 🐢【 Energy Saving 】 - The temperature is uniform, ultra-low consumption, energy-saving, environmentally friendly, safe and durable.
• 🐢【 Specification Standard 】 - US Standard Plug and voltage,no adapter needed, recommend using this product with a thermostat.
• 🐢【 Suitable for Most Reptile 】 - Suitable for turtles, snakes, lizards, geckos, spiders, small mammals, reptiles, etc. Provides the ideal amount of heat.

User questions & answers

Question:	Can u put this in dirt
Answer:	I think that a little dirt can be placed on the surface of the reptile heating mat, but not in a humid environment, you need to pay attention to temperature changes at any time. Thank you!
Question:	How do you attach underneath tank
Answer:	Hello, this heating mat has no adhesive, you just need to place it under the tank. Or put a layer of substrate on the pad and pets move on the bedding. Very convenient and practical. Excessive temperatures will melt the adhesive, so we did not use it.
Question:	Can I use it under a plastic bin
Answer:	I taped mine to the side of my bin opposite of the food. I haven’t had any problems. Dubia are breeding great.
Question:	Can I put it under clothes? Or will it burn them
Answer:	Hello, Temperature range of the reptile mat is 29-54 ° C / 85-130 ° F. which is absolutely safe. If you place the heating pad under your clothing, you need to adjust to the proper temperature. thanks!

Product features

Slight Waterproof Designed

This heating mat has a slight waterproof function, and the surface dirt can be wiped directly with a wet rag. But please don't use it in water.

US Standard Plug

US Standard Plug and voltage,no adapter needed. And low energy consumption, closed circuit, leak proof.

Rapid Heating & Larger Area

After power on, it quickly rises to the required temperature. New heating film and insulation increases overall heat transfer across the mat.

Product description

Choose your length in the quantity! Using our Flexwatt Reptile Heat Tape will enable you to maintain the ideal temperature to keep your pet healthy, comfortable, and active. Our reptile under tank heater simulates a naturally occurring sun warmed basking site that your reptile will benefit from. Our advanced Flexwatt Reptile Heat Tape allows for evenly distributed belly heat which in turn allows your herps to properly thermo-regulate. With 30 years of experience and a complete 5 year warranty, Calorique offers state of the art technology with every pet warming system.

• ✔️ Completely customization length - choose length in the quantity section - This is a 10ft Strip
• ✔️ Flame retardant coating stops fires before they start
• ✔️ Made in the 🇺🇸 USA 🇺🇸
• ✔️ UL Listed & CE Approved
• ✔️ Worry Free Guarantee - don't love it, we'll buy it back!

• Highly accurate: Designed with the latest thermopile sensor technology, to allow infrared laser thermometer gun to provide the highest accuracy up to ±1.5%; Improve the accuracy of the ir thermometer gun by adjusting the emissivity from 0.1-1.0 according to the surface material being measured
• Ultra-fast: With a distance to spot ratio of 12:1 and a response time of <500Ms, this allows the infrared temp gun thermometer to quickly provide the most accurate temperature readings of any target even at great distances
• Various usages: Pyrometer utilizes infrared technology which can measure a wide temp range of -58Fahrenheit~1022Fahrenheit / -50Celsius~550Celsius, enabling the heat detector to measure various objects' surface temp from a safe distance, especially above boiling point and below freezing point; Use the temperature gauge while preparing foods, performing auto maintenance, home repairs and a host of other tasks
• User-friendly: The termometro digital displays MAX/MIN/AVG temperature of the last scan, perfect for measuring AC vents or car engines; Thermal gun features a backlit LCD screen, that automatically shuts off after 90 seconds of no use to conserve battery
• Commonly found batteries: Temperature gun is powered by two powerful and commonly found AAA batteries that provide long battery life, when the low battery indicator remind you to change the battery, it's easily replaceable than other batteries. NOTE: This digital thermometer is not designed for taking Human Body Temperature

