13 best bore micrometers

Product description

The Fowler 52-646-300-0 Cylinder Dial Bore Gage with carbide tipped anvils. Measure bores from 2-6". Use a micrometer, caliper or gage block set to reference setting. Self centralizing for accurate measurements.

This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA. Included Components: 1 dial bore gage complete, 11 anvils, 4 spacers, 1 2" extension, instruction. Note : There are 2 empty anvil spots because 1 anvil is already installed in the foot and the largest spot is intentionally left empty.

User questions & answers

Question:	What is the graduation in Inches? Im confused! What decimel point do the line segments between the dial numbers, 0.00x or 0.000x or 0.000x
Answer:	Note : There are 2 empty anvil spots because 1 anvil is already installed in the foot and the largest spot is intentionally left empty.
Question:	Is this tool made in USA
Answer:	read the details it just depnds on what your using it for i.e. more precise is what i took from the details hope that helps
Question:	What is the difference between this item and the one named "Extender Bore Gauge
Answer:	The shaft is approximately 7" long. You won't be able to measuere cam bearings from the fron and it will probably be too long to measure them between the webs of the block. I reccomend a standard internal mike or one that is extended. now for the cylinders, this works every bit as good as the big $$$ ones. Hope that helpls.
Question:	How long is the shaft? Is that a shaft extension that is included? trying to measure installed cam bearings
Answer:	It's a a "dial" bore gage. Calibration is only checking for dial repeatability & damage. It is checked for size with standards at each setup. No previous calibration required.

Product description

● Range: 5/16" - 6" (8mm to 150mm), 6 pc set includes:

● 1 gage: 5/16 - 1/2" range x 4.20" overall.

● 1 gage: 1/2 - 3/4" range x 4.40" overall.

● 1 gage: 3/4 - 1-1/4" range x 4.40" overall.

● 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.

● 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.

● 1 gage: 3-1/2 - 6" range x 5.85" overall.

● Spring loaded with locking knurled knob.

● Get exact sizes of holes, slots, bores, or recesses.

● Gage expands in a hole to be measured (locks in place and then removed to determine final hole size using a micrometer or calipers).

● Contact points are hardened tool steel and precision ground in the end measuring radius.

User questions & answers

Question:

What is the radius on the ends of the telesxoping arms? They look flat

Answer:

• Attaches to keys, purses, luggage, remote controls or anything you want to easily be able to locate • Quickly find your phone with reverse locating that rings and flashes your smartphone, even on silent mode • Locates items up to 150-ft. away and alerts you when you leave items behind • Last known location pinpoints where your device or item was left, even if it is out of range • Doubles as a wireless camera shutter release for selfies and group photos • Water-resistant up to 3-ft.

Product description

The Fowler 54-646-400 X-tender Dial Bore Gauge Set has a measurement range of 1.4 to 6" and gradient spacing is 0.0005"/.001mm. A two-point contact system is used to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. The gauge is self-centering and includes an extension holder. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.

Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

 

What’s in the box:

 

·         Digital Bore Gage (with 2 measuring heads)

·         1 2” extension

·         4 anvil spacers

·         Instructions

·         Fitted case

User questions & answers

Question:	Anyone use this to measure crank bearings without damage? I read a review on a Starrett and person stated that it did damage to the bearings
Answer:	About 6 month
Question:	my guage does not work, the numbers are constanly changing wont 0 or read, I have not use it yet and cant, could a low battery do this
Answer:	About 30 meters ,Radio frequency can penetrate through walls, floors, cushions, leather, etc
Question:	Are the pictures accurate? The photos show missing 2.4", 2.0", 1.4" extensions from the set
Answer:	The sound is more than 80Db，and the light is flashing,In an empty room, you can easily hear this sound.
Question:	I seen a couple reviews that stated the bore gauge required additional tools to obtain the measurements
Answer:	it's just to find the keys

