13 best secure wireless alarms

Product description

The Secure Wireless Remote Nurse Alert Call Button System for patient and caregiver is simple to use and provides piece of mind. Ideal for use as an alert aid for elderly or disabled to quickly and easily call for help. Simply press the call button to alert the caregiver via the wireless receiver. Includes 1x Nurse Call Button, 1x Caregiver Receiver, and screwdriver to install call button batteries. (Requires 3x AAA batteries, 1x CR2032 battery)



The Secure Wireless Remote Nurse Alert System is backed by the exclusive Personal Safety Corporation one year full-replacement warranty and exceptional customer service! Don't be fooled by the imitators; Trust in a brand that has been serving concerned care facilities and individuals since 1991!



All Secure Call Button Alert systems are FCC compliant, unlike nearly all similar call button systems available.



PSC is devoted to being your Patient-Centered, Solutions-Based, Cost-Effective partner for ALL your fall management and patient safety product needs. Our vision is to listen, learn and lead the industry in developing the highest quality products at the lowest manufacturer direct prices. We pride ourselves on focusing our complete attention on exceeding the expectations of our valued customers with the industry’s most complete line of high quality fall management and patient safety products.



Our products have assisted in reducing falls in thousands of nursing homes and hospitals throughout the U.S., Canada and Europe.



PAIRING INSTRUCTIONS:



1. Press receiver “Signal” button until LED light turns on

2. Press red call button once to pair with receiver

3. Red light will flash to confirm successful pairing

4. Receiver will automatically exit pairing mode

5. System is ready to use. Repeat process if call button and receiver lose connection

• Our wireless nurse call button alert system for patient and caregiver is simple to use and provides piece of mind - Ideal for use as an alert aid for elderly or disabled to quickly and easily call for help - Simply press the call button to alert the caregiver via the wireless receiver
• System range of up to 500+ ft in open area - 32 melody/alarm sounds to choose from, adjustable volume control, and multiple receiving options to eliminate interference from other devices
• Call button can be worn as a pendant, carried on pocket, or placed at bedside - Call button is water resistant - Receiver can be wall mounted, placed near caregiver, or carried in pocket
• All Secure Call Button Alert systems are FCC compliant, unlike nearly all similar call button systems available
• Includes 1x Patient Call Button, 1x Caregiver Receiver, and screwdriver to install call button battery (requires 3x AAA batteries, 1x CR2032 battery) - Backed by the Personal Safety Corporation one year full-replacement warranty and exceptional customer service - Trust in a company that has been serving thousands of long term care facilities and hospitals since 1991

User questions & answers

Question:	Why can't I use rechargeable batteries
Answer:	You can use them. However alkaline AAA batteries measure about 1.56 volts when new. Rechargeable AAA batteries will measure around 1.2 to 1.25 volts right out of the charger. So this pager will soon recognize the rechargeable batteries as nearly dead already and the pager will stop working. This pager also has parasitic properties anyway, in that it will drain batteries while it just sits. The only way to overcome that is to always remove the batteries when not in use. The mfr. could correct this for future buyers, by incorporating a manual on-off switch for this unit.
Question:	How loud is the alarm? Would it would for people who have partial hearing loss
Answer:	The volume is adjustable in steps from very loud to very soft. I have partial hearing loss and have no problem hearing it at a medium setting. The loudest setting will wake the dead. (Or the very asleep!)
Question:	After a few months of use, button doesn't send signal, main unit will sound. Chganging batteries did not help. Anything I need to know
Answer:	Try re-pairing the transmitter and receiver using the following instructions:PAIRING INSTRUCTIONS: 1. Press receiver "Signal" button until LED light turns on 2. Press red call button once to pair with receiver (be sure to remove plastic battery protector tab by opening the call button with included screwdriver) 3. Red light will flash to confirm successful pairing 4. Receiver will automatically exit pairing mode 5. System is ready to use. Repeat process if call button and receiver lose connection
Question:	Does this system alert you to which patient is calling specifically? (Ex, does a number 3 flash up the onscreen
Answer:	No. Single unit, designed for one person

Product description

Includes 1x Nurse Call Button (receiver can pair with up to 8 call buttons. Additional Model No. WCBT-1 call buttons sold separately), 1x Caregiver Receiver, and screwdriver to install call button batteries. (Requires 3x AAA batteries, 1x CR2032 battery. Batteries not included)



Secure Wireless Slimline Pager One Call Button Nurse Alert System is backed by the exclusive Personal Safety Corporation one year full-replacement warranty and exceptional customer service! Don't be fooled by the imitators; Trust in a brand that has been serving concerned care facilities and individuals since 1991.



All Secure Call Button Alert systems are FCC compliant, unlike nearly all similar call button systems available.



PSC is devoted to being your Patient-Centered, Solutions-Based, Cost-Effective partner for ALL your fall management and patient safety product needs. Our vision is to listen, learn and lead the industry in developing the highest quality products at the lowest manufacturer direct prices. We pride ourselves on focusing our complete attention on exceeding the expectations of our valued customers with the industry’s most complete line of high quality fall management and patient safety products.



Our products have assisted in reducing falls in thousands of nursing homes and hospitals throughout the U.S., Canada, and Europe.



