12 best brady laminatings

Product description

Brady PWC-PK-1/35400 write-on self-laminating wire and cable markers. Size 0.75" width, 1.75" height (19mm width, 44.4mm height), Legend "(BLANK)", white color, material B-292 self-laminating vinyl. Print technology dot matrix, material type translucent vinyl, finish provided in a self-laminated format with a white printable zone and a translucent overlaminating area. Adhesive permanent acrylic. Recommended ribbons brady series R2000, R5000 and R7300 black for dot matrix printing. Regulatory/agency approvals B-292 is UL recognized to UL969 labeling and marking standard when printed with the brady series R2000, R5000, and R7300 dot matrix ribbons. See UL files MH10939 for specific details. Brady B-292 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.

• Transparent portion of label over-wraps provides a snug fitting, self-laminating shield that resists oil, water and solvents
• Labels can be used for applications above or below ground
• Three different marker sizes are available to suit all of your labeling needs
• B-292 is an excellent material for wire and cable identification, this material has good clarity, conformability and is self-extinguishing
• B-292 has outstanding water and oil resistance

User questions & answers

Question:	Is its 10 packs of 120 labels, so 1200 labels in all
Answer:	Yes, it is adjustable. Thank you,

Product description

This B-427 Self-Laminating Vinyl material provides a protective layer over text for excellent abrasion, dirt, oils, solvents, water and excess handling resistance

• Self-laminating vinyl labels are ideal for use in cable and wire labeling, voice-data identification, and panel marking
• Permanent acrylic tape adheres well to surfaces that are smooth, rough or powder coated, and to irregular surfaces or surfaces with low surface energy
• Printable white zone with self-lamination prints on a white background with translucent overlaminating area to protect text
• UL approved;CSA accepted
• For use with BMP41 Label Printer, BMP51 Label Printer, BMP53 Label Printer

Product description

This B-427 Self-Laminating Vinyl material provides a protective layer over text for excellent abrasion, dirt, oils, solvents, water and excess handling resistance

• Self-laminating vinyl labels are ideal for use in cable and wire labeling, voice-data identification, and panel marking
• Permanent acrylic tape adheres well to surfaces that are smooth, rough or powder coated, and to irregular surfaces or surfaces with low surface energy
• Printable white zone with self-lamination prints on a white background with translucent overlaminating area to protect text
• UL approved;CSA accepted
• For use with BMP41 Label Printer, BMP51 Label Printer, BMP53 Label Printer

Product description

This B-427 Self-Laminating Vinyl material provides a protective layer over text for excellent abrasion, dirt, oils, solvents, water and excess handling resistance

• Self-laminating vinyl labels are ideal for use in cable and wire labeling, voice-data identification, and panel marking
• Permanent acrylic tape adheres well to surfaces that are smooth, rough or powder coated, and to irregular surfaces or surfaces with low surface energy
• Printable white zone with self-lamination prints on a white background with translucent overlaminating area to protect text
• UL approved;CSA accepted
• For use with BMP41 Label Printer, BMP51 Label Printer, BMP53 Label Printer

Product description

Self-Laminating Vinyl (B-427) is an excellent material for wire and cable identification. This material has good clarity, conformability and is self-extinguishing.

From the Manufacturer

Self-Laminating Cable & Wire Labels (B-427)

• Conformable material designed to adhere to highly curved surfaces, wires and cables
• Features a white printable area with clear “tail” that wraps around marker
• Clear tail serves as over-laminate to protect the text, providing superior resistance to abrasion, dirt, oils, solvents, water and excessive handling
• This material has good clarity, conformability and is self-extinguishing
• Service temp: -40ºF to 158ºF Application temp: 50ºF to 158ºF

Material Description

• Print Technology: Thermal Transfer
• Material Type: Translucent vinyl
• Finish: Provided in a self-laminated format with a white printable zone and a translucent overlaminating area.
• Adhesive: Permanent acrylic

Applications

• Wire and cable identification

Recommended Thermal Transfer Ribbons

Thermal transfer ribbons are only needed for labels that do not have self-contained print ribbons