• 4 pc Toolmaker's Inspection Set - includes 1 x 6pc Micrometer set; 1 x 6 Pcs Telescoping Gauge Set; 1 x 6 pc Telescoping Gage Set and 1 x 4 pc Small Hole Gauge Set
• Features of the Micrometer Set: Measuring range of each Mic: 0 - 1'', 1 - 2'', 2 - 3'', 3 - 4'', 4 - 5'', and 5 - 6''; Hardened and ground spindle with carbide anvil ensured durability and accuracy; Super Hard Carbide Tipped; Complete with calibration standards and wrenches; Ratchet handle for precise application of force; Vernier Graduations: 0.0001''; Mitutoyo style Frame -- Solid Casting frame
• Features of the Bore Gauge Set: Range: 2-6'' X 0.0005'', Stem Length: 6''; Chrome plated handle; Includes extension holder & washers; Self-centering; Easily adjustable
• Range of the Telescoping Gauge Set: 5/16'' - 1/2'' (8.0-12.7mm); 1/2 - 3/4 (12.7-19.0mm); 3/4'' - 1 - 1/4'' (19.0-32.0mm); 1 - 1/4 - 2 - 1/8'' (32.0-54.0mm); 2 - 1/8'' - 3 - 1/2'' (54.0-90.0mm); 3 - 1/2'' - 6 (90.0-150.0mm)
• Features of the Small Hole Gauge Set: Half Ball Type; Circul Permanent Magnetic Chuck;Completely assembled with handle; Knurled lock maintains the setting of the measuring arms to permit sizing with a micrometer or caliper.

Product features

Toolmaker's Inspection Set with 2-6" x .0005" Dial Bore Gage, #EGEE-5006, Including one unit of the following items:

• 6 pc Outside Micrometer Set & a Dial Bore Gauge Set
• Features of the Mic Set: Includes 6 Micrometers with measuring range of each Mic: 0 - 1'', 1 - 2'', 2 - 3'', 3 - 4'', 4 - 5'', and 5 - 6''
• Crisp, clear, easy-to-read graduation, accurate to 0.0001''; Hardened and ground spindle with carbide anvil ensure durability and accuracy; Ratchet handle for precise application of force; Mitutoyo style Frame -- Solid Casting frame
• Features of the Bore Gauge Set: Range: 2-6'' X 0.0001'', Stem Length: 6''
• Includes extension holder and fitted case; Chrome plated handle; Insulated grip; Self-centering; Easily adjustable

User questions & answers

Question:	Where does this product originate from? Where is it made
Answer:	No. They are tuned 1 finder to a set of keys.

Product features

6 Ps 0-6" Outside Micrometers & 2-6"x0.0001" Dial Bore Gauge Set, #0906-1006

Including:

• Includes 6 Micrometers with measuring ranges: 0 - 1'', 1 - 2'', 2 - 3'', 3 - 4'', 4 - 5'', and 5 - 6''. #EG00-0906
• and 1 piece 2-6'' x 0.0001'' Dial Bore Gauge Set, Brand New, #EE20-1006

Specifications of the Micrometer set and Bore Gauge:



0 - 6'' x 0.0001'' Ultra-Precision Outside Micrometers 6 Pcs/Set, #EG00-0906:

​

• Crisp, clear, easy-to-read graduation, accurate to 0.0001''
• Hardened and ground spindle with carbide anvil ensure durability and accuracy
• Super Hard Carbide Tipped
• Complete with calibration standards and wrenches
• Ratchet handle for precise application of force
• Lock nut
• Powder coated baked finish
• Fitted wood padded case included!
• Vernier Graduations: 0.0001''
• Mitutoyo style Frame -- Solid Casting frame
• Includes 6 Micrometers with measuring ranges: 0 - 1'', 1 - 2'', 2 - 3'', 3 - 4'', 4 - 5'', and 5 - 6''
• Includes wood case, adjustment wrench and calibration standards

