14 best fluke emf meters

• Detects all three types of EMF pollution: AC magnetic, AC electric, and RF/microwave
• Peak Hold captures fast pulses, for measuring fast digital signals
• 3-axis AC magnetic field, 1-axis AC electric field, 1-axis RF (reads all existing 5G, etc.)
• Fast indicator bar quickly shows hot spots, and adjustable backlight
• 1-Year Manufacturer Warranty

User questions & answers

Question:	Will this work in India/ Europe
Answer:	Yes, this meter will work anywhere in the world. This one version will measure both 50 and 60Hz power regions.
Question:	Will this pick up UHF and microwave
Answer:	Thank you for your question. This meter will detect all three types of electromagnetic pollution.; AC magnetic, AC Electric and RF/Microwave.
Question:	Does this pick up emf/rf at a distance, or do you have to hold it right next to the source
Answer:	This meter will pick up EMF/RF at any distance, as long as the field is strong enough.
Question:	Does this read digital RF from cellphone towers, wifi, wireless LAN, etc
Answer:	The TF2 RF section is great for measuring the EMF emissions of cellphone towers, Wi-Fi and mobile phones. When reading RF emitted by digital devices, such as mobile phones, Wi-Fi routers and smart meters, the Peak Measurement (small numerals in the upper-left of the display) is of more interest than the Field Measurement (large numerals at the bottom). The information from digital RF devices is transmitted in brief packets that occur irregularly (perhaps once per minute with smart meters and several times per second with Wi-Fi transmitters or mobile phones that are in use). The Peak Measurement detects these packets and displays the strongest packet for several seconds before resetting itself.

Product features

New Features and Improved Specifications

• Easy to use: just turn the knob to the type of field to be measured
• Detects all three types of EMF pollution: AC magnetic, AC electric, and RF/microwave
• Large LCD for crystal clear, accurate readings with adjustable backlight
• Peak Hold captures fast pulses, for measuring fast digital signals
• Sensitive RF mode for measuring mobile phones and Wi-Fi EMF
• AC magnetic measurements are 3-axis, allowing for quick readings, regardless of meter orientation
• Unique feature-- does both standard AC readings and weighted (emphasizes high frequencies)

Specifications

Product description

The Fluke T+PRO electrical tester offers all the functionality that electricians look for in volt meters and voltage and continuity testers. The T+PRO has three ways to detect ac/dc voltage: light, sound, and vibration. It offers the added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight. The T+PRO electrical tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 K ohms, as well as a backlit LCD display for easier viewing. Safer than traditional solenoid testers, the T+PRO is rated CAT IV-600 volt, CAT III-1000 volt, and complies with NFPA 70E*. The Fluke T+PRO electrical tester is sold one item per package, and is covered by a two year warranty. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. As electrical systems grow more and more complex, spikes, transients, surges, and sudden over voltage events become more common. These can trigger a sequence of events that may lead to serious injury. This is why test equipment must be designed to protect people who work in this high-voltage high-current environment.

From the Manufacturer

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. As electrical systems grow more and more complex, spikes, transients, surges, and sudden over voltage events become more common. These can trigger a sequence of events that may lead to serious injury. This is why test equipment must be designed to protect people who work in this high-voltage high-current environment. The Fluke T+PRO electrical tester offers all the functionality that electricians look for in volt meters and voltage and continuity testers. The T+PRO has three ways to detect ac/dc voltage: light, sound, and vibration. It offers the added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight. The T+PRO electrical tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 K ohms, as well as a backlit LCD display for easier viewing. Safer than traditional solenoid testers, the T+PRO is rated CAT IV-600 volt, CAT III-1000 volt, and complies with NFPA 70E*. The Fluke T+PRO electrical tester is sold one item per package, and is covered by a two year warranty.