• Brady Series R4300 - Black
• Brady Series R4500 - Red, Blue, Green
• Brady Series R6200

Regulatory/Agency Approvals

• UL: Recognized to UL969 Labeling and Marking Standard when printed with the Brady Series R4300 and R6200 ribbons. See UL files MH17154 for specific details
• RoHS: Compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC

Material Details

About Brady

Brady Corporation manufactures signs, tags, printers, and other industrial safety and identification products. Brady was founded in 1914, is headquartered in Milwaukee, Wisconsin, and meets International Organization for Standardization (ISO) 9000 standards. Visit the Brady Label Finder Store to find a labels for your printer

• Provided in a self-laminated format with a white printable zone and translucent overlaminating area to protect text
• Durable, permanent acrylic adhesive has outstanding water and oil resistance
• UL approved
• All-in-one cartridge includes label supply and R4300 Series ribbon
• For use with IDXPERT Handheld Labeler

User questions & answers

Question:	how many tags per cardrigde
Answer:	Hi Elosinvi! This is Lauren from Brady. This cartridge (XSL-11-427) is only compatible with our IDXPERT Handheld Label Maker. However, we do offer similar self-laminating vinyl tapes for our BMP21 and BMP21-PLUS printers. Our Brady Customer Support team would be happy to help you find the best cartridges for your application. They can be reached at 1-888-250-3082. Thank you for your question!
Question:	Are these compatible with the BMP
Answer:	Hi Joe! This is Lauren from Brady. Our PWC-PK-1 pack is sold as a pack of 10 cards with 12 cards per sheet. So, the total label quantity is 120. Thank you for your question!

Product description

Cartridge Label Color White on Translucent Legend Blank Width 1-1/2 In. Height 6 In. Material Self Laminating Vinyl Max Wire Size 1 AWG For Use With BMP71 Printer and Ribbon Mfr No M71-R4300 Labels per Roll 50 Temp Range -40 Degrees to 158 Degrees F Standards ASTM D 1000 ASTM D 2979 ASTM G 155 UL Recognized

• Mexico

Product description

Brady leads the way in high performance identification solutions.



At Brady, we have a steadfast commitment to providing our customers with innovative products and identification solutions. We use customer feedback to continually design, improve, and innovate our products to serve all of your needs, from general identification solutions to custom-engineered labels.



Material developed in-house, by our experts.



Highly focused on identification solutions, Brady's team of scientists and engineers work to provide you with products of the highest technological quality. At Brady's Tobey Research Center, material scientists rigorously test all label materials in-house to ensure high performance, industry compliance, durability, and reliability.

• More than 200 technologists in laboratory sites around the world
• More than 20 label material patents and growing
• Electro-mechanical, materials, and software development teams

Materials designed to last and engineered to perform.



The materials developed by Brady scientists are designed for a wide spectrum of applications and environments. Brady's in-depth knowledge of the conditions that products face requires extensive testing in harsh environments.



Our products are not only designed to withstand the harshest of environments, but also designed with the user in mind. We spend time getting to know our customers in order to understand your needs.

• Made from Brady's B 427 Self Laminating Vinyl material, which provides a protective layer over text for excellent resistance to abrasion, dirt, oils, solvents, water and excess handling
• Labeling tape with self laminating vinyl for multiple use cases including cable and wire labeling, voice data identification, and panel marking
• Permanent acrylic tape adheres well to surfaces that are smooth, rough, highly textured, or powder coated, as well as to irregular surfaces or surfaces with low surface energy
• Labeling tape with a self laminated format with a white printable zone, prints in black text on a white background with translucent overlaminating area
• RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC; UL approved; CSA accepted

User questions & answers

Question:	can you write on them with permanent marker
Answer:	Yes. Best labeling solution for network cabling I have seen, puts Ptouch to shame!
Question:	are these labels compatible with the BMP-21 Plus
Answer:	Hi! This is Lauren from Brady. This cartridge contains a continuous roll of 14 feet, so the printer will automatically cut the labels based on the length of text you input. The printable area height is .375 inches. Thank you for your question!
Question:	How many labels are in each cartridge
Answer:	The color of the label is white, the yellow thing that shows on the picture is the protective cover for the adhesive and needs to come off when you apply the label.
Question:	Are this lable is color yellow tape? and works for bmp21-plus
Answer:	It's Black on White. No orange.