PAIRING INSTRUCTIONS:



1. Press receiver “Signal” button until LED light turns on

2. Press red call button once to pair with receiver

3. Red light will flash to confirm successful pairing

4. Receiver will automatically exit pairing mode

5. System is ready to use. Repeat process if call button and receiver lose connection

• CONVENIENT SLIMLINE CAREGIVER RECEIVER - The SWCB-1S call button system is simple to set up, and allows for those in need to remotely notify at-home caregivers, nurses, therapists, spa workers, etc. when assistance is needed
• MULTIPLE ALERT OPTIONS & BRIGHT ALERT LIGHT - Caregiver alert options include 1. Sound+Light 2. Sound Only 3. Light Only - Bright LED alert light is great for those with hearing impairment - 32 melody/alarm sounds to choose from, adjustable volume, and rolling receiving code eliminate signal interference
• PAIR UP TO 8 CALL BUTTONS WITH RECEIVER - Up to 8 water-resistant pendant nurse call buttons can be paired with one receiver (or multiple receivers), making it easy to set up a nurse call button in multiple areas of a home or small facility - Slimline caregiver receiver may be wall mounted, placed near caregiver, carried in pocket, etc.
• SWCB-1S SLIMLINE SET - Set includes 1x Water-Resistant Patient Call Button (Additional Model No. WCBT-1 call buttons sold separately. Search ASIN: B0753VJJRL), 1x Slimline Caregiver Receiver, and screwdriver to install battery - Requires 3x AAA and 1x CR2032 batteries (not included) - All Secure Call Button Alert systems are FCC compliant, unlike most similar call button systems available
• SYSTEM RANGE OF UP TO 500+ FT - Reliable signal reception within a home or small facility (obstacles within home may limit operational distance - Always test before use) - Backed by Personal Safety Corporation's one year full-replacement warranty and exceptional customer service - Trust in a brand that has been serving concerned care facilities and individuals throughout the U.S., Canada, and Europe since 1991

User questions & answers

Question:	Does this model swab-1s have the same range as the swcb-1? I have the swcb-1 am pleased with it but would like a smaller receiver
Answer:	yes,this is a 14.9 inch choker necklace
Question:	Where can I buy a second button
Answer:	look alike
Question:	What is the size of the receiver? Is it easy to carry in a pocket if working outside? Thank you
Answer:	There was one per package that I ordered.
Question:	Can you buy an extra call button and pair both to the same receiver? I want to have a call button at two location. Cost of 2nd call button
Answer:	It’s a necklace...

Product description

Includes 2x Patient Call Buttons, 1x Caregiver Receiver, and screwdriver to install call button batteries. (Batteries not included. Requires 3x AAA batteries, 2x CR2032 batteries)



The Secure Wireless Remote Nurse Alert System is backed by the exclusive Personal Safety Corporation one year full-replacement warranty and exceptional customer service!



Don't be fooled by the imitators; Trust in a brand that has been serving concerned care facilities and individuals since 1991! We guarantee your complete satisfaction.



All Secure Call Button Alert systems are FCC compliant, unlike nearly all similar call button systems available.



PSC is devoted to being your Patient-Centered, Solutions-Based, Cost-Effective partner for ALL your fall management and patient safety product needs. We pride ourselves on focusing our complete attention on exceeding the expectations of our valued customers with the industry’s most complete line of high quality fall management and patient safety products.



Our products have assisted in reducing falls in thousands of nursing homes and hospitals throughout the U.S., Canada & Europe.



PAIRING INSTRUCTIONS FOR CALL BUTTONS AND RECEIVER:



1. Press receiver “Signal” button until LED lights turn on

2. Press red and blue call buttons one at a time to pair with receiver (be sure to first remove plastic battery protector tabs by opening the call buttons with included screwdriver)

3. LED lights will flash to confirm successful pairing

4. Receiver will automatically exit pairing mode

5. System is ready to use. Repeat process if call button and receiver lose connection

• Simple to use two call button nurse call alert system for patient and caregiver, doctor's office, health spa, etc. - Ideal for use as an alert/alarm for elderly or disabled to quickly and easily call for help when needed, or in an emergency situation - Simply press either call button to alert the caregiver via the wireless receiver - Red call button activates emergency alarm sounds, while the blue call button activates melody nurse call sounds
• System range of 500+ feet in open area (walls and other objects may decrease operating distance) - 32 melody/alarm sounds to choose from, adjustable volume control, and three receiving options to eliminate interference from other devices
• Call buttons can be worn as a pendant, carried on pocket, or placed at bedside - Receiver can be wall mounted, placed near caregiver, or carried in pocket - Call buttons are water resistant
• All Secure nurse call systems are FCC compliant, unlike nearly all similar call button systems available - Secure by Personal Safety Corporation...The brand trusted by thousands of concerned care facilities and countless individuals since 1991
• Includes 2x Patient Call Buttons, 1x Caregiver Receiver, and screwdriver to install call button batteries (Batteries not included. Requires 3x AAA batteries, 2x CR2032 batteries) - Backed by the Personal Safety Corporation one year full-replacement warranty and exceptional customer service