• Backlit LCD display for easier viewing
• Display resolution of 0.1 V, ideal for troubleshooting low-voltage lighting
• Resistance (Ohms) to 9.99 kOhms
• Rotary Field Indication
• Display Hold for easier viewing in hard-to-test areas

User questions & answers

Question:	Hi, is the voltage display on LCD represent low or high impedance value? Let me clarify...if you detect a ghost voltage, say, 60vac, it obvious will not lite nor vibrate the meter, will the LCD display ghost voltages or just show 0 volt
Answer:	These leads are not removeable.
Question:	is this good for ghost voltage like a wiggy
Answer:	Can't provide a specific response to your question. However, I find the leads adequate for most things I use it for. This is a great tool!
Question:	Can I remove the test leads and plug in my own Fluke test leads
Answer:	yes it does beep. I am not certain if you will want to purchase this; I bought mine after having this same model for roughly 10 years. it had served me well, so I thought I would repeat that with another one. The new one did not last a year and ideal would not replace it. I used it for work about once a week and had it protected in my toolbox and it just died. Replacing the batteries did nothing for it, so for now I am using a much more expensive tester for the grunt work until I find need to just get a new simpler one like this one.
Question:	Are the test leads long enough to test a 220 dryer outlet receptacle
Answer:	Touch leads together to confirm continuity, and also test leads on a known true voltage - then test on your circuit in question.

Product description

600V Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable Slim Reach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Rugged enough to withstand a 10 foot (3m) drop. The T5 meets safety category: UL, CSA, CE, and VDE. 600V AC/DC Voltage. 100A AC Current. Continuity: less than 25 ohms. 1000 ohms Resistance. 45 to 66 Hz Calibration Frequency. 0.5" Jaw Capacity. 1000 counts. Auto ranging, audible continuity, data hold and auto power off features. LCD displays. AC current accuracy: +/ 1.5 percent + 2 Digits. 14 to 122 Degrees F Operating Temperature. AA Batteries. Safety Rating: CAT III 600V. Batteries and instructions included.

From the Manufacturer

The Fluke T5-600 600V Voltage Continuity and Current Tester lets you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. The tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. The T5-600 automatically measures volts ac and volts dc with precise digital resolution and displays resistance to 1000Ω. The tester is rugged enough to withstand a 10-foot (3m) drop. The test leads accept Fluke accessory test clips. An auto off mode helps to conserve battery life. Optional holster attaches to a belt and neatly stows test leads. All inputs of the T5-600 are protected to EN61010-1 CAT III 600V and the T5-1000 to EN61010-1 1000V CAT III rating. UL, CSA and VDE listed. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

• Automatically measures volts ac and volts dc with precise digital resolution
• Displays resistance to 1000Ω
• Easy and accurate OpenJaw current measurement
• Optional holster attaches to a belt and neatly stows test leads
• Can stay connected much longer than solenoid type tester

User questions & answers

Question:	Are you really sure about tenth of a volt? Manual says 1V resolution, and I own one of these and can't make it show tenths, DC or AC
Answer:	I don't currently have one of these. But, the spec sheet indicates .1A resolution on the current measuring (A) scale. All of the voltage scales have 1 V resolution.
Question:	Does the screen light up
Answer:	No it doesn't... That's my only issue
Question:	Is there any way to mount a TPAK hanger on a T5-1000? I would definitely purchase this if I could hang it off the side of a rack in a data center
Answer:	What a good convenient meter. Unfortunately the only way to hang it is if you improvise your own solution. Perhaps the accessory pouch available for the meter would be a good starting place.
Question:	does this read dc amps
Answer:	No, it does not read DC amps. AC amps only. I almost bought a T5-600 based on the misleading answers to this question. Got a 362 instead - the 362 measures DC amps (the T5 series doesn't), and the 362 has one decimal for voltage - the T5 doesn't.

Product features

Fluke T5-600 Voltage, Continuity and Current Tester

Fluke T5 Electrical Testers let you check voltage, continuity, and current with one compact tool. Select volts, ohms, or current and the tester does the rest. OpenJaw current checks up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes.

Multifunctional

Test voltage, continuity and current all in one electrical tester. For safety and convenience the Fluke T5-600 comes built with auto select between AC and DC voltage.

OpenJaw current readings

Use the Fluke T5-600 OpenJaw to measure current without contact or breaking the circuit with a 12.9mm or 0.5 inches diameter wire.

Measure without breaking the circuit

Easily check amperage on appliances, motors, compressors and other equipment with the Fluke T5-600 without breaking the circuit.

Rugged and reliable

The go-to tool for electrical and HVAC troubleshooting the T5-600 is extremely rugged. Rugged enough to withstand a 10 ft (3 m) drop to make sure it lasts tough job site.

Product description

A maintenance and calibration tool that will be at home in every instrumentation technician’s tool box, the Fluke 787 process meter" combines a DMM and a loop calibratora in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the 787 adds the ability to measure, source, and simulate DC loop current with 0.05 percent accuracy and 1 MA resolution.

