12 best fluke infrared cameras

Product description

Visual image and infrared heat map blending help you identify the exact location of the potential issue. Center-point temperature and hot and cold markers let you identify hottest and coldest spots within field of view. Pocket-size design - Handy when you need it; easily fits in your tool bag or pocket. Intuitive interface - Get to work as soon as you take it out of the box. SmartView reporting software enables you to create customizable reports to document your findings or prove repairs have been made.

• Visual image and infrared heat map blending help you identify the exact location of the potential issue
• Center point temperature and hot and cold markers let you identify hottest and coldest spots within field of view
• Pocket size design: Handy when you need it; Easily fits in your tool bag or pocket
• ntuitive interface: Get to work as soon as you take it out of the box; Smartview reporting software enables you to create customizable reports to document your findings or prove repairs have been made
• Alignment option: Near: 23 centimeter (9 inch) from target

User questions & answers

Question:	Does anyone have practical experience with the VT04/VT04A for checking home insulation and air leakage? Will it show me where insulation is missing
Answer:	The thermal resolution of the VT04/VT04A is 45 pixels by 45 pixels which is too low for checking for air leakage or where insulation is missing. I would look at the Fluke TiS40 Infrared Camera which should have sufficient resolution for your application.RobinMFluke Industrial Support
Question:	DOES IT WORK IN THE DARK
Answer:	The thermal imaging function works fine in the dark. Since the video overlay is just a standard video camera, it does not work in the dark. Hope that helps.
Question:	is this good for finding air leaks or missing insulation in my house
Answer:	If the incoming air temperature is colder or warmer than the air in your attic it will work.
Question:	can u toggle off and ont ehvisual range
Answer:	Yes

Product features

Fluke VT04 Visual IR Thermometer

The Fluke VT04 combines the convenience of a spot thermometer with the visual benefits of an infrared camera, in a pocket size tool. It blends a visible light image with Fluke’s exclusive thermal heat map to show temperature patterns that may indicate potential issues. Hot and cold markers highlight the hottest and coldest spots in the field of view. And you can identify intermittent problems by capturing images at specific intervals or when a temperature alarm is triggered.

Capture accurate temperature readings without taking your eyes off the screen. The center measurement box shows the exact area of temperature measurement. Fill the center box with your target and rest assured you're not measuring the background. Identify intermittent problems by monitoring equipment over time or get alerts when a temperature is outside the expected range with temperature alarms and automated monitoring features. Instantly identify the hottest and coldest spots within the field of view with hot and cold markers. Do more with VT04. See more, find more, prove more!

Exclusive thermal heat map blending overlay with IR-Fusion

Blend digital and thermal images to instantly show the exact location of the issue. Blend between 0 %, 25 %, 50 %, 75 %, and full thermal with one button.

Powerful resolution with PyroBlend Plus optics

Best-in-class field of view for tight spaces: 28° x 28°.

SmartView reporting software

Store up to 10,000 images per Gb on included SD card and make professional reports on included professional software.

Temperature alarms and automated monitoring features

Hi/Lo temperature alarm Screen flashes if user-selected temperature is exceeded.

Time lapse image capture automatically capture images.

Auto-monitor alarm automatically capture images after a user-selected temperature alarm has been triggered.

Electrical

Repair and maintenance: Overloaded Circuit Breakers, Panels, Fuses.

Mechanical

Repair and maintenance: Overheated Motor Output, Bearings, Pulleys and Belts

HVAC

Repair and maintenance: Cold Air Dampers, AC Condensers, Expansion Valves, Ducts, Vents in hard to reach areas.

Building

Repair and maintenance: Leaks, Moisture, Air Leaks.