User questions & answers

Question:	forgot to ask do the two call buttons work both ways, forget the nurse part, its for a couple to communicate in case of an emergency bet/ each other
Answer:	Depends on the car you are installing it in... :)
Question:	How is the battery life
Answer:	Yes It work on most cars but when you install must buying modul for 35$ me it works great I recommend it.
Question:	This only worked for 2 weeks. How do you go about using the "one year warranty" claimed in the title description
Answer:	Hi, please check: 1. whether the remote battery with enough power 2. whether the pke antenna is well mount and there is pke induction blind area 3. whethere there is something to interference with the device. please check. eddy
Question:	is this a portable device
Answer:	Thank you for your inquiry . Please note that the ec003n-k-1 is not compatible with cars with double pulse for unlock, I checked your vehicle ( 2004 infiniti g35) specification and found that your vehicle requires double pulse unlock, .In this case ,the ec003n-k-1 is not suit for your vehicle . Don't worry about that, i will recommend some other items to you, please check the below information: We select several kinds of universal types for you .Please check the links for that. EC002-v:https://www.amazon.com/dp/B011HNUUSA EC002-NS:https://www.amazon.com/dp/B00MBKVWJU Ec002-FO:https://www.amazon.com/dp/B01AXNVVQA Moreover, please pay attention to following points before you buy it: 1. Read the item product description about features of it carefully to see if which just the one you are looking for 2. As there is a chip immobilizer in your car OEM key fob, you need to have an extra key & also need to buy an extra bypass module in order to make the kits working well. Here is the bypass module you may take a consideration:https://www.amazon.com/dp/B07NSLPBG7 or https://www.amazon.com/dp/B00MEHBVIC and you can buy it with the alarm together if you need. 3. Due to complexity of installation of this item, no matter which one you plan to buy, they are required to be installed by a professional car alarm installer or trained alarm installer if you have no alarm installation experience, please check if you can find one or not before purchasing. And you can find an alarm installer in your local town or search “car alarm installation” on amazon.com to find the installer nearby. If you like, we can send the user manual and wire diagram to you for study so that you can check with your alarm installer. If so, please tell us your email or send an email to us (there is this info in our storefront page)so that we can send them to you. If you have any problem, please feel free to contact me. Have a good day. Lanny Zhuang

Product description

The GE Personal Security Deluxe Door Alarm provides a simple-to-use, cost-effective security solution to protect you and your family against home invasions thanks to the 120-decibel alarm, loud enough to make a would-be intruder think twice about entering through your door. The system is also extremely easy to use. The deluxe door alarm features a contemporary design with easy access buttons and controls for simple operation. This straightforward concept makes using the GE Personal Security Deluxe Door Alarm intuitive, no matter what your technological skills may be. Perfect for homes, apartments, dorm rooms and offices. The GE Personal Security Deluxe Door Alarm couldn't be any easier to install. No measuring or messing with templates. Simply mount the deluxe door alarm using the provided versatile mounting plate that accommodates temporary or permanent mounting (screws and double-sided tape included). The deluxe door alarm features a four-digit keypad for programming your custom pin, to secure any door in your home. Using the deluxe door alarm is a breeze. You can select instant or delayed alarms with the flip of an easy-access switch. In the 'away' mode, you have 45 seconds to exit your home after you arm the system. When you get back home, simply open the door and deactivate the alarm within 30 seconds by entering your custom four-digit code. The 30-second delay helps to eliminate false triggering of the alarm. When you're home, simply select 'Home' mode for an instant alarm. With a 120-decibel siren, the GE Personal Security Deluxe Door Alarm is loud enough to alert you or your neighbors of a possible break-in. The siren is sure to scare any intruder, and will give you plenty of warning to alert the authorities and get your family to safety. When not in 'alarm' mode, all the alarms in the Alarm Kit offer a chime setting that alerts each time a door is opened. This is a great safety feature if you have small children that may make their way outside unsupervised. Next, check that the batteries are fresh using the battery test switch or low battery indicator. It's that easy! There's no wiring involved, so the kit is simple for anyone to install. Perfect for homes, apartments, dorm rooms and offices.

From the Manufacturer

The GE Personal Security Deluxe Door Alarm provides a simple-to-use, cost-effective security solution to protect you and your family against home invasions thanks to the 120-decibel alarm, loud enough to make a would-be intruder think twice about entering through your door. The system is also extremely easy to use. The deluxe door alarm features a contemporary design with easy access buttons and controls for simple operation. This straightforward concept makes using the GE Personal Security Deluxe Door Alarm intuitive, no matter what your technological skills may be. Perfect for homes, apartments, dorm rooms and offices.

• Deluxe door alarm perfect for homes, apartments, dorm rooms and offices. 120 decibel alarm is loud enough to make a would be intruder think twice about entering through your door and alert your neighbors of a possible break-in.
• Easy to use four-digit keypad for programming your custom pin - easy access buttons and controls for simple operation.
• Easy to install, simply mount using the provided mounting plate for temporary or permanent installation (double-sided tape and screws provided).
• Features "Away" and Home" modes - both chime and alarm modes for when you are home or away as well as instant or delayed alarm.
• Battery powered so there is no need for wiring - requires 3 AAA batteries (not included).

User questions & answers

Question:	Does the keypad make noise when you press the buttons? Would someone be able to hear that I am pressing an alarm pad
Answer:	It is not recommended.
Question:	why can't a thief just break the alarm
Answer:	Yes, I have regular ceiling sockets and I have been using the for years
Question:	help what kind of batteries does this take
Answer:	3.74" is the size it probably says 4" for the size of can it fits.
Question:	Can you able it when you leave and nobody's home and come home and it not go off even though its inside? or will it go off until i disarm it
Answer:	The black plastic mounting piece on the bottom either twists to right or left and then U will B able 2 remove it, revealing battery compartment. Also @ first I didn't think mine turned 360 degrees but if U hold with fake glass down and turn fake glass itself, it will turn 360 degrees

Product features

GE Deluxe Wireless Door Alarm, 45117

The GE Personal Security Deluxe Door Alarm provides a simple-to-use, cost-effective security solution to protect you and your family against home invasions. Perfect for homes, apartments, dorm rooms and offices, the alarm has a built-in 120-decibel siren, loud enough to make a would-be intruder think twice about entering through your doors. The door alarm features an away mode which offers a 45-second exit delay and a 30-second entry. When the alarm is in Home mode the alarm will sound instantly when the door is opened. Also included is a 4-digit keypad, which activates and deactivates the alarm with a 4-digit code of your choosing. With no wires required for installation, protecting any door in your home is easy - simply attach the alarm to your door with double-sided tape (included) or screws (included). Each door alarm features a low battery indicator light and requires 3 AAA batteries (not included).