From the Manufacturer

Fluke corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. These can trigger a sequence of events that may lead to serious injury. This is why test equipment must be designed to protect people who work in this high-Voltage high-current environment. The fluke 787 processmeter is a maintenance and calibration tool that will be at home in every instrumentation technician's tool box. The fluke 787 processmeter combines a digital multimeter and a loop calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted fluke 87 dmm, the 787 adds the ability to measure, source, and simulate dc loop current with .05-Percent accuracy and 1-microamp resolution. With 25-Percent manual step plus auto step and auto ramp on ma output, the 787 has 1000-Volt overload protection on voltage, ohms, frequency, and 150-Volt overload protection on ma, backed up by a 440 ma 1000v fuse. The 787 features a clear LCD display with backlight, and weighs less than one pound. The external accessible battery is easy for battery changes. The processmeter runs about 50 hours typical (measurement), 12 hours typical (sourcing 12 ma) on one 9-Volt alkaline battery (included). Also included are the following: a quick reference guide, a manual, a set of ac70a alligator clips, a c81y protective yellow holster with flex-stand, and a tl75 safety-designed test lead set. The 787 is designed in accordance with IEC 1010-1, ansi/isa s82.01-1994 and can/csa c22.2 no. 1010.1-92. The fluke 787 processmeter is sold one item per package, and is covered by a three year warranty.

• 1000v overload protection on v, ohms, frequency, and 150v overload protection on ma, backed up by a 440 ma 1000v fuse
• Runs about 50 hours typical (measurement), 12 hours typical (sourcing 12 ma) on one 9 volt alkaline battery
• 25 percent manual step plus auto step and auto ramp on ma output
• Simulate dc loop current with .05 percent accuracy and 1 micro amp resolution
• Runs about 50 hours typical (measurement), 12 hours typical (sourcing 12 ma) on one 9 volt alkaline battery
• Clear LCD display with backlight

User questions & answers

Question:	Is this true-rms
Answer:	NO，it doesnot come with the tripod,i think we need to buy it by ourself~
Question:	is this product (Fluke 787) a brand new product? Fresh out of the box with 3 year warranty? I just wanted to confirm before purchasing before my job
Answer:	Accuracy can reach plus or minus 1.5 decibels.
Question:	does it come with the alligator clips
Answer:	I tried it on my chrome book, but it didn't work. I had trouble finding the right app that worked. From what I can tell from reviews you have to get an adapter for the iPad. I use it on my Samsung galaxy, it works great!
Question:	Does this come with the ir3000fc infrared connector and software needed for fluke connect
Answer:	I've tried many different ways and couldn't find a way to hook up to smart T. V.

Product features

Fluke 787 ProcessMeter Digital Multimeter

The Fluke 787 ProcessMeter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. It's a maintenance and calibration tool that will be at home in every instrumentation technician's tool box.

Other useful features:

DMM and a loop calibrator in one rugged, handheld tool

It puts a complete solution for troubleshooting and calibrating current loop applications in the palm of your hand so you can get more information, faster and easier.

What's in the box:

• AC70A Alligator Clips
• C81Y Protective Yellow Holster with Flex-Stand
• One 9V Alkaline Battery
• Quick Reference Guide
• TL75 Safety-Designed Test lead Set

Applications

• Industrial
• Maintenance & Repair
• Test & Measurement

Product description

Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit The Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the new C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT Fluke 1AC II VoltAlert Non-Contact Voltage Tester The next generation-voltAlertAC non-contact-voltage testers from Fluke are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know-voltage is present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home. Simply touch the tip to a terminal strip, outlet or cord. When the tip glows red, and the unit beeps, you know there's voltage in the line. Electricians, maintenance, service, safety personnel can quickly test for energized circuits and defective grounds on the factory floor, in the shop. Continually tests its battery and its circuit integrity with a periodic double flash visual indication using fluke voltbeat technology. It detects line voltage from 90vac - 600vac (1AC-AI-II).