User questions & answers

Question:	How Can you measure oven temperature
Answer:	You must have a surface that you are pointing the device at. In other words it is not going to measure the air temp in the oven. If you have a baking steel or Pizza stone this would be perfect to measure the surface temperature. If you want to get the temperature of the grate, that works too. I hope this was helpful.
Question:	Will this device take body temperature accurately
Answer:	No. For body temperature you want a specific part of the body that is an enclosed area, usually under the tongue with the mouth closed. But this device only measures surface temperatures.
Question:	What are return policies
Answer:	You can return usually to a ups after you request it online. Just print out the return form and take it to a ups
Question:	Will this item measure air temperature from vents
Answer:	Sort of, yes. Technically no. It measures surface temperatures so it will measure the temperature of the grill the air is coming out of. That should be pretty close the the air temp so long as it has been blowing steadily for a while. But if the heat/cool has just come on it will give an inaccurate reading.

Product features

ThermoPro TP30 Infrared Temperature Gun

ThermoPro TP30 electronic thermometer is a non contact infrared thermometer that can measure highly accurate surface temperatures from a distance. With a 12:1 DISTANCE SPOT RATIO, farther away the target, larger the test spot area will become. IR temperature gun has an adjustable emissivity setting from 0.1 to 1.0, which makes thermal leak detector suitable to measure the temperature of any object or material. A built-in laser pointer allows for maximum accuracy when aiming at targets.

Laser Guidance

Built-in laser pointer with a Distance Spot Ratio of 12:1 enables you to know exactly what you are measuring from all distances. For the best accuracy, the distance between the temperature meter and object should approximately be 7.87 inches (20cm)

Adjustable Emissivity

Laser infrared thermometer has an adjustable emissivity setting from 0.1 to 1.0 to improve the measurement accuracy for measuring any object.

• The emissivity is preset at 0.95, which is suitable for surface temperature measurement of most objects. If you require more accurate measurements, you can refer to the user manual to adjust.

Max/Min/Avg Record

Review the maximum, minimum and average temperatures from your last scan by simply pressing the ‘Mode’ button on the heat thermometer gun. You can use these temperatures to help diagnose any problems with your AC vents or car engine.

High Accuracy for Various Applications:

NOTE: This product is not designed for taking Human Body Temperature!

Product description

The Repti-Warm Heat Mat was created with ease of use in mind. No more need to run multiple mats, just get the length you need. Ultra-thin construction & patented heating technology makes for a more uniform heat distribution and the durability to withstand rugged reptile environments. The Repti-Warm was designed with price, durability, & usability in mind. Terminals & electrical connections are sealed using a high performance self fusing sealant Choose your custom size (For custom length orders, contact us) Warms area 10-20˚+F over ambient temperature No heat wires or thick pad, so heat is always dissipated evenly over the whole mat Almost the entire surface of the mat is covered by the heat strips creating an even heat distribution Moisture sealed electrical connections (Do not submerse in water) Power cord (Optional Rheostat/Dimmer with OFF and fully variable power) Ultra-thin Super durable construction (No Multiple Plys, just one solid extra tough mat) Heat Strip, power cord, & dimmer are all UL Listed Components 110 OR 220V AC Power (Select Above, 220V only available in 11 inch) Assembled in USA and all components made in the USA except the power cord!!

• Terminals & electrical connections are sealed using a high performance self fusing sealant
• Warms area 10-20˚+F over ambient temperature
• No heat wires or thick pad, so heat is always dissipated evenly over the whole mat
• Moisture sealed electrical connections (Do not submerse in water)
• Heat Strip, power cord, & dimmer are all UL Listed Components

User questions & answers

Question:	can it be used as an uth or does it need more air circulation
Answer:	It can be used as an under the tank heater, yes.
Question:	Can it be used under or on the sides of a plastic tote
Answer:	Yes, it can be used in either style. I find it works best under the container as this gives the most even heat distribution.
Question:	I'm trying to sort out the dimmer vs. attaching to a thermostat -- it seems like the thermostat would provide more control
Answer:	thermostat is way easier to use set it and done the dimmer you have to play with to get the temp right and if you touch it or move it you have to set it. i would use a thermostat.
Question:	Do you have the connector and the safety plastic connector so i can order all in 1 order?? Do you have to the link or is it included
Answer:	We just sell the complete pieces like this. This heat tape comes with the cords connected and all safety items in place.

