12 best pool salt meters

Product description

eSeasongear SALT-3050 Waterproof IP65 Digital Salt Salinity Temperature Meter Tester *** Works ONLY for Salt Water Pool and Koi Fish Pond Salt level testing! *** Will NOT work for Sea/Marine/Salt Water Fish Tank Salt level testing! *** Will NOT work for Food salt level testing! *** Will NOT work for any other application! *** Salt Range: 0-5000ppm or 0-5.0 ppt; Temperature Range: 0-55 °C or 32-130 °F *** Waterproof Rating: IP65; Do not drop the meter into water since it is not rated to the IP-67. *** The SALT-3050 is precalibrated at 3000ppm salt for pool and pond testing. *** This meter is better than the KoiMedic Koi Medic Salt Meter - Electronic Pond Water Salt Level Tester. *** The 3000ppm calibration solution is available if needed for recalibration. *** eSeasongear is a registered trademark of All Water Care, Inc.

• Precalibrated at 3000 ppm salt (NaCl) at 25°C / 77°F
• Built-in ATC sensor for automatic temperature compensation; Built-in salt (NaCl) conversion factor for meter calibration
• Salt Range: 0-5000 ppm or 0.0-0.5 %; Temperature Range: 0-55 °C or 32-130 °F; Waterproof Rating: IP65
• *** Works ONLY for Salt Water Pool and Koi Fish Pond Salt level testing.
• *** Will NOT work for Sea/Marine/Salt Water Fish Tank Salt level testing *** Will NOT work for Food salt level testing! *** Will NOT work for any other application!

User questions & answers

Question:	How do I know if this is working? My saltwater hot tub sample reads 2900 ppm, but my test strip reads 1500. Why would the readings be so different
Answer:	My strips read different than my meter also, but i go by the reading on the meter and it has been working well for our pool and hot tub
Question:	Does this work to test salt in aquarium
Answer:	No, works ONLY for Salt Water Pool and Koi Fish Pond Salt level testing, the sea water is out of the SALT-3050 testing range (0-5000ppm)
Question:	Which 'scale' on this Salt-3050 do you use to test the level of salt in a swimming pool? Meter has four scales
Answer:	Push the POWER button to turn the meter on, make sure the meter is on the 0.5 ppm mode. (Push and hold the MODE button to change the mode to 0.5 ppm if needed.)
Question:	Would I use this in place of the salt testing strips for my salt water pool
Answer:	Absolutely. The strips don't work. I use this meter all the time and love it

Product description

eSeasongear SALT-3000 (TDS4TM-3000) Digital Electronic Salt Salinity Temperature Meter Tester --- NOT waterproof! *** Works ONLY for Salt Water Pool and Koi Fish Pond Salt level testing! *** Will NOT work for Sea/Marine/Salt Water Fish Tank Salt level testing! *** Will NOT work for Food salt level testing! *** Will NOT work for any other application! *** NOT waterproof! *** Please buy the SALT-3050 if you need a waterproof salt meter. *** Salt Range: 0-5000ppm or 0-0.5%; Temperature Range: 1-50 °C (New 2016 model display in F too!) *** Check out the picture to find out how to read the digital display: 300x10ppm = 3000ppm = 0.3% salt *** The SALT-3000 is precalibrated at 3000ppm salt so there is no calibration needed. *** This meter is equivalent to the KoiMedic Koi Medic Salt Meter. *** eSeasongear is a registered trademark of All Water Care, Inc.

• Precalibrated at 3000 ppm salt (NaCl) at 25°C / 77°F
• Built-in ATC sensor for automatic temperature compensation; Built-in salt (NaCl) conversion factor for meter calibration
• Salt Range: 0-5000 ppm; Temperature Range: 0-55 °C or 32-130 °F; Not waterproof ( please buy the SALT-3050 if you need a waterproof salt meter).
• *** Works ONLY for Salt Water Pool and Koi Fish Pond Salt level testing.
• *** Will NOT work for Sea/Marine/Salt Water Fish Tank Salt level testing *** Will NOT work for Food salt level testing! *** Will NOT work for any other application!

