9 best gps bipods

Product description

Aluminum Bipod Thumble release for Leveling staff and Prism Poles. Fits 1 to 1.25-inch diameter poles from the side or 1.5-inch poles through the top. Legs extend up to 6 feet and collapses to 3.5 feet. Quick and easy set up with carrying bags. Hope you will like it!

• Aluminum Bipod Thumble Release forGps Poles and Prism Poles
• Bipod surveying Fits 1 to 1.25-inch diameter poles from the side or 1.5-inch poles through the top
• Surveying Bipod Legs extend up to 6 feet and collapses to 3.5 feet
• Surveying Bipod Quick and easy set up Easy to carry
• Surveying Bipod Open thumb screw head, Aluminum frame

Product features

CLS22 Aluminum Bipod

Aluminum stand with two/three telescopic struts.

• Thumb release clamp allows convenient adjustment.

• Extended length: 180cm

• Closed length: 110cm

• Diameter 25mm, 18mm.

• With carrying bag and inner box.

Bipod Surveying Thumb Release CLS22 RED

• aluminum Bipod monopod for Leveling staff and Prism Poles
• Bipod surveying Fits 1 to 1.25-inch diameter poles from the side or 1.5-inch poles through the top
• surveying Bipod Legs extend up to 6 feet and collapses to 3.5 feet
• surveying Bipod Quick and easy set up Easy to carry
• surveying Bipod Open thumb screw head, Aluminum frame

Product description

Bipod Surveying Thumb Release, Aluminum Bipod for Prism Poles Surveying and Gps Poles of Total Station GPS GNSS SECO SOKKIA TRIMBLE Aluminum stand with two/three telescopic struts. Thumb release clamp allows convenient adjustment. Extended length: 180cm Closed length: 110cm Diameter 25mm, 18mm. With carrying bag and inner box.

• Aluminum Bipod Thumble Release forGps Poles and Prism Poles
• Bipod surveying Fits 1 to 1.25-inch diameter poles from the side or 1.5-inch poles through the top
• Surveying Bipod Legs extend up to 6 feet and collapses to 3.5 feet
• Surveying Bipod Quick and easy set up Easy to carry
• Surveying Bipod Open thumb screw head, Aluminum frame

Product description

Aluminum Bipod monopod for Leveling staff and Prism Poles. Fits 1 to 1.25-inch diameter poles from the side or 1.5-inch poles through the top. Legs extend up to 6 feet and collapses to 3.5 feet. Quick and easy set up with carrying bags. Hope you will like it!

• Aluminum Bipod monopod for Leveling staff and Prism Poles
• Bipod surveying Fits 1 to 1.25-inch diameter poles from the side or 1.5-inch poles through the top
• surveying Bipod Legs extend up to 6 feet and collapses to 3.5 feet
• surveying Bipod Quick and easy set up Easy to carry
• surveying Bipod Open thumb screw head, Aluminum frame

Product description

Range and prism pole bipod. Side entry head with clamp for quick and easy pole setup. Fits 1” to 1-1/2” (25mm-38mm) diameter poles.

• package height : 13.462 cm
• package length : 114.3 cm
• package width : 16.764 cm
• Product type : TOOLS

Product description

he AdirPro 762-01 and 762-02 are bipods intended for barcode rod and leveling rods. It is a great example of their motto Making Quality Surveying Solutions Affordable.



Made from aluminum, this bipod is super sturdy. Weighing just 4lb the bipod is lightweight, compact, easy to move around, and can be set up in less than a minute. For easy visibility, the AdirPro bipod is available in a choice of 2 colors, red and yellow. It has specially reinforced feet designed to ensure stability on hard, slippery, or uneven surfaces.



The bipod is designed with an adjustable rectangular thumb screw head and a thumb release locking system. The thumb screw clamp can hold a rod 1.57”-2.56” (40mm-65mm) wide. This allows it to be used with most standard leveling rods.

• Easy to carry and set up
• Aluminum Frame, Rectangular Thumb Screw Head
• Fits Rods 1.57"-2.56" (40-65mm) Wide
• Thumb Release, Easy Transitioning
• Available in 2 colors - Red and Yellow. **Prop 65 Warning - Lead and DEHP**

• Made of LIGHTWEIGHT MIL-SPEC hard anodized 6061 T-6 aluminum and Injection-molded polymer; aesthetically pleasing, LOW-PROFILE DESIGN conceals its mechanisms and hardware, smoothly brushing off Snags and bumps
• Optimized for RAPID ONE-HANDED ADJUSTMENTS; quickly and quietly transitions between countless user configurations
• Easily loaded with STABILIZING FORWARD TENSION without fear of failure or warping; at just over 11 oz. , The Magpul bipod is LIGHTER THAN MANY PRICIER BIPODS currently on the market
• SPRING-TENSION LEGS stow neatly forward and snap down and lock into place with ONE HAND; LEG EXTENSIONS slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents
• An INDUSTRY-EXCLUSIVE 50° of TOTAL TILT and 40° of TOTAL PAN are Controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots

User questions & answers

Question:	Will it handle .300 win mag
Answer:	No. Engineered, Designed, Tested, Manufactured and Shipped from right here in the USA.
Question:	Why is the Flat Dark earth cheaper than the Black one? Are they made with different materials
Answer:	Yes. 3 slot is long enough
Question:	Is this made in China
Answer:	4 15/16 - about 5 inches
Question:	I'm wanting to combine this with a "kinect 3-slot rail" for easy on/off. is the 3-slot rail long enough
Answer:	Just under 5 inches long

Product features

Serious Strength, Versatility, and Value

The Magpul Bipod offers serious strength and versatility. Available with your choice of M-LOK, 1913 Picatinny Rail, Sling Stud QD or A.R.M.S. 17S Style mounting connections, the bipod can be mounted to your accessory system of choice. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations.