• The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps
• The 117 multimeter features true rms for accurate measurements on non linear loads
• The 117 multimeter features Low input impedance which helps prevent false readings due to ghost voltage
• The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals
• Voltbeat technology and continuous self-test - so you always know it is working
• Upon detection, tip glows and beeper sounds
• CAT IV 1000 V for added protection
• Range 90-volt to 1000-volt

User questions & answers

Question:	Looks like the 117 includes a non-contact voltage detector. does that mean i don't need a separate non-voltage detector, i.e. 2ac av tester
Answer:	1. Carefully plug the microphone head in 1/2 inch hole of standard sound source(94dB@1KHz); 2. Turn on the power switch of standard sound source(94dB@1KHz), use straight screwdriver to adjust potentiometer located in the opening hole within the machine stick, and make LCD display 94.0. Kindly note that the meter has been adjusted properly, the recommended calibration interval is one year.
Question:	Why is the 116 better for hvac guys than the
Answer:	Hi, sorry to inform you that it doesn't record noise. Ejoyous sound level meter will continue to show the sound levels as long as it is on, and It does have a hold feature that allows you to hold the level but can't save the information.
Question:	Made in the usa or china
Answer:	Hi, sorry to inform you that it doesn't record noise. Ejoyous sound level meter will continue to show the sound levels as long as it is on, and It does have a hold feature that allows you to hold the level but can't save the information.
Question:	Does this kit come with test leads & the magnetic meter hanging strap
Answer:	No, it is not waterproof.

Product description

Replacement test lead set for the Fluke 1550B MegaohmMeter. 3 test leads (red, black, green) connected to low-leakage probes. 3 alligator clips (red, black, green). Maximum jaw opening: 26mm (1"). Length (lead only): 2.6m (8.6'). Cat II 1000 V, Cat III 600 V, 5kV DC max (probes). Cat II 1000 V, Cat III 600 V, 20 amps (alligator clips).

• 3 test leads (red, black, green) connected to low leakage probes
• 3 alligator clips (red, black, green)
• 2.6 meter lead length
• 26 millimeter maximum jaw opening
• Replacement test lead set for the fluke 1550b megaohmmeter

User questions & answers

Question:	Will the tl81a work with fluke 79iii true rms multimeter
Answer:	Yes, The on/off switch also can turn on/off back lighting making the display fully visible.

Product description

The t6 1000 with field sensor technology lets you measure AC voltage and AC current with or without Test leads. Its compact design lets you access tight spaces that were previously not possible. With field sense selected, slide the open jaw around a cable and measure up to 200 A and 1000 V without breaking the circuit. The backlit display shows both values simultaneously. Plus, with frequency measuring and resistance measurement up to 100 kω, the T6 is the perfect front line tool for your tool bag.

• Measure voltage with or without test leads
• Be safer: Measure voltage to 1000V through the open fork, without test leads
• Be faster: Not need to open covers or remove wire nuts simultaneously measure voltage and current
• Be more efficient: Simultaneously measure voltage and current
• Be everywhere: 17.8 millimeter open fork is widest in the industry; Measure up to 200 a on 4/0 wires (120 Mm2)

User questions & answers

Question:	can you attach a magnet on the back like other Fluke meters
Answer:	The amp function of the T5-1000 and T6-1000 operate the same way.
Question:	Some of the pics shown, the black clip is shown connected to ground, the meter shows ac volts and current. in other pics only ac volts is shown why
Answer:	Yes, the replacement test lead set is the T5-RLS.
Question:	Does the "clamp-on" amp reading function work like in the T5-1000 (reliably, and without needing a ground
Answer:	https://www.amazon.com/Fluke-90-1000V-Pocket-Sized-Voltage-Detector/dp/B00PR02OHU Your previous reviews indicate it does not beep. Is that in the specs?
Question:	can you replace the test leads
Answer:	It is one tracer

Product features

Fluke T6 Electrical Testers with FieldSense technology

Measure voltage up to 1000 V ac through the open fork, without test lead contact to live voltage.+ Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying as much as 200 A. It will change your job. Safer. Faster. Easier.

The Fluke T6 Electrical Testers

Thanks to the new FieldSense technology, the T6 makes work safer as you can measure voltage up to 1000 V ac through its open fork. Having the capability to measure voltage and current at the same time, together with eliminating the need to open covers or remove wire nuts, allows you to be faster and more efficient when taking measurements. In addition, the open fork is the widest available in the industry and can measure wires up to AWG 4/0 (120 mm2) carrying as much as 200 A.

What type of applications?

Commercial and light industrial electricians can use T6 Electrical Testers for basic troubleshooting, verifying voltage and continuity values as well as testing individual circuits while quickly checking current and voltage measurements without test leads. These devices easily fit in your pocket, making them easy to access on the front-line for electricians of all industries.

Why use the T6 Electrical Tester?