Product description

Get the right blend of infrared, battery life, and analysis No matter if you are all that way up on the roof, deep in a plant or if you have locked out an electrical panel, the Fluke TiS20+ thermal camera gives you the power and features to get your job done fast without extra trips back to the shop or the truck. Designed to make your job quicker and easier this thermal imager is the right tool for: Commercial electricians Heating, ventilation, air conditioning, and refrigeration technicians Maintenance technicians Get context with a combined visual light and infrared image Get the right context of what you are capturing with Fluke IR-Fusion . The continuous touchscreen IR-Fusion takes a visual light image and overlays the thermal image on top of it at different transparencies so that you can know exactly what you are looking at. Simply slide your finger across the screen to adjust the level of infrared that you need. Long battery life so you can get the whole job done The TiS20+ has a battery life of over 10 hours on a single charge. No need to have a backup battery with you or a charger plugged in when you are inspecting systems. You know you can always count on this IR camera to deliver results. You work hard all day, so should your tools You cannot afford to have your thermal imager fail due to your environment. You can sleep easy at night knowing that your camera will hold up to whatever the day throws at you. 2 meter drop tested Water resistant (IP54) Dust resistant (IP54) Stop sorting, start analyzing with Fluke Connect Asset Tagging Don’t spend hours in the office slowly sorting your images, let Fluke Connect Asset Tagging do all of that work automatically. Simply scan a QR code on your asset, capture your thermal image and they will be automatically sorted. Start analyzing your images and creating reports instead of only organizing.

• Fluke IR-Fusion Simply slide your finger across the screen to adjust the level of infrared that you need.
• Battery lifeOver 10 hours of battery life.
• Rugged reliable tool Engineered to withstand a 2 meter drop, water and dust resistant (IP54).
• Fluke Connect Asset TaggingScan a QR code and automatically sort your thermal images by asset.

Product features

Fluke TiS20+ Thermal Imager

The TiS20+ provides 120 x 90 infrared resolution with the ruggedness you would expect from Fluke. This handheld thermal camera is engineered to withstand a 2-meter drop and is both water and dust resistant (IP54). The touchscreen IR-Fusion allows you to quickly get the context of what you are shooting by blending an IR image and a visible light image. This tool also has Fluke Connect Asset Tagging which eliminates hours spent on the computer organizing files by automatically doing that for you.

Get the right context with a combined visual light and thermal image

Fluke IR-Fusion ensures that you can get the right blend of the infrared and visual light image. Simply take your finger and move it across the screen to find the right level of infrared for your job.

Long battery life so you can get the whole job done

The longest battery life of a Fluke Thermal Camera ever! Work continuously for over 5 hours on a single charge.

You work hard all day, so should your tools

Built tough for the harshest environments. The Fluke TiS20+ is engineered to withstand a 2-meter drop and has an IP54 rating for water and dust resistance

Stop sorting, start analyzing with Fluke Connect Asset Tagging

Sort each of your thermal images by asset with Fluke Connect Asset Tagging. Simply scan the QR code on your asset, take all the thermal images you need and they will be sorted automatically.

Product description

Rugged portable thermal camera for industrial inspection. In the right place. At the right time. With the right tool. The bigger the problem, the faster you need to solve it. The new Fluke pocket Thermal Imager puts the power to minimize downtime in everyone’s hands. The first line of defense for easy troubleshooting. Stop fighting fires on the job, start preventing them. On the job, because it does the job. Small enough to carry every day without worry. Always at hand. Stands up to dirt and water. Can survive a 1-meter drop. Now enhanced infrared inspections are right in your pocket for quick temperature scans of electrical equipment, machinery and other assets. Automatically save your images to the right folders. With Fluke connect asset tagging you eliminate the tedium of sorting and organizing your infrared images. By simply scanning your asset’s QR code or bar code, your infrared image and all of your date and time stamped information will be stored to your predefined folders. Send via Wi-Fi or automatically upload once you connect to the network or computer via USB. It's about time. Now you can more efficiently save, find and report on issues before they become problems. Get your preferred level of infrared every time. The 3. 5” LCD touchscreen offers IR-fusion to blend a visible light image with an infrared image to more easily locate problems. Simply slide your finger across the screen to adjust the setting.