2-6'' x 0.0001'' Dial Bore Gauge Set, Brand New, #EE20-1006

• Includes extension holder and fitted case
• Chrome plated handle
• Insulated grip
• Self-centering
• Easily adjustable
• Range: 2-6'' X 0.0001'', Stem Length: 6''

Product description

【ACCURATE MEASUREMENT】The Product Measurement Range Is 2"-6", Grad: 0.001", The Dial Scale Is Clear, And The Reading Is More Accurate

【EFFICIENT AND WEAR-RESISTANT】Dial Gauge With Hard Alloy Contacts Can Prolong Wear And Improve Wear Resistance, Making The Product More Durable

【INSULATION AND ANTI-SLIP】Bold Heat-insulating Handle Design, Heat- insulating And Anti-slip, Eccentric Locking Device, More Stable Clamping Table

【HIGH SENSITIVITY】Replaceable Probe, Suitable For Measuring Holes With Different Diameters And Depths

【AFTER-SALES SERVICE】If You Encounter Any Problems During Use, Please Contact Us To Provide You With Professional Technical Guidance To Help You Use It Better。Unconditionally return or replacement for any quality problems and life-time friendly service support for you.

• 【ACCURATE MEASUREMENT】The Product Measurement Range Is 2"-6", Grad: 0.001", The Dial Scale Is Clear, And The Reading Is More Accurate
• 【EFFICIENT AND WEAR-RESISTANT】Dial Gauge With Hard Alloy Contacts Can Prolong Wear And Improve Wear Resistance, Making The Product More Durable
• 【INSULATION AND ANTI-SLIP】Bold Heat-insulating Handle Design, Heat- insulating And Anti-slip, Eccentric Locking Device, More Stable Clamping Table
• 【HIGH SENSITIVITY】Replaceable Probe, Suitable For Measuring Holes With Different Diameters And Depths
• 【AFTER-SALES SERVICE】If You Encounter Any Problems During Use, Please Contact Us To Provide You With Professional Technical Guidance To Help You Use It Better。Unconditionally return or replacement for any quality problems and life-time friendly service support for you.

Product description

Features:

High quality alloy measuring heads can be used for various internal size measurement, fine workmanship and no burr. Clear laser marking line for convenient reading. The main micrometer body is made of stainless steel with chrome plated surface, wear-resisting and durable. Designed with locking device, precise machinery structure make it more intuitive and convenient to read. Built-in ratchet stop device ensures accurate repetitive readings.



Specifications:

Type: Inside micrometer

Measuring Range: 5mm~30mm

Material: Stainless steel

Precision: 0.01mm

Weight: 268g(approx.)



Zeroing:

Clean the surface of measuring anvil heads with a soft cloth, then rotate measuring device to make two measuring surface contact. If two zero lines of differential sleeve and fixed barrel do not alignment, use the following two methods to adjust.

Method I, if the error is less than 0.02mm (0.001"), use ratchet stop to lock screw tightly, then use wrench to pull fixed barrel till two zero lines alignment.

Method II, if the error is greater than 0.02mm (0.001 "),

Step1, use ratchet stop to lock screw tightly, then use wrench to loosen the ratchet stop and remove differential sleeve.

Step2, re-align zero lines of fixed barrel and differential sleeve, then put ratchet stop back on. If necessary, adjust it again using method I.

Note: There is no need to calibrate micrometer during common use. Micrometer only need calibration when it is severely worn.



Package Includes:

1 x Inside Micrometer

1 x Wrench

1 x Calibration Ring

1 x Packing Box

• 【PREMIUM QUALITY】This inside micrometer kits is made of superior stainless steel with chrome plated surface, wear-resisting and durable, not only bring you a better experience but also provide a longer service time.
• 【PRECISION】Clear laser marking line for convenient reading, measuring faces are fully hardened, precision ground and microlap finished to assure exceptionally accurate measuring. Measuring range is about 5mm~30mm, accurate is 0.01mm.
• 【PACKAGE LIST】If you purchase this product, you will receive 1x inside micrometer+1x wrench+1x calibration ring+1x wooden packing box.
• 【APPLICATION】The internal diameter gage gauge is great for measure the hole, groove depth and height of the workpiece and etc.
• 【SERVICE】If there is any questions, please feel free to contact with us without hesitation, we aim to provide a better range of services.

