13 best industrial drive v belts

Product description

Accu-Link. Detachable tab type link belting. Make endless with a simple twist, no tools required. Polyester fabric is impregnated with a premium polyurethane compound. Jason's exclusive manufacturing process makes Accu-Link the most precise belt of its type, for optimum sidewall fit with the pulley. Accu-Link is available in 25 ft & 100 ft cartons. 3L and A-Link also available in 5 ft sleeved length. B-Link also available in 6 ft sleeved length.

• Polyester fabric is impregnated with a premium polyurethane compound
• Detachable tab type link belting
• Accu-Link is available in 25 ft & 100 ft cartons
• V-belt The ideal rescue belt or permanent substitute for conventional rubber V-Belts on difficult to align drives

User questions & answers

Question:	Im lookkng for a motor belt for a 20 inch scroll saw model no
Answer:	This belt is great for saws. It can be adjusted to the length you need. It is 1/2" wide. Most buyers have a decrease in the vibration.
Question:	What is the length supplied
Answer:	This listing is for an A-LINK-5 , its a 5 foot section.
Question:	Is this type of belt directional or will it work on a device with a reversible motor
Answer:	Yes, this will work with a reversible motor. The tabs face inward to create the Vee and will replace any Classical A series or FHP 4L belt with a 1/2" top width up to 60 inches in length.
Question:	The description for the A /4L says the color is black? pic shows green.. which is it
Answer:	When I bought it 2 years ago it was green. They are great for emergency belts and something that eats belts. We changed from standard v-belt to these on a building exhaust with 6 belts that we had to replace every 6 months. They lasted 2 years. You do have to go back after a week or so and adjust it then it's good to go.

Product description

You no longer have to accept the lower energy efficiency associated with envelope belts on fractional horsepower lightduty drives. Advanced V-belt technology has resulted in the development of a cut-edge, molded cog construction which exceeds conventional envelope belts in every performance category except oil resistance. This has been confirmed in extensive testing which proves that Continental ContiTech FHP V-belts run smoother and quieter, last longer, and substantially improve energy efficiency compared to noncogged belts. The cogged design of Continental ContiTech FHP V-belts (standard on 4L and 5L sizes) provides a greater surface area for heat dissipation and allows increased air flow around the belt during operation. These factors help to reduce internal belt temperatures and greatly improve belt life. The cogged design also improves flexibility, an especially important consideration where minimum or substandard sheave diameters are involved. Low cross section vibration in rubber-edged, cogged belts reduces noise generation. This allows you to take advantage of the longer life and high efficiency of FHP V-belts in noise-sensitive equipment. But even in typical factory settings, Continental ContiTech FHP V-belts contribute to a quieter operating environment. The historic inefficiency of FHP drives can be traced directly to the inability of a relatively large envelope belt to transmit a low-power force efficiently. Transmission loss is especially significant in factories using large numbers of drives and where small diameter sheaves are involved. The aggregate loss can be significant enough to have an adverse effect on equipment performance. Continental ContiTech FHP V-belts efficiency begins at 93% when used with smaller sheaves and increases dramatically as the sheave diameter increases. Since more of the rated power of the drive is delivered, actual performance nearly matches design performance. In addition, the efficiency of Continental ContiTech FHP V-belts offers you the opportunity to achieve full operating power requirements with a lower horsepower drive, reduced energy requirements, or both. These considerations can provide highly desirable economic advantages whether you're a drive manufacturer or a drive user.

• Universal classical profile
• Engineered rubber cushion and insulation
• Cut-edge, molded cogged construction
• Heat, ozone, and abrasion resistant

Product description

The belts exceed USA RMA published ratings levels. They are designed to perform at the identical or higher level than all other major USA Manufacturer's belts of the same Type.

Product description

Descriptions:

The outside fabric wrap is treated with highly oil and heat resistant.

Specially engineered, twisted, heat and chemically set, rubber material.

The body rubber compound is a highly engineered synthetic rubber compound.



Specifications:

Product Name: Drive V-Belt

Material: Rubber

Color: Black



Package Content:

1 x Drive V-Belt

• The outside fabric wrap is treated with highly oil and heat resistant.
• Outside Girth: 35"; Type: BX35,Package Content: 1 x Transmission Drive V-Belt.
• Product Name: Triangular belt ; Color : Black;Material: Rubber.
• The body rubber compound is a highly engineered synthetic rubber compound.
• Specially engineered, twisted, heat and chemically set, neoprene rubber material.

Product description

The belts exceed USA RMA published ratings levels. They are designed to perform at the identical or higher level than all other major USA Manufacturer's belts of the same Type.