Typically, electricians encounter junction boxes crowded with wires, so finding the right connection point poses a challenge. With the T6-600 or T6-1000 you take measurements by sliding a single conducting wire into the open fork.

T6 Electrical Testers go beyond simple detection. They actually measure ac voltage, current and frequency without test leads. With the use of the provided test leads, the tools are also able to measure ac/dc voltage, resistance and continuity. The T6 testers use proprietary FieldSense technology, which makes measuring the voltage source safer for the electrician or technician performing the test.

How FieldSense Works

FieldSense technology is truly a breakthrough in how voltage is measured. While the technology in the T5 detects a magnetic field to derive an ac current measurement, the new technology detects an electrical field. Fluke Research and Development teams first developed the open-fork voltage sensing technology, which involves transducing and calculating a known signal to derive measurements for the source voltage.

Fluke’s New T6-1000 Electrical Tester – Measure voltage without test leads

Now measure voltage the same way you measure current, without test lead contact to live voltage. FieldSense technology lets you slide the open fork over a conductor and see the voltage level.

Be Safer: Measure voltage to 1000 V ac through the open fork, without test leads.

Be Faster: No need to open covers or remove wire nuts.

Be More Efficient: Simultaneously measure voltage and current.

Be Everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2).

Product description

Simply touch the tip to a terminal strip, outlet or cord. When the tip glows red, and the unit beeps, you know there's voltage in the line. Electricians, maintenance, service, safety personnel can quickly test for energized circuits and defective grounds on the factory floor, in the shop. Continually tests its battery and its circuit integrity with a periodic double flash visual indication using fluke voltbeat technology. It comes with a two year warranty. It detects line voltage from 90vac - 600vac (1AC-AI-II).

From the Manufacturer

The next generation-voltAlertAC non-contact-voltage testers from Fluke are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know-voltage is present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

• Voltbeat technology and continuous self-test - so you always know it is working
• Upon detection, tip glows and beeper sounds
• CAT IV 1000 V for added protection
• Range 90-volt to 1000-volt
• 20-volt to 90-volt AC control circuit model also available

User questions & answers

Question:	Can this determine if a lightbulb socket has power
Answer:	It will always glow when the "hot" side is present. However, if you are missing the neutral to your lightbulb socket your lightbulb will not work, but the instrument will still glow, showing power is present.
Question:	What does this one do better than a non-contact tester at 1/3 of the price
Answer:	It has better build quality, and it's not made in China (to me that means it's less likely to contribute to my death or injury).
Question:	is this better than the klien
Answer:	I find the Fluke's build quality to be better than the Klein. If I drop the Klein, the tail cap falls off and the batteries fly out. I don't have that issue with the Fluke. Also the power button works better, my Klein's button is too sensitive. Also the Fluke I have (the 1AC model) will detect voltage in most tamper resistant receptacles without having to open the shutter, where my Klein will not (some user reported the Fluke is not sensitive but relatively my experience is the opposite). Finally, the Klein and the Southwire are made in China (although the Southwire at least has a LED flashlight built in). The Fluke is not made in China so it is easily worth twice the price to me. You can check out the Fluke and Southwire models at Lowes (and purchase there if you like one or the other). The Klein is often on sale at HD but I really recommend against it compared to the other two.
Question:	What is the difference between fluke 2ac and fluke 1ac-a1-ii
Answer:	The 2ac is the newer model with an "always on" function. It has a button that is used only to ensure that it still has battery power. The 1ac is the older one that can be turned on or off. They both test for voltage presence the same way, but the 1ac has an audible alert function which the 2ac does not have.

Product features

Fluke 1AC II A1 VoltAlert Electrical Tester

Easy to carry in your shirt pocket and with continuous self-test so you always know it’s working, the Fluke 1AC-II non-contact voltage detector allows you to quickly test for energized circuits in the workplace or at home. The VoltAlert AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

The tip glows red and a beeper sounds when voltage is detected

• A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
• Optionally, the beeper can be disabled for use in quiet environments

Continuous self-test so you always know it’s working

• When the tip blinks red you know it’s working properly
• Provides a continual visual indication that the 1AC II is on

90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use

• Wide voltage detection range allows for use in a broad range of applications
• Also available in a low voltage model from 20 V to 90 V AC for controls circuits