Product description

Vivian Reptile Warmer Mat Under Tank Heater with Temperature Controller



Features:

100% Brand New and High Quality

Heat mats distributes the heat uniformly to the surface of the substrate.

Extra thin design with maximum flexibility

its shape sees a greater heat concentration at the site of a more defined shape. no broken heating wires.



specifications:

Material: Plastic

Category: Heating pad

Plug Type: US Plug

Voltage: 110V

Color: Black



Power: 5W

Size: 14x15cm

Weight: 100g



Power: 7W

Size: 15x128CM

Weight: 130g



Power: 14W

Size: 28x28cm

Weight: 160g



Power: 20W

Size: 28x42cm

Weight: 200g



Power: 35W

Size: 28x65cm

Weight: 240g



Power: 45W

Size: 28x80cm

Weight: 280g



Package content:

1 x Reptile Heat Mat (US Plug)

• Automatic thermostat, safety and waterproof . Heat Mats distributes Heat evenly to the substrate surface.
• Low wattage heater provide ideal 24 hour heat for reptile and amphibians
• Power: 110, 5W/ 7W/ 14W/ 20W, Material : PVC / Main Color : Black
• US Standard Plug and voltage,no adapter needed
• Keep reptile tank warm without any harm to your pets

User questions & answers

Question:	I have pvc tank would this work? i would be putting it on a wood stand
Answer:	I think it would work. I've used it with a variety of materials, usually directly on top of a wooden table. I have not had any problems. There may be the possibility that over prolonged use it could discolor the wood, but using one for weeks at a time has done nothing to my table or to any of my tanks or tubs. It produces a nice gentle heat and I highly recommend it! (Using for baby parrots and hedgehogs.)
Question:	can the temp be set
Answer:	I set the dimmer and the temps stay very stable without a thermostat.
Question:	Do I need to prop my tank on something with the matt under or will in not hurt sitting on my table
Answer:	As long as you have it on a thermostat it should be fine on the table. I also would use foil tape to keep it firmly attached to the tank for extra security.
Question:	How long is the power cord
Answer:	I got different sized but each cord is about two feet long.

• ✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
• ✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
• ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.
• ✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range.
• ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.

User questions & answers

Question:	Is there an instructional video on how to put the temperature controller and heating pad together? Or an instructions pamphlet
Answer:	Hello, you can plug the heating pad to this controller and set the desire temperature, place the sensor to where you want the temperature to be controlled(for example, into the soil) then it should start working. You can find the manual of this controller here: https://centurytimer.com/product_resources/BNQ-T7BH/Instruction-Manuals-for-Web-BNQ-T7BH.pdf
Question:	Can a heat lamp be plugged into it and control the heat like if it was a mat
Answer:	Is this accurate with a heat lamp?
Question:	Is it normal for this to make an audible clicking noise when it turns on? Just got mine set up and it clicks when it turns on
Answer:	Is there anyway to disable that clicking sound? I just got mine today and its right next to my bed so its really irritating clicking on and off every 5 minutes.
Question:	can this be used for 2 che lamps
Answer:	With the wattage and amperage it says it can supply it should easily be able to handle 2 lamps. Just run a strip off the plug and only have them 2 lamps controlled by the thermostat. AGAIN, as long as it will handle what they say it can handle. A 100watt bulb should only pull just under 1 amp.

Product features

BN-LINK Digital Heat Mat Thermostat Controller

BN-LINK Digital Thermostat Controller is your perfect solution to providing constant optimum temperature for a variety of uses. Our thermostat controller has an easy plug-in operation with LED Illuminated Indicator Lights & Three-Prong Ground Plug.