User questions & answers

Question:	Does not read salt in pool accurately
Answer:	I think it does. It makes be a few points off, not sure, but our salt reader went out on our pool and was going to cost a boatload of money. Our pool guy recommended getting a meter. Since I keep our salt in a range of 2900-3400ppm I am not too concerned if it is perfect so I haven’t tested it. I am pleased with this. Serves me well.
Question:	How do you change from C to F
Answer:	Push the TEMP again, but it will only work for the new 2017 model, the 2016 or earlier models only display in C.
Question:	Is this tds meter appropriate to measure salt levels in my koi pond
Answer:	I use it for my salt water swimming pool. Works fine.
Question:	i have a pool company will this work to test salt pools
Answer:	Yes, this is for testing salt level in salt water pool.This meter is not waterproof, so please do not let it drop into pool.If you need waterproof one, please search for SALT-3050 meter.

Product description

LaMotte 1749 Salt/TDS/Temperature TRACER PockeTester, 1.6" W x 7.4" L x 1.6" H

• Auto Power Off After 10 minutes of no button presses
• 0 to 199.9 µS, 200 to 1999 µS, 2.00 to 19.99 mS Conductivity Range
• 0 to 99.9 ppm and mg/L, 100 to 999 ppm and mg/L, 1.00 to 9.99 ppt and g/L TDS Range
• 0 to 99.9 ppm S, 100 to 999 ppm S, 1.00 to 9.99 ppt S Salinity Range

User questions & answers

Question:	Can this water tester measure out the amount of fluorides' been added to the tap water
Answer:	I just received the product last week, however, the four corner top and the open-close lid is a very tight seal. Therefore, it should be good against wheat bugs.
Question:	the description says it measures 100 to 999 ppm salt, tds...but the review says 3000 ppm salt calibration. What is the actual range of the device
Answer:	Each container holds 16.6 cups.
Question:	Is it durable? my last meter only lasted one year. Thank you
Answer:	Air tight yes. Not easy to open. Hard getting your cereal out as well. The hole isnt big enough...
Question:	Does this oximeter have a probe
Answer:	Pantry moths and bugs will not enter the container. If they end up in the container you either didn't secure it properly or the product you were storing was already infested. I was in pest control for 5 years.

• ✅ QUICK AND EASY TO USE :.Multiple Salinity measurement unit .Salinity Tester or Salt Meter is used to measure the value of salt in liquid and had been widely used in Water Quality Testing procedure.
• ✅ UP TO Accuracy: ±%F.S ±1 digit / ±0.5°C with Switchable temperature unit °C/°F
• ✅ BUILT IN FEATURES : NaCL Temp. coefficient
• ✅ EXCELLENT PERFORMANCE : Sensor life time: >6 months (with good maintenance)

User questions & answers

Question:	Does this only test the salinity of the water or does the TDS effect the results too
Answer:	Hi, the following model can test salinity and TDS ASIN: B081YX35VF URL: https://www.amazon.com/dp/B07J5JHXM6/ref=twister_B08PP4YYZF?_encoding=UTF8&psc=1
Question:	Are replacement sensors available
Answer:	I don't know but mine works great. It is very accurate.
Question:	I need to measure 2500 ppm of salt. That would be 0.25% of salt for a hot tub. Can this measure water salinity in that range
Answer:	Yes, you can easily measure 2500 ppm. In fact one can measure ppm of 9000 easily. I was able to measure ppm of about 9500. But once the ppm of the salt solution exceeds 10,000, the salinity checker display went blank and was not able to read anything. Note that the instrument is rated to measure a ppm of 9999.
Question:	Will this help test for Sodium (NA) in softened water
Answer:	Yes it will test for salt in any water.

Product features

Waterproof Housing

It features multipoint calibration, single press calibration per range, conductivity to TDS conversion factor, built-in NaCL temperature coefficient, built-in ATC to ensure 100% accuracy.

IP rated as "dust tight" and protected against water projected from a nozzle. Waterproof housing (waterproof & dustproof)

User-friendly Features

Large display screen for enhanced readability,digital water tester is loaded with a number of handy features including auto power off (with disable function), data hold, adjustable automatic temperature compensation

Unique Features

Water quality meter allows the user to select between automatic ranging and manual ranging capability when testing, alternate between °F and °C units of measurement, and offers multi-point and one-touch calibration.

Multipoint calibration,

It features multi point calibration, single press calibration per range, conductivity to TDS conversion factor

Data Hold Functions

A water salinity tester is just one function

Get into monitoring with Salinity Meter!

Auto and manual ranging feature gives you an option to automatically determine and select a range that gives the greatest resolution and accuracy or manually select your preferred range.

Salinity testing can help to determine the extent that runoff and effluent discharges influence an aquatic system.