Product description

Just place the waterproof Driveway Patrol transmitter outside and put the receiver inside. It installs in seconds and no tools or wires are needed. When someone approaches, it sends a signal to alert you over a 400 foot range. This wireless driveway alarm system employs advanced infrared motion detection technology. Use it to detect visitors, vehicles, intruders or kids coming and going. Use it anywhere in your home to monitor the mailbox, front door, garage or driveway. You'll never be surprised again!

• Detects people or vehicles
• Durable weather resistant plastic construction
• 400 foot transmission distance between transmitter and receiver
• Receiver makes a pleasant chiming sound when sensor is crossed
• Receiver uses 3 C-sized batteries and transmitter uses one 9V battery (not included)

User questions & answers

Question:	How do you gat the battery door panel of the receiver? It is not a slotted screw or a phillips head screw. It is a square shaped screw head
Answer:	Yes
Question:	Can this be used in an indoor setting
Answer:	Yes, it fit a 7 mm rotor. Thanks.
Question:	Does it come with a wall outlet adapter
Answer:	This should work for your vehicle without the need for a bypass module
Question:	whats is typical battery life
Answer:	I'm sure it depends on what vehicle you use and what bypass module you need, but I put it on a 2004 Chrysler Pacifica and the original fob still works.

Product description

A burglary occurs every 14. 5 seconds in the United States - and the average 911 response time has climbed to 10 minutes due to federal budget cuts. Help secure your home at each entry point. Should an intruder attempt to enter, a loud, siren will sound immediately. The noise from the sensor helps deter entry, while also alerting you and others to the intrusion. These alarms are battery powered, and thus easy to mount anywhere you would like to deploy them. Small and white, they work seamlessly with all home decor styles.

• MAXIMUM SECURITY : Fortify your property with this motion sensing alarm. 115 dB alarm alerts you when motion is detected outside your home. Warns you of approaching people and vehicles.
• SECURES LARGE AREAS : Long-range sensors can be placed up to 390 feet (120M) from the receiver (obstructions may reduce the receiving range)
• EASY INSTALLATION : No wiring needed, battery-operated, installs in minutes. Sensor requires 3 X AAA Batteries (Not included). Receiver requires 3 x C Batteries (Not Included).
• GREAT DETECTION AT A DISTANCE : Detects human or heated-object movement from 20 Feet (6M) away and scans 110 Degrees
• ATTRACTIVE & CONSUMER-PREFERRED: Aesthetically pleasing, premium white alarms ideal for the home setting

User questions & answers

Question:	How does DC 5v work
Answer:	There are several choices to pick from NO & NC. Pick the right one for you in the drop down box. Unfortunately the comments are for all different switches this seller has so most people don’t even realize it. These comments are for multiple switch styles, colors, and amounts.

Product description

Includes 2x Nurse Call Button (receiver can pair with up to 8 call buttons. Additional Model No. WCBT-1 call buttons sold separately), 2x Caregiver Receiver, and screwdriver to install call button batteries. (Requires 6x AAA batteries, 2x CR2032 battery. Batteries not included)



Secure Wireless Slimline Pager One Call Button Nurse Alert System is backed by the exclusive Personal Safety Corporation one year full-replacement warranty and exceptional customer service! Don't be fooled by the imitators; Trust in a brand that has been serving concerned care facilities and individuals since 1991.



All Secure Call Button Alert systems are FCC compliant, unlike nearly all similar call button systems available.



PSC is devoted to being your Patient-Centered, Solutions-Based, Cost-Effective partner for ALL your fall management and patient safety product needs. Our vision is to listen, learn and lead the industry in developing the highest quality products at the lowest manufacturer direct prices. We pride ourselves on focusing our complete attention on exceeding the expectations of our valued customers with the industry’s most complete line of high quality fall management and patient safety products.



Our products have assisted in reducing falls in thousands of nursing homes and hospitals throughout the U.S., Canada and Europe.



PAIRING INSTRUCTIONS:



1. Press receiver “Signal” button until LED light turns on

2. Press red call button once to pair with receiver (be sure to remove plastic battery protector tab by opening the call button with included screwdriver)

3. Red light will flash to confirm successful pairing

4. Receiver will automatically exit pairing mode

5. System is ready to use. Repeat process if call button and receiver lose connection

• INCLUDES 2-PACK OF SLIMLINE CAREGIVER RECEIVERS & CALL BUTTONS - The SWCB-1S call button system is simple to set up, and allows for those in need to remotely notify at-home caregivers, nurses, therapists, spa workers, etc. when assistance is needed
• MULTIPLE ALERT OPTIONS & BRIGHT ALERT LIGHT - Alert options include 1. Sound+Light 2. Sound Only 3. Light Only - Bright LED alert light is great for those with hearing impairment - 32 melody/alarm sounds to choose from, adjustable volume, and rolling receiving code eliminate signal interference
• PAIR UP TO 8 CALL BUTTONS WITH EACH RECEIVER - Up to 8 water-resistant pendant nurse call buttons can be paired with one receiver (or multiple receivers), making it easy to set up a nurse call button in multiple areas of a home or small facility - Slimline caregiver receiver may be wall mounted, placed near caregiver, carried in pocket, etc.
• SWCB-1S SLIMLINE SET - Set includes 2x Water-Resistant Patient Call Buttons (Additional Model No. WCBT-1 call buttons sold separately. Search ASIN: B0753VJJRL), 2x Slimline Wireless Caregiver Receiver, and screwdriver to install battery - Requires 6x AAA and 2x CR2032 batteries (not included) - All Secure wireless call button systems are FCC compliant, unlike similar call button systems available
• SYSTEM RANGE OF UP TO 500+ FT - Reliable signal reception within a home or small facility (obstacles within home may limit operational distance - Always test before use) - Backed by Personal Safety Corporation's one year full-replacement warranty and exceptional customer service - Trust in a brand that has been serving concerned care facilities and individuals since 1991