Effortless Set-Up

A manual is included with our thermostat controller. But with the simple interface, it won't be needed! Please follow these instructions:

1. Plug in the thermostat controller
2. Press and hold the "Set" button to enter the temperature setting
3. Press the UP/DOWN button to adjust the target temperature
4. Press the "Set" button again to complete the process

**Please note that there is a 2-3 degree buffering zone for the thermostat controller to turn your appliance on again**

Switch Between Temperature Units

To toggle between Fahrenheit or Celcius:

• Press and hold the DOWN button for 3 seconds for Celcius
• Press and hold the UP button for 3 seconds for Fahrenheit

Simply Plug Your Appliance In

Our BN-LINK heating thermostat controller has a simple design for the convenience of our customers. Plug in your appliance and watch our thermostat controller maintain the optimal temperature you've set for your needs.

Keep Your Pets Warm

Maintain perfect temperature control in reptile terrariums and small pet enclosures. Place the temperature probe where the heat source will target and watch your pets stay warm and happy.

Great for Seedling and Plant Germination Projects

Grow with BN-LINK. Our thermostat controller is ideal for maintain rooting temperatures in a tray and dome.

Variety of Uses

Help give your aquatic life a comfortable environment with the help of our thermostat controller.

Easy to Mount

With the mounting holes on the back of the thermostat controller, it allows you to customize your area. Mount anywhere you need the thermostat controller to be.

Product description

Feature: 10" x 20.5" heat mat fits under one common seed flat. Warms root area 10-20°F over ambient temperature to improve germination. Provides constant temperature to improve vegetable, plant, herb, and flower seed germination. Waterproof design allows you to scrub and easier cleaning. Durable internal insulated wiring for enhanced safety. Heat mat thermostat controls temperature in colder or warmer environments. Provides constant optimum temperatures for specific crops. Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F. Specs: 120 Volts / 8.3 Max Amps / 60 HZ / 1000 Watts. Place sensor into the rooting area about 1"- 1-1/2" Position thermostat up and away from seedling trays and stray water. Do not submerge Plug heat mat into thermostat. Plug in thermostat power cord and set maximum desired temperature. Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don't exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat and set the desired temperature. Abnormal Warning: if thermostat shows "E1", it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit. if thermostat shows "E2", it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit. if thermostat shows "E3", it means that the temperature sensor is not working properly. Please re-install the sensor. About iPower: iPower is one of the leading professional hydroponics suppliers over a decade. Our goal is to put our best products in every home & garden where needed. We only provide the premium quality components and reliable service.

• Variety of Uses: Perfect for indoor gardening, for better plant growth and flower seed germination, spring seedling starts and cutting propagation.
• Uniform and Stable Temperature: Seedling heat mat is the new stronger heating wire and thicker multi-layer construction, can warm root area 10-20°F over ambient temperature. Thermostat provides constant temperature control for your various environments
• Temperature Control: Digital thermostat provides temperature control between 40°F - 108°F (5-42°C), Choice of Celsius or Fahrenheit readout. The sensor probe delivers accurate readings in both cool and warm environments.
• Package Include: 1 pack 10" x 20.5" heat mat, 1 pack digital thermostat (plug-in operation with LED illuminated indicator lights & three-prong grounded plug).
• Good Service: If you are not completely satisfied with our product or receive a defective product we are happy to find an acceptable solution. Please do not hesitate to contact us with any questions or concerns.

User questions & answers

Question:	how do you put the censor in a reptile enclosure
Answer:	Attach the suction cup to the inside enclosure.
Question:	How long can this be left on continuously
Answer:	I've left this on for weeks at a time. Almost going on a month. I use it for my Leopard geckos.
Question:	Could i put this inside a 10gal hermit crab tank and put moist sand on top of it? Or would i need to put it under the tank
Answer:	It is not waterproof so i wouldn't suggest using it in the tank. Careful using it under though, it can warm up the glass and sand much warmer than it'll get the air, it may overheat the crabs unless the temperature probe is also under the tank.
Question:	Can the Sensor be placed in liquid? I'd like to use it to brew Kombucha
Answer:	No. I use it for Kombucha. Wrap the mat around the container. the first one came with an insulator sheet too. Just put the sensor on the outside of the container and get a temp strip for the container that will tell what the temp is for control. Done this for over a year with another mat and had no issues. This one since it did not come with the insulator sheet I am putting a towel around it to help hold in and keep a consistent temp.