Note : Remove the Battery from the unit that you do not plan to use for a month or more.

Why use a water salinity meter?

Using a water salinity meter is a quick and easy way to measure salinity.

• It quickly and accurately measure salt concentration in koi ponds.
• There are various purposes for a water salinity tester. It could be used to indicate if water is safe for irrigation, which is important for agriculture.
• Salinity is a fundamental parameter for monitoring
• Salinity testing can help to determine the extent that runoff and effluent discharges influence an aquatic system.

Product description

It is a multi-function water quality testing pen, which can measure ph, TDS solubility, EC conductivity, salinity and temperature. It has high performance, shape design, fast numerical stability and accurate calculation results.



Specification:

TDS measurement range: 0-1000ppm



EC measurement range: 0-10000us/cm



PH measurement range: 0.01-14.00 PH



Measuring range of salt: 0.00-25.00%



Seawater salinity measurement range: 10.1-200.0 PPT.



Accuracy: 0.01-5.00% (±0.1%)



5.01 25.00% (+ / - 1%)



Display size :33*24mm



Size and weight :183*37*37mm(7.2*1.5*1.5in)/90g(3.2oz)



Waterproof grade :IP67



Using the step



1. Pull out the electrode cover before using.



2. Press the switch to turn on the power supply, and then place the electrode into the test solution.



3. When the value is stable, press the button to fix the measurement value, then take out the meter and read the measurement value.



4. After use, press the shutdown button, clean the meter, and insert the electrode into the electrode protective cover.

Packing list

1x multifunctional test pen

3x1.5 lr44 (not including)

1 x box

• It is a multi-function water quality testing pen, which can measure ph, TDS solubility, EC conductivity, salinity and temperature. It has high performance, shape design, fast numerical stability and accurate calculation results.
• TDS measurement range: 0-1000ppm EC measurement range: 0-10000us/cm
• PH measurement range: 0.01-14.00 PH
• Measuring range of salt: 0.00-25.00% Seawater salinity measurement range: 10.1-200.0 PPT.
• Accuracy: 0.01-5.00% (±0.1%) 5.01 25.00% (+ / - 1%)

Product description

The “dual” range PoolMeter 512T5D converts electrical conductivity directly into parts per million (ppm) of Total Dissolved Solids (TDS) OR ppm of Sodium Chloride (NaCl) as selected. Perfect for high Sodium Chloride systems.

User questions & answers

Question:	Is this item battery operated
Answer:	I measured with the lid on... 10 inches tall, 9.5 inches deep, 4.25 wide.

• ✔ACCURATE AND RELIABLE: To achieve high accuracy, equipped with premium quality titanium alloy probe, and reliable Automatic Temperature Compensation (ATC) ensures reading always be accurate at various temperatures.
• ✔MULTIFUNCTIONAL AND UPGRADED: Professional TDS, EC and Temperature Pen 3 in 1. Upgraded with big backlit LCD for easier reading, and auto-lock function for easier use.
• ✔EASY AND INSTANTLY: Just turn TDS meter on and stir water gently, then stabilized readings will be auto-locked on LCD in seconds, and the tds ppm meter will shut off automatically if without operation over 2 minutes.
• ✔MULTIPURPOSE TDS TESTER: Test the purity of drinking water to ensure it's healthy, monitor if Reverse Osmosis (RO)/DI System works properly, whether filter need replaced, maintenance aquarium, hydroponics(test nutrients) and pool, etc.
• ✔3 YEARS WARRANTY. And we offer 90 days Money Back Guarantee if not totally happy with the digital TDS water tester meter.

User questions & answers

Question:	Can you put this is soil
Answer:	Sample water is collected in a plastic cup. The tester is placed on the cup (both are part of the kit). A short probe dips into the water to measure salt, TDS, temperature. NOTE. This product does not measure oxygen in the water.
Question:	Can this meter display a negative (-) reading, which would be expected for alkaline water
Answer:	I haven't actually measured to be certain, but I'm guessing that it's the container that is 9.5 in. deep. With the lid on it's 10" tall. They hold quite a lot. I have one that was about a third full and just emptied a near full Family Size raisin bran in it and it fits. Shook it down a bit, but it's all in there.
Question:	Got tds meter. tested tap water, fridge-filtered, and new waterdrop-filtered. each was varied between 290 +- 30 tds. cleaned leads. no diff. why
Answer:	Approximately 3 1/2 wide x 9 1/2 inches tall
Question:	Does anyone know how to recalibrate this? because it's telling me that my ro water has a tds of 1700ppm
Answer:	9.5"

Product features

Super accurate, reliable and easy to use TDS, EC &Temp water tester reader, with backlit and auto-lock function.