Safety features

• Rated to CAT IV 1000 V for added protection
• CE and CSA approved

Product description

• Digital clamp-meter measures AC and DC to 2,000A, AC voltage to 600V, DC voltage to 1,000V, frequency to 1kHz, and resistance to 400 kilohms
• True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
• Clamp with 58mm (2.3 inches) jaw opening fits around large or multiple conductors to measure current without touching or interrupting the circuit
• Inrush current function analyzes the surge current at the startup of motors and other inductive loads to provide accurate, stable measurements
• Meets IEC safety standard 61010-2-032, and is rated for CAT IV installations to 600V and CAT III installations to 1,000V

User questions & answers

Question:	Will the fluke 355 display power factor data? thank you
Answer:	Must buy the Fluke 789/IR3000 Bundle Package for that. Not listed on Amazon. Please call us.
Question:	Can this device record its' readings
Answer:	It only has A... The picture is deceiving.

Product description

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

• PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment
• Sources both AC and DC steady-state voltage - supplies 240 V DC/AC
• A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
• Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
• Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact

User questions & answers

Question:	How do you know if the batteries are getting low or dead
Answer:	The box states that is was made in Taiwan. Very robust unit, like all of Fluke products.
Question:	Can this unit be used with a no-contact voltage detector? Like the Salisbury
Answer:	The Fluke PRV240 is a proving unit to verify that your multimeter is functioning/measuring correctly for AC and DC voltage measurements (240V). With your multimeter you would connect your test leads to the PRV240, view the displayed value, measure the primary voltage source with leads (view displayed value) and then check again on the PRV240.
Question:	What is the country of orgin
Answer:	There is a 3 year warranty starting from the date of shipment of the hardware.
Question:	The voltage is 240v isn't that a lil high for a ldl tester that falls in a Cat 1 so u need arc flash to just to test it in the shop
Answer:	Yes it does! This is what is included with the Fluke 1587FC: - Fluke 1587 FC Insulation Multimeter - Remote probe - Test leads - Alligator clips - K-type thermocouple - Hard case - User documentation

Product features

Fluke PRV240 Proving Unit

The Fluke PRV240 Proving unit is a portable, pocket-sized and battery powered voltage source used to very proper voltage measurement functionality of a multimeter, clamp meter or voltage tester. Check for proper operation of your test tools before attempting to verify either an energized or de-energized source. Using this tool reduces your exposure to shock hazard and arc flash.

Fluke PRV240 Proving Unit

Safely verify that your electrical test tool is operating properly before you conduct any live tests. Use the PRV240 Proving Unit to test your meter against a known live source before and after the actual measurement.

Reduce your risk of shock and arc flash

Using the concept of 'Test Before Touch' using the Fluke PRV240 Proving Unit, you can test your meter against a known live source before the actual measurement. This allows you to verify your test tool without unnecessary exposure to shock or arc flash.

Product description

For the complete solution to HVAC troubleshooting the extra value packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.

• Fluke 116 digital multimeter features built-in thermometer for HVAC applications
• Fluke 116 digital multimeter features micro amps to test flame sensors
• Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage
• Fluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage
• Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on nonlinear signals

User questions & answers

Question:	Will the Fluke 323 measure/capture maximum inrush amps
Answer:	No, the Fluke 323 doesn't have an Inrush function.
Question:	what is the category
Answer:	i did not purchase this Fluke kit, just the 116 meter. I believe the category would be Tools, with the sub category being Electrical Multimeters/Testing Equipment.
Question:	Does the magnetic strap attach to the 323 clamp on meter
Answer:	The magnetic strap is designed to be used with the 116 Multimeter, not the 323 Clamp Meter.
Question:	So this does everything the electrician's kit does + hvac options
Answer:	For the most part, yes. I actually bought this one because of the ability to diagnose flame sensor failures.

Product features

Fluke 116/323 HVAC Combo Kit - Includes Multimeter and Clamp Meter

The Fluke 116/323 HVAC Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general-purpose clamp meter.

The Fluke 116 measures resistance, continuity, frequency, and capacitance. It provides Min/Max/Average readings with elapsed time to record signal fluctuations and is CAT III 600 V safety rated.

True-rms measurements and compact ergonomics make the Fluke 323 Clamp Meter the best general-purpose meter for electricians. It is CAT IV 300 V/CAT III 600 V safety rated.

Fluke 116 HVAC Multimeter

The Fluke 116 was specifically designed for the HVAC professional. Measure voltage, resistance, continuity, frequency, and capacitance all in one tool!

Going beyond your standard multimeter functions, the Fluke 116 also measures temperature and microamps specifically for HVAC applications.