• With Fluke Connect asset tagging you eliminate the tedium of sorting and organizing your infrared images by simply scanning your asset’s QR code or bar code, your infrared image and all of your date and time stamped information will be stored to your predefined folder
• Small enough to carry every day without worry, always at hand, stands up to dirt and water, and can survive a 1-meter drop
• The 3. 5” LCD touchscreen offers IR-fusion to blend a visible light image with an infrared image to more easily locate problems, simply slide your finger across the screen to adjust the setting
• Fully radiometric thermal imager with 120 x 90 pixel infrared resolution

User questions & answers

Question:	is it wall penentrating
Answer:	No, thermal imagers only capture surface temperature.

Product features

Fluke Pocket Thermal Imager

The handheld compact PTi120 Pocket Thermal Camera is the first line of defense for easy troubleshooting in industrial and residential spaces. Quickly and easily scan electrical panels, motors, and HVAC systems for hotspots or temperature differences so you can solve the problem fast. The touchscreen continuous IR-Fusion gives you the exact mix of thermal and visual light images you need to identify the problem and where that problem resides.

On the job, because it does the job

Compact so it can fit anywhere in your backpack, vest, shirt, pocket, or tool belt. Easy to operate and little to no training needed, just point shoot and fix. Temperature checks of electrical equipment, machinery, and HVAC systems are right in your pocket

Automatically sort your images

Cut down your time at the computer sorting thermal images down to zero with Fluke Connect Asset Tagging. Now it is as simple as grabbing your Fluke PTi120 Pocket Thermal Camera, scan any assets QR code and all your thermal image information will be stored in one folder for each and every asset. Come back to the office, plug your camera into your PC and fire up Fluke Connect Desktop and watch as your files are sorted perfectly in an easy to navigate way.

Get your preferred level of infrared every time

The touchscreen on this thermal camera offers continuous IR-Fusion. Slide your finger across the screen to get the exact percentage of thermal and visible light image, its that easy.

Rugged portable thermal camera for industrial inspection. In the right place. At the right time. With the right tool.

The bigger the problem, the faster you need to solve it. The new Fluke Pocket Thermal Imager puts the power to minimize downtime in everyone’s hands. The first line of defense for easy troubleshooting. Stop fighting fires on the job, start preventing them.

Product description

IP54 rated for water and dust resistance. Features. Withstands a 9.8 foot drop Test. Temperature range 62 Max 22 to 932 Max 22 to 1202. Adjustable emissivity. High and low alarms. Dimension 6.8 x 3.3 x 2.9 in.

• Infrared thermometer for non-contact surface temperature measurement for use in monitoring electrical, mechanical, HVAC, and automotive systems
• Measures temperature from 30 to 650 degrees C (22 to 1202 degrees F) with an accuracy of + or 1 degree C or + or 1.0 percent of the reading from 0 to 650 degrees C
• Dual lasers rotate to pinpoint the edges of the measurement area
• Displays the minimum, the maximum, the difference between the two temperatures, and the average temperatures
• Certified IP54 for protection against dust and splashing liquid
• Small and lightweight, making it easy to clip to your tool belt or belt loop
• Precise laser technology makes for more accurate and repeatable measurements

User questions & answers

Question:	I have figured how to set most everything but does anyone know what "tr i9" refers to for item #7 in the manual? Fluke is not much on words
Answer:	This is the most confusing part of the manual (since its all pictograms w/o any text describing it). What the trig setting (on or off) does: If set to "on" then the unit will, if the trigger is held in for 10+ minutes, shut off after 10 minutes. No effect on normal usage. The normal operation is press trigger, let go, read the display... 5-6 seconds later the unit shuts off. But if you toss it in your tool bag, pocket, etc and happen to depress the trigger and it stays that way, it will shut off after 10 minutes - to save battery life. I'd have like to seen a configurable time, or a smaller time - 10 minutes seems excessive. Anything over a minute seems excessive to me.
Question:	i cant decide on this or the 62 max - any words of wisdom
Answer:	Fluke's web site shows that the Max+ is better in every respect except battery life with laser and backlight on (10 vs. 8 hours) but Amazon inverted the prices today so there's no trade-off to make:Top-end: 500 versus 650 °CAccuracy above 0 °C: greater of ±1.5 °C or ±1.5% versus greater of ±1.0 °C or ±1.0%Response Time: Optical Resolution: 10:1 versus 12:1Repeatability: greater of ±0.8% of reading or For my uses measuring attic temperatures, fry pans, fuse boxes, computer chips, hard drives and compact florescent bulb ballasts that seem to get hot before failing, either model would be fine. I hope that getting a Fluke means that this will tolerate static electricity and drops better and maintain accuracy as the battery wears down or the sensor ages so the specs actually mean something.
Question:	Does this unit adjust for emissivity
Answer:	According to the manufacture's website the Max Plus can be manually adjusted for emissivity in a range from 0.1 to 1.00
Question:	Is this made in the USA
Answer:	In the battery compartment of my Fluke 62 MAX+, it states that the unit was made in China in June 2012. Hope this helps.