This advanced digital ppm meter pen with Advanced Microprocessor Technology, combines TDS Meter(Total Dissolved Solids), EC Meter(Electrical Conductivity) and Temperature meter all in one ergonomically designed pen.

Widely be used for all Water Quality Testing, Water Purification Applications, Aquaculture, Hydroponics, Pool & Colloidal Silver, Water Treatment and more.

It’s a must have handy tool for every household, testing for tap water, filtered water, distilled water, bottled water, well water, refrigerated water, etc.

Features:

• Automatic Temperature Compensation(ATC)
• Equipped with backlit LCD for easy reading. If TDS≤40, the backlit color is green, If TDS>40, the backlit color is red.
• Auto-Lock Function: From test beginning, the reading can be stabilized in seconds, and locked automatically for easy read and record.
• Hold Function: Before reading locked automatically, the reading can be locked manually if press “HOLD”.
• Factory Calibrated: No need calibration by user.
• Auto-Off in 2 Minutes to conserve battery.
• A colorful TDS chart on the back to explains ppm readings.
• Includes a protective carrying case with belt clip, easy to carry.

Product description

This new addition to the Oakton ecotestr product line features updates to make measuring water quality easier and faster. The display is larger with a better viewing angle, has indicators for battery life, readiness, and calibration, and shows both the parameter and temperature readings at the same time. To enhance field use, the cap was redesigned to be leakproof and can be attached to the top of the meter when not being used no more lost caps! the cap features a fill line, so you know how much sample you need for an accurate reading when using the cap as a sample cup. It is also wider, providing a base to keep the meter upright for hands-free measurements. The keypad now has a fourth key to simplify menu navigation while keeping convenient one-touch calibration. The new housing is compatible with lanyards to prevent losing or dropping, but is still waterproof and Floats just in case. Upgrades to design and function won't break the bank conductivity, TDS, and salinity in one meter expanded 4-digit dual-line display shows conductivity and temperature readings simultaneously additional key provides an easier, more intuitive interface improved cap functions as a sample cup and as a stabilizing base to stand the meter upright IP67-rated housing is waterproof and Floats.

• Display type: dual-line lcd
• Max salinity: 10.0 ppt
• Min salinity: 0.0 ppt
• Tds resolution: 10 ppm, 0.1 ppt
• Temperature compensation: automatic

User questions & answers

Question:	Where is the menu to set it up to read the salt level on a pool
Answer:	There’s A 9-volt battery in it. It will last about 3 years easy.
Question:	Does this read ppm of salt
Answer:	Measures all minerals, etc dissolved in water. Not a specific element.
Question:	Can I change temp reading to Fahrenheit
Answer:	kENT, Taken directly from LaMotte's website:Designed for the pool professional. The tester's probe is dipped into a sample of pool water and the results are ready instantly. The Salt PockeTester measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results. The PockeTester is packages in a rugged carrying case with a special calibration standard.
Question:	Can this item test EC value in soil
Answer:	My meter was durable, but after 2-3 years water leaked into the battery compartment and caused corrosion. I've used other salt meters, but bought another LaMotte to replace the damaged one.

Product description

Description:

 Size: 5.5" * 1" * 0.6"

 Salt Range: 0-9990ppm or 0.000-0.999%

 If the meter reads 500 x 10 ppm that means 500 x 10 = 5000 ppm = 0.5%

 Press hold button to keep current reading on display, allowing the meter to be removed from the water and read

 Temperature Range: 1-50 °C (Does NOT display in F)

ONLY will work for Salt Water Pool and Koi Fish Pond Salt level testing!

 CANNOT work for Sea/Marine/Salt Water Fish Tank Salt level testing!

 CANNOT work for Food salt level testing!

CANNOT work for any other application!

 It is NOT waterproof! 