Product features

Seedling Heat Mat

• Warms root area 10-20 degree fahrenheit over ambient temperature to improve germination
• Increases the success of seedlings and cuttings
• Provides constant optimal temperatures
• Easy Plug-In Operation with LED Illuminated Indicator Lights & Three-Prong Ground Plug
• Waterproof, durable construction, and easy cleaning

Heat Mat Thermostat

• iPower heat mat controller can provide constant optimum temperature for plants, seedlings and cuttings
• It is ideal for maintaining rooting temperature in a tray and dome, home brewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures
• Easy Plug-In Operation with LED Illuminated Indicator Lights & Three-Prong Ground Plug.The controllable range of temperature is 40-108°F
• Temperature Display Range: 32-108°F

Stronger heating wire and thicker multi-layer construction

Waterproof and easy cleaning

Add a humidity dome for heat retention

Germination Helper

iPower heat mats work perfectly on starting seed, even for beginners. They increase the success of seed starting by warming the root area 10-20 degree Fahrenheit over ambient temperature. The seeds will germinate better in a warm environment.

Terrarium Warmer

iPower heat mats is also applied in heating the pet terrariums. With the help of iPower Heat Mat Thermostat, the heat mats power can be controlled to provide a accurate temperature for your reptile pets.

DIY Your Brewing

Do you want to DIY a homemade wine? iPower heat mats working with the iPower Heat Mat Thermostat can control the heating for your wine containers to provide an accurate and appropriate temperatures to ferment.

Product description

Material: PVC

Rated power: 5w/ 15w/25w/35w

Plug: US plug

Rated voltage: 110V

Adjust the temperature: 0-35 degrees

Temperature control: with temperature adjustment switch

Size:

5W: 5.9*7 inch

15W: 8.66x9.84 inch

25W: 8.66x16.53 inch

35W: 9.84x21.65 inch

Package included:

1 pack reptile Heating Mat

Note:

1. It is strictly forbidden to cover with wood chips, coconut soil, quilt towels and other non-conductive objects.

2.Please do not immerse it in water or leave it in a high humidity environment for a long time.

• * High Quality: Made of high quality PVC, durable and safe for your pets. Extra thin design with maximum flexibility. Energy-saving design, convenient heating pad for different seasons
• * High Efficiency: Uniform distribution of heat conduction ink fast heat conduction, stable performance and long service life. Equipped with temperature controller, provides a suit and quick warm temp. It also adjust the temperature through the rotary switch according to the needs of your pets.
• * Powerful Function: This reptile heating pad can keep reptile tank warm without any harm to your pets and also won't disturb animals sleep pattern.Helps reptile for daily activity, appetite and metabolism.
• * Wide Application: The reptile heat pad ideal heater source for desert and tropical species of reptiles, amphibians and arachnids.
• *Feature: Ultra-thin plastic surface to minimize wear on the heating mat surface.Waterproof and moisture proof, it can be wiped. This product has a slight waterproof function. The surface dirt can be wiped directly with a wet rag.5w/15w/25w/35w 110v Non-Adhesive ,Removable Under Tank Heat Pad

Product description

Reptile Heat Cable allows you to put the heat right where you need it. Wrap it around branches or cage furniture. Use it underneath the tank or in breeder racks. Flexible, water resistant, and durable Reptile Heat Cable has numerous uses for the professional or the hobbyist. for tanks 30-40 gallons

• Inexpensive, low wattage heaters
• Secondary heat source
• 6.5 foot cold lead

User questions & answers

Question:	Can it be cut to length
Answer:	No
Question:	Could this be used on the outside of a ten gallon shrimp aquarium to heat the water if taped to the glass
Answer:	It will warm the water, not heat it. If you need to heat water in a tank, get a submerged heater.
Question:	Will this heat up to 90 degrees
Answer:	Yes
Question:	How hot/warm does this cable become? What is the max temp? i'm thinking of buying 23ft one
Answer:	The cable will maintain a temp of 78-92 degrees de0ending on your internal room temp...I keep my reptile room at 78 degrees during the winter.