User questions & answers

Question:	Can receivers be paged separately from each other
Answer:	I believe it is portable. We moved it to different locations.
Question:	Can rechargeable batteries be used
Answer:	No, it is not suitable.
Question:	Can rechargeable batteries be used
Answer:	The way it is normally used is to mount the magnetic piece in the door and the sensor piece in the door frame. So there should not be very much vibration at all. A hall effect device might be a bit sensitive to impulse but a reed switch is just a switch that is controlled by a magnet. Very simple. If you put the switch on the mocing part you might have a problem. Don't use these that way. You might need a different technology solution if vibration is present on both sides but if I recall correctly the switch does not chage states if the magnet is within one inch of the switch and the parts are normally mounted dkrectly across from each other. Ao when the door opens more than an inch the switch changes states.
Question:	How long do the batteries last on these
Answer:	Yes they will as long as the input device is capable to function well on 3 vdc. You may need a pull down resister if the cable is long.

Product description

Know when there’s movement in your home.

Requires an ADT Security Hub (sold separately). Will not pair with the SmartThings Hub product. ADT professional monitoring services are optional and require an additional fee. The ADT Water Leak Detector will be unable to communicate with the ADT Security Hub during a power or internet outage. One-year limited warranty. Visit SmartThings.com/ADT for specifications, support, and more.

• Know when there’s movement in your home
• Set lights and other connected devices to turn on and off as people come and go
• Initiate optional ADT professional monitoring services when an intrusion is detected in your home
• Requires an SmartThings ADT Security Starter Kit (F ADT STR KT 1). Will not pair with SmartThings Hub nor any other ADT panels
• Adt professional monitoring services available for less than dollar 1 a day with no long term contracts

User questions & answers

Question:	In order to use this do i have to have an adt subscription? or does it work with smartthings just like any other zigbee or zwave motion sensor
Answer:	We have had ours since 2016. We had to change the battery in June of 2018. We really like this product.
Question:	After paired and recognized on the app and on the hub, the only message received on the app is that it is inactive. how can i activate it
Answer:	You may want to consider an inexpensive 2 way radio (walkie-talkie). Amazon has one for under $30.00. Look at the Motorola MG167A unit. Motorola makes a very reliable product. This will definitely give 2 people a way to communicate with each other. There are no monthly fees or services required with this option.
Question:	can i buy this and hook it up to the pulse app? i have adt
Answer:	The batteries in the Caregiver Personal Pager lasted just over 2 months. I dont think 2 months was bad at all. After all the playing with the tones and settings, I would now expect a couple more months out of the battery life. The batteries in the Patient call buttons are still the original and are still going strong after 3 months.
Question:	Will my dog trigger the motion sensor? Approx: 55lb dog
Answer:	Please first check that the batteries are functional, then use the below instructions to re-pair the call buttons with the receiver. If the issue is not resolved, simply contact us at 800-373-2873 to process a replacement.PAIRING INSTRUCTIONS FOR CALL BUTTONS AND RECEIVER:1. Press receiver "Signal" button until LED lights turn on2. Press red and blue call buttons one at a time to pair with receiver (be sure to first remove plastic battery protector tabs by opening the call buttons with included screwdriver)3. LED lights will flash to confirm successful pairing4. Receiver will automatically exit pairing mode5. System is ready to use. Repeat process if call button and receiver lose connection.

Product features

Help protect your family with a fast-response ADT home security system.

Your home security system needs a brain, so get started with an ADT Security Hub. It features a 7-inch touchscreen control panel, a built-in siren, battery and cellular data backup, and dual-encryption wireless technology.

Help secure your home with a range of easy-to-install detectors and alarms.

Add ADT detectors and alarms to help protect your home from intrusion, fire, floods, and more. Choose from a range of devices which can be installed in minutes.

Enjoy 24/7 peace of mind with optional ADT professional monitoring services.

Help protect your home and family 24/7 with optional ADT professional monitoring services. Choose from a range of intrusion detection and life safety services with low month-to-month rates and no long-term contracts.

Automate your home with SmartThings and a wide range of compatible devices.

Turn your home into a smart home with your ADT Security Hub. Choose from a wide range of Works with SmartThings devices, including lights, cameras, doorbells, door locks, thermostats, sensors, and more.

ADT Security Hub

The brain of your home security system. Features a 7-inch touchscreen control panel, a built-in siren, battery and cellular data backup, and dual-encryption wireless technology. Requires a Wi-Fi internet connection, plus free SmartThings app.

SmartThings App

Arm and disarm your ADT home security system from your smartphone. Monitor, control, and automate connected devices in your home. Receive alerts when there's unexpected activity.

ADT Door and Window Detector

Initiate optional ADT professional monitoring services when an intrusion is detected in your home. Receive alerts if doors or windows are opened unexpectedly. Set lights and other connected devices to turn on and off as people come and go. Requires ADT security Hub. Sold Separately.

ADT Motion Detector

Initiate optional ADT professional monitoring services when an intrusion is detected in your home. Receive alerts if there's unexpected movement. Set lights and other connected devices to turn on and off as people come and go. Requires ADT security Hub. Sold Separately.