Packaging:

1 x Digital Salt Salinity Tester Meter

• Automatic shutdown function, easy to use.
• The TDS table can acquire test data in 5 seconds, while the digital TDS table has an accuracy of +2% and a measurement range of 0-9 990 ppm.
• TDS pen tester has compact size and light weight, easy to carry.
• The digital TDS tester has the function of ATC, and the test data will not be affected by water temperature.
• Digital Salt Salinity Tester Meter

• [4-in-1 Water Quality Tester] Pen type digital TDS meter, all in one, salt electrode included, easy to use.
• [Automatic Power-Off Function] Salt TDS tester, compact size, lightweight. auto powers off after 5 minutes of non-use.
• [Waterproof Salt Meter] IP67 waterproof salinometer, temperature measurement. data hold function for freezing the desired value.
• [Auto Temperature Compensation] Built-in temperature sensor, ATC (auto temperature compensation). Microcomputer circuit, intelligent function, high accuracy.
• [Multipurpose test] Portable TDS meters can be carried anywhere to measure water quality such as tap water, RO system water, aquarium, seawater, pool water.

Product features

RCYAGO 4 in 1 Salt/EC/TDS/Temp Meter S-100 Salt Meter Salinity Tester Waterproof Saltmeter Salt Gauge Water Quality Measure Tool

S-100 Salt/EC/TDS/Temp Meter

EC

Measurement range: 0 to10000uS/cm 10.01-19.99ms 20.1-400mS/CM

Resolution: 1 uS/cm; 0.1 mS/CM

Accuracy: ±2% of reading

TDS

Measurement range: 0 to 1000ppm 1000ppm to 10000ppm 10.1 to 200.0ppt

Resolution: 1ppm; 0.1ppt

Accuracy: ±2% of reading

Salinity

Measurement range: 0.00 to 25.00%

Resolution: 0.01%

Accuracy: 0.01-5.00% (±0.1%) 5.10-25.00% (±1%)

Product description

Hach 9531600 Pocket Pro Salinity Tester

User questions & answers

Question:	Can it be used for fishing
Answer:	This is a simple but very reliable tester that measures the Total Dissolved Solids (TDS) in water. It gives a reading in parts per million (ppm) of all the dissolved solids, good or bad. ... The number you see is the TDS (Total Dissolved Solids) of the water expressed in PPM (parts per ...Water!
Question:	Is this tester water proof or water resistant
Answer:	This is a parts per million meter. It goes from zero to some number. It measures the concentration of particulates in the water. PH meters measure acidity and alkalinity. Numbers below 7 are acid, above 7 is alkaline
Question:	Instructions for calibrating seem confusing for home use RO water? Is there aproduct already calibrated & reliable & not hundreds
Answer:	what did the tap water tds read? what did the fridge filtered water tds read? what did the water drop filter tds? If you cannot get a sample of reverse osmosis water to test (it should read about 40 tds or less), get some distilled water from a pharmacy to test. This will give you a baseline. I would not expect any of the drip style or cartridge style refrigerator filters will do much to remove hardness as they tend to rely on activated carbon which is better at removing chlorine (among other chemicals) and organic compounds.
Question:	How often do you need to re-calibrate? Is there a shelf life for the calibration liquid? Is there an alternative calibration product
Answer:	You cant. It works perfectly fine it's the tap water levels. Try testing your bottled water. See if it doesnt do that. If so send it back for a newer one.

Product description

Designed for the pool professional. The tester's probe is dipped into a sample of pool water and the results are ready instantly. The Salt PockeTester measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results. The PockeTester is packages in a rugged carrying case with a special calibration standard.

User questions & answers

Question:	What makes this tester better than the others that can be bought at a fraction of the cost
Answer:	It is inside the product packaging.
Question:	Have you found it durable and reliable
Answer:	the reading comes up as 3.10 and I put it on my paperwork or the customers note as 3100... so it is just a matter of moving the decimal to get the ppm readings
Question:	Does this come with a case, test cup, and calibration fluid
Answer:	The Oakton EcoTestr CTS Pocket Conductivity, Salinity, and TDS Meter can be changed to Fahrenheit, please see the directions below: 1. Press menu button to enter the Setup Menu and ‘PArA’ will appear. 2. Press menu button to toggle from ‘PArA’ to ‘dEg’. 3. Press return button and ‘dEg C’ will appear for selection. 4. Press menu button to toggle between ‘dEg C’ & ‘dEg F’ for selection. 5. Press return button to accept & display showing ‘donE’ to confirm the new selection & return to ‘dEg’. 6. To exit from Setup Menu back to Measurement Mode, press cal/esc button to escape.
Question:	Does this rest ph as well
Answer:	Yes it will, but you will want to make sure your sample is a liquid solution by adding deionized water. It will not be able to take a proper reading in a completely dry soil sample.