Product description

The Fowler 54-646-500-0 X-tender Dial Bore Gage Set has a measurement range of 1.4 to 6" and indicator graduation is 0.0001". A two-point contact system is used to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. The gage is self-centering and includes a 2” extension holder. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at various depths, while internal micrometers can only measure to the depth of their contact surfaces. Bore gages are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display it through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, indicating how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with repeatable results from one operator to another. Bore gages can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

What’s in the box:

• Digital Bore Gage (with 2 measuring heads)

• 1 2” extension

• 4 anvil spacers

• Instructions

• Fitted case

User questions & answers

Question:	Can anyone confirm that this gauge has a graduation measurement of .0001"? Fowler website says .0005" in description
Answer:	Yes, all transmitters and receivers are interchangeable.
Question:	Are there suppose to be 3 open spots in the case? left 1.4, right
Answer:	The size of the tag is 1.85*1.26in, the fire stick remote control is a little small to attach.
Question:	What is the country of origin
Answer:	I don’t know, This was a gift

Product description

Descriptions:

The bore gauges are used to measure internal dimensions of work pieces by comparative method.These series bore gauges are equipped with a good guiding protective bridge which can be self-centering exactly and reliably, and measuring range is 50-160mm

Features:

The bore gauges are used to measure internal dimensions of work pieces by comparative method. These series bore gauges are equipped with a good guiding protective bridge which can be self-centering exactly and reliably. The moveable anvil on one side and an interchangeable on another side , which serves for setting the bore diameters. This dial bore gauge 's measuring range is 50-160mm Easy to measure, and with high accuracy, which is 0.01.

Specifications:

Material: metal

Type: inner diameter scale

Measure range:50-160mm

Accuracy: 0.01

Weight:1211g

Package Include:

1 x Dial bore gauge

12 x Measuring head

1 x Extension rod

4 x gasket

1 x set small accessories

• The bore gauges are used to measure internal dimensions of work pieces by comparative method
• These series bore gauges are equipped with a good guiding protective bridge which can be self-centering exactly and reliably
• The moveable anvil on one side and an interchangeable on another side , which serves for setting the bore diameters
• This dial bore gauge 's measuring range is 50-160mm
• Easy to measure, and with high accuracy, which is 0.01

Product description

iGaging Inside Hole Micrometer 2.50-3.00" 62-75mm Inch/metric Digital Electronic 3-Point Bore Gauge Resolution 0.00005"

Precision made by iGaging

Features:

• SPC Output
• Range: 2.441-2.953"/62-75mm. Resolution: 0.00005" / 0.001mm. Accuracy: 0.00020"
• Carbide measuring surfaces
• Contact points are designed to allow measurments near the bottom of a blind hole
• Setting/Calibration Ring Included
• Friction Thimble.
• Protective Case Included.

• Range: 2.50-3.00"/62-75mm. Resolution: 0.00005" / 0.001mm. Accuracy: 0.00020"
• Carbide measuring surfaces
• Contact points are designed to allow measurments near the bottom of a blind hole
• Setting/Calibration Ring Included
• Friction Thimble. Protective Case Included.