Product description

Eliminates slippage to Stop belt Squeal. Maximizes power transfer for better fan, power steering, alternator, and drive motor efficiency. Extends belt life by allowing reduced operating tension. Compatible with most flat, round and V-belts/Trapezoidal rubber belts. Waterproof and weather-proof to work in All conditions.

• Eliminates belt slippage
• Stops annoying belt squeal
• Allows for reduced operating tension
• Maximizes belt and pulley life
• Compatible with most flat, round, and V/Trapezoidal rubber belts

User questions & answers

Question:	What are the ingredients in the product
Answer:	I don't know, but I would not use this product. Made the belt noise worse. Use the Prestone Belt dressing. It works wonderful. Take Care

Product features

Tite-Grip Belt Dressing

Eliminates Slippage to Stop Belt Squeal!

Maximizes Power Transfer for Better Fan, Power Steering, Alternator, and Drive Motor Efficiency!

Extends Belt Life By Allowing Reduced Operating Tension!

Compatible With Most Flat, Round and V-Belts/Trapezoidal Rubber Belts!

Designed to Work in All Conditions - Waterproof and Weatherproof!

Berryman Products was founded in 1918 and is family owned!

In the new millennium, Berryman has continued to introduce new products such as B-12 Chemtool Total Fuel System Cleanup, B-12 Chemtool Professional 3-Step Fuel System Maintenance Kit, and Environmentally Responsible products such as B-33 Engine Degreaser and B-104 Lemon Fresh Towelettes.

After 100 years in business, we are especially grateful to our customers who make us what we are today. We commit to continue providing products that meet the highest quality standards of performance, reliability and environmental responsibility.

Product description

**NEW** Replacement Rubber Belt Craftsman Drill Press 15 1/2 , 1/2hp motor w/ 45 inch 3/16 top width V-Belt V Belt Drill Press

• Craftsman Drill Press 15 1/2 , 1/2hp motor w/ 45 inch 3/16 top width V-Belt
• V Belt Drill Press
• Best Deals By West Coast Resale

User questions & answers

Question:	Does this fit model 113.21370? i have have a goodyear belt that fits part 5mr
Answer:	Yes indeed, my Labrador mix has thick nails and these do the trick. Just be ready to apply firm pressure and the nail will cut right off with no discomfort to the animal. Distracting with treats also helps.
Question:	Does this fit model
Answer:	I am an averaged sized women and these clippers fit comfortably in my hand as well as in my husbands hand. My dog is a Shih Tzu mix she is 15 lbs and these worked great for her. The clippers are nice and sharp and feel pretty heavy duty so I think they would work well on both large and small dogs.
Question:	Will this fit a Wen 4208 drill press
Answer:	I have 2 Great Danes, 2 80lb pitbulls, black & tan coonhound, and a small mix. I use these clippers on all of the dogs. Clipping the nails of my 183lb Great Dane is extremely challenging but these clippers do a good job cutting through her claws evenly. I also used these on my bullmastiff (who just passed away) and the clippers worked great with her nails.
Question:	Need a belt for Craftsman drill press model 113.24591. Can you help me
Answer:	Nothing is going to keep you from cutting to the quick. The safety guard is simply a metal panel in front of the blades that keeps you from pushing the nail through and cutting off more than about 6 centimeters. You can move it out of the way if you need to, but I think the point of it is to cut an equal length from each nail, 6cm at a time. If the nails are overgrown, cut once, then again a few days later to give the quick time to recede, then cut them again. Repeat if necessary. Instructions that come with the tool are vague, but apparently there is some kind of oil you can use that makes the nail a bit more translucent so you can see the quick. I'll post a photo of the instructions in an Imgur link below. I haven't tried it because my dog has solid black nails nails & it wouldn't work anyway. I think the tool would work for any size dog, cat, rabbit, guinea pig, etc. for my toy poodles, I don't find it necessary to unlock the tool to open wider. I simply stick their nail into the little chamber and squeeze the handle. Quick and Easy - and I have squirmy dogs that don't like their paws handled. Instructions on package: http://imgur.com/JfTkz32Or here: http://i.imgur.com/JfTkz32.jpg

Product description

Item: V Belt 1/2-inches x 5-feet, Type A

Material: Polyester/Polyurethane Composite

Feature:

Save Time - No wasted time dismantling drive components.

Easy Installation - Belts are made to the required length by hand and roll on to the drive, no tools required.

Longer Belt Life - Extremely high strength and low elongation under load results in increased belt longevity and durability

Reduce vibration - Smooth running with less vibration than solid belts.