Durable & Lightweight

The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions. Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

Innovative, Adjustable, & Easy to Use

Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

Functional Feet

Even in the stowed position, the Magpul Bipod has many useful features. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.

Product description

Mountlaser Carbon Gps poles 2 sections extended to 2.5m. Two section is made by carbon fiber,

With 5/8” adapter to accept GPS antenna.Diameter 32mm, 25mm 20minute level vials.

Light weight and easy to carry.With soft bag and inner box.We hope you will like the GPS poles and make great work.

• Gps poles made by carbon fiber, 2m x 2section, connected by 5/8”screw.
• Carbon Gps poles With 5/8”adapter to accept GPS antenna.
• Carbon Gps poles 20minute level vials.
• Carbon Gps poles Diameter 32mm, 25mm 20minute level vials.
• Carbon Gps poles With soft bag and inner box.Light weight and easy to carry.

User questions & answers

Question:	Product description states 20 minute vial - is that included
Answer:	As of right now, the flat dark Earth is 20% more expensive, so I'm assuming it's based on supply and demand.

Product features

Carbon Fiber GPS pole, GPS Poles for Land Surveying & Engineering GPS/GNSS accessory and instruments

Carbon Gps poles 2 sections extended to 2.5m. connected by a 5/8” screw. With a 5/8” adapter to accept GPS antenna. Diameter 32mm. 20minute level vials.With soft bag and inner box. Lightweight and easy to carry. We hope you will like the products and make great work. Lightweight and Durable for year, Hope you will love it in the working days.

Carbon Fiber GPS pole 2m

• Pole made by carbon fiber

• Diameter 32mm,20minute level vials.

• Easy to carry with carry bag.

• GLS24:2m x 4section.

Carbon Fiber GPS pole 2m

• Pole made by carbon fiber, 2m x 2section, connected by 5/8”screw.

• With 5/8”adapter to accept GPS antenna.

• Diameter 32mm.

• 20minute level vials.

• With soft bag and inner box.

Carbon Fiber GPS pole 2.5M

• 2 sections extended to 2.5m.

• First section carbon fiber, second aluminum.

• Diameter 32mm, 25mm,20minute level vials.

• With soft bag and inner box.

Aluminum Gps poles 2M Green

• Pole made by aluminum, 2m x 2 section, connected by 5/8”screw.

• With 5/8”adapter to accept GPS antenna.

• Diameter 32mm.

• 20minute level vials.

• With soft bag and inner bo

GLS26 Carbon Fiber GPS pole 2.6M

• Snap-Lock GPS pole

• One-piece design, two locking system for stability.

• Snap-lock locks at 1.6m, 1.8m and 2.0m.

• With 5/8”adapter to accept GPS antenna.

• Diameter 32mm.

• 20minute level vials.

• Light weight easy to carry.

GLS26 Aluminum GPS pole 2.6M

• Snap-Lock GPS pole

• One-piece design, two locking system for stability.

• Snap-lock locks at 1.6m, 1.8m and 2.0m.

• With 5/8”adapter to accept GPS antenna.

• Diameter 32mm.

• 20minute level vials.

• Light weight easy to carry.

Both Scale

• Snap-Lock GPS pole

• One-piece design, two locking system for stability.

• Snap-lock locks at 1.6m, 1.8m and 2.0m.

• With 5/8”adapter to accept GPS antenna.

• Diameter 32mm.

• 20minute level vials.

• Light weight easy to carry.

Product description

Our high quality carbon fiber bipods are constructed from aircraft grade aluminum components and heavy duty carbon fiber for durability and reliability. Features: Extends to 1.7m (67in) Collapses to 1.1m (43in) Fist all GPS antenna and prisms poles with a 1″ (2.54 cm) to 1.25″ (3.18cm) outside diameter. Weight: 1.3kg/2.9lbs. Thumb release allows for fast adjustment from 42″ to 72″Includes protective bumper to allow for firm lock of prism pole without damage. Adjustable head adapts to pole diameters of 7/8″ to 1-1/2″Custom.

• Extends to 1.7m (67in)
• Collapses to 1.1m (43in)
• Fist all GPS antenna and prisms poles with a 1″ (2.54 cm) to 1.25″ (3.18cm) outside diameter.
• Weight: 1.3kg/2.9lbs.

Product description

New Mini Bipod for Mini Prism Pole,Surveying,Total Station,GPS,topcon,Trimble

• 1. Mini Prism Bipod with solid 10" Aluminum legs
• 2. Very helpful in situations without any assistance
• 3. Sturdy feet that don’t extend renders it lighter and stouter
• 4. Supports taller and heavier products
• 5. Includes a universal head that accepts pole diameters of 1” to 1.25”
• 6. Includes a heavy duty bag and carrying strap

100% BRAND NEW , HIGH QUALITY

Shipping:

Items will be shipped within 2 business day on payment received.

Items are shipped from Hong Kong using Airmail, reach most of the countries within 7 to 20 business days.

Delivery time depends on destination and other factors.

Warranty and Guarantee:

6 months Warranty. Buy with confidence!

If you are not satisfied when you receive your item, please return it within 14 days for a replacement or money back. Please contact me before you return it.

If item is defective in 3 months, We will send you a replacement without extra charge, or offer refund after we receive the defective item.

If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.