• [Size]: Range 2.000"-6.000" diameter, .0005" graduations, 6" depth
• [Industrial Professional High Precision Gage]: Deep cylinder bore gageing to a depth of 10" affords the user the ability to measure out-of-round conditions and tapers of cylinders without the necessity of removing pistons - critical wear area of the cylinder can be reached with this gauge.
• [Packing]: Includes all the necessary spacers, interchangeable extensions and ABS storage case
• [Features]: Dial gage contains jeweled bearings

User questions & answers

Question:	Could I measure a v8 engine cylinder bore with this ? & if so how accurate would the readings be
Answer:	The picture and the set are correct. The 1.4 and 2.0 are inserted in their respective heads and the other slot is empty because it is an SAE set. The SAE set and metric set use the same case and the metric set has one extra extension and therfore an empty slot in the SAE set. It is a good tool but the case is very cheap.
Question:	Can this meassure cam bore
Answer:	I have the higher precision electronic version which is similar and have done extensive calibration in a production environment at a major employer years ago. Most bore gauges follow this approach: For the bore range (tip that you are using) you need a "master ring gage" for that range in order to "zero" the instrument. A micrometer generally does not have the precision needed to calibrate it. (You can get by a good ballpark quick and dirty, but you are introducing some serious error). Those gages you can even buy used for about $30 or less sometimes $10 on eBay. This is because when you remove and insert different sized bit you alter the tool and it needs to be calibrated. Another (more pricey approach) is to get a "master setting tool" which allows you to insert blocks. The key is a physical reference such as a ring or block in the precision grade you want instead of another tool (a major no-no). Any precision work you want to do in the future you want to have these references as part of your tool set. Otherwise there is little point to have a precision tool and no reference.
Question:	Hi, where can I get replacement spacers? I bought this product a while back and it didn't come with all the spacers
Answer:	Not flat. They have a small curvature
Question:	Will this be able to measure the bore of a shotgun barrel
Answer:	The battery in the receiver(tag) should be alive to response as sound alarm and flashing.

Product features

Product Description

• Super Precision Deep Measuring Bore Gauge
• Accuracy: 0.0005" with Crisp Precision Graduations
• Carbide tip on measuring plunger
• Dial indicator contains jeweled bearings, ABS storage case included
• Super Precision Bore Gauge Deep cylinder bore gageing to a depth of 10" affords the user the ability to measure out-of-round conditions and tapers of cylinders without the necessity of removing pistons - critical wear area of the cylinder can be reached with this gauge. Super precision up to 0.0005" at range from 2" to 6"

Wheel Guide

Wheel guide

Anvils

Inserting anvils

Washers

Adjusting washer

Sub-anvils

10-inch adaptor can easily penetrate the inner diameter under different working conditions

Product Exploded View

Product features

3'' x 0.0001'' Ultra-Precision Outside Micrometers Carbide Tipped 3 Pcs/Set

• Range: 0 - 3'', 3 pcs/set
• Crisp, clear, easy-to-read graduation, accurate to 0.0001''
• Hardened and ground spindle with carbide anvil ensure durability and accuracy
• Complete with calibration standards and wrenches
• Ratchet handle for precise application of force
• Vernier Graduations: 0.0001''
• Includes 3 Micrometers with measuring ranges: 0 - 1'', 1 - 2'', 2 - 3''
• Seller SKU: EG00-0903

6" x 0.0001" Ultra-Precision Outside Micrometers with CARBIDE TIPS 6 Pcs/Set

• Crisp, clear, easy-to-read graduation, accurate to 0.0001'' 
• Hardened and ground spindle with carbide anvil ensure durability and accuracy 
• Complete with calibration standards and wrenches 
• Ratchet handle for precise application of force 
• Fitted wood padded case included! 
• Vernier Graduations: 0.0001'' 
• Includes 6 Micrometers with measuring ranges: 0 - 1'', 1 - 2'', 2 - 3'', 3 - 4'', 4 - 5'', and 5 - 6'
• Seller SKU: EG00-0906

1"/0-25mm x 0.00005" 2 Keys Electronic Digital Outside Micrometer

• Criterion A for ESD
• Data output
• No Response speed limit
• Credible power on reset
• Seller SKU: MD71-0001