Product features

Fluke 62 MAX+ Infrared Thermometer

Everything you’d expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard-to-reach areas for repair and maintenance.

Fluke has built this small and easy-to-use infrared thermometer with the durability and accuracy you need to do your job—all within your budget. These IR thermometers offer precise laser technology for accurate and repeatable measurements.

Electrical

-Electrical panels.

-Wiring and cables.

-Ballasts and bus bars.

-Electrical outlet boxes.

-Oil-filled transformers.

Mechanical

-Motor rise over ambient.

-Hydraulics.

-Gears.

-Shaft alignment.

-Bearings.

HVAC

-Duct leakage.

-Supply/return register.

-Air balance/ stratification.

-Liquid flow through pipes.

-Insulation.

-Blower motors.

-Roofs.

Predictive Maintenance, Hazardous Locations and Process

-Condition Monitoring Trending.

-Mold temperature.

-Oven insulation.

-Pulp and paper machinery.

-Refineries and petrochemical.

-Product temperature (e.g. food).

Product description

The Fluke 59 Series Infrared Thermometer is designed to provide precise laser technology for more accurate and repeatable measurements. It has a large, easy-to-read backlit LCD display for easy viewing. It is small and lightweight design fits easily fits into your tool box. It displays the minimum, maximum or average temperature, or the difference between two measurements. It has Hi and Lo alarms for rapid display of measurements outside the limits. It is powered by one AA battery, and comes with a one year warranty.

• Precise laser technology for more accurate measurements
• Large, easy to read backlit LCD display for easy viewing
• Small and lightweight design fits easily fits into your tool box
• IP40 rated for extra protection
• Precise laser technology for more accurate measurements
• Large, easy-to-read backlit LCD display for easy viewing
• Small and lightweight design fits easily fits into your tool box

User questions & answers

Question:	Can this sensor be used to determine the accurate temperature in an oven
Answer:	It works with g-sync enabled on my 2070; I do have some issues with flickering while it's enabled in cases where the FPS fluctuates in the 60-90 range in windowed mode, but only when the window in question has focus. Other windows and full-screen games work great!
Question:	Why does fluke say 59 Max+ goes to 350C, and your info says 500C
Answer:	The monitor doesn't come with installed speakers. It does have an aux port on the back meant for your gaming headset or speaker.
Question:	Temperature range is missing from the product description
Answer:	Max height is up to 23.62", and max extension is up to 18.34"
Question:	What is the accuracy
Answer:	The extension range is 18.34 - 23.64" from low to high. Please check the picture #5 in the product page for more detail.

Product features

59 MAX Infrared Thermometer

The Fluke 59 MAX Infrared Thermometer delivers a precision thermometer that delivers accurate responsive measurements and fits within your budget. It features an 8:1 distance to spot ratio and precise single laser targeting for accurate and repeatable measurements. Use the Fluke 59 MAX to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, and vents. It is extremely easy to use and compact enough to fit in your hand and your tool bag.

Product description

The Fluke 566 is a two-in-one IR and contact thermometers with an innovative dot matrix display. With a rugged, easy-to-use, ergonomic design, the Fluke 566 two-in-one contact and non contact thermometers can stand up to tough industrial, electrical, and mechanical environments.