Product description

Reptile Heat Pad, Reptile Heating Pad, Reptile Heat Mat, Heating Pad for Reptile, Under Tank Warmer, Under Tank Heater, Terrarium Heating Pad



Specification

- Material: PET;

- Color: Black&White;

- Plug Style: US Plug;

- Voltage Range: 110v;

- Power: 25W.

- Regulating Range: 0-35 Degree;

- Size: 8.6inch x 16.5inch.



Kindly Reminder

1. Highly recommend using the terrarium heating pad with a thermostat. Or use a temp gun and check the temps to ensure correct temps.

2. The reptile heater mat is slightly waterproof, do not immerse it in water or long-term in high-temperature environment, so as not to cause electrical short-circuit and burn hazards.



Package include

1 x Adjustable Reptile Heating Pad(US Plug).

• [UPGRADED VERSION]:Reptile Heating Pad upgraded with powerful heating wire to provides gentle and warm heats for 24-hour primary or secondary heat source for small animals, upgraded PVC material is more solid than similar products. The Reptile Heater Pad helps reptiles for daily activities, appetite and metabolism. It can keep the reptiles' tanks warm without hurting your pets, and will not disturb the sleep patterns. Please Note: Don't lay reptile or insect directly on top of the pad;
• [OVERHEAT PROTECT]:Reptile Heat Mat 25 watt power was designed to prevent overheat, it take around half an hours to heat properly. Equipped with a temperature control switch, provides a suit and constant heat, can control temperature between 0 to 35 ℃（32℉ to 95℉);
• [SPECIFICATIONS]:Heat Pad for reptiles recommend for size: 8.6" x 16.5" (22cm x 42cm); 110V US standard plug and voltage Under Tank Heater, no adapter needed, safe and balanced temperature distribution; Power: 25 watt; Recommend for large tank;
• [CONVENIENT TO USE]:Terrarium Heat Mat is of high quality PVC material, its soft surface can be flexible and folded. Easy to clean, convenient and practical, waterproof and moisture proof designed, but please don't use it in water.(Don't cover the heating pad with non-thermally conductive objects such as wood chips, coconut soil, and quilt towels);
• [SUITABLE FOR MOST REPTILE]:Under Tank Warmer Pad is ideal for tortoise, snakes, lizard, gecko, hermit crab, turtle, spider, insect breeding, and other amphibians that require belly heat, suitable for all kinds of glass fish tank, turtle tank bottom, plastic boxes, acrylic boxes, reptile wooden boxes, also perfect for germination, homebrewing;

• HEATIT aluminum foil tape provide a tough, strong bond at low and high temperatures from -22 F to 248 F
• 2.0 inches wide x 30 feet (10 yards) length. 2.4 mil foil thick and 2.9 mil backing paper thick
• HEATIT aluminum foil tape can stick well to most surfaces by its high quality acrylic pressure sensitive adhesive. A clean, dry and free of oil or grease surface is necessary before applying HEATIT aluminum foil tape
• Flame retardant, UV resistant, Chemically resistant. Perform well in thermally conductive. Improving the heating and cooling efficiency
• Idea for Indoor and outdoor applications: pipe heating cable attachment, duct insulation, general repair, cold and hot air ducts, HVAC, aluminum sealing, copper pipe fixing etc

User questions & answers

Question:	Is this tape fire resistant
Answer:	yes it is fire resistant.
Question:	Can it be used on plastic air conditioner hose & the plastic hose connector
Answer:	Yes it can be used on air conditioner hose
Question:	Is it safe to use as a high temp tape for wrapping the heatit heat cable
Answer:	Normally we wrap HEATIT aluminum foil tape around the pipe for a better heat transfer. As we know the aluminum tape is conductive. I think you can use the Heatit aluminum foil tape as high temp tape for wrapping HEATIT JHSD, JHSF, JHSF1, JHSF1-CT. For these cables they owned the out jacket as the insulation.
Question:	what kind of tape can use to put together the double bubble insulation
Answer:	You can use this aluminium tape it works great. I used it to insulate bubble insulation

Product description

1. How Pymeter control temperature?

Temperature controller is actual Heating/Cooling controller, thus MUST SET ON-Temp to turn ON Heating/Cooling, and MUST SET OFF-Temp to turn OFF Heating/Cooling.