Product features

When performance matters, choose only Brady AUTHENTIC Cartridges designed and assembled by Brady!

Self-Laminating Wire Wrap (B-427)

Brady’s self-laminating vinyl material is excellent for wire and cable identification. Designed with a clear protective layer to cover the printed text, B-427 material provides superb protection from abrasion, dirt, oils, solvents, water and excess handling.

CONTROL PANELS

Use when label control panel components and wires

ELECTRICAL PANELS

Use for labeling on both inside and outside and electrical panel

DATACOM

Use when labeling cables and racking in data centers and closets

LABORATORY ID

Use when labeling wires and Use for labeling lab supplies like vials and tubes

Product description

tape have 3/4" wide, total. That leaves 3/8" or so on the upper half for printing and 3/8" of clear tail on the lower half to wrap around the wire. Ideal for 1/8 "and smaller diameter wires

Material Description：

Label/Tape Size：0.75 in W x 14 ft L

printable area：0.375" height

Roll Length：14 ft

Roll Width：0.75 in / 3/4in

Marking Color：Black

Material：Self-laminating Translucent Vinyl

Ribbon Color ：Black

Tape Color：White

• This Self-Laminating Vinyl material provides a protective layer over text for excellent abrasion, dirt, oils, solvents, water and excess handling resistance
• Self-laminating vinyl labels are ideal for use in cable and wire labeling, voice -data identification, and panel marking，tape have 3/4" wide, total. That leaves 3/8" or so on the upper half for printing and 3/8" of clear tail on the lower half to wrap around the wire. Ideal for 1/8 "and smaller diameter wires
• Permanent acrylic tape adheres well to surfaces that are smooth, rough or powder coated, and to irregular surfaces or surfaces with low surface energy
• Printable white zone with self-lamination prints on a white background with translucent overlaminating area to protect text
• NOT OEM Labels: They are perfectly replaced for the original tapes.Please contact us via email if any problem occur.

Product description

Brady B-361 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC. Special Features: Brady B-361B is used in a self-laminating format which has a white printable or write-on zone and a translucent overlaminating area. Brady B-361B has good print smudge resistance, solvent resistance, and elevated temperature performance.

• Made from Brady's B-361B polyester material with a clear self-laminating film and matte white printable or writing zone
• Good smudge resistance, solvent resistance and elevated temperature performance
• Self-laminating surface protects printed text and writing in harsh environments both indoors and outdoors
• Compatible with common laser printers for convenient easy to print labels
• Labels are RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC

User questions & answers

Question:	is there a suggested printer that works best with these labels
Answer:	250 pcs

Product description

Brady B-361 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC. Special Features: Brady B-361B is used in a self-laminating format which has a white printable or write-on zone and a translucent overlaminating area. Brady B-361B has good print smudge resistance, solvent resistance, and elevated temperature performance.

• Blank, printable polyester labels for laser printers
• Brady B-361B clear polyester is used for wire and cable identification
• Used in a self-laminating format which has a white printable or write-on zone and a translucent overlaminating area
• RoHS compliant

Product description

Brady leads the way in high performance identification solutions.



At Brady, we have a steadfast commitment to providing our customers with innovative products and identification solutions. We use customer feedback to continually design, improve, and innovate our products to serve all of your needs, from general identification solutions to custom-engineered labels.



Material developed in-house, by our experts.



Highly focused on identification solutions, Brady's team of scientists and engineers work to provide you with products of the highest technological quality. At Brady's Tobey Research Center, material scientists rigorously test all label materials in-house to ensure high performance, industry compliance, durability, and reliability.