• Measure -40°C to 800°C /-40°F to 1472°F (568) or -40°C to 650°C/-40°F to 1202°F (566)
• Easily access advanced features with the soft key buttons and dot matrix display
• Measure smaller objects from further away, with a distance-to-spot ratio of 50:1 (568) or 30:1 (566)
• Compatibility with all standard miniconnector Type K thermocouples allow you to preserve your thermocouple investments
• Confidently measure a wide variety of surfaces, with the adjustable emissivity feature, including a built in material table

User questions & answers

Question:	Does this come with a NIST Certificate
Answer:	no you have to pay extra around $100.00 maybe a little more. I sent mine to acro instruments and got it calibrated and nist cert for $50.00 acro 619-474-7068

Product description

Durable nylon construction protects your thermometer while keeping it within reach. Velcro closures provide quick access and a secure closure. Extra accessory pocket for storing temperature probe. Snap-open loop attaches easily to your belt.

• Infrared thermometer holster
• Durable nylon construction protects your thermometer while keeping it within reach
• Cuff hook attachment closure provide quick access and a secure closure
• Extra accessory pocket for storing temperature probe
• Snap-open loop attaches easily to your belt

User questions & answers

Question:	Can this sensor be used to determine the accurate temperature in an oven
Answer:	Yes:Features:Precise laser technology for more accurate and repeatable measurementsLarge, easy-to-read backlit LCD display for easy viewingSmall and lightweight design fits easily fits into your tool box8:1 distance to spot ratioIP40 rated for extra protectionDisplays the minimum, maximum or average temperature, or the difference between two measurementsHi and Lo alarms for rapid display of measurements outside the limitsPowered by one (1) AA batteryOne year warranty
Question:	Why does fluke say 59 Max+ goes to 350C, and your info says 500C
Answer:	Fluke website says the 59max goes to 350C and the 59max+ reads to 500C https://www.fluke.com/en-us/product/temperature-measurement/ir-thermometers/fluke-59-max Measures temperatures from -30°C to 350°C (-22°F to 662°F) https://www.fluke.com/en-us/product/temperature-measurement/ir-thermometers/fluke-59-max-plus Measures temperatures from -30°C to 500°C (-22°F to 932°F)
Question:	Temperature range is missing from the product description
Answer:	Temperature Range -30°C to 500°C (-22°F to 932°F)
Question:	What is the accuracy
Answer:	Fluke claimed accuracy +/- 2 Deg. C or +/- 2% of the reading - whichever is greater. Temperature Range:- From -30 Deg. C to 350 Deg. C

Product features

59 MAX Infrared Thermometer

The Fluke 59 MAX Infrared Thermometer delivers a precision thermometer that delivers accurate responsive measurements and fits within your budget. It features an 8:1 distance to spot ratio and precise single laser targeting for accurate and repeatable measurements. Use the Fluke 59 MAX to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, and vents. It is extremely easy to use and compact enough to fit in your hand and your tool bag.

Product description

Fluke FLK-VT04-BATTERY Li-Ion Rechargeable Battery for Visual Infrared Thermometer. Test Instruments & Gauges. Country of manufacture: United States. .

• Test Instruments & Gauges
• Country Of Manufacture: United States
• Package Dimension : 13.97 centimeters L x 26.67 centimeters W x 30.48 centimeters H
• Item Package weight : 0.045 kilograms

Product description

Fc Connector, For Use With Fluke Digital Multimeters, Features Wirelessly Transfers Data From The Fluke Tool To Smart Phone, Manufacturers Warranty Length 3 Yr.