1'' x 0.00005'' Electronic Digital Micrometer 7 Keys

• Measuring Range: 0-25 mm/0-1''
• Large Display
• Resolution: 0.001 mm or 0.00005 inches
• Absolute, floating zero, and relative measurements (you can zero out at any point)
• Location Memory (no need to re-zero with each use!)
• Hold button, Tolerance Mode, Relative and Absolute Modes, and Pre-settable Origin
• Instant inch/millimeter conversion
• Switch between metric and imperial measurements with great ease
• Seller SKU: AC21-1022

• Dial bore gage with Carbide-tipped contact points for extended wear and improved abrasion resistance
• Size 1.4 – 6" , Graduation: 0.0005 inch with tolerance marker on indicator
• Easily adjustable with bezel lock for zero setting
• Self-centering measuring heads, chrome plated handle and includes extension holder and good quality fitted case

User questions & answers

Question:	Do you take off the Guide Device wheels to measure a 2 1/2" bore? They won't allow the contact point to touch side of bore on the smaller sizes
Answer:	Fowler would not allow their products to be made badly so even though this is a budget version of their bore gauge it is made really well in China. I have used it a bit and have no complaints. If you want US made, pay the extra $$ but for occasional use this fits the bill.
Question:	I have a twin cam Harley Davision, will the acuusize gauge work, as I need to check the run out on the main shaft
Answer:	Hi Scott, they are from China with very good quality. Thanks
Question:	Do you ship to Peru
Answer:	I've used it to measure inner crank bearing diameter on a few engines in order to calculate oil clearance and never had a problem... I dont see how you could do any real damage unless you were extremely careless/rough about it.
Question:	Why does the set they sent me have no Accusize branding on it and it is just cut-outs with numbers and tape on it
Answer:	This is a mechanical dial indicator and does not use a battery! "Zero" point is easily preset by rotating the face of the indicator as with all mechanical indicators. The numbers change when measuring the bore exactly as it should because the bore size changes.

Product features

3'' x 0.0001'' Ultra-Precision Outside Micrometers Carbide Tipped 3 Pcs/Set

• Range: 0 - 3'', 3 pcs/set
• Crisp, clear, easy-to-read graduation, accurate to 0.0001''
• Hardened and ground spindle with carbide anvil ensure durability and accuracy
• Complete with calibration standards and wrenches
• Ratchet handle for precise application of force
• Vernier Graduations: 0.0001''
• Includes 3 Micrometers with measuring ranges: 0 - 1'', 1 - 2'', 2 - 3''
• Seller SKU: EG00-0903

6" x 0.0001" Ultra-Precision Outside Micrometers with CARBIDE TIPS 6 Pcs/Set

• Crisp, clear, easy-to-read graduation, accurate to 0.0001'' 
• Hardened and ground spindle with carbide anvil ensure durability and accuracy 
• Complete with calibration standards and wrenches 
• Ratchet handle for precise application of force 
• Fitted wood padded case included! 
• Vernier Graduations: 0.0001'' 
• Includes 6 Micrometers with measuring ranges: 0 - 1'', 1 - 2'', 2 - 3'', 3 - 4'', 4 - 5'', and 5 - 6'
• Seller SKU: EG00-0906

1"/0-25mm x 0.00005" 2 Keys Electronic Digital Outside Micrometer

• Criterion A for ESD
• Data output
• No Response speed limit
• Credible power on reset
• Seller SKU: MD71-0001

1'' x 0.00005'' Electronic Digital Micrometer 7 Keys

• Measuring Range: 0-25 mm/0-1''
• Large Display
• Resolution: 0.001 mm or 0.00005 inches
• Absolute, floating zero, and relative measurements (you can zero out at any point)
• Location Memory (no need to re-zero with each use!)
• Hold button, Tolerance Mode, Relative and Absolute Modes, and Pre-settable Origin
• Instant inch/millimeter conversion
• Switch between metric and imperial measurements with great ease
• Seller SKU: AC21-1022