Heating starts at LOW Temp [ON-Temp(1oN, 2oN)], stops at HIGH Temp [OFF-Temp(1oF, 2oF)], thus for heating MUST SET 1oN(2oN) LESS than 1oF(2oF);

In heating mode, 1oN(2oN) is the minimum temp you allow, 1oF(2oF) is the maximum temp you allow.

Cooling starts at HIGH Temp [ON-Temp(1oN, 2oN)], stops at LOW Temp [OFF-Temp(1oF, 2oF)], thus for cooling MUST SET 1oN(2oN) GREATER than 1oF(2oF).

In cooling mode, 1oN(2oN) is the maximum temp you allow, 1oF(2oF) is the minimum temp you allow.

2. Reading temp is inaccurate?

Every Pymeter controller is calibrated before come out of factory, it is reading temp accurately!

Please don't compare it to common inaccurate thermostat、thermometer or temp gun. If you doubt Pymeter controller accuracy, please calibrate with ice-water mixture (it is 32F when ice is melting), and you will see which device is accurate then.

3. Beeper keeps sounding?

Probably it is the Alarm settings ( AL、AH、d7 ) you set are NOT the right temperature you want. AL is low temperature alarm(it sounds when current temp is AL or Lower), AH is high temperature alarm(it sounds when current temp is AH or Higher), d7 is difference alarm(it sounds when the temp deviation between sensor 1 and sensor 2 is over d7). If you don't need alarm function, please don't change the values of AL、AH、d7, the default values usually won't trigger alarm. You can factory reset by switching temp unit from F to C in setting.

Please download User Manual PDF in Product information.

• ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
• ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
• ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
• ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
• ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.

User questions & answers

Question:	The max temp is 210 Fahrenheit correct
Answer:	Yes, correct.
Question:	How do I change the probes from cool to heating in settings? What buttons do I press in what order
Answer:	Cooling and heating are relevant to the "turn on at 'x' temp" and "turn off at 'x' temp" if it is not working in your preference currently, try switching some measurements in opposites of each other.
Question:	How do we get a "Free New Replacement" as mentioned below
Answer:	Please contact support on www-pymeter .com or send message to us on Amazon directly.
Question:	Can you send me a copy of the instructions? Mine didn’t come with any
Answer:	Sorry for that. Please read/download the instruction via this link: https://www.pymeter.com/PY-20TT-User-Manual.pdf, any further question, just message us on Amazon directly :)

Product features

Pymeter Heating and Cooling Temperature Controller

Pymeter Digital Temperature Controller is easy to use, safe & reliable dual outlets thermostat. It is used as over temperature protection or automatic temperature control system with various electric appliances such as heaters for Reptile, Aquarium, Greenhouse, Home Brew, Fermentation, Accelerating Germination, Plant Grow Tent, Pet Breeding, Incubation, BBQ, Terrestrial Heat Control, Aquarium Cooling Fan, Electric Radiator, Electric Oven, etc.

Advantage compare to other Thermostat:

Parameters

Temperature Range: -50~99°C/ -58~210°F; Temperature Resolution: 0.1°C/ 0.1°F

Controller Dimension: 8.26x2.16x1.57 inch; Temperature Accuracy: ±1°C/ ±1°F

Input: 85~250VAC, 50/60Hz; Output: 85~250VAC, MAX 10A

Buzzer Alarm: High/Low Temperature, Differential Temperature, Sensor Fault

Input Power Cord: 4.5ft; Sensor Cable: Waterproof Sensor x2; 2m/ 6.56ft.

Widely Applied