Fluke 323 Clamp Meter

The Fluke 323 features true RMS AC voltage and current for accurate measurements on non-linear signals.

Fluke 80BK-A

With the Fluke 80BK-A integrated DMM temperature probe; no need to carry a separate thermometer.

Measurement range: -40 to 260ºC

Accuracy: +/- 2.2 °C or 2% whichever is greater ((0 to 260 °C)

What's in the box?

TL175 Hard Point Test Lead Set.

ToolPak Magnetic Meter Hanging Strap.

Flexible Cuff Pipe Clamp

Thermocouple.

80BK Integrated Temperature Probe.

80AK-A Thermocouple Adapter.

C115 Deluxe Soft Carrying

Case with Shoulder Strap.

Test leads.

Soft case.

Product description

Digital multimeter fast acting replacement fuse. Nominal current: 440mA. Maximum voltage to ground: 1000V.

• Nominal current: 440mA
• Digital mustimeter replacement fuse
• Package Weight : 0.15 pounds
• Package Dimensions: 19.05 L x 1.016H x13.716W(centimeters)

User questions & answers

Question:	What Size HAS A Unit
Answer:	Hello,Thank you for your message. The Fluke117/323 comes with the follow: 117 TRMS Digital Multimeter w/ Non-Contact voltage detection 323 AC/DC True-RMS Clamp Meter TPAK ToolPak Magnetic Meter hanging Strap C115 Deluxe carrying case with shoulder strap TL175 TwistGuard Test LeadsIf you have any further questions feel free to contact us. Thank you for visiting our store front.Regards,Customer Service
Question:	are these fuses the required for 87V multimeter
Answer:	Yes, the Fluke 787 is a true RMS model. Westtown Tech support
Question:	do the blue 440 mA fuses fit a fluke
Answer:	Hello,Thank you for the message.Please be advised that the unit is brand new, unless stated otherwise and you certainly have a 3 year warranty with the manufacturer. If there is anything else we can help you with, please feel free to let us know.Thank you for using our Store Front.Regards,Jessica J. CurbeloCustomer Service
Question:	Will this fit and work for a Fluke 189 multimeter
Answer:	yes, it was come with the alligator clips. so you don't additional device for hook-up.

Product description

The Fluke 1503 Insulation Resistance Tester is compact, rugged, reliable, and easy to use. Repetitive or hard-to-reach testing is easy with the remote test probe. With its multiple test voltages, the tester is ideal for many troubleshooting, commissioning, and preventative maintenance applications. The tester has an insulation test range of 0.1 MΩ to 2000 MΩ and insulation test voltages 500V and 1000V. The 1503 insulation resistance tester features a AC/DC voltage of 0.1V to 600V, 200 mA continuity, resistance of 0.01 MΩ to 20.00 MΩ, auto power off to maximize battery life, auto-discharge of capacitive voltage for added user protection and large backlit display for easy read measurements. Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection. Remote probe, test leads, probes and alligator clips included with each tester. Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work. Insulation tester includes a remote probe, test leads, test probes, alligator clips and user documentation. Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests. CAT IV 600 V overvoltage category rating for added user protection. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

• Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
• Read measurements easily with large, backlit display
• CAT IV 600 V overvoltage category rating for added user protection
• Remote probe, test leads, probes and alligator clips included with each tester
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work

Product description

The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.

• Current clamps are the ideal tools to extend the current ranges of Fluke tools
• Battery-powered hall-effect probe measures 1 A to 1000 A
• 1mV/Amp output guarantees easy reading on your meter
• Take accurate current readings without breaking the circuit
• 1 year warranty

User questions & answers

Question:	Will this work with fluke 115 dmm
Answer:	The TL81A will work with the Fluke-79 III.
Question:	Will this work with Fluke
Answer:	It will sense AC voltage with no contact if within range.
Question:	Why would I buy this one if the Fluke 376 is cheaper and more complete
Answer:	The only major differences between the 116 and 117 are thermometer and non-contact voltage detection features, the 116 having the thermometer but not non-contact. I would make a conclusion that HVAC technicians would have more use for a thermometer on the job, where electricians have more use for non-contact.
Question:	Does the clamp dictate the counts/sample rate for example? or does using this w/a 100,000 count dmm > a 6000 count all-in1 clamp
Answer:	Mine says designed in USA. I doesn't say exactly where it was made. It is one of the best multimeters you can buy anywhere, regardless of where it was assembled.