ADT Smoke Alarm

Initiate optional ADT professional monitoring services, receive alerts, or set lights and other connected devices to turn on and off when extreme temperatures or smoke are detected in your home. Requires ADT security Hub. Sold Separately.

ADT Carbon Monoxide Alarm

Initiate optional ADT professional monitoring services, receive alerts, or set lights and other connected devices to turn on and off when carbon monoxide is detected in your home. Requires ADT security Hub. Sold Separately.

ADT Water Leak Detector

Initiate optional ADT professional monitoring services, receive alerts, or set lights and other connected devices to turn on and off when a water leak is detected in your home. Requires ADT security Hub. Sold Separately.

ADT Keychain Remote

Arm and disarm your ADT home security system at the press of a button. Initiate panic alarm to optional ADT professional monitoring services. Requires ADT security Hub. Sold Separately.

Product description

Set Includes: SUA-1 Alarm Monitor w/1-year warranty, 12 in x 12 in Chair Pad w/45-Day Warranty, AMH-1 Alarm Holder, 2x AAA Batteries - SUA-1 alarm easily converts from a pad monitoring alarm to a personal pull cord/clip alarm using the optional 2 ft. or 4 ft. pin, cord and clip set (search ASIN: B00A8LICH4 or B00A9YC9N8).

• The Secure 45CSET-1 Chair Exit Alarm Set for fall and wandering prevention alerts caregivers when a fall risk patient attempts to exit a chair - Alarm sounds when weight is removed from sensor pad - Simply hold the reset button for three seconds to silence alarm and return to standby mode - Alarm automatically resets when patient returns to a seated position on the sensor pad
• Set includes everything needed for immediate use - SUA-1 alarm monitor is tamper-resistant and includes Velcro holder - Chair sensor pad is incontinent-proof, latex-free, and foldable for easy storage
• Sensor pad is features and ultra thin design that is comfortable for the patient and durable for everyday use - Sensor pad is suitable for all patients with no weight minimum or maximum
• Sensor pad features metal connecting pin that will not break (compare to competitive alarms that use easily breakable plastic connectors)
• Includes SUA-1 80 dB alarm monitor w/auto reset (1 year warranty), 12" x 12" chair sensor pad (45 day warranty), AMH-1 Alarm Holder with Velcro Strap and 2x AAA Batteries -Trust in a brand used by thousands of concerned care facilities throughout the US, Canada, and Europe since 1991

User questions & answers

Question:	Are you able to order a replacement pad
Answer:	No, it is a soft case.
Question:	I purchased the secure 45cset-1 chair exit alarm set.. now the alarm will not stop beeping cannot turn off alarm, what is the cause of this
Answer:	China
Question:	How loud is the alarm? I would be concerned about startling my mother if she tried to stand up
Answer:	It will stick out of the top. All of my husbands poles stick out of the top by a foot . But it still makes carrying them easier
Question:	How far can the monitor be removed from the pad? Can it be put in another room nearby
Answer:	It should fit 2 - 2 piece rods that are That long.

Product description

The GE Personal Security Window/Door Alarm provides a simple-to-use, cost-effective security solution to protect you and your family against home invasions thanks to the 120-decibel alarms, loud enough to make a would-be intruder think twice about entering through your doors or windows. The alarm is also extremely easy to use. The window/door alarms feature a contemporary design with easy access buttons and controls for simple operation. This straightforward concept makes using the GE Personal Security Window/Door Alarm intuitive, no matter what your technological skills. With no wires required for installation, protecting any window/door in your home is as easy as attaching the alarm to your window/door with double-sided tape (included). For indoor use only. This product is backed by 90-day limited warranty.

• Includes 4 window/door alarms, each with 3 adjustable settings off/chime/alarm
• Loud 120 decibel alarm sounds when door or window opens, helps deter intruder and alert residence
• Easy and convenient to install, requires no wiring, mounting hardware and instructions Included, designed for indoor use only
• Built in low battery test button to easily check battery life, Includes four LR44 batteries for each alarm
• Comes with a 90 day limited warranty; Perfect for home, garage, apartment, dorm room, mobile home, RV, office and more

User questions & answers

Question:	Can you mount them with double sided tape instead of screws
Answer:	/Duration 0:11Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:11 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Yes.. it actually comes with double sided mounting tape.
Question:	Can I set them to be quiet if I open the windows during the daytime hours then set the alarm when I close the downstairs windows at night
Answer:	Good question and yes the function switch on the side can go be switched on and off for the window versions and the door versions with the key pad can be set from home/ away to alarm/chime options. The vibration alarm for doors such as sliding glass doors has an on/off switch as well.
Question:	Does anyone have anymore information on the legal disclaimer on this item? Like what in it is known to cause cancer and how you would be exposed to it
Answer:	This item is powered by a small LR44 battery, the battery is the reason for such disclaimers.
Question:	I like to sleep with my windows opened about 3-4 inches. Is it possible to set the magnets to be in the proper position (to each to set off the alarm
Answer:	Drill holes directly above window on both sides and insert cut nails or hardened screws. Then window can only open to that distance. Take out nails to open fully

Product features

GE Personal Security Window/Door, 45174, DIY Protection, Burglar Alert, 4-Pack

The simple security system you will use! GE Magnetic Indoor Window Alarms let you know any time a door or window in your house is opened. These easy to install alarms require no wiring and has 4 LR44 batteries included so they can be used right away. Simply stick these to any window that opens and feel secure knowing that your home will alert you when needed.