Their unique "quick connect" belt design provides easier and faster belt installation, even on captured or restricted access drives — no tools

 required! Belts are easily made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. 

No need to dismantle drive components or change existing pulleys as PowerTwist V-Belts run in industry standard pulley grooves.

Package Included:

1 Pcs Adjustable Link V-Belt(1/2-Inch x 5 Feet)

Money Back Guarantee:

Non-original aftermarket part.

If you are not completely satisfied with our product after you puchase, you can ask for a replacement or full refund.

• ♛Power Twist V Belt 0.5 inches x 5-feet, Adjustable length, A Type Industrial Transmission V Belt .
• ♛Perfect for lathes, drill press, table saws, bandsaws and other woodworking machinery,Agricultural Equipment, snow blower,warehouse and packaging system
• ♛Special PU linked V belt is made of polyurethane and polyester composites, durable. Well-tested by the manufacturer. The long-lasting upgrade to rubber belts in any power transmission applications.
• ♛Good performance on reducing vibration & Low elongation than other normal belt. Extremely high strength and low elongation under load results in increased belt longevity and durability.
• ♛No tools required, easy installation in minutes without dismantling drive system components.

Product description

Made from high performance polyurethane elastomers reinforced with multiple plies of polyester fabric fenner drives' composite v-belts offer problem solving alternatives to conventional endless rubber v-belts of classical and metric sp wedge cross sections. Belts are of unique designs & incorporate custom composite materials which provide a number of time & cost saving benefits to maintenance engineers & equipment designers: longer belt life easier & faster installation reduced v-belt inventory -inches downtime-inch maintenance simplified drive design reduced drive vibration. Type a. Size: 1/2 inch by 4 feet.

• Perfect for lathes, table saws, bandsaws and other woodworking tools
• Smooth running with less vibration than solid belts
• Made in the United States
• Adjustable length

User questions & answers

Question:	can you adjust this belt to 1/2 sizes? I have 35" belt and think I need
Answer:	No, the links are 3/4". Therefore, if you want a 34.5" belt you'll need 46 links. 34.5/.75=46
Question:	What belt can replace a flat serpentine belt
Answer:	This is a v belt, not flat or serpentine. I use to reduce vibration on tools, it’s not necessary for automotive
Question:	Do you have to change out the pullys? I have an old craftsman 113.298032 10 inch table saw
Answer:	In case you want to change the pulleys you might look at In-Line Industries. They have kits for 113 saws.
Question:	I need a 51-1/2" belt. I have an 8" piece of this same belt leftover from a previous purchase. Can I just use it to make up the 3-1/2" difference
Answer:	Sure can, that's a great feature of this type of belt. You can make it as long or as short as you need (within reason).

Product description

The Insta-Power classical profile V-belt has a 0.50" top width, is 0.31" high, is built by Continental ContiTech with Flexten tension members, and is suitable for lawn and garden drives up to 20 horsepower where reverse- and quarter-turn drives are a factor. The belt is static conductive, making it appropriate in the presence of explosive gases, liquids, powders, and other substances where the possibility of static sparks must be kept to a minimum.

The Insta-Power V-Belt is built with Flexten tension members made from aramid, a heat-resistant synthetic fiber five times stronger than steel. Flexten tension members increase tensile strength and reduce initial elongation by 50 percent to maintain dimensional stability so that drive performance is more consistent over the life of the belt. The belt is backed in oil- and abrasion-resistant fabric, providing longitudinal flexibility and lateral strength.

Traditional classical belts are designed for operating at higher speeds over small diameter pulleys and short-center distances. They can be used in multiple V-belt drives and are used frequently in abusive environments such as farming and manufacturing. They are constructed to withstand the heat of the outdoors and oily, dirt-filled manufacturing environments.

As a part of the Continental Corporation, the ContiTech division numbers among the leading suppliers of a host of technical rubber products and is a specialist for plastics technology. ContiTech develops, produces and markets high-tech products and systems for the automotive and industrial markets

• Flexten classical profile construction
• High-strength Flexten tensile members
• Engineered rubber cushion compound
• Premium envelope construction
• Oil, heat, ozone, and abrasion resistant; static conductive

Product description

The belts exceed USA RMA published ratings levels. They are designed to perform at the identical or higher level than all other major USA Manufacturer's belts of the same Type.

Product description

The belts exceed USA RMA published ratings levels. They are designed to perform at the identical or higher level than all other major USA Manufacturer's belts of the same Type.

Product description

Belt 3VX 3/8 x 36.5in OC.