• Infrared connector for use with Fluke 189, 289, and 789 multimeters (sold separately)
• Allows wireless data transfer to iPhone or Android smart phone (sold separately)

User questions & answers

Question:	Will the ir3000 fc attached to a meter allow communications to the pc3000 fc pc adaptor
Answer:	I dont think so. It seams o be a reciever only.
Question:	Can you download previously logged data from a fluke
Answer:	No. I own both the 289 and tried this exact thing - only live data can be captured with a 10 minute app limit on FlukeConnect app. Other models with FC built-in support previous capture data download, this unit for whatever reason does not and this need was brought up 4 years ago on the Fluke website, yet it has fallen on deaf ears at Fluke.
Question:	Will this work with Fluke
Answer:	I doubt it. The meter needs a optical connection at the top that the connect latches on to.
Question:	Will this product work with a Fluke
Answer:	F789 sends directly via Bluetooth to the device that has Fluke connect app installed. IR3000 is useless for that meter

Product features

Fluke ir3000 FC Connector

The Fluke Connect ir3000 FC Connector allows you to wirelessly transfer data from your existing Fluke tools to your smart phone using Fluke Connect. The ir3000 allows you to graph, save, and share the tool’s readings with your team instantly from your smart phone. Identify and diagnose problems quickly and confidently. Safely and efficiently capture real-time readings of your tool’s primary display from the field.

Work safer, smarter and faster with Fluke Connect enabled wireless test tools

With the Fluke Connect software and Fluke Connect-enabled tools you can view multiple measurements from a safe distance. Set up multiple modules and then step out of the hazard zone to remotely view all measurements simultaneously on a Fluke Connect tool or mobile device.

Monitor trends of key assets to reduce maintenance time and increase uptime

View different measurements—thermal, mechanical, electrical and vibration, from the same piece of equipment at the same time. Seeing the interactions among multiple measurement points can help you spot problems quicker. You can automatically record measurements and upload them to a PC or the cloud for further analysis and reporting. Securely share or email baseline data from the field to quickly identify anomalies and resolve problems.

Collaborate with colleagues in real time

Onsite technicians can share measurements, graphs and even thermal images with team members located anywhere via the Fluke Connect ShareLive video call. Everyone on the call can see the same live data and images on their smart phones. Decision makers can see all the information they need to issue a work order so technicians can move forward with repairs without leaving the field. That saves extra trips back and forth to the office and helps ensure problems are resolved faster with less downtime.

Improve safety

Remotely view real time electrical measurements for improved safety.

Increase productivity

Make short work of routine maintenance and troubleshooting. Log and monitor live measurements from multiple test points at the same time.

Enhance collaboration

Share live measurements and images with team members at other locations to get troubleshooting help and quick work order approvals.

Product description

FLUKE FLK-TI-TRIPOD3 Tripod. Return policy: Item is non-cancelable and non-returnablePrice For: Each 1.

• country of origin:United States
• package height : 33.02 cm
• package length :15.24 cm
• package width :25.4 cm

Product description

• Fluke 54 II B dual input digital thermometer can log up to 500 points of data to internal memory. Fast response and laboratory accuracy (0.05% + 0.3°C). Buy N
• Large backlit dual display shows any combination of T1, T2 (52 and 54 only), T1-T2 (52 and 54 only), plus MIN, MAX, or AVG
• Recall function allows logged data to be easily reviewed on the meter display
• Infrared USB communication port allows data to be exported to optional FlukeView Forms Temperature PC software for further analysis and graphing
• Data Logging up to 500 points of data with user adjustable recording interval

User questions & answers

Question:	Description says '-418 to 3212 degree f range'. what other product do i need to purchase to get the full range up to 3212 degrees f
Answer:	I don't think so. This requires a USB C connector type.
Question:	Does this come with a case
Answer:	Probably not. The phone would not have enough power to power the monitor.
Question:	Is this the original 54-2 as shown in the picture, or the 54-2-B that Fluke replaced it with in
Answer:	Yes atleast to me it is ultra wide, I think you'll be happy with it
Question:	Does this meter ship with nist calibration certifications
Answer:	Yes.

Product description

• Charge With The Fluke Charging Base (Sold Separately) Or With The Thermal Imager When Plugged In To Ac Power
• Charge with the Fluke charging base (sold separately) or with the thermal imager when plugged in to AC power
• Package Weight : 0.8 pounds
• Package Dimensions: 18.034 L x 13.716H x16.002W(centimeters)

User questions & answers

Question:	Hi! where can i download msdc
Answer:	If it has a USB-C port, probably. I'm using it with an Inspiron 7570