Product description

The Secure 45BSET-1 Bed Exit Alarm Set (US Patent No. 6,847,301) effectively alerts caregivers when a fall risk patient attempts to exit the bed. Alarm monitor automatically resets when patient returns to sensor pad, or it can be reset using the three-push reset button. Secure Universal Alarm Features: 80 dB, Tamper-Resistant, Break-Resistant ABS Plastic, Auto-Reset Feature, Always-On Feature, Alert Light, 2 AAA Batteries Included, Low Battery Indicator, Battery Tester, Three Push Reset, One Year Warranty

• The Secure 45BSET-1 Bed Exit Alarm Set (US Patent No. 6,847,301) alerts caregiver when a fall risk patient attempts to exit the bed - Alarm monitor automatically resets when patient returns to sensor pad, or it can be reset using the reset button
• Comfortable ultra-thin 12" x 30" bed sensor pad is Latex-free, can be folded for storage, and has no weight min/max restrictions
• Sensor pad features metal connecting pin that will not break (compare to competitive alarms that use weak plastic connectors) - Can be used on all mattresses
• OSHA approved 80 dB tamper-resistant SUA-1 patient monitor is covered by our one year full-replacement warranty - Incontinent proof, latex-free bed sensor pad is covered by a 45 day warranty
• Set includes SUA-1 Alarm Monitor, 12"x30" Bed Sensor Pad, Alarm Holder w/Velcro Strap and 2x AAA Batteries - Trust in the brand that has served thousands of concerned care facilities throughout the US, Canada, and Europe since 1991

User questions & answers

Question:	Is there any way to extend the cord going to the alarm? Is there a possible extender cord
Answer:	No doesn't look like it to me. My dogs got so distressed with the pitch of the alarm that I had to find another option.
Question:	sorry, poor English. Is monitor a remote that can carry to through house and not be by bed
Answer:	No. Monitor is connected to a pressure sensitive pad by means of a wired connection. I don't recall the length of the wire. Not over 6 feet to be sure. Pad can be placed on a bed or chair. When activated, an audible alarm sounds when there is no pressure on the pad. So, when a person gets up from bed or chair an alarm would sound. The alarm unit must be connected and in proximity to the pad. I tried this for use with my father. As he got older he suffered from a couple of calls resulting in minor injury. I bought the unit to alert when he was up and moving around. And it worked for a while. My father soon learned how to disconnect the monitor because he did not like someone coming everytime he got up. Alternatively, there are better but more expensive systems that are camera based and remote but do require some expertise to properly install. Hope this is helpful.
Question:	The alarm doesn't always sound when my mother get's up. Is there a trick to it or do I need to make a return
Answer:	If your mother's full body weight is removed from the sensor pad and the alarm is not sounding, there could be an issue with either the sensor pad or the alarm monitor. First make the sure the batteries are functioning by pressing the test/reset button on the side of the alarm monitor, and confirm that the alarm sounds briefly. If the alarm does not sound after testing please replace the batteries and check the system again. If you still have issues please contact us at 800-373-2873 to handle. Thank you for your business. -Personal Safety Corp.
Question:	how long does the pad last 45? 90? a year
Answer:	I purchased this about a year ago and it's still working fine.

Product description

Of the 126 million homes in America, only 20% have home security. At SimpliSafe, we're changing that. Our goal is simple: to make homes safe for everyone, and not with false security, but with real protection. Our frustration-free DIY home surveillance system bundles have precise sensors to know the difference between a family pet and an unwanted intruder, and are designed with long range sensors for entire home protection. SimpliSafe is for homes of all sizes and is built with unprecedented safeguards to keep your home protected against power outages, downed Wi-Fi, cut landlines, and physical attacks from hammers, bats, and more. This easy-to-use wireless system is full of surveillance products small enough to disappear into your home and provide blanket protection. Breathe easy with proper protection at a safe and reasonable price. The 12-piece wireless Security bundle provides 24/7 security with a smash safe keypad that is soft to touch, easy to use during the day and night, and requires no plug (meaning you can place it anywhere), and will alert the police in case of attack. The base station is like your personal security guard: It sends alarm signals to the monitoring center with a built-in cellular connection, 24-hour battery backup, and a 95dB siren. Each entry sensor (5 total) protects your doors and windows and is designed to disappear and blend into the background. The 2 motion sensors are designed for human detection, no pet detection. The key fob lets you arm and disarm your system with The press of a button – A fantastic addition for anyone who might forget their pin code. The extra 105dB siren can be placed inside or outside the house to scare off burglars and alert neighbors to a break-in. The simplicity gives you flawless HD video and audio streaming as well as a 120° field of vision day and night. Enjoy effective, contract-free 24/7 professional monitoring, and make sure your home is the safest place on earth.

• Ready to protect right out of the box. Just plug in the base station, place your sensors, plug in your Simplicam and start protecting your home in minutes - no tools required.
• Optional 24/7 professional monitoring and cloud recording with police, fire & medical dispatch starting at 50c/day - No contracts (SimpliSafe products and professional monitoring services are only offered for sale and supported in the US)
• Sound the alarm. Pioneering signal burst technology that is powerful enough to cover homes of every size, with up to 1000 ft. range -- no extender needed.
• The SimpliCam security camera lets you see what’s happening at home anytime from your phone, tablet or computer and comes with a built-in stainless steel shutter for complete control over privacy.
• Motion sensors detect motion within 30 feet, has a 90 degree field of vision and gets along great with pets under 50lbs. Perfect for full range coverage when placed in a corner.
• Backups for your backups. 24 hour battery and dual WiFI & cellular connections to keep your home secure and protected from the unexpected.
• We've got you covered - customize your SimpliSafe security system with additional sensors for whole home protection - up to 100!