• More than 200 technologists in laboratory sites around the world
• More than 20 label material patents and growing
• Electro-mechanical, materials, and software development teams

Materials designed to last and engineered to perform.



The materials developed by Brady scientists are designed for a wide spectrum of applications and environments. Brady's in-depth knowledge of the conditions that products face requires extensive testing in harsh environments.



Our products are not only designed to withstand the harshest of environments, but also designed with the user in mind. We spend time getting to know our customers in order to understand your needs.

• Made from Brady's B-342 Polyolefin PermaSleeve Marker material, a non-adhesive, heat-shrinking sleeve that fits around wires or cables for insulation and easy permanent identification.
• 3:1 heat-shrinking wire marking sleeve is ideal for labeling in harsh environments and is resistant to exposure to chemicals, grease, oil, and cleaning agents.
• Polyolefin wire marking sleeves print in black text on a white background with a smudge-proof finish.
• Permasleeve labels provide a wire marking solution that combines speed, ease of use, and permanence to create long-lasting, high quality identification.
• Compatible with the BMP21-PLUS or ID PAL label printers, permasleeve wire labels are an indispensable asset for electrical contractors, maintenance crews, construction teams, and industrial professionals.
• Always use official Brady labels designed for use with BMP21-PLUS, BMP21-LAB, IDPAL and LABPAL Label Printers

User questions & answers

Question:	Will the m21-250-c-342 fit around a romex (nm) cable of 12 or 14 gauge
Answer:	Hi Patrick! This is Lauren from Brady. This product is manufactured in a continuous 7 foot roll. Your Brady printer will cut the heat shrink sleeve to the appropriate length after your printing is complete. Thank you for your question!
Question:	How many cartridges are in a unit
Answer:	This is a shrink tube. Total length is 7', tube width a little over a 5/16". I'm not sure what is .187" indicating.
Question:	It says at the title that the width is 0.335" and in the specifications 0.187" (Im looking for the second one) but I have this problem with the specs
Answer:	It shrinks to about a 1/4 of its size
Question:	what size (diameter) wires is this suitable for
Answer:	Hello Garry. The manufacturer confirmed that any laser printer will work.

Product features

When performance matters, choose only Brady AUTHENTIC Cartridges designed and assembled by Brady!

PermaSleeve Heat Shrink Tubing (B-342)

Designed for rigorous wire marking applications, PermaSleeve PS Heat Shrink Polyolefin (B-342) sleeves combine speed, ease of use, and permanence to create high quality labeling.

CONTROL PANELS

Use when label control panel components and wires

ELECTRICAL PANELS

Use for labeling on both inside and outside and electrical panel

WIRE HARNESSES

Use on both assembly and service labeling of wire harnesses

DATACOM

Use when labeling cables and racking in data centers and closets

Product description

Brady B-361 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC. Special Features: Brady B-361B is used in a self-laminating format which has a white printable or write-on zone and a translucent overlaminating area. Brady B-361B has good print smudge resistance, solvent resistance, and elevated temperature performance.

• Made from Brady's B-361B polyester material with a clear self-laminating film and matte white printable or writing zone
• Good smudge resistance, solvent resistance and elevated temperature performance
• Self-laminating surface protects printed text and writing in harsh environments both indoors and outdoors
• Compatible with common laser printers for convenient easy to print labels
• Labels are RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC

User questions & answers

Question:	I want the template for this label
Answer:	Part# LAT-19-361-1 is supplied 21 labels per sheet.
Question:	Is the photo of the product accurate? I'm looking for these labels that are 21 per sheet. The measurements look to be correct but I want to be sure
Answer:	Dear Amazon Customer, please note that both part numbers LAT-15-361-1 and LAT-19-361-1 have the same pictures on the manufacturer's website. You can check the products specifications and decide which part number is acceptable for you by the links below: https://www.bradyid.com/en-us/product/lat-19-361-1 https://www.bradyid.com/en-us/product/lat-15-361-1
Question:	The photo is lat-15-361 (156 shorter labels per sheets), but the description is lat-19-361 (21 longer labels per sheet). which item will i get
Answer:	No