Product features

Home Security. Done Right

We want to help you protect it—the right way. We have two core principles:

Use technology to make you safer

We designed SimpliSafe from the ground up. Removing complexity. Making setup a breeze. It’s an intelligent, effective home security system that is prepared for everything.

No contracts.

We believe that prices should be fair and honest, and your trust should be earned not demanded. So we got rid of middlemen and long-term contracts. No nickel and diming. No hidden fees. We don’t get paid unless you are happy. That’s exactly the way it should be.

SmashSafe

An intruder can take out the Keypad. We will still alert the police. Sorry, bad guys.

Twice Secured

We doubled down. Took our built-in cellular connection. Put it on the strongest networks. Then reinforced it with Wi-Fi. So your home is always secure.

Disaster Ready

We’ve got 6 monitoring centers. They all protect your home. All the time. Overkill? It’s not. It means there’s no single point of failure. So a disaster can’t take down your protection.

Power Outage Protection

The power fails. We don’t. In a blackout, a back-up battery kicks in and protects you for a full 24 hours.

Less Markup. More Protection. No Contracts

A common misconception: the more you pay, the more you get. But the truth is you’re paying for more markup. Not more security.You shouldn't have to pay more so we can do less. We cut out the middlemen, so you get award-winning protection at fair and honest prices, with no contracts.

No contracts, period

No contracts means we don't get paid unless you're happy. It's just common sense.

Base Station

Like your personal security guard. The Base Station sends alarm signals to the monitoring center. It’s got a built-in cellular connection, 24 hour battery backup, plus a 95dB siren.

Keypad

It’s got a big, bright display and backlit keys so it’s easy to use at night. No plug needed—place it anywhere you want.

Entry Sensor

Protects your windows and doors — works with any kind of either. They’re designed to disappear, so you can blanket your home with protection and never notice.

Motion Sensor

Covers a whole room with protection. Designed to detect intruders, not pets.

A night watch for your home. A day watch too

Every home at some point faces danger. Our job is to snuff it out. Our 24/7 alarm monitoring is always there. Ready to alert police when your home needs help. They named us Central Station of the Year. We’re proud of that. Professional monitoring starts at 14.99(USD)/month. No contracts.

Criminals. Captured.

Law enforcement loves video verification. It means the alarm is a) the real deal and b) in progress. And that means they are way more likely to catch the criminal. The result? They get there as fast as possible. We offer it. Others don’t.Add a SimpliCam to any SimpliSafe system. Setup is quick, and the crystal clear video can be viewed within the SimpliSafe app anywhere in the world.

Product description

(U.S. Patent No. 6,847,301) Set Includes: SUA-1Y 80 dB Tamper Resistant Alarm Monitor, 12" x 30" Bed Sensor Pad, AMH-1Y Alarm Holder, 2X AAA Batteries. Sensor pad is comfortable and durable for continuous use, and can be folded without damage for storage - Sensor pad features durable metal connecting pin that will not break like the easily breakable plastic connectors found on all other sensor pads.

• The Secure Bed Exit Alarm Set (U.S. Patent No. 6,847,301) protects bedridden fall-risk patients by alerting caregivers when an attempt is made to exit the bed - SUA-1Y alarm monitor sounds when patient leaves the sensor pad, and will automatically reset/silence when patient returns to the sensor pad - Alarm can also be silenced with the three-second-hold reset button
• 12" x 30" ultra-thin bed sensor pad features incontinent-proof, latex-free cover material - Sensor pad is comfortable and durable for continuous use, and can be folded without damage for storage - Sensor pad features durable metal connecting pin that will not break like the easily breakable plastic connectors found on all other sensor pads
• SUA-1Y Universal Alarm Monitor features flashing alert light, 80 dB volume level, low battery indicator, and 3-push alarm reset - SUA-1Y is tamper resistant and always on for patient safety (no unsafe on/off switch that would enable patient to disable alarm) 2X AAA batteries included in set - SUA-1 alarm monitor is the only alarm monitor that can be converted to a personal pull-pin style alarm with our optional 2' or 4' cord/clip set (Search ASIN: B00A9YC9N8 & ASIN: B00A8LICH4)
• Set includes everything needed for immediate use: SUA-1Y Alarm Monitor w/1-year warranty, 12" x 30" Bed Sensor Pad w/14-day warranty, AMH-1Y Alarm Holder w/Velcro strap, and 2X AAA Batteries
• Alarm monitor works with all Secure bed sensor pads, chair sensor pads, alarming seat belt, and toilet seat sensor pad - Secure by Personal Safety Corporation… The brand trusted by thousands of concerned care facilities throughout the US, Canada, and Europe since 1991

User questions & answers

Question:	Will this work for a 15,000 pound aircraft or does it have a max weight
Answer:	The sensors are on a thin plastic film- An aircraft is too heavy
Question:	do you have to change the battery every 14 days
Answer:	I delivered the kit to my mother's rest home and they used it for several months. She doesn't try to get out of bed on her own anymore so they discontinued using it. I'm not sure how often they should change the batteries but I'm sure they used the unit for several months and did not change the batteries at all.
Question:	the patients in only about 100 pounds, will it sense her when she gets up
Answer:	Yes, definitely. It worked when my 45 pound six year old tried it out for us.
Question:	Does this item have an adapter to plug directly into an electrical outlet
Answer:	It's been 2 years since we used this, but I believe that it runs on batteries. The cord is to attach the pad to the alarm box, which I always put at the foot of the bed away from the pad. It worked best for us to be under the fitted sheet or under a waterproof pad in his chair. We have a large house, and we could hear the alarm from any room. It was very helpful in keeping my father-in-law safe.